Revision: linuxbios@linuxbios.org--devel/freebios--devel--2.0--patch-56

Creator:  Yinghai Lu <yhlu@tyan.com>

remove junk in s2885 cache_as_ram_auto.c 


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1974 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

12 files changed, 2138 insertions, 54 deletions

diff --git a/src/mainboard/tyan/s2885/cache_as_ram_auto.c b/src/mainboard/tyan/s2885/cache_as_ram_auto.c
index 9ca2c4dc7f..3d27071031 100644
--- a/src/mainboard/tyan/s2885/cache_as_ram_auto.c
+++ b/src/mainboard/tyan/s2885/cache_as_ram_auto.c
@@ -13,16 +13,6 @@
 #include "arch/i386/lib/console.c"
 #include "ram/ramtest.c"
 
-#if 0
-static void post_code(uint8_t value) {
-#if 1
-        int i;
-        for(i=0;i<0x80000;i++) {
-                outb(value, 0x80);
-        }
-#endif
-}
-#endif
 
 #include "northbridge/amd/amdk8/cpu_rev.c"
 #define K8_HT_FREQ_1G_SUPPORT 0
@@ -156,7 +146,6 @@ void amd64_main(unsigned long bist)
         }
 
         /* Is this a secondary cpu? */
-//        post_code(0x21);
         if (!boot_cpu()) {
                 if (last_boot_normal()) {
                         goto normal_image;
@@ -170,11 +159,9 @@ void amd64_main(unsigned long bist)
 
         enumerate_ht_chain();
 
-        /* Setup the ck804 */
         amd8111_enable_rom();
 
         /* Is this a deliberate reset by the bios */
-//        post_code(0x22);
         if (bios_reset_detected() && last_boot_normal()) {
                 goto normal_image;
         }
@@ -186,13 +173,11 @@ void amd64_main(unsigned long bist)
                 goto fallback_image;
         }
  normal_image:
-//        post_code(0x23);
         __asm__ volatile ("jmp __normal_image"
                 : /* outputs */
                 : "a" (bist) /* inputs */
                 );
  cpu_reset:
-//        post_code(0x24);
 #if 0
         //CPU reset will reset memtroller ???
         asm volatile ("jmp __cpu_reset" 
@@ -202,7 +187,6 @@ void amd64_main(unsigned long bist)
 #endif
 
  fallback_image:
-//        post_code(0x25);
         real_main(bist);
 }
 void real_main(unsigned long bist)
@@ -265,7 +249,6 @@ void amd64_main(unsigned long bist)
                 enable_lapic();
                 init_timer();
 
-//                post_code(0x30);
 
 #if CONFIG_LOGICAL_CPUS==1
         #if ENABLE_APIC_EXT_ID == 1
@@ -276,12 +259,10 @@ void amd64_main(unsigned long bist)
         #endif
                 if(id.coreid == 0) {
                         if (cpu_init_detected(id.nodeid)) {
-//                                __asm__ volatile ("jmp __cpu_reset");
 				cpu_reset = 1;
 				goto cpu_reset_x;
                         }
                         distinguish_cpu_resets(id.nodeid);
-//                        start_other_core(id.nodeid);
                 }
 #else
         #if ENABLE_APIC_EXT_ID == 1
@@ -292,14 +273,12 @@ void amd64_main(unsigned long bist)
 
         #endif
                 if (cpu_init_detected(nodeid)) {
-//                        __asm__ volatile ("jmp __cpu_reset");
 			cpu_reset = 1;
 			goto cpu_reset_x;
                 }
                 distinguish_cpu_resets(nodeid);
 #endif
 
-//                post_code(0x31);
 
                 if (!boot_cpu()
 #if CONFIG_LOGICAL_CPUS==1 
@@ -312,13 +291,11 @@ void amd64_main(unsigned long bist)
                 }
         }
 
-//	post_code(0x32);
 	
  	w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
         uart_init();
         console_init();
 
-//	dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE);
 	
 	/* Halt if there was a built in self test failure */
 	report_bist_failure(bist);
@@ -332,17 +309,9 @@ void amd64_main(unsigned long bist)
 	needs_reset = setup_coherent_ht_domain();
 	
 #if CONFIG_LOGICAL_CPUS==1
-        // It is said that we should start core1 after all core0 launched
         start_other_cores();
 #endif
-#if 0
-
-	// You need to preset bus num in PCI_DEV(0, 0x18,1) 0xe0, 0xe4, 0xe8, 0xec
-        needs_reset |= ht_setup_chains(2);
-#else
-	// automatically set that for you, but you might meet tight space
         needs_reset |= ht_setup_chains_x();
-#endif
 
        	if (needs_reset) {
                	print_info("ht reset -\r\n");
@@ -360,29 +329,6 @@ void amd64_main(unsigned long bist)
 	memreset_setup();
 	sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
 
-#if 0
-	dump_pci_devices();
-#endif
-
-        /* Check all of memory */
-#if 0
-        msr_t msr;
-        msr = rdmsr(TOP_MEM2);
-        print_debug("TOP_MEM2: ");
-        print_debug_hex32(msr.hi);
-        print_debug_hex32(msr.lo);
-        print_debug("\r\n");
-#endif
-#if 0
-        ram_check(0x00000000, msr.lo+(msr.hi<<32));
-#endif
-
-#if 0
-        // Check 16MB of memory @ 0
-        ram_check(0x00000000, 0x00100000);
-        // Check 16MB of memory @ 2GB 
-        ram_check(0x80000000, 0x80100000);
-#endif
 
