Support for the Kontron 986LCD-M mainboard series.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3704 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

16 files changed, 2297 insertions, 0 deletions

diff --git a/src/mainboard/kontron/986lcd-m/Config.lb b/src/mainboard/kontron/986lcd-m/Config.lb
new file mode 100644
index 0000000000..4ba6eac758
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/Config.lb
@@ -0,0 +1,284 @@
+##
+## This file is part of the coreboot project.
+## 
+## Copyright (C) 2007-2008 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; version 2 of
+## the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+## MA 02110-1301 USA
+##
+
+##
+## This mainboard requires DCACHE_AS_RAM enabled. It won't work without.
+## 
+
+##
+## Only use the option table in a normal image
+##
+default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+
+##
+## Compute the location and size of where this firmware image
+## (coreboot plus bootloader) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+        default ROM_SECTION_SIZE   = FALLBACK_SIZE
+        default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+        default ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE )
+        default ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute the start location and size size of
+## The coreboot bootloader.
+##
+default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+
+##
+## Compute where this copy of coreboot will start in the boot rom
+##
+default _ROMBASE      = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up coreboot,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=(64*1024)
+default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+##
+## Set all of the defaults for an x86 architecture
+##
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+driver rtl8168.o
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_PIRQ_TABLE object irq_tables.o end
+
+if HAVE_ACPI_TABLES
+	object fadt.o
+	object acpi_tables.o
+	makerule dsdt.c
+		depends "$(MAINBOARD)/dsdt.dsl"
+		action  "iasl -p $(PWD)/dsdt -tc $(MAINBOARD)/dsdt.dsl"
+		action  "mv $(PWD)/dsdt.hex dsdt.c"
+	end
+	object ./dsdt.o
+end
+
+object reset.o
+
+if CONFIG_USE_INIT
+
+makerule ./auto.o
+	depends "$(MAINBOARD)/auto.c option_table.h"
+	action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o"
+end
+
+else
+
+makerule ./auto.inc
+	depends "$(MAINBOARD)/auto.c option_table.h"
+	action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I.  $(CPPFLAGS) $(MAINBOARD)/auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+	action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+	action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+end
+
+end
+
+##
+## Build our 16 bit and 32 bit coreboot entry code
+##
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+if CONFIG_USE_INIT
+	ldscript /cpu/x86/32bit/entry32.lds
+	ldscript /cpu/x86/car/cache_as_ram.lds
+end
+
+##
+## Build our reset vector (This is where coreboot is entered)
+##
+if USE_FALLBACK_IMAGE 
+        mainboardinit cpu/x86/16bit/reset16.inc
+        ldscript /cpu/x86/16bit/reset16.lds
+else
+        mainboardinit cpu/x86/32bit/reset32.inc
+        ldscript /cpu/x86/32bit/reset32.lds
+end
+
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+##
+## Setup Cache-As-Ram
+##
+mainboardinit cpu/intel/model_6ex/cache_as_ram.inc
+
+###
+### This is the early phase of coreboot startup 
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if USE_FALLBACK_IMAGE
+	ldscript /arch/i386/lib/failover.lds
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+if CONFIG_USE_INIT
+initobject auto.o
+else
+mainboardinit ./auto.inc
+end
+
+##
+## Include the secondary Configuration files 
+##
+dir /pc80
+config chip.h
+
+chip northbridge/intel/i945
+
+        device apic_cluster 0 on
+                chip cpu/intel/socket_mFCPGA478
+                        device apic 0 on end
+                end
+        end
+
+        device pci_domain 0 on 
+                device pci 00.0 on end # host bridge
+		device pci 01.0 off end # i945 PCIe root port
+		chip drivers/pci/onboard
+			device pci 02.0 on end # vga controller
+			register "rom_address" = "0xfff00000"
+		end
+		device pci 02.1 on end # display controller
+
+                chip southbridge/intel/i82801gx
+                        register "ide_legacy_combined" = "0x1"
+                        register "ide_enable_primary" = "0x1"
+                        register "ide_enable_secondary" = "0x1"
+                        register "sata_ahci" = "0x0"
+
+                	device pci 1b.0 on end # High Definition Audio
+                	device pci 1c.0 on end # PCIe
+                	device pci 1c.1 on end # PCIe
+                	device pci 1c.2 on end # PCIe
+			#device pci 1c.3 off end # PCIe port 4
+			#device pci 1c.4 off end # PCIe port 5
+			#device pci 1c.5 off end # PCIe port 6
+                	device pci 1d.0 on end # USB UHCI
+                	device pci 1d.1 on end # USB UHCI
+                	device pci 1d.2 on end # USB UHCI
+                	device pci 1d.3 on end # USB UHCI
+                	device pci 1d.7 on end # USB2 EHCI
+                	device pci 1e.0 on end # PCI bridge
+			#device pci 1e.2 off end # AC'97 Audio 
+			#device pci 1e.3 off end # AC'97 Modem
+                        device pci 1f.0 on # LPC bridge
+                                chip superio/winbond/w83627thg
+					device pnp 2e.0 off		# Floppy
+					end
+					device pnp 2e.1 off		# Parport
+					end
+                                        device pnp 2e.2 on
+                                                 io 0x60 = 0x3f8
+                                                irq 0x70 = 4
+                                        end
+                                        device pnp 2e.3 on
+                                                 io 0x60 = 0x2f8
+                                                irq 0x70 = 3
+						irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq
+                                        end
+					device pnp 2e.5 on		# Keyboard+Mouse
+						 io 0x60 = 0x60
+						 io 0x62 = 0x64
+						irq 0x70 = 1
+						irq 0x72 = 12
+						irq 0xf0 = 0x82		# HW accel A20.
