summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorDenis 'GNUtoo' Carikli <GNUtoo@no-log.org>2011-11-27 15:58:38 +0100
committerPatrick Georgi <patrick@georgi-clan.de>2011-12-02 17:27:51 +0100
commit96ffc55bfd3fa5500fbe6b315f81462d421fb1f1 (patch)
tree7e66e116f19d7f5e3723c1a0901525e91e6784ce /src
parent188a9b0a7fa0509a5d03a839073670054f0ed0f6 (diff)
downloadcoreboot-96ffc55bfd3fa5500fbe6b315f81462d421fb1f1.tar.xz
Add ASUS M4A785T-M mainboard support
This mainboard is very similar to the M4A785-M, but it has DDR3 instead of DDR2. That's why most of the code was copied or included from the m4a785-m directory Notable changes between the two mainboards include: * the selection of the last microcode (mc_patch_010000b6.h) which made it pass the CPU init. * the selection of DDR3 which made it pass the ram init This change was tested with the Trisquel 5.0 GNU/Linux distribution which uses the linux-libre version 2.6.38-12-generic The mainboard boots fine, however some special care is required for the onboard sound CODEC, and the onboard video chip: * the onboard sound CODEC(snd-hda-* has to be blacklisted), the issue is the same than the ASUS M4A785-M mainboard: It causes a flood of interupts which prevents booting * The internal video chip currently requires pci=nocrs, else the graphics are frozen as soon as the radeon module loads, and dmesg would print the following(the card only has 256M, and the mainboard was equiped with 2G of RAM): [ 3.674762] [drm] radeon: 3584M of VRAM memory ready [ 3.679863] [drm] radeon: 512M of GTT memory ready. instead of : [ 45.876088] [drm] radeon: 256M of VRAM memory ready [ 45.876089] [drm] radeon: 512M of GTT memory ready. * The screen(both VGA and HDMI) flickers at high resolution * Sometimes the computer freeze while changing the resolution (even the serial console stops responding) The following peripherals were tested: * The ath9k PCI wireless card was tested * The SATA hard disk works fine * the USB keyboard and mouse work fine * htop see 2 cores * serial port works under coreboot and GNU/Linux * power off and reboot works CPU frequency cannot be changed yet, this is addressed in a new commit. More detail are available here: http://www.coreboot.org/ASUS_M4A785T-M dmesg is available here: http://www.coreboot.org/pipermail/coreboot/2011-November/067604.html The mailing list thread on the graphic problem is here: http://www.coreboot.org/pipermail/coreboot/2011-November/067466.html Change-Id: I5df0bc1f9f0071b1e1ee7c8a356bf517aa8cf732 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/457 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/asus/Kconfig3
-rw-r--r--src/mainboard/asus/m4a785-m/mainboard.c4
-rw-r--r--src/mainboard/asus/m4a785t-m/Kconfig86
-rw-r--r--src/mainboard/asus/m4a785t-m/acpi/cpstate.asl75
-rw-r--r--src/mainboard/asus/m4a785t-m/acpi/ide.asl244
-rw-r--r--src/mainboard/asus/m4a785t-m/acpi/routing.asl300
-rw-r--r--src/mainboard/asus/m4a785t-m/acpi/sata.asl149
-rw-r--r--src/mainboard/asus/m4a785t-m/acpi/usb.asl161
-rw-r--r--src/mainboard/asus/m4a785t-m/acpi_tables.c21
-rw-r--r--src/mainboard/asus/m4a785t-m/chip.h23
-rw-r--r--src/mainboard/asus/m4a785t-m/cmos.layout98
-rw-r--r--src/mainboard/asus/m4a785t-m/devicetree.cb106
-rw-r--r--src/mainboard/asus/m4a785t-m/dsdt.asl1850
-rw-r--r--src/mainboard/asus/m4a785t-m/get_bus_conf.c21
-rw-r--r--src/mainboard/asus/m4a785t-m/irq_tables.c21
-rw-r--r--src/mainboard/asus/m4a785t-m/mainboard.c21
-rw-r--r--src/mainboard/asus/m4a785t-m/mptable.c21
-rw-r--r--src/mainboard/asus/m4a785t-m/romstage.c21
18 files changed, 3225 insertions, 0 deletions
diff --git a/src/mainboard/asus/Kconfig b/src/mainboard/asus/Kconfig
index 77b7997609..630e1ec97d 100644
--- a/src/mainboard/asus/Kconfig
+++ b/src/mainboard/asus/Kconfig
@@ -35,6 +35,8 @@ config BOARD_ASUS_M2V_MX_SE
bool "M2V-MX SE"
config BOARD_ASUS_M4A785M
bool "M4A785-M"
+config BOARD_ASUS_M4A785TM
+ bool "M4A785T-M"
config BOARD_ASUS_M4A78_EM
bool "M4A78-EM"
config BOARD_ASUS_M5A88_V
@@ -65,6 +67,7 @@ source "src/mainboard/asus/m2n-e/Kconfig"
source "src/mainboard/asus/m2v/Kconfig"
source "src/mainboard/asus/m2v-mx_se/Kconfig"
source "src/mainboard/asus/m4a785-m/Kconfig"
+source "src/mainboard/asus/m4a785t-m/Kconfig"
source "src/mainboard/asus/m4a78-em/Kconfig"
source "src/mainboard/asus/m5a88-v/Kconfig"
source "src/mainboard/asus/mew-am/Kconfig"
diff --git a/src/mainboard/asus/m4a785-m/mainboard.c b/src/mainboard/asus/m4a785-m/mainboard.c
index 8a96476bb4..d152f71d7d 100644
--- a/src/mainboard/asus/m4a785-m/mainboard.c
+++ b/src/mainboard/asus/m4a785-m/mainboard.c
@@ -242,6 +242,10 @@ static void m4a785m_enable(device_t dev)
}
struct chip_operations mainboard_ops = {
+#ifdef CONFIG_BOARD_ASUS_M4A785TM
+ CHIP_NAME("ASUS M4A785T-M Mainboard")
+#else
CHIP_NAME("ASUS M4A785-M Mainboard")
+#endif
.enable_dev = m4a785m_enable,
};
diff --git a/src/mainboard/asus/m4a785t-m/Kconfig b/src/mainboard/asus/m4a785t-m/Kconfig
new file mode 100644
index 0000000000..e3893b28fc
--- /dev/null
+++ b/src/mainboard/asus/m4a785t-m/Kconfig
@@ -0,0 +1,86 @@
+if BOARD_ASUS_M4A785TM
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select ARCH_X86
+ select CPU_AMD_SOCKET_AM3
+ select DIMM_DDR3
+ select DIMM_REGISTERED
+ select NORTHBRIDGE_AMD_AMDFAM10
+ select SOUTHBRIDGE_AMD_RS780
+ select SOUTHBRIDGE_AMD_SB700
+ select SOUTHBRIDGE_AMD_SB700_SKIP_ISA_DMA_INIT
+ select SUPERIO_ITE_IT8712F
+ select HAVE_BUS_CONFIG
+ select HAVE_OPTION_TABLE
+ select HAVE_PIRQ_TABLE
+ select HAVE_MP_TABLE
+ select HAVE_HARD_RESET
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
+ select LIFT_BSP_APIC_ID
+ select SERIAL_CPU_INIT
+ select AMDMCT
+ select HAVE_ACPI_TABLES
+ select BOARD_ROMSIZE_KB_1024
+ select RAMINIT_SYSINFO
+ select ENABLE_APIC_EXT_ID
+ select GFXUMA
+ select QRANK_DIMM_SUPPORT
+
+config MAINBOARD_DIR
+ string
+ default asus/m4a785t-m
+
+config APIC_ID_OFFSET
+ hex
+ default 0x0
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "M4A785T-M"
+
+config MAX_CPUS
+ int
+ default 8
+
+config MAX_PHYSICAL_CPUS
+ int
+ default 2
+
+config MEM_TRAIN_SEQ
+ int
+ default 2
+
+config SB_HT_CHAIN_ON_BUS0
+ int
+ default 1
+
+config HT_CHAIN_END_UNITID_BASE
+ hex
+ default 0x1
+
+config HT_CHAIN_UNITID_BASE
+ hex
+ default 0x0
+
+config IRQ_SLOT_COUNT
+ int
+ default 19
+
+config AMD_UCODE_PATCH_FILE
+ string
+ default "mc_patch_010000c4.h"
+
+config RAMTOP
+ hex
+ default 0x2000000
+
+config HEAP_SIZE
+ hex
+ default 0xc0000
+
+config RAMBASE
+ hex
+ default 0x200000
+
+endif
diff --git a/src/mainboard/asus/m4a785t-m/acpi/cpstate.asl b/src/mainboard/asus/m4a785t-m/acpi/cpstate.asl
new file mode 100644
index 0000000000..6a1b002474
--- /dev/null
+++ b/src/mainboard/asus/m4a785t-m/acpi/cpstate.asl
@@ -0,0 +1,75 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* This file defines the processor and performance state capability
+ * for each core in the system. It is included into the DSDT for each
+ * core. It assumes that each core of the system has the same performance
+ * characteristics.