 #if 1
         {
diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb
new file mode 100644
index 0000000000..700fb43d4b
--- /dev/null
+++ b/src/mainboard/tyan/s4880/Config.lb
@@ -0,0 +1,293 @@
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+	default ROM_SECTION_SIZE   = FALLBACK_SIZE
+	default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+	default ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE )
+	default ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+default CONFIG_ROM_STREAM     = 1
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE      = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=65536
+default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+arch i386 end 
+
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_PIRQ_TABLE object irq_tables.o end
+//object reset.o
+if USE_DCACHE_RAM
+
+	if CONFIG_USE_INIT
+
+		makerule ./auto.o
+        		depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+	        	action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o"
+		end
+
+	else
+
+		makerule ./auto.inc
+        		depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+		        action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+        		action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+		        action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+			end
+	end
+else
+
+	##
+	## Romcc output
+	##
+	makerule ./failover.E
+        	depends "$(MAINBOARD)/failover.c ./romcc"
+	        action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+	end
+
+	makerule ./failover.inc
+	        depends "$(MAINBOARD)/failover.c ./romcc"
+        	action "./romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+	end
+
+	makerule ./auto.E
+        	depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+	        action  "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+	end
+
+	makerule ./auto.inc
+        	depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+	        action  "./romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+	end
+
+	##
+	## Setup RAM
+	##
+	mainboardinit cpu/x86/fpu/enable_fpu.inc
+	mainboardinit cpu/x86/mmx/enable_mmx.inc
+	mainboardinit cpu/x86/sse/enable_sse.inc
+	mainboardinit ./auto.inc
+	mainboardinit cpu/x86/sse/disable_sse.inc
+	mainboardinit cpu/x86/mmx/disable_mmx.inc
+	mainboardinit arch/i386/lib/jmp_auto_out.inc
+
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+if USE_DCACHE_RAM
+        if CONFIG_USE_INIT
+                ldscript /cpu/x86/32bit/entry32.lds
+        end
+
+        if CONFIG_USE_INIT
+                ldscript /cpu/amd/car/cache_as_ram.lds
+        end
+end
+
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+if USE_FALLBACK_IMAGE 
+	mainboardinit cpu/x86/16bit/reset16.inc 
+	ldscript /cpu/x86/16bit/reset16.lds 
+else
+	mainboardinit cpu/x86/32bit/reset32.inc 
+	ldscript /cpu/x86/32bit/reset32.lds 
+end
+
+if USE_DCACHE_RAM
+else
+	### Should this be in the northbridge code?
+	mainboardinit arch/i386/lib/cpu_reset.inc
+end
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+
+if USE_DCACHE_RAM
+	##
+	## Setup Cache-As-Ram
+	##
+	mainboardinit cpu/amd/car/cache_as_ram.inc
+end
+
+###
+### This is the early phase of linuxBIOS startup 
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if USE_FALLBACK_IMAGE
+	if USE_DCACHE_RAM
+		ldscript /arch/i386/lib/failover.lds
+	else
+       		ldscript /arch/i386/lib/failover.lds
+	        mainboardinit ./failover.inc
+	end
+end
+
+##
+## Setup RAM
+##
+if USE_DCACHE_RAM
+
+	if CONFIG_USE_INIT
+		initobject auto.o
+	else
+		mainboardinit ./auto.inc
+	end
+
+else
+
+	# ROMCC
+	mainboardinit arch/i386/lib/jmp_auto.inc
+
+end
+
+##
+## Include the secondary Configuration files 
+##
+if CONFIG_CHIP_NAME
+	config chip.h
+end
+
+# sample config for tyan/s4880
+chip northbridge/amd/amdk8/root_complex
+        device apic_cluster 0 on
+                chip cpu/amd/socket_940
+                        device apic 0 on end
+                end
+        end
+
+	device pci_domain 0 on
+		chip northbridge/amd/amdk8
+			device pci 18.0 on end # LDT0
+			device pci 18.0 on end # LDT1
+			device pci 18.0 on #  northbridge 
+				#  devices on link 2, link 2 == LDT 2
+				chip southbridge/amd/amd8131
+					# the on/off keyword is mandatory
+                                        device pci 0.0 on
+#                                                chip drivers/lsi/53c1030
+#                                                        device pci 4.0 on end
+#                                                        device pci 4.1 on end
+#                                                        register "fw_address" = "0xfff8c000"
+#                                                end
+                                                chip drivers/pci/onboard
+                                                        device pci 9.0 on end
+                                                        device pci 9.1 on end
+                                                end
+					end
+					device pci 0.1 on end
+					device pci 1.0 on end
+					device pci 1.1 on end
+				end
+				chip southbridge/amd/amd8111
+					# this "device pci 0.0" is the parent the next one
+					# PCI bridge
+					device pci 0.0 on
+						device pci 0.0 on end
+						device pci 0.1 on end
+						device pci 0.2 off end
+						device pci 1.0 off end
+                                                chip drivers/pci/onboard
+                                                        device pci 6.0 on end
+                                                        register "rom_address" = "0xfff80000"
+                                                end
+					end
+					device pci 1.0 on
+						chip superio/winbond/w83627hf
+							device pnp 2e.0 on #  Floppy
+                	                 			io 0x60 = 0x3f0
+                	                			irq 0x70 = 6
+                	                			drq 0x74 = 2
+							end
+                	        			device pnp 2e.1 off #  Parallel Port
+                	                 			io 0x60 = 0x378
+                	                			irq 0x70 = 7
+							end
+                	        			device pnp 2e.2 on #  Com1
+                	                 			io 0x60 = 0x3f8
+                	                			irq 0x70 = 4
+							end
+                	        			device pnp 2e.3 off #  Com2
+                	                 			io 0x60 = 0x2f8
+                	                			irq 0x70 = 3
+							end
+                	        			device pnp 2e.5 on #  Keyboard
+                	                 			io 0x60 = 0x60
+                	                 			io 0x62 = 0x64
+                	                			irq 0x70 = 1
+								irq 0x72 = 12
+							end
+                	                                device pnp 2e.6 off #  CIR
+                	                                        io 0x60 = 0x100
+                	                                end
+                	                                device pnp 2e.7 off #  GAME_MIDI_GIPO1
+                	                                        io 0x60 = 0x220
+                	                                        io 0x62 = 0x300
+                	                                        irq 0x70 = 9
+                	                                end  
+                	                                device pnp 2e.8 off end #  GPIO2
+                	                                device pnp 2e.9 off end #  GPIO3
+                	                                device pnp 2e.a off end #  ACPI
+                	                                device pnp 2e.b on #  HW Monitor
+                	                                        io 0x60 = 0x290
+                	                                        irq 0x70 = 5
+                	                                end
+						end
+					end
+					device pci 1.1 on end
+					device pci 1.2 on end
+					device pci 1.3 on end
+					device pci 1.5 off end
+					device pci 1.6 off end
+                                        register "ide0_enable" = "1"
+                                        register "ide1_enable" = "1"
+				end
+			end #  device pci 18.0 
+			
+			device pci 18.1 on end
+			device pci 18.2 on end
+			device pci 18.3 on end
+		end
+
+	end #pci_domain
+end
+
diff --git a/src/mainboard/tyan/s4880/Options.lb b/src/mainboard/tyan/s4880/Options.lb
new file mode 100644
index 0000000000..f3d73515ee
--- /dev/null
+++ b/src/mainboard/tyan/s4880/Options.lb
@@ -0,0 +1,256 @@
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses USE_FALLBACK_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_HARD_RESET
+uses HARD_RESET_BUS
+uses HARD_RESET_DEVICE
+uses HARD_RESET_FUNCTION
+uses IRQ_SLOT_COUNT
+uses HAVE_OPTION_TABLE
+uses CONFIG_MAX_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
+uses CONFIG_LOGICAL_CPUS
+uses CONFIG_IOAPIC
+uses CONFIG_SMP
