diff options
| author | Stefan Reinauer <stepan@openbios.org> | 2004-04-24 23:01:33 +0000 |
|---|---|---|
| committer | Stefan Reinauer <stepan@openbios.org> | 2004-04-24 23:01:33 +0000 |
| commit | 2ab88d1179d46e4e5242286b59ee8519fa79bb05 (patch) | |
| tree | 1a23808e0716943ec7a159254b19dc03a7713ac4 /src | |
| parent | f05dcb8d7afb3716959b94b8dac20ee551762624 (diff) | |
| download | coreboot-2ab88d1179d46e4e5242286b59ee8519fa79bb05.tar.xz | |
Major merge of YhLu's code from 2004/04/20: add s2875, various other updates,
cleanups. Drop "driver" code from mainboard directories and use them from the
driver directory instead
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
33 files changed, 1577 insertions, 384 deletions
diff --git a/src/mainboard/tyan/s2850/Config.lb b/src/mainboard/tyan/s2850/Config.lb index ad189c9202..4b1375f4c4 100644 --- a/src/mainboard/tyan/s2850/Config.lb +++ b/src/mainboard/tyan/s2850/Config.lb @@ -1,6 +1,9 @@ uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE uses USE_FALLBACK_IMAGE +uses LB_CKS_RANGE_START +uses LB_CKS_RANGE_END +uses LB_CKS_LOC uses MAINBOARD uses ARCH uses HARD_RESET_BUS @@ -22,13 +25,19 @@ register "fixup_scsi" = "1" register "fixup_vga" = "1" +## +## Move the default LinuxBIOS cmos range off of AMD RTC registers +## +default LB_CKS_RANGE_START=49 +default LB_CKS_RANGE_END=122 +default LB_CKS_LOC=123 + driver mainboard.o -driver adaptec_scsi.o -driver promise_sata.o -driver intel_nic.o -driver broadcom_nic.o +#driver adaptec_scsi.o +#driver si_sata.o +#driver intel_nic_ipmi.o +#driver broadcom_nic_ipmi.o #object reset.o -#object static_devices.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end # @@ -44,6 +53,7 @@ arch i386 end ### mainboardinit cpu/i386/entry16.inc mainboardinit cpu/i386/entry32.inc +mainboardinit cpu/i386/bist32.inc ldscript /cpu/i386/entry16.lds ldscript /cpu/i386/entry32.lds # @@ -95,9 +105,9 @@ end ### ### Setup the serial port ### -#mainboardinit superiowinbond/w83627hf/setup_serial.inc mainboardinit pc80/serial.inc mainboardinit arch/i386/lib/console.inc +mainboardinit cpu/i386/bist32_fail.inc # #### #### O.k. We aren't just an intermediary anymore! @@ -114,9 +124,6 @@ mainboardinit arch/i386/lib/console.inc ### ### Romcc output ### -#makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E" -#makerule ./failover.inc dep "./romcc ./failover.E" act "./romcc -O ./failover.E > failover.inc" -#mainboardinit .failover.inc makerule ./failover.E depends "$(MAINBOARD)/failover.c" @@ -125,16 +132,16 @@ end makerule ./failover.inc depends "./romcc ./failover.E" - action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end + action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E" +end makerule ./auto.E - depends "$(MAINBOARD)/auto.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" + depends "$(MAINBOARD)/auto.c option_table.h" + action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" end makerule ./auto.inc depends "./romcc ./auto.E" - action "./romcc -O -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E" -# action "./romcc -mcpu=k8 -O ./auto.E > auto.inc" + action "./romcc -O2 -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E" end mainboardinit cpu/k8/enable_mmx_sse.inc mainboardinit ./auto.inc @@ -143,6 +150,7 @@ mainboardinit cpu/k8/disable_mmx_sse.inc ### ### Include the secondary Configuration files ### + northbridge amd/amdk8 "mc0" pci 0:18.0 pci 0:18.0 @@ -162,22 +170,38 @@ northbridge amd/amdk8 "mc0" pci 1:0.1 on pci 1:0.2 on pci 1:1.0 off + superio winbond/w83627hf link 1 + pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + pnp 2e.6 off # CIR + pnp 2e.7 off # GAME_MIDI_GIPO1 + pnp 2e.8 off # GPIO2 + pnp 2e.9 off # GPIO3 + pnp 2e.a off # ACPI + pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + end end end -#northbridge amd/amdk8 -#end -#southbridge amd/amd8111 "amd8111" -#end -#mainboardinit archi386/smp/secondary.inc -#superio NSC/pc87360 -# register "com1" = "{1}" -# register "lpt" = "{1}" -#end dir /pc80 -##dir /src/superio/winbond/w83627hf #dir /bioscall -#dir /cpu/k8 cpu k8 "cpu0" register "up" = "{.chip = &amd8111, .ht_width=8, .ht_speed=200}" end diff --git a/src/mainboard/tyan/s2850/auto.c b/src/mainboard/tyan/s2850/auto.c index 84d9f21a39..8dc498ce14 100644 --- a/src/mainboard/tyan/s2850/auto.c +++ b/src/mainboard/tyan/s2850/auto.c @@ -1,104 +1,117 @@ #define ASSEMBLY 1 #include <stdint.h> #include <device/pci_def.h> -#include <cpu/p6/apic.h> #include <arch/io.h> +#include <device/pnp_def.h> #include <arch/romcc_io.h> +#include <arch/smp/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/early_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/k8/apic_timer.c" #include "lib/delay.c" #include "cpu/p6/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" +#include "northbridge/amd/amdk8/debug.c" #include "northbridge/amd/amdk8/cpu_rev.c" - +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* enable cf9 */ + pci_write_config8(PCI_DEV(0, 0x02, 3), 0x41, 0xf1); + /* reset */ + outb(0x0e, 0x0cf9); +} +static void soft_reset(void) +{ + set_bios_reset(); + pci_write_config8(PCI_DEV(0, 0x02, 0), 0x47, 1); +} + #define REV_B_RESET 0 static void memreset_setup(void) { -#if REV_B_RESET==1 + if (is_cpu_pre_c0()) { outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 -#else + } + else { outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 -#endif - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); + } + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); } static void memreset(int controllers, const struct mem_controller *ctrl) { + if (is_cpu_pre_c0()) { udelay(800); -#if REV_B_RESET==1 outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 -#endif udelay(90); + } } + static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) { + /* Routing Table Node i + * + * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c + * i: 0, 1, 2, 3, 4, 5, 6, 7 + * + * [ 0: 3] Request Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [11: 8] Response Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [19:16] Broadcast route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + */ + uint32_t ret=0x00010101; /* default row entry */ + return ret; } +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + static inline int spd_read_byte(unsigned device, unsigned address) { return smbus_read_byte(device, address); } -/* include mainboard specific ht code */ -#include "hypertransport.c" - -//#include "northbridge/amd/amdk8/cpu_ldtstop.c" -//#include "southbridge/amd/amd8111/amd8111_ldtstop.c" - #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" #include "sdram/generic_sdram.c" -static void enable_lapic(void) -{ - msr_t msr; - msr = rdmsr(0x1b); - msr.hi &= 0xffffff00; - msr.lo &= 0x000007ff; - msr.lo |= APIC_DEFAULT_BASE | (1 << 11); - wrmsr(0x1b, msr); -} - -static void stop_this_cpu(void) -{ - unsigned apicid; - apicid = apic_read(APIC_ID) >> 24; - - /* Send an APIC INIT to myself */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); - apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT); - /* Wait for the ipi send to finish */ - apic_wait_icr_idle(); - - /* Deassert the APIC INIT */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); - apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT); - /* Wait for the ipi send to finish */ - apic_wait_icr_idle(); - - /* If I haven't halted spin forever */ - for(;;) { - hlt(); - } -} -#define FIRST_CPU 1 -#define SECOND_CPU 0 -#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) static void main(void) { + /* + * GPIO28 of 8111 will control H0_MEMRESET_L + * GPIO29 of 8111 will control H1_MEMRESET_L + */ static const struct mem_controller cpu[] = { -#if FIRST_CPU { .node_id = 0, .f0 = PCI_DEV(0, 0x18, 0), @@ -108,42 +121,37 @@ static void main(void) .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, }, -#endif -#if SECOND_CPU - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, - .