+*/
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001)
+ {
+ Scope (\_PR) {
+ Processor(CPU0,0,0x808,0x06) {
+ #include "cpstate.asl"
+ }
+ Processor(CPU1,1,0x0,0x0) {
+ #include "cpstate.asl"
+ }
+ Processor(CPU2,2,0x0,0x0) {
+ #include "cpstate.asl"
+ }
+ Processor(CPU3,3,0x0,0x0) {
+ #include "cpstate.asl"
+ }
+ }
+*/
+ /* P-state support: The maximum number of P-states supported by the */
+ /* CPUs we'll use is 6. */
+ /* Get from AMI BIOS. */
+ Name(_PSS, Package(){
+ Package ()
+ {
+ 0x00000AF0,
+ 0x0000BF81,
+ 0x00000002,
+ 0x00000002,
+ 0x00000000,
+ 0x00000000
+ },
+
+ Package ()
+ {
+ 0x00000578,
+ 0x000076F2,
+ 0x00000002,
+ 0x00000002,
+ 0x00000001,
+ 0x00000001
+ }
+ })
+
+ Name(_PCT, Package(){
+ ResourceTemplate(){Register(FFixedHW, 0, 0, 0)},
+ ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}
+ })
+
+ Method(_PPC, 0){
+ Return(0)
+ }
diff --git a/src/mainboard/asus/m4a785t-m/acpi/ide.asl b/src/mainboard/asus/m4a785t-m/acpi/ide.asl
new file mode 100644
index 0000000000..6ea2b09f2c
--- /dev/null
+++ b/src/mainboard/asus/m4a785t-m/acpi/ide.asl
@@ -0,0 +1,244 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+Scope (_SB) {
+ Device(PCI0) {
+ Device(IDEC) {
+ Name(_ADR, 0x00140001)
+ #include "ide.asl"
+ }
+ }
+}
+*/
+
+/* Some timing tables */
+Name(UDTT, Package(){ /* Udma timing table */
+ 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */
+})
+
+Name(MDTT, Package(){ /* MWDma timing table */
+ 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */
+})
+
+Name(POTT, Package(){ /* Pio timing table */
+ 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */
+})
+
+/* Some timing register value tables */
+Name(MDRT, Package(){ /* MWDma timing register table */
+ 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */
+})
+
+Name(PORT, Package(){
+ 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */
+})
+
+OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
+ Field(ICRG, AnyAcc, NoLock, Preserve)
+{
+ PPTS, 8, /* Primary PIO Slave Timing */
+ PPTM, 8, /* Primary PIO Master Timing */
+ OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */
+ PMTM, 8, /* Primary MWDMA Master Timing */
+ OFFSET(0x08), PPCR, 8, /* Primary PIO Control */
+ OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */
+ PPSM, 4, /* Primary PIO slave Mode */
+ OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */
+ OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */
+ PDSM, 4, /* Primary UltraDMA Mode */
+}
+
+Method(GTTM, 1) /* get total time*/
+{
+ Store(And(Arg0, 0x0F), Local0) /* Recovery Width */
+ Increment(Local0)
+ Store(ShiftRight(Arg0, 4), Local1) /* Command Width */
+ Increment(Local1)
+ Return(Multiply(30, Add(Local0, Local1)))
+}
+
+Device(PRID)
+{
+ Name (_ADR, Zero)
+ Method(_GTM, 0)
+ {
+ NAME(OTBF, Buffer(20) { /* out buffer */
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+ })
+
+ CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */
+ CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */
+ CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */
+ CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
+ CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
+
+ /* Just return if the channel is disabled */
+ If(And(PPCR, 0x01)) { /* primary PIO control */
+ Return(OTBF)
+ }
+
+ /* Always tell them independent timing available and IOChannelReady used on both drives */
+ Or(BFFG, 0x1A, BFFG)
+
+ Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */
+ Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */
+
+ If(And(PDCR, 0x01)) { /* It's under UDMA mode */
+ Or(BFFG, 0x01, BFFG)
+ Store(DerefOf(Index(UDTT, PDMM)), DSD0)
+ }
+ Else {
+ Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */
+ }
+
+ If(And(PDCR, 0x02)) { /* It's under UDMA mode */
+ Or(BFFG, 0x04, BFFG)
+ Store(DerefOf(Index(UDTT, PDSM)), DSD1)
+ }
+ Else {
+ Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */
+ }
+
+ Return(OTBF) /* out buffer */
+ } /* End Method(_GTM) */
+
+ Method(_STM, 3, NotSerialized)
+ {
+ NAME(INBF, Buffer(20) { /* in buffer */
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+ })
+
+ CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */
+ CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */
+ CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */
+ CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
+ CreateDwordField(INBF, 16, BFFG) /*buffer flag */
+
+ Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
+ Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
+ Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
+ Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
+
+ Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
+ Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
+
+ If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */
+ Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
+ Divide(Local0, 7, PDMM,)
+ Or(PDCR, 0x01, PDCR)
+ }
+ Else {
+ If(LNotEqual(DSD0, 0xFFFFFFFF)) {
+ Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
+ Store(DerefOf(Index(MDRT, Local0)), PMTM)
+ }
+ }
+
+ If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */
+ Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
+ Divide(Local0, 7, PDSM,)
+ Or(PDCR, 0x02, PDCR)
+ }
+ Else {
+ If(LNotEqual(DSD1, 0xFFFFFFFF)) {
+ Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
+ Store(DerefOf(Index(MDRT, Local0)), PMTS)
+ }
+ }
+ /* Return(INBF) */
+ } /*End Method(_STM) */
+ Device(MST)
+ {
+ Name(_ADR, 0)
+ Method(_GTF) {
+ Name(CMBF, Buffer(21) {
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+ })
+ CreateByteField(CMBF, 1, POMD)
+ CreateByteField(CMBF, 8, DMMD)
+ CreateByteField(CMBF, 5, CMDA)
+ CreateByteField(CMBF, 12, CMDB)
+ CreateByteField(CMBF, 19, CMDC)
+
+ Store(0xA0, CMDA)
+ Store(0xA0, CMDB)
+ Store(0xA0, CMDC)
+
+ Or(PPMM, 0x08, POMD)
+
+ If(And(PDCR, 0x01)) {
+ Or(PDMM, 0x40, DMMD)
+ }
+ Else {
+ Store(Match
+ (MDTT, MLE, GTTM(PMTM),
+ MTR, 0, 0), Local0)
+ If(LLess(Local0, 3)) {
+ Or(0x20, Local0, DMMD)
+ }
+ }
+ Return(CMBF)
+ }
+ } /* End Device(MST) */
+
+ Device(SLAV)
+ {
+ Name(_ADR, 1)
+ Method(_GTF) {
+ Name(CMBF, Buffer(21) {
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+ })
+ CreateByteField(CMBF, 1, POMD)
+ CreateByteField(CMBF, 8, DMMD)
+ CreateByteField(CMBF, 5, CMDA)
+ CreateByteField(CMBF, 12, CMDB)
+ CreateByteField(CMBF, 19, CMDC)
+
+ Store(0xB0, CMDA)
+ Store(0xB0, CMDB)
+ Store(0xB0, CMDC)
+
+ Or(PPSM, 0x08, POMD)
+
+ If(And(PDCR, 0x02)) {
+ Or(PDSM, 0x40, DMMD)
+ }
+ Else {
+ Store(Match
+ (MDTT, MLE, GTTM(PMTS),
+ MTR, 0, 0), Local0)
+ If(LLess(Local0, 3)) {
+ Or(0x20, Local0, DMMD)
+ }
+ }
+ Return(CMBF)
+ }
+ } /* End Device(SLAV) */
+}
diff --git a/src/mainboard/asus/m4a785t-m/acpi/routing.asl b/src/mainboard/asus/m4a785t-m/acpi/routing.asl
new file mode 100644
index 0000000000..ad51815a56
--- /dev/null
+++ b/src/mainboard/asus/m4a785t-m/acpi/routing.asl
@@ -0,0 +1,300 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+ )
+ {
+ #include "routing.asl"
+ }
+*/
+
+/* Routing is in System Bus scope */
+Scope(\_SB) {
+ Name(PR0, Package(){
+ /* NB devices */
+ /* Bus 0, Dev 0 - RS780 Host Controller */
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
+ /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
+ Package(){0x0002FFFF, 0, INTC, 0 },
+ Package(){0x0002FFFF, 1, INTD, 0 },
+ Package(){0x0002FFFF, 2, INTA, 0 },
+ Package(){0x0002FFFF, 3, INTB, 0 },
+ /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+ /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+ Package(){0x0004FFFF, 0, INTA, 0 },
+ Package(){0x0004FFFF, 1, INTB, 0 },
+ Package(){0x0004FFFF, 2, INTC, 0 },
+ Package(){0x0004FFFF, 3, INTD, 0 },
+ /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+ /* Package(){0x0005FFFF, 0, INTB, 0 }, */
+ /* Package(){0x0005FFFF, 1, INTC, 0 }, */
+ /* Package(){0x0005FFFF, 2, INTD, 0 }, */
+ /* Package(){0x0005FFFF, 3, INTA, 0 }, */
+ /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */
+ Package(){0x0006FFFF, 0, INTC, 0 },
+ Package(){0x0006FFFF, 1, INTD, 0 },
+ Package(){0x0006FFFF, 2, INTA, 0 },
+ Package(){0x0006FFFF, 3, INTB, 0 },
+ /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */
+ Package(){0x0007FFFF, 0, INTD, 0 },
+ Package(){0x0007FFFF, 1, INTA, 0 },
+ Package(){0x0007FFFF, 2, INTB, 0 },
+ Package(){0x0007FFFF, 3, INTC, 0 },
+ /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
+
+ /* SB devices */
+ /* Bus 0, Dev 17 - SATA controller #2 */
+ /* Bus 0, Dev 18 - SATA controller #1 */
+ Package(){0x0011FFFF, 1, INTA, 0 },
+
+ /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */
+ Package(){0x0012FFFF, 0, INTA, 0 },
+ Package(){0x0012FFFF, 1, INTB, 0 },
+ Package(){0x0013FFFF, 0, INTA, 0 },
+ Package(){0x0013FFFF, 1, INTB, 0 },
+ Package(){0x0014FFFF, 2, INTA, 0 },
+
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */
+ Package(){0x0014FFFF, 0, INTA, 0 },
+ Package(){0x0014FFFF, 1, INTB, 0 },
+ Package(){0x0014FFFF, 2, INTC, 0 },
+ Package(){0x0014FFFF, 3, INTD, 0 },
+ })
+
+ Name(APR0, Package(){
+ /* NB devices in APIC mode */
+ /* Bus 0, Dev 0 - RS780 Host Controller */
+
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
+ /* Package(){0x0001FFFF, 0, 0, 18 }, */
+ /* package(){0x0001FFFF, 1, 0, 19 }, */
+
+ /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
+ Package(){0x0002FFFF, 0, 0, 18 },
+ /* Package(){0x0002FFFF, 1, 0, 19 }, */
+ /* Package(){0x0002FFFF, 2, 0, 16 }, */
+ /* Package(){0x0002FFFF, 3, 0, 17 }, */
+
+ /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+ Package(){0x0003FFFF, 0, 0, 19 },
+
+ /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+ Package(){0x0004FFFF, 0, 0, 16 },
+ /* Package(){0x0004FFFF, 1, 0, 17 }, */
+ /* Package(){0x0004FFFF, 2, 0, 18 }, */
+ /* Package(){0x0004FFFF, 3, 0, 19 }, */
+
+ /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+ /* Package(){0x0005FFFF, 0, 0, 17 }, */
+ /* Package(){0x0005FFFF, 1, 0, 18 }, */
+ /* Package(){0x0005FFFF, 2, 0, 19 }, */
+ /* Package(){0x0005FFFF, 3, 0, 16 }, */
+
+ /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */
+ /* Package(){0x0006FFFF, 0, 0, 18 }, */
+ /* Package(){0x0006FFFF, 1, 0, 19 }, */
+ /* Package(){0x0006FFFF, 2, 0, 16 }, */
+ /* Package(){0x0006FFFF, 3, 0, 17 }, */
+
