diff options
| author | Stefan Reinauer <stepan@coresystems.de> | 2010-02-27 01:50:21 +0000 |
|---|---|---|
| committer | Stefan Reinauer <stepan@openbios.org> | 2010-02-27 01:50:21 +0000 |
| commit | 138be8315b63b0c8955159580d085e7621882b95 (patch) | |
| tree | aabbcab390ea1e522524ff7e98d11ac752a051b5 /src | |
| parent | be07eb29bc087a97903f72c2253442c285ce5942 (diff) | |
| download | coreboot-138be8315b63b0c8955159580d085e7621882b95.tar.xz | |
This does the following:
cd coreboot/src/southbridge
svn mv i82801ca i82801cx
svn mv i82801dbm i82801dx
svn mv i82801er i82801ex
svn copy i82801xx i82801bx
svn mv i82801xx i82801ax
Plus, fixing up the filenames in these directories and the romstage.c and
Kconfig files of the mainboards using those drivers.
Plus, switching the thomson ip1000 and rca rm4100 to the i82801dx driver.
There's a lot more to be done, like
- adding device IDs for the ICH3 and newer drivers that have been kept in
i82801xx so far
- drop the additional parts support from the ax and bx drivers.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5167 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
154 files changed, 2484 insertions, 405 deletions
diff --git a/src/mainboard/asus/mew-am/Kconfig b/src/mainboard/asus/mew-am/Kconfig index 7f16c5b6be..37317815ea 100644 --- a/src/mainboard/asus/mew-am/Kconfig +++ b/src/mainboard/asus/mew-am/Kconfig @@ -23,7 +23,7 @@ config BOARD_ASUS_MEW_AM select ARCH_X86 select CPU_INTEL_SOCKET_PGA370 select NORTHBRIDGE_INTEL_I82810 - select SOUTHBRIDGE_INTEL_I82801XX + select SOUTHBRIDGE_INTEL_I82801AX select SUPERIO_SMSC_SMSCSUPERIO select ROMCC select HAVE_PIRQ_TABLE diff --git a/src/mainboard/asus/mew-am/devicetree.cb b/src/mainboard/asus/mew-am/devicetree.cb index 2ca0e68cda..016f6dbc51 100644 --- a/src/mainboard/asus/mew-am/devicetree.cb +++ b/src/mainboard/asus/mew-am/devicetree.cb @@ -7,7 +7,7 @@ chip northbridge/intel/i82810 # Northbridge device pci_domain 0 on # PCI domain device pci 0.0 on end # Graphics Memory Controller Hub (GMCH) device pci 1.0 on end # Chipset Graphics Controller (CGC) - chip southbridge/intel/i82801xx # Southbridge + chip southbridge/intel/i82801ax # Southbridge register "ide0_enable" = "1" register "ide1_enable" = "1" diff --git a/src/mainboard/asus/mew-am/romstage.c b/src/mainboard/asus/mew-am/romstage.c index a7f74c42f4..8751e0ec28 100644 --- a/src/mainboard/asus/mew-am/romstage.c +++ b/src/mainboard/asus/mew-am/romstage.c @@ -31,7 +31,7 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "lib/ramtest.c" -#include "southbridge/intel/i82801xx/i82801xx_early_smbus.c" +#include "southbridge/intel/i82801ax/i82801ax_early_smbus.c" #include "northbridge/intel/i82810/raminit.h" #include "lib/debug.c" #include "pc80/udelay_io.c" diff --git a/src/mainboard/asus/mew-vm/Kconfig b/src/mainboard/asus/mew-vm/Kconfig index 616fb4bdde..f5cefd0df8 100644 --- a/src/mainboard/asus/mew-vm/Kconfig +++ b/src/mainboard/asus/mew-vm/Kconfig @@ -23,7 +23,7 @@ config BOARD_ASUS_MEW_VM select ARCH_X86 select CPU_INTEL_SOCKET_PGA370 select NORTHBRIDGE_INTEL_I82810 - select SOUTHBRIDGE_INTEL_I82801XX + select SOUTHBRIDGE_INTEL_I82801AX select SUPERIO_SMSC_LPC47B272 select ROMCC select HAVE_PIRQ_TABLE diff --git a/src/mainboard/asus/mew-vm/devicetree.cb b/src/mainboard/asus/mew-vm/devicetree.cb index 0dc4b6f468..a5415a2bfe 100644 --- a/src/mainboard/asus/mew-vm/devicetree.cb +++ b/src/mainboard/asus/mew-vm/devicetree.cb @@ -4,7 +4,7 @@ chip northbridge/intel/i82810 device pci 1.0 on # Onboard Video # device pci 1.0 on end end - chip southbridge/intel/i82801xx # Southbridge + chip southbridge/intel/i82801ax # Southbridge register "ide0_enable" = "1" register "ide1_enable" = "1" diff --git a/src/mainboard/asus/mew-vm/romstage.c b/src/mainboard/asus/mew-vm/romstage.c index d9473a5880..703cd87de5 100644 --- a/src/mainboard/asus/mew-vm/romstage.c +++ b/src/mainboard/asus/mew-vm/romstage.c @@ -38,7 +38,7 @@ #define SERIAL_DEV PNP_DEV(0x2e, LPC47B272_SP1) -#include "southbridge/intel/i82801xx/i82801xx_early_smbus.c" +#include "southbridge/intel/i82801ax/i82801ax_early_smbus.c" #include "lib/debug.c" #include "pc80/udelay_io.c" #include "lib/delay.c" diff --git a/src/mainboard/dell/s1850/Kconfig b/src/mainboard/dell/s1850/Kconfig index 3f14662be4..aeb14a008a 100644 --- a/src/mainboard/dell/s1850/Kconfig +++ b/src/mainboard/dell/s1850/Kconfig @@ -3,7 +3,7 @@ config BOARD_DELL_S1850 select ARCH_X86 select CPU_INTEL_SOCKET_MPGA604 select NORTHBRIDGE_INTEL_E7520 - select SOUTHBRIDGE_INTEL_I82801ER + select SOUTHBRIDGE_INTEL_I82801EX select SOUTHBRIDGE_INTEL_PXHD select SUPERIO_NSC_PC8374 select ROMCC diff --git a/src/mainboard/dell/s1850/devicetree.cb b/src/mainboard/dell/s1850/devicetree.cb index 4e93a3aefb..ab95e54a7b 100644 --- a/src/mainboard/dell/s1850/devicetree.cb +++ b/src/mainboard/dell/s1850/devicetree.cb @@ -1,6 +1,6 @@ chip northbridge/intel/e7520 # mch device pci_domain 0 on - chip southbridge/intel/i82801er # i82801er + chip southbridge/intel/i82801ex # i82801er # USB ports device pci 1d.0 on end device pci 1d.1 on end diff --git a/src/mainboard/dell/s1850/romstage.c b/src/mainboard/dell/s1850/romstage.c index 5f62ce80a8..952c37c1cf 100644 --- a/src/mainboard/dell/s1850/romstage.c +++ b/src/mainboard/dell/s1850/romstage.c @@ -12,7 +12,7 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "lib/ramtest.c" -#include "southbridge/intel/i82801er/i82801er_early_smbus.c" +#include "southbridge/intel/i82801ex/i82801ex_early_smbus.c" #include "northbridge/intel/e7520/raminit.h" #include "superio/nsc/pc8374/pc8374_early_init.c" #include "cpu/x86/lapic/boot_cpu.c" diff --git a/src/mainboard/digitallogic/adl855pc/Kconfig b/src/mainboard/digitallogic/adl855pc/Kconfig index fd109e9d64..58b9f6f034 100644 --- a/src/mainboard/digitallogic/adl855pc/Kconfig +++ b/src/mainboard/digitallogic/adl855pc/Kconfig @@ -3,7 +3,7 @@ config BOARD_DIGITALLOGIC_ADL855PC select ARCH_X86 select CPU_INTEL_SOCKET_MPGA479M select NORTHBRIDGE_INTEL_I855 - select SOUTHBRIDGE_INTEL_I82801DBM + select SOUTHBRIDGE_INTEL_I82801DX select SUPERIO_WINBOND_W83627HF select ROMCC select HAVE_PIRQ_TABLE diff --git a/src/mainboard/digitallogic/adl855pc/devicetree.cb b/src/mainboard/digitallogic/adl855pc/devicetree.cb index 0f600ac8f1..6846b4e59c 100644 --- a/src/mainboard/digitallogic/adl855pc/devicetree.cb +++ b/src/mainboard/digitallogic/adl855pc/devicetree.cb @@ -2,7 +2,7 @@ chip northbridge/intel/i855 device pci_domain 0 on device pci 0.0 on end device pci 1.0 on end - chip southbridge/intel/i82801dbm + chip southbridge/intel/i82801dx # pci 11.0 on end # pci 11.1 on end # pci 11.2 on end diff --git a/src/mainboard/digitallogic/adl855pc/romstage.c b/src/mainboard/digitallogic/adl855pc/romstage.c index 16d9195d38..8903876057 100644 --- a/src/mainboard/digitallogic/adl855pc/romstage.c +++ b/src/mainboard/digitallogic/adl855pc/romstage.c @@ -16,7 +16,8 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "lib/ramtest.c" -#include "southbridge/intel/i82801dbm/i82801dbm_early_smbus.c" +#include "southbridge/intel/i82801dx/i82801dx.h" +#include "southbridge/intel/i82801dx/i82801dx_early_smbus.c" #include "northbridge/intel/i855/raminit.h" #if 0 diff --git a/src/mainboard/hp/e_vectra_p2706t/Kconfig b/src/mainboard/hp/e_vectra_p2706t/Kconfig index 676d3eb5d8..755b3ac904 100644 --- a/src/mainboard/hp/e_vectra_p2706t/Kconfig +++ b/src/mainboard/hp/e_vectra_p2706t/Kconfig @@ -26,7 +26,7 @@ config BOARD_HP_E_VECTRA_P2706T select ARCH_X86 select CPU_INTEL_SOCKET_PGA370 select NORTHBRIDGE_INTEL_I82810 - select SOUTHBRIDGE_INTEL_I82801XX + select SOUTHBRIDGE_INTEL_I82801AX select SUPERIO_NSC_PC87360 select ROMCC select HAVE_PIRQ_TABLE diff --git a/src/mainboard/hp/e_vectra_p2706t/devicetree.cb b/src/mainboard/hp/e_vectra_p2706t/devicetree.cb index 82209d4317..7ea1f299e7 100644 --- a/src/mainboard/hp/e_vectra_p2706t/devicetree.cb +++ b/src/mainboard/hp/e_vectra_p2706t/devicetree.cb @@ -8,7 +8,7 @@ chip northbridge/intel/i82810 # Northbridge device pci_domain 0 on device pci 0.0 on end # Host bridge device pci 1.0 on end # Onboard VGA - chip southbridge/intel/i82801xx # Southbridge + chip southbridge/intel/i82801ax # Southbridge register "ide0_enable" = "1" register "ide1_enable" = "1" diff --git a/src/mainboard/hp/e_vectra_p2706t/romstage.c b/src/mainboard/hp/e_vectra_p2706t/romstage.c index 50d8c447b4..f2c643c854 100644 --- a/src/mainboard/hp/e_vectra_p2706t/romstage.c +++ b/src/mainboard/hp/e_vectra_p2706t/romstage.c @@ -37,7 +37,7 @@ #include "northbridge/intel/i82810/raminit.h" #include "cpu/x86/mtrr/earlymtrr.c" #include "cpu/x86/bist.h" -#include "southbridge/intel/i82801xx/i82801xx_early_smbus.c" +#include "southbridge/intel/i82801ax/i82801ax_early_smbus.c" #include "pc80/udelay_io.c" #include "lib/debug.c" #include "northbridge/intel/i82810/raminit.c" diff --git a/src/mainboard/intel/jarrell/Kconfig b/src/mainboard/intel/jarrell/Kconfig index 7a17ea7782..fc70befafa 100644 --- a/src/mainboard/intel/jarrell/Kconfig +++ b/src/mainboard/intel/jarrell/Kconfig @@ -4,7 +4,7 @@ config BOARD_INTEL_JARRELL select CPU_INTEL_SOCKET_MPGA604 select NORTHBRIDGE_INTEL_E7520 select SOUTHBRIDGE_INTEL_PXHD - select SOUTHBRIDGE_INTEL_I82801ER + select SOUTHBRIDGE_INTEL_I82801EX select SUPERIO_NSC_PC87427 select ROMCC select HAVE_PIRQ_TABLE diff --git a/src/mainboard/intel/jarrell/devicetree.cb b/src/mainboard/intel/jarrell/devicetree.cb index e4cdbdeacb..32f70e3e85 100644 --- a/src/mainboard/intel/jarrell/devicetree.cb +++ b/src/mainboard/intel/jarrell/devicetree.cb @@ -17,7 +17,7 @@ chip northbridge/intel/e7520 end end device pci 06.0 on end - chip southbridge/intel/i82801er # i82801er + chip southbridge/intel/i82801ex # i82801er device pci 1d.0 on end device pci 1d.1 on end device pci 1d.2 on end diff --git a/src/mainboard/intel/jarrell/romstage.c b/src/mainboard/intel/jarrell/romstage.c index 462bd8e25d..d7b1bf40c7 100644 --- a/src/mainboard/intel/jarrell/romstage.c +++ b/src/mainboard/intel/jarrell/romstage.c @@ -12,7 +12,7 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "lib/ramtest.c" -#include "southbridge/intel/i82801er/i82801er_early_smbus.c" +#include "southbridge/intel/i82801ex/i82801ex_early_smbus.c" #include "northbridge/intel/e7520/raminit.h" #include "superio/nsc/pc87427/pc87427.h" #include "cpu/x86/lapic/boot_cpu.c" diff --git a/src/mainboard/intel/xe7501devkit/Kconfig b/src/mainboard/intel/xe7501devkit/Kconfig index 72c1d94fb2..d2a9f4779f 100644 --- a/src/mainboard/intel/xe7501devkit/Kconfig +++ b/src/mainboard/intel/xe7501devkit/Kconfig @@ -4,7 +4,7 @@ config BOARD_INTEL_XE7501DEVKIT select CPU_INTEL_SOCKET_MPGA604 select NORTHBRIDGE_INTEL_E7501 select SOUTHBRIDGE_INTEL_I82870 - select SOUTHBRIDGE_INTEL_I82801CA + select SOUTHBRIDGE_INTEL_I82801CX select SUPERIO_SMSC_LPC47B272 select ROMCC select HAVE_PIRQ_TABLE diff --git a/src/mainboard/intel/xe7501devkit/devicetree.cb b/src/mainboard/intel/xe7501devkit/devicetree.cb index 00ed4eca84..efa0d88216 100644 --- a/src/mainboard/intel/xe7501devkit/devicetree.cb +++ b/src/mainboard/intel/xe7501devkit/devicetree.cb @@ -20,7 +20,7 @@ chip northbridge/intel/e7501 end end device pci 6.0 on end # E7501 Power management registers? (undocumented) - chip southbridge/intel/i82801ca + chip southbridge/intel/i82801cx device pci 1d.0 off end # USB (might not work, Southbridge code needs looking at) device pci 1d.1 off end # USB (not populated) device pci 1d.2 off end # USB (not populated) diff --git a/src/mainboard/intel/xe7501devkit/failover.c b/src/mainboard/intel/xe7501devkit/failover.c index 7aa9e405ed..9daf3b27d6 100644 --- a/src/mainboard/intel/xe7501devkit/failover.c +++ b/src/mainboard/intel/xe7501devkit/failover.c @@ -7,7 +7,7 @@ #include <arch/romcc_io.h> #include <cpu/x86/lapic.h> #include "pc80/mc146818rtc_early.c" -#include "southbridge/intel/i82801ca/cmos_failover.c" +#include "southbridge/intel/i82801cx/cmos_failover.c" #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/intel/e7501/reset_test.c" diff --git a/src/mainboard/intel/xe7501devkit/reset.c b/src/mainboard/intel/xe7501devkit/reset.c index 8feaac64e5..7c8a729f5e 100644 --- a/src/mainboard/intel/xe7501devkit/reset.c +++ b/src/mainboard/intel/xe7501devkit/reset.c @@ -1,6 +1,6 @@ -void i82801ca_hard_reset(void); +void i82801cx_hard_reset(void); void hard_reset(void) { - i82801ca_hard_reset(); + i82801cx_hard_reset(); } diff --git a/src/mainboard/intel/xe7501devkit/romstage.c b/src/mainboard/intel/xe7501devkit/romstage.c index 7269fa8d43..0bedaf9431 100644 --- a/src/mainboard/intel/xe7501devkit/romstage.c +++ b/src/mainboard/intel/xe7501devkit/romstage.c @@ -14,7 +14,7 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "lib/ramtest.c" -#include "southbridge/intel/i82801ca/i82801ca_early_smbus.c" +#include "southbridge/intel/i82801cx/i82801cx_early_smbus.c" #include "northbridge/intel/e7501/raminit.h" #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/intel/e7501/debug.c" diff --git a/src/mainboard/mitac/6513wu/Kconfig b/src/mainboard/mitac/6513wu/Kconfig index 20559b24b0..64937ce1c5 100644 --- a/src/mainboard/mitac/6513wu/Kconfig +++ b/src/mainboard/mitac/6513wu/Kconfig @@ -23,7 +23,7 @@ config BOARD_MITAC_6513WU select ARCH_X86 select CPU_INTEL_SOCKET_PGA370 select NORTHBRIDGE_INTEL_I82810 - select SOUTHBRIDGE_INTEL_I82801XX + select SOUTHBRIDGE_INTEL_I82801AX select SUPERIO_SMSC_SMSCSUPERIO select ROMCC select HAVE_PIRQ_TABLE diff --git a/src/mainboard/mitac/6513wu/devicetree.cb b/src/mainboard/mitac/6513wu/devicetree.cb index 0369775c07..3cba778e10 100644 --- a/src/mainboard/mitac/6513wu/devicetree.cb +++ b/src/mainboard/mitac/6513wu/devicetree.cb @@ -27,7 +27,7 @@ chip northbridge/intel/i82810 # Northbridge device pci_domain 0 on # PCI domain device pci 0.0 on end # Graphics Memory Controller Hub (GMCH) device pci 1.0 on end - chip southbridge/intel/i82801xx # Southbridge + chip southbridge/intel/i82801ax # Southbridge register "pirqa_routing" = "0x03" register "pirqb_routing" = "0x05" register "pirqc_routing" = "0x09" diff --git a/src/mainboard/mitac/6513wu/romstage.c b/src/mainboard/mitac/6513wu/romstage.c index 6222ea8721..daa2e9660c 100644 --- a/src/mainboard/mitac/6513wu/romstage.c +++ b/src/mainboard/mitac/6513wu/romstage.c @@ -31,7 +31,7 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "lib/ramtest.c" -#include "southbridge/intel/i82801xx/i82801xx_early_smbus.c" +#include "southbridge/intel/i82801ax/i82801ax_early_smbus.c" #include "northbridge/intel/i82810/raminit.h" #include "lib/debug.c" #include "pc80/udelay_io.c" diff --git a/src/mainboard/msi/ms6178/Kconfig b/src/mainboard/msi/ms6178/Kconfig index 16662da312..a6af3260d0 100644 --- a/src/mainboard/msi/ms6178/Kconfig +++ b/src/mainboard/msi/ms6178/Kconfig @@ -23,7 +23,7 @@ config BOARD_MSI_MS_6178 select ARCH_X86 select CPU_INTEL_SOCKET_PGA370 select NORTHBRIDGE_INTEL_I82810 - select SOUTHBRIDGE_INTEL_I82801XX + select SOUTHBRIDGE_INTEL_I82801AX select SUPERIO_WINBOND_W83627HF select ROMCC select HAVE_PIRQ_TABLE diff --git a/src/mainboard/msi/ms6178/devicetree.cb b/src/mainboard/msi/ms6178/devicetree.cb index baa0e040b8..4863957714 100644 --- a/src/mainboard/msi/ms6178/devicetree.cb +++ b/src/mainboard/msi/ms6178/devicetree.cb @@ -27,7 +27,7 @@ chip northbridge/intel/i82810 # Northbridge device pci_domain 0 on device pci 0.0 on end # Host bridge device pci 1.0 on end # Onboard VGA - chip southbridge/intel/i82801xx # Southbridge + chip southbridge/intel/i82801ax # Southbridge register "ide0_enable" = "1" register "ide1_enable" = "1" diff --git a/src/mainboard/msi/ms6178/romstage.c b/src/mainboard/msi/ms6178/romstage.c index a320dde763..976d24a56c 100644 --- a/src/mainboard/msi/ms6178/romstage.c +++ b/src/mainboard/msi/ms6178/romstage.c @@ -35,7 +35,7 @@ #include "northbridge/intel/i82810/raminit.h" #include "cpu/x86/mtrr/earlymtrr.c" #include "cpu/x86/bist.h" -#include "southbridge/intel/i82801xx/i82801xx_early_smbus.c" +#include "southbridge/intel/i82801ax/i82801ax_early_smbus.c" #include "pc80/udelay_io.c" #include "lib/debug.c" #include "northbridge/intel/i82810/raminit.c" diff --git a/src/mainboard/nec/powermate2000/Kconfig b/src/mainboard/nec/powermate2000/Kconfig index fa3532d028..7b818b45e1 100644 --- a/src/mainboard/nec/powermate2000/Kconfig +++ b/src/mainboard/nec/powermate2000/Kconfig @@ -23,7 +23,7 @@ config BOARD_NEC_POWERMATE_2000 select ARCH_X86 select CPU_INTEL_SOCKET_PGA370 select NORTHBRIDGE_INTEL_I82810 - select SOUTHBRIDGE_INTEL_I82801XX + select SOUTHBRIDGE_INTEL_I82801AX select SUPERIO_SMSC_SMSCSUPERIO select ROMCC select HAVE_PIRQ_TABLE diff --git a/src/mainboard/nec/powermate2000/devicetree.cb b/src/mainboard/nec/powermate2000/devicetree.cb index 0cb7e328b5..52cae5823c 100644 --- a/src/mainboard/nec/powermate2000/devicetree.cb +++ b/src/mainboard/nec/powermate2000/devicetree.cb @@ -7,7 +7,7 @@ chip northbridge/intel/i82810 # Northbridge device pci_domain 0 on device pci 0.0 on end # Host bridge device pci 1.0 off end # Onboard video - chip southbridge/intel/i82801xx # Southbridge + chip southbridge/intel/i82801ax # Southbridge register "ide0_enable" = "1" register "ide1_enable" = "1" diff --git a/src/mainboard/nec/powermate2000/romstage.c b/src/mainboard/nec/powermate2000/romstage.c index 701e312967..c923f9943a 100644 --- a/src/mainboard/nec/powermate2000/romstage.c +++ b/src/mainboard/nec/powermate2000/romstage.c @@ -35,7 +35,7 @@ #include "northbridge/intel/i82810/raminit.h" #include "cpu/x86/mtrr/earlymtrr.c" #include "cpu/x86/bist.h" -#include "southbridge/intel/i82801xx/i82801xx_early_smbus.c" +#include "southbridge/intel/i82801ax/i82801ax_early_smbus.c" #include "pc80/udelay_io.c" #include "northbridge/intel/i82810/raminit.c" diff --git a/src/mainboard/rca/rm4100/Kconfig b/src/mainboard/rca/rm4100/Kconfig index 1be2a752dc..cdca002ea3 100644 --- a/src/mainboard/rca/rm4100/Kconfig +++ b/src/mainboard/rca/rm4100/Kconfig @@ -3,7 +3,7 @@ config BOARD_RCA_RM4100 select ARCH_X86 select CPU_INTEL_SOCKET_PGA370 select NORTHBRIDGE_INTEL_I82830 - select SOUTHBRIDGE_INTEL_I82801XX + select SOUTHBRIDGE_INTEL_I82801DX select SUPERIO_SMSC_SMSCSUPERIO select ROMCC select HAVE_PIRQ_TABLE diff --git a/src/mainboard/rca/rm4100/devicetree.cb b/src/mainboard/rca/rm4100/devicetree.cb index 1844932114..2b04ad7d3a 100644 --- a/src/mainboard/rca/rm4100/devicetree.cb +++ b/src/mainboard/rca/rm4100/devicetree.cb @@ -2,7 +2,7 @@ chip northbridge/intel/i82830 # Northbridge device pci_domain 0 on # PCI domain device pci 0.0 on end # Host bridge device pci 2.0 on end # VGA (Intel 82830 CGC) - chip southbridge/intel/i82801xx # Southbridge + chip southbridge/intel/i82801dx # Southbridge register "pirqa_routing" = "0x05" register "pirqb_routing" = "0x06" register "pirqc_routing" = "0x07" diff --git a/src/mainboard/rca/rm4100/gpio.c b/src/mainboard/rca/rm4100/gpio.c index d51bc90e78..a27b7bb327 100644 --- a/src/mainboard/rca/rm4100/gpio.c +++ b/src/mainboard/rca/rm4100/gpio.c @@ -34,8 +34,8 @@ static void mb_gpio_init(void) dev = PCI_DEV(0x0, 0x1f, 0x0); /* Set the value for GPIO base address register and enable GPIO. */ - pci_write_config32(dev, GPIO_BASE_ICH0_5, (ICH_IO_BASE_ADDR | 1)); - pci_write_config8(dev, GPIO_CNTL_ICH0_5, 0x10); + pci_write_config32(dev, GPIO_BASE, (ICH_IO_BASE_ADDR | 1)); + pci_write_config8(dev, GPIO_CNTL, 0x10); /* Set GPIO23 to high, this enables the LAN controller. */ udelay(10); diff --git a/src/mainboard/rca/rm4100/romstage.c b/src/mainboard/rca/rm4100/romstage.c index 2f3892e3a0..cf7464442d 100644 --- a/src/mainboard/rca/rm4100/romstage.c +++ b/src/mainboard/rca/rm4100/romstage.c @@ -35,8 +35,8 @@ #include "superio/smsc/smscsuperio/smscsuperio_early_serial.c" #include "northbridge/intel/i82830/raminit.h" #include "northbridge/intel/i82830/memory_initialized.c" -#include "southbridge/intel/i82801xx/i82801xx.h" -#include "southbridge/intel/i82801xx/i82801xx_reset.c" +#include "southbridge/intel/i82801dx/i82801dx.h" +#include "southbridge/intel/i82801dx/i82801dx_reset.c" #include "cpu/x86/mtrr/earlymtrr.c" #include "cpu/x86/bist.h" #include "spd_table.h" @@ -44,7 +44,7 @@ #define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1) -#include "southbridge/intel/i82801xx/i82801xx_early_smbus.c" +#include "southbridge/intel/i82801dx/i82801dx_early_smbus.c" /** * The onboard 64MB PC133 memory does not have a SPD EEPROM so the @@ -127,4 +127,4 @@ static void main(unsigned long bist) /* Check RAM. */ /* ram_check(0, 640 * 1024); */ /* ram_check(64512 * 1024, 65536 * 1024); */ -}