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, - }, -#endif }; - if (cpu_init_detected()) { - asm("jmp __cpu_reset"); - } - enable_lapic(); - init_timer(); - if (!boot_cpu() ) { - notify_bsp_ap_is_stopped(); - stop_this_cpu(); - } - uart_init(); - console_init(); - setup_default_resource_map(); - setup_coherent_ht_domain(); - enumerate_ht_chain(0); - distinguish_cpu_resets(0); - + + int needs_reset; + enable_lapic(); + init_timer(); + if (cpu_init_detected()) { + asm("jmp __cpu_reset"); + } + distinguish_cpu_resets(); + if (!boot_cpu()) { + stop_this_cpu(); + } + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + setup_default_resource_map(); + needs_reset = setup_coherent_ht_domain(); + needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } #if 0 print_pci_devices(); #endif enable_smbus(); #if 0 - dump_spd_registers(&cpu[0]); +// dump_spd_registers(&cpu[0]); + dump_smbus_registers(); #endif + memreset_setup(); sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); diff --git a/src/mainboard/tyan/s2850/cmos.layout b/src/mainboard/tyan/s2850/cmos.layout index 5ba4c032c1..247715e6ac 100644 --- a/src/mainboard/tyan/s2850/cmos.layout +++ b/src/mainboard/tyan/s2850/cmos.layout @@ -29,6 +29,9 @@ entries 386 1 e 1 ECC_memory 388 4 r 0 reboot_bits 392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first @@ -36,7 +39,14 @@ entries 424 4 e 7 boot_third 428 4 h 0 boot_index 432 8 h 0 boot_countdown -1008 16 h 0 check_sum +440 4 e 9 slow_cpu +444 1 e 1 nmi +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory + + enumerations @@ -66,9 +76,21 @@ enumerations 7 9 Fallback_HDD 7 10 Fallback_Floppy #7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% checksums -checksum 392 1007 1008 +checksum 392 983 984 diff --git a/src/mainboard/tyan/s2850/failover.c b/src/mainboard/tyan/s2850/failover.c index 8eeeaef7e1..b22abfea06 100644 --- a/src/mainboard/tyan/s2850/failover.c +++ b/src/mainboard/tyan/s2850/failover.c @@ -3,36 +3,78 @@ #include <device/pci_def.h> #include <device/pci_ids.h> #include <arch/io.h> -#include "arch/romcc_io.h" +#include <arch/romcc_io.h> +#include <arch/smp/lapic.h> #include "pc80/mc146818rtc_early.c" #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" #include "cpu/p6/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" +#define HAVE_REGPARM_SUPPORT 0 +#if HAVE_REGPARM_SUPPORT +static unsigned long main(unsigned long bist) +{ +#else static void main(void) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(0); + unsigned long bist = 0; +#endif + /* Make cerain my local apic is useable */ + enable_lapic(); - /* Setup the 8111 */ - amd8111_enable_rom(); - - /* Is this a cpu reset? */ + /* Is this a cpu only reset? */ if (cpu_init_detected()) { if (last_boot_normal()) { - asm("jmp __normal_image"); + goto normal_image; } else { - asm("jmp __cpu_reset"); + goto cpu_reset; } } /* Is this a secondary cpu? */ - else if (!boot_cpu() && last_boot_normal()) { - asm("jmp __normal_image"); + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + + /* Setup the 8111 */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; } /* This is the primary cpu how should I boot? */ else if (do_normal_boot()) { - asm("jmp __normal_image"); + goto normal_image; + } + else { + goto fallback_image; } + normal_image: + asm("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + : /* clobbers */ + ); + cpu_reset: + asm("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + : /* clobbers */ + ); + fallback_image: +#if HAVE_REGPARM_SUPPORT + return bist; +#else + return; +#endif } diff --git a/src/mainboard/tyan/s2850/irq_tables.c b/src/mainboard/tyan/s2850/irq_tables.c index 3f1e5bdf24..f0bcd77c8c 100644 --- a/src/mainboard/tyan/s2850/irq_tables.c +++ b/src/mainboard/tyan/s2850/irq_tables.c @@ -22,15 +22,15 @@ const struct irq_routing_table intel_irq_routing_table = { { {1,(2<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, {0x2,0, {{0, 0}, {0, 0}, {0, 0}, {0x4, 0xdef8}}, 0, 0}, - {0x2,0x68, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x2,0x58, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x2,0x18, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0}, - {0x2,0x30, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x1, 0}, - {0x2,0x38, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x2, 0}, - {0x2,0x40, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0}, - {0x2,0x48, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x4, 0}, - {0x2,0x50, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x5, 0}, - {0x2,0x70, {{0x1, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x2,0x60, {{0x2, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x2,(0x0d<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x2,(0x0b<<3)|0, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x2,(3<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0}, + {0x2,(6<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x1, 0}, + {0x2,(7<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x2, 0}, + {0x2,(8<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0}, + {0x2,(9<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x4, 0}, + {0x2,(0x0a<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x6, 0}, + {0x2,(0x0e<<3)|0, {{0x1, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x2,(0x0c<<3)|0, {{0x2, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, } }; diff --git a/src/mainboard/tyan/s2850/mainboard.c b/src/mainboard/tyan/s2850/mainboard.c index 11ed302083..6864a0333d 100644 --- a/src/mainboard/tyan/s2850/mainboard.c +++ b/src/mainboard/tyan/s2850/mainboard.c @@ -38,7 +38,7 @@ static void fixup_lsi_53c1030(struct device *pdev) } #endif //extern static void lsi_scsi_init(struct device *dev); -#if 1 +#if 0 static void print_pci_regs(struct device *dev) { uint8_t byte; @@ -120,7 +120,7 @@ static void onboard_scsi_fixup(void) // print_mem(); // amd8111_enable_rom(); } -#if 1 +#if 0 static void vga_fixup(void) { // we do this right here because: // - all the hardware is working, and some VGA bioses seem to need @@ -154,8 +154,8 @@ enable(struct chip *chip, enum chip_pass pass) case CONF_PASS_PRE_BOOT: if (conf->fixup_scsi) onboard_scsi_fixup(); - if (conf->fixup_vga) - vga_fixup(); +// if (conf->fixup_vga) +// vga_fixup(); printk_debug("mainboard fixup pass %d done\r\n", pass); break; diff --git a/src/mainboard/tyan/s2850/mptable.c b/src/mainboard/tyan/s2850/mptable.c index 77cf102904..6c457808c1 100644 --- a/src/mainboard/tyan/s2850/mptable.c +++ b/src/mainboard/tyan/s2850/mptable.c @@ -11,6 +11,10 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) static const char productid[12] = "S2850 "; struct mp_config_table *mc; + unsigned char bus_num; + unsigned char bus_isa; + unsigned char bus_8111_1; + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); memset(mc, 0, sizeof(*mc)); @@ -29,43 +33,107 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) mc->reserved = 0; smp_write_processors(mc, processor_map); + { + device_t dev; + + /* 8111 */ + dev = dev_find_slot(1, PCI_DEVFN(0x03,0)); + if (dev) { + bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + else { + printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + + bus_8111_1 = 2; + bus_isa = 3; + } + } +/*Bus: Bus ID Type*/ + /* define bus and isa numbers */ + for(bus_num = 0; bus_num < bus_isa; bus_num++) { + smp_write_bus(mc, bus_num, "PCI "); + } + smp_write_bus(mc, bus_isa, "ISA "); -/*Bus: Bus ID Type*/ - smp_write_bus(mc, 0, "PCI "); - smp_write_bus(mc, 1, "PCI "); - smp_write_bus(mc, 2, "PCI "); - smp_write_bus(mc, 3, "ISA "); - /*I/O APICs: APIC ID Version State Address*/ smp_write_ioapic(mc, 1, 0x11, 0xfec00000); -/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# -*/ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0x1, 0x1, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0x0, 0x1, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0x3, 0x1, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0x4, 0x1, 0x4); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0x5, 0x1, 0x5); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0x6, 0x1, 0x6); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0x7, 0x1, 0x7); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0x8, 0x1, 0x8); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0xc, 0x1, 0xc); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0xd, 0x1, 0xd); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0xe, 0x1, 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x3, 0xf, 0x1, 0xf); - +/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x1, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, 0x1, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x1, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, 0x1, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, 0x1, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, 0x1, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, 0x1, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, 0x1, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, 0x1, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, 0x1, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, 0x1, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, 0x1, 0xf); + + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, (2<<2)|3, 