+ /* Bus 0, Dev 7 - PCIe Bridge for network card */
+ /* Package(){0x0007FFFF, 0, 0, 19 }, */
+ /* Package(){0x0007FFFF, 1, 0, 16 }, */
+ /* Package(){0x0007FFFF, 2, 0, 17 }, */
+ /* Package(){0x0007FFFF, 3, 0, 18 }, */
+
+ /* Bus 0, Dev 9 - PCIe Bridge for network card */
+ Package(){0x0009FFFF, 0, 0, 17 },
+ /* Package(){0x0009FFFF, 1, 0, 16 }, */
+ /* Package(){0x0009FFFF, 2, 0, 17 }, */
+ /* Package(){0x0009FFFF, 3, 0, 18 }, */
+ /* Bus 0, Dev A - PCIe Bridge for network card */
+ Package(){0x000AFFFF, 0, 0, 18 },
+ /* Package(){0x000AFFFF, 1, 0, 16 }, */
+ /* Package(){0x000AFFFF, 2, 0, 17 }, */
+ /* Package(){0x000AFFFF, 3, 0, 18 }, */
+ /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
+
+ /* SB devices in APIC mode */
+ /* Bus 0, Dev 17 - SATA controller #2 */
+ /* Bus 0, Dev 18 - SATA controller #1 */
+ Package(){0x0011FFFF, 0, 0, 22 },
+
+ /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */
+ Package(){0x0012FFFF, 0, 0, 16 },
+ Package(){0x0012FFFF, 1, 0, 17 },
+ Package(){0x0013FFFF, 0, 0, 18 },
+ Package(){0x0013FFFF, 1, 0, 19 },
+ Package(){0x0014FFFF, 0, 0, 16 },
+ /* Package(){0x00130004, 2, 0, 18 }, */
+ /* Package(){0x00130005, 3, 0, 19 }, */
+
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */
+ Package(){0x0014FFFF, 0, 0, 16 },
+ Package(){0x0014FFFF, 1, 0, 17 },
+ Package(){0x0014FFFF, 2, 0, 18 },
+ Package(){0x0014FFFF, 3, 0, 19 },
+ /* Package(){0x00140004, 2, 0, 18 }, */
+ /* Package(){0x00140004, 3, 0, 19 }, */
+ /* Package(){0x00140005, 1, 0, 17 }, */
+ /* Package(){0x00140006, 1, 0, 17 }, */
+ })
+
+ Name(PR1, Package(){
+ /* Internal graphics - RS780 VGA, Bus1, Dev5 */
+ Package(){0x0005FFFF, 0, INTA, 0 },
+ Package(){0x0005FFFF, 1, INTB, 0 },
+ Package(){0x0005FFFF, 2, INTC, 0 },
+ Package(){0x0005FFFF, 3, INTD, 0 },
+ })
+
+ Name(APR1, Package(){
+ /* Internal graphics - RS780 VGA, Bus1, Dev5 */
+ Package(){0x0005FFFF, 0, 0, 18 },
+ Package(){0x0005FFFF, 1, 0, 19 },
+ /* Package(){0x0005FFFF, 2, 0, 20 }, */
+ /* Package(){0x0005FFFF, 3, 0, 17 }, */
+ })
+
+ Name(PS2, Package(){
+ /* The external GFX - Hooked to PCIe slot 2 */
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+ })
+
+ Name(APS2, Package(){
+ /* The external GFX - Hooked to PCIe slot 2 */
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ Name(PS4, Package(){
+ /* PCIe slot - Hooked to PCIe slot 4 */
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+ })
+
+ Name(APS4, Package(){
+ /* PCIe slot - Hooked to PCIe slot 4 */
+ Package(){0x0000FFFF, 0, 0, 16 },
+ Package(){0x0000FFFF, 1, 0, 17 },
+ Package(){0x0000FFFF, 2, 0, 18 },
+ Package(){0x0000FFFF, 3, 0, 19 },
+ })
+
+ Name(PS5, Package(){
+ /* PCIe slot - Hooked to PCIe slot 5 */
+ Package(){0x0000FFFF, 0, INTB, 0 },
+ Package(){0x0000FFFF, 1, INTC, 0 },
+ Package(){0x0000FFFF, 2, INTD, 0 },
+ Package(){0x0000FFFF, 3, INTA, 0 },
+ })
+
+ Name(APS5, Package(){
+ /* PCIe slot - Hooked to PCIe slot 5 */
+ Package(){0x0000FFFF, 0, 0, 17 },
+ Package(){0x0000FFFF, 1, 0, 18 },
+ Package(){0x0000FFFF, 2, 0, 19 },
+ Package(){0x0000FFFF, 3, 0, 16 },
+ })
+
+ Name(PS6, Package(){
+ /* PCIe slot - Hooked to PCIe slot 6 */
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+ })
+
+ Name(APS6, Package(){
+ /* PCIe slot - Hooked to PCIe slot 6 */
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ Name(PS7, Package(){
+ /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
+ Package(){0x0000FFFF, 0, INTD, 0 },
+ Package(){0x0000FFFF, 1, INTA, 0 },
+ Package(){0x0000FFFF, 2, INTB, 0 },
+ Package(){0x0000FFFF, 3, INTC, 0 },
+ })
+
+ Name(APS7, Package(){
+ /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
+ Package(){0x0000FFFF, 0, 0, 19 },
+ Package(){0x0000FFFF, 1, 0, 16 },
+ Package(){0x0000FFFF, 2, 0, 17 },
+ Package(){0x0000FFFF, 3, 0, 18 },
+ })
+ Name(PS9, Package(){
+ /* PCIe slot - Hooked to PCIe slot 9 */
+ Package(){0x0000FFFF, 0, INTD, 0 },
+ Package(){0x0000FFFF, 1, INTA, 0 },
+ Package(){0x0000FFFF, 2, INTB, 0 },
+ Package(){0x0000FFFF, 3, INTC, 0 },
+ })
+
+ Name(APS9, Package(){
+ /* PCIe slot - Hooked to PCIe slot 9 */
+ Package(){0x0000FFFF, 0, 0, 17 },
+ Package(){0x0000FFFF, 1, 0, 18 },
+ Package(){0x0000FFFF, 2, 0, 19 },
+ Package(){0x0000FFFF, 3, 0, 16 },
+ })
+ Name(PSa, Package(){
+ /* PCIe slot - Hooked to PCIe slot 10 */
+ Package(){0x0000FFFF, 0, INTD, 0 },
+ Package(){0x0000FFFF, 1, INTA, 0 },
+ Package(){0x0000FFFF, 2, INTB, 0 },
+ Package(){0x0000FFFF, 3, INTC, 0 },
+ })
+
+ Name(APSa, Package(){
+ /* PCIe slot - Hooked to PCIe slot 10 */
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ Name(PCIB, Package(){
+ /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */
+ Package(){0x0005FFFF, 0, 0, 0x14 },
+ Package(){0x0005FFFF, 1, 0, 0x15 },
+ Package(){0x0005FFFF, 2, 0, 0x16 },
+ Package(){0x0005FFFF, 3, 0, 0x17 },
+ Package(){0x0006FFFF, 0, 0, 0x15 },
+ Package(){0x0006FFFF, 1, 0, 0x16 },
+ Package(){0x0006FFFF, 2, 0, 0x17 },
+ Package(){0x0006FFFF, 3, 0, 0x14 },
+ Package(){0x0007FFFF, 0, 0, 0x16 },
+ Package(){0x0007FFFF, 1, 0, 0x17 },
+ Package(){0x0007FFFF, 2, 0, 0x14 },
+ Package(){0x0007FFFF, 3, 0, 0x15 },
+ })
+}
diff --git a/src/mainboard/asus/m4a785t-m/acpi/sata.asl b/src/mainboard/asus/m4a785t-m/acpi/sata.asl
new file mode 100644
index 0000000000..b5e6fc5665
--- /dev/null
+++ b/src/mainboard/asus/m4a785t-m/acpi/sata.asl
@@ -0,0 +1,149 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* simple name description */
+
+/*
+Scope (_SB) {
+ Device(PCI0) {
+ Device(SATA) {
+ Name(_ADR, 0x00110000)
+ #include "sata.asl"
+ }
+ }
+}
+*/
+
+Name(STTM, Buffer(20) {
+ 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+ 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+ 0x1f, 0x00, 0x00, 0x00
+})
+
+/* Start by clearing the PhyRdyChg bits */
+Method(_INI) {
+ \_GPE._L1F()
+}
+
+Device(PMRY)
+{
+ Name(_ADR, 0)
+ Method(_GTM, 0x0, NotSerialized) {
+ Return(STTM)
+ }
+ Method(_STM, 0x3, NotSerialized) {}
+
+ Device(PMST) {
+ Name(_ADR, 0)
+ Method(_STA,0) {
+ if (LGreater(P0IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ }/* end of PMST */
+
+ Device(PSLA)
+ {
+ Name(_ADR, 1)
+ Method(_STA,0) {
+ if (LGreater(P1IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of PSLA */
+} /* end of PMRY */
+
+
+Device(SEDY)
+{
+ Name(_ADR, 1) /* IDE Scondary Channel */
+ Method(_GTM, 0x0, NotSerialized) {
+ Return(STTM)
+ }
+ Method(_STM, 0x3, NotSerialized) {}
+
+ Device(SMST)
+ {
+ Name(_ADR, 0)
+ Method(_STA,0) {
+ if (LGreater(P2IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of SMST */
+
+ Device(SSLA)
+ {
+ Name(_ADR, 1)
+ Method(_STA,0) {
+ if (LGreater(P3IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of SSLA */
+} /* end of SEDY */
+
+/* SATA Hot Plug Support */
+Scope(\_GPE) {
+ Method(_L1F,0x0,NotSerialized) {
+ if (\_SB.P0PR) {
+ if (LGreater(\_SB.P0IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P0PR)
+ }
+
+ if (\_SB.P1PR) {
+ if (LGreater(\_SB.P1IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P1PR)
+ }
+
+ if (\_SB.P2PR) {
+ if (LGreater(\_SB.P2IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P2PR)
+ }
+
+ if (\_SB.P3PR) {
+ if (LGreater(\_SB.P3IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P3PR)
+ }
+ }
+}
diff --git a/src/mainboard/asus/m4a785t-m/acpi/usb.asl b/src/mainboard/asus/m4a785t-m/acpi/usb.asl
new file mode 100644
index 0000000000..203e0ad25a
--- /dev/null
+++ b/src/mainboard/asus/m4a785t-m/acpi/usb.asl
@@ -0,0 +1,161 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* simple name description */
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+ )
+ {
+ #include "usb.asl"
+ }
+*/
+Method(UCOC, 0) {
+ Sleep(20)
+ Store(0x13,CMTI)
+ Store(0,GPSL)
+}
+
+/* USB Port 0 overcurrent uses Gpm 0 */
+If(LLessEqual(UOM0,9)) {
+ Scope (\_GPE) {
+ Method (_L13) {
+ UCOC()
+ if(LEqual(GPB0,PLC0)) {
+ Not(PLC0,PLC0)
+ Store(PLC0, \_SB.PT0D)
+ }
+ }
+ }
+}
+
+/* USB Port 1 overcurrent uses Gpm 1 */
+If (LLessEqual(UOM1,9)) {
+ Scope (\_GPE) {
+ Method (_L14) {
+ UCOC()
+ if (LEqual(GPB1,PLC1)) {
+ Not(PLC1,PLC1)
+ Store(PLC1, \_SB.PT1D)
+ }
+ }
+ }
+}
+
+/* USB Port 2 overcurrent uses Gpm 2 */
+If (LLessEqual(UOM2,9)) {
+ Scope (\_GPE) {
+ Method (_L15) {
+ UCOC()
+ if (LEqual(GPB2,PLC2)) {
+ Not(PLC2,PLC2)
+ Store(PLC2, \_SB.PT2D)
+ }
+ }
+ }
+}
+
+/* USB Port 3 overcurrent uses Gpm 3 */
+If (LLessEqual(UOM3,9)) {
+ Scope (\_GPE) {
+ Method (_L16) {
+ UCOC()
+ if (LEqual(GPB3,PLC3)) {
+ Not(PLC3,PLC3)
+ Store(PLC3, \_SB.PT3D)
+ }
+ }
+ }
+}
+
+/* USB Port 4 overcurrent uses Gpm 4 */
+If (LLessEqual(UOM4,9)) {
+ Scope (\_GPE) {
+ Method (_L19) {
+ UCOC()
+ if (LEqual(GPB4,PLC4)) {
+ Not(PLC4,PLC4)
+ Store(PLC4, \_SB.PT4D)
+ }
+ }
+ }
+}
+
+/* USB Port 5 overcurrent uses Gpm 5 */
+If (LLessEqual(UOM5,9)) {
+ Scope (\_GPE) {
+ Method (_L1A) {
+ UCOC()
+ if (LEqual(GPB5,PLC5)) {
+ Not(PLC5,PLC5)
+ Store(PLC5, \_SB.PT5D)
+ }
+ }
+ }
+}
+
+/* USB Port 6 overcurrent uses Gpm 6 */
+If (LLessEqual(UOM6,9)) {
+ Scope (\_GPE) {
+ /* Method (_L1C) { */
+ Method (_L06) {
+ UCOC()
+ if (LEqual(GPB6,PLC6)) {
+ Not(PLC6,PLC6)
+ Store(PLC6, \_SB.PT6D)
+ }
+ }
+ }
+}
+
+/* USB Port 7 overcurrent uses Gpm 7 */
+If (LLessEqual(UOM7,9)) {
+ Scope (\_GPE) {
+ /* Method (_L1D) { */
+ Method (_L07) {
+ UCOC()
+ if (LEqual(GPB7,PLC7)) {
+ Not(PLC7,PLC7)
+ Store(PLC7, \_SB.PT7D)
+ }
+ }
+ }
+}
+
+/* USB Port 8 overcurrent uses Gpm 8 */
+If (LLessEqual(UOM8,9)) {
+ Scope (\_GPE) {
+ Method (_L17) {
+ if (LEqual(G8IS,PLC8)) {
+ Not(PLC8,PLC8)
+ Store(PLC8, \_SB.PT8D)
+ }
+ }
+ }
+}
+
+/* USB Port 9 overcurrent uses Gpm 9 */
+If (LLessEqual(UOM9,9)) {
+ Scope (\_GPE) {
+ Method (_L0E) {
+ if (LEqual(G9IS,0)) {
+ Store(1,\_SB.PT9D)
+ }
+ }
+ }
+}
diff --git a/src/mainboard/asus/m4a785t-m/acpi_tables.c b/src/mainboard/asus/m4a785t-m/acpi_tables.c
new file mode 100644
index 0000000000..a7ffc02f15
--- /dev/null
+++ b/src/mainboard/asus/m4a785t-m/acpi_tables.c
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "../m4a785-m/acpi_tables.c"
diff --git a/src/mainboard/asus/m4a785t-m/chip.h b/src/mainboard/asus/m4a785t-m/chip.h
new file mode 100644
index 0000000000..a98b97e98c
--- /dev/null
+++ b/src/mainboard/asus/m4a785t-m/chip.h
@@ -0,0 +1,23 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+extern struct chip_operations mainboard_ops;
+
