summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorAaron Durbin <adurbin@chromium.org>2013-07-24 16:02:14 -0500
committerPatrick Georgi <patrick@georgi-clan.de>2013-12-21 10:49:11 +0100
commitc422002b5f819de97d12dfec16cc55488f28642e (patch)
tree94bcdb8acb9a3ca42ec6049de023ca1f8e0dcf18 /src
parent980180962a1855220de08779fa4697c78757614a (diff)
downloadcoreboot-c422002b5f819de97d12dfec16cc55488f28642e.tar.xz
tpm: provide explicit tpm register access
An issue was observed using a specific vendor's TPM in that it chokes on access to registers that are not explicitly defined in the PC client specification. The previous driver used generic access functions for reading and writing registers. However, issues come to play when reading from the status register. It read it as a 32-bit value, but that read address 0x1b which is not defined in the spec. Instead of using generic access functions for the tpm registers provide explicit ones. To that end provide more high level wrapper functions to perform the semantic access required. Change-Id: I781b31723f819e1387d7aa25512c83780ea0877f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/63243 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4388 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Diffstat (limited to 'src')
-rw-r--r--src/drivers/pc80/tpm.c264
1 files changed, 164 insertions, 100 deletions
diff --git a/src/drivers/pc80/tpm.c b/src/drivers/pc80/tpm.c
index b8ed3f1635..f581ab49d3 100644
--- a/src/drivers/pc80/tpm.c
+++ b/src/drivers/pc80/tpm.c
@@ -44,6 +44,10 @@
printk(BIOS_DEBUG, PREFIX); \
printk(BIOS_DEBUG, fmt , ##args); \
}
+#define TPM_DEBUG_IO_READ(reg_, val_) \
+ TPM_DEBUG("Read reg 0x%x returns 0x%x\n", (reg_), (val_))
+#define TPM_DEBUG_IO_WRITE(reg_, val_) \
+ TPM_DEBUG("Write reg 0x%x with 0x%x\n", (reg_), (val_))
#define printf(x...) printk(BIOS_ERR, x)
#define min(a,b) MIN(a,b)
@@ -70,6 +74,7 @@
#define TIS_REG_INT_STATUS 0x10
#define TIS_REG_INTF_CAPABILITY 0x14
#define TIS_REG_STS 0x18
+#define TIS_REG_BURST_COUNT 0x19
#define TIS_REG_DATA_FIFO 0x24
#define TIS_REG_DID_VID 0xf00
#define TIS_REG_RID 0xf04
@@ -90,9 +95,6 @@
#define TIS_ACCESS_REQUEST_USE (1 << 1) /* 0x02 */
#define TIS_ACCESS_TPM_ESTABLISHMENT (1 << 0) /* 0x01 */
-#define TIS_STS_BURST_COUNT_MASK (0xffff)
-#define TIS_STS_BURST_COUNT_SHIFT (8)
-
/*
* Error value returned if a tpm register does not enter the expected state
* after continuous polling. No actual TPM register reading ever returns ~0,
@@ -107,10 +109,6 @@
/* 1 second is plenty for anything TPM does.*/
#define MAX_DELAY_US (1000 * 1000)
-/* Retrieve burst count value out of the status register contents. */
-#define BURST_COUNT(status) ((u16)(((status) >> TIS_STS_BURST_COUNT_SHIFT) & \
- TIS_STS_BURST_COUNT_MASK))
-
/*
* Structures defined below allow creating descriptions of TPM vendor/device
* ID information for run time discovery. The only device the system knows
@@ -160,71 +158,165 @@ static const struct vendor_name vendor_names[] = {
*/
static u32 vendor_dev_id CAR_GLOBAL;
-static int is_byte_reg(u32 reg)
+static inline u8 tpm_read_status(int locality)
{
- /*
- * These TPM registers are 8 bits wide and as such require byte access
- * on writes and truncated value on reads.