+uses FALLBACK_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_STREAM
+uses CONFIG_ROM_STREAM_START
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses STACK_SIZE
+uses HEAP_SIZE
+uses USE_OPTION_TABLE
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
+uses MAINBOARD
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses LINUXBIOS_EXTRA_VERSION
+uses _RAMBASE
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_CONSOLE_SERIAL8250
+uses HAVE_INIT_TIMER
+uses CONFIG_GDB_STUB
+uses CONFIG_GDB_STUB
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+uses CONFIG_CHIP_NAME
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_PCI_ROM_RUN
+uses K8_E0_MEM_HOLE_SIZEK
+
+uses USE_DCACHE_RAM
+uses DCACHE_RAM_BASE
+uses DCACHE_RAM_SIZE
+uses CONFIG_USE_INIT
+
+###
+### Build options
+###
+
+##
+## ROM_SIZE is the size of boot ROM that this board will use.
+##
+default ROM_SIZE=524288
+
+##
+## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
+##
+default FALLBACK_SIZE=131072
+
+##
+## Build code for the fallback boot
+##
+default HAVE_FALLBACK_BOOT=1
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+default HAVE_HARD_RESET=1
+
+##
+## Funky hard reset implementation
+##
+default HARD_RESET_BUS=3
+default HARD_RESET_DEVICE=4
+default HARD_RESET_FUNCTION=0
+
+
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=1
+default IRQ_SLOT_COUNT=22
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+default HAVE_MP_TABLE=1
+
+##
+## Build code to export a CMOS option table
+##
+default HAVE_OPTION_TABLE=1
+
+##
+## Move the default LinuxBIOS cmos range off of AMD RTC registers
+##
+default LB_CKS_RANGE_START=49
+default LB_CKS_RANGE_END=122
+default LB_CKS_LOC=123
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+##
+default CONFIG_SMP=1
+default CONFIG_MAX_CPUS=8
+default CONFIG_MAX_PHYSICAL_CPUS=4
+default CONFIG_LOGICAL_CPUS=1
+
+#CHIP_NAME ?
+default CONFIG_CHIP_NAME=1
+
+#1G memory hole
+default K8_E0_MEM_HOLE_SIZEK=0x100000
+
+#VGA Console
+default CONFIG_CONSOLE_VGA=1
+default CONFIG_PCI_ROM_RUN=1
+
+
+##
+## enable CACHE_AS_RAM specifics
+##
+default USE_DCACHE_RAM=1
+default DCACHE_RAM_BASE=0xcf000
+default DCACHE_RAM_SIZE=0x1000
+default CONFIG_USE_INIT=1
+
+##
+## Build code to setup a generic IOAPIC
+##
+default CONFIG_IOAPIC=1
+
+##
+## Clean up the motherboard id strings
+##
+default MAINBOARD_VENDOR="Tyan"
+default MAINBOARD_PART_NUMBER="s4880"
+default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
+default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x4880
+
+###
+### LinuxBIOS layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+default ROM_IMAGE_SIZE = 65536
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+default HEAP_SIZE=0x4000
+
+##
+## Only use the option table in a normal image
+##
+default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+
+##
+## LinuxBIOS C code runs at this location in RAM
+##
+default _RAMBASE=0x00004000
+
+##
+## Load the payload from the ROM
+##
+default CONFIG_ROM_STREAM = 1
+
+###
+### Defaults of options that you may want to override in the target config file
+### 
+
+##
+## The default compiler
+##
+default CC="$(CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## Disable the gdb stub by default
+## 
+default CONFIG_GDB_STUB=0
+
+##
+## The Serial Console
+##
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default TTYS0_BAUD=115200
+#default TTYS0_BAUD=57600
+#default TTYS0_BAUD=38400
+#default TTYS0_BAUD=19200
+#default TTYS0_BAUD=9600
+#default TTYS0_BAUD=4800
+#default TTYS0_BAUD=2400
+#default TTYS0_BAUD=1200
+
+# Select the serial console base port
+default TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default TTYS0_LCS=0x3
+
+##
+### Select the linuxBIOS loglevel
+##
+## EMERG      1   system is unusable               
+## ALERT      2   action must be taken immediately 
+## CRIT       3   critical conditions              
+## ERR        4   error conditions                 
+## WARNING    5   warning conditions               
+## NOTICE     6   normal but significant condition 
+## INFO       7   informational                    
+## DEBUG      8   debug-level messages             
+## SPEW       9   Way too many details             
+
+## Request this level of debugging output
+default  DEFAULT_CONSOLE_LOGLEVEL=8
+## At a maximum only compile in this level of debugging
+default  MAXIMUM_CONSOLE_LOGLEVEL=8
+
+##
+## Select power on after power fail setting
+default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+
+### End Options.lb
+end
diff --git a/src/mainboard/tyan/s4880/auto.c b/src/mainboard/tyan/s4880/auto.c
new file mode 100644
index 0000000000..fc1bf58e91
--- /dev/null
+++ b/src/mainboard/tyan/s4880/auto.c
@@ -0,0 +1,332 @@
+#define ASSEMBLY 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include <arch/cpu.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+#include "northbridge/amd/amdk8/incoherent_ht.c"
+#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
+#include "northbridge/amd/amdk8/raminit.h"
+#include "cpu/amd/model_fxx/apic_timer.c"
+#include "lib/delay.c"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+#include "northbridge/amd/amdk8/debug.c"
+#include "northbridge/amd/amdk8/cpu_rev.c"
+#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/bist.h"
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+
+/* Look up a which bus a given node/link combination is on.
+ * return 0 when we can't find the answer.
+ */
+static unsigned node_link_to_bus(unsigned node, unsigned link)
+{
+        unsigned reg;
+        
+        for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
+                unsigned config_map;
+                config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
+                if ((config_map & 3) != 3) {
+                        continue; 
+                }       
+                if ((((config_map >> 4) & 7) == node) &&
+                        (((config_map >> 8) & 3) == link))
+                {       
+                        return (config_map >> 16) & 0xff;
+                }       
+        }       
+        return 0;
+}       
+
+static void hard_reset(void)
+{
+        device_t dev;
+
+        /* Find the device */
+        dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 3);
+
+        set_bios_reset();
+
+        /* enable cf9 */
+        pci_write_config8(dev, 0x41, 0xf1);
+        /* reset */
+        outb(0x0e, 0x0cf9);
+}
+
+static void soft_reset(void)
+{
+        device_t dev;
+
+        /* Find the device */
+        dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 0);
+
+        set_bios_reset();
+        pci_write_config8(dev, 0x47, 1);
+}
+
+static void memreset_setup(void)
+{
+   if (is_cpu_pre_c0()) {
+        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=0
+   }
+   else {
+        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=1
+   }
+        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); 
+}
+
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+   if (is_cpu_pre_c0()) {
+        udelay(800);
+        outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
+        udelay(90);
+   }
+}
+
+#if 0
+static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes)
+{
+	/* Routing Table Node i 
+	 *
+	 * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c 
+	 *  i:    0,    1,    2,    3,    4,    5,    6,    7
+	 *
+	 * [ 0: 3] Request Route
+	 *     [0] Route to this node
+	 *     [1] Route to Link 0
+	 *     [2] Route to Link 1
+	 *     [3] Route to Link 2
+	 * [11: 8] Response Route
+	 *     [0] Route to this node
+	 *     [1] Route to Link 0
+	 *     [2] Route to Link 1
+	 *     [3] Route to Link 2
+	 * [19:16] Broadcast route
+	 *     [0] Route to this node
+	 *     [1] Route to Link 0
+	 *     [2] Route to Link 1
+	 *     [3] Route to Link 2
+	 */
+        uint32_t ret=0x00010101; /* default row entry */
+
+/*
+            (L1)       (L2)     
+        CPU3-------------CPU1
+     (L0)|                |(L0)
+         |                |
+         |                |
+         |                |
+         |                |
+     (L0)|                |(L0)
+        CPU2-------------CPU0---------8131----------8111
+            (L2)       (L1)  (L2)       
+*/
+
+        /* Link0 of CPU0 to Link0 of CPU1 */
+        /* Link1 of CPU0 to Link2 of CPU2 */
+        /* Link2 of CPU1 to Link1 of CPU3 */
+        /* Link0 of CPU2 to Link0 of CPU3 */
+
+        static const unsigned int rows_4p[4][4] = {
+                { 0x00070101, 0x00010202, 0x00030404, 0x00010204 },
+                { 0x00010202, 0x000b0101, 0x00010208, 0x00030808 },
+                { 0x00030808, 0x00010208, 0x000b0101, 0x00010202 },
+                { 0x00010204, 0x00030404, 0x00010202, 0x00070101 }
+        };
+        
+        if (!(node>=maxnodes || row>=maxnodes)) {
+		ret=rows_4p[node][row];
+        }
+
+        return ret;
+}
+#endif
+