+struct mainboard_config {};
diff --git a/src/mainboard/asus/m4a785t-m/cmos.layout b/src/mainboard/asus/m4a785t-m/cmos.layout
new file mode 100644
index 0000000000..53fdef5b0a
--- /dev/null
+++ b/src/mainboard/asus/m4a785t-m/cmos.layout
@@ -0,0 +1,98 @@
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+399 1 e 2 multi_core
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 amd_reserved
+
+
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+8 0 400Mhz
+8 1 333Mhz
+8 2 266Mhz
+8 3 200Mhz
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
+
+
diff --git a/src/mainboard/asus/m4a785t-m/devicetree.cb b/src/mainboard/asus/m4a785t-m/devicetree.cb
new file mode 100644
index 0000000000..e8764b1eba
--- /dev/null
+++ b/src/mainboard/asus/m4a785t-m/devicetree.cb
@@ -0,0 +1,106 @@
+chip northbridge/amd/amdfam10/root_complex
+ device lapic_cluster 0 on
+ chip cpu/amd/socket_AM3 #L1 and DDR2
+ device lapic 0 on end
+ end
+ end
+ device pci_domain 0 on
+ subsystemid 0x1043 0x83a2 inherit
+ chip northbridge/amd/amdfam10
+ device pci 18.0 on # northbridge
+ chip southbridge/amd/rs780
+ device pci 0.0 on end # HT 0x9600
+ device pci 1.0 on end # Internal Graphics P2P bridge 0x9602
+ device pci 2.0 off end # PCIE P2P bridge (external graphics) 0x9603
+ device pci 3.0 off end # PCIE P2P bridge 0x960b
+ device pci 4.0 off end # PCIE P2P bridge 0x9604
+ device pci 5.0 off end # PCIE P2P bridge 0x9605
+ device pci 6.0 off end # PCIE P2P bridge 0x9606
+ device pci 7.0 off end # PCIE P2P bridge 0x9607
+ device pci 8.0 off end # NB/SB Link P2P bridge
+ device pci 9.0 off end #
+ device pci a.0 on end # bridge to RTL8111/8168B PCI Express Gigabit Ethernet
+ register "gppsb_configuration" = "1" # Configuration B
+ register "gpp_configuration" = "3" # Configuration D default
+ register "port_enable" = "0x6fc"
+ register "gfx_dev2_dev3" = "1"
+ register "gfx_dual_slot" = "2"
+
+ register "gfx_lane_reversal" = "0"
+ register "gfx_tmds" = "0"
+ register "gfx_compliance" = "0"
+ register "gfx_reconfiguration" = "1"
+ register "gfx_link_width" = "0"
+ end
+ chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus
+ device pci 11.0 on end # SATA
+ device pci 12.0 on end # USB
+ device pci 12.1 on end # USB
+ device pci 12.2 on end # USB
+ device pci 13.0 on end # USB
+ device pci 13.1 on end # USB
+ device pci 13.2 on end # USB
+ device pci 14.0 on # SM
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-1
+ device i2c 53 on end
+ end
+ end # SM
+ device pci 14.1 on end # IDE 0x439c
+ device pci 14.2 on end # HDA 0x4383
+ device pci 14.3 on # LPC 0x439d
+ chip superio/ite/it8712f
+ device pnp 2e.0 off end # Floppy
+ device pnp 2e.1 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.2 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.3 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.4 off end # Environment Controller
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end
+ device pnp 2e.6 on # Mouse
+ irq 0x70 = 12
+ end
+ device pnp 2e.7 off # GPIO, must be closed for unresolved reason.
+ end
+ device pnp 2e.8 off # MIDI
+ end
+ device pnp 2e.9 off # GAME
+ end
+ device pnp 2e.a off end # CIR
+ end #superio
+ end #LPC
+ device pci 14.4 on end # PCI to PCI Bridge [1002:4384]
+ device pci 14.5 on end # USB 2
+ register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
+ end #southbridge/amd/sb700
+ end # device pci 18.0
+
+ device pci 18.0 on end
+ device pci 18.0 on end
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ device pci 18.4 on end
+ end # chip northbridge
+ end #pci_domain
+end # northbridge/amd/amdfam10/root_complex
diff --git a/src/mainboard/asus/m4a785t-m/dsdt.asl b/src/mainboard/asus/m4a785t-m/dsdt.asl
new file mode 100644
index 0000000000..34ddd3a205
--- /dev/null
+++ b/src/mainboard/asus/m4a785t-m/dsdt.asl
@@ -0,0 +1,1850 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+ "DSDT.AML", /* Output filename */
+ "DSDT", /* Signature */
+ 0x02, /* DSDT Revision, needs to be 2 for 64bit */
+ "ASUS ", /* OEMID */
+ "M4A785-M ", /* TABLE ID */
+ 0x00010001 /* OEM Revision */
+ )
+{ /* Start of ASL file */
+ /* #include "../../../arch/x86/acpi/debug.asl" */ /* Include global debug methods if needed */
+
+ /* Data to be patched by the BIOS during POST */
+ /* FIXME the patching is not done yet! */
+ /* Memory related values */
+ Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */
+ Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+ Name(PBLN, 0x0) /* Length of BIOS area */
+
+ Name(PCBA, 0xE0000000) /* Base address of PCIe config space */
+ Name(HPBA, 0xFED00000) /* Base address of HPET table */
+
+ Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+ /* USB overcurrent mapping pins. */
+ Name(UOM0, 0)
+ Name(UOM1, 2)
+ Name(UOM2, 0)
+ Name(UOM3, 7)
+ Name(UOM4, 2)
+ Name(UOM5, 2)
+ Name(UOM6, 6)
+ Name(UOM7, 2)
+ Name(UOM8, 6)
+ Name(UOM9, 6)
+
+ /* Some global data */
+ Name(OSTP, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+ Name(OSV, Ones) /* Assume nothing */
+ Name(PMOD, One) /* Assume APIC */
+
+ /*
+ * Processor Object
+ *
+ */
+ Scope (\_PR) { /* define processor scope */
+ Processor(
+ CPU0, /* name space name */
+ 0, /* Unique number for this processor */
+ 0x808, /* PBLK system I/O address !hardcoded! */
+ 0x06 /* PBLKLEN for boot processor */
+ ) {
+ #include "acpi/cpstate.asl"
+ }
+
+ Processor(
+ CPU1, /* name space name */
+ 1, /* Unique number for this processor */
+ 0x0000, /* PBLK system I/O address !hardcoded! */
+ 0x00 /* PBLKLEN for boot processor */
+ ) {
+ #include "acpi/cpstate.asl"
+ }
+
+ Processor(
+ CPU2, /* name space name */
+ 2, /* Unique number for this processor */
+ 0x0000, /* PBLK system I/O address !hardcoded! */
+ 0x00 /* PBLKLEN for boot processor */
+ ) {
+ #include "acpi/cpstate.asl"
+ }
+
+ Processor(
+ CPU3, /* name space name */
+ 3, /* Unique number for this processor */
+ 0x0000, /* PBLK system I/O address !hardcoded! */
+ 0x00 /* PBLKLEN for boot processor */
+ ) {
+ #include "acpi/cpstate.asl"
+ }
+ } /* End _PR scope */
+
+ /* PIC IRQ mapping registers, C00h-C01h */
+ OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
+ Field(PRQM, ByteAcc, NoLock, Preserve) {
+ PRQI, 0x00000008,
+ PRQD, 0x00000008, /* Offset: 1h */
+ }
+ IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) {
+ PINA, 0x00000008, /* Index 0 */
+ PINB, 0x00000008, /* Index 1 */
+ PINC, 0x00000008, /* Index 2 */
+ PIND, 0x00000008, /* Index 3 */
+ AINT, 0x00000008, /* Index 4 */
+ SINT, 0x00000008, /* Index 5 */
+ , 0x00000008, /* Index 6 */
+ AAUD, 0x00000008, /* Index 7 */
+ AMOD, 0x00000008, /* Index 8 */
+ PINE, 0x00000008, /* Index 9 */
+ PINF, 0x00000008, /* Index A */
+ PING, 0x00000008, /* Index B */
+ PINH, 0x00000008, /* Index C */
+ }
+
+ /* PCI Error control register */
+ OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001)
+ Field(PERC, ByteAcc, NoLock, Preserve) {
+ SENS, 0x00000001,
+ PENS, 0x00000001,
+ SENE, 0x00000001,
+ PENE, 0x00000001,
+ }
+
+ /* Client Management index/data registers */
+ OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002)
+ Field(CMT, ByteAcc, NoLock, Preserve) {
+ CMTI, 8,
+ /* Client Management Data register */
+ G64E, 1,
+ G64O, 1,
+ G32O, 2,
+ , 2,
+ GPSL, 2,
+ }
+
+ /* GPM Port register */
+ OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001)
+ Field(GPT, ByteAcc, NoLock, Preserve) {
+ GPB0,1,
+ GPB1,1,
+ GPB2,1,
+ GPB3,1,
+ GPB4,1,
+ GPB5,1,
+ GPB6,1,
+ GPB7,1,
+ }
+
+ /* Flash ROM program enable register */
+ OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001)
+ Field(FRE, ByteAcc, NoLock, Preserve) {
+ , 0x00000006,
+ FLRE, 0x00000001,
+ }
+
+ /* PM2 index/data registers */
+ OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002)
+ Field(PM2R, ByteAcc, NoLock, Preserve) {
+ PM2I, 0x00000008,
+ PM2D, 0x00000008,
+ }
+
+ /* Power Management I/O registers */
+ OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
+ Field(PIOR, ByteAcc, NoLock, Preserve) {
+ PIOI, 0x00000008,
+ PIOD, 0x00000008,
+ }
+ IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
+ Offset(0x00), /* MiscControl */
+ , 1,
+ T1EE, 1,
+ T2EE, 1,
+ Offset(0x01), /* MiscStatus */
+ , 1,
+ T1E, 1,
+ T2E, 1,
+ Offset(0x04), /* SmiWakeUpEventEnable3 */
+ , 7,
+ SSEN, 1,
+ Offset(0x07), /* SmiWakeUpEventStatus3 */
+ , 7,
+ CSSM, 1,
+ Offset(0x10), /* AcpiEnable */
+ , 6,
+ PWDE, 1,
+ Offset(0x1C), /* ProgramIoEnable */
+ , 3,
+ MKME, 1,
+ IO3E, 1,
+ IO2E, 1,
+ IO1E, 1,
+ IO0E, 1,
+ Offset(0x1D), /* IOMonitorStatus */
+ , 3,
+ MKMS, 1,
+ IO3S, 1,
+ IO2S, 1,
+ IO1S, 1,
+ IO0S,1,
+ Offset(0x20), /* AcpiPmEvtBlk */
+ APEB, 16,
+ Offset(0x36), /* GEvtLevelConfig */
+ , 6,
+ ELC6, 1,
+ ELC7, 1,
+ Offset(0x37), /* GPMLevelConfig0 */
+ , 3,
+ PLC0, 1,
+ PLC1, 1,
+ PLC2, 1,
+ PLC3, 1,
+ PLC8, 1,
+ Offset(0x38), /* GPMLevelConfig1 */
+ , 1,
+ PLC4, 1,
+ PLC5, 1,
+ , 1,
+ PLC6, 1,
+ PLC7, 1,
+ Offset(0x3B), /* PMEStatus1 */
+ GP0S, 1,
+ GM4S, 1,
+ GM5S, 1,
+ APS, 1,
+ GM6S, 1,
+ GM7S, 1,
+ GP2S, 1,
+ STSS, 1,
+ Offset(0x55), /* SoftPciRst */
+ SPRE, 1,
+ , 1,
+ , 1,
+ PNAT, 1,
+ PWMK, 1,
+ PWNS, 1,
+
+ /* Offset(0x61), */ /* Options_1 */
+ /* ,7, */
+ /* R617,1, */
+
+ Offset(0x65), /* UsbPMControl */
+ , 4,
+ URRE, 1,
+ Offset(0x68), /* MiscEnable68 */
+ , 3,
+ TMTE, 1,
+ , 1,
+ Offset(0x92), /* GEVENTIN */
+ , 7,
+ E7IS, 1,
+ Offset(0x96), /* GPM98IN */
+ G8IS, 1,
+ G9IS, 1,
+ Offset(0x9A), /* EnhanceControl */
+ ,7,
+ HPDE, 1,
+ Offset(0xA8), /* PIO7654Enable */
+ IO4E, 1,
+ IO5E, 1,
+ IO6E, 1,
+ IO7E, 1,
+ Offset(0xA9), /* PIO7654Status */
+ IO4S, 1,
+ IO5S, 1,
+ IO6S, 1,
+ IO7S, 1,
+ }
+
+ /* PM1 Event Block
+ * First word is PM1_Status, Second word is PM1_Enable
+ */
+ OperationRegion(P1EB, SystemIO, APEB, 0x04)
+ Field(P1EB, ByteAcc, NoLock, Preserve) {
+ TMST, 1,
+ , 3,
+ BMST, 1,
+ GBST, 1,
+ Offset(0x01),
+ PBST, 1,
+ , 1,
+ RTST, 1,
+ , 3,
+ PWST, 1,
+ SPWS, 1,
+ Offset(0x02),
+ TMEN, 1,
+ , 4,
+ GBEN, 1,
+ Offset(0x03),
+ PBEN, 1,
+ , 1,
+ RTEN, 1,
+ , 3,
+ PWDA, 1,
+ }
+
+ Scope(\_SB) {
+ /* PCIe Configuration Space for 16 busses */
+ OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */
+ Field(PCFG, ByteAcc, NoLock, Preserve) {
+ /* Byte offsets are computed using the following technique:
+ * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
