diff options
author | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2014-07-21 19:35:16 +0300 |
---|---|---|
committer | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2014-07-24 13:59:22 +0200 |
commit | 0c797f1c28cd16c64482b2cea554e89baaa31445 (patch) | |
tree | 0eb73249b03eb0609e350250c32b4f0bdab3bcaf /src | |
parent | 0ff17c9cae11b46535b99880f013d0ca084ea1f8 (diff) | |
download | coreboot-0c797f1c28cd16c64482b2cea554e89baaa31445.tar.xz |
AGESA: Drop offset on PCI device enumeration
Integrated PCI devices in southbridge silicon have static BDFs,
no need to have variables to store the parent bus or an offset
with constant zero.
Change-Id: I37d3794d36b5e5775da9215574ddc199696646d0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6333
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Diffstat (limited to 'src')
44 files changed, 104 insertions, 395 deletions
diff --git a/src/mainboard/amd/dinar/get_bus_conf.c b/src/mainboard/amd/dinar/get_bus_conf.c index 3104b73cd4..5ab2ddd5b2 100644 --- a/src/mainboard/amd/dinar/get_bus_conf.c +++ b/src/mainboard/amd/dinar/get_bus_conf.c @@ -32,25 +32,6 @@ */ u8 bus_sb700[2]; -/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* - * HT Chain device num, actually it is unit id base of every ht device in chain, - * assume every chain only have 4 ht device at most - */ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_sb700; - void get_bus_conf(void) { device_t dev; @@ -58,17 +39,14 @@ void get_bus_conf(void) printk(BIOS_DEBUG, "Mainboard - Get_bus_conf.c - get_bus_conf - Start.\n"); - sbdn_sb700 = 0; for (i = 0; i < ARRAY_SIZE(bus_sb700); i++) { bus_sb700[i] = 0; } - bus_sb700[0] = (pci1234x[0] >> 16) & 0xff; - /* sb700 */ - dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); diff --git a/src/mainboard/amd/dinar/irq_tables.c b/src/mainboard/amd/dinar/irq_tables.c index 865d264429..8242b4e911 100644 --- a/src/mainboard/amd/dinar/irq_tables.c +++ b/src/mainboard/amd/dinar/irq_tables.c @@ -43,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb700[2]; -extern unsigned long sbdn_sb700; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -70,8 +68,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb700[0]; - pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -87,7 +85,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/dinar/mptable.c b/src/mainboard/amd/dinar/mptable.c index 398ee86f34..d239a7e749 100644 --- a/src/mainboard/amd/dinar/mptable.c +++ b/src/mainboard/amd/dinar/mptable.c @@ -29,8 +29,6 @@ #include <cpu/amd/amdfam15.h> extern u8 bus_sb700[2]; -extern u32 sbdn_sb700; - static void *smp_write_config_table(void *v) { @@ -60,8 +58,7 @@ static void *smp_write_config_table(void *v) apicid_sb700 = CONFIG_MAX_CPUS + 1; apicid_rd890 = apicid_sb700 + 1; - //bus_sb700[0], TODO: why bus_sb700[0] use same value of bus_rd890[0] assigned by get_pci1234(), instead of 0. - dev = dev_find_slot(0, PCI_DEVFN(sbdn_sb700 + 0x14, 0)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); if (dev) { /* Set sb700 IOAPIC ID */ dword = pci_read_config32(dev, 0x74) & 0xfffffff0; diff --git a/src/mainboard/amd/inagua/get_bus_conf.c b/src/mainboard/amd/inagua/get_bus_conf.c index c688791022..c39decfed7 100644 --- a/src/mainboard/amd/inagua/get_bus_conf.c +++ b/src/mainboard/amd/inagua/get_bus_conf.c @@ -33,17 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; -/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; - void get_bus_conf(void) { u32 apicid_base; @@ -52,23 +41,20 @@ void get_bus_conf(void) int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); - // bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/inagua/irq_tables.c b/src/mainboard/amd/inagua/irq_tables.c index 98d68d3736..305988b9c5 100644 --- a/src/mainboard/amd/inagua/irq_tables.c +++ b/src/mainboard/amd/inagua/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/olivehill/get_bus_conf.c b/src/mainboard/amd/olivehill/get_bus_conf.c index 508a73cfba..1dda593943 100644 --- a/src/mainboard/amd/olivehill/get_bus_conf.c +++ b/src/mainboard/amd/olivehill/get_bus_conf.c @@ -35,17 +35,6 @@ u8 bus_yangtze[6]; u32 