0x1, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, (2<<2)|3, 0x1, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x3, 0x1, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x34, 0x1, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x2c, 0x1, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x38, 0x1, 0x10); +//On Board AMD USB + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, 0x1, 0x13); + +//On Board ATI Display Adapter + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|0, 0x1, 0x12); + +//Onboard Broadcom 5705 NIC + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0d<<2)|0, 0x1, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0e<<2)|0, 0x1, 0x10); +//Onboard SI Serial ATA + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0c<<2)|0, 0x1, 0x11); + + +//PCI Slot 1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x03<<2)|0, 0x1, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x03<<2)|1, 0x1, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x03<<2)|2, 0x1, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x03<<2)|3, 0x1, 0x13); + + +//PCI Slot 2 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|0, 0x1, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|1, 0x1, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|2, 0x1, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|3, 0x1, 0x10); + + +//PCI Slot 3 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|0, 0x1, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|1, 0x1, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|2, 0x1, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|3, 0x1, 0x11); + + +//PCI Slot 4 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|0, 0x1, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|1, 0x1, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|2, 0x1, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|3, 0x1, 0x12); + +//PCI Slot 5 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|0, 0x1, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|1, 0x1, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|2, 0x1, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|3, 0x1, 0x13); +//PCI Slot 6 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|0, 0x1, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|1, 0x1, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|2, 0x1, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|3, 0x1, 0x10); /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x0, 0x0, MP_APIC_ALL, 0x0); - smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x0, 0x0, MP_APIC_ALL, 0x1); + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1); /* There is no extension information... */ /* Compute the checksums */ diff --git a/src/mainboard/tyan/s2875/Config.lb b/src/mainboard/tyan/s2875/Config.lb new file mode 100644 index 0000000000..650fc4f22f --- /dev/null +++ b/src/mainboard/tyan/s2875/Config.lb @@ -0,0 +1,220 @@ +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses USE_FALLBACK_IMAGE +uses LB_CKS_RANGE_START +uses LB_CKS_RANGE_END +uses LB_CKS_LOC +uses MAINBOARD +uses ARCH +uses HARD_RESET_BUS +uses HARD_RESET_DEVICE +uses HARD_RESET_FUNCTION + +# +# +### +### Set all of the defaults for an x86 architecture +### + +# +# +### +### Build the objects we have code for in this directory. +### + +config chip.h +register "fixup_scsi" = "1" +register "fixup_vga" = "1" + + +## +## Move the default LinuxBIOS cmos range off of AMD RTC registers +## +default LB_CKS_RANGE_START=49 +default LB_CKS_RANGE_END=122 +default LB_CKS_LOC=123 + +driver mainboard.o +#driver si_sata.o +#driver intel_nic.o +#object reset.o +if HAVE_MP_TABLE object mptable.o end +if HAVE_PIRQ_TABLE object irq_tables.o end +# +default HARD_RESET_BUS=1 +default HARD_RESET_DEVICE=5 +default HARD_RESET_FUNCTION=0 +# +# +arch i386 end + +# +### +### Build our 16 bit and 32 bit linuxBIOS entry code +### +mainboardinit cpu/i386/entry16.inc +mainboardinit cpu/i386/entry32.inc +mainboardinit cpu/i386/bist32.inc +ldscript /cpu/i386/entry16.lds +ldscript /cpu/i386/entry32.lds + +# +### +### Build our reset vector (This is where linuxBIOS is entered) +### +if USE_FALLBACK_IMAGE + mainboardinit cpu/i386/reset16.inc + ldscript /cpu/i386/reset16.lds +else + mainboardinit cpu/i386/reset32.inc + ldscript /cpu/i386/reset32.lds +end +# +#### Should this be in the northbridge code? +mainboardinit arch/i386/lib/cpu_reset.inc +# +### +### Include an id string (For safe flashing) +### +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds +# +#### +#### This is the early phase of linuxBIOS startup +#### Things are delicate and we test to see if we should +#### failover to another image. +#### +#option MAX_REBOOT_CNT=2 +if USE_FALLBACK_IMAGE + ldscript /arch/i386/lib/failover.lds +end +# +### +### Setup our mtrrs +### +mainboardinit cpu/k8/earlymtrr.inc +### +### Only the bootstrap cpu makes it here. +### Failover if we need to +### +# +if USE_FALLBACK_IMAGE + mainboardinit ./failover.inc +end + +# +# +### +### Setup the serial port +### +mainboardinit pc80/serial.inc +mainboardinit arch/i386/lib/console.inc +mainboardinit cpu/i386/bist32_fail.inc +# +#### +#### O.k. We aren't just an intermediary anymore! +#### +### +### Romcc output +### +makerule ./failover.E + depends "$(MAINBOARD)/failover.c" + action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" +end + +makerule ./failover.inc + depends "./romcc ./failover.E" + action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E" +end + +makerule ./auto.E + depends "$(MAINBOARD)/auto.c option_table.h" + action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" +end + +makerule ./auto.inc + depends "./romcc ./auto.E" + action "./romcc -O2 -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E" +end + +mainboardinit cpu/k8/enable_mmx_sse.inc +mainboardinit ./auto.inc +mainboardinit cpu/k8/disable_mmx_sse.inc + +# +### +### Include the secondary Configuration files +### +dir /pc80 + +northbridge amd/amdk8 "mc0" + pci 0:18.0 + pci 0:18.0 + pci 0:18.0 + pci 0:18.1 + pci 0:18.2 + pci 0:18.3 + southbridge amd/amd8151 "amd8151" link 0 + pci 0:0.0 + pci 0:1.0 + end + southbridge amd/amd8111 "amd8111" link 0 + pci 0:0.0 + pci 0:1.0 on + pci 0:1.1 on + pci 0:1.2 on + pci 0:1.3 on + pci 0:1.5 on + pci 0:1.6 off + pci 1:0.0 on + pci 1:0.1 on + pci 1:0.2 on + pci 1:1.0 off + superio winbond/w83627hf link 1 + pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + pnp 2e.6 off # CIR + pnp 2e.7 off # GAME_MIDI_GIPO1 + pnp 2e.8 off # GPIO2 + pnp 2e.9 off # GPIO3 + pnp 2e.a off # ACPI + pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + end + end +end + +northbridge amd/amdk8 "mc1" + pci 0:19.0 + pci 0:19.0 + pci 0:19.0 + pci 0:19.1 + pci 0:19.2 + pci 0:19.3 +end + +#dir /bioscall + +cpu k8 "cpu0" + register "up" = "{.chip = &amd8151, .ht_width=16, .ht_speed=600}" +end + +cpu k8 "cpu1" +end + diff --git a/src/mainboard/tyan/s2875/VERSION b/src/mainboard/tyan/s2875/VERSION new file mode 100644 index 0000000000..cd5ac039d6 --- /dev/null +++ b/src/mainboard/tyan/s2875/VERSION @@ -0,0 +1 @@ +2.0 diff --git a/src/mainboard/tyan/s2875/auto.c b/src/mainboard/tyan/s2875/auto.c new file mode 100644 index 0000000000..546f97bd84 --- /dev/null +++ b/src/mainboard/tyan/s2875/auto.c @@ -0,0 +1,214 @@ +#define ASSEMBLY 1 + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <arch/smp/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/k8/apic_timer.c" +#include "lib/delay.c" +#include "cpu/p6/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "northbridge/amd/amdk8/cpu_rev.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* enable cf9 */ + pci_write_config8(PCI_DEV(0, 0x05, 3), 0x41, 0xf1); + /* reset */ + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); + pci_write_config8(PCI_DEV(0, 0x05, 0), 0x47, 1); +} + +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 + } + else { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 + } + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 + udelay(90); + } +} + +static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) +{ + /* Routing Table Node i + * + * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c + * i: 0, 1, 2, 3, 4, 5, 6, 7 + * + * [ 0: 3] Request Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [11: 8] Response Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [19:16] Broadcast route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + */ + + uint32_t ret=0x00010101; /* default row entry */ + + static const unsigned int rows_2p[2][2] = { + { 0x00050101, 0x00010404 }, + { 0x00010404, 0x00050101 } + }; + + if(maxnodes>2) { + print_debug("this mainboard is only designed for 2 cpus\r\n"); + maxnodes=2; + } + + + if (!