summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorVincent Palatin <vpalatin@chromium.org>2018-05-14 12:12:16 +0200
committerMartin Roth <martinroth@google.com>2018-05-31 15:25:00 +0000
commit405eb44fdb3a8a2d0188e2550367c846a76919aa (patch)
treea5fb9f4f3892e67e45c1541a2af6d306356d8bc4 /src
parent9593e973fa0e3a104837d1df9659b3992d915b34 (diff)
downloadcoreboot-405eb44fdb3a8a2d0188e2550367c846a76919aa.tar.xz
mb/google/poppy/variants/nocturne: configure the FPMCU interface
The FPMCU is using the standard cros-ec-spi interface on GSPI1. Configure the GPIOs controlling the MCU too. We need to be able to wake from S3 on the MCU interrupt, re-configure GPE0 DW0 to point to GPP_C bank. BRANCH=poppy BUG=b:79666174 TEST=exercise the cros_ec interface, e.g. 'ectool --name=cros_fp version', verify the MKBP events by doing 'ectool --name=cros_fp fpmode fingerup' then 'ectool --name=cros_fp waitevent 5 10000', toggle the other GPIOs with the flash_fp_mcu script. Change-Id: Ib417dcf84cda8e354060785cd16a7b6b812148d5 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/26684 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/google/poppy/variants/nocturne/devicetree.cb20
-rw-r--r--src/mainboard/google/poppy/variants/nocturne/gpio.c14
2 files changed, 25 insertions, 9 deletions
diff --git a/src/mainboard/google/poppy/variants/nocturne/devicetree.cb b/src/mainboard/google/poppy/variants/nocturne/devicetree.cb
index 621bbe495d..91e8b46cf1 100644
--- a/src/mainboard/google/poppy/variants/nocturne/devicetree.cb
+++ b/src/mainboard/google/poppy/variants/nocturne/devicetree.cb
@@ -11,7 +11,7 @@ chip soc/intel/skylake
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
- register "gpe0_dw0" = "GPP_B"
+ register "gpe0_dw0" = "GPP_C"
register "gpe0_dw1" = "GPP_D"
register "gpe0_dw2" = "GPP_E"
@@ -326,7 +326,23 @@ chip soc/intel/skylake
device spi 0 on end
end
end # GSPI #0
- device pci 1e.3 on end # GSPI #1
+ device pci 1e.3 on
+ chip drivers/spi/acpi
+ register "hid" = "ACPI_DT_NAMESPACE_HID"
+ register "uid" = "1"
+ register "compat_string" = ""google,cros-ec-spi""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C11_IRQ)"
+ register "wake" = "GPE0_DW0_09" # GPP_C9
+ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+ register "reset_delay_ms" = "0"
+ register "reset_off_delay_ms" = "0"
+ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
+ register "enable_delay_ms" = "0"
+ register "enable_off_delay_ms" = "0"
+ register "has_power_resource" = "1"
+ device spi 0 on end
+ end
+ end # GSPI #1
device pci 1e.4 on end # eMMC
device pci 1e.5 off end # SDIO
device pci 1e.6 off end # SDCard
diff --git a/src/mainboard/google/poppy/variants/nocturne/gpio.c b/src/mainboard/google/poppy/variants/nocturne/gpio.c
index bd38a20fdd..be76b64267 100644
--- a/src/mainboard/google/poppy/variants/nocturne/gpio.c
+++ b/src/mainboard/google/poppy/variants/nocturne/gpio.c
@@ -39,8 +39,8 @@ static const struct pad_config gpio_table[] = {
PAD_CFG_NC(GPP_A10),
/* A11 : PCH_FP_PWR_EN */
PAD_CFG_GPO(GPP_A11, 0, DEEP),
- /* A12 : FPMCU_INT */
- PAD_CFG_GPI_APIC(GPP_A12, NONE, DEEP),
+ /* A12 : ISH_GP6 */
+ PAD_CFG_NC(GPP_A12),
/* A13 : SUSWARN# ==> SUSWARN_L */
PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1),
/* A14 : ESPI_RESET# */
@@ -108,7 +108,7 @@ static const struct pad_config gpio_table[] = {
/* B21 : GSPI1_MISO ==> PCH_FPMCU_SPI_MISO_R */
PAD_CFG_NF(GPP_B21, NONE, DEEP, NF1),
/* B22 : GSPI1_MOSI ==> PCH_FPMCU_SPI_MOSI_R */
- PAD_CFG_NF(GPP_B22, 20K_PD, DEEP, NF1),
+ PAD_CFG_NF(GPP_B22, NONE, DEEP, NF1),
/* B23 : SM1ALERT# ==> PCHHOT# */
PAD_CFG_NF(GPP_B23, 20K_PD, DEEP, NF2),
@@ -129,13 +129,13 @@ static const struct pad_config gpio_table[] = {
/* C7 : SM1DATA ==> NC */
PAD_CFG_NC(GPP_C7),
/* C8 : UART0_RXD ==> PCH_FPMCU_BOOT0 */
- PAD_CFG_NC(GPP_C8),
+ PAD_CFG_GPO(GPP_C8, 0, DEEP),
/* C9 : UART0_TXD ==> FPMCU_INT */
- PAD_CFG_NC(GPP_C9),
+ PAD_CFG_GPI_ACPI_SCI(GPP_C9, NONE, DEEP, INVERT),
/* C10 : UART0_RTS# ==> PCH_FPMCU_RST_ODL */
- PAD_CFG_NC(GPP_C10),
+ PAD_CFG_GPO(GPP_C10, 0, DEEP),
/* C11 : UART0_CTS# ==> FPMCU_INT */
- PAD_CFG_NC(GPP_C11),
+ PAD_CFG_GPI_APIC_INVERT(GPP_C11, NONE, DEEP),
/* C12 : UART1_RXD ==> PCH_MEM_CONFIG[0] */
PAD_CFG_GPI_GPIO_DRIVER(GPP_C12, NONE, DEEP),
/* C13 : UART1_TXD ==> PCH_MEM_CONFIG[1] */