apicid_yangtze; -/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_yangtze; - void get_bus_conf(void) { @@ -66,23 +55,20 @@ void get_bus_conf(void) value &= ~(1 << 11); pci_write_config32(dev, 0x60, value); - sbdn_yangtze = 0; memset(bus_yangtze, 0, sizeof(bus_yangtze)); - // bus_yangtze[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_yangtze[0] = (pci1234x[0] >> 16) & 0xff; /* yangtze */ - dev = dev_find_slot(bus_yangtze[0], PCI_DEVFN(sbdn_yangtze + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_yangtze[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_yangtze[0], PCI_DEVFN(sbdn_yangtze + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_yangtze[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/olivehill/irq_tables.c b/src/mainboard/amd/olivehill/irq_tables.c index 8dbea45ed4..22ed1ab0a8 100644 --- a/src/mainboard/amd/olivehill/irq_tables.c +++ b/src/mainboard/amd/olivehill/irq_tables.c @@ -43,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; } -extern u8 bus_yangtze[6]; -extern unsigned long sbdn_yangtze; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -69,8 +67,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_yangtze[0]; - pirq->rtr_devfn = ((sbdn_yangtze + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -85,7 +83,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0; /* pci bridge */ - write_pirq_info(pirq_info, bus_yangtze[0], ((sbdn_yangtze + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/parmer/get_bus_conf.c b/src/mainboard/amd/parmer/get_bus_conf.c index 490e3c200d..8dcd4e5593 100644 --- a/src/mainboard/amd/parmer/get_bus_conf.c +++ b/src/mainboard/amd/parmer/get_bus_conf.c @@ -35,17 +35,6 @@ u8 bus_hudson[6]; u32 apicid_hudson; -/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_hudson; - void get_bus_conf(void) { @@ -56,23 +45,21 @@ void get_bus_conf(void) - sbdn_hudson = 0; memset(bus_hudson, 0, sizeof(bus_hudson)); - bus_hudson[0] = (pci1234x[0] >> 16) & 0xff; /* Hudson */ - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_hudson[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_hudson[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/parmer/irq_tables.c b/src/mainboard/amd/parmer/irq_tables.c index 19f800743f..013941ca56 100644 --- a/src/mainboard/amd/parmer/irq_tables.c +++ b/src/mainboard/amd/parmer/irq_tables.c @@ -43,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; } -extern u8 bus_hudson[6]; -extern unsigned long sbdn_hudson; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -69,8 +67,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_hudson[0]; - pirq->rtr_devfn = ((sbdn_hudson + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -85,7 +83,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0; /* pci bridge */ - write_pirq_info(pirq_info, bus_hudson[0], ((sbdn_hudson + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/persimmon/get_bus_conf.c b/src/mainboard/amd/persimmon/get_bus_conf.c index 412744c463..9434429f5a 100644 --- a/src/mainboard/amd/persimmon/get_bus_conf.c +++ b/src/mainboard/amd/persimmon/get_bus_conf.c @@ -35,16 +35,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; u32 apicver_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; void get_bus_conf(void) { @@ -54,22 +44,19 @@ void get_bus_conf(void) int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); -// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/persimmon/irq_tables.c b/src/mainboard/amd/persimmon/irq_tables.c index 840e7b1bb5..12a64a8bcd 100644 --- a/src/mainboard/amd/persimmon/irq_tables.c +++ b/src/mainboard/amd/persimmon/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/south_station/get_bus_conf.c b/src/mainboard/amd/south_station/get_bus_conf.c index f221a4591f..53c7953f3c 100644 --- a/src/mainboard/amd/south_station/get_bus_conf.c +++ b/src/mainboard/amd/south_station/get_bus_conf.c @@ -33,16 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; void get_bus_conf(void) { @@ -52,16 +42,13 @@ void get_bus_conf(void) int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); -// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); @@ -70,7 +57,7 @@ void