summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorStefan Reinauer <stepan@openbios.org>2003-09-09 13:30:58 +0000
committerStefan Reinauer <stepan@openbios.org>2003-09-09 13:30:58 +0000
commit5282cd08756eb5084d5a86a7e18a87bc6801d5b7 (patch)
tree53c0630690707e1206eade7ac0151fd58f72a1c4 /src
parentdad60489d5dcce58ad6b99f5bc6becc1d4fc7660 (diff)
downloadcoreboot-5282cd08756eb5084d5a86a7e18a87bc6801d5b7.tar.xz
remove old config files, adopt to new config method. fix resource map (?)
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1107 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/amd/quartet/Config.lb359
-rw-r--r--src/mainboard/amd/quartet/auto.c4
-rw-r--r--src/mainboard/amd/quartet/chip.h5
-rw-r--r--src/mainboard/amd/quartet/irq_tables.c40
-rw-r--r--src/mainboard/amd/quartet/mainboard.c33
-rw-r--r--src/mainboard/amd/quartet/mptable.c58
-rw-r--r--src/mainboard/amd/quartet/resourcemap.c10
7 files changed, 376 insertions, 133 deletions
diff --git a/src/mainboard/amd/quartet/Config.lb b/src/mainboard/amd/quartet/Config.lb
index b6d65b4cb5..a358c25841 100644
--- a/src/mainboard/amd/quartet/Config.lb
+++ b/src/mainboard/amd/quartet/Config.lb
@@ -1,36 +1,180 @@
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
-#
-#
+uses MAINBOARD
+uses ARCH
+uses FALLBACK_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_STREAM_START
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+
###
-### Set all of the defaults for an x86 architecture
+### Build options
###
-#
-#
+
+##
+## Build code for the fallback boot
+##
+option HAVE_FALLBACK_BOOT=1
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+option HAVE_HARD_RESET=1
+
+##
+## Build code to export a programmable irq routing table
+##
+option HAVE_PIRQ_TABLE=1
+option IRQ_SLOT_COUNT=7
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+option HAVE_MP_TABLE=1
+
+##
+## Build code to export a CMOS option table
+##
+option HAVE_OPTION_TABLE=1
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+##
+option CONFIG_SMP=1
+option CONFIG_MAX_CPUS=4
+
+##
+## Build code to setup a generic IOAPIC
+##
+option CONFIG_IOAPIC=1
+
+##
+## Clean up the motherboard id strings
+##
+option MAINBOARD_PART_NUMBER="QUARTET"
+option MAINBOARD_VENDOR="AMD"
+
###
-### Build the objects we have code for in this directory.
+### LinuxBIOS layout values
###
-##object mainboard.o
+
+## ROM_SIZE is the size of boot ROM that this board will use.
+option ROM_SIZE = 524288
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+option ROM_IMAGE_SIZE = 65536
+
+##
+## Use a small 8K stack
+##
+option STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+option HEAP_SIZE=0x4000
+
+##
+## Only use the option table in a normal image
+##
+option USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+ option ROM_SECTION_SIZE = FALLBACK_SIZE
+ option ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+ option ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
+ option ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+option PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+option CONFIG_ROM_STREAM = 1
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+option _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+option XIP_ROM_SIZE=65536
+option XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+##
+## Set all of the defaults for an x86 architecture
+##
+
+arch i386 end
+#cpu k8 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+#object mainboard.o
driver mainboard.o
-object static_devices.o
+#object static_devices.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
-#
-arch i386 end
-#cpu k8 end
-#
-###
-### Build our 16 bit and 32 bit linuxBIOS entry code
-###
+object reset.o
+
+##
+## Romcc output
+##
+makerule ./failover.E
+ depends "$(MAINBOARD)/failover.c"
+ action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
+end
+
+makerule ./failover.inc
+ depends "./failover.E ./romcc"
+ action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"
+end
+
+makerule ./auto.E
+ depends "$(MAINBOARD)/auto.c"
+ action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
+end
+makerule ./auto.inc
+ depends "./auto.E ./romcc"
+ action "./romcc -mcpu=k8 -O ./auto.E > auto.inc"
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
mainboardinit cpu/i386/entry16.inc
mainboardinit cpu/i386/entry32.inc
ldscript /cpu/i386/entry16.lds
ldscript /cpu/i386/entry32.lds
-#
-###
-### Build our reset vector (This is where linuxBIOS is entered)
-###
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
if USE_FALLBACK_IMAGE
mainboardinit cpu/i386/reset16.inc
ldscript /cpu/i386/reset16.lds
@@ -38,81 +182,130 @@ else
mainboardinit cpu/i386/reset32.inc
ldscript /cpu/i386/reset32.lds
end
-#
-#### Should this be in the northbridge code?