+ * The 8 comes from 8 functions per device, and 4096 bytes per function config space
+ */
+ Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */
+ STB5, 32,
+ Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
+ PT0D, 1,
+ PT1D, 1,
+ PT2D, 1,
+ PT3D, 1,
+ PT4D, 1,
+ PT5D, 1,
+ PT6D, 1,
+ PT7D, 1,
+ PT8D, 1,
+ PT9D, 1,
+ Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */
+ SBIE, 1,
+ SBME, 1,
+ Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */
+ SBRI, 8,
+ Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */
+ SBB1, 32,
+ Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */
+ ,14,
+ P92E, 1, /* Port92 decode enable */
+ }
+
+ OperationRegion(SB5, SystemMemory, STB5, 0x1000)
+ Field(SB5, AnyAcc, NoLock, Preserve){
+ /* Port 0 */
+ Offset(0x120), /* Port 0 Task file status */
+ P0ER, 1,
+ , 2,
+ P0DQ, 1,
+ , 3,
+ P0BY, 1,
+ Offset(0x128), /* Port 0 Serial ATA status */
+ P0DD, 4,
+ , 4,
+ P0IS, 4,
+ Offset(0x12C), /* Port 0 Serial ATA control */
+ P0DI, 4,
+ Offset(0x130), /* Port 0 Serial ATA error */
+ , 16,
+ P0PR, 1,
+
+ /* Port 1 */
+ offset(0x1A0), /* Port 1 Task file status */
+ P1ER, 1,
+ , 2,
+ P1DQ, 1,
+ , 3,
+ P1BY, 1,
+ Offset(0x1A8), /* Port 1 Serial ATA status */
+ P1DD, 4,
+ , 4,
+ P1IS, 4,
+ Offset(0x1AC), /* Port 1 Serial ATA control */
+ P1DI, 4,
+ Offset(0x1B0), /* Port 1 Serial ATA error */
+ , 16,
+ P1PR, 1,
+
+ /* Port 2 */
+ Offset(0x220), /* Port 2 Task file status */
+ P2ER, 1,
+ , 2,
+ P2DQ, 1,
+ , 3,
+ P2BY, 1,
+ Offset(0x228), /* Port 2 Serial ATA status */
+ P2DD, 4,
+ , 4,
+ P2IS, 4,
+ Offset(0x22C), /* Port 2 Serial ATA control */
+ P2DI, 4,
+ Offset(0x230), /* Port 2 Serial ATA error */
+ , 16,
+ P2PR, 1,
+
+ /* Port 3 */
+ Offset(0x2A0), /* Port 3 Task file status */
+ P3ER, 1,
+ , 2,
+ P3DQ, 1,
+ , 3,
+ P3BY, 1,
+ Offset(0x2A8), /* Port 3 Serial ATA status */
+ P3DD, 4,
+ , 4,
+ P3IS, 4,
+ Offset(0x2AC), /* Port 3 Serial ATA control */
+ P3DI, 4,
+ Offset(0x2B0), /* Port 3 Serial ATA error */
+ , 16,
+ P3PR, 1,
+ }
+ }
+
+
+ #include "acpi/routing.asl"
+
+ Scope(\_SB) {
+
+ Method(CkOT, 0){
+
+ if(LNotEqual(OSTP, Ones)) {Return(OSTP)} /* OS version was already detected */
+
+ if(CondRefOf(\_OSI,Local1))
+ {
+ Store(1, OSTP) /* Assume some form of XP */
+ if (\_OSI("Windows 2006")) /* Vista */
+ {
+ Store(2, OSTP)
+ }
+ } else {
+ If(WCMP(\_OS,"Linux")) {
+ Store(3, OSTP) /* Linux */
+ } Else {
+ Store(4, OSTP) /* Gotta be WinCE */
+ }
+ }
+ Return(OSTP)
+ }
+
+ Method(_PIC, 0x01, NotSerialized)
+ {
+ If (Arg0)
+ {
+ \_SB.CIRQ()
+ }
+ Store(Arg0, PMOD)
+ }
+ Method(CIRQ, 0x00, NotSerialized){
+ Store(0, PINA)
+ Store(0, PINB)
+ Store(0, PINC)
+ Store(0, PIND)
+ Store(0, PINE)
+ Store(0, PINF)
+ Store(0, PING)
+ Store(0, PINH)
+ }
+
+ Name(IRQB, ResourceTemplate(){
+ IRQ(Level,ActiveLow,Shared){15}
+ })
+
+ Name(IRQP, ResourceTemplate(){
+ IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15}
+ })
+
+ Name(PITF, ResourceTemplate(){
+ IRQ(Level,ActiveLow,Exclusive){9}
+ })
+
+ Device(INTA) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 1)
+
+ Method(_STA, 0) {
+ if (PINA) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTA._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKA\\_DIS\n") */
+ Store(0, PINA)
+ } /* End Method(_SB.INTA._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKA\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTA._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKA\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PINA, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTA._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKA\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PINA)
+ } /* End Method(_SB.INTA._SRS) */
+ } /* End Device(INTA) */
+
+ Device(INTB) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 2)
+
+ Method(_STA, 0) {
+ if (PINB) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTB._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKB\\_DIS\n") */
+ Store(0, PINB)
+ } /* End Method(_SB.INTB._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKB\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTB._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKB\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PINB, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTB._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKB\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PINB)
+ } /* End Method(_SB.INTB._SRS) */
+ } /* End Device(INTB) */
+
+ Device(INTC) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 3)
+
+ Method(_STA, 0) {
+ if (PINC) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTC._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKC\\_DIS\n") */
+ Store(0, PINC)
+ } /* End Method(_SB.INTC._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKC\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTC._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKC\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PINC, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTC._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKC\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PINC)
+ } /* End Method(_SB.INTC._SRS) */
+ } /* End Device(INTC) */
+
+ Device(INTD) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 4)
+
+ Method(_STA, 0) {
+ if (PIND) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTD._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKD\\_DIS\n") */
+ Store(0, PIND)
+ } /* End Method(_SB.INTD._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKD\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTD._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKD\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PIND, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTD._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKD\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PIND)
+ } /* End Method(_SB.INTD._SRS) */
+ } /* End Device(INTD) */
+
+ Device(INTE) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 5)
+
+ Method(_STA, 0) {
+ if (PINE) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTE._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKE\\_DIS\n") */
+ Store(0, PINE)
+ } /* End Method(_SB.INTE._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKE\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTE._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKE\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PINE, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTE._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKE\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PINE)
+ } /* End Method(_SB.INTE._SRS) */
+ } /* End Device(INTE) */
+
+ Device(INTF) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 6)
+
+ Method(_STA, 0) {
+ if (PINF) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTF._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKF\\_DIS\n") */
+ Store(0, PINF)
+ } /* End Method(_SB.INTF._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKF\\_PRS\n") */
+ Return(PITF)
+ } /* Method(_SB.INTF._PRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKF\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PINF, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTF._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKF\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PINF)
+ } /* End Method(_SB.INTF._SRS) */
+ } /* End Device(INTF) */
+
+ Device(INTG) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 7)
+
+ Method(_STA, 0) {
+ if (PING) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTG._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKG\\_DIS\n") */
+ Store(0, PING)
+ } /* End Method(_SB.INTG._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKG\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTG._CRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKG\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PING, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTG._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKG\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PING)
+ } /* End Method(_SB.INTG._SRS) */
+ } /* End Device(INTG) */
+
+ Device(INTH) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 8)
+
+ Method(_STA, 0) {
+ if (PINH) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTH._STA) */
+
+ Method(_DIS ,0) {
+ /* DBGO("\\_SB\\LNKH\\_DIS\n") */
+ Store(0, PINH)
+ } /* End Method(_SB.INTH._DIS) */
+
+ Method(_PRS ,0) {
+ /* DBGO("\\_SB\\LNKH\\_PRS\n") */
+ Return(IRQP)
+ } /* Method(_SB.INTH._CRS) */
+
+ Method(_CRS ,0) {
+ /* DBGO("\\_SB\\LNKH\\_CRS\n") */
+ CreateWordField(IRQB, 0x1, IRQN)
+ ShiftLeft(1, PINH, IRQN)
+ Return(IRQB)
+ } /* Method(_SB.INTH._CRS) */
+
+ Method(_SRS, 1) {
+ /* DBGO("\\_SB\\LNKH\\_CRS\n") */
+ CreateWordField(ARG0, 1, IRQM)
+
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQM, Local0)
+ if (Local0) {
+ Decrement(Local0)
+ }
+ Store(Local0, PINH)
+ } /* End Method(_SB.INTH._SRS) */
+ } /* End Device(INTH) */
+
+ } /* End Scope(_SB) */
+
+
+ /* Supported sleep states: */
+ Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */
+
+ If (LAnd(SSFG, 0x01)) {
+ Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */
+ }
+ If (LAnd(SSFG, 0x02)) {
+ Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */
+ }
+ If (LAnd(SSFG, 0x04)) {
+ Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */
+ }
+ If (LAnd(SSFG, 0x08)) {
+ Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */
+ }
+
+ Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */
+
+ Name(\_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */
+ Name(CSMS, 0) /* Current System State */
+
+ /* Wake status package */
+ Name(WKST,Package(){Zero, Zero})
+
+ /*
+ * \_PTS - Prepare to Sleep method
+ *
+ * Entry:
+ * Arg0=The value of the sleeping state S1=1, S2=2, etc
+ *
+ * Exit:
+ * -none-
+ *
+ * The _PTS control method is executed at the beginning of the sleep process
+ * for S1-S5. The sleeping value is passed to the _PTS control method. This
+ * control method may be executed a relatively long time before entering the
+ * sleep state and the OS may abort the operation without notification to
+ * the ACPI driver. This method cannot modify the configuration or power
+ * state of any device in the system.