+					end
+					device pnp 2e.7 on		# GPIO1, GAME, MIDI
+						 io 0x62 = 0x330
+						irq 0x70 = 9
+					end
+					device pnp 2e.8 on		# GPIO2
+						# all default
+					end
+					device pnp 2e.9 on		# GPIO3/4
+						irq 0x30 = 0x03		# does this work?
+						irq 0xf0 = 0xfb		# set inputs/outputs
+						irq 0xf1 = 0x66
+					end
+					device pnp 2e.a off		# ACPI
+					end
+					device pnp 2e.b on		# HWM
+						 io 0x60 = 0xa00
+						irq 0x70 = 0
+					end
+
+                                end
+                                chip superio/winbond/w83627thg
+                                        device pnp 4e.0 off		# Floppy
+					end
+					device pnp 4e.1 off		# Parport
+					end
+                                        device pnp 4e.2 on		# COM3
+                                                 io 0x60 = 0x3e8
+                                                irq 0x70 = 11
+                                        end
+                                        device pnp 4e.3 on		# COM4
+                                                 io 0x60 = 0x2e8
+                                                irq 0x70 = 10
+                                        end
+					device pnp 4e.5 off		# Keyboard
+					end
+					device pnp 4e.7 off		# GPIO1, GAME, MIDI
+					end
+					device pnp 4e.8 off		# GPIO2
+					end
+					device pnp 4e.9 off		# GPIO3/4
+					end
+					device pnp 4e.a off		# ACPI
+					end
+					device pnp 4e.b off		# HWM
+					end
+                                end
+
+                        end
+			#device pci 1f.1 off end # IDE
+                        device pci 1f.2 on end  # SATA
+                        device pci 1f.3 on end  # SMBus
+			#device pci 1f.4 off end # Realtek ID Codec
+                end
+        end
+end
diff --git a/src/mainboard/kontron/986lcd-m/Options.lb b/src/mainboard/kontron/986lcd-m/Options.lb
new file mode 100644
index 0000000000..926e69820b
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/Options.lb
@@ -0,0 +1,311 @@
+##
+## This file is part of the coreboot project.
+## 
+## Copyright (C) 2007-2008 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; version 2 of
+## the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+## MA 02110-1301 USA
+##
+
+# Tables
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses IRQ_SLOT_COUNT
+uses HAVE_OPTION_TABLE
+uses USE_OPTION_TABLE
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
+uses HAVE_ACPI_TABLES
+# SMP
+uses CONFIG_SMP
+uses CONFIG_LOGICAL_CPUS
+uses CONFIG_AP_IN_SIPI_WAIT
+uses CONFIG_MAX_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
+uses CONFIG_IOAPIC
+# Image Size
+uses USE_FALLBACK_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses FALLBACK_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+# Payload
+uses CONFIG_ROM_PAYLOAD
+uses CONFIG_ROM_PAYLOAD_START
+uses CONFIG_COMPRESSED_PAYLOAD_LZMA
+uses CONFIG_PRECOMPRESSED_PAYLOAD
+uses PAYLOAD_SIZE
+# Build Internals
+uses _RAMBASE
+uses _ROMBASE
+uses STACK_SIZE
+uses HEAP_SIZE
+uses CONFIG_CHIP_NAME
+uses USE_DCACHE_RAM
+uses DCACHE_RAM_BASE
+uses DCACHE_RAM_SIZE
+uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
+uses XIP_ROM_BASE
+uses XIP_ROM_SIZE
+uses HAVE_HARD_RESET
+uses HAVE_SMI_HANDLER
+uses CONFIG_PCIE_CONFIGSPACE_HOLE
+#
+uses MAINBOARD
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+# Timers
+uses CONFIG_UDELAY_TSC
+uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
+# Console
+uses CONFIG_CONSOLE_SERIAL8250
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_PCI_ROM_RUN
+# Toolchain
+uses CC
+uses HOSTCC
+uses CROSS_COMPILE
+uses OBJCOPY
+# Tweaks
+uses CONFIG_GDB_STUB
+uses MAX_REBOOT_CNT
+uses USE_WATCHDOG_ON_BOOT
+uses COREBOOT_EXTRA_VERSION
+uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+
+###
+### Build options
+###
+
+##
+##
+default MAX_REBOOT_CNT=3
+
+##
+## Use the watchdog to break out of a lockup condition
+##
+default USE_WATCHDOG_ON_BOOT=0
+
+##
+## ROM_SIZE is the size of boot ROM that this board will use.
