This patch adds automatic fan control for the CPU fan on the m57sli

board.

This is done via the ec_init routine in a source file in the
mainboard/gigabyte/m57sli directory. A Config variable 'HAVE_FANCTL' has been
added to notify superio.c to get the ec_init externally.

I (Ward) have tested this on the PLCC and the SOIC/SPI version of this board.
It works.

Signed-off-by: Ronald Hoogenboom <hoogenboom30@zonnet.nl>
Acked-by: Ward Vandewege <ward@gnu.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3116 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

5 files changed, 76 insertions, 0 deletions

diff --git a/src/config/Options.lb b/src/config/Options.lb
index 7b22ea8692..9ba5f32edd 100644
--- a/src/config/Options.lb
+++ b/src/config/Options.lb
@@ -861,6 +861,11 @@ end
 # Misc device options
 ###############################################
 
+define HAVE_FANCTL
+	default 0
+	export used
+	comment "Include board specific FAN control initialization"
+end
 define CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
 	default 0
 	export used
diff --git a/src/mainboard/gigabyte/m57sli/Config.lb b/src/mainboard/gigabyte/m57sli/Config.lb
index 5f34c9eeb5..127ce0309b 100644
--- a/src/mainboard/gigabyte/m57sli/Config.lb
+++ b/src/mainboard/gigabyte/m57sli/Config.lb
@@ -206,6 +206,10 @@ else
     end
 end
 
+if HAVE_FANCTL
+	object fanctl.o
+end
+
 ##
 ## Setup RAM
 ##
diff --git a/src/mainboard/gigabyte/m57sli/Options.lb b/src/mainboard/gigabyte/m57sli/Options.lb
index 149bbde94c..88d311bf24 100644
--- a/src/mainboard/gigabyte/m57sli/Options.lb
+++ b/src/mainboard/gigabyte/m57sli/Options.lb
@@ -115,6 +115,7 @@ uses WAIT_BEFORE_CPUS_INIT
 
 uses CONFIG_USE_PRINTK_IN_CAR
 
+uses HAVE_FANCTL
 ###
 ### Build options
 ###
@@ -140,6 +141,11 @@ default FAILOVER_SIZE=0x01000
 default CONFIG_LB_MEM_TOPK=2048
 
 ##
+## Set-up automatic fan control
+##
+default HAVE_FANCTL=1
+
+##
 ## Build code for the fallback boot
 ##
 default HAVE_FALLBACK_BOOT=1
diff --git a/src/mainboard/gigabyte/m57sli/fanctl.c b/src/mainboard/gigabyte/m57sli/fanctl.c
new file mode 100644
index 0000000000..8b74014dbd
--- /dev/null
+++ b/src/mainboard/gigabyte/m57sli/fanctl.c
@@ -0,0 +1,57 @@
+#include <arch/io.h>
+
+static void write_index(uint16_t port_base, uint8_t reg, uint8_t value)
+{
+	outb(reg, port_base);
+	outb(value, port_base + 1);
+}
+
+static const struct {
+	uint8_t index, value;
+} sequence[]= {
+	/* Set FAN_CTL control register (0x14) polarity to high, and
+	   activate fans 1, 2 and 3. */
+	{ 0x14, 0x87},
+	/* set the correct sensor types 1,2 thermistor; 3 diode */
+	{ 0x51, 0x1c},
+	/* set the 'zero' voltage for diode type sensor */
+	{ 0x5c, 0x80},
+//	{ 0x56, 0xe5},
+//	{ 0x57, 0xe5},
+	{ 0x59, 0xe5},
+	{ 0x5c, 0x00},
+	/* fan1 (controlled by temp3) control parameters */
+	/* fan off limit */
+	{ 0x60, 0xff},
+	/* fan start limit */
+	{ 0x61, 0x14},
+	/* ???? */
+//	{ 0x62, 0x00},
+	/* start PWM */
+	{ 0x63, 0x27},
+	/* smooth and slope PWM */
+	{ 0x64, 0x90},
+	/* direct-down and interval */
+	{ 0x65, 0x03},
+	/* fan1 auto controlled by temp3 */
+	{ 0x15, 0x82},
+	/* fan2 soft controlled, max speed */
+	{ 0x16, 0x7f},
+	/* fan3 soft controlled, 75% speed */
+	{ 0x17, 0x60},
+	/* all fans enable, fan1 ctl smart */
+	{ 0x13, 0x71}
+};
+
+#define ARRAYSIZE(x) sizeof x/sizeof *x
+
+/*
+ * Called from superio.c
+ */
+void init_ec(uint16_t base)
+{
+	int i;
+	for (i=0; i<ARRAYSIZE(sequence); i++) {
+		write_index(base, sequence[i].index, sequence[i].value);
+	}
+}
diff --git a/src/superio/ite/it8716f/superio.c b/src/superio/ite/it8716f/superio.c
index be78639b87..d0f0857e89 100644
--- a/src/superio/ite/it8716f/superio.c
+++ b/src/superio/ite/it8716f/superio.c
@@ -62,6 +62,9 @@ static uint8_t pnp_read_index(uint16_t port_base, uint8_t reg)
 	return inb(port_base + 1);
 }
 
+#ifdef HAVE_FANCTL
+extern void init_ec(uint16_t base);
+#else
 static void init_ec(uint16_t base)
 {
 	uint8_t value;
@@ -77,6 +80,7 @@ static void init_ec(uint16_t base)
 	printk_debug("FAN_CTL: reg = 0x%04x, writing value = 0x%02x\r\n",
 		     base + 0x14, value | 0x87);
 }
+#endif
 
 static void it8716f_init(device_t dev)
 {