(node>=maxnodes || row>=maxnodes)) { + ret=rows_2p[node][row]; + } + + return ret; +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/raminit.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + +#define FIRST_CPU 1 +#define SECOND_CPU 1 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) +static void main(void) +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + + int needs_reset; + enable_lapic(); + init_timer(); + if (cpu_init_detected()) { + asm("jmp __cpu_reset"); + } + distinguish_cpu_resets(); + if (!boot_cpu()) { + stop_this_cpu(); + } + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + setup_default_resource_map(); + needs_reset = setup_coherent_ht_domain(); + needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } +#if 0 + dump_pci_devices(); +#endif + +#if 0 + print_pci_devices(); +#endif + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 0 + dump_pci_devices(); +#endif +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 1)); +#endif + + /* Check all of memory */ +#if 0 + msr_t msr; + msr = rdmsr(TOP_MEM2); + print_debug("TOP_MEM2: "); + print_debug_hex32(msr.hi); + print_debug_hex32(msr.lo); + print_debug("\r\n"); +#endif +/* +#if 0 + ram_check(0x00000000, msr.lo+(msr.hi<<32)); +#else +#if TOTAL_CPUS < 2 + // Check 16MB of memory @ 0 + ram_check(0x00000000, 0x00100000); +#else + // Check 16MB of memory @ 2GB + ram_check(0x80000000, 0x80100000); +#endif +#endif +*/ +} diff --git a/src/mainboard/tyan/s2875/chip.h b/src/mainboard/tyan/s2875/chip.h new file mode 100644 index 0000000000..9fa085d41c --- /dev/null +++ b/src/mainboard/tyan/s2875/chip.h @@ -0,0 +1,6 @@ +extern struct chip_control mainboard_tyan_s2875_control; + +struct mainboard_tyan_s2875_config { + int fixup_scsi; + int fixup_vga; +}; diff --git a/src/mainboard/tyan/s2875/cmos.layout b/src/mainboard/tyan/s2875/cmos.layout new file mode 100644 index 0000000000..247715e6ac --- /dev/null +++ b/src/mainboard/tyan/s2875/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 + + diff --git a/src/mainboard/tyan/s2875/failover.c b/src/mainboard/tyan/s2875/failover.c new file mode 100644 index 0000000000..b22abfea06 --- /dev/null +++ b/src/mainboard/tyan/s2875/failover.c @@ -0,0 +1,80 @@ +#define ASSEMBLY 1 +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <arch/romcc_io.h> +#include <arch/smp/lapic.h> +#include "pc80/mc146818rtc_early.c" +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" +#include "cpu/p6/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" + +#define HAVE_REGPARM_SUPPORT 0 +#if HAVE_REGPARM_SUPPORT +static unsigned long main(unsigned long bist) +{ +#else +static void main(void) +{ + unsigned long bist = 0; +#endif + /* Make cerain my local apic is useable */ + enable_lapic(); + + /* Is this a cpu only reset? */ + if (cpu_init_detected()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + /* Is this a secondary cpu? */ + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + + /* Setup the 8111 */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + asm("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + : /* clobbers */ + ); + cpu_reset: + asm("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + : /* clobbers */ + ); + fallback_image: +#if HAVE_REGPARM_SUPPORT + return bist; +#else + return; +#endif +} diff --git a/src/mainboard/tyan/s2875/irq_tables.c b/src/mainboard/tyan/s2875/irq_tables.c new file mode 100644 index 0000000000..ca230ba969 --- /dev/null +++ b/src/mainboard/tyan/s2875/irq_tables.c @@ -0,0 +1,37 @@ +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ + +#include <arch/pirq_routing.h> + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*13, /* there can be total 13 devices on the bus */ + 1, /* Where the interrupt router lies (bus) */ + (5<<3)|3, /* Where the interrupt router lies (dev) */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x1022, /* Vendor */ + 0x746b, /* Device */ + 0, /* Crap (miniport) */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xcf, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + { + {1,(5<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, + {0x3,0, {{0, 0}, {0, 0}, {0, 0}, {0x4, 0xdef8}}, 0, 0}, + {1,(1<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, + {0x2,0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, + {0x3,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0}, + {0x3,(7<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x4, 0}, + {0x3,(6<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x1, 0}, + {0x3,(8<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x2, 0}, + {0x3,(9<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x3, 0}, + {0x3,(5<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x3,(3<<3)|0, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x3,(0x0a<<3)|0, {{0x2, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x3,(0x0b<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0, 0}}, 0, 0}, + } +}; diff --git a/src/mainboard/tyan/s2875/mainboard.c b/src/mainboard/tyan/s2875/mainboard.c new file mode 100644 index 0000000000..bb1eba3b9b --- /dev/null +++ b/src/mainboard/tyan/s2875/mainboard.c @@ -0,0 +1,197 @@ +#include <console/console.h> +#include <device/device.h> +#include <device/chip.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include "../../../northbridge/amd/amdk8/northbridge.h" +#include "chip.h" +//#include <part/mainboard.h> +unsigned long initial_apicid[CONFIG_MAX_CPUS] = +{ + 0,1 +}; +#if 0 +static void fixup_lsi_53c1030(struct device *pdev) +{ +// uint8_t byte; + uint16_t word; + + byte = 1; + pci_write_config8(pdev, 0xff, byte); + // Set the device id +// pci_write_config_word(pdev, PCI_DEVICE_ID, PCI_DEVICE_ID_LSILOGIC_53C1030); + // Set the subsytem vendor id +// pci_write_config16(pdev, PCI_SUBSYSTEM_VENDOR_ID, PCI_VENDOR_ID_TYAN); + word = 0x10f1; + pci_write_config16(pdev, PCI_SUBSYSTEM_VENDOR_ID, word); + // Set the subsytem id + word = 0x2880; + pci_write_config16(pdev, PCI_SUBSYSTEM_ID, word); + // Disable writes to the device id + byte = 0; + pci_write_config8(pdev, 0xff, byte); + +// lsi_scsi_init(pdev); + +} +#endif +//extern static void lsi_scsi_init(struct device *dev); +#if 0 +static void print_pci_regs(struct device *dev) +{ + uint8_t byte; + int i; + + for(i=0;i<256;i++) { + byte = pci_read_config8(dev, i); + + if((i%16)==0) printk_debug("\n%02x:",i); + printk_debug(" %02x",byte); + } + printk_debug("\n"); + +// pci_write_config8(dev, 0x4, byte); + +} +#endif +#if 0 +static void print_mem(void) +{ + int i; + int low_1MB = 0; + for(i=low_1MB;i<low_1MB+1024*4;i++) { + if((i%16)==0) printk_debug("\n %08x:",i); + printk_debug(" %02x ",(unsigned char)*((unsigned char *)i)); + } + + for(i=low_1MB;i<low_1MB+1024*4;i++) { + if((i%16)==0) printk_debug("\n %08x:",i); + printk_debug(" %c ",(unsigned char)*((unsigned char *)i)); + } + } +#endif +#if 0 +static void amd8111_enable_rom(void) +{ + uint8_t byte; + struct device *dev; + + /* Enable 4MB rom access at 0xFFC00000 - 0xFFFFFFFF */ + /* Locate the amd8111 */ + dev = dev_find_device(0x1022, 0x7468, 0); + + /* Set the 4MB enable bit bit */ + byte = pci_read_config8(dev, 0x43); + byte |= 0x80; + pci_write_config8(dev, 0x43, byte); +} +#endif +#if 0 +static void onboard_scsi_fixup(void) +{ + struct device *dev; +#if 1 + unsigned char i,j,k; + + for(i=0;i<=6;i++) { + for(j=0;j<=0x1f;j++) { + for (k=0;k<=6;k++){ + dev = dev_find_slot(i, PCI_DEVFN(j, k)); + if (dev) { + printk_debug("%02x:%02x:%02x",i,j,k); + print_pci_regs(dev); + } + } + } + } +#endif + + +#if 0 + dev = dev_find_device(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1030,0); + if(!dev) { + printk_info("LSI_SCSI_FW_FIXUP: No Device Found!"); + return; + } + + lsi_scsi_init(dev); +#endif +// print_mem(); +// amd8111_enable_rom(); +} +#endif +#if 0 +static void vga_fixup(void) { + // we do this right here because: + // - all the hardware is working, and some VGA bioses seem to need + // that + // - we need page 0 below for linuxbios tables. +#if CONFIG_REALMODE_IDT == 1 + printk_debug("INSTALL REAL-MODE IDT\n"); + setup_realmode_idt(); +#endif +#if CONFIG_VGABIOS == 1 + printk_debug("DO THE VGA BIOS\n"); + do_vgabios(0x0600); + post_code(0x93); +#endif + +} + +#endif + + +static void +enable(struct chip *chip, enum chip_pass pass) +{ + + struct mainboard_tyan_s2875_config *conf = + (struct mainboard_tyan_s2875_config *)chip->chip_info; + + switch (pass) { + default: break; +// case CONF_PASS_PRE_CONSOLE: +// case CONF_PASS_PRE_PCI: +// case CONF_PASS_POST_PCI: + case CONF_PASS_PRE_BOOT: +// if (conf->fixup_scsi) + // onboard_scsi_fixup(); +// if (conf->fixup_vga) +// vga_fixup(); + printk_debug("mainboard fixup pass %d done\r\n", + pass); + break; + } + +} +void final_mainboard_fixup(void) +{ +#if 0 + enable_ide_devices(); +#endif +} +static struct device_operations mainboard_operations = { + .read_resources = root_dev_read_resources, + .set_resources = root_dev_set_resources, + .enable_resources = enable_childrens_resources, + .init = 0, + .scan_bus = amdk8_scan_root_bus, + .enable = 0, +}; + +static void enumerate(struct chip *chip) +{ + struct chip *child; + dev_root.ops = &mainboard_operations; + chip->dev = &dev_root; + chip->bus = 0; + for(child = chip->children; child; child = child->next) { + child->bus = &dev_root.link[0]; + } +} +struct chip_control mainboard_tyan_s2875_control = { + .enable = enable, + .enumerate = enumerate, + .name = "Tyan s2875 mainboard ", +}; diff --git a/src/mainboard/tyan/s2875/mptable.c b/src/mainboard/tyan/s2875/mptable.c new file mode 100644 index 0000000000..24116d0739 --- /dev/null +++ b/src/mainboard/tyan/s2875/mptable.c @@ -0,0 +1,172 @@ +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> + +void *smp_write_config_table(void *v, unsigned long * processor_map) +{ + static const char sig[4] = "PCMP"; + static const char oem[8] = "TYAN "; + static const char productid[12] = "S2875 "; + struct mp_config_table *mc; + + unsigned char bus_num; + unsigned char bus_isa; + unsigned char bus_8111_1; + unsigned char bus_8151_1; + + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc, processor_map); + + { + device_t dev; + + /* 8111 */ + dev = dev_find_slot(1, PCI_DEVFN(0x04,0)); + if (dev) { + bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + printk_debug("bus_isa=%d\n",bus_isa); + } + else { + printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + + bus_8111_1 = 3; + bus_isa = 4; + } + /* 8151 */ + dev = dev_find_slot(1, PCI_DEVFN(0x02,0)); + if (dev) { + bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + printk_debug("bus_8151_1=%d\n",bus_8151_1); + + } + else { + printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + + bus_8151_1 = 2; + } + + + } + + + +/*Bus: Bus ID Type*/ + /* define bus and isa numbers */ + for(bus_num = 0; bus_num < bus_isa; bus_num++) { + smp_write_bus(mc, bus_num, "PCI "); + } + smp_write_bus(mc, bus_isa, "ISA "); + +/*I/O APICs: APIC ID Version State Address*/ + smp_write_ioapic(mc, 2, 0x11, 0xfec00000); + +/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# +*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x2, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, 0x2, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x2, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, 0x2, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, 0x2, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, 0x2, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, 0x2, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, 0x2, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, 0x2, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, 0x2, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, 0x2, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, 0x2, 0xf); + + +//??? What + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, (5<<2)|3, 0x2, 0x13); +//Onboard AMD AC97 Audio ??? + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, (5<<2)|1, 0x2, 0x11); +// Onboard AMD USB + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, 0x2, 0x13); + +// AGP Display Adapter + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8151_1, 0x0, 0x2, 0x10); + +// Onboard Serial ATA + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x05<<2)|0, 0x2, 0x13); +//Onboard Firewire + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|0, 0x2, 0x11); +//Onboard Broadcom NIC + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x03<<2)|0, 0x2, 0x12); + +//Onboard VIA USB 1.1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|0, 0x2, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|1, 0x2, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|2, 0x2, 0x13); + +//Slot 1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|0, 0x2, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|1, 0x2, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|2, 0x2, 0x10); // + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|3, 0x2, 0x11); // + +//Slot 2 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|0, 0x2, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|1, 0x2, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|2, 0x2, 0x13); // + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|3, 0x2, 0x10); // + +//Slot 3 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|0, 0x2, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|1, 0x2, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|2, 0x2, 0x12); // + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|3, 0x2, 0x13); // + +//Slot 4 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|0, 0x2, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|1, 0x2, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|2, 0x2, 0x11); // + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|3, 0x2, 0x12); // + + +//Slot 5 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x04<<2)|0, 0x2, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x04<<2)|1, 0x2, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x04<<2)|2, 0x2, 0x12); // + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x04<<2)|3, 0x2, 0x13); // + + + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + printk_debug("Wrote the mp table end at: %p - %p\n", + mc, smp_next_mpe_entry(mc)); + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v, processor_map); +} diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb index 892429686d..fd38465f3b 100644 --- a/src/mainboard/tyan/s2880/Config.lb +++ b/src/mainboard/tyan/s2880/Config.lb @@ -32,7 +32,7 @@ default LB_CKS_LOC=123 driver mainboard.o -driver lsi_scsi.o +dir ../common/lsi_scsi #driver adaptec_scsi.o #driver promise_sata.o #driver intel_nic.o @@ -126,8 +126,7 @@ makerule ./auto.E end makerule ./auto.inc depends "./romcc ./auto.E" - action "./romcc -O -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E" -# action "./romcc -mcpu=k8 -O ./auto.E > auto.inc" + action "./romcc -O2 -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E" end mainboardinit cpu/k8/enable_mmx_sse.inc mainboardinit ./auto.inc diff --git a/src/mainboard/tyan/s2880/auto.c b/src/mainboard/tyan/s2880/auto.c index 6ad2489124..afe399ae72 100644 --- a/src/mainboard/tyan/s2880/auto.c +++ b/src/mainboard/tyan/s2880/auto.c @@ -39,24 +39,24 @@ static void soft_reset(void) set_bios_reset(); pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); } -#define REV_B_RESET 0 static void memreset_setup(void) { -#if REV_B_RESET==1 + if (is_cpu_pre_c0()) { outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 -#else + } + else { outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 -#endif + } outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); } static void memreset(int controllers, const struct mem_controller *ctrl) { + if (is_cpu_pre_c0()) { udelay(800); -#if REV_B_RESET==1 outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 -#endif udelay(90); + } } static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) @@ -114,7 +114,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) } /* include mainboard specific ht code */ -#include "hypertransport.c" +//#include "hypertransport.c" #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" @@ -166,7 +166,7 @@ static void main(void) needs_reset = setup_coherent_ht_domain(); needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); if (needs_reset) { - print_info("ht reset -\r\t"); + print_info("ht reset -\r\n"); soft_reset(); } diff --git a/src/mainboard/tyan/s2881/Config.lb b/src/mainboard/tyan/s2881/Config.lb index 786391095a..a82d0b0fe6 100644 --- a/src/mainboard/tyan/s2881/Config.lb +++ b/src/mainboard/tyan/s2881/Config.lb @@ -37,7 +37,8 @@ driver mainboard.o #driver adaptec_scsi.o #driver si_sata.o #driver intel_nic.o -#driver broadcom_nic.o +#dir ../drivers/broadcom_nic_ipmi +dir ../drivers/ati_graph #object reset.