+##
+default ROM_SIZE=1024*1024
+
+
+##
+## Build code for the fallback boot
+##
+default HAVE_FALLBACK_BOOT=1
+
+##
+## Delay timer options
+## Use timer2
+## 
+default CONFIG_UDELAY_TSC=1
+default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
+
+##
+## Build code to reset the motherboard from coreboot
+##
+default HAVE_HARD_RESET=1
+
+##
+## Build SMI handler
+##
+default HAVE_SMI_HANDLER=1
+
+##
+## Leave a hole for mmapped PCIe config space
+##
+
+default CONFIG_PCIE_CONFIGSPACE_HOLE=1
+
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=1
+default IRQ_SLOT_COUNT=18
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+default HAVE_MP_TABLE=1
+
+##
+## Build code to provide ACPI support
+##
+default HAVE_ACPI_TABLES=1
+
+##
+## Build code to export a CMOS option table
+##
+default HAVE_OPTION_TABLE=1
+
+##
+## Move the default coreboot cmos range off of AMD RTC registers
+##
+default LB_CKS_RANGE_START=49
+default LB_CKS_RANGE_END=122
+default LB_CKS_LOC=123
+
+#VGA Console
+default CONFIG_CONSOLE_VGA=1
+default CONFIG_PCI_ROM_RUN=1
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+##
+default CONFIG_SMP=1
+default CONFIG_MAX_CPUS=4
+default CONFIG_MAX_PHYSICAL_CPUS=2
+default CONFIG_LOGICAL_CPUS=1
+default CONFIG_AP_IN_SIPI_WAIT=1
+
+##
+## enable CACHE_AS_RAM specifics
+##
+default USE_DCACHE_RAM=1
+default DCACHE_RAM_SIZE=0x8000
+default DCACHE_RAM_BASE=( 0xfff00000 - DCACHE_RAM_SIZE - 1024*1024)
+default CONFIG_USE_PRINTK_IN_CAR=1
+
+##
+## Build code to setup a generic IOAPIC
+##
+default CONFIG_IOAPIC=1
+
+##
+## Clean up the motherboard id strings
+##
+default MAINBOARD_PART_NUMBER="986LCD-M"
+default MAINBOARD_VENDOR=     "KONTRON"
+
+###
+### coreboot layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
+default ROM_IMAGE_SIZE = 65536
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE=0x2000
+
+##
+## Use a small 32K heap
+##
+default HEAP_SIZE=0x8000
+
+
+###
+### Compute the location and size of where this firmware image
+### (coreboot plus bootloader) will live in the boot rom chip.
+###
+default FALLBACK_SIZE=131072
+
+##
+## coreboot C code runs at this location in RAM
+##
+default _RAMBASE=0x00004000
+
+##
+## Load the payload from the ROM
+##
+default CONFIG_ROM_PAYLOAD=1
+
+###
+### Defaults of options that you may want to override in the target config file
+### 
+
+##
+## The default compiler
+##
+default CC="$(CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## Disable the gdb stub by default
+##
+default CONFIG_GDB_STUB=0
+
+##
+## The Serial Console
+##
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default TTYS0_BAUD=115200
+#default TTYS0_BAUD=57600
+#default TTYS0_BAUD=38400
+#default TTYS0_BAUD=19200
+#default TTYS0_BAUD=9600
+#default TTYS0_BAUD=4800
+#default TTYS0_BAUD=2400
+#default TTYS0_BAUD=1200
+
+# Select the serial console base port
+default TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default TTYS0_LCS=0x3
+
+##
+### Select the coreboot loglevel
+##
+## EMERG      1   system is unusable               
+## ALERT      2   action must be taken immediately 
+## CRIT       3   critical conditions              
+## ERR        4   error conditions                 
+## WARNING    5   warning conditions               
+## NOTICE     6   normal but significant condition 
+## INFO       7   informational                    
+## DEBUG      8   debug-level messages             
+## SPEW       9   Way too many details             
+
+## Request this level of debugging output
+default  DEFAULT_CONSOLE_LOGLEVEL=5
+## At a maximum only compile in this level of debugging
+default  MAXIMUM_CONSOLE_LOGLEVEL=9
+
+##
+## Select power on after power fail setting
+default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+
+##
+## chip name
+##
+default  CONFIG_CHIP_NAME=1
+
+
+### End Options.lb
+end
diff --git a/src/mainboard/kontron/986lcd-m/acpi_tables.c b/src/mainboard/kontron/986lcd-m/acpi_tables.c
new file mode 100644
index 0000000000..2e1b0b4346
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/acpi_tables.c
@@ -0,0 +1,295 @@
+/*
+ * This file is part of the coreboot project.
+ * 
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <string.h>
+#include <console/console.h>
+#include <arch/acpi.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include "dmi.h"
+
+extern unsigned char AmlCode[];
+
+typedef struct acpi_oemb {
+	acpi_header_t header;
+	u8  ss;
+	u16 iost;
+	u32 topm;
+	u32 roms;
+	u32 mg1b;
+	u32 mg1l;
+	u32 mg2b;
+	u32 mg2l;
+	u8  rsvd;
+	u8  dmax;
+	u32 hpta;
+	u32 cpb0;
+	u32 cpb1;
+	u32 cpb2;
+	u32 cpb3;
+	u8  assb;
+	u8  aotb;
+	u32 aaxb;
+	u8  smif;
+	u8  dtse;
+	u8  dts1;
+	u8  dts2;
+	u8  mpen;
+} __attribute__((packed)) acpi_oemb_t;
+
+void acpi_create_oemb(acpi_oemb_t *oemb)
+{
+	acpi_header_t *header = &(oemb->header);
+	unsigned long tolud;
+
+	memset (oemb, 0, sizeof(oemb));
+
+	/* fill out header fields */
+	memcpy(header->signature, "OEMB", 4);
+	memcpy(header->oem_id, OEM_ID, 6);
+	memcpy(header->oem_table_id, "COREBOOT", 8);
+	memcpy(header->asl_compiler_id, ASLC, 4);
+
+	header->length = sizeof(acpi_oemb_t);
+	header->revision = 1;
+
+	oemb->ss   =   0x09; // ss1 + ss 4
+	oemb->iost = 0x0403; // ??