+ */
+ Method(\_PTS, 1) {
+ /* DBGO("\\_PTS\n") */
+ /* DBGO("From S0 to S") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+
+ /* Don't allow PCIRST# to reset USB */
+ if (LEqual(Arg0,3)){
+ Store(0,URRE)
+ }
+
+ /* Clear sleep SMI status flag and enable sleep SMI trap. */
+ /*Store(One, CSSM)
+ Store(One, SSEN)*/
+
+ /* On older chips, clear PciExpWakeDisEn */
+ /*if (LLessEqual(\_SB.SBRI, 0x13)) {
+ * Store(0,\_SB.PWDE)
+ *}
+ */
+
+ /* Clear wake status structure. */
+ Store(0, Index(WKST,0))
+ Store(0, Index(WKST,1))
+ \_SB.PCI0.SIOS (Arg0)
+ } /* End Method(\_PTS) */
+
+ /*
+ * The following method results in a "not a valid reserved NameSeg"
+ * warning so I have commented it out for the duration. It isn't
+ * used, so it could be removed.
+ *
+ *
+ * \_GTS OEM Going To Sleep method
+ *
+ * Entry:
+ * Arg0=The value of the sleeping state S1=1, S2=2
+ *
+ * Exit:
+ * -none-
+ *
+ * Method(\_GTS, 1) {
+ * DBGO("\\_GTS\n")
+ * DBGO("From S0 to S")
+ * DBGO(Arg0)
+ * DBGO("\n")
+ * }
+ */
+
+ /*
+ * \_BFS OEM Back From Sleep method
+ *
+ * Entry:
+ * Arg0=The value of the sleeping state S1=1, S2=2
+ *
+ * Exit:
+ * -none-
+ */
+ Method(\_BFS, 1) {
+ /* DBGO("\\_BFS\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+ }
+
+ /*
+ * \_WAK System Wake method
+ *
+ * Entry:
+ * Arg0=The value of the sleeping state S1=1, S2=2
+ *
+ * Exit:
+ * Return package of 2 DWords
+ * Dword 1 - Status
+ * 0x00000000 wake succeeded
+ * 0x00000001 Wake was signaled but failed due to lack of power
+ * 0x00000002 Wake was signaled but failed due to thermal condition
+ * Dword 2 - Power Supply state
+ * if non-zero the effective S-state the power supply entered
+ */
+ Method(\_WAK, 1) {
+ /* DBGO("\\_WAK\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+
+ /* Re-enable HPET */
+ Store(1,HPDE)
+
+ /* Restore PCIRST# so it resets USB */
+ if (LEqual(Arg0,3)){
+ Store(1,URRE)
+ }
+
+ /* Arbitrarily clear PciExpWakeStatus */
+ Store(PWST, PWST)
+
+ /* if(DeRefOf(Index(WKST,0))) {
+ * Store(0, Index(WKST,1))
+ * } else {
+ * Store(Arg0, Index(WKST,1))
+ * }
+ */
+ \_SB.PCI0.SIOW (Arg0)
+ Return(WKST)
+ } /* End Method(\_WAK) */
+
+ Scope(\_GPE) { /* Start Scope GPE */
+ /* General event 0 */
+ /* Method(_L00) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 1 */
+ /* Method(_L01) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 2 */
+ /* Method(_L02) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 3 */
+ Method(_L03) {
+ /* DBGO("\\_GPE\\_L00\n") */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* General event 4 */
+ /* Method(_L04) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 5 */
+ /* Method(_L05) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 6 - Used for GPM6, moved to USB.asl */
+ /* Method(_L06) {
+ * DBGO("\\_GPE\\_L00\n")
+ * }
+ */
+
+ /* General event 7 - Used for GPM7, moved to USB.asl */
+ /* Method(_L07) {
+ * DBGO("\\_GPE\\_L07\n")
+ * }
+ */
+
+ /* Legacy PM event */
+ Method(_L08) {
+ /* DBGO("\\_GPE\\_L08\n") */
+ }
+
+ /* Temp warning (TWarn) event */
+ Method(_L09) {
+ /* DBGO("\\_GPE\\_L09\n") */
+ Notify (\_TZ.TZ00, 0x80)
+ }
+
+ /* Reserved */
+ /* Method(_L0A) {
+ * DBGO("\\_GPE\\_L0A\n")
+ * }
+ */
+
+ /* USB controller PME# */
+ Method(_L0B) {
+ /* DBGO("\\_GPE\\_L0B\n") */
+ Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* AC97 controller PME# */
+ /* Method(_L0C) {
+ * DBGO("\\_GPE\\_L0C\n")
+ * }
+ */
+
+ /* OtherTherm PME# */
+ /* Method(_L0D) {
+ * DBGO("\\_GPE\\_L0D\n")
+ * }
+ */
+
+ /* GPM9 SCI event - Moved to USB.asl */
+ /* Method(_L0E) {
+ * DBGO("\\_GPE\\_L0E\n")
+ * }
+ */
+
+ /* PCIe HotPlug event */
+ /* Method(_L0F) {
+ * DBGO("\\_GPE\\_L0F\n")
+ * }
+ */
+
+ /* ExtEvent0 SCI event */
+ Method(_L10) {
+ /* DBGO("\\_GPE\\_L10\n") */
+ }
+
+
+ /* ExtEvent1 SCI event */
+ Method(_L11) {
+ /* DBGO("\\_GPE\\_L11\n") */
+ }
+
+ /* PCIe PME# event */
+ /* Method(_L12) {
+ * DBGO("\\_GPE\\_L12\n")
+ * }
+ */
+
+ /* GPM0 SCI event - Moved to USB.asl */
+ /* Method(_L13) {
+ * DBGO("\\_GPE\\_L13\n")
+ * }
+ */
+
+ /* GPM1 SCI event - Moved to USB.asl */
+ /* Method(_L14) {
+ * DBGO("\\_GPE\\_L14\n")
+ * }
+ */
+
+ /* GPM2 SCI event - Moved to USB.asl */
+ /* Method(_L15) {
+ * DBGO("\\_GPE\\_L15\n")
+ * }
+ */
+
+ /* GPM3 SCI event - Moved to USB.asl */
+ /* Method(_L16) {
+ * DBGO("\\_GPE\\_L16\n")
+ * }
+ */
+
+ /* GPM8 SCI event - Moved to USB.asl */
+ /* Method(_L17) {
+ * DBGO("\\_GPE\\_L17\n")
+ * }
+ */
+
+ /* GPIO0 or GEvent8 event */
+ Method(_L18) {
+ /* DBGO("\\_GPE\\_L18\n") */
+ Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* GPM4 SCI event - Moved to USB.asl */
+ /* Method(_L19) {
+ * DBGO("\\_GPE\\_L19\n")
+ * }
+ */
+
+ /* GPM5 SCI event - Moved to USB.asl */
+ /* Method(_L1A) {
+ * DBGO("\\_GPE\\_L1A\n")
+ * }
+ */
+
+ /* Azalia SCI event */
+ Method(_L1B) {
+ /* DBGO("\\_GPE\\_L1B\n") */
+ Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* GPM6 SCI event - Reassigned to _L06 */
+ /* Method(_L1C) {
+ * DBGO("\\_GPE\\_L1C\n")
+ * }
+ */
+
+ /* GPM7 SCI event - Reassigned to _L07 */
+ /* Method(_L1D) {
+ * DBGO("\\_GPE\\_L1D\n")
+ * }
+ */
+
+ /* GPIO2 or GPIO66 SCI event */
+ /* Method(_L1E) {
+ * DBGO("\\_GPE\\_L1E\n")
+ * }
+ */
+
+ /* SATA SCI event - Moved to sata.asl */
+ /* Method(_L1F) {
+ * DBGO("\\_GPE\\_L1F\n")
+ * }
+ */
+
+ } /* End Scope GPE */
+
+ #include "acpi/usb.asl"
+
+ /* South Bridge */
+ Scope(\_SB) { /* Start \_SB scope */
+ #include "../../../arch/x86/acpi/globutil.asl" /* global utility methods expected within the \_SB scope */
+
+ /* _SB.PCI0 */
+ /* Note: Only need HID on Primary Bus */
+ Device(PCI0) {
+ External (TOM1)
+ External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */
+ Name(_HID, EISAID("PNP0A03"))
+ Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */
+ Method(_BBN, 0) { /* Bus number = 0 */
+ Return(0)
+ }
+ Method(_STA, 0) {
+ /* DBGO("\\_SB\\PCI0\\_STA\n") */
+ Return(0x0B) /* Status is visible */
+ }
+
+ Method(_PRT,0) {
+ If(PMOD){ Return(APR0) } /* APIC mode */
+ Return (PR0) /* PIC Mode */
+ } /* end _PRT */
+
+ /* Describe the Northbridge devices */
+ Device(AMRT) {
+ Name(_ADR, 0x00000000)
+ } /* end AMRT */
+
+ /* The internal GFX bridge */
+ Device(AGPB) {
+ Name(_ADR, 0x00010000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ Return (APR1)
+ }
+ } /* end AGPB */
+
+ /* The external GFX bridge */
+ Device(PBR2) {
+ Name(_ADR, 0x00020000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS2) } /* APIC mode */
+ Return (PS2) /* PIC Mode */
+ } /* end _PRT */
+ } /* end PBR2 */
+