- */
- return ((reg == TIS_REG_ACCESS) ||
- (reg == TIS_REG_INT_VECTOR) ||
- (reg == TIS_REG_DATA_FIFO));
+ u8 value = readb(TIS_REG(locality, TIS_REG_STS));
+ TPM_DEBUG_IO_READ(TIS_REG_STS, value);
+ return value;
}
-/* TPM access functions are carved out to make tracing easier. */
-static u32 tpm_read(int locality, u32 reg)
+static inline void tpm_write_status(u8 sts, int locality)
{
- u32 value;
- /*
- * Data FIFO register must be read and written in byte access mode,
- * otherwise the FIFO values are returned 4 bytes at a time.
- */
- if (is_byte_reg(reg))
- value = readb(TIS_REG(locality, reg));
- else
- value = readl(TIS_REG(locality, reg));
+ TPM_DEBUG_IO_WRITE(TIS_REG_STS, sts);
+ writeb(sts, TIS_REG(locality, TIS_REG_STS));
+}
+
+static inline u8 tpm_read_data(int locality)
+{
+ u8 value = readb(TIS_REG(locality, TIS_REG_DATA_FIFO));
+ TPM_DEBUG_IO_READ(TIS_REG_DATA_FIFO, value);
+ return value;
+}
+
+static inline void tpm_write_data(u8 data, int locality)
+{
+ TPM_DEBUG_IO_WRITE(TIS_REG_STS, data);
+ writeb(data, TIS_REG(locality, TIS_REG_DATA_FIFO));
+}
- TPM_DEBUG("Read reg 0x%x returns 0x%x\n", reg, value);
+static inline u16 tpm_read_burst_count(int locality)
+{
+ u16 count;
+ count = readb(TIS_REG(locality, TIS_REG_BURST_COUNT));
+ count |= readb(TIS_REG(locality, TIS_REG_BURST_COUNT + 1)) << 8;
+ TPM_DEBUG_IO_READ(TIS_REG_BURST_COUNT, count);
+ return count;
+}
+
+static inline u8 tpm_read_access(int locality)
+{
+ u8 value = readb(TIS_REG(locality, TIS_REG_ACCESS));
+ TPM_DEBUG_IO_READ(TIS_REG_ACCESS, value);
return value;
}
-static void tpm_write(u32 value, int locality, u32 reg)
+static inline void tpm_write_access(u8 data, int locality)
+{
+ TPM_DEBUG_IO_WRITE(TIS_REG_ACCESS, data);
+ writeb(data, TIS_REG(locality, TIS_REG_ACCESS));
+}
+
+static inline u32 tpm_read_did_vid(int locality)
+{
+ u32 value = readl(TIS_REG(locality, TIS_REG_DID_VID));
+ TPM_DEBUG_IO_READ(TIS_REG_DID_VID, value);
+ return value;
+}
+
+/*
+ * tis_wait_sts()
+ *
+ * Wait for at least a second for a status to change its state to match the
+ * expected state. Normally the transition happens within microseconds.
+ *
+ * @locality - locality
+ * @mask - bitmask for the bitfield(s) to watch
+ * @expected - value the field(s) are supposed to be set to
+ *
+ * Returns 0 on success or TPM_TIMEOUT_ERR on timeout.