+
+        tolud = pci_read_config32(dev_find_slot(0, PCI_DEVFN(2, 0)), 0x5c);
+	oemb->topm = tolud;
+
+	oemb->roms = 0xfff00000; // 1M hardcoded
+
+	oemb->mg1b = 0x000d0000;
+	oemb->mg1l = 0x00010000;
+
+	oemb->mg2b = tolud;
+	oemb->mg2l = 0-tolud;
+
+	oemb->dmax = 0x87;
+	oemb->hpta = 0x000e36c0;
+
+	header->checksum =
+	    acpi_checksum((void *) oemb, sizeof(acpi_oemb_t));
+
+};
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+#if 0
+	device_t dev;
+	u64 mmcfg;
+
+	dev = dev_find_device(0x1106, 0x324b, 0);	// 0:0x13.0
+	if (!dev)
+		return current;
+
+	// MMCFG not supported or not enabled.
+	if ((pci_read_config8(dev, 0x40) & 0xC0) != 0xC0)
+		return current;
+
+	mmcfg = ((u64) pci_read_config8(dev, 0x41)) << 28;
+	if (!mmcfg)
+		return current;
+
+	current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *) current, mmcfg, 0x0, 0x0, 0xff);
+#endif
+	return current;
+}
+
+void acpi_create_intel_hpet(acpi_hpet_t * hpet)
+{
+#define HPET_ADDR  0xfe800000ULL
+	acpi_header_t *header = &(hpet->header);
+	acpi_addr_t *addr = &(hpet->addr);
+
+	memset((void *) hpet, 0, sizeof(acpi_hpet_t));
+
+	/* fill out header fields */
+	memcpy(header->signature, HPET_NAME, 4);
+	memcpy(header->oem_id, OEM_ID, 6);
+	memcpy(header->oem_table_id, "COREBOOT", 8);
+	memcpy(header->asl_compiler_id, ASLC, 4);
+
+	header->length = sizeof(acpi_hpet_t);
+	header->revision = 1;
+
+	/* fill out HPET address */
+	// XXX factory bios just puts an address here -- who's right?
+	addr->space_id = 0;	/* Memory */
+	addr->bit_width = 64;
+	addr->bit_offset = 0;
+	addr->addrl = HPET_ADDR & 0xffffffff;
+	addr->addrh = HPET_ADDR >> 32;
+
+	hpet->id = 0x80861234;	/* VIA */
+	hpet->number = 0x00;
+	hpet->min_tick = 0x0090;
+
+	header->checksum =
+	    acpi_checksum((void *) hpet, sizeof(acpi_hpet_t));
+}
+
+
+
+#define IO_APIC_ADDR	0xfec00000UL
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+	/* Local Apic */
+	current += acpi_create_madt_lapic((acpi_madt_lapic_t *) current, 1, 0);
+	// This one is for the second core... Will it hurt?
+	current += acpi_create_madt_lapic((acpi_madt_lapic_t *) current, 2, 1);
+
+	/* IOAPIC */
+	current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, IO_APIC_ADDR, 0);
+
+	/* INT_SRC_OVR */
+	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) current, 0, 0, 2, 0);
+	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) current, 0, 9, 9, 0x000d);	// high/level
+
+	return current;
+}
+
+unsigned long acpi_fill_srat(unsigned long current)
+{
+	/* No NUMA, no SRAT */
+	return current;
+}
+
+
+#define ALIGN_CURRENT current = ((current + 0x0f) & -0x10)
+unsigned long write_acpi_tables(unsigned long start)
+{
+	unsigned long current;
+	int i;
+	acpi_rsdp_t *rsdp;
+	acpi_rsdt_t *rsdt;
+	acpi_hpet_t *hpet;
+	acpi_madt_t *madt;
+	acpi_mcfg_t *mcfg;
+	acpi_fadt_t *fadt;
+	acpi_facs_t *facs;
+	acpi_oemb_t *oemb;
+	acpi_header_t *dsdt;
+
+	/* Align ACPI tables to 16byte */
+	start = (start + 0x0f) & -0x10;
+	current = start;
+
+	printk_info("ACPI: Writing ACPI tables at %lx.\n", start);
+
+	/* We need at least an RSDP and an RSDT Table */
+	rsdp = (acpi_rsdp_t *) current;
+	current += sizeof(acpi_rsdp_t);
+	ALIGN_CURRENT;
+	rsdt = (acpi_rsdt_t *) current;
+	current += sizeof(acpi_rsdt_t);
+	ALIGN_CURRENT;
+
+	/* clear all table memory */
+	memset((void *) start, 0, current - start);
+
+	acpi_write_rsdp(rsdp, rsdt);
+	acpi_write_rsdt(rsdt);
+
+	/*
+	 * We explicitly add these tables later on:
+	 */
+#if 0
+	printk_debug("ACPI:    * HPET\n");
+
+	hpet = (acpi_hpet_t *) current;
+	current += sizeof(acpi_hpet_t);
+	ALIGN_CURRENT;
+	acpi_create_intel_hpet(hpet);
+	acpi_add_table(rsdt, hpet);
+#endif
+	/* If we want to use HPET Timers Linux wants an MADT */
+	printk_debug("ACPI:    * MADT\n");
+
+	madt = (acpi_madt_t *) current;
+	acpi_create_madt(madt);
+	current += madt->header.length;
+	ALIGN_CURRENT;
+	acpi_add_table(rsdt, madt);
+#if 0
+	printk_debug("ACPI:    * MCFG\n");
+	mcfg = (acpi_mcfg_t *) current;
+	acpi_create_mcfg(mcfg);
+	current += mcfg->header.length;
+	ALIGN_CURRENT;
+	acpi_add_table(rsdt, mcfg);
+#endif
+
+	printk_debug("ACPI:    * OEMB\n");
+	oemb=(acpi_oemb_t *)current;
+	current += sizeof(acpi_oemb_t);
+	ALIGN_CURRENT;
+	acpi_create_oemb(oemb);
+	acpi_add_table(rsdt, oemb);
+
+	printk_debug("ACPI:     * FACS\n");
+	facs = (acpi_facs_t *) current;
+	current += sizeof(acpi_facs_t);
+	ALIGN_CURRENT;
+	acpi_create_facs(facs);
+
+	dsdt = (acpi_header_t *) current;