get_bus_conf(void) } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/south_station/irq_tables.c b/src/mainboard/amd/south_station/irq_tables.c index 840e7b1bb5..12a64a8bcd 100644 --- a/src/mainboard/amd/south_station/irq_tables.c +++ b/src/mainboard/amd/south_station/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/thatcher/get_bus_conf.c b/src/mainboard/amd/thatcher/get_bus_conf.c index b7d6d23d4a..c2dbacd1f4 100644 --- a/src/mainboard/amd/thatcher/get_bus_conf.c +++ b/src/mainboard/amd/thatcher/get_bus_conf.c @@ -35,17 +35,6 @@ u8 bus_hudson[6]; u32 apicid_hudson; -/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_hudson; - void get_bus_conf(void) { @@ -54,22 +43,20 @@ void get_bus_conf(void) device_t dev; int i; - sbdn_hudson = 0; memset(bus_hudson, 0, sizeof(bus_hudson)); - bus_hudson[0] = (pci1234x[0] >> 16) & 0xff; /* Hudson */ - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_hudson[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_hudson[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/thatcher/irq_tables.c b/src/mainboard/amd/thatcher/irq_tables.c index 19f800743f..013941ca56 100644 --- a/src/mainboard/amd/thatcher/irq_tables.c +++ b/src/mainboard/amd/thatcher/irq_tables.c @@ -43,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; } -extern u8 bus_hudson[6]; -extern unsigned long sbdn_hudson; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -69,8 +67,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_hudson[0]; - pirq->rtr_devfn = ((sbdn_hudson + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -85,7 +83,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0; /* pci bridge */ - write_pirq_info(pirq_info, bus_hudson[0], ((sbdn_hudson + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/torpedo/get_bus_conf.c b/src/mainboard/amd/torpedo/get_bus_conf.c index 3f8f50ed99..b88e3fbeb1 100644 --- a/src/mainboard/amd/torpedo/get_bus_conf.c +++ b/src/mainboard/amd/torpedo/get_bus_conf.c @@ -31,26 +31,6 @@ */ u8 bus_sb900[6]; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - - -u32 sbdn_sb900; - void get_bus_conf(void) { device_t dev; @@ -58,23 +38,21 @@ void get_bus_conf(void) printk(BIOS_DEBUG, "Mainboard - %s - %s - Start.\n", __FILE__, __func__); - sbdn_sb900 = 0; memset(bus_sb900, 0, sizeof(bus_sb900)); - bus_sb900[0] = (pci1234x[0] >> 16) & 0xff; /* sb900 */ - dev = dev_find_slot(bus_sb900[0], PCI_DEVFN(sbdn_sb900 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sb900[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb900[0], - PCI_DEVFN(sbdn_sb900 + 0x14, i)); + dev = dev_find_slot(0, + PCI_DEVFN(0x14, i)); if (dev) { bus_sb900[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); diff --git a/src/mainboard/amd/torpedo/irq_tables.c b/src/mainboard/amd/torpedo/irq_tables.c index f47d9dc4ff..c501125d06 100644 --- a/src/mainboard/amd/torpedo/irq_tables.c +++ b/src/mainboard/amd/torpedo/irq_tables.c @@ -45,8 +45,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb900[6]; -extern unsigned long sbdn_sb900; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -72,8 +70,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb900[0]; - pirq->rtr_devfn = ((sbdn_sb900 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -89,7 +87,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb900[0], ((sbdn_sb900 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/amd/union_station/get_bus_conf.c b/src/mainboard/amd/union_station/get_bus_conf.c index 0b55a2ac79..52b5d884a5 100644 --- a/src/mainboard/amd/union_station/get_bus_conf.c +++ b/src/mainboard/amd/union_station/get_bus_conf.c @@ -33,16 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; void get_bus_conf(void) { @@ -52,18 +42,15 @@ void get_bus_conf(void) int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); -// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); @@ -72,7 +59,7 @@ void get_bus_conf(void) } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/amd/union_station/irq_tables.c b/src/mainboard/amd/union_station/irq_tables.c index 840e7b1bb5..12a64a8bcd 100644 --- a/src/mainboard/amd/union_station/irq_tables.c +++ b/src/mainboard/amd/union_station/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/asrock/e350m1/get_bus_conf.c