+ */
+static int tis_wait_sts(int locality, u8 mask, u8 expected)
+{
+ u32 time_us = MAX_DELAY_US;
+ while (time_us > 0) {
+ u8 value = tpm_read_status(locality);
+ if ((value & mask) == expected)
+ return 0;
+ udelay(1); /* 1 us */
+ time_us--;
+ }
+ return TPM_TIMEOUT_ERR;
+}
+
+static inline int tis_wait_ready(int locality)
+{
+ return tis_wait_sts(locality, TIS_STS_COMMAND_READY,
+ TIS_STS_COMMAND_READY);
+}
+
+static inline int tis_wait_valid(int locality)
+{
+ return tis_wait_sts(locality, TIS_STS_VALID, TIS_STS_VALID);
+}
+
+static inline int tis_wait_valid_data(int locality)
+{
+ const u8 has_data = TIS_STS_DATA_AVAILABLE | TIS_STS_VALID;
+ return tis_wait_sts(locality, has_data, has_data);
+}
+
+static inline int tis_has_valid_data(int locality)
{
- TPM_DEBUG("Write reg 0x%x with 0x%x\n", reg, value);
+ const u8 has_data = TIS_STS_DATA_AVAILABLE | TIS_STS_VALID;
+ return (tpm_read_status(locality) & has_data) == has_data;
+}
- if (is_byte_reg(reg))
- writeb(value & 0xff, TIS_REG(locality, reg));
- else
- writel(value, TIS_REG(locality, reg));
+static inline int tis_expect_data(int locality)
+{
+ return !!(tpm_read_status(locality) & TIS_STS_EXPECT);
}
/*
- * tis_wait_reg()
+ * tis_wait_access()
*
- * Wait for at least a second for a register to change its state to match the
+ * Wait for at least a second for a access to change its state to match the
* expected state. Normally the transition happens within microseconds.
*
- * @reg - the TPM register offset
* @locality - locality
* @mask - bitmask for the bitfield(s) to watch
* @expected - value the field(s) are supposed to be set to
*
- * Returns the register contents in case the expected value was found in the
- * appropriate register bits, or TPM_TIMEOUT_ERR on timeout.
+ * Returns 0 on success or TPM_TIMEOUT_ERR on timeout.
*/
-static u32 tis_wait_reg(u8 reg, u8 locality, u8 mask, u8 expected)
+static int tis_wait_access(int locality, u8 mask, u8 expected)
{
u32 time_us = MAX_DELAY_US;
while (time_us > 0) {
- u32 value = tpm_read(locality, reg);
+ u8 value = tpm_read_access(locality);
if ((value & mask) == expected)
- return value;
+ return 0;
udelay(1); /* 1 us */
time_us--;
}
return TPM_TIMEOUT_ERR;
}
+static inline int tis_wait_dropped_access(int locality)
+{
+ return tis_wait_access(locality, TIS_ACCESS_ACTIVE_LOCALITY, 0);
+}
+
+static inline int tis_wait_received_access(int locality)
+{
+ return tis_wait_access(locality, TIS_ACCESS_ACTIVE_LOCALITY,
+ TIS_ACCESS_ACTIVE_LOCALITY);
+}
+
+static inline int tis_has_access(int locality)
+{
+ return !!(tpm_read_access(locality) & TIS_ACCESS_ACTIVE_LOCALITY);
+}
+
+static inline void tis_request_access(int locality)
+{
+ tpm_write_access(TIS_ACCESS_REQUEST_USE, locality);
+}
+
+static inline void tis_drop_access(int locality)
+{
+ tpm_write_access(TIS_ACCESS_ACTIVE_LOCALITY, locality);
+}
+
/*
* PC Client Specific TPM Interface Specification section 11.2.12:
*
@@ -244,23 +336,19 @@ static int tis_command_ready(u8 locality)
u32 status;
/* 1st attempt to set command ready */
- tpm_write(TIS_STS_COMMAND_READY, locality, TIS_REG_STS);
+ tpm_write_status(TIS_STS_COMMAND_READY, locality);
/* Wait for response */
