diff options
| author | Furquan Shaikh <furquan@chromium.org> | 2017-10-06 14:06:27 -0700 |
|---|---|---|
| committer | Furquan Shaikh <furquan@google.com> | 2017-10-08 19:38:51 +0000 |
| commit | ef1a5ede6ca61e66ff39a694055378b2dca8fb96 (patch) | |
| tree | 0f55c17bff75bd9047a0d4452b3f1d12d15827bd /src | |
| parent | 2749c52080bbaba9e6ce54fb327b7157a7e392c2 (diff) | |
| download | coreboot-ef1a5ede6ca61e66ff39a694055378b2dca8fb96.tar.xz | |
mb/google/poppy/variants/soraka: Add 10ms reset delay for WCOM device
Change 868b3761 (mainboard/google/soraka: Reduce Wacom resume time)
removed the delay after taking device out of reset since it seemed
unnecessary in system resume case (because there is enough time after
taking device out of reset and before communication with device
starts).
However, without the delay, kernel driver runs into issue while
talking to the device during boot-up and runtime
suspend/resume. (Observed this error in dmesg: "i2c_hid
i2c-WCOMCOHO:00: failed to change power setting."). Thus, add 10ms
delay after taking device out of reset. Verified on multiple Soraka
system that with 10ms delay, kernel driver does not run into any issue
talking to the WCOM device during boot-up, runtime suspend/resume and
system suspend/resume.
BUG=b:65358919
TEST=No more errors talking to WCOM device in kernel dmesg.
Change-Id: I485b753cbae4b653e74337e048aea4d26ffdbb81
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/21910
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Rajat Jain <rajatja@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src')
| -rw-r--r-- | src/mainboard/google/poppy/variants/soraka/devicetree.cb | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/src/mainboard/google/poppy/variants/soraka/devicetree.cb b/src/mainboard/google/poppy/variants/soraka/devicetree.cb index f6948d953b..1c342a4e43 100644 --- a/src/mainboard/google/poppy/variants/soraka/devicetree.cb +++ b/src/mainboard/google/poppy/variants/soraka/devicetree.cb @@ -281,6 +281,7 @@ chip soc/intel/skylake register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" register "generic.probed" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E3)" + register "generic.reset_delay_ms" = "10" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C22)" register "generic.enable_delay_ms" = "1" register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E11)" |