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+#define SMBUS_HUB 0x18
+        unsigned device=(ctrl->channel0[0])>>8;
+        smbus_write_byte(SMBUS_HUB , 0x01, device);
+        smbus_write_byte(SMBUS_HUB , 0x03, 0);
+}
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+	return smbus_read_byte(device, address);
+}
+
+#include "northbridge/amd/amdk8/setup_resource_map.c"
+#include "northbridge/amd/amdk8/raminit.c"
+
+#include "northbridge/amd/amdk8/coherent_ht.c"
+#include "sdram/generic_sdram.c"
+
+ /* tyan does not want the default */
+#include "resourcemap.c"
+
+#if CONFIG_LOGICAL_CPUS==1
+#define SET_NB_CFG_54 1
+#include "cpu/amd/dualcore/dualcore.c"
+#endif
+
+#define FIRST_CPU  1
+#define SECOND_CPU 1
+
+#define THIRD_CPU  1 
+#define FOURTH_CPU 1 
+
+#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU + THIRD_CPU + FOURTH_CPU)
+
+#define RC0 ((1<<1)<<8)
+#define RC1 ((1<<2)<<8)
+#define RC2 ((1<<3)<<8)
+#define RC3 ((1<<4)<<8)
+
+#define DIMM0 0x50
+#define DIMM1 0x51
+#define DIMM2 0x52
+#define DIMM3 0x53
+        
+static void main(unsigned long bist)
+{
+	static const struct mem_controller cpu[] = {
+#if FIRST_CPU
+                {
+                        .node_id = 0,
+                        .f0 = PCI_DEV(0, 0x18, 0),
+                        .f1 = PCI_DEV(0, 0x18, 1),
+                        .f2 = PCI_DEV(0, 0x18, 2),
+                        .f3 = PCI_DEV(0, 0x18, 3),
+                        .channel0 = { RC0|DIMM0, RC0|DIMM2, 0, 0 },
+                        .channel1 = { RC0|DIMM1, RC0|DIMM3, 0, 0 },
+                },
+#endif
+#if SECOND_CPU
+                {
+                        .node_id = 1,
+                        .f0 = PCI_DEV(0, 0x19, 0),
+                        .f1 = PCI_DEV(0, 0x19, 1),
+                        .f2 = PCI_DEV(0, 0x19, 2),
+                        .f3 = PCI_DEV(0, 0x19, 3),
+                        .channel0 = { RC1|DIMM0, 0 , 0, 0 },
+                        .channel1 = { RC1|DIMM1, 0, 0, 0 },
+
+                },
+#endif
+
+#if THIRD_CPU
+                {
+                        .node_id = 2,
+                        .f0 = PCI_DEV(0, 0x1a, 0),
+                        .f1 = PCI_DEV(0, 0x1a, 1),
+                        .f2 = PCI_DEV(0, 0x1a, 2),
+                        .f3 = PCI_DEV(0, 0x1a, 3),
+                        .channel0 = { RC2|DIMM0, 0, 0, 0 },
+                        .channel1 = { RC2|DIMM1, 0, 0, 0 },
+
+                },
+#endif
+#if FOURTH_CPU
+                {
+                        .node_id = 3,
+                        .f0 = PCI_DEV(0, 0x1b, 0),
+                        .f1 = PCI_DEV(0, 0x1b, 1),
+                        .f2 = PCI_DEV(0, 0x1b, 2),
+                        .f3 = PCI_DEV(0, 0x1b, 3),
+                        .channel0 = { RC3|DIMM0, 0, 0, 0 },
+                        .channel1 = { RC3|DIMM1, 0, 0, 0 },
+
+                },
+#endif
+	};
+	int i;
+        int needs_reset;
+#if CONFIG_LOGICAL_CPUS==1
+        struct node_core_id id;
+#else
+        unsigned nodeid;
+#endif
+
+        if (bist == 0) {
+                /* Skip this if there was a built in self test failure */
+                amd_early_mtrr_init();
+
+#if CONFIG_LOGICAL_CPUS==1
+                set_apicid_cpuid_lo();
+#endif
+
+                enable_lapic();
+                init_timer();
+
+#if CONFIG_LOGICAL_CPUS==1
+                id = get_node_core_id_x();
+                if(id.coreid == 0) {
+                        if (cpu_init_detected(id.nodeid)) {
+                                asm volatile ("jmp __cpu_reset");
+                        }
+                        distinguish_cpu_resets(id.nodeid);
+//                        start_other_core(id.nodeid);
+                }
+#else
+                nodeid = lapicid();
+                if (cpu_init_detected(nodeid)) {
+                        asm volatile ("jmp __cpu_reset");
+                }
+                distinguish_cpu_resets(nodeid);
+#endif
+
+                if (!boot_cpu()
+#if CONFIG_LOGICAL_CPUS==1 
+                        || (id.coreid != 0)
+#endif
+                ) {
+                        stop_this_cpu(); // it will stop all cores except core0 of cpu0
+                }
+        }
+
+        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+        uart_init();    
+        console_init(); 
+                
+        /* Halt if there was a built in self test failure */
+	report_bist_failure(bist);
+
+        setup_s4880_resource_map();
+
+        needs_reset = setup_coherent_ht_domain();
+
+#if CONFIG_LOGICAL_CPUS==1
+        // It is said that we should start core1 after all core0 launched
+        start_other_cores();
+#endif
+
+#if 0
+        needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xc0);
+#else
+        // automatically set that for you, but you might meet tight space
+        needs_reset |= ht_setup_chains_x();
+#endif
+	
+        if (needs_reset) {
+                print_info("ht reset -\r\n");
+                soft_reset();
+        }
+	
+	enable_smbus();
+
+	memreset_setup();
+	sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
+
+}
diff --git a/src/mainboard/tyan/s4880/cache_as_ram_auto.c b/src/mainboard/tyan/s4880/cache_as_ram_auto.c
new file mode 100644
index 0000000000..f39ff15b4d
--- /dev/null
+++ b/src/mainboard/tyan/s4880/cache_as_ram_auto.c
@@ -0,0 +1,484 @@
+#define ASSEMBLY 1
+#define __ROMCC__
+ 
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+
+#include "northbridge/amd/amdk8/cpu_rev.c"
+#define K8_HT_FREQ_1G_SUPPORT 0
+#include "northbridge/amd/amdk8/incoherent_ht.c"
+#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
+#include "northbridge/amd/amdk8/raminit.h"
+#include "cpu/amd/model_fxx/apic_timer.c"
+#include "lib/delay.c"
+
+#if CONFIG_USE_INIT == 0
+#include "lib/memcpy.c"
+#endif
+
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+#include "northbridge/amd/amdk8/debug.c"
+#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
+
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/bist.h"
+
+#include "northbridge/amd/amdk8/setup_resource_map.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+
+/* Look up a which bus a given node/link combination is on.
+ * return 0 when we can't find the answer.
+ */
+static unsigned node_link_to_bus(unsigned node, unsigned link)
+{
+        unsigned reg;
+        
+        for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
+                unsigned config_map;
+                config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
+                if ((config_map & 3) != 3) {
+                        continue; 
+                }       
+                if ((((config_map >> 4) & 7) == node) &&
+                        (((config_map >> 8) & 3) == link))
+                {       
+                        return (config_map >> 16) & 0xff;
+                }       
+        }       
+        return 0;
+}       
+
+static void hard_reset(void)
+{
+        device_t dev;
+
+        /* Find the device */
+        dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 3);
+
+        set_bios_reset();
+
+        /* enable cf9 */
+        pci_write_config8(dev, 0x41, 0xf1);
+        /* reset */
+        outb(0x0e, 0x0cf9);
+}
+
+static void soft_reset(void)
+{
+        device_t dev;
+
+        /* Find the device */
+        dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 0);
+
+        set_bios_reset();
+        pci_write_config8(dev, 0x47, 1);
+}
+
+static void memreset_setup(void)
+{
+   if (is_cpu_pre_c0()) {
+        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=0
+   }
+   else {
+        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=1
+   }
+        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
+}
+
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+   if (is_cpu_pre_c0()) {
+        udelay(800);
+        outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
+        udelay(90);
+   }
+}
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+#define SMBUS_HUB 0x18
+        int ret;
+        unsigned device=(ctrl->channel0[0])>>8;
+        smbus_write_byte(SMBUS_HUB, 0x01, device);
+        smbus_write_byte(SMBUS_HUB, 0x03, 0);
+}
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+	return smbus_read_byte(device, address);
+}
+
+#define K8_4RANK_DIMM_SUPPORT 1
+
+#include "northbridge/amd/amdk8/raminit.c"
+#if 0
+        #define ENABLE_APIC_EXT_ID 1
+        #define APIC_ID_OFFSET 0x10
+        #define LIFT_BSP_APIC_ID 0
+#else 
+        #define ENABLE_APIC_EXT_ID 0
+#endif
+#include "northbridge/amd/amdk8/coherent_ht.c"
+#include "sdram/generic_sdram.c"
+
+ /* tyan does not want the default */
+#include "resourcemap.c" 
+
+#if CONFIG_LOGICAL_CPUS==1
+#define SET_NB_CFG_54 1
+#include "cpu/amd/dualcore/dualcore.c"
+#else
+#include "cpu/amd/model_fxx/node_id.c"
+#endif
+#define FIRST_CPU  1
+#define SECOND_CPU 1
+
+#define THIRD_CPU  1 
+#define FOURTH_CPU 1 
+