+
+### Should this be in the northbridge code?
mainboardinit arch/i386/lib/cpu_reset.inc
-###
-### Setup the serial port
-###
-#mainboardinit superiowinbond/w83627hf/setup_serial.inc
-mainboardinit pc80/serial.inc
-mainboardinit arch/i386/lib/console.inc
-#
-###
-### Include an id string (For safe flashing)
-###
+
+##
+## Include an id string (For safe flashing)
+##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-#
-####
-#### This is the early phase of linuxBIOS startup
-#### Things are delicate and we test to see if we should
-#### failover to another image.
-####
-#option MAX_REBOOT_CNT=2
-if USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-#
-###
-### Setup our mtrrs
-###
+
+##
+## Setup our mtrrs
+##
mainboardinit cpu/k8/earlymtrr.inc
-#
-#
-####
-#### O.k. We aren't just an intermediary anymore!
-####
-#
+
###
-### When debugging disable the watchdog timer
+### This is the early phase of linuxBIOS startup
+### Things are delicate and we test to see if we should
+### failover to another image.
###
-##option MAXIMUM_CONSOLE_LOGLEVEL=7
-#default MAXIMUM_CONSOLE_LOGLEVEL=7
-#
-if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end
-#
+if USE_FALLBACK_IMAGE
+ ldscript /arch/i386/lib/failover.lds
+ mainboardinit ./failover.inc
+end
+
###
-### Romcc output
+### O.k. We aren't just an intermediary anymore!
###
-#makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E"
-#makerule ./failover.inc dep "./romcc ./failover.E" act "./romcc -O ./failover.E > failover.inc"
-#mainboardinit .failover.inc
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c"
- action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
+
+##
+## Setup RAM
+##
+mainboardinit cpu/k8/enable_mmx_sse.inc
+mainboardinit ./auto.inc
+mainboardinit cpu/k8/disable_mmx_sse.inc
+
+##
+## Include the secondary Configuration files
+##
+dir /pc80
+config chip.h
+
+northbridge amd/amdk8 "mc0"
+ pci 0:18.0
+ pci 0:18.0
+ pci 0:18.0
+ pci 0:18.1
+ pci 0:18.2
+ pci 0:18.3
+ southbridge amd/amd8131 "amd8131"
+ pci 0:0.0
+ pci 0:0.1
+ pci 0:1.0
+ pci 0:1.1
+ end
+ southbridge amd/amd8111 "amd8111"
+ pci 0:0.0
+ pci 0:1.0
+ pci 0:1.1
+ pci 0:1.2
+ pci 0:1.3
+ pci 0:1.5
+ pci 0:1.6
+ superio NSC/pc87360
+ pnp 1:2e.0
+ pnp 1:2e.1
+ pnp 1:2e.2
+ pnp 1:2e.3
+ pnp 1:2e.4
+ pnp 1:2e.5
+ pnp 1:2e.6
+ pnp 1:2e.7
+ pnp 1:2e.8
+ pnp 1:2e.9
+ pnp 1:2e.a
+ register "com1" = "{1, 0, 0x3f8, 4}"
+ register "lpt" = "{1}"
+ end
+ end
end
-makerule ./auto.inc
- depends "./romcc ./auto.E"
- action "./romcc -O ./auto.E > auto.inc"
+
+northbridge amd/amdk8 "mc1"
+ pci 0:19.0
+ pci 0:19.0
+ pci 0:19.0
+ pci 0:19.1
+ pci 0:19.2
+ pci 0:19.3
end
-mainboardinit ./auto.inc
-#
-###
-### Include the secondary Configuration files
-###
-northbridge amd/amdk8
+
+northbridge amd/amdk8 "mc2"
+ pci 0:1a.0
+ pci 0:1a.0
+ pci 0:1a.0
+ pci 0:1a.1
+ pci 0:1a.2
+ pci 0:1a.3
+end
+
+northbridge amd/amdk8 "mc3"
+ pci 0:1b.0
+ pci 0:1b.0
+ pci 0:1b.0
+ pci 0:1b.1
+ pci 0:1b.2
+ pci 0:1b.3
+end
+
+cpu k8 "cpu0"
+ register "up" = "{ .chip = &amd8131, .ht_width=16, .ht_speed=600 }"
end
-southbridge amd/amd8111
+
+cpu k8 "cpu1"
end
-#mainboardinit archi386/smp/secondary.inc
-superio NSC/pc87360
- register ".com1={1}, .com2={0}, .floppy=1, .lpt=1, .keyboard=1"
+
+cpu k8 "cpu2"
end
-dir /pc80
-##dir /src/superio/winbond/w83627hf
-cpu p5 end
-cpu p6 end
-cpu k7 end
-cpu k8 end
+
+cpu k8 "cpu3"
+end
+
+##
+## Include the old serial code for those few places that still need it.