\ No newline at end of file +} diff --git a/src/mainboard/supermicro/x6dhe_g2/Kconfig b/src/mainboard/supermicro/x6dhe_g2/Kconfig index eb3330c023..a456abea8a 100644 --- a/src/mainboard/supermicro/x6dhe_g2/Kconfig +++ b/src/mainboard/supermicro/x6dhe_g2/Kconfig @@ -3,7 +3,7 @@ config BOARD_SUPERMICRO_X6DHE_G2 select ARCH_X86 select CPU_INTEL_SOCKET_MPGA604 select NORTHBRIDGE_INTEL_E7520 - select SOUTHBRIDGE_INTEL_I82801ER + select SOUTHBRIDGE_INTEL_I82801EX select SOUTHBRIDGE_INTEL_PXHD select SUPERIO_NSC_PC87427 select ROMCC diff --git a/src/mainboard/supermicro/x6dhe_g2/devicetree.cb b/src/mainboard/supermicro/x6dhe_g2/devicetree.cb index 4bb720707c..e621594b93 100644 --- a/src/mainboard/supermicro/x6dhe_g2/devicetree.cb +++ b/src/mainboard/supermicro/x6dhe_g2/devicetree.cb @@ -6,7 +6,7 @@ chip northbridge/intel/e7520 # MCH device pnp 00.3 off end end device pci_domain 0 on - chip southbridge/intel/i82801er # ICH5R + chip southbridge/intel/i82801ex # ICH5R register "pirq_a_d" = "0x0b070a05" register "pirq_e_h" = "0x0a808080" diff --git a/src/mainboard/supermicro/x6dhe_g2/romstage.c b/src/mainboard/supermicro/x6dhe_g2/romstage.c index 4e9c1e270b..f38f4e9b07 100644 --- a/src/mainboard/supermicro/x6dhe_g2/romstage.c +++ b/src/mainboard/supermicro/x6dhe_g2/romstage.c @@ -12,7 +12,7 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "lib/ramtest.c" -#include "southbridge/intel/i82801er/i82801er_early_smbus.c" +#include "southbridge/intel/i82801ex/i82801ex_early_smbus.c" #include "northbridge/intel/e7520/raminit.h" #include "superio/nsc/pc87427/pc87427.h" #include "cpu/x86/lapic/boot_cpu.c" diff --git a/src/mainboard/supermicro/x6dhr_ig/Kconfig b/src/mainboard/supermicro/x6dhr_ig/Kconfig index 759e6d14ba..56653adc9b 100644 --- a/src/mainboard/supermicro/x6dhr_ig/Kconfig +++ b/src/mainboard/supermicro/x6dhr_ig/Kconfig @@ -3,7 +3,7 @@ config BOARD_SUPERMICRO_X6DHR_IG select ARCH_X86 select CPU_INTEL_SOCKET_MPGA604 select NORTHBRIDGE_INTEL_E7520 - select SOUTHBRIDGE_INTEL_I82801ER + select SOUTHBRIDGE_INTEL_I82801EX select SOUTHBRIDGE_INTEL_PXHD select SUPERIO_WINBOND_W83627HF select ROMCC diff --git a/src/mainboard/supermicro/x6dhr_ig/devicetree.cb b/src/mainboard/supermicro/x6dhr_ig/devicetree.cb index 8a82ed7c40..921c54fff5 100644 --- a/src/mainboard/supermicro/x6dhr_ig/devicetree.cb +++ b/src/mainboard/supermicro/x6dhr_ig/devicetree.cb @@ -1,6 +1,6 @@ chip northbridge/intel/e7520 # mch device pci_domain 0 on - chip southbridge/intel/i82801er # i82801er + chip southbridge/intel/i82801ex # i82801er # USB ports device pci 1d.0 on end device pci 1d.1 on end diff --git a/src/mainboard/supermicro/x6dhr_ig/romstage.c b/src/mainboard/supermicro/x6dhr_ig/romstage.c index 314cc70325..0fd77d3a56 100644 --- a/src/mainboard/supermicro/x6dhr_ig/romstage.c +++ b/src/mainboard/supermicro/x6dhr_ig/romstage.c @@ -12,7 +12,7 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "lib/ramtest.c" -#include "southbridge/intel/i82801er/i82801er_early_smbus.c" +#include "southbridge/intel/i82801ex/i82801ex_early_smbus.c" #include "northbridge/intel/e7520/raminit.h" #include "superio/winbond/w83627hf/w83627hf.h" #include "cpu/x86/lapic/boot_cpu.c" diff --git a/src/mainboard/supermicro/x6dhr_ig2/Kconfig b/src/mainboard/supermicro/x6dhr_ig2/Kconfig index e25f8bf7d0..126739be10 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/Kconfig +++ b/src/mainboard/supermicro/x6dhr_ig2/Kconfig @@ -3,7 +3,7 @@ config BOARD_SUPERMICRO_X6DHR_IG2 select ARCH_X86 select CPU_INTEL_SOCKET_MPGA604 select NORTHBRIDGE_INTEL_E7520 - select SOUTHBRIDGE_INTEL_I82801ER + select SOUTHBRIDGE_INTEL_I82801EX select SOUTHBRIDGE_INTEL_PXHD select SUPERIO_WINBOND_W83627HF select ROMCC diff --git a/src/mainboard/supermicro/x6dhr_ig2/devicetree.cb b/src/mainboard/supermicro/x6dhr_ig2/devicetree.cb index ab56509fd9..318d492b9f 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/devicetree.cb +++ b/src/mainboard/supermicro/x6dhr_ig2/devicetree.cb @@ -1,6 +1,6 @@ chip northbridge/intel/e7520 # mch device pci_domain 0 on - chip southbridge/intel/i82801er # i82801er + chip southbridge/intel/i82801ex # i82801er # USB ports device pci 1d.0 on end device pci 1d.1 on end diff --git a/src/mainboard/supermicro/x6dhr_ig2/romstage.c b/src/mainboard/supermicro/x6dhr_ig2/romstage.c index 3cb41ad037..7a9b696198 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/romstage.c +++ b/src/mainboard/supermicro/x6dhr_ig2/romstage.c @@ -12,7 +12,7 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "lib/ramtest.c" -#include "southbridge/intel/i82801er/i82801er_early_smbus.c" +#include "southbridge/intel/i82801ex/i82801ex_early_smbus.c" #include "northbridge/intel/e7520/raminit.h" #include "superio/winbond/w83627hf/w83627hf.h" #include "cpu/x86/lapic/boot_cpu.c" diff --git a/src/mainboard/thomson/ip1000/Kconfig b/src/mainboard/thomson/ip1000/Kconfig index 6a87d0cfc8..b78a20e388 100644 --- a/src/mainboard/thomson/ip1000/Kconfig +++ b/src/mainboard/thomson/ip1000/Kconfig @@ -3,7 +3,7 @@ config BOARD_THOMSON_IP1000 select ARCH_X86 select CPU_INTEL_SOCKET_PGA370 select NORTHBRIDGE_INTEL_I82830 - select SOUTHBRIDGE_INTEL_I82801XX + select SOUTHBRIDGE_INTEL_I82801DX select SUPERIO_SMSC_SMSCSUPERIO select ROMCC select HAVE_PIRQ_TABLE @@ -28,4 +28,4 @@ config HAVE_OPTION_TABLE config IRQ_SLOT_COUNT int default 7 - depends on BOARD_THOMSON_IP1000
\ No newline at end of file + depends on BOARD_THOMSON_IP1000 diff --git a/src/mainboard/thomson/ip1000/devicetree.cb b/src/mainboard/thomson/ip1000/devicetree.cb index 7f5c42a8cf..f38c1c3e67 100644 --- a/src/mainboard/thomson/ip1000/devicetree.cb +++ b/src/mainboard/thomson/ip1000/devicetree.cb @@ -2,7 +2,7 @@ chip northbridge/intel/i82830 # Northbridge device pci_domain 0 on # PCI domain device pci 0.0 on end # Host bridge device pci 2.0 on end # VGA (Intel 82830 CGC) - chip southbridge/intel/i82801xx # Southbridge + chip southbridge/intel/i82801dx # Southbridge register "pirqa_routing" = "0x05" register "pirqb_routing" = "0x06" register "pirqc_routing" = "0x07" diff --git a/src/mainboard/thomson/ip1000/gpio.c b/src/mainboard/thomson/ip1000/gpio.c index ae2cd8eabf..6a69bb539d 100644 --- a/src/mainboard/thomson/ip1000/gpio.c +++ b/src/mainboard/thomson/ip1000/gpio.c @@ -34,8 +34,8 @@ static void mb_gpio_init(void) dev = PCI_DEV(0x0, 0x1f, 0x0); /* Set the value for GPIO base address register and enable GPIO. */ - pci_write_config32(dev, GPIO_BASE_ICH0_5, (ICH_IO_BASE_ADDR | 1)); - pci_write_config8(dev, GPIO_CNTL_ICH0_5, 0x10); + pci_write_config32(dev, GPIO_BASE, (ICH_IO_BASE_ADDR | 1)); + pci_write_config8(dev, GPIO_CNTL, 0x10); /* Set GPIO23 to high, this enables the LAN controller. */ udelay(10); diff --git a/src/mainboard/thomson/ip1000/romstage.c b/src/mainboard/thomson/ip1000/romstage.c index 2f3892e3a0..cf7464442d 100644 --- a/src/mainboard/thomson/ip1000/romstage.c +++ b/src/mainboard/thomson/ip1000/romstage.c @@ -35,8 +35,8 @@ #include "superio/smsc/smscsuperio/smscsuperio_early_serial.c" #include "northbridge/intel/i82830/raminit.h" #include "northbridge/intel/i82830/memory_initialized.c" -#include "southbridge/intel/i82801xx/i82801xx.h" -#include "southbridge/intel/i82801xx/i82801xx_reset.c" +#include "southbridge/intel/i82801dx/i82801dx.h" +#include "southbridge/intel/i82801dx/i82801dx_reset.c" #include "cpu/x86/mtrr/earlymtrr.c" #include "cpu/x86/bist.h" #include "spd_table.h" @@ -44,7 +44,7 @@ #define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1) -#include "southbridge/intel/i82801xx/i82801xx_early_smbus.c" +#include "southbridge/intel/i82801dx/i82801dx_early_smbus.c" /** * The onboard 64MB PC133 memory does not have a SPD EEPROM so the @@ -127,4 +127,4 @@ static void main(unsigned long bist) /* Check RAM. */ /* ram_check(0, 640 * 1024); */ /* ram_check(64512 * 1024, 65536 * 1024); */ -}
\ No newline at end of file +} diff --git a/src/mainboard/tyan/s2735/Kconfig b/src/mainboard/tyan/s2735/Kconfig index 8d516fe660..0c3f8a573d 100644 --- a/src/mainboard/tyan/s2735/Kconfig +++ b/src/mainboard/tyan/s2735/Kconfig @@ -4,7 +4,7 @@ config BOARD_TYAN_S2735 select CPU_INTEL_SOCKET_MPGA604 select NORTHBRIDGE_INTEL_E7501 select SOUTHBRIDGE_INTEL_I82870 - select SOUTHBRIDGE_INTEL_I82801ER + select SOUTHBRIDGE_INTEL_I82801EX select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE select HAVE_MP_TABLE diff --git a/src/mainboard/tyan/s2735/devicetree.cb b/src/mainboard/tyan/s2735/devicetree.cb index 0fdd57814a..8ad5e0ecac 100644 --- a/src/mainboard/tyan/s2735/devicetree.cb +++ b/src/mainboard/tyan/s2735/devicetree.cb @@ -14,7 +14,7 @@ chip northbridge/intel/e7501 end end device pci 6.0 on end - chip southbridge/intel/i82801er + chip southbridge/intel/i82801ex device pci 1d.0 on end device pci 1d.1 on end device pci 1d.2 on end diff --git a/src/mainboard/tyan/s2735/reset.c b/src/mainboard/tyan/s2735/reset.c index 371920dca2..2601faa676 100644 --- a/src/mainboard/tyan/s2735/reset.c +++ b/src/mainboard/tyan/s2735/reset.c @@ -1,7 +1,7 @@ -void i82801er_hard_reset(void); +void i82801ex_hard_reset(void); /* FIXME: There's another hard_reset() in romstage.c. Why? */ void hard_reset(void) { - i82801er_hard_reset(); + i82801ex_hard_reset(); } diff --git a/src/mainboard/tyan/s2735/romstage.c b/src/mainboard/tyan/s2735/romstage.c index 99a38a9fb3..5e2678a047 100644 --- a/src/mainboard/tyan/s2735/romstage.c +++ b/src/mainboard/tyan/s2735/romstage.c @@ -25,7 +25,7 @@ static void post_code(uint8_t value) { } #endif -#include "southbridge/intel/i82801er/i82801er_early_smbus.c" +#include "southbridge/intel/i82801ex/i82801ex_early_smbus.c" #include "northbridge/intel/e7501/raminit.h" #include "cpu/x86/lapic/boot_cpu.c" @@ -82,7 +82,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #if CONFIG_USE_FALLBACK_IMAGE == 1 -#include "southbridge/intel/i82801er/cmos_failover.c" +#include "southbridge/intel/i82801ex/cmos_failover.c" void real_main(unsigned long bist); diff --git a/src/southbridge/intel/Kconfig b/src/southbridge/intel/Kconfig index 92be28623d..61cd79696b 100644 --- a/src/southbridge/intel/Kconfig +++ b/src/southbridge/intel/Kconfig @@ -1,10 +1,11 @@ source src/southbridge/intel/esb6300/Kconfig source src/southbridge/intel/i3100/Kconfig source src/southbridge/intel/i82371eb/Kconfig -source src/southbridge/intel/i82801ca/Kconfig -source src/southbridge/intel/i82801dbm/Kconfig -source src/southbridge/intel/i82801er/Kconfig +source src/southbridge/intel/i82801ax/Kconfig +source src/southbridge/intel/i82801bx/Kconfig +source src/southbridge/intel/i82801cx/Kconfig +source src/southbridge/intel/i82801dx/Kconfig +source src/southbridge/intel/i82801ex/Kconfig source src/southbridge/intel/i82801gx/Kconfig -source src/southbridge/intel/i82801xx/Kconfig source src/southbridge/intel/i82870/Kconfig source src/southbridge/intel/pxhd/Kconfig diff --git a/src/southbridge/intel/Makefile.inc b/src/southbridge/intel/Makefile.inc index e53450f95f..12ba7108ba 100644 --- a/src/southbridge/intel/Makefile.inc +++ b/src/southbridge/intel/Makefile.inc @@ -1,11 +1,12 @@ subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_ESB6300) += esb6300 subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_I3100) += i3100 subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_I82371EB) += i82371eb -subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_I82801CA) += i82801ca -subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_I82801DBM) += i82801dbm -subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_I82801ER) += i82801er +subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_I82801AX) += i82801ax +subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_I82801BX) += i82801bx +subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_I82801CX) += i82801cx +subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_I82801DX) += i82801dx +subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_I82801EX) += i82801ex subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_I82801GX) += i82801gx -subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_I82801XX) += i82801xx subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_I82870) += i82870 subdirs-$(CONFIG_SOUTHBRIDGE_INTEL_PXHD) += pxhd diff --git a/src/southbridge/intel/i82801xx/Kconfig b/src/southbridge/intel/i82801ax/Kconfig index f86c65f2f3..25e2c3aa5f 100644 --- a/src/southbridge/intel/i82801xx/Kconfig +++ b/src/southbridge/intel/i82801ax/Kconfig @@ -18,6 +18,6 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -config SOUTHBRIDGE_INTEL_I82801XX +config SOUTHBRIDGE_INTEL_I82801AX bool diff --git a/src/southbridge/intel/i82801xx/Makefile.inc b/src/southbridge/intel/i82801ax/Makefile.inc index 875141f494..3e66f04569 100644 --- a/src/southbridge/intel/i82801xx/Makefile.inc +++ b/src/southbridge/intel/i82801ax/Makefile.inc @@ -18,21 +18,21 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -driver-y += i82801xx.o -driver-y += i82801xx_ac97.o -driver-y += i82801xx_ide.o -driver-y += i82801xx_lpc.o -driver-y += i82801xx_nic.o -driver-y += i82801xx_pci.o -driver-y += i82801xx_sata.o -# driver-y += i82801xx_smbus.o -driver-y += i82801xx_usb.o -driver-y += i82801xx_usb_ehci.o +driver-y += i82801ax.o +driver-y += i82801ax_ac97.o +driver-y += i82801ax_ide.o +driver-y += i82801ax_lpc.o +driver-y += i82801ax_nic.o +driver-y += i82801ax_pci.o +driver-y += i82801ax_sata.o +# driver-y += i82801ax_smbus.o +driver-y += i82801ax_usb.o +driver-y += i82801ax_usb_ehci.o -obj-y += i82801xx_reset.o -obj-y += i82801xx_watchdog.o +obj-y += i82801ax_reset.o +obj-y += i82801ax_watchdog.o # TODO: What about cmos_failover.c? -# TODO: Fix and enable i82801xx_smbus.o later. +# TODO: Fix and enable i82801ax_smbus.o later. diff --git a/src/southbridge/intel/i82801xx/chip.h b/src/southbridge/intel/i82801ax/chip.h index 443df451c3..90bbfcb7c5 100644 --- a/src/southbridge/intel/i82801xx/chip.h +++ b/src/southbridge/intel/i82801ax/chip.h @@ -19,7 +19,7 @@ */ /* - * The i82801xx code currently supports: + * The i82801ax code currently supports: * - 82801AA * - 82801AB * - 82801BA @@ -32,10 +32,10 @@ * This code should NOT be used for ICH6 and later versions. */ -#ifndef SOUTHBRIDGE_INTEL_I82801XX_CHIP_H -#define SOUTHBRIDGE_INTEL_I82801XX_CHIP_H +#ifndef SOUTHBRIDGE_INTEL_I82801AX_CHIP_H +#define SOUTHBRIDGE_INTEL_I82801AX_CHIP_H -struct southbridge_intel_i82801xx_config { +struct southbridge_intel_i82801ax_config { /** * Interrupt Routing configuration * If bit7 is 1, the interrupt is disabled. @@ -53,6 +53,6 @@ struct southbridge_intel_i82801xx_config { uint8_t ide1_enable; }; -extern struct chip_operations southbridge_intel_i82801xx_ops; +extern struct chip_operations southbridge_intel_i82801ax_ops; #endif diff --git a/src/southbridge/intel/i82801xx/cmos_failover.c b/src/southbridge/intel/i82801ax/cmos_failover.c index 9307f40305..a770005b73 100644 --- a/src/southbridge/intel/i82801xx/cmos_failover.c +++ b/src/southbridge/intel/i82801ax/cmos_failover.c @@ -16,7 +16,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include "i82801xx.h" +#include "i82801ax.h" static void check_cmos_failed(void) { diff --git a/src/southbridge/intel/i82801ax/i82801ax.c b/src/southbridge/intel/i82801ax/i82801ax.c new file mode 100644 