+#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU + THIRD_CPU + FOURTH_CPU)
+
+#define RC0 ((1<<2)<<8)
+#define RC1 ((1<<1)<<8)
+#define RC2 ((1<<4)<<8)
+#define RC3 ((1<<3)<<8)
+
+#define DIMM0 0x50
+#define DIMM1 0x51
+#define DIMM2 0x52
+#define DIMM3 0x53
+
+#include "cpu/amd/car/copy_and_run.c"
+
+#if USE_FALLBACK_IMAGE == 1
+
+#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
+#include "northbridge/amd/amdk8/early_ht.c"
+
+void real_main(unsigned long bist);
+
+void amd64_main(unsigned long bist)
+{
+#if CONFIG_LOGICAL_CPUS==1
+        struct node_core_id id;
+#else
+        unsigned nodeid;
+#endif
+        /* Make cerain my local apic is useable */
+//        enable_lapic();
+
+#if CONFIG_LOGICAL_CPUS==1
+        id = get_node_core_id_x();
+        /* Is this a cpu only reset? */
+        if (cpu_init_detected(id.nodeid)) {
+#else
+//        nodeid = lapicid();
+	nodeid = get_node_id();
+        /* Is this a cpu only reset? */
+        if (cpu_init_detected(nodeid)) {
+#endif
+                if (last_boot_normal()) {
+                        goto normal_image;
+                } else {
+                        goto cpu_reset;
+                }
+        }
+
+        /* Is this a secondary cpu? */
+        if (!boot_cpu()) {
+                if (last_boot_normal()) {
+                        goto normal_image;
+                } else {
+                        goto fallback_image;
+                }
+        }
+
+        /* Nothing special needs to be done to find bus 0 */
+        /* Allow the HT devices to be found */
+
+        enumerate_ht_chain();
+
+        /* Setup the ck804 */
+        amd8111_enable_rom();
+
+        /* Is this a deliberate reset by the bios */
+        if (bios_reset_detected() && last_boot_normal()) {
+                goto normal_image;
+        }
+        /* This is the primary cpu how should I boot? */
+        else if (do_normal_boot()) {
+                goto normal_image;
+        }
+        else {
+                goto fallback_image;
+        }
+ normal_image:
+        __asm__ volatile ("jmp __normal_image"
+                : /* outputs */
+                : "a" (bist) /* inputs */
+                );
+ cpu_reset:
+#if 0
+        //CPU reset will reset memtroller ???
+        asm volatile ("jmp __cpu_reset" 
+                : /* outputs */ 
+                : "a"(bist) /* inputs */
+                );
+#endif
+
+ fallback_image:
+        real_main(bist);
+}
+void real_main(unsigned long bist)
+#else
+void amd64_main(unsigned long bist)
+#endif
+{
+	static const struct mem_controller cpu[] = {
+#if FIRST_CPU
+                {
+                        .node_id = 0,
+                        .f0 = PCI_DEV(0, 0x18, 0),
+                        .f1 = PCI_DEV(0, 0x18, 1),
+                        .f2 = PCI_DEV(0, 0x18, 2),
+                        .f3 = PCI_DEV(0, 0x18, 3),
+                        .channel0 = { RC0|DIMM0, RC0|DIMM2, 0, 0 },
+                        .channel1 = { RC0|DIMM1, RC0|DIMM3, 0, 0 },
+                },
+#endif
+#if SECOND_CPU
+                {
+                        .node_id = 1,
+                        .f0 = PCI_DEV(0, 0x19, 0),
+                        .f1 = PCI_DEV(0, 0x19, 1),
+                        .f2 = PCI_DEV(0, 0x19, 2),
+                        .f3 = PCI_DEV(0, 0x19, 3),
+                        .channel0 = { RC1|DIMM0, RC1|DIMM2 , 0, 0 },
+                        .channel1 = { RC1|DIMM1, RC1|DIMM3 , 0, 0 },
+
+                },
+#endif
+
+#if THIRD_CPU
+                {
+                        .node_id = 2,
+                        .f0 = PCI_DEV(0, 0x1a, 0),
+                        .f1 = PCI_DEV(0, 0x1a, 1),
+                        .f2 = PCI_DEV(0, 0x1a, 2),
+                        .f3 = PCI_DEV(0, 0x1a, 3),
+                        .channel0 = { RC2|DIMM0, RC2|DIMM2, 0, 0 },
+                        .channel1 = { RC2|DIMM1, RC2|DIMM3, 0, 0 },
+
+                },
+#endif
+#if FOURTH_CPU
+                {
+                        .node_id = 3,
+                        .f0 = PCI_DEV(0, 0x1b, 0),
+                        .f1 = PCI_DEV(0, 0x1b, 1),
+                        .f2 = PCI_DEV(0, 0x1b, 2),
+                        .f3 = PCI_DEV(0, 0x1b, 3),
+                        .channel0 = { RC3|DIMM0, RC3|DIMM2, 0, 0 },
+                        .channel1 = { RC3|DIMM1, RC3|DIMM3, 0, 0 },
+
+                },
+#endif
+	};
+
+        int needs_reset;
+	unsigned cpu_reset = 0;
+
+        if (bist == 0) {
+#if CONFIG_LOGICAL_CPUS==1
+        	struct node_core_id id;
+#else
+	        unsigned nodeid;
+#endif
+                /* Skip this if there was a built in self test failure */
+//                amd_early_mtrr_init(); # don't need, already done in cache_as_ram
+
+#if CONFIG_LOGICAL_CPUS==1
+                set_apicid_cpuid_lo();
+		id = get_node_core_id_x(); // that is initid
+        #if ENABLE_APIC_EXT_ID == 1
+                if(id.coreid == 0) {
+                        enable_apic_ext_id(id.nodeid);
+                }
+        #endif
+#else
+                nodeid = get_node_id();
+        #if ENABLE_APIC_EXT_ID == 1
+                enable_apic_ext_id(nodeid);
+        #endif
+#endif
+
+                enable_lapic();
+                init_timer();
+
+
+#if CONFIG_LOGICAL_CPUS==1
+        #if ENABLE_APIC_EXT_ID == 1
+            #if LIFT_BSP_APIC_ID == 0
+                if( id.nodeid != 0 ) //all except cores in node0
+            #endif
+                        lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) );
+        #endif
+                if(id.coreid == 0) {
+                        if (cpu_init_detected(id.nodeid)) {
+				cpu_reset = 1;
+				goto cpu_reset_x;
+                        }
+                        distinguish_cpu_resets(id.nodeid);
+                }
+#else
+        #if ENABLE_APIC_EXT_ID == 1
+            #if LIFT_BSP_APIC_ID == 0
+                if(nodeid != 0)
+            #endif
+                        lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10
+
+        #endif
+                if (cpu_init_detected(nodeid)) {
+			cpu_reset = 1;
+			goto cpu_reset_x;
+                }
+                distinguish_cpu_resets(nodeid);
+#endif
+
+
+                if (!boot_cpu()
+#if CONFIG_LOGICAL_CPUS==1 
+                        || (id.coreid != 0)
+#endif
+                ) {
+			// We need stop the CACHE as RAM for this CPU too
+			#include "cpu/amd/car/cache_as_ram_post.c"
+                        stop_this_cpu(); // it will stop all cores except core0 of cpu0
+                }
+        }
+
+	
+ 	w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+        uart_init();
+        console_init();
+
+	/* Halt if there was a built in self test failure */
+	report_bist_failure(bist);
+
+        setup_s4880_resource_map();
+
+	needs_reset = setup_coherent_ht_domain();
+	
+#if CONFIG_LOGICAL_CPUS==1
+        start_other_cores();
+#endif
+
+        needs_reset |= ht_setup_chains_x();
+
+       	if (needs_reset) {
+               	print_info("ht reset -\r\n");
+               	soft_reset();
+       	}
+
+	enable_smbus();
+
+	memreset_setup();
+	sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
+
+
+#if 1
+        {
+        /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */
+        unsigned v_esp;
+        __asm__ volatile (
+                "movl   %%esp, %0\n\t"
+                : "=a" (v_esp)
+        );
+#if CONFIG_USE_INIT
+        printk_debug("v_esp=%08x\r\n", v_esp);
+#else           
+        print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n");
+#endif    
+        }
+#endif
+
+#if 1
+
+
+cpu_reset_x:
+
+#if CONFIG_USE_INIT
+        printk_debug("cpu_reset = %08x\r\n",cpu_reset);
+#else
+        print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n");
+#endif
+
+	if(cpu_reset == 0) {
+	        print_debug("Clearing initial memory region: ");
+	}
+	print_debug("No cache as ram now - ");
+
+	/* store cpu_reset to ebx */
+        __asm__ volatile (
+                "movl %0, %%ebx\n\t"
+                ::"a" (cpu_reset)
+        );
+
+	if(cpu_reset==0) {
+#define CLEAR_FIRST_1M_RAM 1
+#include "cpu/amd/car/cache_as_ram_post.c"
+	}
+	else {
+#undef CLEAR_FIRST_1M_RAM 
+#include "cpu/amd/car/cache_as_ram_post.c"
+	}
+
+	__asm__ volatile (
+                /* set new esp */ /* before _RAMBASE */
+                "subl   %0, %%ebp\n\t"
+                "subl   %0, %%esp\n\t"
+                ::"a"( (DCACHE_RAM_BASE + DCACHE_RAM_SIZE)- _RAMBASE )
+	);
+
+	{
+		unsigned new_cpu_reset;
+
+		/* get back cpu_reset from ebx */
+		__asm__ volatile (
+			"movl %%ebx, %0\n\t"
+			:"=a" (new_cpu_reset)
+		);
+
+		print_debug("Use Ram as Stack now - "); /* but We can not go back any more, we lost old stack data in cache as ram*/
+		if(new_cpu_reset==0) {        
+		        print_debug("done\r\n");	
+		} else 
+		{	
+			print_debug("\r\n");
+		}
+
+#if CONFIG_USE_INIT