+##
+mainboardinit pc80/serial.inc
+mainboardinit arch/i386/lib/console.inc
diff --git a/src/mainboard/amd/quartet/auto.c b/src/mainboard/amd/quartet/auto.c
index 3166f7ad3c..5632dfcfd3 100644
--- a/src/mainboard/amd/quartet/auto.c
+++ b/src/mainboard/amd/quartet/auto.c
@@ -25,6 +25,8 @@ static void memreset_setup(void)
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
/* Ensure the BIOS has control of the memory lines */
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
+ outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 30);
+ outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 31);
}
static void memreset(int controllers, const struct mem_controller *ctrl)
@@ -211,7 +213,7 @@ static void main(void)
enable_lapic();
init_timer();
if (!boot_cpu()) {
- notify_bsp_ap_is_stopped();
+// notify_bsp_ap_is_stopped();
stop_this_cpu();
}
pc87360_enable_serial();
diff --git a/src/mainboard/amd/quartet/chip.h b/src/mainboard/amd/quartet/chip.h
new file mode 100644
index 0000000000..191eb65e5c
--- /dev/null
+++ b/src/mainboard/amd/quartet/chip.h
@@ -0,0 +1,5 @@
+struct chip_control mainboard_amd_quartet_control;
+
+struct mainboard_amd_quartet_config {
+ int nothing;
+};
diff --git a/src/mainboard/amd/quartet/irq_tables.c b/src/mainboard/amd/quartet/irq_tables.c
index 286905c26f..5e4437ca11 100644
--- a/src/mainboard/amd/quartet/irq_tables.c
+++ b/src/mainboard/amd/quartet/irq_tables.c
@@ -7,25 +7,37 @@
#include <arch/pirq_routing.h>
+
const struct irq_routing_table intel_irq_routing_table = {
PIRQ_SIGNATURE, /* u32 signature */
PIRQ_VERSION, /* u16 version */
- 32+16*7, /* there can be total 7 devices on the bus */
- 0, /* Where the interrupt router lies (bus) */
- (5<<3)|3, /* Where the interrupt router lies (dev) */
- 0xc20, /* IRQs devoted exclusively to PCI usage */
+ 32+16*18, /* there can be total 18 devices on the bus */
+ 0, /* Where the interrupt router lies (bus) */
+ 0x23, /* Where the interrupt router lies (dev) */
+ 0, /* IRQs devoted exclusively to PCI usage */
0x1022, /* Vendor */
0x746b, /* Device */
- 0, /* Crap (miniport) */
+ 0, /* Crap (miniport) */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
- 0xdf, /* u8 checksum , mod 256 checksum must give zero */
- { /* bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
- {0x02, (5<<3)|0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}}, 0x02, 0x00},
- {0x02, (6<<3)|0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0xdeb8}}, 0x03, 0x00},
- {0x02, (7<<3)|0, {{0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}}, 0x04, 0x00},
- {0x02, (1<<3)|1, {{0x01, 0xdeb8}, {0x01, 0xdeb8}, {0x01, 0xdeb8}, {0x01, 0xdeb8}}, 0x00, 0x00},
- {0x00, (5<<3)|1, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}}, 0x00, 0x00},
- {0x00, (2<<3)|0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}}, 0x00, 0x00},
- {0xff, 0xff, {{0xff, 0xffff}, {0xff, 0xffff}, {0xff, 0xffff}, {0xff, 0xffff}}, 0xff, 0xff},
+ 0x35, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
+ {
+ {0,0xc0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {0,0x50, {{0x1, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {0x2,0x8, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x3, 0},
+ {0x2,0x10, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0},
+ {0x1,0x18, {{0x4, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0x0, 0},
+ {0x1,0x20, {{0x4, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0x0, 0},
+ {0x2,0x28, {{0x2, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0xa, 0},
+ {0,0x58, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {0x3,0x8, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x1, 0},
+ {0x3,0x10, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x2, 0},
+ {0x3,0x18, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x9, 0},