index 0000000000..ea4cda67eb --- /dev/null +++ b/src/southbridge/intel/i82801ax/i82801ax.c @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2005 Digital Design Corporation + * (Written by Steven J. Magnani <steve@digidescorp.com> for Digital Design) + * Copyright (C) 2007 Corey Osgood <corey.osgood@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include "i82801ax.h" + +void i82801ax_enable(device_t dev) +{ + unsigned int index = 0; + uint16_t cur_disable_mask, new_disable_mask; + + /* All 82801xx devices should be on bus 0. */ + unsigned int devfn = PCI_DEVFN(0x1f, 0); // LPC + device_t lpc_dev = dev_find_slot(0, devfn); // 0 + if (!lpc_dev) + return; + + /* We're going to assume, perhaps incorrectly, that if a function + * exists it can be disabled. Workarounds for ICH variants that don't + * follow this should be done by checking the device ID. + */ + if (PCI_SLOT(dev->path.pci.devfn) == 31) { + index = PCI_FUNC(dev->path.pci.devfn); + } else if (PCI_SLOT(dev->path.pci.devfn) == 29) { + index = 8 + PCI_FUNC(dev->path.pci.devfn); + } + + /* Function 0 is a bit of an exception. */ + if (index == 0) { + index = 14; + } + + cur_disable_mask = pci_read_config16(lpc_dev, FUNC_DIS); + new_disable_mask = cur_disable_mask & ~(1 << index); /* Enable it. */ + if (!dev->enabled) { + new_disable_mask |= (1 << index); /* Disable it, if desired. */ + } + if (new_disable_mask != cur_disable_mask) { + pci_write_config16(lpc_dev, FUNC_DIS, new_disable_mask); + } +} + +struct chip_operations southbridge_intel_i82801ax_ops = { + CHIP_NAME("Intel ICH/ICH0 (82801AA/AB) Series Southbridge") + .enable_dev = i82801ax_enable, +}; diff --git a/src/southbridge/intel/i82801xx/i82801xx.h b/src/southbridge/intel/i82801ax/i82801ax.h index d90cc32b37..f9b4977c67 100644 --- a/src/southbridge/intel/i82801xx/i82801xx.h +++ b/src/southbridge/intel/i82801ax/i82801ax.h @@ -18,12 +18,12 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#ifndef SOUTHBRIDGE_INTEL_I82801XX_I82801XX_H -#define SOUTHBRIDGE_INTEL_I82801XX_I82801XX_H +#ifndef SOUTHBRIDGE_INTEL_I82801AX_I82801AX_H +#define SOUTHBRIDGE_INTEL_I82801AX_I82801AX_H #if !defined( __ROMCC__ ) && !defined(__PRE_RAM__) #include "chip.h" -extern void i82801xx_enable(device_t dev); +extern void i82801ax_enable(device_t dev); #endif #define PCI_DMA_CFG 0x90 @@ -117,4 +117,4 @@ extern void i82801xx_enable(device_t dev); /* HPET, if present */ #define HPET_ADDR 0xfed0000 -#endif /* SOUTHBRIDGE_INTEL_I82801XX_I82801XX_H */ +#endif /* SOUTHBRIDGE_INTEL_I82801AX_I82801AX_H */ diff --git a/src/southbridge/intel/i82801xx/i82801xx_ac97.c b/src/southbridge/intel/i82801ax/i82801ax_ac97.c index ace04ffaeb..7ef4142d11 100644 --- a/src/southbridge/intel/i82801xx/i82801xx_ac97.c +++ b/src/southbridge/intel/i82801ax/i82801ax_ac97.c @@ -25,7 +25,7 @@ #include <device/device.h> #include <device/pci.h> #include <device/pci_ids.h> -#include "i82801xx.h" +#include "i82801ax.h" static struct device_operations ac97_ops = { .read_resources = pci_dev_read_resources, @@ -33,7 +33,7 @@ static struct device_operations ac97_ops = { .enable_resources = pci_dev_enable_resources, .init = 0, .scan_bus = 0, - .enable = i82801xx_enable, + .enable = i82801ax_enable, }; /* 82801AA (ICH) */ diff --git a/src/southbridge/intel/i82801xx/i82801xx_early_lpc.c b/src/southbridge/intel/i82801ax/i82801ax_early_lpc.c index 3ae91d7943..abcf9c60dc 100644 --- a/src/southbridge/intel/i82801xx/i82801xx_early_lpc.c +++ b/src/southbridge/intel/i82801ax/i82801ax_early_lpc.c @@ -18,7 +18,7 @@ * */ -static void i82801xx_halt_tco_timer(void) +static void i82801ax_halt_tco_timer(void) { device_t dev; uint16_t halt_tco_timer; diff --git a/src/southbridge/intel/i82801xx/i82801xx_early_smbus.c b/src/southbridge/intel/i82801ax/i82801ax_early_smbus.c index d1bd051be0..d80c29c159 100644 --- a/src/southbridge/intel/i82801xx/i82801xx_early_smbus.c +++ b/src/southbridge/intel/i82801ax/i82801ax_early_smbus.c @@ -21,8 +21,8 @@ */ #include <device/pci_ids.h> -#include "i82801xx.h" -#include "i82801xx_smbus.h" +#include "i82801ax.h" +#include "i82801ax_smbus.h" static void enable_smbus(void) { diff --git a/src/southbridge/intel/i82801xx/i82801xx_ide.c b/src/southbridge/intel/i82801ax/i82801ax_ide.c index 4173cc6a75..c13fb4d34a 100644 --- a/src/southbridge/intel/i82801xx/i82801xx_ide.c +++ b/src/southbridge/intel/i82801ax/i82801ax_ide.c @@ -25,9 +25,9 @@ #include <device/device.h> #include <device/pci.h> #include <device/pci_ids.h> -#include "i82801xx.h" +#include "i82801ax.h" -typedef struct southbridge_intel_i82801xx_config config_t; +typedef struct southbridge_intel_i82801ax_config config_t; static void ide_init(struct device *dev) { @@ -67,7 +67,7 @@ static struct device_operations ide_ops = { .enable_resources = pci_dev_enable_resources, .init = ide_init, .scan_bus = 0, - .enable = i82801xx_enable, + .enable = i82801ax_enable, }; /* 82801AA */ diff --git a/src/southbridge/intel/i82801xx/i82801xx_lpc.c b/src/southbridge/intel/i82801ax/i82801ax_lpc.c index f7fae37cb3..590f057ef7 100644 --- a/src/southbridge/intel/i82801xx/i82801xx_lpc.c +++ b/src/southbridge/intel/i82801ax/i82801ax_lpc.c @@ -30,13 +30,13 @@ #include <pc80/mc146818rtc.h> #include <pc80/isa-dma.h> #include <arch/io.h> -#include "i82801xx.h" +#include "i82801ax.h" #define GPIO_BASE_ADDR 0x00000500 /* GPIO Base Address Register */ #define NMI_OFF 0 -typedef struct southbridge_intel_i82801xx_config config_t; +typedef struct southbridge_intel_i82801ax_config config_t; /* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control * 0x00 - 0000 = Reserved @@ -74,7 +74,7 @@ typedef struct southbridge_intel_i82801xx_config config_t; * specific IRQ values in your mainboards Config.lb. */ -void i82801xx_enable_apic(struct device *dev) +void i82801ax_enable_apic(struct device *dev) { uint32_t reg32; volatile uint32_t *ioapic_index = (volatile uint32_t *)0xfec00000; @@ -108,7 +108,7 @@ void i82801xx_enable_apic(struct device *dev) *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */ } -void i82801xx_enable_serial_irqs(struct device *dev) +void i82801ax_enable_serial_irqs(struct device *dev) { /* Set packet length and toggle silent mode bit. */ pci_write_config8(dev, SERIRQ_CNTL, @@ -118,7 +118,7 @@ void i82801xx_enable_serial_irqs(struct device *dev) /* TODO: Explain/#define the real meaning of these magic numbers. */ } -static void i82801xx_pirq_init(device_t dev, uint16_t ich_model) +static void i82801ax_pirq_init(device_t dev, uint16_t ich_model) { /* Get the chip configuration */ config_t *config = dev->chip_info; @@ -176,7 +176,7 @@ static void i82801xx_pirq_init(device_t dev, uint16_t ich_model) } } -static void i82801xx_power_options(device_t dev) +static void i82801ax_power_options(device_t dev) { uint8_t byte; int pwr_on = -1; @@ -220,7 +220,7 @@ static void gpio_init(device_t dev, uint16_t ich_model) } } -void i82801xx_rtc_init(struct device *dev) +void i82801ax_rtc_init(struct device *dev) { uint8_t reg8; uint32_t reg32; @@ -240,7 +240,7 @@ void i82801xx_rtc_init(struct device *dev) pci_write_config8(dev, RTC_CONF, 0x04); } -void i82801xx_lpc_route_dma(struct device *dev, uint8_t mask) +void i82801ax_lpc_route_dma(struct device *dev, uint8_t mask) { uint16_t reg16; int i; @@ -255,7 +255,7 @@ void i82801xx_lpc_route_dma(struct device *dev, uint8_t mask) pci_write_config16(dev, PCI_DMA_CFG, reg16); } -static void i82801xx_lpc_decode_en(device_t dev, uint16_t ich_model) +static void i82801ax_lpc_decode_en(device_t dev, uint16_t ich_model) { /* Decode 0x3F8-0x3FF (COM1) for COMA port, 0x2F8-0x2FF (COM2) for COMB. * LPT decode defaults to 0x378-0x37F and 0x778-0x77F. @@ -302,36 +302,36 @@ static void lpc_init(struct device *dev) pci_write_config16(dev, PCI_COMMAND, 0x000f); /* IO APIC initialization. */ - i82801xx_enable_apic(dev); + i82801ax_enable_apic(dev); - i82801xx_enable_serial_irqs(dev); + i82801ax_enable_serial_irqs(dev); /* Setup the PIRQ. */ - i82801xx_pirq_init(dev, ich_model); + i82801ax_pirq_init(dev, ich_model); /* Setup power options. */ - i82801xx_power_options(dev); + i82801ax_power_options(dev); /* Set the state of the GPIO lines. */ gpio_init(dev, ich_model); /* Initialize the real time clock. */ - i82801xx_rtc_init(dev); + i82801ax_rtc_init(dev); /* Route DMA. */ - i82801xx_lpc_route_dma(dev, 0xff); + i82801ax_lpc_route_dma(dev, 0xff); /* Initialize ISA DMA. */ isa_dma_init(); /* Setup decode ports and LPC I/F enables. */ - i82801xx_lpc_decode_en(dev, ich_model); + i82801ax_lpc_decode_en(dev, ich_model); /* Initialize the High Precision Event Timers, if present. */ enable_hpet(dev); } -static void i82801xx_lpc_read_resources(device_t dev) +static void i82801ax_lpc_read_resources(device_t dev) { struct resource *res; @@ -357,19 +357,19 @@ static void i82801xx_lpc_read_resources(device_t dev) res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } -static void i82801xx_lpc_enable_resources(device_t dev) +static void i82801ax_lpc_enable_resources(device_t dev) { pci_dev_enable_resources(dev); enable_childrens_resources(dev); } static struct device_operations lpc_ops = { - .read_resources = i82801xx_lpc_read_resources, + .read_resources = i82801ax_lpc_read_resources, .set_resources = pci_dev_set_resources, - .enable_resources = i82801xx_lpc_enable_resources, + .enable_resources = i82801ax_lpc_enable_resources, .init = lpc_init, .scan_bus = scan_static_bus, - .enable = i82801xx_enable, + .enable = i82801ax_enable, }; static const struct pci_driver i82801aa_lpc __pci_driver = { diff --git a/src/southbridge/intel/i82801xx/i82801xx_nic.c b/src/southbridge/intel/i82801ax/i82801ax_nic.c index 3728d28bd7..3728d28bd7 100644 --- a/src/southbridge/intel/i82801xx/i82801xx_nic.c +++ b/src/southbridge/intel/i82801ax/i82801ax_nic.c diff --git a/src/southbridge/intel/i82801xx/i82801xx_pci.c b/src/southbridge/intel/i82801ax/i82801ax_pci.c index 1f01e5dc46..1f01e5dc46 100644 --- a/src/southbridge/intel/i82801xx/i82801xx_pci.c +++ b/src/southbridge/intel/i82801ax/i82801ax_pci.c diff --git a/src/southbridge/intel/i82801xx/i82801xx_reset.c b/src/southbridge/intel/i82801ax/i82801ax_reset.c index 239a727968..239a727968 100644 --- a/src/southbridge/intel/i82801xx/i82801xx_reset.c +++ b/src/southbridge/intel/i82801ax/i82801ax_reset.c diff --git a/src/southbridge/intel/i82801xx/i82801xx_sata.c b/src/southbridge/intel/i82801ax/i82801ax_sata.c index de8b3b02cf..5d6d6f204e 100644 --- a/src/southbridge/intel/i82801xx/i82801xx_sata.c +++ b/src/southbridge/intel/i82801ax/i82801ax_sata.c @@ -23,7 +23,7 @@ #include <device/device.h> #include <device/pci.h> #include <device/pci_ids.h> -#include "i82801xx.h" +#include "i82801ax.h" /* TODO: Set dynamically, if the user only wants one SATA channel or none * at all. @@ -64,7 +64,7 @@ static struct device_operations sata_ops = { .enable_resources = pci_dev_enable_resources, .init = sata_init, .scan_bus = 0, - .enable = i82801xx_enable, + .enable = i82801ax_enable, }; /* 82801EB */ diff --git a/src/southbridge/intel/i82801xx/i82801xx_smbus.c b/src/southbridge/intel/i82801ax/i82801ax_smbus.c index 1608650be5..739cfdb988 100644 --- a/src/southbridge/intel/i82801xx/i82801xx_smbus.c +++ b/src/southbridge/intel/i82801ax/i82801ax_smbus.c @@ -24,7 +24,7 @@ #include <smbus.h> #include <pci.h> #include <arch/io.h> -#include "i82801xx.h" +#include "i82801ax.h" #include "i82801_smbus.h" static int smbus_read_byte(struct bus *bus, device_t dev, u8 address) diff --git a/src/southbridge/intel/i82801xx/i82801xx_smbus.h b/src/southbridge/intel/i82801ax/i82801ax_smbus.h index 7a7850835b..7a7850835b 100644 --- a/src/southbridge/intel/i82801xx/i82801xx_smbus.h +++ b/src/southbridge/intel/i82801ax/i82801ax_smbus.h diff --git a/src/southbridge/intel/i82801xx/i82801xx_usb.c b/src/southbridge/intel/i82801ax/i82801ax_usb.c index 74bbbee17c..a1d36e8600 100644 --- a/src/southbridge/intel/i82801xx/i82801xx_usb.c +++ b/src/southbridge/intel/i82801ax/i82801ax_usb.c @@ -24,7 +24,7 @@ #include <device/device.h> #include <device/pci.h> #include <device/pci_ids.h> -#include "i82801xx.h" +#include "i82801ax.h" static void usb_init(struct device *dev) { @@ -37,7 +37,7 @@ static struct device_operations usb_ops = { .enable_resources = pci_dev_enable_resources, .init = usb_init, .scan_bus = 0, - .enable = i82801xx_enable, + .enable = i82801ax_enable, }; /* 82801AA (ICH) */ diff --git a/src/southbridge/intel/i82801xx/i82801xx_usb_ehci.c b/src/southbridge/intel/i82801ax/i82801ax_usb_ehci.c index 032f19863b..a3f7e7c9fd 100644 --- a/src/southbridge/intel/i82801xx/i82801xx_usb_ehci.c +++ b/src/southbridge/intel/i82801ax/i82801ax_usb_ehci.c @@ -23,7 +23,7 @@ #include <device/device.h> #include <device/pci.h> #include <device/pci_ids.h> -#include "i82801xx.h" +#include "i82801ax.h" static void usb_ehci_init(struct device *dev) { @@ -65,7 +65,7 @@ static struct device_operations usb_ehci_ops = { .enable_resources = pci_dev_enable_resources, .init = usb_ehci_init, .scan_bus = 0, - .enable = i82801xx_enable, + .enable = i82801ax_enable, .ops_pci = &lops_pci, }; diff --git a/src/southbridge/intel/i82801xx/i82801xx_watchdog.c b/src/southbridge/intel/i82801ax/i82801ax_watchdog.c index aea10e1c7b..aea10e1c7b 100644 --- a/src/southbridge/intel/i82801xx/i82801xx_watchdog.c +++ b/src/southbridge/intel/i82801ax/i82801ax_watchdog.c diff --git a/src/southbridge/intel/i82801bx/Kconfig b/src/southbridge/intel/i82801bx/Kconfig new file mode 100644 index 0000000000..682b725af0 --- /dev/null +++ b/src/southbridge/intel/i82801bx/Kconfig @@ -0,0 +1,23 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +config SOUTHBRIDGE_INTEL_I82801BX + bool + diff --git a/src/southbridge/intel/i82801bx/Makefile.inc b/src/southbridge/intel/i82801bx/Makefile.inc new file mode 100644 index 0000000000..3d7d61836a --- /dev/null +++ b/src/southbridge/intel/i82801bx/Makefile.inc @@ -0,0 +1,38 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +driver-y += i82801bx.o +driver-y += i82801bx_ac97.o +driver-y += i82801bx_ide.o +driver-y += i82801bx_lpc.o +driver-y += i82801bx_nic.o +driver-y += i82801bx_pci.o +driver-y += i82801bx_sata.o +# driver-y += i82801bx_smbus.o +driver-y += i82801bx_usb.o +driver-y += i82801bx_usb_ehci.o + +obj-y += i82801bx_reset.o +obj-y += i82801bx_watchdog.o + +# TODO: What about cmos_failover.c? + +# TODO: Fix and enable i82801bx_smbus.o later. + diff --git a/src/southbridge/intel/i82801bx/chip.h b/src/southbridge/intel/i82801bx/chip.h new file mode 100644 index 0000000000..a168e8502e --- /dev/null +++ b/src/southbridge/intel/i82801bx/chip.h @@ -0,0 +1,58 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Corey Osgood <corey_osgood@verizon.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * The i82801bx code currently supports: + * - 82801AA + * - 82801AB + * - 82801BA + * - 82801CA + * - 82801DB + * - 82801DBM + * - 82801EB + * - 82801ER + * + * This code should NOT be used for ICH6 and later versions. + */ + +#ifndef SOUTHBRIDGE_INTEL_I82801BX_CHIP_H +#define SOUTHBRIDGE_INTEL_I82801BX_CHIP_H + +struct southbridge_intel_i82801bx_config { + /** + * Interrupt Routing configuration + * If bit7 is 1, the interrupt is disabled. + */ + uint8_t pirqa_routing; + uint8_t pirqb_routing; + uint8_t pirqc_routing; + uint8_t pirqd_routing; + uint8_t pirqe_routing; + uint8_t pirqf_routing; + uint8_t pirqg_routing; + uint8_t pirqh_routing; + + uint8_t ide0_enable; + uint8_t ide1_enable; +}; + +extern struct chip_operations southbridge_intel_i82801bx_ops; + +#endif diff --git a/src/southbridge/intel/i82801bx/cmos_failover.c b/src/southbridge/intel/i82801bx/cmos_failover.c new file mode 100644 index 0000000000..d2e4081da0 --- /dev/null +++ b/src/southbridge/intel/i82801bx/cmos_failover.c @@ -0,0 +1,32 @@ +/* + * This file is part of the coreboot project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "i82801bx.h" + +static void check_cmos_failed(void) +{ + uint8_t byte; + byte = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); + if (byte & RTC_FAILED) { + //clear bit 1 and bit 2 + byte = cmos_read(RTC_BOOT_BYTE); + byte &= 0x0c; + byte |= CONFIG_MAX_REBOOT_CNT << 4; + cmos_write(byte, RTC_BOOT_BYTE); + } +} diff --git a/src/southbridge/intel/i82801xx/i82801xx.c b/src/southbridge/intel/i82801bx/i82801bx.c index 385b122d47..2352723935 100644 --- a/src/southbridge/intel/i82801xx/i82801xx.c +++ b/src/southbridge/intel/i82801bx/i82801bx.c @@ -23,9 +23,9 @@ #include <console/console.h> #include <device/device.h> #include <device/pci.h> -#include "i82801xx.h" +#include "i82801bx.h" -void i82801xx_enable(device_t dev) +void i82801bx_enable(device_t dev) { unsigned int index = 0; uint16_t cur_disable_mask, new_disable_mask; @@ -61,7 +61,7 @@ void i82801xx_enable(device_t dev) } } -struct chip_operations southbridge_intel_i82801xx_ops = { - CHIP_NAME("Intel 82801 Series Southbridge") - .enable_dev = i82801xx_enable, +struct chip_operations southbridge_intel_i82801bx_ops = { + CHIP_NAME("Intel ICH2 (82801Bx) Series Southbridge") + .enable_dev = i82801bx_enable, }; diff --git a/src/southbridge/intel/i82801bx/i82801bx.h b/src/southbridge/intel/i82801bx/i82801bx.h new file mode 100644 index 0000000000..9705beed36 --- /dev/null +++ b/src/southbridge/intel/i82801bx/i82801bx.h @@ -0,0 +1,121 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Corey Osgood <corey.osgood@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef SOUTHBRIDGE_INTEL_I82801BX_I82801BX_H +#define SOUTHBRIDGE_INTEL_I82801BX_I82801BX_H + +#if !defined( __ROMCC__ ) && !defined(__PRE_RAM__) +#include "chip.h" +extern void i82801bx_enable(device_t dev); +#endif + +#define PCI_DMA_CFG 0x90 +#define SERIRQ_CNTL 0x64 +#define GEN_CNTL 0xd0 +#define GEN_STS 0xd4 +#define RTC_CONF 0xd8 +#define GEN_PMCON_3 0xa4 + +#define PMBASE 0x40 +#define PMBASE_ADDR 0x0400 /* ACPI Base Address Register */ +#define ACPI_CNTL 0x44 +#define BIOS_CNTL 0x4E +#define