+                printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset);
+#else
+                print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n");
+#endif
+		/*copy and execute linuxbios_ram */
+		copy_and_run(new_cpu_reset);
+		/* We will not return */
+	}
+#endif
+
+
+	print_debug("should not be here -\r\n");
+
+}
diff --git a/src/mainboard/tyan/s4880/chip.h b/src/mainboard/tyan/s4880/chip.h
new file mode 100644
index 0000000000..65d6d96c1e
--- /dev/null
+++ b/src/mainboard/tyan/s4880/chip.h
@@ -0,0 +1,6 @@
+extern struct chip_operations mainboard_tyan_s4880_ops;
+
+struct mainboard_tyan_s4880_config {
+	int fixup_scsi;
+//	int fixup_vga;
+};
diff --git a/src/mainboard/tyan/s4880/cmos.layout b/src/mainboard/tyan/s4880/cmos.layout
new file mode 100644
index 0000000000..c1f3d75316
--- /dev/null
+++ b/src/mainboard/tyan/s4880/cmos.layout
@@ -0,0 +1,98 @@
+entries
+
+#start-bit length  config config-ID    name
+#0            8       r       0        seconds
+#8            8       r       0        alarm_seconds
+#16           8       r       0        minutes
+#24           8       r       0        alarm_minutes
+#32           8       r       0        hours
+#40           8       r       0        alarm_hours
+#48           8       r       0        day_of_week
+#56           8       r       0        day_of_month
+#64           8       r       0        month
+#72           8       r       0        year
+#80           4       r       0        rate_select
+#84           3       r       0        REF_Clock
+#87           1       r       0        UIP
+#88           1       r       0        auto_switch_DST
+#89           1       r       0        24_hour_mode
+#90           1       r       0        binary_values_enable
+#91           1       r       0        square-wave_out_enable
+#92           1       r       0        update_finished_enable
+#93           1       r       0        alarm_interrupt_enable
+#94           1       r       0        periodic_interrupt_enable
+#95           1       r       0        disable_clock_updates
+#96         288       r       0        temporary_filler
+0          384       r       0        reserved_memory
+384          1       e       4        boot_option
+385          1       e       4        last_boot
+386          1       e       1        ECC_memory
+388          4       r       0        reboot_bits
+392          3       e       5        baud_rate
+395          1       e       1        hw_scrubber
+396          1       e       1        interleave_chip_selects
+397          2       e       8        max_mem_clock
+399	     1	     e	     2	      dual_core
+400          1       e       1        power_on_after_fail
+412          4       e       6        debug_level
+416          4       e       7        boot_first
+420          4       e       7        boot_second
+424          4       e       7        boot_third
+428          4       h       0        boot_index
+432	     8       h       0        boot_countdown
+440          4       e       9        slow_cpu
+444          1       e       1        nmi
+445          1       e       1        iommu
+728        256       h       0        user_data
+984         16       h       0        check_sum
+# Reserve the extended AMD configuration registers
+1000        24       r       0        reserved_memory
+
+
+
+enumerations
+
+#ID value   text
+1     0     Disable
+1     1     Enable
+2     0     Enable
+2     1     Disable
+4     0     Fallback
+4     1     Normal
+5     0     115200
+5     1     57600
+5     2     38400
+5     3     19200
+5     4     9600
+5     5     4800
+5     6     2400
+5     7     1200
+6     6     Notice
+6     7     Info
+6     8     Debug
+6     9     Spew
+7     0     Network
+7     1     HDD
+7     2     Floppy
+7     8     Fallback_Network
+7     9     Fallback_HDD
+7     10    Fallback_Floppy
+#7     3     ROM
+8     0     200Mhz
+8     1     166Mhz
+8     2     133Mhz
+8     3     100Mhz
+9     0     off
+9     1     87.5%
+9     2     75.0%
+9     3     62.5%
+9     4     50.0%
+9     5     37.5%
+9     6     25.0%
+9     7     12.5%
+
+checksums
+
+checksum 392 983 984
+
+
diff --git a/src/mainboard/tyan/s4880/failover.c b/src/mainboard/tyan/s4880/failover.c
new file mode 100644
index 0000000000..39758aefa7
--- /dev/null
+++ b/src/mainboard/tyan/s4880/failover.c
@@ -0,0 +1,88 @@
+#define ASSEMBLY 1
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "pc80/mc146818rtc_early.c"
+#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
+#include "northbridge/amd/amdk8/early_ht.c"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+
+#if CONFIG_LOGICAL_CPUS==1
+#include "cpu/amd/dualcore/dualcore_id.c"
+#endif  
+        
+                
+static unsigned long main(unsigned long bist)
+{       
+#if CONFIG_LOGICAL_CPUS==1
+        struct node_core_id id;
+#else   
+        unsigned nodeid;
+#endif          
+        /* Make cerain my local apic is useable */
+        enable_lapic();
+        
+#if CONFIG_LOGICAL_CPUS==1
+        id = get_node_core_id_x();
+        /* Is this a cpu only reset? */
+        if (cpu_init_detected(id.nodeid)) {
+#else
+        nodeid = lapicid();
+        /* Is this a cpu only reset? */
+        if (cpu_init_detected(nodeid)) {
+#endif
+               if (last_boot_normal()) {
+                        goto normal_image;
+                } else {
+                        goto cpu_reset;
+                }
+        }
+        /* Is this a secondary cpu? */
+        if (!boot_cpu()) {
+		if (last_boot_normal()) {
+			goto normal_image;
+		} else {
+			goto fallback_image;
+		}
+	}
+	
+
+	/* Nothing special needs to be done to find bus 0 */
+	/* Allow the HT devices to be found */
+	enumerate_ht_chain();
+	
+	/* Setup the 8111 */
+	amd8111_enable_rom();
+
+	/* Is this a deliberate reset by the bios */
+	if (bios_reset_detected() && last_boot_normal()) {
+		goto normal_image;
+	}
+	/* This is the primary cpu how should I boot? */
+	else if (do_normal_boot()) {
+		goto normal_image;
+	}
+	else {
+		goto fallback_image;
+	}
+ normal_image:
+	asm volatile ("jmp __normal_image" 
+		: /* outputs */ 
+		: "a" (bist) /* inputs */
+		: /* clobbers */
+		);
+ cpu_reset:
+#if 0
+	asm volatile ("jmp __cpu_reset"
+		: /* outputs */ 
+		: "a"(bist) /* inputs */
+		: /* clobbers */
+		);
+#endif
+ fallback_image:
+	return bist;
+}
diff --git a/src/mainboard/tyan/s4880/irq_tables.c b/src/mainboard/tyan/s4880/irq_tables.c
new file mode 100644
index 0000000000..dd293ca966
--- /dev/null
+++ b/src/mainboard/tyan/s4880/irq_tables.c
@@ -0,0 +1,46 @@
+/* This file was generated by getpir.c, do not modify! 
+   (but if you do, please run checkpir on it to verify)
+   Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+
+   Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+*/
+
+#include <arch/pirq_routing.h>
+
+const struct irq_routing_table intel_irq_routing_table = {
+	PIRQ_SIGNATURE, /* u32 signature */
+	PIRQ_VERSION,   /* u16 version   */
+	32+16*22,        /* there can be total 22 devices on the bus */
+	1,           /* Where the interrupt router lies (bus) */
+	(4<<3)|3,           /* Where the interrupt router lies (dev) */
+	0,         /* IRQs devoted exclusively to PCI usage */
+	0x1022,         /* Vendor */
+	0x7400,         /* Device */
+	0,         /* Crap (miniport) */
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
+	0x9a,         /*  u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
+	{
+		{0,0xc0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+		{1,(3<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+		{0x4,0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0x4, 0xdef8}}, 0, 0},
+		{0x4,0x8, {{0x1, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+		{0x4,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0},
+		{0x4,0x18, {{0x2, 0xdef8}, {0x1, 0xdef8}, {0x3, 0xdef8}, {0, 0xdef8}}, 0, 0},
+		{0x4,0x28, {{0x4, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+		{0x4,0x30, {{0x3, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+		{1,(4<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+		{1,(1<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+		{0x2,0x18, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x2, 0},
+		{0x2,0x10, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x3, 0},
+		{0x2,0x48, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+		{0x2,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+		{1,(2<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+		{0x3,0x18, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x4, 0},
+		{0x3,0x8, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x5, 0},
+		{0x3,0x20, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x6, 0},
+		{0x3,0x28, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x7, 0},
+		{0,0xc8, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+		{0,0xd0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+		{0,0xd8, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