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end @@ -117,9 +118,6 @@ mainboardinit cpu/i386/bist32_fail.inc ### ### Romcc output ### -#makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E" -#makerule ./failover.inc dep "./romcc ./failover.E" act "./romcc -O ./failover.E > failover.inc" -#mainboardinit .failover.inc makerule ./failover.E depends "$(MAINBOARD)/failover.c" @@ -128,7 +126,7 @@ end makerule ./failover.inc depends "./romcc ./failover.E" - action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end + action "./romcc -O2 -o failover.inc --label-prefix=failover ./failover.E"end makerule ./auto.E depends "$(MAINBOARD)/auto.c option_table.h" @@ -136,8 +134,7 @@ makerule ./auto.E end makerule ./auto.inc depends "./romcc ./auto.E" - action "./romcc -O -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E" -# action "./romcc -mcpu=k8 -O ./auto.E > auto.inc" + action "./romcc -O2 -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E" end mainboardinit cpu/k8/enable_mmx_sse.inc mainboardinit ./auto.inc @@ -146,6 +143,9 @@ mainboardinit cpu/k8/disable_mmx_sse.inc ### ### Include the secondary Configuration files ### + +dir /pc80 + northbridge amd/amdk8 "mc0" pci 0:18.0 pci 0:18.0 @@ -171,31 +171,33 @@ northbridge amd/amdk8 "mc0" pci 1:0.1 on pci 1:0.2 on pci 1:1.0 off - superio winbond/w83627hf link 1 - pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - pnp 2e.6 off # CIR - pnp 2e.7 off # GAME_MIDI_GIPO1 - pnp 2e.8 off # GPIO2 - pnp 2e.9 off # GPIO3 - pnp 2e.a off # ACPI - pnp 2e.b off # HW Monitor - end +# superio winbond/w83627hf link 1 +# pnp 2e.0 on # Floppy +# io 0x60 = 0x3f0 +# irq 0x70 = 6 +# drq 0x74 = 2 +# pnp 2e.1 off # Parallel Port +# io 0x60 = 0x378 +# irq 0x70 = 7 +# pnp 2e.2 on # Com1 +# io 0x60 = 0x3f8 +# irq 0x70 = 4 +# pnp 2e.3 off # Com2 +# io 0x60 = 0x2f8 +# irq 0x70 = 3 +# pnp 2e.5 on # Keyboard +# io 0x60 = 0x60 +# io 0x62 = 0x64 +# irq 0x70 = 1 +# irq 0x72 = 12 +# pnp 2e.6 off # CIR +# pnp 2e.7 off # GAME_MIDI_GIPO1 +# pnp 2e.8 off # GPIO2 +# pnp 2e.9 off # GPIO3 +# pnp 2e.a off # ACPI +# pnp 2e.b on # HW Monitor +# io 0x60 = 0x290 +# end end end @@ -209,7 +211,6 @@ northbridge amd/amdk8 "mc1" end -dir /pc80 #dir /bioscall cpu k8 "cpu0" register "up" = "{.chip = &amd8131, .ht_width=16, .ht_speed=600}" diff --git a/src/mainboard/tyan/s2881/auto.c b/src/mainboard/tyan/s2881/auto.c index d23e4a69b2..41dce71397 100644 --- a/src/mainboard/tyan/s2881/auto.c +++ b/src/mainboard/tyan/s2881/auto.c @@ -39,24 +39,24 @@ static void soft_reset(void) pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); } -#define REV_B_RESET 0 static void memreset_setup(void) { -#if REV_B_RESET==1 + if (is_cpu_pre_c0()) { outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 -#else + } + else { outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 -#endif + } outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); } static void memreset(int controllers, const struct mem_controller *ctrl) { + if (is_cpu_pre_c0()) { udelay(800); -#if REV_B_RESET==1 outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 -#endif udelay(90); + } } static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) @@ -165,7 +165,7 @@ static void main(void) needs_reset = setup_coherent_ht_domain(); needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xc0); if (needs_reset) { - print_info("ht reset -\r\t"); + print_info("ht reset -\r\n"); soft_reset(); } diff --git a/src/mainboard/tyan/s2881/irq_tables.c b/src/mainboard/tyan/s2881/irq_tables.c index 1dd342f373..37c5df677e 100644 --- a/src/mainboard/tyan/s2881/irq_tables.c +++ b/src/mainboard/tyan/s2881/irq_tables.c @@ -18,7 +18,7 @@ const struct irq_routing_table intel_irq_routing_table = { 0x746b, /* Device */ 0, /* Crap (miniport) */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x3d, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + 0x66, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ { {1,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, {0x4,0, {{0, 0}, {0, 0}, {0, 0}, {0x4, 0xdef8}}, 0, 0}, diff --git a/src/mainboard/tyan/s2881/mainboard.c b/src/mainboard/tyan/s2881/mainboard.c index 3ba458866c..86158b7551 100644 --- a/src/mainboard/tyan/s2881/mainboard.c +++ b/src/mainboard/tyan/s2881/mainboard.c @@ -38,7 +38,7 @@ static void fixup_lsi_53c1030(struct device *pdev) } #endif //extern static void lsi_scsi_init(struct device *dev); -#if 1 +#if 0 static void print_pci_regs(struct device *dev) { uint8_t byte; @@ -152,12 +152,11 @@ enable(struct chip *chip, enum chip_pass pass) // case CONF_PASS_PRE_PCI: // case CONF_PASS_POST_PCI: case CONF_PASS_PRE_BOOT: - if (conf->fixup_scsi) - onboard_scsi_fixup(); +// if (conf->fixup_scsi) + // onboard_scsi_fixup(); // if (conf->fixup_vga) // vga_fixup(); - printk_debug("mainboard fixup pass %d done\r\n", - pass); +// printk_debug("mainboard fixup pass %d done\r\n",pass); break; } diff --git a/src/mainboard/tyan/s2881/mptable.c b/src/mainboard/tyan/s2881/mptable.c index cb1dfc8f2d..3a9bfebe55 100644 --- a/src/mainboard/tyan/s2881/mptable.c +++ b/src/mainboard/tyan/s2881/mptable.c @@ -137,7 +137,7 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|3, 0x3, 0x2);// -//On Board NIC and LSI scsi +//On Board NIC and adaptec scsi smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, 0x3, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|1, 0x3, 0x1); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0xa<<2)|0, 0x3, 0x0); diff --git a/src/mainboard/tyan/s2882/auto.c b/src/mainboard/tyan/s2882/auto.c index c922e632e3..bd4a9aa4c5 100644 --- a/src/mainboard/tyan/s2882/auto.c +++ b/src/mainboard/tyan/s2882/auto.c @@ -42,21 +42,22 @@ static void soft_reset(void) #define REV_B_RESET 0 static void memreset_setup(void) { -#if REV_B_RESET==1 + if (is_cpu_pre_c0()) { outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 -#else + } + else { outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 -#endif + } outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); } static void memreset(int controllers, const struct mem_controller *ctrl) { + if (is_cpu_pre_c0()) { udelay(800); -#if REV_B_RESET==1 outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 -#endif udelay(90); + } } diff --git a/src/mainboard/tyan/s2882/mainboard.c b/src/mainboard/tyan/s2882/mainboard.c index 5f06f0fcc5..0f440856af 100644 --- a/src/mainboard/tyan/s2882/mainboard.c +++ b/src/mainboard/tyan/s2882/mainboard.c @@ -151,12 +151,11 @@ enable(struct chip *chip, enum chip_pass pass) // case CONF_PASS_PRE_PCI: case CONF_PASS_POST_PCI: case CONF_PASS_PRE_BOOT: - if (conf->fixup_scsi) - onboard_scsi_fixup(); +// if (conf->fixup_scsi) +// onboard_scsi_fixup(); // if (conf->fixup_vga) // vga_fixup(); - printk_debug("mainboard fixup pass %d done\r\n", - pass); +// printk_debug("mainboard fixup pass %d done\r\n",pass); break; } diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c index 2915886cc9..712ff731d1 100644 --- a/src/mainboard/tyan/s2885/auto.c +++ b/src/mainboard/tyan/s2885/auto.c @@ -1,4 +1,5 @@ -#define ASSEMBLY 1 +#define ASSEMBLY 1 + #include <stdint.h> #include <device/pci_def.h> #include <arch/io.h> @@ -41,21 +42,22 @@ static void soft_reset(void) static void memreset_setup(void) { - if (is_cpu_pre_c0()) { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 - } else { - outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 - } + if (is_cpu_pre_c0()) { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 + } + else { + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 + } + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); } static void memreset(int controllers, const struct mem_controller *ctrl) { - if (is_cpu_pre_c0()) { - udelay(800); - outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 - udelay(90); - } + if (is_cpu_pre_c0()) { + udelay(800); + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 + udelay(90); + } } static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) @@ -82,20 +84,21 @@ static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) * [3] Route to Link 2 */ - uint32_t ret = 0x00010101; /* default row entry */ + uint32_t ret=0x00010101; /* default row entry */ static const unsigned int rows_2p[2][2] = { { 0x00050101, 0x00010404 }, { 0x00010404, 0x00050101 } }; - if (maxnodes > 2) { + if(maxnodes>2) { print_debug("this mainboard is only designed for 2 cpus\r\n"); - maxnodes = 2; + maxnodes=2; } - if (!(node >= maxnodes || row >= maxnodes)) { - ret = rows_2p[node][row]; + + if (!