b/src/mainboard/asrock/e350m1/get_bus_conf.c index 255358836b..f2c8056df3 100644 --- a/src/mainboard/asrock/e350m1/get_bus_conf.c +++ b/src/mainboard/asrock/e350m1/get_bus_conf.c @@ -33,16 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; void get_bus_conf(void) { @@ -52,22 +42,19 @@ void get_bus_conf(void) int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); -// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/asrock/e350m1/irq_tables.c b/src/mainboard/asrock/e350m1/irq_tables.c index 840e7b1bb5..12a64a8bcd 100644 --- a/src/mainboard/asrock/e350m1/irq_tables.c +++ b/src/mainboard/asrock/e350m1/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/asrock/imb-a180/get_bus_conf.c b/src/mainboard/asrock/imb-a180/get_bus_conf.c index 8610e65999..17ff8a58c9 100644 --- a/src/mainboard/asrock/imb-a180/get_bus_conf.c +++ b/src/mainboard/asrock/imb-a180/get_bus_conf.c @@ -32,16 +32,7 @@ u8 bus_yangtze[6]; u32 apicid_yangtze; -/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; -u32 sbdn_yangtze; void get_bus_conf(void) { @@ -61,23 +52,20 @@ void get_bus_conf(void) value &= ~(1 << 11); pci_write_config32(dev, 0x60, value); - sbdn_yangtze = 0; memset(bus_yangtze, 0, sizeof(bus_yangtze)); - // bus_yangtze[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_yangtze[0] = (pci1234x[0] >> 16) & 0xff; /* yangtze */ - dev = dev_find_slot(bus_yangtze[0], PCI_DEVFN(sbdn_yangtze + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_yangtze[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_yangtze[0], PCI_DEVFN(sbdn_yangtze + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_yangtze[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/asrock/imb-a180/irq_tables.c b/src/mainboard/asrock/imb-a180/irq_tables.c index 29dc99913a..c1c25baf02 100644 --- a/src/mainboard/asrock/imb-a180/irq_tables.c +++ b/src/mainboard/asrock/imb-a180/irq_tables.c @@ -43,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; } -extern u8 bus_yangtze[6]; -extern unsigned long sbdn_yangtze; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -69,8 +67,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_yangtze[0]; - pirq->rtr_devfn = ((sbdn_yangtze + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -85,7 +83,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0; /* pci bridge */ - write_pirq_info(pirq_info, bus_yangtze[0], ((sbdn_yangtze + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/asus/f2a85-m/get_bus_conf.c b/src/mainboard/asus/f2a85-m/get_bus_conf.c index 389ab8f368..fe8253ee03 100644 --- a/src/mainboard/asus/f2a85-m/get_bus_conf.c +++ b/src/mainboard/asus/f2a85-m/get_bus_conf.c @@ -33,16 +33,7 @@ u8 bus_hudson[6]; u32 apicid_hudson; -/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; -u32 sbdn_hudson; void get_bus_conf(void) { @@ -51,23 +42,21 @@ void get_bus_conf(void) device_t dev; int i; - sbdn_hudson = 0; memset(bus_hudson, 0, sizeof(bus_hudson)); - bus_hudson[0] = (pci1234x[0] >> 16) & 0xff; /* Hudson */ - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_hudson[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_hudson[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/asus/f2a85-m/irq_tables.c b/src/mainboard/asus/f2a85-m/irq_tables.c index 8fb6ff35b2..0bab5c9ca5 100644 --- a/src/mainboard/asus/f2a85-m/irq_tables.c +++ b/src/mainboard/asus/f2a85-m/irq_tables.c @@ -20,6 +20,7 @@ #include <arch/pirq_routing.h> #include <console/console.h> #include <cpu/amd/amdfam15.h> +#include <device/pci_def.h> #include <stdint.h> #include <string.h> @@ -42,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; } -extern u8 bus_hudson[6]; -extern unsigned long sbdn_hudson; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -68,8 +67,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_hudson[0]; - pirq->rtr_devfn = ((sbdn_hudson + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -84,7 +83,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0; /* pci bridge */ - write_pirq_info(pirq_info, bus_hudson[0], ((sbdn_hudson + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/gizmosphere/gizmo/get_bus_conf.c