summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorDuncan Laurie <dlaurie@chromium.org>2012-05-25 10:04:17 -0700
committerRonald G. Minnich <rminnich@gmail.com>2012-07-24 00:02:55 +0200
commitda83a5f18e252e4b8e6259fd7c91e67ca25ee6cd (patch)
tree043595fa54f93722ccc415870e3b685e7498db2a /src
parentac2ec34fd28dad54269774b3881bc7aebfb40229 (diff)
downloadcoreboot-da83a5f18e252e4b8e6259fd7c91e67ca25ee6cd.tar.xz
Fixes to enable RC6 on IvyBridge
- The unneeded poll on non-MT force-wake bit was timing out and causing the gma_pm_init_pre_vbios() function to exit early so it was not preparing PM registers properly. I changed the gtt_poll() calls to not return on timeout unless it can't proceed so we don't see half-initialized registers. - RC6+ (Deep Render Standby) is not working reliably so we can just enable RC6 in the BIOS and let the kernel decide if it wants to enable RC6+ later. This Kernel message is new in kernel 3.4: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off Change-Id: I69d005ba56be8c7684a4ea1133a1d761f7c07acc Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1268 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Diffstat (limited to 'src')
-rw-r--r--src/northbridge/intel/sandybridge/gma.c59
1 files changed, 21 insertions, 38 deletions
diff --git a/src/northbridge/intel/sandybridge/gma.c b/src/northbridge/intel/sandybridge/gma.c
index 499f347007..9a8b6317ef 100644
--- a/src/northbridge/intel/sandybridge/gma.c
+++ b/src/northbridge/intel/sandybridge/gma.c
@@ -374,19 +374,11 @@ static void gma_pm_init_pre_vbios(struct device *dev)
if (bridge_silicon_revision() < IVB_STEP_C0) {
/* 1: Enable force wake */
gtt_write(0xa18c, 0x00000001);
- if (!gtt_poll(0x130090, (1 << 0), (1 << 0)))
- return;
+ gtt_poll(0x130090, (1 << 0), (1 << 0));
} else {
gtt_write(0xa180, 1 << 5);
gtt_write(0xa188, 0xffff0001);
- if (!gtt_poll(0x130040, (1 << 0), (1 << 0)))
- return;
- /*
- * HACK: also poll on 0x130090, for some reason graphics does
- * not work on all SKUs unless this register is polled at boot.
- */
- if (!gtt_poll(0x130090, (1 << 0), (1 << 0)))
- return;
+ gtt_poll(0x130040, (1 << 0), (1 << 0));
}
if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_SNB) {
@@ -432,7 +424,7 @@ static void gma_pm_init_pre_vbios(struct device *dev)
gtt_write_powermeter(ivb_pm_gt2_17w);
} else if ((tdp >= 25) && (tdp <= 35)) {
/* 25W-35W */
- printk(BIOS_DEBUG, "IVB GT2 35W "
+ printk(BIOS_DEBUG, "IVB GT2 25W-35W "
"Power Meter Weights\n");
gtt_write_powermeter(ivb_pm_gt2_35w);
} else {
@@ -472,8 +464,7 @@ static void gma_pm_init_pre_vbios(struct device *dev)
reg32 &= 0xf;
reg32 |= (1 << 1);
gtt_write(0x941c, reg32);
- if (!gtt_poll(0x941c, (1 << 1), (0 << 1)))
- return;
+ gtt_poll(0x941c, (1 << 1), (0 << 1));
}
if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_IVB) {
@@ -489,15 +480,13 @@ static void gma_pm_init_pre_vbios(struct device *dev)
}
/* 7 */
- if (!gtt_poll(0x138124, (1 << 31), (0 << 31)))
- return;
- gtt_write(0x138128, 0x00000029); /* Mailbox Data */
- gtt_write(0x138124, 0x80000004); /* Mailbox Cmd for RC6 VID */
- if (!gtt_poll(0x138124, (1 << 31), (0 << 31)))
- return;
- gtt_write(0x138124, 0x8000000a); /* Mailbox Cmd to clear RC6 count */
- if (!gtt_poll(0x138124, (1 << 31), (0 << 31)))
- return;
+ if (gtt_poll(0x138124, (1 << 31), (0 << 31))) {
+ gtt_write(0x138128, 0x00000029); /* Mailbox Data */
+ gtt_write(0x138124, 0x80000004); /* Mailbox Cmd for RC6 VID */
+ if (gtt_poll(0x138124, (1 << 31), (0 << 31)))
+ gtt_write(0x138124, 0x8000000a);
+ gtt_poll(0x138124, (1 << 31), (0 << 31));
+ }
/* 8 */
gtt_write(0xa090, 0x00000000); /* RC Control */
@@ -530,8 +519,13 @@ static void gma_pm_init_pre_vbios(struct device *dev)
/* 11a: Enable Render Standby (RC6) */
if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_IVB) {
- /* on IVB: also enable DeepRenderStandby */
- gtt_write(0xa090, 0x88060000); /* HW RC Control */
+ /*
+ * IvyBridge should also support DeepRenderStandby.
+ *
+ * Unfortunately it does not work reliably on all SKUs so
+ * disable it here and it can be enabled by the kernel.
+ */
+ gtt_write(0xa090, 0x88040000); /* HW RC Control */
} else {
gtt_write(0xa090, 0x88040000); /* HW RC Control */
}
@@ -566,22 +560,11 @@ static void gma_pm_init_post_vbios(struct device *dev)
/* 15: Deassert Force Wake */
if (bridge_silicon_revision() < IVB_STEP_C0) {
gtt_write(0xa18c, gtt_read(0xa18c) & ~1);
- if (!gtt_poll(0x130090, (1 << 0), (0 << 0))) {
- return;
- }
+ gtt_poll(0x130090, (1 << 0), (0 << 0));
} else {
gtt_write(0xa188, 0x1fffe);
- if (!gtt_poll(0x130040, (1 << 0), (0 << 0))) {
- return;
- }
- /*
- * HACK: also poll on 0x130090, for some reason graphics does
- * not work on all SKUs unless this register is polled at boot.
- */
- if (!gtt_poll(0x130090, (1 << 0), (0 << 0))) {
- return;
- }
- gtt_write(0xa188, gtt_read(0xa188) | 1);
+ if (gtt_poll(0x130040, (1 << 0), (0 << 0)))
+ gtt_write(0xa188, gtt_read(0xa188) | 1);
}
/* 16: SW RC Control */