- status = tpm_read(locality, TIS_REG_STS);
+ status = tpm_read_status(locality);
/* Check if command ready is set yet */
if (status & TIS_STS_COMMAND_READY)
return 0;
/* 2nd attempt to set command ready */
- tpm_write(TIS_STS_COMMAND_READY, locality, TIS_REG_STS);
-
- /* Wait for command ready to get set */
- status = tis_wait_reg(TIS_REG_STS, locality,
- TIS_STS_COMMAND_READY, TIS_STS_COMMAND_READY);
+ tpm_write_status(TIS_STS_COMMAND_READY, locality);
- return (status == TPM_TIMEOUT_ERR) ? TPM_TIMEOUT_ERR : 0;
+ return tis_wait_ready(locality);
}
/*
@@ -281,7 +369,7 @@ static u32 tis_probe(void)
if (car_get_var(vendor_dev_id))
return 0; /* Already probed. */
- didvid = tpm_read(0, TIS_REG_DID_VID);
+ didvid = tpm_read_did_vid(0);
if (!didvid || (didvid == 0xffffffff)) {
printf("%s: No TPM device found\n", __FUNCTION__);
return TPM_DRIVER_ERR;
@@ -331,16 +419,13 @@ static u32 tis_senddata(const u8 * const data, u32 len)
u16 burst = 0;
u32 max_cycles = 0;
u8 locality = 0;
- u32 value;
- value = tis_wait_reg(TIS_REG_STS, locality, TIS_STS_COMMAND_READY,
- TIS_STS_COMMAND_READY);
- if (value == TPM_TIMEOUT_ERR) {
+ if (tis_wait_ready(locality)) {
printf("%s:%d - failed to get 'command_ready' status\n",
__FILE__, __LINE__);
return TPM_DRIVER_ERR;
}
- burst = BURST_COUNT(value);
+ burst = tpm_read_burst_count(locality);
while (1) {
unsigned count;
@@ -353,7 +438,7 @@ static u32 tis_senddata(const u8 * const data, u32 len)
return TPM_DRIVER_ERR;
}
udelay(1);
- burst = BURST_COUNT(tpm_read(locality, TIS_REG_STS));
+ burst = tpm_read_burst_count(locality);
}
max_cycles = 0;
@@ -369,18 +454,15 @@ static u32 tis_senddata(const u8 * const data, u32 len)
*/
count = min(burst, len - offset - 1);
while (count--)
- tpm_write(data[offset++], locality, TIS_REG_DATA_FIFO);
+ tpm_write_data(data[offset++], locality);
- value = tis_wait_reg(TIS_REG_STS, locality,
- TIS_STS_VALID, TIS_STS_VALID);
-
- if ((value == TPM_TIMEOUT_ERR) || !(value & TIS_STS_EXPECT)) {
+ if (tis_wait_valid(locality) || !tis_expect_data(locality)) {
printf("%s:%d TPM command feed overflow\n",
__FILE__, __LINE__);
return TPM_DRIVER_ERR;
}
- burst = BURST_COUNT(value);
+ burst = tpm_read_burst_count(locality);
if ((offset == (len - 1)) && burst)
/*
* We need to be able to send the last byte to the
@@ -391,22 +473,20 @@ static u32 tis_senddata(const u8 * const data, u32 len)
}
/* Send the last byte. */
- tpm_write(data[offset++], locality, TIS_REG_DATA_FIFO);
+ tpm_write_data(data[offset++], locality);
/*
* Verify that TPM does not expect any more data as part of this
* command.
*/
- value = tis_wait_reg(TIS_REG_STS, locality,
- TIS_STS_VALID, TIS_STS_VALID);
- if ((value == TPM_TIMEOUT_ERR) || (value & TIS_STS_EXPECT)) {
+ if (tis_wait_valid(locality) || tis_expect_data(locality)) {
printf("%s:%d unexpected TPM status 0x%x\n",
- __FILE__, __LINE__, value);
+ __FILE__, __LINE__, tpm_read_status(locality));
return TPM_DRIVER_ERR;
}
/* OK, sitting pretty, let's start the command execution. */
- tpm_write(TIS_STS_TPM_GO, locality, TIS_REG_STS);
+ tpm_write_status(TIS_STS_TPM_GO, locality);
return 0;
}
@@ -426,37 +506,31 @@ static u32 tis_senddata(const u8 * const data, u32 len)