+	current += ((acpi_header_t *) AmlCode)->length;
+	ALIGN_CURRENT;
+	memcpy((void *) dsdt, (void *) AmlCode,
+	       ((acpi_header_t *) AmlCode)->length);
+
+#if 1
+	for (i=0; i < dsdt->length; i++) {
+		if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBABE) {
+			printk_debug("ACPI: Patching up DSDT at offset 0x%04x -> 0x%08x\n", i, 0x24 + (u32)oemb);
+			*(u32*)(((u32)dsdt) + i) = 0x24 + (u32)oemb;
+			break;
+		}
+	}
+
+	/* We patched up the DSDT, so we need to recalculate the checksum */
+	dsdt->checksum = 0;
+	dsdt->checksum = acpi_checksum(dsdt, dsdt->length);
+#endif
+
+	printk_debug("ACPI:     * DSDT @ %08x Length %x\n", dsdt,
+		     dsdt->length);
+
+	printk_debug("ACPI:     * FADT\n");
+	fadt = (acpi_fadt_t *) current;
+	current += sizeof(acpi_fadt_t);
+	ALIGN_CURRENT;
+
+	acpi_create_fadt(fadt, facs, dsdt);
+	acpi_add_table(rsdt, fadt);
+	printk_debug("current = %x\n", current);
+
+	printk_debug("ACPI:     * DMI (Linux workaround)\n");
+	memcpy((void *)0xfff80, dmi_table, DMI_TABLE_SIZE);
+
+	printk_info("ACPI: done.\n");
+	return current;
+}
diff --git a/src/mainboard/kontron/986lcd-m/auto.c b/src/mainboard/kontron/986lcd-m/auto.c
new file mode 100644
index 0000000000..c708f1ae15
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/auto.c
@@ -0,0 +1,364 @@
+/*
+ * This file is part of the coreboot project.
+ * 
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+// __ROMCC__ means: use "unsigned" for device, not a struct.
+#define __ROMCC__ 
+
+#include <stdint.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <device/pci_def.h>
+#include <device/pnp_def.h>
+#include <cpu/x86/lapic.h>
+
+#include "superio/winbond/w83627thg/w83627thg.h"
+
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include <cpu/x86/bist.h>
+
+#include "ram/ramtest.c"
+#include "southbridge/intel/i82801gx/i82801gx_early_smbus.c"
+#include "reset.c"
+#include "superio/winbond/w83627thg/w83627thg_early_serial.c"
+
+#include "northbridge/intel/i945/udelay.c"
+
+#if CONFIG_USE_INIT == 0
+#include "lib/memcpy.c"
+#endif
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627THG_SP1)
+
+#include "northbridge/intel/i945/ich7.h"
+static void setup_ich7_gpios(void)
+{
+	/* TODO: This is highly board specific and should be moved */
+	printk_debug(" GPIOS...");
+	/* General Registers */
+	outl(0x1f1ff7c0, DEFAULT_GPIOBASE + 0x00);	/* GPIO_USE_SEL */
+	outl(0xe0e8efc3, DEFAULT_GPIOBASE + 0x04);	/* GP_IO_SEL */
+	outl(0xebffeeff, DEFAULT_GPIOBASE + 0x0c);	/* GP_LVL */
+	/* Output Control Registers */
+	outl(0x00000000, DEFAULT_GPIOBASE + 0x18);	/* GPO_BLINK */
+	/* Input Control Registers */
+	outl(0x00002180, DEFAULT_GPIOBASE + 0x2c);	/* GPI_INV */
+	outl(0x000000ff, DEFAULT_GPIOBASE + 0x30);	/* GPIO_USE_SEL2 */
+	outl(0x00000030, DEFAULT_GPIOBASE + 0x34);	/* GP_IO_SEL2 */
+	outl(0x00010035, DEFAULT_GPIOBASE + 0x38);	/* GP_LVL */
+}
+
+#include "northbridge/intel/i945/early_init.c"
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+	return smbus_read_byte(device, address);
+}
+
+/* Usually system firmware turns off system memory clock signals to 
+ * unused SO-DIMM slots to reduce EMI and power consumption.
+ * However, the Kontron 986LCD-M does not like unused clock signals to
+ * be disabled. If other similar mainboard occur, it would make sense
+ * to make this an entry in the sysinfo structure, and pre-initialize that
+ * structure in the mainboard's auto.c main() function. For now a
+ * #define will do.
+ */
+#define OVERRIDE_CLOCK_DISABLE 1
+#include "northbridge/intel/i945/raminit.h"
+#include "northbridge/intel/i945/raminit.c"
+#include "northbridge/intel/i945/reset_test.c"
+#include "northbridge/intel/i945/errata.c"
+#include "debug.c"
+
+static void ich7_enable_lpc(void)
+{
+	// Enable Serial IRQ
+	pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0);
+	// Set COM1/COM2 decode range
+	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010);
+	// Enable COM1/COM2/KBD/SuperIO1+2
+	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x340b);
+	// Enable HWM at 0xa00
+	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x84, 0x0a01);
+	// COM3 decode
+	pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x000403e9);
+	// COM4 decode
+	pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x8c, 0x000402e9);
+	// io 0x300 decode 
+	pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x90, 0x00000301);
+}
+
+
+/* This box has two superios, so enabling serial becomes slightly excessive.