+ /* Dev3 is also an external GFX bridge, not used in Herring */
+
+ Device(PBR4) {
+ Name(_ADR, 0x00040000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS4) } /* APIC mode */
+ Return (PS4) /* PIC Mode */
+ } /* end _PRT */
+ } /* end PBR4 */
+
+ Device(PBR5) {
+ Name(_ADR, 0x00050000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS5) } /* APIC mode */
+ Return (PS5) /* PIC Mode */
+ } /* end _PRT */
+ } /* end PBR5 */
+
+ Device(PBR6) {
+ Name(_ADR, 0x00060000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS6) } /* APIC mode */
+ Return (PS6) /* PIC Mode */
+ } /* end _PRT */
+ } /* end PBR6 */
+
+ /* The onboard EtherNet chip */
+ Device(PBR7) {
+ Name(_ADR, 0x00070000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS7) } /* APIC mode */
+ Return (PS7) /* PIC Mode */
+ } /* end _PRT */
+ } /* end PBR7 */
+
+ /* GPP */
+ Device(PBR9) {
+ Name(_ADR, 0x00090000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APS9) } /* APIC mode */
+ Return (PS9) /* PIC Mode */
+ } /* end _PRT */
+ } /* end PBR9 */
+
+ Device(PBRa) {
+ Name(_ADR, 0x000A0000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(APSa) } /* APIC mode */
+ Return (PSa) /* PIC Mode */
+ } /* end _PRT */
+ } /* end PBRa */
+
+
+ /* PCI slot 1, 2, 3 */
+ Device(PIBR) {
+ Name(_ADR, 0x00140004)
+ Name(_PRW, Package() {0x18, 4})
+
+ Method(_PRT, 0) {
+ Return (PCIB)
+ }
+ }
+
+ /* Describe the Southbridge devices */
+ Device(STCR) {
+ Name(_ADR, 0x00110000)
+ #include "acpi/sata.asl"
+ } /* end STCR */
+
+ Device(UOH1) {
+ Name(_ADR, 0x00130000)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UOH1 */
+
+ Device(UOH2) {
+ Name(_ADR, 0x00130001)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UOH2 */
+
+ Device(UOH3) {
+ Name(_ADR, 0x00130002)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UOH3 */
+
+ Device(UOH4) {
+ Name(_ADR, 0x00130003)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UOH4 */
+
+ Device(UOH5) {
+ Name(_ADR, 0x00130004)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UOH5 */
+
+ Device(UEH1) {
+ Name(_ADR, 0x00130005)
+ Name(_PRW, Package() {0x0B, 3})
+ } /* end UEH1 */
+
+ Device(SBUS) {
+ Name(_ADR, 0x00140000)
+ } /* end SBUS */
+
+ /* Primary (and only) IDE channel */
+ Device(IDEC) {
+ Name(_ADR, 0x00140001)
+ #include "acpi/ide.asl"
+ } /* end IDEC */
+
+ Device(AZHD) {
+ Name(_ADR, 0x00140002)
+ OperationRegion(AZPD, PCI_Config, 0x00, 0x100)
+ Field(AZPD, AnyAcc, NoLock, Preserve) {
+ offset (0x42),
+ NSDI, 1,
+ NSDO, 1,
+ NSEN, 1,
+ offset (0x44),
+ IPCR, 4,
+ offset (0x54),
+ PWST, 2,
+ , 6,
+ PMEB, 1,
+ , 6,
+ PMST, 1,
+ offset (0x62),
+ MMCR, 1,
+ offset (0x64),
+ MMLA, 32,
+ offset (0x68),
+ MMHA, 32,
+ offset (0x6C),
+ MMDT, 16,
+ }
+
+ Method(_INI) {
+ If(LEqual(OSTP,3)){ /* If we are running Linux */
+ Store(zero, NSEN)
+ Store(one, NSDO)
+ Store(one, NSDI)
+ }
+ }
+ } /* end AZHD */
+
+ Device(LIBR) {
+ Name(_ADR, 0x00140003)
+ /* Method(_INI) {
+ * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n")
+ } */ /* End Method(_SB.SBRDG._INI) */
+
+ /* Real Time Clock Device */
+ Device(RTC0) {
+ Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */
+ Name(_CRS, ResourceTemplate() {
+ IRQNoFlags(){8}
+ IO(Decode16,0x0070, 0x0070, 0, 2)
+ /* IO(Decode16,0x0070, 0x0070, 0, 4) */
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
+
+ Device(TMR) { /* Timer */
+ Name(_HID,EISAID("PNP0100")) /* System Timer */
+ Name(_CRS, ResourceTemplate() {
+ IRQNoFlags(){0}
+ IO(Decode16, 0x0040, 0x0040, 0, 4)
+ /* IO(Decode16, 0x0048, 0x0048, 0, 4) */
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */
+
+ Device(SPKR) { /* Speaker */
+ Name(_HID,EISAID("PNP0800")) /* AT style speaker */
+ Name(_CRS, ResourceTemplate() {
+ IO(Decode16, 0x0061, 0x0061, 0, 1)
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */
+
+ Device(PIC) {
+ Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */
+ Name(_CRS, ResourceTemplate() {
+ IRQNoFlags(){2}
+ IO(Decode16,0x0020, 0x0020, 0, 2)
+ IO(Decode16,0x00A0, 0x00A0, 0, 2)
+ /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */
+ /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */
+
+ Device(MAD) { /* 8257 DMA */
+ Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */
+ Name(_CRS, ResourceTemplate() {
+ DMA(Compatibility,BusMaster,Transfer8){4}
+ IO(Decode16, 0x0000, 0x0000, 0x10, 0x10)
+ IO(Decode16, 0x0081, 0x0081, 0x01, 0x03)
+ IO(Decode16, 0x0087, 0x0087, 0x01, 0x01)
+ IO(Decode16, 0x0089, 0x0089, 0x01, 0x03)
+ IO(Decode16, 0x008F, 0x008F, 0x01, 0x01)
+ IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20)
+ }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */
+ } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */
+
+ Device(COPR) {
+ Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */
+ Name(_CRS, ResourceTemplate() {
+ IO(Decode16, 0x00F0, 0x00F0, 0, 0x10)
+ IRQNoFlags(){13}
+ })
+ } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
+
+ Device(HPTM) {
+ Name(_HID,EISAID("PNP0103"))
+ Name(CRS,ResourceTemplate() {
+ Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */
+ })
+ Method(_STA, 0) {
+ Return(0x0F) /* sata is visible */
+ }
+ Method(_CRS, 0) {
+ CreateDwordField(CRS, ^HPT._BAS, HPBA)
+ Store(HPBA, HPBA)
+ Return(CRS)
+ }
+ } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
+ } /* end LIBR */
+
+ Device(HPBR) {
+ Name(_ADR, 0x00140004)
+ } /* end HostPciBr */
+
+ Device(ACAD) {
+ Name(_ADR, 0x00140005)
+ } /* end Ac97audio */
+
+ Device(ACMD) {
+ Name(_ADR, 0x00140006)
+ } /* end Ac97modem */
+
+ /* ITE8718 Support */
+ OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */
+ Field (IOID, ByteAcc, NoLock, Preserve)
+ {
+ SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */
+ }
+
+ IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve)
+ {
+ Offset (0x07),
+ LDN, 8, /* Logical Device Number */
+ Offset (0x20),
+ CID1, 8, /* Chip ID Byte 1, 0x87 */
+ CID2, 8, /* Chip ID Byte 2, 0x12 */
+ Offset (0x30),
+ ACTR, 8, /* Function activate */
+ Offset (0xF0),
+ APC0, 8, /* APC/PME Event Enable Register */
+ APC1, 8, /* APC/PME Status Register */
+ APC2, 8, /* APC/PME Control Register 1 */
+ APC3, 8, /* Environment Controller Special Configuration Register */
+ APC4, 8 /* APC/PME Control Register 2 */
+ }
+
+ /* Enter the 8718 MB PnP Mode */
+ Method (EPNP)
+ {
+ Store(0x87, SIOI)
+ Store(0x01, SIOI)
+ Store(0x55, SIOI)
+ Store(0x55, SIOI) /* 8718 magic number */
+ }
+ /* Exit the 8718 MB PnP Mode */
+ Method (XPNP)
+ {
+ Store (0x02, SIOI)
+ Store (0x02, SIOD)
+ }
+ /*
+ * Keyboard PME is routed to SB700 Gevent3. We can wake
+ * up the system by pressing the key.