GPIO_BASE_ICH0_5 0x58 /* LPC GPIO Base Addr. Reg. (ICH0-ICH5) */ +#define GPIO_BASE_ICH6_9 0x48 /* LPC GPIO Base Address Register (ICH6-ICH9) */ +#define GPIO_CNTL_ICH0_5 0x5C /* LPC GPIO Control Register (ICH0-ICH5) */ +#define GPIO_CNTL_ICH6_9 0x4C /* LPC GPIO Control Register (ICH6-ICH9) */ + +#define PIRQA_ROUT 0x60 +#define PIRQB_ROUT 0x61 +#define PIRQC_ROUT 0x62 +#define PIRQD_ROUT 0x63 +#define PIRQE_ROUT 0x68 +#define PIRQF_ROUT 0x69 +#define PIRQG_ROUT 0x6A +#define PIRQH_ROUT 0x6B + +#define FUNC_DIS 0xF2 + +#define COM_DEC 0xE0 /* LPC I/F Communication Port Decode Ranges (ICH0-ICH5) */ +#define LPC_IO_DEC 0x80 /* IO Decode Ranges Register (ICH6-ICH9) */ +#define LPC_EN_ICH0_5 0xE6 /* LPC IF Enables Register (ICH0-ICH5) */ +#define LPC_EN_ICH6_9 0x82 /* LPC IF Enables Register (ICH6-ICH9) */ + +#define SBUS_NUM 0x19 +#define SUB_BUS_NUM 0x1A +#define SMLT 0x1B +#define IOBASE 0x1C +#define IOLIM 0x1D +#define MEMBASE 0x20 +#define MEMLIM 0x22 +#define CNF 0x50 +#define MTT 0x70 +#define PCI_MAST_STS 0x82 + +#define TCOBASE 0x60 /* TCO Base Address Register */ +#define TCO1_CNT 0x08 /* TCO1 Control Register */ + +/* GEN_PMCON_3 bits */ +#define RTC_BATTERY_DEAD (1 << 2) +#define RTC_POWER_FAILED (1 << 1) +#define SLEEP_AFTER_POWER_FAIL (1 << 0) + +/* PCI Configuration Space (D31:F1) */ +#define IDE_TIM_PRI 0x40 /* IDE timings, primary */ +#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */ + +/* IDE_TIM bits */ +#define IDE_DECODE_ENABLE (1 << 15) + +/* PCI Configuration Space (D31:F3) */ +#define SMB_BASE 0x20 +#define HOSTC 0x40 + +/* HOSTC bits */ +#define I2C_EN (1 << 2) +#define SMB_SMI_EN (1 << 1) +#define HST_EN (1 << 0) + +/* SMBus I/O bits. + * TODO: Does it matter where we put the SMBus IO base, as long as we keep + * consistent and don't interfere with anything else? + */ +/* #define SMBUS_IO_BASE 0x1000 */ +#define SMBUS_IO_BASE 0x0f00 + +#define SMBHSTSTAT 0x0 +#define SMBHSTCTL 0x2 +#define SMBHSTCMD 0x3 +#define SMBXMITADD 0x4 +#define SMBHSTDAT0 0x5 +#define SMBHSTDAT1 0x6 +#define SMBBLKDAT 0x7 +#define SMBTRNSADD 0x9 +#define SMBSLVDATA 0xa +#define SMLINK_PIN_CTL 0xe +#define SMBUS_PIN_CTL 0xf + +#define SMBUS_TIMEOUT (10 * 1000 * 100) + +/* HPET, if present */ +#define HPET_ADDR 0xfed0000 + +#endif /* SOUTHBRIDGE_INTEL_I82801BX_I82801BX_H */ + diff --git a/src/southbridge/intel/i82801bx/i82801bx_ac97.c b/src/southbridge/intel/i82801bx/i82801bx_ac97.c new file mode 100644 index 0000000000..2966d204e4 --- /dev/null +++ b/src/southbridge/intel/i82801bx/i82801bx_ac97.c @@ -0,0 +1,128 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2005 Tyan Computer + * (Written by Yinghai Lu <yinghailu@gmail.com> for Tyan Computer) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This code should work for all ICH* southbridges with AC97 audio/modem. */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include "i82801bx.h" + +static struct device_operations ac97_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = 0, + .scan_bus = 0, + .enable = i82801bx_enable, +}; + +/* 82801AA (ICH) */ +static const struct pci_driver i82801aa_ac97_audio __pci_driver = { + .ops = &ac97_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801AA_AC97_AUDIO, +}; + +static const struct pci_driver i82801aa_ac97_modem __pci_driver = { + .ops = &ac97_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801AA_AC97_MODEM, +}; + +/* 82801AB (ICH0) */ +static const struct pci_driver i82801ab_ac97_audio __pci_driver = { + .ops = &ac97_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801AB_AC97_AUDIO, +}; + +static const struct pci_driver i82801ab_ac97_modem __pci_driver = { + .ops = &ac97_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801AB_AC97_MODEM, +}; + +/* 82801BA/BAM (ICH2/ICH2-M) */ +static const struct pci_driver i82801ba_ac97_audio __pci_driver = { + .ops = &ac97_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801BA_AC97_AUDIO, +}; + +static const struct pci_driver i82801ba_ac97_modem __pci_driver = { + .ops = &ac97_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801BA_AC97_MODEM, +}; + +/* 82801CA/CAM (ICH3-S/ICH3-M) */ +static const struct pci_driver i82801ca_ac97_audio __pci_driver = { + .ops = &ac97_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801CA_AC97_AUDIO, +}; + +static const struct pci_driver i82801ca_ac97_modem __pci_driver = { + .ops = &ac97_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801CA_AC97_MODEM, +}; + +/* 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) */ +static const struct pci_driver i82801db_ac97_audio __pci_driver = { + .ops = &ac97_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801DB_AC97_AUDIO, +}; + +static const struct pci_driver i82801db_ac97_modem __pci_driver = { + .ops = &ac97_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801DB_AC97_MODEM, +}; + +/* 82801EB/ER (ICH5/ICH5R) */ +static const struct pci_driver i82801eb_ac97_audio __pci_driver = { + .ops = &ac97_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801EB_AC97_AUDIO, +}; + +static const struct pci_driver i82801eb_ac97_modem __pci_driver = { + .ops = &ac97_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801EB_AC97_MODEM, +}; + +/* 82801FB/FR/FW/FRW/FBM (ICH6/ICH6R/ICH6W/ICH6RW/ICH6-M) */ +static const struct pci_driver i82801fb_ac97_audio __pci_driver = { + .ops = &ac97_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801FB_AC97_AUDIO, +}; + +static const struct pci_driver i82801fb_ac97_modem __pci_driver = { + .ops = &ac97_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801FB_AC97_MODEM, +}; diff --git a/src/southbridge/intel/i82801bx/i82801bx_early_lpc.c b/src/southbridge/intel/i82801bx/i82801bx_early_lpc.c new file mode 100644 index 0000000000..b64c3d89f8 --- /dev/null +++ b/src/southbridge/intel/i82801bx/i82801bx_early_lpc.c @@ -0,0 +1,40 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Joseph Smith <joe@settoplinux.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +static void i82801bx_halt_tco_timer(void) +{ + device_t dev; + uint16_t halt_tco_timer; + + /* Set the LPC device statically. */ + dev = PCI_DEV(0x0, 0x1f, 0x0); + + /* Temporarily set ACPI base address (I/O space). */ + pci_write_config32(dev, PMBASE, (PMBASE_ADDR | 1)); + + /* Temporarily enable ACPI I/O. */ + pci_write_config8(dev, ACPI_CNTL, 0x10); + + /* Halt the TCO timer, preventing SMI and automatic reboot */ + outw(inw(PMBASE_ADDR + TCOBASE + TCO1_CNT) | (1 << 11), PMBASE_ADDR + TCOBASE + TCO1_CNT); + + /* Disable ACPI I/O. */ + pci_write_config8(dev, ACPI_CNTL, 0x00); +} diff --git a/src/southbridge/intel/i82801bx/i82801bx_early_smbus.c b/src/southbridge/intel/i82801bx/i82801bx_early_smbus.c new file mode 100644 index 0000000000..b8ec9b7528 --- /dev/null +++ b/src/southbridge/intel/i82801bx/i82801bx_early_smbus.c @@ -0,0 +1,81 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2005 Tyan Computer + * (Written by Yinghai Lu <yinghailu@gmail.com> for Tyan Computer) + * Copyright (C) 2007 Corey Osgood <corey.osgood@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/pci_ids.h> +#include "i82801bx.h" +#include "i82801bx_smbus.h" + +static void enable_smbus(void) +{ + device_t dev; + uint16_t device_id; + + /* Set the SMBus device statically. */ + dev = PCI_DEV(0x0, 0x1f, 0x3); + + /* Check to make sure we've got the right device. */ + device_id = pci_read_config16(dev, 0x2); + + /* Clear bits 7-4 (the only bits that vary between models). */ + device_id &= 0xff0f; + + if (device_id != 0x2403) { + die("Device not found, Corey probably screwed up!"); + } + + /* Set SMBus I/O base. */ + pci_write_config32(dev, SMB_BASE, + SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO); + + /* Set SMBus enable. */ + pci_write_config8(dev, HOSTC, HST_EN); + + /* Set SMBus I/O space enable. */ + pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO); + + /* Disable interrupt generation. */ + outb(0, SMBUS_IO_BASE + SMBHSTCTL); + + /* Clear any lingering errors, so transactions can run. */ + outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); + + print_debug("SMBus controller enabled\r\n"); +} + +static inline int smbus_read_byte(unsigned device, unsigned address) +{ + return do_smbus_read_byte(device, address); +} + +static void smbus_write_byte(unsigned device, unsigned address, + unsigned char val) +{ + print_err("Unimplemented smbus_write_byte() called\r\n"); + return; +} + +static inline int smbus_write_block(unsigned device, unsigned length, + unsigned cmd, unsigned data1, + unsigned data2) +{ + return do_smbus_write_block(device, length, cmd, data1, data2); +} diff --git a/src/southbridge/intel/i82801bx/i82801bx_ide.c b/src/southbridge/intel/i82801bx/i82801bx_ide.c new file mode 100644 index 0000000000..9bfab00399 --- /dev/null +++ b/src/southbridge/intel/i82801bx/i82801bx_ide.c @@ -0,0 +1,120 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2005 Tyan Computer + * (Written by Yinghai Lu <yinghailu@gmail.com> for Tyan Computer) + * Copyright (C) 2005 Digital Design Corporation + * (Written by Steven J. Magnani <steve@digidescorp.com> for Digital Design) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include "i82801bx.h" + +typedef struct southbridge_intel_i82801bx_config config_t; + +static void ide_init(struct device *dev) +{ + /* Get the chip configuration */ + config_t *config = dev->chip_info; + + /* TODO: Needs to be tested for compatibility with ICH5(R). */ + /* Enable IDE devices so the Linux IDE driver will work. */ + uint16_t ideTimingConfig; + + ideTimingConfig = pci_read_config16(dev, IDE_TIM_PRI); + ideTimingConfig &= ~IDE_DECODE_ENABLE; + if (!config || config->ide0_enable) { + /* Enable primary IDE interface. */ + ideTimingConfig |= IDE_DECODE_ENABLE; + printk_debug("IDE0: Primary IDE interface is enabled\n"); + } else { + printk_info("IDE0: Primary IDE interface is disabled\n"); + } + pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig); + + ideTimingConfig = pci_read_config16(dev, IDE_TIM_SEC); + ideTimingConfig &= ~IDE_DECODE_ENABLE; + if (!config || config->ide1_enable) { + /* Enable secondary IDE interface. */ + ideTimingConfig |= IDE_DECODE_ENABLE; + printk_debug("IDE1: Secondary IDE interface is enabled\n"); + } else { + printk_info("IDE1: Secondary IDE interface is disabled\n"); + } + pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig); +} + +static struct device_operations ide_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = ide_init, + .scan_bus = 0, + .enable = i82801bx_enable, +}; + +/* 82801AA */ +static const struct pci_driver i82801aa_ide __pci_driver = { + .ops = &ide_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x2411, +}; + +/* 82801AB */ +static const struct pci_driver i82801ab_ide __pci_driver = { + .ops = &ide_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x2421, +}; + +/* 82801BA */ +static const struct pci_driver i82801ba_ide __pci_driver = { + .ops = &ide_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x244b, +}; + +/* 82801CA */ +static const struct pci_driver i82801ca_ide __pci_driver = { + .ops = &ide_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x248b, +}; + +/* 82801DB */ +static const struct pci_driver i82801db_ide __pci_driver = { + .ops = &ide_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x24cb, +}; + +/* 82801DBM */ +static const struct pci_driver i82801dbm_ide __pci_driver = { + .ops = &ide_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x24ca, +}; + +/* 82801EB & 82801ER */ +static const struct pci_driver i82801ex_ide __pci_driver = { + .ops = &ide_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x24db, +}; diff --git a/src/southbridge/intel/i82801bx/i82801bx_lpc.c b/src/southbridge/intel/i82801bx/i82801bx_lpc.c new file mode 100644 index 0000000000..4691ed4137 --- /dev/null +++ b/src/southbridge/intel/i82801bx/i82801bx_lpc.c @@ -0,0 +1,416 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2003 Linux Networx + * Copyright (C) 2003 SuSE Linux AG + * Copyright (C) 2005 Tyan Computer + * (Written by Yinghai Lu <yinghailu@gmail.com> for Tyan Computer) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* From 82801DBM, needs to be fixed to support everything the 82801ER does. */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <pc80/mc146818rtc.h> +#include <pc80/isa-dma.h> +#include <arch/io.h> +#include "i82801bx.h" + +#define GPIO_BASE_ADDR 0x00000500 /* GPIO Base Address Register */ + +#define NMI_OFF 0 + +typedef struct southbridge_intel_i82801bx_config config_t; + +/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control + * 0x00 - 0000 = Reserved + * 0x01 - 0001 = Reserved + * 0x02 - 0010 = Reserved + * 0x03 - 0011 = IRQ3 + * 0x04 - 0100 = IRQ4 + * 0x05 - 0101 = IRQ5 + * 0x06 - 0110 = IRQ6 + * 0x07 - 0111 = IRQ7 + * 0x08 - 1000 = Reserved + * 0x09 - 1001 = IRQ9 + * 0x0A - 1010 = IRQ10 + * 0x0B - 1011 = IRQ11 + * 0x0C - 1100 = IRQ12 + * 0x0D - 1101 = Reserved + * 0x0E - 1110 = IRQ14 + * 0x0F - 1111 = IRQ15 + * PIRQ[n]_ROUT[7] - PIRQ Routing Control + * 0x80 - The PIRQ is not routed. + */ + +#define PIRQA 0x03 +#define PIRQB 0x04 +#define PIRQC 0x05 +#define PIRQD 0x06 +#define PIRQE 0x07 +#define PIRQF 0x09 +#define PIRQG 0x0A +#define PIRQH 0x0B + +/* + * Use 0x0ef8 for a bitmap to cover all these IRQ's. + * Use the defined IRQ values above or set mainboard + * specific IRQ values in your mainboards Config.lb. +*/ + +void i82801bx_enable_apic(struct device *dev) +{ + uint32_t reg32; + volatile uint32_t *ioapic_index = (volatile uint32_t *)0xfec00000; + volatile uint32_t *ioapic_data = (volatile uint32_t *)0xfec00010; + + /* Set ACPI base address (I/O space). */ + pci_write_config32(dev, PMBASE, (PMBASE_ADDR | 1)); + + /* Enable ACPI I/O and power management. */ + pci_write_config8(dev, ACPI_CNTL, 0x10); + + reg32 = pci_read_config32(dev, GEN_CNTL); + reg32 |= (3 << 7); /* Enable IOAPIC */ + reg32 |= (1 << 13); /* Coprocessor error enable */ + reg32 |= (1 << 1); /* Delayed transaction enable */ + reg32 |= (1 << 2); /* DMA collection buffer enable */ + pci_write_config32(dev, GEN_CNTL, reg32); + printk_debug("IOAPIC Southbridge enabled %x\n", reg32); + + *ioapic_index = 0; + *ioapic_data = (1 << 25); + + *ioapic_index = 0; + reg32 = *ioapic_data; + printk_debug("Southbridge APIC ID = %x\n", reg32); + if (reg32 != (1 << 25)) + die("APIC Error\n"); + + /* TODO: From i82801ca, needed/useful on other ICH? */ + *ioapic_index = 3; /* Select Boot Configuration register. */ + *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */ +} + +void i82801bx_enable_serial_irqs(struct device *dev) +{ + /* Set packet length and toggle silent mode bit. */ + pci_write_config8(dev, SERIRQ_CNTL, + (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0)); + pci_write_config8(dev, SERIRQ_CNTL, + (1 << 7) | (0 << 6) | ((21 - 17) << 2) | (0 << 0)); + /* TODO: Explain/#define the real meaning of these magic numbers. */ +} + +static void i82801bx_pirq_init(device_t dev, uint16_t ich_model) +{ + /* Get the chip configuration */ + config_t *config = dev->chip_info; + + if (config->pirqa_routing) { + pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing); + } else { + pci_write_config8(dev, PIRQA_ROUT, PIRQA); + } + + if (config->pirqb_routing) { + pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing); + } else { + pci_write_config8(dev, PIRQB_ROUT, PIRQB); + } + + if (config->pirqc_routing) { + pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing); + } else { + pci_write_config8(dev, PIRQC_ROUT, PIRQC); + } + + if (config->pirqd_routing) { + pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing); + } else { + pci_write_config8(dev, PIRQD_ROUT, PIRQD); + } + + /* Route PIRQE - PIRQH (for ICH2-ICH9). */ + if (ich_model >= 0x2440) { + + if (config->pirqe_routing) { + pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing); + } else { + pci_write_config8(dev, PIRQE_ROUT, PIRQE); + } + + if (config->pirqf_routing) { + pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing); + } else { + pci_write_config8(dev, PIRQF_ROUT, PIRQF); + } + + if (config->pirqg_routing) { + pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing); + } else { + pci_write_config8(dev, PIRQG_ROUT, PIRQG); + } + + if (config->pirqh_routing) { + pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing); + } else { + pci_write_config8(dev, PIRQH_ROUT, PIRQH); + } + } +} + +static void i82801bx_power_options(device_t dev) +{ + uint8_t byte; + int pwr_on = -1; + int nmi_option; + + /* power after power fail */ + /* FIXME this doesn't work! */ + /* Which state do we want to goto after g3 (power restored)? + * 0 == S0 Full On + * 1 == S5 Soft Off + */ + pci_write_config8(dev, GEN_PMCON_3, pwr_on ? 0 : 1); + printk_info("Set power %s if power fails\n", pwr_on ? "on" : "off"); + + /* Set up NMI on errors. */ + byte = inb(0x61); + byte &= ~(1 << 3); /* IOCHK# NMI Enable */ + byte &= ~(1 << 2); /* PCI SERR# Enable */ + outb(byte, 0x61); + byte = inb(0x70); + + nmi_option = NMI_OFF; + get_option(&nmi_option, "nmi"); + if (nmi_option) { + byte &= ~(1 << 7); /* Set NMI. */ + outb(byte, 0x70); + } +} + +static void gpio_init(device_t dev, uint16_t ich_model) +{ + /* Set the value for GPIO base address register and enable GPIO. + * Note: ICH-ICH5 registers differ from ICH6-ICH9. + */ + if (ich_model <= 0x24D0) { + pci_write_config32(dev, GPIO_BASE_ICH0_5, (GPIO_BASE_ADDR | 1)); + pci_write_config8(dev, GPIO_CNTL_ICH0_5, 0x10); + } else if (ich_model >= 0x2640) { + pci_write_config32(dev, GPIO_BASE_ICH6_9, (GPIO_BASE_ADDR | 1)); + pci_write_config8(dev, GPIO_CNTL_ICH6_9, 0x10); + } +} + +void i82801bx_rtc_init(struct device *dev) +{ + uint8_t reg8; + uint32_t reg32; + int rtc_failed; + + reg8 = pci_read_config8(dev, GEN_PMCON_3); + rtc_failed = reg8 & RTC_BATTERY_DEAD; + if (rtc_failed) { + reg8 &= ~(1 << 1); /* Preserve the power fail state. */ + pci_write_config8(dev, GEN_PMCON_3, reg8); + } + reg32 = pci_read_config32(dev, GEN_STS); + rtc_failed |= reg32 & (1 << 2); + rtc_init(rtc_failed); + + /* Enable access to the upper 128 byte bank of CMOS RAM. */ + pci_write_config8(dev, RTC_CONF, 0x04); +} + +void i82801bx_lpc_route_dma(struct device *dev, uint8_t mask) +{ + uint16_t reg16; + int i; + + reg16 = pci_read_config16(dev, PCI_DMA_CFG); + reg16 &= 0x300; + for (i = 0; i < 8; i++) { + if (i == 4) + continue; + reg16 |= ((mask & (1 << i)) ? 