+ * We disable a lot of stuff to make sure that there are no conflicts between
+ * the two. Also set up the GPIOs from the beginning. This is the "no schematic
+ * but safe anyways" method.
+ */
+static void early_superio_config_w83627thg(void)
+{
+	device_t dev;
+	
+	dev=PNP_DEV(0x2e, W83627THG_SP1);
+	pnp_enter_ext_func_mode(dev);
+
+	pnp_set_logical_device(dev);
+	pnp_set_enable(dev, 0);
+	pnp_set_iobase(dev, PNP_IDX_IO0, 0x3f8);
+	pnp_set_irq(dev, PNP_IDX_IRQ0, 4);
+	pnp_set_enable(dev, 1);
+
+	dev=PNP_DEV(0x2e, W83627THG_SP2);
+	pnp_set_logical_device(dev);
+	pnp_set_enable(dev, 0);
+	pnp_set_iobase(dev, PNP_IDX_IO0, 0x2f8);
+	pnp_set_irq(dev, PNP_IDX_IRQ0, 3);
+	// pnp_write_config(dev, 0xf1, 4); // IRMODE0
+	pnp_set_enable(dev, 1);
+
+	dev=PNP_DEV(0x2e, W83627THG_KBC);
+	pnp_set_logical_device(dev);
+	pnp_set_enable(dev, 0);
+	pnp_set_iobase(dev, PNP_IDX_IO0, 0x60);
+	pnp_set_iobase(dev, PNP_IDX_IO1, 0x64);
+	// pnp_write_config(dev, 0xf0, 0x82);
+	pnp_set_enable(dev, 1);
+
+	dev=PNP_DEV(0x2e, W83627THG_GAME_MIDI_GPIO1);
+	pnp_set_logical_device(dev);
+	pnp_set_enable(dev, 0);
+	pnp_write_config(dev, 0xf5, 0xff); // invert all GPIOs
+	pnp_set_enable(dev, 1);
+
+	dev=PNP_DEV(0x2e, W83627THG_GPIO2);
+	pnp_set_logical_device(dev);
+	pnp_set_enable(dev, 1); // Just enable it
+
+	dev=PNP_DEV(0x2e, W83627THG_GPIO3);
+	pnp_set_logical_device(dev);
+	pnp_set_enable(dev, 0);
+	pnp_write_config(dev, 0xf0, 0xfb); // GPIO bit 2 is output
+	pnp_write_config(dev, 0xf1, 0x00); // GPIO bit 2 is 0
+	pnp_write_config(dev, 0x30, 0x03); // Enable GPIO3+4. pnp_set_enable is not sufficient
+
+	dev=PNP_DEV(0x2e, W83627THG_FDC);
+	pnp_set_logical_device(dev);
+	pnp_set_enable(dev, 0);
+
+	dev=PNP_DEV(0x2e, W83627THG_PP);
+	pnp_set_logical_device(dev);
+	pnp_set_enable(dev, 0);
+
+	pnp_exit_ext_func_mode(dev);
+
+	dev=PNP_DEV(0x4e, W83627THG_SP1);
+	pnp_enter_ext_func_mode(dev);
+
+	pnp_set_logical_device(dev); // Set COM3 to sane non-conflicting values
+	pnp_set_enable(dev, 0);
+	pnp_set_iobase(dev, PNP_IDX_IO0, 0x3e8);
+	pnp_set_irq(dev, PNP_IDX_IRQ0, 11);
+	pnp_set_enable(dev, 1);
+
+	dev=PNP_DEV(0x4e, W83627THG_SP2); 
+	pnp_set_logical_device(dev); // Set COM4 to sane non-conflicting values
+	pnp_set_enable(dev, 0);
+	pnp_set_iobase(dev, PNP_IDX_IO0, 0x2e8);
+	pnp_set_irq(dev, PNP_IDX_IRQ0, 10);
+	pnp_set_enable(dev, 1);
+
+	dev=PNP_DEV(0x4e, W83627THG_FDC);
+	pnp_set_logical_device(dev);
+	pnp_set_enable(dev, 0);
+
+	dev=PNP_DEV(0x4e, W83627THG_PP);
+	pnp_set_logical_device(dev);
+	pnp_set_enable(dev, 0);
+
+	dev=PNP_DEV(0x4e, W83627THG_KBC);
+	pnp_set_logical_device(dev);
+	pnp_set_enable(dev, 0);
+	pnp_set_iobase(dev, PNP_IDX_IO0, 0x00);
+	pnp_set_iobase(dev, PNP_IDX_IO1, 0x00);
+
+	pnp_exit_ext_func_mode(dev);
+}
+
+static void rcba_config(void)
+{
+	/* Set up virtual channel 0 */
+	//RCBA32(0x0014) = 0x80000001;
+	//RCBA32(0x001c) = 0x03128010;
+
+	/* Device 1f interrupt pin register */
+	RCBA32(0x3100) = 0x00042210;
+	/* Device 1d interrupt pin register */
+	RCBA32(0x310c) = 0x00214321;
+
+	/* dev irq route register */
+	RCBA16(0x3140) = 0x0132;
+	RCBA16(0x3142) = 0x3241;
+	RCBA16(0x3144) = 0x0237;
+	RCBA16(0x3146) = 0x3210;
+	RCBA16(0x3148) = 0x3210;
+
+	/* Enable IOAPIC */
+	RCBA8(0x31ff) = 0x03;
+
+	/* Enable upper 128bytes of CMOS */
+	RCBA32(0x3400) = (1 << 2);
+
+	/* Disable unused devices */
+	RCBA32(0x3418) = 0x000e0063;
+
+	/* Enable PCIe Root Port Clock Gate */
+	// RCBA32(0x341c) = 0x00000001;
+}
+
+static void early_ich7_init(void)
+{
+	uint8_t reg8;
+	uint32_t reg32;
+
+	// program secondary mlt XXX byte?