(node>=maxnodes || row>=maxnodes)) { + ret=rows_2p[node][row]; } return ret; @@ -147,10 +150,10 @@ static void main(void) #endif }; +#if 1 static const struct ht_chain ht_c[] = { { .udev = PCI_DEV(0, 0x18, 0), - /* LDT2 */ .upos = 0xc0, .devreg = 0xe0, }, @@ -160,27 +163,28 @@ static void main(void) .devreg = 0xe4, }, }; - int needs_reset; +#endif + int needs_reset; enable_lapic(); init_timer(); - if (cpu_init_detected()) { asm("jmp __cpu_reset"); } - distinguish_cpu_resets(); if (!boot_cpu()) { stop_this_cpu(); } - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); - setup_s2885_resource_map(); needs_reset = setup_coherent_ht_domain(); +#if 0 + needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xc0); +#else needs_reset |= ht_setup_chains(ht_c, sizeof(ht_c)/sizeof(ht_c[0])); +#endif if (needs_reset) { print_info("ht reset -\r\n"); soft_reset(); @@ -189,22 +193,20 @@ static void main(void) dump_pci_devices(); #endif - #if 0 print_pci_devices(); #endif - enable_smbus(); - #if 0 dump_spd_registers(&cpu[0]); #endif - memreset_setup(); sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); #if 0 dump_pci_devices(); +#endif +#if 0 dump_pci_device(PCI_DEV(0, 0x18, 1)); #endif @@ -216,7 +218,11 @@ static void main(void) print_debug_hex32(msr.hi); print_debug_hex32(msr.lo); print_debug("\r\n"); +#endif +/* +#if 0 ram_check(0x00000000, msr.lo+(msr.hi<<32)); +#else #if TOTAL_CPUS < 2 // Check 16MB of memory @ 0 ram_check(0x00000000, 0x00100000); @@ -225,4 +231,5 @@ static void main(void) ram_check(0x80000000, 0x80100000); #endif #endif +*/ } diff --git a/src/mainboard/tyan/s2885/irq_tables.c b/src/mainboard/tyan/s2885/irq_tables.c index cc04c58716..b6a1c19460 100644 --- a/src/mainboard/tyan/s2885/irq_tables.c +++ b/src/mainboard/tyan/s2885/irq_tables.c @@ -20,16 +20,16 @@ const struct irq_routing_table intel_irq_routing_table = { { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ 0x35, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ { - {0x03,(0x4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, - {0x06, 0|0, {{0x0, 0x0000}, {0x0, 0x0000}, {0x0, 0x0000}, {0x4, 0xdef8}}, 0, 0}, - {0x01, 0|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0x0, 0}, - {0x05,(0x3<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, - {0x05,(0x6<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x2, 0}, - {0x04,(0x8<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0}, - {0x04,(0x7<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0}, - {0x06,(0xa<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0}, - {0x04,(0x9<<3)|0, {{0x1, 0xdef8}, {2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, - {0x06,(0xb<<3)|0, {{0x2, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x06,(0xc<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {3,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, + {0x6,0, {{0, 0}, {0, 0}, {0, 0}, {0x4, 0xdef8}}, 0, 0}, + {0x1,0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0x0, 0}, + {0x5,(3<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, + {0x5,(6<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x2, 0}, + {0x4,(8<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0}, + {0x4,(7<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0}, + {0x6,(0x0a<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0}, + {0x4,(9<<3)|0, {{0x1, 0xdef8}, {2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, + {0x6,(0x0b<<3)|0, {{0x2, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x6,(0x0c<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, } }; diff --git a/src/mainboard/tyan/s2885/mainboard.c b/src/mainboard/tyan/s2885/mainboard.c index e142f1b6d7..b3e7c83cc9 100644 --- a/src/mainboard/tyan/s2885/mainboard.c +++ b/src/mainboard/tyan/s2885/mainboard.c @@ -87,10 +87,11 @@ static void amd8111_enable_rom(void) pci_write_config8(dev, 0x43, byte); } #endif +#if 0 static void onboard_scsi_fixup(void) { struct device *dev; -#if 0 +#if 1 unsigned char i,j,k; for(i=0;i<=6;i++) { @@ -119,6 +120,7 @@ static void onboard_scsi_fixup(void) // print_mem(); // amd8111_enable_rom(); } +#endif #if 0 static void vga_fixup(void) { // we do this right here because: @@ -153,8 +155,8 @@ enable(struct chip *chip, enum chip_pass pass) // case CONF_PASS_PRE_PCI: // case CONF_PASS_POST_PCI: case CONF_PASS_PRE_BOOT: - if (conf->fixup_scsi) - onboard_scsi_fixup(); +// if (conf->fixup_scsi) + // onboard_scsi_fixup(); // if (conf->fixup_vga) // vga_fixup(); printk_debug("mainboard fixup pass %d done\r\n", diff --git a/src/mainboard/tyan/s2885/mptable.c b/src/mainboard/tyan/s2885/mptable.c index a3afe539fe..dd7cefcc85 100644 --- a/src/mainboard/tyan/s2885/mptable.c +++ b/src/mainboard/tyan/s2885/mptable.c @@ -6,19 +6,19 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) { - static const char sig[4] = "PCMP"; + static const char sig[4] = "PCMP"; static const char oem[8] = "TYAN "; static const char productid[12] = "S2885 "; struct mp_config_table *mc; unsigned char bus_num; unsigned char bus_isa; - unsigned char bus_8111_0; - unsigned char bus_8111_1; unsigned char bus_8131_1; unsigned char bus_8131_2; + unsigned char bus_8111_1; unsigned char bus_8151_1; + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); memset(mc, 0, sizeof(*mc)); @@ -38,70 +38,81 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) smp_write_processors(mc, processor_map); - { + { device_t dev; /* 8111 */ dev = dev_find_slot(3, PCI_DEVFN(0x03,0)); if (dev) { - bus_8111_0 = pci_read_config8(dev, PCI_PRIMARY_BUS); bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; printk_debug("bus_isa=%d\n",bus_isa); - } else { + } + else { printk_debug("ERROR - could not find PCI 3:03.0, using defaults\n"); + bus_8111_1 = 6; bus_isa = 7; } - /* 8131-1 */ dev = dev_find_slot(3, PCI_DEVFN(0x01,0)); if (dev) { bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { + + } + else { printk_debug("ERROR - could not find PCI 3:01.0, using defaults\n"); + bus_8131_1 = 4; } /* 8131-2 */ dev = dev_find_slot(3, PCI_DEVFN(0x02,0)); if (dev) { bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { + + } + else { printk_debug("ERROR - could not find PCI 3:02.0, using defaults\n"); + bus_8131_2 = 5; } - /* 8151 */ + /* 8151 */ dev = dev_find_slot(1, PCI_DEVFN(0x02,0)); if (dev) { bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - printk_debug("bus_8151_1=%d\n",bus_8151_1); - } else { + printk_debug("bus_8151_1=%d\n",bus_8151_1); + + } + else { printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + bus_8151_1 = 2; - } + } + + } - /*Bus: Bus ID Type*/ - /* define bus and isa numbers */ - for (bus_num = 0; bus_num < bus_isa; bus_num++) { + + +/*Bus: Bus ID Type*/ + /* define bus and isa numbers */ + for(bus_num = 0; bus_num < bus_isa; bus_num++) { smp_write_bus(mc, bus_num, "PCI "); } smp_write_bus(mc, bus_isa, "ISA "); - /*I/O APICs: APIC ID Version State Address*/ +/*I/O APICs: APIC ID Version State Address*/ smp_write_ioapic(mc, 2, 0x11, 0xfec00000); { struct pci_dev *dev; uint32_t base; - /* 8131-1 APIC */ dev = dev_find_slot(3, PCI_DEVFN(0x1,1)); if (dev) { base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); base &= PCI_BASE_ADDRESS_MEM_MASK; smp_write_ioapic(mc, 3, 0x11, base); } - /* 8131-2 APIC */ dev = dev_find_slot(3, PCI_DEVFN(0x2,1)); if (dev) { base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); @@ -110,82 +121,77 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) } } - /* ISA Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x2, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, 0x2, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x2, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, 0x2, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, 0x2, 0x4); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x5, 0x2, 0x5); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, 0x2, 0x6); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, 0x2, 0x7); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, 0x2, 0x8); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, 0x2, 0xc); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, 0x2, 0xd); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, 0x2, 0xe); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, 0x2, 0xf); - - /* PCI Ints: Type Polarity Trigger Bus ID PCIDEVNUM|IRQ APIC ID PIN# */ - // Integrated SMBus 2.0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, (0x04<<2)|3, 0x2, 0x13); - // Integrated AMD AC97 Audio - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, (0x04<<2)|1, 0x2, 0x11); - - // Integrated AMD USB - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x00<<2)|3, 0x2, 0x13); - - // Onboard Serial ATA - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|0, 0x2, 0x11); - // Onboard Firewire - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0c<<2)|0, 0x2, 0x13); - - // Onboard Broadcom NIC - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0x09<<2)|0, 0x3, 0x0); - - // AGP Display Adapter - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8151_1, 