3 : 1) << (i * 2); + } + pci_write_config16(dev, PCI_DMA_CFG, reg16); +} + +static void i82801bx_lpc_decode_en(device_t dev, uint16_t ich_model) +{ + /* Decode 0x3F8-0x3FF (COM1) for COMA port, 0x2F8-0x2FF (COM2) for COMB. + * LPT decode defaults to 0x378-0x37F and 0x778-0x77F. + * Floppy decode defaults to 0x3F0-0x3F5, 0x3F7. + * We also need to set the value for LPC I/F Enables Register. + * Note: ICH-ICH5 registers differ from ICH6-ICH9. + */ + if (ich_model <= 0x24D0) { + pci_write_config8(dev, COM_DEC, 0x10); + pci_write_config16(dev, LPC_EN_ICH0_5, 0x300F); + } else if (ich_model >= 0x2640) { + pci_write_config8(dev, LPC_IO_DEC, 0x10); + pci_write_config16(dev, LPC_EN_ICH6_9, 0x300F); + } +} + +static void enable_hpet(struct device *dev) +{ +#ifdef HPET_PRESENT + uint32_t reg32; + uint32_t code = (0 & 0x3); + + reg32 = pci_read_config32(dev, GEN_CNTL); + reg32 |= (1 << 17); /* Enable HPET. */ + /* + * Bits [16:15] Memory Address Range + * 00 FED0_0000h - FED0_03FFh + * 01 FED0_1000h - FED0_13FFh + * 10 FED0_2000h - FED0_23FFh + * 11 FED0_3000h - FED0_33FFh + */ + reg32 &= ~(3 << 15); /* Clear it */ + reg32 |= (code << 15); + /* TODO: reg32 is never written to anywhere? */ + printk_debug("Enabling HPET @0x%x\n", HPET_ADDR | (code << 12)); +#endif +} + +static void lpc_init(struct device *dev) +{ + uint16_t ich_model = pci_read_config16(dev, PCI_DEVICE_ID); + + /* Set the value for PCI command register. */ + pci_write_config16(dev, PCI_COMMAND, 0x000f); + + /* IO APIC initialization. */ + i82801bx_enable_apic(dev); + + i82801bx_enable_serial_irqs(dev); + + /* Setup the PIRQ. */ + i82801bx_pirq_init(dev, ich_model); + + /* Setup power options. */ + i82801bx_power_options(dev); + + /* Set the state of the GPIO lines. */ + gpio_init(dev, ich_model); + + /* Initialize the real time clock. */ + i82801bx_rtc_init(dev); + + /* Route DMA. */ + i82801bx_lpc_route_dma(dev, 0xff); + + /* Initialize ISA DMA. */ + isa_dma_init(); + + /* Setup decode ports and LPC I/F enables. */ + i82801bx_lpc_decode_en(dev, ich_model); + + /* Initialize the High Precision Event Timers, if present. */ + enable_hpet(dev); +} + +static void i82801bx_lpc_read_resources(device_t dev) +{ + struct resource *res; + + /* Get the normal PCI resources of this device. */ + pci_dev_read_resources(dev); + + /* Add an extra subtractive resource for both memory and I/O. */ + res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); + res->base = 0; + res->size = 0x1000; + res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); + res->base = 0xff800000; + res->size = 0x00800000; /* 8 MB for flash */ + res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | + IORESOURCE_ASSIGNED | IORESOURCE_FIXED; + + res = new_resource(dev, 3); /* IOAPIC */ + res->base = 0xfec00000; + res->size = 0x00001000; + res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; +} + +static void i82801bx_lpc_enable_resources(device_t dev) +{ + pci_dev_enable_resources(dev); + enable_childrens_resources(dev); +} + +static struct device_operations lpc_ops = { + .read_resources = i82801bx_lpc_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = i82801bx_lpc_enable_resources, + .init = lpc_init, + .scan_bus = scan_static_bus, + .enable = i82801bx_enable, +}; + +static const struct pci_driver i82801aa_lpc __pci_driver = { + .ops = &lpc_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x2410, +}; + +static const struct pci_driver i82801ab_lpc __pci_driver = { + .ops = &lpc_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x2420, +}; + +static const struct pci_driver i82801ba_lpc __pci_driver = { + .ops = &lpc_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x2440, +}; + +static const struct pci_driver i82801ca_lpc __pci_driver = { + .ops = &lpc_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x2480, +}; + +static const struct pci_driver i82801db_lpc __pci_driver = { + .ops = &lpc_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x24c0, +}; + +static const struct pci_driver i82801dbm_lpc __pci_driver = { + .ops = &lpc_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x24cc, +}; + +/* 82801EB and 82801ER */ +static const struct pci_driver i82801ex_lpc __pci_driver = { + .ops = &lpc_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x24d0, +}; diff --git a/src/southbridge/intel/i82801bx/i82801bx_nic.c b/src/southbridge/intel/i82801bx/i82801bx_nic.c new file mode 100644 index 0000000000..3728d28bd7 --- /dev/null +++ b/src/southbridge/intel/i82801bx/i82801bx_nic.c @@ -0,0 +1,78 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Corey Osgood <corey.osgood@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This code should work for all ICH* southbridges with a NIC. */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> + +static struct device_operations nic_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = 0, + .scan_bus = 0, +}; + +/* Note: There's no NIC on 82801AA/AB (ICH/ICH0). */ + +/* 82801BA/BAM/CA/CAM (ICH2/ICH2-M/ICH3-S/ICH3-M) */ +static const struct pci_driver i82801ba_nic __pci_driver = { + .ops = &nic_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801BA_LAN, +}; + +/* 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) */ +static const struct pci_driver i82801db_nic __pci_driver = { + .ops = &nic_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801DB_LAN, +}; + +/* 82801EB/ER (ICH5/ICH5R) */ +static const struct pci_driver i82801eb_nic __pci_driver = { + .ops = &nic_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801EB_LAN, +}; + +/* 82801FB/FR/FW/FRW/FBM (ICH6/ICH6R/ICH6W/ICH6RW/ICH6-M) */ +static const struct pci_driver i82801fb_nic __pci_driver = { + .ops = &nic_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801FB_LAN, +}; + +/* 82801E (C-ICH) */ +static const struct pci_driver i82801e_nic1 __pci_driver = { + .ops = &nic_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801E_LAN1, +}; + +static const struct pci_driver i82801e_nic2 __pci_driver = { + .ops = &nic_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801E_LAN2, +}; + diff --git a/src/southbridge/intel/i82801bx/i82801bx_pci.c b/src/southbridge/intel/i82801bx/i82801bx_pci.c new file mode 100644 index 0000000000..1f01e5dc46 --- /dev/null +++ b/src/southbridge/intel/i82801bx/i82801bx_pci.c @@ -0,0 +1,72 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2005 Tyan Computer + * (Written by Yinghai Lu <yinghailu@gmail.com> for Tyan Computer) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> + +static void pci_init(struct device *dev) +{ + uint16_t reg16; + + /* Clear system errors */ + reg16 = pci_read_config16(dev, 0x06); + reg16 |= 0xf900; /* Clear possible errors */ + pci_write_config16(dev, 0x06, reg16); + + reg16 = pci_read_config16(dev, 0x1e); + reg16 |= 0xf800; /* Clear possible errors */ + pci_write_config16(dev, 0x1e, reg16); +} + +static struct device_operations pci_ops = { + .read_resources = pci_bus_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_bus_enable_resources, + .init = pci_init, + .scan_bus = pci_scan_bridge, +}; + +static const struct pci_driver i82801aa_pci __pci_driver = { + .ops = &pci_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x2418, +}; + +static const struct pci_driver i82801ab_pci __pci_driver = { + .ops = &pci_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x2428, +}; + +/* 82801BA, 82801CA, 82801DB, 82801EB, and 82801ER */ +static const struct pci_driver i82801misc_pci __pci_driver = { + .ops = &pci_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x244e, +}; + +static const struct pci_driver i82801dbm_pci __pci_driver = { + .ops = &pci_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x2448, +}; diff --git a/src/southbridge/intel/i82801bx/i82801bx_reset.c b/src/southbridge/intel/i82801bx/i82801bx_reset.c new file mode 100644 index 0000000000..239a727968 --- /dev/null +++ b/src/southbridge/intel/i82801bx/i82801bx_reset.c @@ -0,0 +1,27 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2002 Eric Biederman <ebiederm@xmission.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/io.h> + +void hard_reset(void) +{ + /* Try rebooting through port 0xcf9. */ + outb((1 << 2) | (1 << 1), 0xcf9); +} diff --git a/src/southbridge/intel/i82801bx/i82801bx_sata.c b/src/southbridge/intel/i82801bx/i82801bx_sata.c new file mode 100644 index 0000000000..19a892ab1b --- /dev/null +++ b/src/southbridge/intel/i82801bx/i82801bx_sata.c @@ -0,0 +1,82 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2005 Tyan Computer + * (Written by Yinghai Lu <yinghailu@gmail.com> for Tyan Computer) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include "i82801bx.h" + +/* TODO: Set dynamically, if the user only wants one SATA channel or none + * at all. + */ +static void sata_init(struct device *dev) +{ + /* SATA configuration */ + pci_write_config8(dev, 0x04, 0x07); + pci_write_config8(dev, 0x09, 0x8f); + + /* Set timmings */ + pci_write_config16(dev, 0x40, 0x0a307); + pci_write_config16(dev, 0x42, 0x0a307); + + /* Sync DMA */ + pci_write_config16(dev, 0x48, 0x000f); + pci_write_config16(dev, 0x4a, 0x1111); + + /* 66 MHz */ + pci_write_config16(dev, 0x54, 0xf00f); + + /* Combine IDE - SATA configuration */ + pci_write_config8(dev, 0x90, 0x0); + + /* Port 0 & 1 enable */ + pci_write_config8(dev, 0x92, 0x33); + + /* Initialize SATA. */ + pci_write_config16(dev, 0xa0, 0x0018); + pci_write_config32(dev, 0xa4, 0x00000264); + pci_write_config16(dev, 0xa0, 0x0040); + pci_write_config32(dev, 0xa4, 0x00220043); +} + +static struct device_operations sata_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = sata_init, + .scan_bus = 0, + .enable = i82801bx_enable, +}; + +/* 82801EB */ +static const struct pci_driver i82801eb_sata_driver __pci_driver = { + .ops = &sata_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x24d1, +}; + +/* 82801ER */ +static const struct pci_driver i82801er_sata_driver __pci_driver = { + .ops = &sata_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x24df, +}; diff --git a/src/southbridge/intel/i82801bx/i82801bx_smbus.c b/src/southbridge/intel/i82801bx/i82801bx_smbus.c new file mode 100644 index 0000000000..8a5476f494 --- /dev/null +++ b/src/southbridge/intel/i82801bx/i82801bx_smbus.c @@ -0,0 +1,109 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* TODO: Check datasheets if this will work for all ICH* southbridges. */ + +#include <stdint.h> +#include <smbus.h> +#include <pci.h> +#include <arch/io.h> +#include "i82801bx.h" +#include "i82801_smbus.h" + +static int smbus_read_byte(struct bus *bus, device_t dev, u8 address) +{ + unsigned device; /* TODO: u16? */ + struct resource *res; + + device = dev->path.i2c.device; + res = find_resource(bus->dev, 0x20); + + return do_smbus_read_byte(res->base, device, address); +} + +static struct smbus_bus_operations lops_smbus_bus = { + .read_byte = smbus_read_byte, +}; + +static const struct device_operations smbus_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = 0, + .scan_bus = scan_static_bus, + .enable = i82801er_enable, + .ops_smbus_bus = &lops_smbus_bus, +}; + +/* 82801AA (ICH) */ +static const struct pci_driver i82801aa_smb __pci_driver = { + .ops = &smbus_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801AA_SMB, +}; + +/* 82801AB (ICH0) */ +static const struct pci_driver i82801ab_smb __pci_driver = { + .ops = &smbus_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801AB_SMB, +}; + +/* 82801BA/BAM (ICH2/ICH2-M) */ +static const struct pci_driver i82801ba_smb __pci_driver = { + .ops = &smbus_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801BA_SMB, +}; + +/* 82801CA/CAM (ICH3-S/ICH3-M) */ +static const struct pci_driver i82801ca_smb __pci_driver = { + .ops = &smbus_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801CA_SMB, +}; + +/* 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) */ +static const struct pci_driver i82801db_smb __pci_driver = { + .ops = &smbus_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801DB_SMB, +}; + +/* 82801EB/ER (ICH5/ICH5R) */ +static const struct pci_driver i82801eb_smb __pci_driver = { + .ops = &smbus_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801EB_SMB, +}; + +/* 82801FB/FR/FW/FRW/FBM (ICH6/ICH6R/ICH6W/ICH6RW/ICH6-M) */ +static const struct pci_driver i82801fb_smb __pci_driver = { + .ops = &smbus_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801FB_SMB, +}; + +/* 82801E (C-ICH) */ +static const struct pci_driver i82801e_smb __pci_driver = { + .ops = &smbus_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801E_SMB, +}; diff --git a/src/southbridge/intel/i82801bx/i82801bx_smbus.h b/src/southbridge/intel/i82801bx/i82801bx_smbus.h new file mode 100644 index 0000000000..7a7850835b --- /dev/null +++ b/src/southbridge/intel/i82801bx/i82801bx_smbus.h @@ -0,0 +1,183 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/smbus_def.h> + +static void smbus_delay(void) +{ + inb(0x80); +} + +static int smbus_wait_until_ready(void) +{ + unsigned loops = SMBUS_TIMEOUT; + unsigned char byte; + do { + smbus_delay(); + if (--loops == 0) + break; + byte = inb(SMBUS_IO_BASE + SMBHSTSTAT); + } while (byte & 1); + return loops ? 0 : -1; +} + +static int smbus_wait_until_done(void) +{ + unsigned loops = SMBUS_TIMEOUT; + unsigned char byte; + do { + smbus_delay(); + if (--loops == 0) + break; + byte = inb(SMBUS_IO_BASE + SMBHSTSTAT); + } while ((byte & 1) || (byte & ~((1 << 6) | (1 << 0))) == 0); + return loops ? 0 : -1; +} + +static int smbus_wait_until_blk_done(void) +{ + unsigned loops = SMBUS_TIMEOUT; + unsigned char byte; + do { + smbus_delay(); + if (--loops == 0) + break; + byte = inb(SMBUS_IO_BASE + SMBHSTSTAT); + } while ((byte & (1 << 7)) == 0); + return loops ? 0 : -1; +} + +static int do_smbus_read_byte(unsigned device, unsigned address) +{ + unsigned char global_status_register; + unsigned char byte; + + if (smbus_wait_until_ready() < 0) { + return SMBUS_WAIT_UNTIL_READY_TIMEOUT; + } + /* Setup transaction */ + /* Disable interrupts */ + outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL); + /* Set the device I'm talking too */ + outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBXMITADD); + /* Set the command/address... */ + outb(address & 0xff, SMBUS_IO_BASE + SMBHSTCMD); + /* Set up for a byte data read */ + outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xe3) | (0x2 << 2), + (SMBUS_IO_BASE + SMBHSTCTL)); + /* Clear any lingering errors, so the transaction will run */ + outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); + + /* Clear the data byte... */ + outb(0, SMBUS_IO_BASE + SMBHSTDAT0); + + /* Start the command */ + outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40), + SMBUS_IO_BASE + SMBHSTCTL); + + /* Poll for transaction completion */ + if (smbus_wait_until_done() < 0) { + return SMBUS_WAIT_UNTIL_DONE_TIMEOUT; + } + + global_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT); + + /* Ignore the "In Use" status... */ + global_status_register &= ~(3 << 5); + + /* Read results of transaction */ + byte = inb(SMBUS_IO_BASE + SMBHSTDAT0); + if (global_status_register != (1 << 1)) { + return SMBUS_ERROR; + } + return byte; +} + +/* This function is neither used nor tested by me (Corey Osgood), the author +(Yinghai) probably tested/used it on i82801er */ +static int do_smbus_write_block(unsigned device, unsigned length, unsigned cmd, + unsigned data1, unsigned data2) +{ +#warning "do_smbus_write_block is commented out" + print_err("Untested smbus_write_block called\r\n"); +#if 0 + unsigned char global_control_register; + unsigned char global_status_register; + unsigned char byte; + unsigned char stat; + int i; + + /* Clear the PM timeout flags, SECOND_TO_STS */ + outw(inw(0x0400 + 0x66), 0x0400 + 0x66); + + if (smbus_wait_until_ready(SMBUS_IO_BASE) < 0) { + return -2; + } + + /* Setup transaction */ + /* Obtain ownership */ + outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); + for (stat = 0; (stat & 0x40) == 0;) { + stat = inb(SMBUS_IO_BASE + SMBHSTSTAT); + } + /* Clear the done bit */ + outb(0x80, SMBUS_IO_BASE + SMBHSTSTAT); + /* Disable interrupts */ + outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL); + + /* Set the device I'm talking too */ + outb(((device & 0x7f) << 1), SMBUS_IO_BASE + SMBXMITADD); + + /* Set the command address */ + outb(cmd & 0xff, SMBUS_IO_BASE + SMBHSTCMD); + + /* Set the block length */ + outb(length & 0xff, SMBUS_IO_BASE + SMBHSTDAT0); + + /* Try sending out the first byte of data here */ + byte = (data1 >> (0)) & 0x0ff; + outb(byte, SMBUS_IO_BASE + SMBBLKDAT); + /* Issue a block write command */ + outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xe3) | (0x5 << 2) | 0x40, + SMBUS_IO_BASE + SMBHSTCTL); + + for (i = 0; i < length; i++) { + + /* Poll for transaction completion */ + if (smbus_wait_until_blk_done(SMBUS_IO_BASE) < 0) { + return -3; + } + + /* Load the next byte */ + if (i > 3) + byte = (data2 >> (i % 4)) & 0x0ff; + else + byte = (data1 >> (i)) & 0x0ff; + outb(byte, SMBUS_IO_BASE + SMBBLKDAT); + + /* Clear the done bit */ + outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), + SMBUS_IO_BASE + SMBHSTSTAT); + } + + print_debug("SMBUS Block complete\r\n"); + return 0; +#endif +} diff --git a/src/southbridge/intel/i82801bx/i82801bx_usb.c b/src/southbridge/intel/i82801bx/i82801bx_usb.c new file mode 100644 index 0000000000..721f5bf155 --- /dev/null +++ b/src/southbridge/intel/i82801bx/i82801bx_usb.c @@ -0,0 +1,163 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Corey Osgood <corey.osgood@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This code should work for all ICH* southbridges with USB. */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include "i82801bx.h" + +static void usb_init(struct device *dev) +{ + /* TODO: Any init needed? Some ports have it, others don't. */ +} + +static struct device_operations usb_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = usb_init, + .scan_bus = 0, + .enable = i82801bx_enable, +}; + +/* 82801AA (ICH) */ +static const struct pci_driver i82801aa_usb1 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801AA_USB, +}; + +/* 82801AB (ICH0) */ +static const struct pci_driver i82801ab_usb1 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801AB_USB, +}; + +/* 82801BA/BAM (ICH2/ICH2-M) */ +static const struct pci_driver i82801ba_usb1 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801BA_USB1, +}; + +static const struct pci_driver i82801ba_usb2 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801BA_USB2, +}; + +/* 82801CA/CAM (ICH3-S/ICH3-M) */ +static const struct pci_driver i82801ca_usb1 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801CA_USB1, +}; + +static const struct pci_driver i82801ca_usb2 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801CA_USB2, +}; + +static const struct pci_driver i82801ca_usb3 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801CA_USB3, +}; + +/* 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) */ +static const struct pci_driver i82801db_usb1 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801DB_USB1, +}; + +static const struct pci_driver i82801db_usb2 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801DB_USB2, +}; + +static const struct pci_driver i82801db_usb3 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801DB_USB3, +}; + +/* 82801EB/ER (ICH5/ICH5R) */ +static const struct pci_driver i82801eb_usb1 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801EB_USB1, +}; + +static const struct pci_driver i82801eb_usb2 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801EB_USB2, +}; + +static const struct pci_driver i82801eb_usb3 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801EB_USB3, +}; + +static const struct pci_driver i82801eb_usb4 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801EB_USB4, +}; + +/* 82801FB/FR/FW/FRW/FBM (ICH6/ICH6R/ICH6W/ICH6RW/ICH6-M) */ +static const struct pci_driver i82801fb_usb1 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801FB_USB1, +}; + +static const struct pci_driver i82801fb_usb2 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801FB_USB2, +}; + +static const struct pci_driver i82801fb_usb3 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801FB_USB3, +}; + +static const struct pci_driver i82801fb_usb4 __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801FB_USB4, +}; + +/* 82801E (C-ICH) */ +static const struct pci_driver i82801e_usb __pci_driver = { + .ops = &usb_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82801E_USB, +}; diff --git a/src/southbridge/intel/i82801bx/i82801bx_usb_ehci.c b/src/southbridge/intel/i82801bx/i82801bx_usb_ehci.c new file mode 100644 index 0000000000..1e885e920d --- /dev/null +++ b/src/southbridge/intel/i82801bx/i82801bx_usb_ehci.c @@ -0,0 +1,84 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2005 Tyan Computer + * (Written by Yinghai Lu <yinghailu@gmail.com> for Tyan Computer> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include "i82801bx.h" + +static void usb_ehci_init(struct device *dev) +{ + /* TODO: Is any special init really needed? */ + uint32_t cmd; + + printk_debug("EHCI: Setting up controller.. "); + cmd = pci_read_config32(dev, PCI_COMMAND); + pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); + + printk_debug("done.\n"); +} + +static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, + unsigned device) +{ + uint8_t access_cntl; + + access_cntl = pci_read_config8(dev, 0x80); + + /* Enable writes to protected registers. */ + pci_write_config8(dev, 0x80, access_cntl | 1); + + /* Write the subsystem vendor and device ID. */ + pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, + ((device & 0xffff) << 16) | (vendor & 0xffff)); + + /* Restore protection. */ + pci_write_config8(dev, 0x80, access_cntl); +} + +static struct pci_operations lops_pci = { + .set_subsystem = &usb_ehci_set_subsystem, +}; + +static struct device_operations usb_ehci_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = usb_ehci_init, + .scan_bus = 0, + .enable = i82801bx_enable, + .ops_pci = &lops_pci, +}; + +/* 82801DB and 82801DBM */ +static const struct pci_driver i82801db_usb_ehci __pci_driver = { + .ops = &usb_ehci_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x24cd, +}; + +/* 82801EB and 82801ER */ +static const struct pci_driver i82801ex_usb_ehci __pci_driver = { + .ops = &usb_ehci_ops, + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x24dd, +}; diff --git a/src/southbridge/intel/i82801bx/i82801bx_watchdog.c b/src/southbridge/intel/i82801bx/i82801bx_watchdog.c new file mode 100644 index 0000000000..aea10e1c7b --- /dev/null +++ b/src/southbridge/intel/i82801bx/i82801bx_watchdog.c @@ -0,0 +1,54 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 John Dufresne <jon.dufresne@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/io.h> +#include <device/device.h> +#include <device/pci.h> + +/* TODO: I'm fairly sure the same functionality is provided elsewhere. */ + +void watchdog_off(void) +{ + device_t dev; + unsigned long value, base; + + /* Turn off the ICH5 watchdog. */ + dev = dev_find_slot(0, PCI_DEVFN(0x1f, 0)); + + /* Enable I/O space. */ + value = pci_read_config16(dev, 0x04); + value |= (1 << 10); + pci_write_config16(dev, 0x04, value); + + /* Get TCO base. */ + base = (pci_read_config32(dev, 0x40) & 0x0fffe) + 0x60; + + /* Disable the watchdog timer. */ + value = inw(base + 0x08); + value |= 1 << 11; + outw(value, base + 0x08); + + /* Clear TCO timeout status. */ + outw(0x0008, base + 0x04); + outw(0x0002, base + 0x06); + + printk_debug("ICH Watchdog disabled\r\n"); +} diff --git a/src/southbridge/intel/i82801ca/Kconfig b/src/southbridge/intel/i82801ca/Kconfig deleted file mode 100644 index c5404e909c..0000000000 --- a/src/southbridge/intel/i82801ca/Kconfig +++ /dev/null @@ -1,2 +0,0 @@ -config SOUTHBRIDGE_INTEL_I82801CA - bool diff --git a/src/southbridge/intel/i82801ca/Makefile.inc b/src/southbridge/intel/i82801ca/Makefile.inc deleted file mode 100644 index 587b06780c..0000000000 --- a/src/southbridge/intel/i82801ca/Makefile.inc +++ /dev/null @@ -1,8 +0,0 @@ -driver-y += i82801ca.o -driver-y += i82801ca_usb.o -driver-y += i82801ca_lpc.o -driver-y += i82801ca_ide.o -driver-y += i82801ca_ac97.o -#driver-y += i82801ca_nic.o -driver-y += i82801ca_pci.o -obj-y += i82801ca_reset.o diff --git a/src/southbridge/intel/i82801ca/chip.h b/src/southbridge/intel/i82801ca/chip.h deleted file mode 100644 index f9583ca1fd..0000000000 --- a/src/southbridge/intel/i82801ca/chip.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef I82801CA_CHIP_H -#define I82801CA_CHIP_H - -struct southbridge_intel_i82801ca_config -{ -}; -extern struct chip_operations southbridge_intel_i82801ca_ops; - -#endif /* I82801CA_CHIP_H */ diff --git a/src/southbridge/intel/i82801cx/Kconfig b/src/southbridge/intel/i82801cx/Kconfig new file mode 100644 index 0000000000..a0c775d31e --- /dev/null +++ b/src/southbridge/intel/i82801cx/Kconfig @@ -0,0 +1,2 @@ +config SOUTHBRIDGE_INTEL_I82801CX + bool diff --git a/src/southbridge/intel/i82801cx/Makefile.inc b/src/southbridge/intel/i82801cx/Makefile.inc new file mode 100644 index 0000000000..163c0726cb --- /dev/null +++ b/src/southbridge/intel/i82801cx/Makefile.inc @@ -0,0 +1,8 @@ +driver-y += i82801cx.o +driver-y += i82801cx_usb.o +driver-y += i82801cx_lpc.o +driver-y += i82801cx_ide.o +driver-y += i82801cx_ac97.o +#driver-y += i82801cx_nic.o +driver-y += i82801cx_pci.o +obj-y += i82801cx_reset.o diff --git a/src/southbridge/intel/i82801cx/chip.h b/src/southbridge/intel/i82801cx/chip.h new file mode 100644 index 0000000000..99b069e82d --- /dev/null +++ b/src/southbridge/intel/i82801cx/chip.h @@ -0,0 +1,9 @@ +#ifndef I82801CX_CHIP_H +#define I82801CX_CHIP_H + +struct southbridge_intel_i82801cx_config +{ +}; +extern struct chip_operations southbridge_intel_i82801cx_ops; + +#endif /* I82801CX_CHIP_H */ diff --git a/src/southbridge/intel/i82801ca/cmos_failover.c b/src/southbridge/intel/i82801cx/cmos_failover.c index bf35764c19..ab1816fbd8 100644 --- a/src/southbridge/intel/i82801ca/cmos_failover.c +++ b/src/southbridge/intel/i82801cx/cmos_failover.c @@ -1,6 +1,6 @@ //kind of cmos_err for ich3 -#include "i82801ca.h" +#include "i82801cx.h" static void check_cmos_failed(void) { diff --git a/src/southbridge/intel/i82801ca/i82801ca.c b/src/southbridge/intel/i82801cx/i82801cx.c index 23a64f7104..ddbbc7da37 100644 --- a/src/southbridge/intel/i82801ca/i82801ca.c +++ b/src/southbridge/intel/i82801cx/i82801cx.c @@ -3,9 +3,9 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <assert.h> -#include "i82801ca.h" +#include "i82801cx.h" -void i82801ca_enable(device_t dev) +void i82801cx_enable(device_t dev) { unsigned int index = 0; uint8_t bHasDisableBit = 0; @@ -47,7 +47,7 @@ void i82801ca_enable(device_t dev) } } -struct chip_operations southbridge_intel_i82801ca_ops = { - CHIP_NAME("Intel 82801CA Southbridge") - .enable_dev = i82801ca_enable, +struct chip_operations southbridge_intel_i82801cx_ops = { + CHIP_NAME("Intel ICH3 (82801Cx) Series Southbridge") + .enable_dev = i82801cx_enable, }; diff --git a/src/southbridge/intel/i82801ca/i82801ca.h b/src/southbridge/intel/i82801cx/i82801cx.h index a761056bff..b9b3511a4a 100644 --- a/src/southbridge/intel/i82801ca/i82801ca.h +++ b/src/southbridge/intel/i82801cx/i82801cx.h @@ -1,9 +1,9 @@ -#ifndef I82801CA_H -#define I82801CA_H +#ifndef I82801CX_H +#define I82801CX_H #if !defined( __ROMCC__ ) && !defined(__PRE_RAM__) #include "chip.h" -extern void i82801ca_enable(device_t dev); +extern void i82801cx_enable(device_t dev); #endif @@ -75,4 +75,4 @@ extern void i82801ca_enable(device_t dev); */ #define SMBUS_TIMEOUT (100*1000) -#endif /* I82801CA_H */ +#endif /* I82801CX_H */ diff --git a/src/southbridge/intel/i82801ca/i82801ca_ac97.c b/src/southbridge/intel/i82801cx/i82801cx_ac97.c index 7e03cc382e..5de44fc382 100644 --- a/src/southbridge/intel/i82801ca/i82801ca_ac97.c +++ b/src/southbridge/intel/i82801cx/i82801cx_ac97.c @@ -6,14 +6,14 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801ca.h" +#include "i82801cx.h" static struct device_operations ac97audio_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, - .enable = i82801ca_enable, + .enable = i82801cx_enable, .init = 0, .scan_bus = 0, }; @@ -29,7 +29,7 @@ static struct device_operations ac97modem_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, - .enable = i82801ca_enable, + .enable = i82801cx_enable, .init = 0, .scan_bus = 0, }; diff --git a/src/southbridge/intel/i82801ca/i82801ca_early_smbus.c b/src/southbridge/intel/i82801cx/i82801cx_early_smbus.c index d33e40484c..9c3480283c 100644 --- a/src/southbridge/intel/i82801ca/i82801ca_early_smbus.c +++ b/src/southbridge/intel/i82801cx/i82801cx_early_smbus.c @@ -1,5 +1,5 @@ #include <device/pci_ids.h> -#include "i82801ca.h" +#include "i82801cx.h" static void enable_smbus(void) { diff --git a/src/southbridge/intel/i82801ca/i82801ca_ide.c b/src/southbridge/intel/i82801cx/i82801cx_ide.c index d1a19c77aa..2506b2f329 100644 --- a/src/southbridge/intel/i82801ca/i82801ca_ide.c +++ b/src/southbridge/intel/i82801cx/i82801cx_ide.c @@ -3,7 +3,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801ca.h" +#include "i82801cx.h" static void ide_init(struct device *dev) @@ -38,7 +38,7 @@ static struct device_operations ide_ops = { .enable_resources = pci_dev_enable_resources, .init = ide_init, .scan_bus = 0, - .enable = i82801ca_enable, + .enable = i82801cx_enable, }; static const struct pci_driver ide_driver __pci_driver = { diff --git a/src/southbridge/intel/i82801ca/i82801ca_lpc.c b/src/southbridge/intel/i82801cx/i82801cx_lpc.c index fd16fef9b1..4785242a79 100644 --- a/src/southbridge/intel/i82801ca/i82801ca_lpc.c +++ b/src/southbridge/intel/i82801cx/i82801cx_lpc.c @@ -11,7 +11,7 @@ #include <pc80/mc146818rtc.h> #include <pc80/isa-dma.h> #include <arch/io.h> -#include "i82801ca.h" +#include "i82801cx.h" #define NMI_OFF 0 @@ -23,7 +23,7 @@ #define MAINBOARD_POWER_ON 1 -void i82801ca_enable_ioapic( struct device *dev) +void i82801cx_enable_ioapic( struct device *dev) { uint32_t dword; volatile uint32_t* ioapic_index = (volatile uint32_t*)0xfec00000; @@ -54,14 +54,14 @@ void i82801ca_enable_ioapic( struct device *dev) } // This is how interrupts are received from the Super I/O chip -void i82801ca_enable_serial_irqs( struct device *dev) +void i82801cx_enable_serial_irqs( struct device *dev) { // Recognize serial IRQs, continuous mode, frame size 21, 4 clock start frame pulse width pci_write_config8(dev, SERIRQ_CNTL, (1 << 7)|(1 << 6)|((21 - 17) << 2)|(0<< 0)); } //---------------------------------------------------------------------------------- -// Function: i82801ca_lpc_route_dma +// Function: i82801cx_lpc_route_dma // Parameters: dev // mask - identifies whether each channel should be used for PCI DMA // (bit = 0) or LPC DMA (bit = 1). The LSb controls channel 0. @@ -69,7 +69,7 @@ void i82801ca_enable_serial_irqs( struct device *dev) // Return Value: None // Description: Route all DMA channels to either PCI or LPC. // -void i82801ca_lpc_route_dma( struct device *dev, uint8_t mask) +void i82801cx_lpc_route_dma( struct device *dev, uint8_t mask) { uint16_t dmaConfig; int channelIndex; @@ -84,7 +84,7 @@ void i82801ca_lpc_route_dma( struct device *dev, uint8_t mask) pci_write_config16(dev, PCI_DMA_CFG, dmaConfig); } -void i82801ca_rtc_init(struct device *dev) +void i82801cx_rtc_init(struct device *dev) { uint32_t dword; int rtc_failed; @@ -116,7 +116,7 @@ void i82801ca_rtc_init(struct device *dev) } -void i82801ca_1f0_misc(struct device *dev) +void i82801cx_1f0_misc(struct device *dev) { // Prevent LPC disabling, enable parity errors, and SERR# (System Error) pci_write_config16(dev, PCI_COMMAND, 0x014f); @@ -161,9 +161,9 @@ static void lpc_init(struct device *dev) int nmi_option; /* IO APIC initialization */ - i82801ca_enable_ioapic(dev); + i82801cx_enable_ioapic(dev); - i82801ca_enable_serial_irqs(dev); + i82801cx_enable_serial_irqs(dev); /* power after power fail */ /* FIXME this doesn't work! */ @@ -193,17 +193,17 @@ static void lpc_init(struct device *dev) } /* Initialize the real time clock */ - i82801ca_rtc_init(dev); + i82801cx_rtc_init(dev); - i82801ca_lpc_route_dma(dev, 0xff); + i82801cx_lpc_route_dma(dev, 0xff); /* Initialize isa dma */ isa_dma_init(); - i82801ca_1f0_misc(dev); + i82801cx_1f0_misc(dev); } -static void i82801ca_lpc_read_resources(device_t dev) +static void i82801cx_lpc_read_resources(device_t dev) { struct resource *res; @@ -229,16 +229,16 @@ static void i82801ca_lpc_read_resources(device_t dev) res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } -static void i82801ca_lpc_enable_resources(device_t dev) +static void i82801cx_lpc_enable_resources(device_t dev) { pci_dev_enable_resources(dev); enable_childrens_resources(dev); } static struct device_operations lpc_ops = { - .read_resources = i82801ca_lpc_read_resources, + .read_resources = i82801cx_lpc_read_resources, .set_resources = pci_dev_set_resources, - .enable_resources = i82801ca_lpc_enable_resources, + .enable_resources = i82801cx_lpc_enable_resources, .init = lpc_init, .scan_bus = scan_static_bus, .enable = 0, diff --git a/src/southbridge/intel/i82801ca/i82801ca_nic.c b/src/southbridge/intel/i82801cx/i82801cx_nic.c index c0b01bce70..00ce038143 100644 --- a/src/southbridge/intel/i82801ca/i82801ca_nic.c +++ b/src/southbridge/intel/i82801cx/i82801cx_nic.c @@ -3,7 +3,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801ca.h" +#include "i82801cx.h" static struct device_operations nic_ops = { diff --git a/src/southbridge/intel/i82801ca/i82801ca_pci.c b/src/southbridge/intel/i82801cx/i82801cx_pci.c index 5f7b89700e..842b214fc8 100644 --- a/src/southbridge/intel/i82801ca/i82801ca_pci.c +++ b/src/southbridge/intel/i82801cx/i82801cx_pci.c @@ -3,7 +3,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801ca.h" +#include "i82801cx.h" static void pci_init(struct device *dev) { diff --git a/src/southbridge/intel/i82801ca/i82801ca_reset.c b/src/southbridge/intel/i82801cx/i82801cx_reset.c index 93ef6d9f23..20e8530c54 100644 --- a/src/southbridge/intel/i82801ca/i82801ca_reset.c +++ b/src/southbridge/intel/i82801cx/i82801cx_reset.c @@ -1,6 +1,6 @@ #include <arch/io.h> -void i82801ca_hard_reset(void) +void i82801cx_hard_reset(void) { /* Try rebooting through port 0xcf9 */ // Hard reset without power cycle diff --git a/src/southbridge/intel/i82801ca/i82801ca_smbus.c b/src/southbridge/intel/i82801cx/i82801cx_smbus.c index 0eceba7103..b69bbc1d9d 100644 --- a/src/southbridge/intel/i82801ca/i82801ca_smbus.c +++ b/src/southbridge/intel/i82801cx/i82801cx_smbus.c @@ -1,7 +1,7 @@ #include <smbus.h> #include <pci.h> #include <arch/io.h> -#include "i82801ca.h" +#include "i82801cx.h" #define PM_BUS 0 #define PM_DEVFN PCI_DEVFN(0x1f,3) diff --git a/src/southbridge/intel/i82801ca/i82801ca_usb.c b/src/southbridge/intel/i82801cx/i82801cx_usb.c index 7e7c058b46..258581a78b 100644 --- a/src/southbridge/intel/i82801ca/i82801ca_usb.c +++ b/src/southbridge/intel/i82801cx/i82801cx_usb.c @@ -3,7 +3,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801ca.h" +#include "i82801cx.h" static void usb_init(struct device *dev) { @@ -28,7 +28,7 @@ static struct device_operations usb_ops = { .enable_resources = pci_dev_enable_resources, .init = usb_init, .scan_bus = 0, - .enable = i82801ca_enable, + .enable = i82801cx_enable, }; static const struct pci_driver usb_driver_1 __pci_driver = { diff --git a/src/southbridge/intel/i82801dbm/Kconfig b/src/southbridge/intel/i82801dbm/Kconfig deleted file mode 100644 index 3433d598e4..0000000000 --- a/src/southbridge/intel/i82801dbm/Kconfig +++ /dev/null @@ -1,2 +0,0 @@ -config SOUTHBRIDGE_INTEL_I82801DBM - bool diff --git a/src/southbridge/intel/i82801dbm/Makefile.inc b/src/southbridge/intel/i82801dbm/Makefile.inc deleted file mode 100644 index 713427971c..0000000000 --- a/src/southbridge/intel/i82801dbm/Makefile.inc +++ /dev/null @@ -1,9 +0,0 @@ -driver-y += i82801dbm.o -driver-y += i82801dbm_usb.o -driver-y += i82801dbm_lpc.o -driver-y += i82801dbm_ide.o -driver-y += i82801dbm_usb2.o -driver-y += i82801dbm_ac97.o -#driver-y += i82801dbm_nic.o -#driver-y += i82801dbm_pci.o -obj-y += i82801dbm_reset.o diff --git a/src/southbridge/intel/i82801dbm/chip.h b/src/southbridge/intel/i82801dbm/chip.h deleted file mode 100644 index e1e3da0e6f..0000000000 --- a/src/southbridge/intel/i82801dbm/chip.