+	pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20);
+
+	// reset rtc power status
+	reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4);
+	reg8 &= ~(1 << 2);
+	pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8);
+
+	// usb transient disconnect
+	reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad);
+	reg8 |= (3 << 0);
+	pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8);
+
+	reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc);
+	reg32 |= (1 << 29) | (1 << 17);
+	pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32);
+
+	reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc);
+	reg32 |= (1 << 31) | (1 << 27);
+	pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32);
+
+	RCBA32(0x0088) = 0x0011d000;
+	RCBA16(0x01fc) = 0x060f;
+	RCBA32(0x01f4) = 0x86000040;
+	RCBA32(0x0214) = 0x10030549;
+	RCBA32(0x0218) = 0x00020504;
+	RCBA8(0x0220) = 0xc5;
+	reg32 = RCBA32(0x3410);
+	reg32 |= (1 << 6);
+	RCBA32(0x3410) = reg32;
+	reg32 = RCBA32(0x3430);
+	reg32 &= ~(3 << 0);
+	reg32 |= (1 << 0);
+	RCBA32(0x3430) = reg32;
+	RCBA32(0x3418) |= (1 << 0);
+	RCBA16(0x0200) = 0x2008;
+	RCBA8(0x2027) = 0x0d;
+	RCBA16(0x3e08) |= (1 << 7);
+	RCBA16(0x3e48) |= (1 << 7);
+	RCBA32(0x3e0e) |= (1 << 7);
+	RCBA32(0x3e4e) |= (1 << 7);
+
+	// next step only on ich7m b0 and later:
+	reg32 = RCBA32(0x2034);
+	reg32 &= ~(0x0f << 16);
+	reg32 |= (5 << 16);
+	RCBA32(0x2034) = reg32;
+}
+
+#if USE_FALLBACK_IMAGE == 1
+#include "southbridge/intel/i82801gx/cmos_failover.c"
+#endif
+
+void real_main(unsigned long bist)
+{
+	int boot_mode = 0;
+
+	if (bist == 0) {
+		enable_lapic();
+	}
+
+	ich7_enable_lpc();
+	early_superio_config_w83627thg();
+
+	/* Set up the console */
+	uart_init();
+	console_init();
+
+	/* Halt if there was a built in self test failure */
+	report_bist_failure(bist);
+
+	if (MCHBAR16(SSKPD) == 0xCAFE) {
+		printk_debug("soft reset detected.\n");
+		boot_mode = 1;
+	}
+
+	/* Perform some early chipset initialization required
+	 * before RAM initialization can work
+	 */
+	i945_early_initialization();
+
+	/* Enable SPD ROMs and DDR-II DRAM */
+	enable_smbus();
+	
+#if DEFAULT_CONSOLE_LOGLEVEL > 8
+	dump_spd_registers();
+#endif
+
+	sdram_initialize(boot_mode);
+
+	/* Perform some initialization that must run before stage2 */
+	early_ich7_init();
+
+	/* This should probably go away. Until now it is required 
+	 * and mainboard specific 
+	 */
+	rcba_config();
+
+	/* Chipset Errata! */
+	fixup_i945_errata();
+
+	/* Initialize the internal PCIe links before we go into stage2 */
+	i945_late_initialization();
+
+#if DEFAULT_CONSOLE_LOGLEVEL > 8
+#if defined(DEBUG_RAM_SETUP)
+	sdram_dump_mchbar_registers();
+#endif
+
+	{
+		/* This will not work if TSEG is in place! */
+		u32 tom = pci_read_config32(PCI_DEV(0,2,0), 0x5c);
+
+		printk_debug("TOM: 0x%08x\n", tom);
+		ram_check(0x00000000, 0x000a0000);
+		ram_check(0x00100000, tom);
+	}
+#endif
+	MCHBAR16(SSKPD) = 0xCAFE;
+}
+
+#include "cpu/intel/model_6ex/cache_as_ram_disable.c"
diff --git a/src/mainboard/kontron/986lcd-m/chip.h b/src/mainboard/kontron/986lcd-m/chip.h
new file mode 100644
index 0000000000..abc9e8b0be
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/chip.h
@@ -0,0 +1,25 @@
+/*
+ * This file is part of the coreboot project.
+ * 
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+struct chip_operations mainboard_kontron_986lcd_m_ops;
+struct mainboard_kontron_986lcd_m_config {
+	int nothing;
+};
diff --git a/src/mainboard/kontron/986lcd-m/cmos.layout b/src/mainboard/kontron/986lcd-m/cmos.layout
new file mode 100644
index 0000000000..ba42513c9c
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/cmos.layout
@@ -0,0 +1,134 @@
+#
+# This file is part of the coreboot project.