b/src/mainboard/gizmosphere/gizmo/get_bus_conf.c index 646c543dba..2cc2c0c30f 100755 --- a/src/mainboard/gizmosphere/gizmo/get_bus_conf.c +++ b/src/mainboard/gizmosphere/gizmo/get_bus_conf.c @@ -34,17 +34,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; - void get_bus_conf(void) { @@ -53,24 +42,21 @@ void get_bus_conf(void) device_t dev; int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); -// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/gizmosphere/gizmo/irq_tables.c b/src/mainboard/gizmosphere/gizmo/irq_tables.c index 5ce2be932d..bb33568562 100755 --- a/src/mainboard/gizmosphere/gizmo/irq_tables.c +++ b/src/mainboard/gizmosphere/gizmo/irq_tables.c @@ -45,8 +45,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -72,8 +70,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -89,7 +87,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c b/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c index bd5026d136..ef4eeb883e 100644 --- a/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c +++ b/src/mainboard/hp/pavilion_m6_1035dx/get_bus_conf.c @@ -34,17 +34,6 @@ u8 bus_hudson[6]; u32 apicid_hudson; -/* - * Here you only need to set value in pci1234 for HT-IO that could be installed or not - * You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_hudson; - void get_bus_conf(void) { @@ -53,21 +42,19 @@ void get_bus_conf(void) device_t dev; int i; - sbdn_hudson = 0; memset(bus_hudson, 0, sizeof(bus_hudson)); - bus_hudson[0] = (pci1234x[0] >> 16) & 0xff; /* Hudson */ - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_hudson[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_hudson[0], PCI_DEVFN(sbdn_hudson + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_hudson[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c b/src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c index b0f2a15207..42364e959a 100644 --- a/src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c +++ b/src/mainboard/hp/pavilion_m6_1035dx/irq_tables.c @@ -20,6 +20,7 @@ #include <arch/pirq_routing.h> #include <cpu/amd/amdfam15.h> #include <console/console.h> +#include <device/pci_def.h> #include <string.h> #include <stdint.h> @@ -42,8 +43,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->rfu = rfu; } -extern u8 bus_hudson[6]; -extern unsigned long sbdn_hudson; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -68,8 +67,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_hudson[0]; - pirq->rtr_devfn = ((sbdn_hudson + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -84,7 +83,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0; /* pci bridge */ - write_pirq_info(pirq_info, bus_hudson[0], ((sbdn_hudson + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/jetway/nf81-t56n-lf/get_bus_conf.c b/src/mainboard/jetway/nf81-t56n-lf/get_bus_conf.c index 8bc5ddf811..cc3ffbbeb6 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/get_bus_conf.c +++ b/src/mainboard/jetway/nf81-t56n-lf/get_bus_conf.c @@ -36,17 +36,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; u32 apicver_sb800; -/** - * Here you only need to set value in pci1234 for HT-IO that could be - * installed or not. You may need to preset pci1234 for HTIO board, - * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - */ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; - void get_bus_conf(void) { @@ -55,22 +44,19 @@ void get_bus_conf(void) device_t dev; int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); -// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/jetway/nf81-t56n-lf/irq_tables.c b/src/mainboard/jetway/nf81-t56n-lf/irq_tables.c index 5205a46289..94a69f9b7c 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/irq_tables.c +++ b/src/mainboard/jetway/nf81-t56n-lf/irq_tables.c @@ -21,6 +21,7 @@ #include <arch/pirq_routing.h> #include <console/console.h> #include <cpu/amd/amdfam14.h> +#include <device/pci_def.h> #include <string.h> #include <stdint.h> @@ -43,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -70,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -86,7 +85,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0; /* PCI Bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/lippert/frontrunner-af/get_bus_conf.c b/src/mainboard/lippert/frontrunner-af/get_bus_conf.c index e736e54854..42270af68a 100644 --- a/src/mainboard/lippert/frontrunner-af/get_bus_conf.c +++ b/src/mainboard/lippert/frontrunner-af/get_bus_conf.c @@ -33,17 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; - void get_bus_conf(void) { @@ -52,23 +41,20 @@ void get_bus_conf(void) device_t dev; int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); -// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/lippert/frontrunner-af/irq_tables.c b/src/mainboard/lippert/frontrunner-af/irq_tables.c index 840e7b1bb5..12a64a8bcd 100644 --- a/src/mainboard/lippert/frontrunner-af/irq_tables.c +++ b/src/mainboard/lippert/frontrunner-af/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/lippert/toucan-af/get_bus_conf.c b/src/mainboard/lippert/toucan-af/get_bus_conf.c index 20dc3aea12..eb40c541ad 100644 --- a/src/mainboard/lippert/toucan-af/get_bus_conf.c +++ b/src/mainboard/lippert/toucan-af/get_bus_conf.c @@ -33,16 +33,6 @@ u8 bus_sb800[6]; u32 apicid_sb800; -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -u32 sbdn_sb800; void get_bus_conf(void) { @@ -51,22 +41,19 @@ void get_bus_conf(void) device_t dev; int i; - sbdn_sb800 = 0; memset(bus_sb800, 0, sizeof(bus_sb800)); -// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, i)); if (dev) { bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } diff --git a/src/mainboard/lippert/toucan-af/irq_tables.c b/src/mainboard/lippert/toucan-af/irq_tables.c index 840e7b1bb5..12a64a8bcd 100644 --- a/src/mainboard/lippert/toucan-af/irq_tables.c +++ b/src/mainboard/lippert/toucan-af/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sb800[6]; -extern unsigned long sbdn_sb800; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sb800[0]; - pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/supermicro/h8qgi/get_bus_conf.c b/src/mainboard/supermicro/h8qgi/get_bus_conf.c index 549334e793..8531e697a9 100644 --- a/src/mainboard/supermicro/h8qgi/get_bus_conf.c +++ b/src/mainboard/supermicro/h8qgi/get_bus_conf.c @@ -31,14 +31,12 @@ * and acpi_tables busnum is default. */ u8 bus_sp5100[2]; -u32 sbdn_sp5100; void get_bus_conf(void) { device_t dev; int i; - sbdn_sp5100 = 0; for (i = 0; i < ARRAY_SIZE(bus_sp5100); i++) { bus_sp5100[i] = 0; @@ -47,7 +45,7 @@ void get_bus_conf(void) bus_sp5100[0] = 0; /* sp5100 */ - dev = dev_find_slot(bus_sp5100[0], PCI_DEVFN(sbdn_sp5100 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sp5100[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); diff --git a/src/mainboard/supermicro/h8qgi/irq_tables.c b/src/mainboard/supermicro/h8qgi/irq_tables.c index 6b1e226007..0af225c9dd 100644 --- a/src/mainboard/supermicro/h8qgi/irq_tables.c +++ b/src/mainboard/supermicro/h8qgi/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sp5100[2]; -extern unsigned long sbdn_sp5100; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sp5100[0]; - pirq->rtr_devfn = ((sbdn_sp5100 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sp5100[0], ((sbdn_sp5100 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/supermicro/h8qgi/mptable.c b/src/mainboard/supermicro/h8qgi/mptable.c index 754ed549bf..3793212711 100644 --- a/src/mainboard/supermicro/h8qgi/mptable.c +++ b/src/mainboard/supermicro/h8qgi/mptable.c @@ -29,7 +29,6 @@ #include <cpu/amd/amdfam10_sysconf.h> extern u8 bus_sp5100[2]; -extern u32 sbdn_sp5100; static void *smp_write_config_table(void *v) { @@ -59,7 +58,7 @@ static void *smp_write_config_table(void *v) apicid_sp5100 = CONFIG_MAX_CPUS + 1; apicid_sr5650 = apicid_sp5100 + 1; - dev = dev_find_slot(0, PCI_DEVFN(sbdn_sp5100 + 0x14, 0)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); if (dev) { /* Set SP5100 IOAPIC ID */ dword = pci_read_config32(dev, 0x74) & 0xfffffff0; diff --git a/src/mainboard/supermicro/h8scm/get_bus_conf.c b/src/mainboard/supermicro/h8scm/get_bus_conf.c index 28c4bf7924..46ed054a26 100644 --- a/src/mainboard/supermicro/h8scm/get_bus_conf.c +++ b/src/mainboard/supermicro/h8scm/get_bus_conf.c @@ -31,14 +31,12 @@ * and acpi_tables busnum is default. */ u8 