+ */
+ Method (SIOS, 1)
+ {
+ /* We only enable KBD PME for S5. */
+ If (LLess (Arg0, 0x05))
+ {
+ EPNP()
+ /* DBGO("8718F\n") */
+
+ Store (0x4, LDN)
+ Store (One, ACTR) /* Enable EC */
+ /*
+ Store (0x4, LDN)
+ Store (0x04, APC4)
+ */ /* falling edge. which mode? Not sure. */
+
+ Store (0x4, LDN)
+ Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */
+ Store (0x4, LDN)
+ Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */
+
+ XPNP()
+ }
+ }
+ Method (SIOW, 1)
+ {
+ EPNP()
+ Store (0x4, LDN)
+ Store (Zero, APC0) /* disable keyboard PME */
+ Store (0x4, LDN)
+ Store (0xFF, APC1) /* clear keyboard PME status */
+ XPNP()
+ }
+
+ Name(CRES, ResourceTemplate() {
+ IO(Decode16, 0x0CF8, 0x0CF8, 1, 8)
+
+ WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, /* address granularity */
+ 0x0000, /* range minimum */
+ 0x0CF7, /* range maximum */
+ 0x0000, /* translation */
+ 0x0CF8 /* length */
+ )
+
+ WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0000, /* address granularity */
+ 0x0D00, /* range minimum */
+ 0xFFFF, /* range maximum */
+ 0x0000, /* translation */
+ 0xF300 /* length */
+ )
+
+ Memory32Fixed(READWRITE, 0, 0xA0000, BSMM)
+ Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */
+ Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */
+ Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */
+
+ /* DRAM Memory from 1MB to TopMem */
+ Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */
+
+ /* BIOS space just below 4GB */
+ DWORDMemory(
+ ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+ 0x00, /* Granularity */
+ 0x00000000, /* Min */
+ 0x00000000, /* Max */
+ 0x00000000, /* Translation */
+ 0x00000001, /* Max-Min, RLEN */
+ ,,
+ PCBM
+ )
+
+ /* DRAM memory from 4GB to TopMem2 */
+ QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+ 0x00000000, /* Granularity */
+ 0x00000000, /* Min */
+ 0x00000000, /* Max */
+ 0x00000000, /* Translation */
+ 0x00000001, /* Max-Min, RLEN */
+ ,,
+ DMHI
+ )
+
+ /* BIOS space just below 16EB */
+ QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+ 0x00000000, /* Granularity */
+ 0x00000000, /* Min */
+ 0x00000000, /* Max */
+ 0x00000000, /* Translation */
+ 0x00000001, /* Max-Min, RLEN */
+ ,,
+ PEBM
+ )
+
+ }) /* End Name(_SB.PCI0.CRES) */
+
+ Method(_CRS, 0) {
+ /* DBGO("\\_SB\\PCI0\\_CRS\n") */
+
+ CreateDWordField(CRES, ^EMM1._BAS, EM1B)
+ CreateDWordField(CRES, ^EMM1._LEN, EM1L)
+ CreateDWordField(CRES, ^DMLO._BAS, DMLB)
+ CreateDWordField(CRES, ^DMLO._LEN, DMLL)
+ CreateDWordField(CRES, ^PCBM._MIN, PBMB)
+ CreateDWordField(CRES, ^PCBM._LEN, PBML)
+
+ CreateQWordField(CRES, ^DMHI._MIN, DMHB)
+ CreateQWordField(CRES, ^DMHI._LEN, DMHL)
+ CreateQWordField(CRES, ^PEBM._MIN, EBMB)
+ CreateQWordField(CRES, ^PEBM._LEN, EBML)
+
+ If(LGreater(LOMH, 0xC0000)){
+ Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */
+ Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */
+ }
+
+ /* Set size of memory from 1MB to TopMem */
+ Subtract(TOM1, 0x100000, DMLL)
+
+ /*
+ * If(LNotEqual(TOM2, 0x00000000)){
+ * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2
+ * ShiftLeft(TOM2, 20, Local0)
+ * Subtract(Local0, 0x100000000, DMHL)
+ * }
+ */
+
+ /* If there is no memory above 4GB, put the BIOS just below 4GB */
+ If(LEqual(TOM2, 0x00000000)){
+ Store(PBAD,PBMB) /* Reserve the "BIOS" space */
+ Store(PBLN,PBML)
+ }
+ Else { /* Otherwise, put the BIOS just below 16EB */
+ ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */
+ Store(PBLN,EBML)
+ }
+
+ Return(CRES) /* note to change the Name buffer */
+ } /* end of Method(_SB.PCI0._CRS) */
+
+ /*
+ *
+ * FIRST METHOD CALLED UPON BOOT
+ *
+ * 1. If debugging, print current OS and ACPI interpreter.
+ * 2. Get PCI Interrupt routing from ACPI VSM, this
+ * value is based on user choice in BIOS setup.
+ */
+ Method(_INI, 0) {
+ /* DBGO("\\_SB\\_INI\n") */
+ /* DBGO(" DSDT.ASL code from ") */
+ /* DBGO(__DATE__) */
+ /* DBGO(" ") */
+ /* DBGO(__TIME__) */
+ /* DBGO("\n Sleep states supported: ") */
+ /* DBGO("\n") */
+ /* DBGO(" \\_OS=") */
+ /* DBGO(\_OS) */
+ /* DBGO("\n \\_REV=") */
+ /* DBGO(\_REV) */
+ /* DBGO("\n") */
+
+ /* Determine the OS we're running on */
+ CkOT()
+
+ /* On older chips, clear PciExpWakeDisEn */
+ /*if (LLessEqual(\SBRI, 0x13)) {
+ * Store(0,\PWDE)
+ * }
+ */
+ } /* End Method(_SB._INI) */
+ } /* End Device(PCI0) */
+
+ Device(PWRB) { /* Start Power button device */
+ Name(_HID, EISAID("PNP0C0C"))
+ Name(_UID, 0xAA)
+ Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */
+ Name(_STA, 0x0B) /* sata is invisible */
+ }
+ } /* End \_SB scope */
+
+ Scope(\_SI) {
+ Method(_SST, 1) {
+ /* DBGO("\\_SI\\_SST\n") */
+ /* DBGO(" New Indicator state: ") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+ }
+ } /* End Scope SI */
+
+ /* SMBUS Support */
+ Mutex (SBX0, 0x00)
+ OperationRegion (SMB0, SystemIO, 0xB00, 0x0C)
+ Field (SMB0, ByteAcc, NoLock, Preserve) {
+ HSTS, 8, /* SMBUS status */
+ SSTS, 8, /* SMBUS slave status */
+ HCNT, 8, /* SMBUS control */
+ HCMD, 8, /* SMBUS host cmd */
+ HADD, 8, /* SMBUS address */
+ DAT0, 8, /* SMBUS data0 */
+ DAT1, 8, /* SMBUS data1 */
+ BLKD, 8, /* SMBUS block data */
+ SCNT, 8, /* SMBUS slave control */
+ SCMD, 8, /* SMBUS shaow cmd */
+ SEVT, 8, /* SMBUS slave event */
+ SDAT, 8 /* SMBUS slave data */
+ }
+
+ Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */
+ Store (0x1E, HSTS)
+ Store (0xFA, Local0)
+ While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) {
+ Stall (0x64)
+ Decrement (Local0)
+ }
+
+ Return (Local0)
+ }
+
+ Method (SWTC, 1, NotSerialized) {
+ Store (Arg0, Local0)
+ Store (0x07, Local2)
+ Store (One, Local1)
+ While (LEqual (Local1, One)) {
+ Store (And (HSTS, 0x1E), Local3)
+ If (LNotEqual (Local3, Zero)) { /* read sucess */
+ If (LEqual (Local3, 0x02)) {
+ Store (Zero, Local2)
+ }
+
+ Store (Zero, Local1)
+ }
+ Else {
+ If (LLess (Local0, 0x0A)) { /* read failure */
+ Store (0x10, Local2)
+ Store (Zero, Local1)
+ }
+ Else {
+ Sleep (0x0A) /* 10 ms, try again */
+ Subtract (Local0, 0x0A, Local0)
+ }
+ }
+ }
+
+ Return (Local2)
+ }
+
+ Method (SMBR, 3, NotSerialized) {
+ Store (0x07, Local0)
+ If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) {
+ Store (WCLR (), Local0) /* clear SMBUS status register before read data */
+ If (LEqual (Local0, Zero)) {
+ Release (SBX0)
+ Return (0x0)
+ }
+
+ Store (0x1F, HSTS)
+ Store (Or (ShiftLeft (Arg1, One), One), HADD)
+ Store (Arg2, HCMD)
+ If (LEqual (Arg0, 0x07)) {
+ Store (0x48, HCNT) /* read byte */
+ }
+
+ Store (SWTC (0x03E8), Local1) /* 1000 ms */
+ If (LEqual (Local1, Zero)) {
+ If (LEqual (Arg0, 0x07)) {
+ Store (DAT0, Local0)
+ }
+ }
+ Else {
+ Store (Local1, Local0)
+ }
+
+ Release (SBX0)
+ }
+
+ /* DBGO("the value of SMBusData0 register ") */
+ /* DBGO(Arg2) */
+ /* DBGO(" is ") */
+ /* DBGO(Local0) */
+ /* DBGO("\n") */
+
+ Return (Local0)
+ }
+
+ /* THERMAL */
+ Scope(\_TZ) {
+ Name (KELV, 2732)
+ Name (THOT, 800)
+ Name (TCRT, 850)
+
+ ThermalZone(TZ00) {
+ Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */
+ /* DBGO("\\_TZ\\TZ00\\_AC0\n") */
+ Return(Add(0, 2730))
+ }
+ Method(_AL0,0) { /* Returns package of cooling device to turn on */
+ /* DBGO("\\_TZ\\TZ00\\_AL0\n") */
+ Return(Package() {\_TZ.TZ00.FAN0})
+ }
+ Device (FAN0) {
+ Name(_HID, EISAID("PNP0C0B"))
+ Name(_PR0, Package() {PFN0})
+ }
+
+ PowerResource(PFN0,0,0) {
+ Method(_STA) {
+ Store(0xF,Local0)
+ Return(Local0)
+ }
+ Method(_ON) {
+ /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */
+ }
+ Method(_OFF) {
+ /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */
+ }
+ }
+
+ Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */
+ /* DBGO("\\_TZ\\TZ00\\_HOT\n") */
+ Return (Add (THOT, KELV))
+ }
+ Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */
+ /* DBGO("\\_TZ\\TZ00\\_CRT\n") */
+ Return (Add (TCRT, KELV))
+ }
+ Method(_TMP,0) { /* return current temp of this zone */
+ Store (SMBR (0x07, 0x4C,, 0x00), Local0)
+ If (LGreater (Local0, 0x10)) {
+ Store (Local0, Local1)
+ }
+ Else {
+ Add (Local0, THOT, Local0)
+ Return (Add (400, KELV))
+ }
+
+ Store (SMBR (0x07, 0x4C, 0x01), Local0)
+ /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */
+ /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */
+ If (LGreater (Local0, 0x10)) {
+ If (LGreater (Local0, Local1)) {
+ Store (Local0, Local1)
+ }
+
+ Multiply (Local1, 10, Local1)
+ Return (Add (Local1, KELV))
+ }
+ Else {
+ Add (Local0, THOT, Local0)
+ Return (Add (400 , KELV))
+ }
+ } /* end of _TMP */
+ } /* end of TZ00 */
+ }
+}
+/* End of ASL file */
diff --git a/src/mainboard/asus/m4a785t-m/get_bus_conf.c b/src/mainboard/asus/m4a785t-m/get_bus_conf.c
new file mode 100644
index 0000000000..577b51c8f0
--- /dev/null
+++ b/src/mainboard/asus/m4a785t-m/get_bus_conf.c
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "../m4a785-m/get_bus_conf.c"
diff --git a/src/mainboard/asus/m4a785t-m/irq_tables.c b/src/mainboard/asus/m4a785t-m/irq_tables.c
new file mode 100644
index 0000000000..b4c030f3d8
--- /dev/null
+++ b/src/mainboard/asus/m4a785t-m/irq_tables.c
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "../m4a785-m/irq_tables.c"
diff --git a/src/mainboard/asus/m4a785t-m/mainboard.c b/src/mainboard/asus/m4a785t-m/mainboard.c
new file mode 100644
index 0000000000..76a2a68313
--- /dev/null
+++ b/src/mainboard/asus/m4a785t-m/mainboard.c
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "../m4a785-m/mainboard.c"
diff --git a/src/mainboard/asus/m4a785t-m/mptable.c b/src/mainboard/asus/m4a785t-m/mptable.c
new file mode 100644
index 0000000000..c6e4b88bd7
--- /dev/null
+++ b/src/mainboard/asus/m4a785t-m/mptable.c
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "../m4a785-m/mptable.c"
diff --git a/src/mainboard/asus/m4a785t-m/romstage.c b/src/mainboard/asus/m4a785t-m/romstage.c
new file mode 100644
index 0000000000..43cd52380e
--- /dev/null
+++ b/src/mainboard/asus/m4a785t-m/romstage.c
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "../m4a785-m/romstage.c"
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 18:50:29 +0000