mb/google/kahlee: Tune eDP panel initialization time

1. Add two parameters for panel initialization timing.
   > lvds_poseq_varybl_to_blon
   > lvds_poseq_blon_to_varybl
2. The BL_PWM is controlled by APU_EDP_BKLTEN_L/APU_DP_VARY_BL/
   EDP_BKLTEN_L, so move APU_EDP_BKLTEN_L to early init stage,
   and be enabled depends on SKU, thus we can control the delay
   time by config APU_DP_VARY_BL.

BUG=b:118011567
TEST=emerge-grunt coreboot.

Change-Id: Ib20c48813b208d697b950b2f02a70a690e483fdb
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/29469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>

3 files changed, 38 insertions, 3 deletions

diff --git a/src/mainboard/google/kahlee/OemCustomize.c b/src/mainboard/google/kahlee/OemCustomize.c
index a0bd8cddbd..12e50724ec 100644
--- a/src/mainboard/google/kahlee/OemCustomize.c
+++ b/src/mainboard/google/kahlee/OemCustomize.c
@@ -16,6 +16,9 @@
 #include <chip.h>
 #include <amdblocks/agesawrapper.h>
 #include <boardid.h>
+#include <gpio.h>
+#include <console/console.h>
+#include <soc/pci_devs.h>
 
 #define DIMMS_PER_CHANNEL 1
 #if DIMMS_PER_CHANNEL > MAX_DIMMS_PER_CH
@@ -75,5 +78,28 @@ void OemPostParams(AMD_POST_PARAMS *PostParams)
 
 void set_board_env_params(GNB_ENV_CONFIGURATION *params)
 {
+	const struct soc_amd_stoneyridge_config *cfg;
+	const struct device *dev = dev_find_slot(0, GNB_DEVFN);
+	if (!dev || !dev->chip_info) {
+		printk(BIOS_WARNING, "Warning: Cannot find SoC devicetree config\n");
+		return;
+	}
+	cfg = dev->chip_info;
+	if (cfg->lvds_poseq_blon_to_varybl && cfg->lvds_poseq_varybl_to_blon) {
+		/*
+		 * GPIO 133 - Backlight enable (active low)
+		 * Pass control of the backlight to the video BIOS
+		 */
+		gpio_set(GPIO_133, 0);
+		printk(BIOS_INFO, "Change panel init timing\n");
+		params->LvdsPowerOnSeqVaryBlToBlon =
+			cfg->lvds_poseq_varybl_to_blon;
+		params->LvdsPowerOnSeqBlonToVaryBl =
+			cfg->lvds_poseq_blon_to_varybl;
+		printk(BIOS_INFO, "LvdsPowerOnSeqVaryBlToBlon: %dms\n",
+			(params->LvdsPowerOnSeqVaryBlToBlon)*4);
+		printk(BIOS_INFO, "LvdsPowerOnSeqBlonToVaryBl: %dms\n",
+			(params->LvdsPowerOnSeqBlonToVaryBl)*4);
+	}
 	params->EDPv1_4VSMode = EDP_VS_HIGH_VDIFF_MODE;
 }
diff --git a/src/mainboard/google/kahlee/variants/baseboard/gpio.c b/src/mainboard/google/kahlee/variants/baseboard/gpio.c
index 6095a08af0..f6bc83c4e2 100644
--- a/src/mainboard/google/kahlee/variants/baseboard/gpio.c
+++ b/src/mainboard/google/kahlee/variants/baseboard/gpio.c
@@ -77,6 +77,9 @@ static const struct soc_amd_gpio gpio_set_stage_reset[] = {
 	/* GPIO_132 - CONFIG_STRAP4 */
 	PAD_GPI(GPIO_132, PULL_NONE),
 
+	/* GPIO_133 - APU_EDP_BKLTEN_L (backlight - Active LOW) */
+	PAD_GPO(GPIO_133, HIGH),
+
 	/* GPIO_136 - UART_PCH_RX_DEBUG_TX */
 	PAD_NF(GPIO_136, UART0_RXD, PULL_NONE),
 
@@ -217,9 +220,6 @@ static const struct soc_amd_gpio gpio_set_stage_ram[] = {
 	/* GPIO_130 - Unused (TP55) */
 	PAD_GPI(GPIO_130, PULL_UP),
 
-	/* GPIO_133 - APU_EDP_BKLTEN_L (backlight - Active LOW) */
-	PAD_GPO(GPIO_133, HIGH),
-
 	/* GPIO_135 - BCLK Buffer Enable */
 	PAD_GPO(GPIO_135, HIGH),
 
diff --git a/src/soc/amd/stoneyridge/chip.h b/src/soc/amd/stoneyridge/chip.h
index 320bef0bdf..92223d1962 100644
--- a/src/soc/amd/stoneyridge/chip.h
+++ b/src/soc/amd/stoneyridge/chip.h
@@ -63,6 +63,15 @@ struct soc_amd_stoneyridge_config {
 	u8 stapm_percent;
 	u32 stapm_time_ms;
 	u32 stapm_power_mw;
+	/*
+	 * This specifies the LVDS/eDP power-up sequence time for the delay
+	 * between VaryBL and BLON.
+	 * 0 - Use the VBIOS default (default). The video BIOS default is 32ms.
+	 * n - Values other than zero specify a setting of (4 * n) milliseconds
+	 *     time delay.
+	 */
+	u8 lvds_poseq_varybl_to_blon;
+	u8 lvds_poseq_blon_to_varybl;
 };
 
 typedef struct soc_amd_stoneyridge_config config_t;