static u32 tis_readresponse(u8 *buffer, size_t *len)
{
u16 burst_count;
- u32 status;
u32 offset = 0;
u8 locality = 0;
- const u32 has_data = TIS_STS_DATA_AVAILABLE | TIS_STS_VALID;
u32 expected_count = *len;
int max_cycles = 0;
/* Wait for the TPM to process the command */
- status = tis_wait_reg(TIS_REG_STS, locality, has_data, has_data);
- if (status == TPM_TIMEOUT_ERR) {
- printf("%s:%d failed processing command\n",
- __FILE__, __LINE__);
+ if (tis_wait_valid_data(locality)) {
+ printf("%s:%d failed processing command\n", __FILE__, __LINE__);
return TPM_DRIVER_ERR;
}
do {
- while ((burst_count = BURST_COUNT(status)) == 0) {
+ while ((burst_count = tpm_read_burst_count(locality)) == 0) {
if (max_cycles++ == MAX_DELAY_US) {
printf("%s:%d TPM stuck on read\n",
__FILE__, __LINE__);
return TPM_DRIVER_ERR;
}
udelay(1);
- status = tpm_read(locality, TIS_REG_STS);
}
max_cycles = 0;
while (burst_count-- && (offset < expected_count)) {
- buffer[offset++] = (u8) tpm_read(locality,
- TIS_REG_DATA_FIFO);
+ buffer[offset++] = tpm_read_data(locality);
if (offset == 6) {
/*
* We got the first six bytes of the reply,
@@ -482,9 +556,7 @@ static u32 tis_readresponse(u8 *buffer, size_t *len)
}
/* Wait for the next portion */
- status = tis_wait_reg(TIS_REG_STS, locality,
- TIS_STS_VALID, TIS_STS_VALID);
- if (status == TPM_TIMEOUT_ERR) {
+ if (tis_wait_valid(locality)) {
printf("%s:%d failed to read response\n",
__FILE__, __LINE__);
return TPM_DRIVER_ERR;
@@ -493,15 +565,13 @@ static u32 tis_readresponse(u8 *buffer, size_t *len)
if (offset == expected_count)
break; /* We got all we need */
- } while ((status & has_data) == has_data);
+ } while (tis_has_valid_data(locality));
- /*
- * Make sure we indeed read all there was. The TIS_STS_VALID bit is
- * known to be set.
- */
- if (status & TIS_STS_DATA_AVAILABLE) {
- printf("%s:%d wrong receive status %x\n",
- __FILE__, __LINE__, status);
+ /* * Make sure we indeed read all there was. */
+ if (tis_has_valid_data(locality)) {
+ printf("%s:%d wrong receive status: %x %d bytes left\n",
+ __FILE__, __LINE__, tpm_read_status(locality),
+ tpm_read_burst_count(locality));
return TPM_DRIVER_ERR;
}
@@ -542,12 +612,10 @@ int tis_open(void)
return TPM_DRIVER_ERR;
/* now request access to locality */
- tpm_write(TIS_ACCESS_REQUEST_USE, locality, TIS_REG_ACCESS);
+ tis_request_access(locality);
/* did we get a lock? */
- if (tis_wait_reg(TIS_REG_ACCESS, locality,
- TIS_ACCESS_ACTIVE_LOCALITY,
- TIS_ACCESS_ACTIVE_LOCALITY) == TPM_TIMEOUT_ERR) {
+ if (tis_wait_received_access(locality)) {
printf("%s:%d - failed to lock locality %d\n",
__FILE__, __LINE__, locality);
return TPM_DRIVER_ERR;
@@ -572,13 +640,9 @@ int tis_open(void)
int tis_close(void)
{
u8 locality = 0;
- if (tpm_read(locality, TIS_REG_ACCESS) &
- TIS_ACCESS_ACTIVE_LOCALITY) {
- tpm_write(TIS_ACCESS_ACTIVE_LOCALITY, locality, TIS_REG_ACCESS);
-
- if (tis_wait_reg(TIS_REG_ACCESS, locality,
- TIS_ACCESS_ACTIVE_LOCALITY, 0) ==
- TPM_TIMEOUT_ERR) {
+ if (tis_has_access(locality)) {
+ tis_drop_access(locality);
+ if (tis_wait_dropped_access(locality)) {
printf("%s:%d - failed to release locality %d\n",
__FILE__, __LINE__, locality);
return TPM_DRIVER_ERR;