+	}
+};
diff --git a/src/mainboard/tyan/s4880/mainboard.c b/src/mainboard/tyan/s4880/mainboard.c
new file mode 100644
index 0000000000..b13dd9f702
--- /dev/null
+++ b/src/mainboard/tyan/s4880/mainboard.c
@@ -0,0 +1,12 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "chip.h"
+
+#if CONFIG_CHIP_NAME == 1
+struct chip_operations mainboard_tyan_s4880_ops = {
+	CHIP_NAME("Tyan s4880 mainboard")
+};
+#endif
diff --git a/src/mainboard/tyan/s4880/mptable.c b/src/mainboard/tyan/s4880/mptable.c
new file mode 100644
index 0000000000..a7ad8cc049
--- /dev/null
+++ b/src/mainboard/tyan/s4880/mptable.c
@@ -0,0 +1,259 @@
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#if CONFIG_LOGICAL_CPUS==1
+#include <cpu/amd/dualcore.h>
+#endif
+
+static unsigned node_link_to_bus(unsigned node, unsigned link)
+{
+        device_t dev;
+        unsigned reg;
+
+        dev = dev_find_slot(0, PCI_DEVFN(0x18, 1));
+        if (!dev) {
+                return 0;
+        }
+        for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
+                uint32_t config_map;
+                unsigned dst_node;
+                unsigned dst_link;
+                unsigned bus_base;
+                config_map = pci_read_config32(dev, reg);
+                if ((config_map & 3) != 3) {
+                        continue;
+                }
+                dst_node = (config_map >> 4) & 7;
+                dst_link = (config_map >> 8) & 3;
+                bus_base = (config_map >> 16) & 0xff;
+#if 0                           
+                printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n",
+                        dst_node, dst_link, bus_base,
+                        reg, config_map);
+#endif
+                if ((dst_node == node) && (dst_link == link))
+                {
+                        return bus_base;
+                }
+        }
+        return 0;
+}
+
+void *smp_write_config_table(void *v)
+{
+        static const char sig[4] = "PCMP";
+        static const char oem[8] = "TYAN    ";
+        static const char productid[12] = "S4880       ";
+        struct mp_config_table *mc;
+
+        unsigned char bus_num;
+        unsigned char bus_isa;
+	unsigned char bus_chain_0;
+        unsigned char bus_8131_1;
+        unsigned char bus_8131_2;
+        unsigned char bus_8111_1;
+        unsigned apicid_base;
+        unsigned apicid_8111;
+        unsigned apicid_8131_1;
+        unsigned apicid_8131_2;
+  
+        mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+        memset(mc, 0, sizeof(*mc));
+
+        memcpy(mc->mpc_signature, sig, sizeof(sig));
+        mc->mpc_length = sizeof(*mc); /* initially just the header */
+        mc->mpc_spec = 0x04;
+        mc->mpc_checksum = 0; /* not yet computed */
+        memcpy(mc->mpc_oem, oem, sizeof(oem));
+        memcpy(mc->mpc_productid, productid, sizeof(productid));
+        mc->mpc_oemptr = 0;
+        mc->mpc_oemsize = 0;
+        mc->mpc_entry_count = 0; /* No entries yet... */
+        mc->mpc_lapic = LAPIC_ADDR;
+        mc->mpe_length = 0;
+        mc->mpe_checksum = 0;
+        mc->reserved = 0;
+
+        smp_write_processors(mc);
+
+       
+        {
+                device_t dev;
+
+                /* HT chain 0 */
+                bus_chain_0 = node_link_to_bus(0, 2);
+                if (bus_chain_0 == 0) {
+                        printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n");
+                        bus_chain_0 = 1;
+                }
+                
+                /* 8111 */
+                dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0));
+                if (dev) {
+                        bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+                        bus_isa    = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+                        bus_isa++; 
+                }       
+                else {
+                        printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n");
+
+                        bus_8111_1 = 4;
+                        bus_isa = 5;
+                }
+                /* 8131-1 */
+                dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0));
+                if (dev) {
+                        bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+                }
+                else {
+                        printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n");
+
+                        bus_8131_1 = 2;
+                }
+                /* 8131-2 */
+                dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x02,0));
+                if (dev) {
+                        bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+                }
+                else {
+                        printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n");
+
+                        bus_8131_2 = 3;
+                }
+        }
+
+/*Bus:          Bus ID  Type*/
+        /* define bus and isa numbers */
+        for(bus_num = 0; bus_num < bus_isa; bus_num++) {
+                smp_write_bus(mc, bus_num, "PCI   ");
+        }
+        smp_write_bus(mc, bus_isa, "ISA   ");
+
+	
+/*I/O APICs:	APIC ID	Version	State		Address*/
+#if CONFIG_LOGICAL_CPUS==1
+	apicid_base = get_apicid_base(3);
+#else  
+        apicid_base = CONFIG_MAX_PHYSICAL_CPUS; 
+#endif
+        apicid_8111 = apicid_base+0; 
+        apicid_8131_1 = apicid_base+1;
+        apicid_8131_2 = apicid_base+2;
+
+	smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000);
+        {
+                device_t dev;
+                struct resource *res;
+                dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x1,1));
+                if (dev) {
+                        res = find_resource(dev, PCI_BASE_ADDRESS_0);
+                        if (res) {
+                                smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base);
+                        }
+                }
+                dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x2,1));
+                if (dev) {
+                        res = find_resource(dev, PCI_BASE_ADDRESS_0);
+                        if (res) {
+                                smp_write_ioapic(mc, apicid_8131_2, 0x11, res->base);
+                        }
+                }
+
+	}
+  
+/*I/O Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
+*/	smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x2);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, apicid_8111, 0x3);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, apicid_8111, 0x4);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x5, apicid_8111, 0x5);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, apicid_8111, 0x6);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, apicid_8111, 0x7);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, apicid_8111, 0x8);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x9, apicid_8111, 0x9);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xa, apicid_8111, 0xa);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xb, apicid_8111, 0xb);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, apicid_8111, 0xc);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_8111, 0xd);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf);
+	
+
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|0, apicid_8111, 0x13);
+
+
+//On Board AMD USB
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13);
+
+//On Board Via USB 1.1 and 2
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|0, apicid_8111, 0x11); //1.1
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|1, apicid_8111, 0x10); //1.1
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|2, apicid_8111, 0x12); //2
+
+//Slot 5 PCI 32
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|0, apicid_8111, 0x10);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|1, apicid_8111, 0x11);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|2, apicid_8111, 0x12); //
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|3, apicid_8111, 0x13); //
+
+
+//On Board SI Serial ATA
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (5<<2)|0, apicid_8111, 0x13);
+//On Board ATI Display Adapter
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (6<<2)|0, apicid_8111, 0x12);
+
+
+//Slot 4 PCIX 100/66
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|0, apicid_8131_1, 0x3);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|1, apicid_8131_1, 0x0);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, apicid_8131_1, 0x1);//
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, apicid_8131_1, 0x2);//
+
+//Slot 3 PCIX 100/66        
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, apicid_8131_1, 0x2);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, apicid_8131_1, 0x3);//
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, apicid_8131_1, 0x0);//