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef I82801DBM_CHIP_H -#define I82801DBM_CHIP_H - -struct southbridge_intel_i82801dbm_config -{ - int enable_usb; - int enable_native_ide; -}; -struct chip_operations; -extern struct chip_operations southbridge_intel_i82801dbm_ops; - -#endif /* I82801DBM_CHIP_H */ diff --git a/src/southbridge/intel/i82801dbm/i82801dbm.h b/src/southbridge/intel/i82801dbm/i82801dbm.h deleted file mode 100644 index 824d23a0b6..0000000000 --- a/src/southbridge/intel/i82801dbm/i82801dbm.h +++ /dev/null @@ -1,81 +0,0 @@ -/* the problem: we have 82801dbm support in fb1, and 82801er in fb2. - * fb1 code is what we want, fb2 structure is needed however. - * so we need to get fb1 code for 82801dbm into fb2 structure. - */ -/* What I did: took the 80801er stuff from fb2, verify it against the - * db stuff in fb1, and made sure it was right. - */ - -#ifndef I82801DBM_H -#define I82801DBM_H - -#include "chip.h" -extern void i82801dbm_enable(device_t dev); - -/* -000 = Non-combined. P0 is primary master. P1 is secondary master. -001 = Non-combined. P0 is secondary master. P1 is primary master. -100 = Combined. P0 is primary master. P1 is primary slave. IDE is secondary; Primary IDE channel -disabled. -101 = Combined. P0 is primary slave. P1 is primary master. IDE is secondary. -110 = Combined. IDE is primary. P0 is secondary master. P1 is secondary slave; Secondary IDE -channel disabled. -111 = Combined. IDE is primary. P0 is secondary slave. P1 is secondary master. -*/ - -#define PCI_DMA_CFG 0x90 -#define SERIRQ_CNTL 0x64 -#define GEN_CNTL 0xd0 -#define GEN_STS 0xd4 -#define RTC_CONF 0xd8 -#define GEN_PMCON_3 0xa4 - -#define PCICMD 0x04 -#define PMBASE 0x40 -#define ACPI_CNTL 0x44 -#define BIOS_CNTL 0x4E -#define GPIO_BASE 0x58 -#define GPIO_CNTL 0x5C -#define PIRQA_ROUT 0x60 -#define PIRQE_ROUT 0x68 -#define COM_DEC 0xE0 -#define LPC_EN 0xE6 -#define FUNC_DIS 0xF2 - -/* 1e f0 244e */ - -#define CMD 0x04 -#define SBUS_NUM 0x19 -#define SUB_BUS_NUM 0x1A -#define SMLT 0x1B -#define IOBASE 0x1C -#define IOLIM 0x1D -#define MEMBASE 0x20 -#define MEMLIM 0x22 -#define CNF 0x50 -#define MTT 0x70 -#define PCI_MAST_STS 0x82 - -#define RTC_FAILED (1 <<2) - - -#define SMBUS_IO_BASE 0x1000 - -#define SMBHSTSTAT 0x0 -#define SMBHSTCTL 0x2 -#define SMBHSTCMD 0x3 -#define SMBXMITADD 0x4 -#define SMBHSTDAT0 0x5 -#define SMBHSTDAT1 0x6 -#define SMBBLKDAT 0x7 -#define SMBTRNSADD 0x9 -#define SMBSLVDATA 0xa -#define SMLINK_PIN_CTL 0xe -#define SMBUS_PIN_CTL 0xf - -/* Between 1-10 seconds, We should never timeout normally - * Longer than this is just painful when a timeout condition occurs. - */ -#define SMBUS_TIMEOUT (100*1000) - -#endif /* I82801DBM_H */ diff --git a/src/southbridge/intel/i82801dx/Kconfig b/src/southbridge/intel/i82801dx/Kconfig new file mode 100644 index 0000000000..6a35691b5d --- /dev/null +++ b/src/southbridge/intel/i82801dx/Kconfig @@ -0,0 +1,2 @@ +config SOUTHBRIDGE_INTEL_I82801DX + bool diff --git a/src/southbridge/intel/i82801dx/Makefile.inc b/src/southbridge/intel/i82801dx/Makefile.inc new file mode 100644 index 0000000000..7167e1d391 --- /dev/null +++ b/src/southbridge/intel/i82801dx/Makefile.inc @@ -0,0 +1,9 @@ +driver-y += i82801dx.o +driver-y += i82801dx_usb.o +driver-y += i82801dx_lpc.o +driver-y += i82801dx_ide.o +driver-y += i82801dx_usb2.o +driver-y += i82801dx_ac97.o +#driver-y += i82801dx_nic.o +#driver-y += i82801dx_pci.o +obj-y += i82801dx_reset.o diff --git a/src/southbridge/intel/i82801dx/chip.h b/src/southbridge/intel/i82801dx/chip.h new file mode 100644 index 0000000000..fdbb7d2d0d --- /dev/null +++ b/src/southbridge/intel/i82801dx/chip.h @@ -0,0 +1,27 @@ +#ifndef I82801DX_CHIP_H +#define I82801DX_CHIP_H + +struct southbridge_intel_i82801dx_config +{ + int enable_usb; + int enable_native_ide; + /** + * Interrupt Routing configuration + * If bit7 is 1, the interrupt is disabled. + */ + uint8_t pirqa_routing; + uint8_t pirqb_routing; + uint8_t pirqc_routing; + uint8_t pirqd_routing; + uint8_t pirqe_routing; + uint8_t pirqf_routing; + uint8_t pirqg_routing; + uint8_t pirqh_routing; + + uint8_t ide0_enable; + uint8_t ide1_enable; +}; + +extern struct chip_operations southbridge_intel_i82801dx_ops; + +#endif /* I82801DBM_CHIP_H */ diff --git a/src/southbridge/intel/i82801dbm/cmos_failover.c b/src/southbridge/intel/i82801dx/cmos_failover.c index 4821fad3d2..4821fad3d2 100644 --- a/src/southbridge/intel/i82801dbm/cmos_failover.c +++ b/src/southbridge/intel/i82801dx/cmos_failover.c diff --git a/src/southbridge/intel/i82801dbm/i82801dbm.c b/src/southbridge/intel/i82801dx/i82801dx.c index 157ffcac1e..abfd8c21cf 100644 --- a/src/southbridge/intel/i82801dbm/i82801dbm.c +++ b/src/southbridge/intel/i82801dx/i82801dx.c @@ -2,9 +2,9 @@ #include <device/device.h> #include <device/pci.h> #include <device/pci_ids.h> -#include "i82801dbm.h" +#include "i82801dx.h" -void i82801dbm_enable(device_t dev) +void i82801dx_enable(device_t dev) { unsigned int index = 0; uint8_t bHasDisableBit = 0; @@ -59,7 +59,7 @@ void i82801dbm_enable(device_t dev) } } -struct chip_operations southbridge_intel_i82801dbm_ops = { - CHIP_NAME("Intel 82801DBM Southbridge") - .enable_dev = i82801dbm_enable, +struct chip_operations southbridge_intel_i82801dx_ops = { + CHIP_NAME("Intel ICH4/ICH4-M (82801Dx) Series Southbridge") + .enable_dev = i82801dx_enable, }; diff --git a/src/southbridge/intel/i82801dx/i82801dx.h b/src/southbridge/intel/i82801dx/i82801dx.h new file mode 100644 index 0000000000..d4e1aa0928 --- /dev/null +++ b/src/southbridge/intel/i82801dx/i82801dx.h @@ -0,0 +1,163 @@ +/* the problem: we have 82801dbm support in fb1, and 82801er in fb2. + * fb1 code is what we want, fb2 structure is needed however. + * so we need to get fb1 code for 82801dbm into fb2 structure. + */ +/* What I did: took the 80801er stuff from fb2, verify it against the + * db stuff in fb1, and made sure it was right. + */ + +#ifndef I82801DX_H +#define I82801DX_H + +#if !defined( __ROMCC__ ) && !defined(__PRE_RAM__) +#include "chip.h" +extern void i82801dx_enable(device_t dev); +#endif + +#define MAINBOARD_POWER_OFF 0 +#define MAINBOARD_POWER_ON 1 +#define MAINBOARD_POWER_KEEP 2 + +#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL +#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON +#endif + +/* +000 = Non-combined. P0 is primary master. P1 is secondary master. +001 = Non-combined. P0 is secondary master. P1 is primary master. +100 = Combined. P0 is primary master. P1 is primary slave. IDE is secondary; Primary IDE channel +disabled. +101 = Combined. P0 is primary slave. P1 is primary master. IDE is secondary. +110 = Combined. IDE is primary. P0 is secondary master. P1 is secondary slave; Secondary IDE +channel disabled. +111 = Combined. IDE is primary. P0 is secondary slave. P1 is secondary master. +*/ + +#define PCI_DMA_CFG 0x90 +#define SERIRQ_CNTL 0x64 +#define GEN_CNTL 0xd0 +#define GEN_STS 0xd4 +#define RTC_CONF 0xd8 +#define GEN_PMCON_3 0xa4 + +#define PCICMD 0x04 +#define PMBASE 0x40 +#define PMBASE_ADDR 0x0400 +#define ACPI_CNTL 0x44 +#define BIOS_CNTL 0x4E +#define GPIO_BASE 0x58 +#define GPIO_CNTL 0x5C +#define PIRQA_ROUT 0x60 +#define PIRQE_ROUT 0x68 +#define COM_DEC 0xE0 +#define LPC_EN 0xE6 +#define FUNC_DIS 0xF2 + +/* 1e f0 244e */ + +#define CMD 0x04 +#define SBUS_NUM 0x19 +#define SUB_BUS_NUM 0x1A +#define SMLT 0x1B +#define IOBASE 0x1C +#define IOLIM 0x1D +#define MEMBASE 0x20 +#define MEMLIM 0x22 +#define CNF 0x50 +#define MTT 0x70 +#define PCI_MAST_STS 0x82 + +#define RTC_FAILED (1 <<2) + + +#define SMBUS_IO_BASE 0x1000 + +#define SMBHSTSTAT 0x0 +#define SMBHSTCTL 0x2 +#define SMBHSTCMD 0x3 +#define SMBXMITADD 0x4 +#define SMBHSTDAT0 0x5 +#define SMBHSTDAT1 0x6 +#define SMBBLKDAT 0x7 +#define SMBTRNSADD 0x9 +#define SMBSLVDATA 0xa +#define SMLINK_PIN_CTL 0xe +#define SMBUS_PIN_CTL 0xf + +/* Between 1-10 seconds, We should never timeout normally + * Longer than this is just painful when a timeout condition occurs. + */ +#define SMBUS_TIMEOUT (100*1000) + +#define PM1_STS 0x00 +#define WAK_STS (1 << 15) +#define PCIEXPWAK_STS (1 << 14) +#define PRBTNOR_STS (1 << 11) +#define RTC_STS (1 << 10) +#define PWRBTN_STS (1 << 8) +#define GBL_STS (1 << 5) +#define BM_STS (1 << 4) +#define TMROF_STS (1 << 0) +#define PM1_EN 0x02 +#define PCIEXPWAK_DIS (1 << 14) +#define RTC_EN (1 << 10) +#define PWRBTN_EN (1 << 8) +#define GBL_EN (1 << 5) +#define TMROF_EN (1 << 0) +#define PM1_CNT 0x04 +#define SLP_EN (1 << 13) +#define SLP_TYP (7 << 10) +#define GBL_RLS (1 << 2) +#define BM_RLD (1 << 1) +#define SCI_EN (1 << 0) +#define PM1_TMR 0x08 +#define PROC_CNT 0x10 +#define LV2 0x14 +#define LV3 0x15 +#define LV4 0x16 +#define PM2_CNT 0x20 // mobile only +#define GPE0_STS 0x28 +#define PME_B0_STS (1 << 13) +#define USB3_STS (1 << 12) +#define PME_STS (1 << 11) +#define BATLOW_STS (1 << 10) +#define GST_STS (1 << 9) +#define RI_STS (1 << 8) +#define SMB_WAK_STS (1 << 7) +#define TCOSCI_STS (1 << 6) +#define AC97_STS (1 << 5) +#define USB2_STS (1 << 4) +#define USB1_STS (1 << 3) +#define SWGPE_STS (1 << 2) +#define HOT_PLUG_STS (1 << 1) +#define THRM_STS (1 << 0) +#define GPE0_EN 0x2c +#define PME_B0_EN (1 << 13) +#define PME_EN (1 << 11) +#define SMI_EN 0x30 +#define EL_SMI_EN (1 << 25) // Intel Quick Resume Technology +#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic +#define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic +#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS +#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al) +#define MCSMI_EN (1 << 11) // Trap microcontroller range access +#define BIOS_RLS (1 << 7) // asserts SCI on bit set +#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set +#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI# +#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI# +#define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic +#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit +#define EOS (1 << 1) // End of SMI (deassert SMI#) +#define GBL_SMI_EN (1 << 0) // SMI# generation at all? +#define SMI_STS 0x34 +#define ALT_GP_SMI_EN 0x38 +#define ALT_GP_SMI_STS 0x3a +#define GPE_CNTL 0x42 +#define DEVACT_STS 0x44 +#define SS_CNT 0x50 +#define C3_RES 0x54 + +#define TCOBASE 0x60 /* TCO Base Address Register */ +#define TCO1_CNT 0x08 /* TCO1 Control Register */ + +#endif /* I82801DX_H */ diff --git a/src/southbridge/intel/i82801dbm/i82801dbm_ac97.c b/src/southbridge/intel/i82801dx/i82801dx_ac97.c index 3b364017dd..752449865d 100644 --- a/src/southbridge/intel/i82801dbm/i82801dbm_ac97.c +++ b/src/southbridge/intel/i82801dx/i82801dx_ac97.c @@ -6,14 +6,14 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801dbm.h" +#include "i82801dx.h" static struct device_operations ac97audio_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, - .enable = i82801dbm_enable, + .enable = i82801dx_enable, .init = 0, .scan_bus = 0, }; @@ -29,7 +29,7 @@ static struct device_operations ac97modem_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, - .enable = i82801dbm_enable, + .enable = i82801dx_enable, .init = 0, .scan_bus = 0, }; diff --git a/src/southbridge/intel/i82801dbm/i82801dbm_early_smbus.c b/src/southbridge/intel/i82801dx/i82801dx_early_smbus.c index a85c08b9bb..0a0ff91f34 100644 --- a/src/southbridge/intel/i82801dbm/i82801dbm_early_smbus.c +++ b/src/southbridge/intel/i82801dx/i82801dx_early_smbus.c @@ -1,6 +1,6 @@ //#define SMBUS_IO_BASE 0x1000 -#define SMBUS_IO_BASE 0x0f00 +//#define SMBUS_IO_BASE 0x0f00 #define SMBHSTSTAT 0x0 #define SMBHSTCTL 0x2 @@ -17,7 +17,7 @@ /* Between 1-10 seconds, We should never timeout normally * Longer than this is just painful when a timeout condition occurs. */ -#define SMBUS_TIMEOUT (100*1000*10) +//#define SMBUS_TIMEOUT (100*1000*10) static void enable_smbus(void) { diff --git a/src/southbridge/intel/i82801dbm/i82801dbm_ide.c b/src/southbridge/intel/i82801dx/i82801dx_ide.c index f7d799657b..bb3510783d 100644 --- a/src/southbridge/intel/i82801dbm/i82801dbm_ide.c +++ b/src/southbridge/intel/i82801dx/i82801dx_ide.c @@ -3,7 +3,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801dbm.h" +#include "i82801dx.h" static void ide_init(struct device *dev) @@ -42,7 +42,7 @@ static struct device_operations ide_ops = { .enable_resources = pci_dev_enable_resources, .init = ide_init, .scan_bus = 0, - .enable = i82801dbm_enable, + .enable = i82801dx_enable, }; static const struct pci_driver ide_driver __pci_driver = { diff --git a/src/southbridge/intel/i82801dbm/i82801dbm_lpc.c b/src/southbridge/intel/i82801dx/i82801dx_lpc.c index c461673cbf..59225d2c9a 100644 --- a/src/southbridge/intel/i82801dbm/i82801dbm_lpc.c +++ b/src/southbridge/intel/i82801dx/i82801dx_lpc.c @@ -10,13 +10,13 @@ #include <pc80/mc146818rtc.h> #include <pc80/isa-dma.h> #include <arch/io.h> -#include "i82801dbm.h" +#include "i82801dx.h" #define NMI_OFF 0 -void i82801dbm_enable_ioapic( struct device *dev) +void i82801dx_enable_ioapic( struct device *dev) { uint32_t dword; volatile uint32_t *ioapic_sba = (volatile uint32_t *)0xfec00000; @@ -46,11 +46,11 @@ void i82801dbm_enable_ioapic( struct device *dev) } -void i82801dbm_enable_serial_irqs( struct device *dev) +void i82801dx_enable_serial_irqs( struct device *dev) { pci_write_config8(dev, SERIRQ_CNTL, (1 << 7)|(1 << 6)|((21 - 17) << 2)|(0<< 0)); } -void i82801dbm_lpc_route_dma( struct device *dev, uint8_t mask) +void i82801dx_lpc_route_dma( struct device *dev, uint8_t mask) { uint16_t word; int i; @@ -63,7 +63,7 @@ void i82801dbm_lpc_route_dma( struct device *dev, uint8_t mask) } pci_write_config16(dev, PCI_DMA_CFG, word); } -void i82801dbm_rtc_init(struct device *dev) +void i82801dx_rtc_init(struct device *dev) { uint8_t byte; uint32_t dword; @@ -80,7 +80,7 @@ void i82801dbm_rtc_init(struct device *dev) } -void i82801dbm_1f0_misc(struct device *dev) +void i82801dx_1f0_misc(struct device *dev) { pci_write_config16(dev, PCICMD, 0x014f); pci_write_config32(dev, PMBASE, 0x00001001); @@ -122,9 +122,9 @@ static void lpc_init(struct device *dev) int nmi_option; /* IO APIC initialization */ - i82801dbm_enable_ioapic(dev); + i82801dx_enable_ioapic(dev); - i82801dbm_enable_serial_irqs(dev); + i82801dx_enable_serial_irqs(dev); #ifdef SUSPICIOUS_LOOKING_CODE // The ICH-4 datasheet does not mention this configuration register. @@ -166,19 +166,19 @@ static void lpc_init(struct device *dev) } /* Initialize the real time clock */ - i82801dbm_rtc_init(dev); + i82801dx_rtc_init(dev); - i82801dbm_lpc_route_dma(dev, 0xff); + i82801dx_lpc_route_dma(dev, 0xff); /* Initialize isa dma */ isa_dma_init(); - i82801dbm_1f0_misc(dev); + i82801dx_1f0_misc(dev); /* Initialize the High Precision Event Timers */ enable_hpet(dev); } -static void i82801dbm_lpc_read_resources(device_t dev) +static void i82801dx_lpc_read_resources(device_t dev) { struct resource *res; @@ -204,19 +204,19 @@ static void i82801dbm_lpc_read_resources(device_t dev) res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } -static void i82801dbm_lpc_enable_resources(device_t dev) +static void i82801dx_lpc_enable_resources(device_t dev) { pci_dev_enable_resources(dev); enable_childrens_resources(dev); } static struct device_operations lpc_ops = { - .read_resources = i82801dbm_lpc_read_resources, + .read_resources = i82801dx_lpc_read_resources, .set_resources = pci_dev_set_resources, - .enable_resources = i82801dbm_lpc_enable_resources, + .enable_resources = i82801dx_lpc_enable_resources, .init = lpc_init, .scan_bus = scan_static_bus, - .enable = i82801dbm_enable, + .enable = i82801dx_enable, }; static const struct pci_driver lpc_driver __pci_driver = { diff --git a/src/southbridge/intel/i82801dbm/i82801dbm_nic.c b/src/southbridge/intel/i82801dx/i82801dx_nic.c index e25f1bcaf7..6221ba4889 100644 --- a/src/southbridge/intel/i82801dbm/i82801dbm_nic.c +++ b/src/southbridge/intel/i82801dx/i82801dx_nic.c @@ -3,7 +3,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801dbm.h" +#include "i82801dx.h" static struct device_operations nic_ops = { diff --git a/src/southbridge/intel/i82801dbm/i82801dbm_pci.c b/src/southbridge/intel/i82801dx/i82801dx_pci.c index b69cd601c4..0c88bf2827 100644 --- a/src/southbridge/intel/i82801dbm/i82801dbm_pci.c +++ b/src/southbridge/intel/i82801dx/i82801dx_pci.c @@ -3,7 +3,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801dbm.h" +#include "i82801dx.h" static void pci_init(struct device *dev) { diff --git a/src/southbridge/intel/i82801dbm/i82801dbm_reset.c b/src/southbridge/intel/i82801dx/i82801dx_reset.c index 3d7a4b79b6..3d7a4b79b6 100644 --- a/src/southbridge/intel/i82801dbm/i82801dbm_reset.c +++ b/src/southbridge/intel/i82801dx/i82801dx_reset.c diff --git a/src/southbridge/intel/i82801dbm/i82801dbm_sata.c