+ {0,0x30, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {0x1,0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0x4, 0xdef8}}, 0, 0},
+ {0x1,0x28, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x5, 0},
+ {0x1,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x6, 0},
+ {0x1,0x30, {{0x3, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0xb, 0},
+ {0,0x38, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+ {0,0xc8, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
}
};
diff --git a/src/mainboard/amd/quartet/mainboard.c b/src/mainboard/amd/quartet/mainboard.c
index 0622150d64..6c4d435ee1 100644
--- a/src/mainboard/amd/quartet/mainboard.c
+++ b/src/mainboard/amd/quartet/mainboard.c
@@ -1,11 +1,42 @@
+
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
+#include <arch/io.h>
+#include <device/chip.h>
+#include "../../../northbridge/amd/amdk8/northbridge.h"
+#include "chip.h"
+
unsigned long initial_apicid[CONFIG_MAX_CPUS] =
{
- 0, 1, 2, 3
+ 0, 1, 2, 3,
+};
+
+static struct device_operations mainboard_operations = {
+ .read_resources = root_dev_read_resources,
+ .set_resources = root_dev_set_resources,
+ .enable_resources = enable_childrens_resources,
+ .init = 0,
+ .scan_bus = amdk8_scan_root_bus,
+ .enable = 0,
+};
+
+static void enumerate(struct chip *chip)
+{
+ struct chip *child;
+ dev_root.ops = &mainboard_operations;
+ chip->dev = &dev_root;
+ chip->bus = 0;
+ for(child = chip->children; child; child = child->next) {
+ child->bus = &dev_root.link[0];
+ }
+}
+struct chip_control mainboard_amd_quartet_control = {
+ .enumerate = enumerate,
+ .name = "AMD Quartet mainboard ",
};
+
diff --git a/src/mainboard/amd/quartet/mptable.c b/src/mainboard/amd/quartet/mptable.c
index 847416eec5..94ac735744 100644
--- a/src/mainboard/amd/quartet/mptable.c
+++ b/src/mainboard/amd/quartet/mptable.c
@@ -7,8 +7,8 @@
void *smp_write_config_table(void *v, unsigned long * processor_map)
{
static const char sig[4] = "PCMP";
- static const char oem[8] = "AMD ";
- static const char productid[12] = "QUARTET ";
+ static const char oem[8] = "LNXI ";
+ static const char productid[12] = "HDAMA ";
struct mp_config_table *mc;
unsigned char bus_num;
unsigned char bus_isa;
@@ -36,40 +36,40 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
smp_write_processors(mc, processor_map);
{
- struct pci_dev *dev;
- uint32_t base;
+ device_t dev;
+
/* 8111 */
- dev = dev_find_slot(0, PCI_DEVFN(0x03,0));
+ dev = dev_find_slot(1, PCI_DEVFN(0x03,0));
if (dev) {
bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
bus_isa++;
}
else {
- printk_debug("ERROR - could not find PCI 0:03.0, using defaults\n");
+ printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n");
bus_8111_1 = 3;
bus_isa = 4;
}
/* 8131-1 */
- dev = dev_find_slot(0, PCI_DEVFN(0x01,0));
+ dev = dev_find_slot(1, PCI_DEVFN(0x01,0));
if (dev) {
bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
}
else {
- printk_debug("ERROR - could not find PCI 0:01.0, using defaults\n");
+ printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n");
bus_8131_1 = 1;
}
/* 8131-2 */
- dev = dev_find_slot(0, PCI_DEVFN(0x02,0));
+ dev = dev_find_slot(1, PCI_DEVFN(0x02,0));
if (dev) {
bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
}
else {
- printk_debug("ERROR - could not find PCI 0:02.0, using defaults\n");
+ printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n");
bus_8131_2 = 2;
}
@@ -85,17 +85,17 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
smp_write_ioapic(mc, 2, 0x11, 0xfec00000);
{
- struct pci_dev *dev;
+ device_t dev;
uint32_t base;
/* 8131 apic 3 */
- dev = dev_find_slot(0, PCI_DEVFN(0x01,1));
+ dev = dev_find_slot(1, PCI_DEVFN(0x01,1));
if (dev) {
base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