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|3, apicid_8131_1, 0x1);//
+
+//On Board LSI scsi and NIC
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|0, apicid_8131_1, 0x0);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|1, apicid_8131_1, 0x1);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, apicid_8131_1, 0x0);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|1, apicid_8131_1, 0x1);
+
+//Slot 2 PCI-X 133/100/66
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|0, apicid_8131_2, 0x0);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|1, apicid_8131_2, 0x1);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|2, apicid_8131_2, 0x2); //
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|3, apicid_8131_2, 0x3); //
+
+//Slot 1 PCI-X 133/100/66
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|0, apicid_8131_2, 0x1);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|1, apicid_8131_2, 0x2);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|2, apicid_8131_2, 0x3);//
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|3, apicid_8131_2, 0x0);//
+
+/*Local Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#*/
+	smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);
+	smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1);
+	/* There is no extension information... */
+
+	/* Compute the checksums */
+	mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+	mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+	printk_debug("Wrote the mp table end at: %p - %p\n",
+		mc, smp_next_mpe_entry(mc));
+	return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+	void *v;
+	v = smp_write_floating_table(addr);
+	return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/tyan/s4880/resourcemap.c b/src/mainboard/tyan/s4880/resourcemap.c
new file mode 100644
index 0000000000..d9315a026a
--- /dev/null
+++ b/src/mainboard/tyan/s4880/resourcemap.c
@@ -0,0 +1,264 @@
+/*
+ * Tyan S4880 needs a different resource map
+ *
+ */
+
+static void setup_s4880_resource_map(void)
+{
+	static const unsigned int register_values[] = {
+	/* Careful set limit registers before base registers which contain the enables */
+	/* DRAM Limit i Registers
+	 * F1:0x44 i = 0
+	 * F1:0x4C i = 1
+	 * F1:0x54 i = 2
+	 * F1:0x5C i = 3
+	 * F1:0x64 i = 4
+	 * F1:0x6C i = 5
+	 * F1:0x74 i = 6
+	 * F1:0x7C i = 7
+	 * [ 2: 0] Destination Node ID
+	 *	   000 = Node 0
+	 *	   001 = Node 1
+	 *	   010 = Node 2
+	 *	   011 = Node 3
+	 *	   100 = Node 4
+	 *	   101 = Node 5
+	 *	   110 = Node 6
+	 *	   111 = Node 7
+	 * [ 7: 3] Reserved
+	 * [10: 8] Interleave select
+	 *	   specifies the values of A[14:12] to use with interleave enable.
+	 * [15:11] Reserved
+	 * [31:16] DRAM Limit Address i Bits 39-24
+	 *	   This field defines the upper address bits of a 40 bit  address
+	 *	   that define the end of the DRAM region.
+	 */
+	PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+	PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+	PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+	PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+	PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+	PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+	PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+	/* DRAM Base i Registers
+	 * F1:0x40 i = 0
+	 * F1:0x48 i = 1
+	 * F1:0x50 i = 2
+	 * F1:0x58 i = 3
+	 * F1:0x60 i = 4
+	 * F1:0x68 i = 5
+	 * F1:0x70 i = 6
+	 * F1:0x78 i = 7
+	 * [ 0: 0] Read Enable
+	 *	   0 = Reads Disabled
+	 *	   1 = Reads Enabled
+	 * [ 1: 1] Write Enable
+	 *	   0 = Writes Disabled
+	 *	   1 = Writes Enabled
+	 * [ 7: 2] Reserved
+	 * [10: 8] Interleave Enable
+	 *	   000 = No interleave
+	 *	   001 = Interleave on A[12] (2 nodes)
+	 *	   010 = reserved
+	 *	   011 = Interleave on A[12] and A[14] (4 nodes)
+	 *	   100 = reserved
+	 *	   101 = reserved
+	 *	   110 = reserved
+	 *	   111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+	 * [15:11] Reserved
+	 * [13:16] DRAM Base Address i Bits 39-24
+	 *	   This field defines the upper address bits of a 40-bit address
+	 *	   that define the start of the DRAM region.
+	 */
+	PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+	/* Memory-Mapped I/O Limit i Registers
+	 * F1:0x84 i = 0
+	 * F1:0x8C i = 1
+	 * F1:0x94 i = 2
+	 * F1:0x9C i = 3
+	 * F1:0xA4 i = 4
+	 * F1:0xAC i = 5
+	 * F1:0xB4 i = 6
+	 * F1:0xBC i = 7
+	 * [ 2: 0] Destination Node ID
+	 *	   000 = Node 0
+	 *	   001 = Node 1
+	 *	   010 = Node 2
+	 *	   011 = Node 3
+	 *	   100 = Node 4
+	 *	   101 = Node 5
+	 *	   110 = Node 6
+	 *	   111 = Node 7
+	 * [ 3: 3] Reserved
+	 * [ 5: 4] Destination Link ID
+	 *	   00 = Link 0
+	 *	   01 = Link 1
+	 *	   10 = Link 2
+	 *	   11 = Reserved
+	 * [ 6: 6] Reserved
+	 * [ 7: 7] Non-Posted
+	 *	   0 = CPU writes may be posted
+	 *	   1 = CPU writes must be non-posted
+	 * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+	 *	   This field defines the upp adddress bits of a 40-bit address that
+	 *	   defines the end of a memory-mapped I/O region n
+	 */
+	PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20,
+
+	/* Memory-Mapped I/O Base i Registers
+	 * F1:0x80 i = 0
+	 * F1:0x88 i = 1
+	 * F1:0x90 i = 2
+	 * F1:0x98 i = 3
+	 * F1:0xA0 i = 4
+	 * F1:0xA8 i = 5
+	 * F1:0xB0 i = 6
+	 * F1:0xB8 i = 7
+	 * [ 0: 0] Read Enable
+	 *	   0 = Reads disabled
+	 *	   1 = Reads Enabled
+	 * [ 1: 1] Write Enable
+	 *	   0 = Writes disabled
+	 *	   1 = Writes Enabled
+	 * [ 2: 2] Cpu Disable
+	 *	   0 = Cpu can use this I/O range
+	 *	   1 = Cpu requests do not use this I/O range
+	 * [ 3: 3] Lock
+	 *	   0 = base/limit registers i are read/write
+	 *	   1 = base/limit registers i are read-only
+	 * [ 7: 4] Reserved
+	 * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+	 *	   This field defines the upper address bits of a 40bit address 
+	 *	   that defines the start of memory-mapped I/O region i
+	 */
+	PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
+
+	/* PCI I/O Limit i Registers
+	 * F1:0xC4 i = 0
+	 * F1:0xCC i = 1
+	 * F1:0xD4 i = 2
+	 * F1:0xDC i = 3
+	 * [ 2: 0] Destination Node ID
+	 *	   000 = Node 0
+	 *	   001 = Node 1
+	 *	   010 = Node 2
+	 *	   011 = Node 3
+	 *	   100 = Node 4
+	 *	   101 = Node 5
+	 *	   110 = Node 6
+	 *	   111 = Node 7
+	 * [ 3: 3] Reserved
+	 * [ 5: 4] Destination Link ID
+	 *	   00 = Link 0
+	 *	   01 = Link 1
+	 *	   10 = Link 2
+	 *	   11 = reserved
+	 * [11: 6] Reserved
+	 * [24:12] PCI I/O Limit Address i
+	 *	   This field defines the end of PCI I/O region n
+	 * [31:25] Reserved
+	 */
+	PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020,
+	PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+	/* PCI I/O Base i Registers
+	 * F1:0xC0 i = 0
+	 * F1:0xC8 i = 1
+	 * F1:0xD0 i = 2
+	 * F1:0xD8 i = 3
+	 * [ 0: 0] Read Enable
+	 *	   0 = Reads Disabled
+	 *	   1 = Reads Enabled
+	 * [ 1: 1] Write Enable
+	 *	   0 = Writes Disabled
+	 *	   1 = Writes Enabled
+	 * [ 3: 2] Reserved
+	 * [ 4: 4] VGA Enable
+	 *	   0 = VGA matches Disabled
+	 *	   1 = matches all address < 64K and where A[9:0] is in the 
+	 *	       range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+	 * [ 5: 5] ISA Enable
+	 *	   0 = ISA matches Disabled
+	 *	   1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+	 *	       from matching agains this base/limit pair
+	 * [11: 6] Reserved
+	 * [24:12] PCI I/O Base i
+	 *	   This field defines the start of PCI I/O region n 
+	 * [31:25] Reserved
+	 */
+	PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
+	PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+	/* Config Base and Limit i Registers
+	 * F1:0xE0 i = 0
+	 * F1:0xE4 i = 1
+	 * F1:0xE8 i = 2
+	 * F1:0xEC i = 3
+	 * [ 0: 0] Read Enable
+	 *	   0 = Reads Disabled
+	 *	   1 = Reads Enabled
+	 * [ 1: 1] Write Enable
+	 *	   0 = Writes Disabled
+	 *	   1 = Writes Enabled
+	 * [ 2: 2] Device Number Compare Enable
+	 *	   0 = The ranges are based on bus number
+	 *	   1 = The ranges are ranges of devices on bus 0
+	 * [ 3: 3] Reserved
+	 * [ 6: 4] Destination Node
+	 *	   000 = Node 0
+	 *	   001 = Node 1
+	 *	   010 = Node 2
+	 *	   011 = Node 3
+	 *	   100 = Node 4
+	 *	   101 = Node 5
+	 *	   110 = Node 6
+	 *	   111 = Node 7
+	 * [ 7: 7] Reserved
+	 * [ 9: 8] Destination Link
+	 *	   00 = Link 0
+	 *	   01 = Link 1
+	 *	   10 = Link 2
+	 *	   11 - Reserved
+	 * [15:10] Reserved
+	 * [23:16] Bus Number Base i
+	 *	   This field defines the lowest bus number in configuration region i
+	 * [31:24] Bus Number Limit i
+	 *	   This field defines the highest bus number in configuration regin i
+	 */
+//	PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000203,
+	PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+	PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+	};
+	int max;
+	max = sizeof(register_values)/sizeof(register_values[0]);
+	setup_resource_map(register_values, max);
+}
+