bus_sp5100[2]; -u32 sbdn_sp5100; void get_bus_conf(void) { device_t dev; int i; - sbdn_sp5100 = 0; for (i = 0; i < 0; i++) { bus_sp5100[i] = 0; @@ -47,7 +45,7 @@ void get_bus_conf(void) bus_sp5100[0] = 0; /* sp5100 */ - dev = dev_find_slot(bus_sp5100[0], PCI_DEVFN(sbdn_sp5100 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sp5100[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); diff --git a/src/mainboard/supermicro/h8scm/irq_tables.c b/src/mainboard/supermicro/h8scm/irq_tables.c index 9770e6d848..8f727563a7 100644 --- a/src/mainboard/supermicro/h8scm/irq_tables.c +++ b/src/mainboard/supermicro/h8scm/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sp5100[2]; -extern unsigned long sbdn_sp5100; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sp5100[0]; - pirq->rtr_devfn = ((sbdn_sp5100 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -87,7 +85,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) slot_num = 0; /* pci bridge */ - write_pirq_info(pirq_info, bus_sp5100[0], ((sbdn_sp5100 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/supermicro/h8scm/mptable.c b/src/mainboard/supermicro/h8scm/mptable.c index 754ed549bf..3793212711 100644 --- a/src/mainboard/supermicro/h8scm/mptable.c +++ b/src/mainboard/supermicro/h8scm/mptable.c @@ -29,7 +29,6 @@ #include <cpu/amd/amdfam10_sysconf.h> extern u8 bus_sp5100[2]; -extern u32 sbdn_sp5100; static void *smp_write_config_table(void *v) { @@ -59,7 +58,7 @@ static void *smp_write_config_table(void *v) apicid_sp5100 = CONFIG_MAX_CPUS + 1; apicid_sr5650 = apicid_sp5100 + 1; - dev = dev_find_slot(0, PCI_DEVFN(sbdn_sp5100 + 0x14, 0)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); if (dev) { /* Set SP5100 IOAPIC ID */ dword = pci_read_config32(dev, 0x74) & 0xfffffff0; diff --git a/src/mainboard/tyan/s8226/get_bus_conf.c b/src/mainboard/tyan/s8226/get_bus_conf.c index 7a6876b880..087c04206a 100644 --- a/src/mainboard/tyan/s8226/get_bus_conf.c +++ b/src/mainboard/tyan/s8226/get_bus_conf.c @@ -30,7 +30,6 @@ * and acpi_tables busnum is default. */ u8 bus_sp5100[2]; -u32 sbdn_sp5100; void get_bus_conf(void); @@ -39,7 +38,6 @@ void get_bus_conf(void) device_t dev; int i; - sbdn_sp5100 = 0; for (i = 0; i < 0; i++) { bus_sp5100[i] = 0; @@ -48,7 +46,7 @@ void get_bus_conf(void) bus_sp5100[0] = 0; /* sp5100 */ - dev = dev_find_slot(bus_sp5100[0], PCI_DEVFN(sbdn_sp5100 + 0x14, 4)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); if (dev) { bus_sp5100[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); diff --git a/src/mainboard/tyan/s8226/irq_tables.c b/src/mainboard/tyan/s8226/irq_tables.c index 6b1e226007..0af225c9dd 100644 --- a/src/mainboard/tyan/s8226/irq_tables.c +++ b/src/mainboard/tyan/s8226/irq_tables.c @@ -44,8 +44,6 @@ static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, pirq_info->slot = slot; pirq_info->rfu = rfu; } -extern u8 bus_sp5100[2]; -extern unsigned long sbdn_sp5100; unsigned long write_pirq_routing_table(unsigned long addr) { @@ -71,8 +69,8 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_sp5100[0]; - pirq->rtr_devfn = ((sbdn_sp5100 + 0x14) << 3) | 4; + pirq->rtr_bus = 0; + pirq->rtr_devfn = PCI_DEVFN(0x14, 4); pirq->exclusive_irqs = 0; @@ -88,7 +86,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* pci bridge */ - write_pirq_info(pirq_info, bus_sp5100[0], ((sbdn_sp5100 + 0x14) << 3) | 4, + write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; diff --git a/src/mainboard/tyan/s8226/mptable.c b/src/mainboard/tyan/s8226/mptable.c index 6a12f2b821..3793212711 100644 --- a/src/mainboard/tyan/s8226/mptable.c +++ b/src/mainboard/tyan/s8226/mptable.c @@ -29,8 +29,6 @@ #include <cpu/amd/amdfam10_sysconf.h> extern u8 bus_sp5100[2]; -extern u32 sbdn_sr5650; -extern u32 sbdn_sp5100; static void *smp_write_config_table(void *v) { @@ -60,7 +58,7 @@ static void *smp_write_config_table(void *v) apicid_sp5100 = CONFIG_MAX_CPUS + 1; apicid_sr5650 = apicid_sp5100 + 1; - dev = dev_find_slot(0, PCI_DEVFN(sbdn_sp5100 + 0x14, 0)); + dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); if (dev) { /* Set SP5100 IOAPIC ID */ dword = pci_read_config32(dev, 0x74) & 0xfffffff0; |