base &= PCI_BASE_ADDRESS_MEM_MASK;
smp_write_ioapic(mc, 0x03, 0x11, base);
}
/* 8131 apic 4 */
- dev = dev_find_slot(0, PCI_DEVFN(0x02,1));
+ dev = dev_find_slot(1, PCI_DEVFN(0x02,1));
if (dev) {
base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
base &= PCI_BASE_ADDRESS_MEM_MASK;
@@ -150,43 +150,43 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
/* PCI Slot 1 */
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (1<<2)|0, 0x04, 0x1);
+ bus_8131_2, (1<<2)|0, 0x02, 0x11);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (1<<2)|1, 0x04, 0x2);
+ bus_8131_2, (1<<2)|1, 0x02, 0x12);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (1<<2)|2, 0x04, 0x3);
+ bus_8131_2, (1<<2)|2, 0x02, 0x13);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (1<<2)|3, 0x04, 0x0);
+ bus_8131_2, (1<<2)|3, 0x02, 0x10);
/* PCI Slot 2 */
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (2<<2)|0, 0x04, 0x2);
+ bus_8131_2, (2<<2)|0, 0x02, 0x12);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (2<<2)|1, 0x04, 0x3);
+ bus_8131_2, (2<<2)|1, 0x02, 0x13);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (2<<2)|2, 0x04, 0x0);
+ bus_8131_2, (2<<2)|2, 0x02, 0x10);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_2, (2<<2)|3, 0x04, 0x1);
+ bus_8131_2, (2<<2)|3, 0x02, 0x11);
/* PCI Slot 3 */
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (1<<2)|0, 0x03, 0x1);
+ bus_8131_1, (1<<2)|0, 0x02, 0x11);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (1<<2)|1, 0x03, 0x2);
+ bus_8131_1, (1<<2)|1, 0x02, 0x12);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (1<<2)|2, 0x03, 0x3);
+ bus_8131_1, (1<<2)|2, 0x02, 0x13);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (1<<2)|3, 0x03, 0x0);
+ bus_8131_1, (1<<2)|3, 0x02, 0x10);
/* PCI Slot 4 */
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (2<<2)|0, 0x03, 0x2);
+ bus_8131_1, (2<<2)|0, 0x02, 0x12);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (2<<2)|1, 0x03, 0x3);
+ bus_8131_1, (2<<2)|1, 0x02, 0x13);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (2<<2)|2, 0x03, 0x0);
+ bus_8131_1, (2<<2)|2, 0x02, 0x10);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_8131_1, (2<<2)|3, 0x03, 0x1);
+ bus_8131_1, (2<<2)|3, 0x02, 0x11);
/* PCI Slot 5 */
#warning "FIXME get the irqs right, it's just hacked to work for now"
diff --git a/src/mainboard/amd/quartet/resourcemap.c b/src/mainboard/amd/quartet/resourcemap.c
index bf1e388238..f34e6f5327 100644
--- a/src/mainboard/amd/quartet/resourcemap.c
+++ b/src/mainboard/amd/quartet/resourcemap.c
@@ -34,10 +34,10 @@ static void setup_quartet_resource_map(void)
* This field defines the upper address bits of a 40 bit address
* that define the end of the DRAM region.
*/
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00f00000,
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x01f00001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x02f00002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x03f00003,
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x000f0000,
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x001f0001,
+ PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x002f0002,
+ PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x003f0003,
PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
@@ -256,7 +256,7 @@ static void setup_quartet_resource_map(void)
PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000203,
PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0xff080113,
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0xffff0040,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0xffff0330,
+ PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0xffff0270,
};
int max;
max = sizeof(register_values)/sizeof(register_values[0]);