0x0, 0x2, 0x10); - - //Slot 5 PCI 32 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|0, 0x2, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|1, 0x2, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|2, 0x2, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|3, 0x2, 0x13); - - //Slot 3 PCIX 100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0x08<<2)|0, 0x3, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0x08<<2)|1, 0x3, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0x08<<2)|2, 0x3, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0x08<<2)|3, 0x3, 0x2); - - //Slot 4 PCIX 100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0x07<<2)|0, 0x3, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0x07<<2)|1, 0x3, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0x07<<2)|2, 0x3, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0x07<<2)|3, 0x3, 0x1); - - //Slot 1 PCI-X 133/100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (0x03<<2)|0, 0x4, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (0x03<<2)|1, 0x4, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (0x03<<2)|2, 0x4, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (0x03<<2)|3, 0x4, 0x3); - - //Slot 2 PCI-X 133/100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (0x06<<2)|0, 0x4, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (0x06<<2)|1, 0x4, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (0x06<<2)|2, 0x4, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (0x06<<2)|3, 0x4, 0x0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# +*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x2, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, 0x2, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x2, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, 0x2, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, 0x2, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x5, 0x2, 0x5); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, 0x2, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, 0x2, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, 0x2, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, 0x2, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, 0x2, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, 0x2, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, 0x2, 0xf); +//??? What + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (4<<2)|3, 0x2, 0x13); +//Onboard AMD AC97 Audio ??? + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (4<<2)|1, 0x2, 0x11); +// Onboard AMD USB + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, 0x2, 0x13); + +// AGP Display Adapter + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8151_1, 0x0, 0x2, 0x10); + +// Onboard Serial ATA + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|0, 0x2, 0x11); +//Onboard Firewire + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0c<<2)|0, 0x2, 0x13); +//Onboard Broadcom NIC + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, 0x3, 0x0); + +//Slot 5 PCI 32 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|0, 0x2, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|1, 0x2, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|2, 0x2, 0x12); // + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|3, 0x2, 0x13); // + +//Slot 3 PCIX 100/66 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|0, 0x3, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|1, 0x3, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|2, 0x3, 0x1);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|3, 0x3, 0x2);// + +//Slot 4 PCIX 100/66 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|0, 0x3, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|1, 0x3, 0x3);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|2, 0x3, 0x0);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|3, 0x3, 0x1);// + +//Slot 1 PCI-X 133/100/66 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|0, 0x4, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|1, 0x4, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|2, 0x4, 0x2); // + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|3, 0x4, 0x3); // + +//Slot 2 PCI-X 133/100/66 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|0, 0x4, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|1, 0x4, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|2, 0x4, 0x3);// + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|3, 0x4, 0x0);// + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); - smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1); - + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1); /* There is no extension information... */ /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); printk_debug("Wrote the mp table end at: %p - %p\n", - mc, smp_next_mpe_entry(mc)); + mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb index 4f85e44252..95714c354c 100644 --- a/src/mainboard/tyan/s4880/Config.lb +++ b/src/mainboard/tyan/s4880/Config.lb @@ -33,9 +33,9 @@ default LB_CKS_RANGE_END=122 default LB_CKS_LOC=123 driver mainboard.o -driver lsi_scsi.o +dir ../common/lsi_scsi #driver adaptec_scsi.o -driver si_sata.o +#driver si_sata.o #driver intel_nic.o #object reset.o if HAVE_MP_TABLE object mptable.o end @@ -116,9 +116,6 @@ mainboardinit cpu/i386/bist32_fail.inc ### ### Romcc output ### -#makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E" -#makerule ./failover.inc dep "./romcc ./failover.E" act "./romcc -O ./failover.E > failover.inc" -#mainboardinit .failover.inc makerule ./failover.E depends "$(MAINBOARD)/failover.c" @@ -136,7 +133,6 @@ end makerule ./auto.inc depends "./romcc ./auto.E" action "./romcc -O2 -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E" -# action "./romcc -mcpu=k8 -O ./auto.E > auto.inc" end mainboardinit cpu/k8/enable_mmx_sse.inc mainboardinit ./auto.inc diff --git a/src/mainboard/tyan/s4880/auto.c b/src/mainboard/tyan/s4880/auto.c index cd0ae20ed8..d433e6083d 100644 --- a/src/mainboard/tyan/s4880/auto.c +++ b/src/mainboard/tyan/s4880/auto.c @@ -40,24 +40,24 @@ static void soft_reset(void) } -#define REV_B_RESET 0 static void memreset_setup(void) { -#if REV_B_RESET==1 + if (is_cpu_pre_c0()) { outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 -#else + } + else { outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 -#endif + } outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); } static void memreset(int controllers, const struct mem_controller *ctrl) { + if (is_cpu_pre_c0()) { udelay(800); -#if REV_B_RESET==1 outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 -#endif udelay(90); + } } static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) diff --git a/src/mainboard/tyan/s4882/Config.lb b/src/mainboard/tyan/s4882/Config.lb index ea826238b5..9972696a4e 100644 --- a/src/mainboard/tyan/s4882/Config.lb +++ b/src/mainboard/tyan/s4882/Config.lb @@ -34,9 +34,9 @@ default LB_CKS_RANGE_END=122 default LB_CKS_LOC=123 driver mainboard.o -driver lsi_scsi.o +dir ../common/lsi_scsi #driver adaptec_scsi.o -driver si_sata.o +#driver si_sata.o #driver intel_nic.o #object reset.o if HAVE_MP_TABLE object mptable.o end @@ -137,7 +137,6 @@ end makerule ./auto.inc depends "./romcc ./auto.E" action "./romcc -O2 -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E" -# action "./romcc -mcpu=k8 -O ./auto.E > auto.inc" end mainboardinit cpu/k8/enable_mmx_sse.inc mainboardinit ./auto.inc diff --git a/src/mainboard/tyan/s4882/auto.c b/src/mainboard/tyan/s4882/auto.c index bbf1df9927..e07ae7826d 100644 --- a/src/mainboard/tyan/s4882/auto.c +++ b/src/mainboard/tyan/s4882/auto.c @@ -40,24 +40,24 @@ static void soft_reset(void) } -#define REV_B_RESET 0 static void memreset_setup(void) { -#if REV_B_RESET==1 + if (is_cpu_pre_c0()) { outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 -#else + } + else { outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 -#endif + } outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); } static void memreset(int controllers, const struct mem_controller *ctrl) { + if (is_cpu_pre_c0()) { udelay(800); -#if REV_B_RESET==1 outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 -#endif udelay(90); + } } static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) @@ -215,11 +215,8 @@ static void main(void) setup_s4882_resource_map(); needs_reset = setup_coherent_ht_domain(); needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xa0); -#if 0 - dump_pci_device(PCI_DEV(0, 4, 0)); -#endif if (needs_reset) { - print_info("ht reset -"); + print_info("ht reset -\r\n"); soft_reset(); } |