b/src/southbridge/intel/i82801dx/i82801dx_sata.c index 405ee0e92f..22c6cd77fd 100644 --- a/src/southbridge/intel/i82801dbm/i82801dbm_sata.c +++ b/src/southbridge/intel/i82801dx/i82801dx_sata.c @@ -3,7 +3,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801dbm.h" +#include "i82801dx.h" static void sata_init(struct device *dev) { @@ -64,7 +64,7 @@ static struct device_operations sata_ops = { .enable_resources = pci_dev_enable_resources, .init = sata_init, .scan_bus = 0, - .enable = i82801dbm_enable, + .enable = i82801dx_enable, }; static const struct pci_driver stat_driver __pci_driver = { diff --git a/src/southbridge/intel/i82801dbm/i82801dbm_smbus.c b/src/southbridge/intel/i82801dx/i82801dx_smbus.c index fd06871234..e56a67c1e0 100644 --- a/src/southbridge/intel/i82801dbm/i82801dbm_smbus.c +++ b/src/southbridge/intel/i82801dx/i82801dx_smbus.c @@ -1,3 +1,4 @@ +#include "i82801dx.h" #include <smbus.h> #include <pci.h> #include <arch/io.h> @@ -5,6 +6,7 @@ #define PM_BUS 0 #define PM_DEVFN PCI_DEVFN(0x1f,3) +#if 0 #define SMBUS_IO_BASE 0x1000 #define SMBHSTSTAT 0 #define SMBHSTCTL 2 @@ -13,6 +15,7 @@ #define SMBHSTDAT0 5 #define SMBHSTDAT1 6 #define SMBBLKDAT 7 +#endif void smbus_enable(void) { diff --git a/src/southbridge/intel/i82801dbm/i82801dbm_usb.c b/src/southbridge/intel/i82801dx/i82801dx_usb.c index 3fd61673b2..2e60193855 100644 --- a/src/southbridge/intel/i82801dbm/i82801dbm_usb.c +++ b/src/southbridge/intel/i82801dx/i82801dx_usb.c @@ -3,7 +3,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801dbm.h" +#include "i82801dx.h" static void usb_init(struct device *dev) { @@ -29,7 +29,7 @@ static struct device_operations usb_ops = { .enable_resources = pci_dev_enable_resources, .init = usb_init, .scan_bus = 0, - .enable = i82801dbm_enable, + .enable = i82801dx_enable, }; static const struct pci_driver usb_driver_1 __pci_driver = { diff --git a/src/southbridge/intel/i82801dbm/i82801dbm_usb2.c b/src/southbridge/intel/i82801dx/i82801dx_usb2.c index f05fbbb933..ca13e92995 100644 --- a/src/southbridge/intel/i82801dbm/i82801dbm_usb2.c +++ b/src/southbridge/intel/i82801dx/i82801dx_usb2.c @@ -5,7 +5,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801dbm.h" +#include "i82801dx.h" static void usb2_init(struct device *dev) { @@ -30,7 +30,7 @@ static struct device_operations usb2_ops = { .enable_resources = pci_dev_enable_resources, .init = usb2_init, .scan_bus = 0, - .enable = i82801dbm_enable, + .enable = i82801dx_enable, }; static const struct pci_driver usb2_driver __pci_driver = { diff --git a/src/southbridge/intel/i82801er/Kconfig b/src/southbridge/intel/i82801er/Kconfig deleted file mode 100644 index adb6c1d11c..0000000000 --- a/src/southbridge/intel/i82801er/Kconfig +++ /dev/null @@ -1,3 +0,0 @@ -config SOUTHBRIDGE_INTEL_I82801ER - bool - select IOAPIC diff --git a/src/southbridge/intel/i82801er/Makefile.inc b/src/southbridge/intel/i82801er/Makefile.inc deleted file mode 100644 index b2f81f8b2e..0000000000 --- a/src/southbridge/intel/i82801er/Makefile.inc +++ /dev/null @@ -1,11 +0,0 @@ -driver-y += i82801er.o -driver-y += i82801er_uhci.o -driver-y += i82801er_lpc.o -driver-y += i82801er_ide.o -driver-y += i82801er_sata.o -driver-y += i82801er_ehci.o -driver-y += i82801er_smbus.o -driver-y += i82801er_pci.o -driver-y += i82801er_ac97.o -obj-y += i82801er_watchdog.o -obj-y += i82801er_reset.o diff --git a/src/southbridge/intel/i82801ex/Kconfig b/src/southbridge/intel/i82801ex/Kconfig new file mode 100644 index 0000000000..905af26235 --- /dev/null +++ b/src/southbridge/intel/i82801ex/Kconfig @@ -0,0 +1,3 @@ +config SOUTHBRIDGE_INTEL_I82801EX + bool + select IOAPIC diff --git a/src/southbridge/intel/i82801ex/Makefile.inc b/src/southbridge/intel/i82801ex/Makefile.inc new file mode 100644 index 0000000000..66a217ba6a --- /dev/null +++ b/src/southbridge/intel/i82801ex/Makefile.inc @@ -0,0 +1,11 @@ +driver-y += i82801ex.o +driver-y += i82801ex_uhci.o +driver-y += i82801ex_lpc.o +driver-y += i82801ex_ide.o +driver-y += i82801ex_sata.o +driver-y += i82801ex_ehci.o +driver-y += i82801ex_smbus.o +driver-y += i82801ex_pci.o +driver-y += i82801ex_ac97.o +obj-y += i82801ex_watchdog.o +obj-y += i82801ex_reset.o diff --git a/src/southbridge/intel/i82801er/chip.h b/src/southbridge/intel/i82801ex/chip.h index eb63889794..34a0a97ffd 100644 --- a/src/southbridge/intel/i82801er/chip.h +++ b/src/southbridge/intel/i82801ex/chip.h @@ -1,7 +1,7 @@ -#ifndef I82801ER_CHIP_H -#define I82801ER_CHIP_H +#ifndef I82801EX_CHIP_H +#define I82801EX_CHIP_H -struct southbridge_intel_i82801er_config +struct southbridge_intel_i82801ex_config { #define ICH5R_GPIO_USE_MASK 0x03 @@ -30,7 +30,7 @@ struct southbridge_intel_i82801er_config unsigned int pirq_a_d; unsigned int pirq_e_h; }; -extern struct chip_operations southbridge_intel_i82801er_ops; +extern struct chip_operations southbridge_intel_i82801ex_ops; -#endif /* I82801ER_CHIP_H */ +#endif /* I82801EX_CHIP_H */ diff --git a/src/southbridge/intel/i82801er/cmos_failover.c b/src/southbridge/intel/i82801ex/cmos_failover.c index 4821fad3d2..4821fad3d2 100644 --- a/src/southbridge/intel/i82801er/cmos_failover.c +++ b/src/southbridge/intel/i82801ex/cmos_failover.c diff --git a/src/southbridge/intel/i82801er/i82801er.c b/src/southbridge/intel/i82801ex/i82801ex.c index 19b0666cdb..bc5f04bf44 100644 --- a/src/southbridge/intel/i82801er/i82801er.c +++ b/src/southbridge/intel/i82801ex/i82801ex.c @@ -2,15 +2,15 @@ #include <device/device.h> #include <device/pci.h> #include <device/pci_ids.h> -#include "i82801er.h" +#include "i82801ex.h" -void i82801er_enable(device_t dev) +void i82801ex_enable(device_t dev) { device_t lpc_dev; unsigned index = 0; uint16_t reg_old, reg; - /* See if we are behind the i82801er pci bridge */ + /* See if we are behind the i82801ex pci bridge */ lpc_dev = dev_find_slot(dev->bus->secondary, PCI_DEVFN(0x1f, 0)); if((dev->path.pci.devfn &0xf8)== 0xf8) { index = dev->path.pci.devfn & 7; @@ -42,7 +42,7 @@ void i82801er_enable(device_t dev) } -struct chip_operations southbridge_intel_i82801er_ops = { - CHIP_NAME("Intel 82801ER Southbridge") - .enable_dev = i82801er_enable, +struct chip_operations southbridge_intel_i82801ex_ops = { + CHIP_NAME("Intel ICH5 (82801Ex) Series Southbridge") + .enable_dev = i82801ex_enable, }; diff --git a/src/southbridge/intel/i82801er/i82801er.h b/src/southbridge/intel/i82801ex/i82801ex.h index bd7410162b..67fecdd57e 100644 --- a/src/southbridge/intel/i82801er/i82801er.h +++ b/src/southbridge/intel/i82801ex/i82801ex.h @@ -1,9 +1,9 @@ -#ifndef I82801ER_H -#define I82801ER_H +#ifndef I82801EX_H +#define I82801EX_H #include "chip.h" -extern void i82801er_enable(device_t dev); +extern void i82801ex_enable(device_t dev); #define PCI_DMA_CFG 0x90 #define SERIRQ_CNTL 0x64 @@ -12,4 +12,4 @@ extern void i82801er_enable(device_t dev); #define RTC_CONF 0xd8 #define GEN_PMCON_3 0xa4 -#endif /* I82801ER_H */ +#endif /* I82801EX_H */ diff --git a/src/southbridge/intel/i82801er/i82801er_ac97.c b/src/southbridge/intel/i82801ex/i82801ex_ac97.c index 0525a5ebdf..65502dd8cc 100644 --- a/src/southbridge/intel/i82801er/i82801er_ac97.c +++ b/src/southbridge/intel/i82801ex/i82801ex_ac97.c @@ -3,7 +3,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801er.h" +#include "i82801ex.h" static void ac97_set_subsystem(device_t dev, unsigned vendor, unsigned device) { @@ -21,7 +21,7 @@ static struct device_operations ac97_ops = { .enable_resources = pci_dev_enable_resources, .init = 0, .scan_bus = 0, - .enable = i82801er_enable, + .enable = i82801ex_enable, .ops_pci = &lops_pci, }; diff --git a/src/southbridge/intel/i82801er/i82801er_early_smbus.c b/src/southbridge/intel/i82801ex/i82801ex_early_smbus.c index 42a55680af..c86bf23bb7 100644 --- a/src/southbridge/intel/i82801er/i82801er_early_smbus.c +++ b/src/southbridge/intel/i82801ex/i82801ex_early_smbus.c @@ -1,4 +1,4 @@ -#include "i82801er_smbus.h" +#include "i82801ex_smbus.h" #define SMBUS_IO_BASE 0x0f00 diff --git a/src/southbridge/intel/i82801er/i82801er_ehci.c b/src/southbridge/intel/i82801ex/i82801ex_ehci.c index 47b18de505..60b1f304c2 100644 --- a/src/southbridge/intel/i82801er/i82801er_ehci.c +++ b/src/southbridge/intel/i82801ex/i82801ex_ehci.c @@ -3,7 +3,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801er.h" +#include "i82801ex.h" static void ehci_init(struct device *dev) { @@ -39,7 +39,7 @@ static struct device_operations ehci_ops = { .enable_resources = pci_dev_enable_resources, .init = ehci_init, .scan_bus = 0, - .enable = i82801er_enable, + .enable = i82801ex_enable, .ops_pci = &lops_pci, }; diff --git a/src/southbridge/intel/i82801er/i82801er_ide.c b/src/southbridge/intel/i82801ex/i82801ex_ide.c index 8d8e391a97..b4d2311e0b 100644 --- a/src/southbridge/intel/i82801er/i82801er_ide.c +++ b/src/southbridge/intel/i82801ex/i82801ex_ide.c @@ -3,7 +3,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801er.h" +#include "i82801ex.h" static void ide_init(struct device *dev) { @@ -16,7 +16,7 @@ static void ide_init(struct device *dev) printk_debug("IDE Enabled\n"); } -static void i82801er_ide_set_subsystem(device_t dev, unsigned vendor, unsigned device) +static void i82801ex_ide_set_subsystem(device_t dev, unsigned vendor, unsigned device) { /* This value is also visible in uchi[0-2] and smbus functions */ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, @@ -24,7 +24,7 @@ static void i82801er_ide_set_subsystem(device_t dev, unsigned vendor, unsigned d } static struct pci_operations lops_pci = { - .set_subsystem = i82801er_ide_set_subsystem, + .set_subsystem = i82801ex_ide_set_subsystem, }; static struct device_operations ide_ops = { .read_resources = pci_dev_read_resources, diff --git a/src/southbridge/intel/i82801er/i82801er_lpc.c b/src/southbridge/intel/i82801ex/i82801ex_lpc.c index 357e181a9d..6cf8124c50 100644 --- a/src/southbridge/intel/i82801er/i82801er_lpc.c +++ b/src/southbridge/intel/i82801ex/i82801ex_lpc.c @@ -10,7 +10,7 @@ #include <pc80/isa-dma.h> #include <arch/io.h> #include <arch/ioapic.h> -#include "i82801er.h" +#include "i82801ex.h" #define ACPI_BAR 0x40 #define GPIO_BAR 0x58 @@ -24,7 +24,7 @@ #endif #define SERIRQ_CNTL 0x64 -static void i82801er_enable_serial_irqs(device_t dev) +static void i82801ex_enable_serial_irqs(device_t dev) { /* set packet length and toggle silent mode bit */ pci_write_config8(dev, SERIRQ_CNTL, (1 << 7)|(1 << 6)|((21 - 17) << 2)|(0 << 0)); @@ -32,22 +32,22 @@ static void i82801er_enable_serial_irqs(device_t dev) } #define PCI_DMA_CFG 0x90 -static void i82801er_pci_dma_cfg(device_t dev) +static void i82801ex_pci_dma_cfg(device_t dev) { /* Set PCI DMA CFG to lpc I/F DMA */ pci_write_config16(dev, PCI_DMA_CFG, 0xfcff); } #define LPC_EN 0xe6 -static void i82801er_enable_lpc(device_t dev) +static void i82801ex_enable_lpc(device_t dev) { /* lpc i/f enable */ pci_write_config8(dev, LPC_EN, 0x0d); } -typedef struct southbridge_intel_i82801er_config config_t; +typedef struct southbridge_intel_i82801ex_config config_t; -static void set_i82801er_gpio_use_sel( +static void set_i82801ex_gpio_use_sel( device_t dev, struct resource *res, config_t *config) { uint32_t gpio_use_sel, gpio_use_sel2; @@ -76,7 +76,7 @@ static void set_i82801er_gpio_use_sel( outl(gpio_use_sel2, res->base + 0x30); } -static void set_i82801er_gpio_direction( +static void set_i82801ex_gpio_direction( device_t dev, struct resource *res, config_t *config) { uint32_t gpio_io_sel, gpio_io_sel2; @@ -105,7 +105,7 @@ static void set_i82801er_gpio_direction( outl(gpio_io_sel2, res->base + 0x34); } -static void set_i82801er_gpio_level( +static void set_i82801ex_gpio_level( device_t dev, struct resource *res, config_t *config) { uint32_t gpio_lvl, gpio_lvl2; @@ -140,7 +140,7 @@ static void set_i82801er_gpio_level( outl(gpio_lvl2, res->base + 0x38); } -static void set_i82801er_gpio_inv( +static void set_i82801ex_gpio_inv( device_t dev, struct resource *res, config_t *config) { uint32_t gpio_inv; @@ -161,7 +161,7 @@ static void set_i82801er_gpio_inv( outl(gpio_inv, res->base + 0x2c); } -static void i82801er_pirq_init(device_t dev) +static void i82801ex_pirq_init(device_t dev) { config_t *config; @@ -177,7 +177,7 @@ static void i82801er_pirq_init(device_t dev) } -static void i82801er_gpio_init(device_t dev) +static void i82801ex_gpio_init(device_t dev) { struct resource *res; config_t *config; @@ -199,16 +199,16 @@ static void i82801er_gpio_init(device_t dev) } /* Set the use selects */ - set_i82801er_gpio_use_sel(dev, res, config); + set_i82801ex_gpio_use_sel(dev, res, config); /* Set the IO direction */ - set_i82801er_gpio_direction(dev, res, config); + set_i82801ex_gpio_direction(dev, res, config); /* Setup the input inverters */ - set_i82801er_gpio_inv(dev, res, config); + set_i82801ex_gpio_inv(dev, res, config); /* Set the value on the GPIO output pins */ - set_i82801er_gpio_level(dev, res, config); + set_i82801ex_gpio_level(dev, res, config); } @@ -250,11 +250,11 @@ static void lpc_init(struct device *dev) pci_write_config32(dev, 0xd4, value); setup_ioapic(IO_APIC_ADDR, 0); // Don't rename IO APIC ID. - i82801er_enable_serial_irqs(dev); + i82801ex_enable_serial_irqs(dev); - i82801er_pci_dma_cfg(dev); + i82801ex_pci_dma_cfg(dev); - i82801er_enable_lpc(dev); + i82801ex_enable_lpc(dev); /* Clear SATA to non raid */ pci_write_config8(dev, 0xae, 0x00); @@ -269,10 +269,10 @@ static void lpc_init(struct device *dev) printk_info("set power %s after power fail\n", pwr_on?"on":"off"); /* Set up the PIRQ */ - i82801er_pirq_init(dev); + i82801ex_pirq_init(dev); /* Set the state of the gpio lines */ - i82801er_gpio_init(dev); + i82801ex_gpio_init(dev); /* Initialize the real time clock */ rtc_init(0); @@ -286,7 +286,7 @@ static void lpc_init(struct device *dev) enable_hpet(dev); } -static void i82801er_lpc_read_resources(device_t dev) +static void i82801ex_lpc_read_resources(device_t dev) { struct resource *res; @@ -318,7 +318,7 @@ static void i82801er_lpc_read_resources(device_t dev) res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } -static void i82801er_lpc_enable_resources(device_t dev) +static void i82801ex_lpc_enable_resources(device_t dev) { uint8_t acpi_cntl, gpio_cntl; @@ -343,12 +343,12 @@ static struct pci_operations lops_pci = { }; static struct device_operations lpc_ops = { - .read_resources = i82801er_lpc_read_resources, + .read_resources = i82801ex_lpc_read_resources, .set_resources = pci_dev_set_resources, - .enable_resources = i82801er_lpc_enable_resources, + .enable_resources = i82801ex_lpc_enable_resources, .init = lpc_init, .scan_bus = scan_static_bus, - .enable = i82801er_enable, + .enable = i82801ex_enable, .ops_pci = &lops_pci, }; diff --git a/src/southbridge/intel/i82801er/i82801er_pci.c b/src/southbridge/intel/i82801ex/i82801ex_pci.c index 6aa578f7f6..650628b5e5 100644 --- a/src/southbridge/intel/i82801er/i82801er_pci.c +++ b/src/southbridge/intel/i82801ex/i82801ex_pci.c @@ -3,7 +3,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801er.h" +#include "i82801ex.h" static void pci_init(struct device *dev) { diff --git a/src/southbridge/intel/i82801er/i82801er_reset.c b/src/southbridge/intel/i82801ex/i82801ex_reset.c index fa41756557..a1d92a7cc1 100644 --- a/src/southbridge/intel/i82801er/i82801er_reset.c +++ b/src/southbridge/intel/i82801ex/i82801ex_reset.c @@ -1,6 +1,6 @@ #include <arch/io.h> -void i82801er_hard_reset(void) +void i82801ex_hard_reset(void) { /* Try rebooting through port 0xcf9 */ outb((0 <<3)|(1<<2)|(1<<1), 0xcf9); diff --git a/src/southbridge/intel/i82801er/i82801er_sata.c b/src/southbridge/intel/i82801ex/i82801ex_sata.c index c710d83364..98431edc78 100644 --- a/src/southbridge/intel/i82801er/i82801er_sata.c +++ b/src/southbridge/intel/i82801ex/i82801ex_sata.c @@ -3,7 +3,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801er.h" +#include "i82801ex.h" static void sata_init(struct device *dev) { diff --git a/src/southbridge/intel/i82801er/i82801er_smbus.c b/src/southbridge/intel/i82801ex/i82801ex_smbus.c index ee32c697a7..adfbcb7cc9 100644 --- a/src/southbridge/intel/i82801er/i82801er_smbus.c +++ b/src/southbridge/intel/i82801ex/i82801ex_smbus.c @@ -5,8 +5,8 @@ #include <device/pci_ops.h> #include <device/smbus.h> #include <arch/io.h> -#include "i82801er.h" -#include "i82801er_smbus.h" +#include "i82801ex.h" +#include "i82801ex_smbus.h" static int lsmbus_read_byte(struct bus *bus, device_t dev, uint8_t address) { @@ -32,7 +32,7 @@ static struct device_operations smbus_ops = { .enable_resources = pci_dev_enable_resources, .init = 0, .scan_bus = scan_static_bus, - .enable = i82801er_enable, + .enable = i82801ex_enable, .ops_pci = &lops_pci, .ops_smbus_bus = &lops_smbus_bus, }; diff --git a/src/southbridge/intel/i82801er/i82801er_smbus.h b/src/southbridge/intel/i82801ex/i82801ex_smbus.h index 861230e130..861230e130 100644 --- a/src/southbridge/intel/i82801er/i82801er_smbus.h +++ b/src/southbridge/intel/i82801ex/i82801ex_smbus.h diff --git a/src/southbridge/intel/i82801er/i82801er_uhci.c b/src/southbridge/intel/i82801ex/i82801ex_uhci.c index c0f42314a5..177b82089c 100644 --- a/src/southbridge/intel/i82801er/i82801er_uhci.c +++ b/src/southbridge/intel/i82801ex/i82801ex_uhci.c @@ -3,7 +3,7 @@ #include <device/pci.h> #include <device/pci_ids.h> #include <device/pci_ops.h> -#include "i82801er.h" +#include "i82801ex.h" static void uhci_init(struct device *dev) { @@ -32,7 +32,7 @@ static struct device_operations uhci_ops = { .enable_resources = pci_dev_enable_resources, .init = uhci_init, .scan_bus = 0, - .enable = i82801er_enable, + .enable = i82801ex_enable, .ops_pci = &lops_pci, }; diff --git a/src/southbridge/intel/i82801er/i82801er_watchdog.c b/src/southbridge/intel/i82801ex/i82801ex_watchdog.c index c9c09f5896..c9c09f5896 100644 --- a/src/southbridge/intel/i82801er/i82801er_watchdog.c +++ b/src/southbridge/intel/i82801ex/i82801ex_watchdog.c |