+# 
+# Copyright (C) 2007-2008 coresystems GmbH
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of
+# the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+# -----------------------------------------------------------------
+entries
+
+#start-bit length  config config-ID    name
+#0            8       r       0        seconds
+#8            8       r       0        alarm_seconds
+#16           8       r       0        minutes
+#24           8       r       0        alarm_minutes
+#32           8       r       0        hours
+#40           8       r       0        alarm_hours
+#48           8       r       0        day_of_week
+#56           8       r       0        day_of_month
+#64           8       r       0        month
+#72           8       r       0        year
+# -----------------------------------------------------------------
+# Status Register A
+#80           4       r       0        rate_select
+#84           3       r       0        REF_Clock
+#87           1       r       0        UIP
+# -----------------------------------------------------------------
+# Status Register B
+#88           1       r       0        auto_switch_DST
+#89           1       r       0        24_hour_mode
+#90           1       r       0        binary_values_enable
+#91           1       r       0        square-wave_out_enable
+#92           1       r       0        update_finished_enable
+#93           1       r       0        alarm_interrupt_enable
+#94           1       r       0        periodic_interrupt_enable
+#95           1       r       0        disable_clock_updates
+# -----------------------------------------------------------------
+# Status Register C
+#96           4       r       0        status_c_rsvd
+#100          1       r       0        uf_flag
+#101          1       r       0        af_flag
+#102          1       r       0        pf_flag
+#103          1       r       0        irqf_flag
+# -----------------------------------------------------------------
+# Status Register D
+#104          7       r       0        status_d_rsvd
+#111          1       r       0        valid_cmos_ram
+# -----------------------------------------------------------------
+# Diagnostic Status Register
+#112          8       r       0        diag_rsvd1
+
+# -----------------------------------------------------------------
+0          120       r       0        reserved_memory
+#120        264       r       0        unused
+
+# -----------------------------------------------------------------
+# RTC_BOOT_BYTE (coreboot hardcoded)
+384          1       e       4        boot_option
+385          1       e       4        last_boot
+388          4       r       0        reboot_bits
+#390          2       r       0        unused?
+
+# -----------------------------------------------------------------
+# coreboot config options: console
+392          3       e       5        baud_rate
+395          4       e       6        debug_level
+#399          1       r       0        unused
+
+# coreboot config options: cpu
+400          1       e       2        hyper_threading
+#401          7       r       0        unused
+
+# coreboot config options: southbridge
+408          1       e       1        nmi
+409          1       e       1        power_on_after_fail
+#410          6       r       0        unused
+
+# coreboot config options: bootloader
+416        512       s       0        boot_devices
+#928         80       r       0        unused
+
+# coreboot config options: check sums
+984         16       h       0        check_sum
+#1000        24       r       0        amd_reserved
+
+# -----------------------------------------------------------------
+
+enumerations
+
+#ID value   text
+1     0     Disable
+1     1     Enable
+2     0     Enable
+2     1     Disable
+4     0     Fallback
+4     1     Normal
+5     0     115200
+5     1     57600
+5     2     38400
+5     3     19200
+5     4     9600
+5     5     4800
+5     6     2400
+5     7     1200
+6     1     Emergency
+6     2     Alert
+6     3     Critical
+6     4     Error
+6     5     Warning
+6     6     Notice
+6     7     Info
+6     8     Debug
+6     9     Spew
+
+# -----------------------------------------------------------------
+checksums
+
+checksum 392 983 984
+
+
diff --git a/src/mainboard/kontron/986lcd-m/debug.c b/src/mainboard/kontron/986lcd-m/debug.c
new file mode 100644
index 0000000000..ecd6b7e2d1
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/debug.c
@@ -0,0 +1,128 @@
+/*
+ * This file is part of the coreboot project.
+ * 
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#define SMBUS_MEM_DEVICE_START 0x50
+#define SMBUS_MEM_DEVICE_END 0x53
+#define SMBUS_MEM_DEVICE_INC 1
+
+static void print_pci_devices(void)
+{
+	device_t dev;
+	for(dev = PCI_DEV(0, 0, 0); 
+		dev <= PCI_DEV(0, 0x1f, 0x7); 
+		dev += PCI_DEV(0,0,1)) {
+		uint32_t id;
+		id = pci_read_config32(dev, PCI_VENDOR_ID);
+		if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0x0000)) {
+			continue;
+		}
+		printk_debug("PCI: %02x:%02x.%02x", (dev >> 20) & 0xff,
+			(dev >> 15) & 0x1f, (dev >> 12) & 7);
+		printk_debug(" [%04x:%04x]\r\n", id &0xffff, id >> 16);
+	}
+}
+
+static void dump_pci_device(unsigned dev)
+{
+	int i;
+
+	printk_debug("PCI: %02x:%02x.%02x\r\n", (dev >> 20) & 0xff, (dev >> 15) & 0x1f, (dev >> 12) & 7);
+
+	for(i = 0; i <= 255; i++) {
+		unsigned char val;
+		if ((i & 0x0f) == 0) {
+			printk_debug("%02x:", i);
+		}
+		val = pci_read_config8(dev, i);
+		printk_debug(" %02x", val);
+		if ((i & 0x0f) == 0x0f) {
+			printk_debug("\r\n");
+		}
+	}
+}
+
+static void dump_pci_devices(void)
+{
+	device_t dev;
+	for(dev = PCI_DEV(0, 0, 0); 
+		dev <= PCI_DEV(0, 0x1f, 0x7); 
+		dev += PCI_DEV(0,0,1)) {
+		uint32_t id;
+		id = pci_read_config32(dev, PCI_VENDOR_ID);
+		if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0xffff) ||
+			(((id >> 16) & 0xffff) == 0x0000)) {
+			continue;
+		}
+		dump_pci_device(dev);
+	}
+}
+
+void dump_spd_registers(void)
+{
+        unsigned device;
+        device = SMBUS_MEM_DEVICE_START;
+        while(device <= SMBUS_MEM_DEVICE_END) {
+                int status = 0;
+                int i;
+        	printk_debug("\r\ndimm %02x", device);
+		
+                for(i = 0; (i < 256) ; i++) {
+                        if ((i % 16) == 0) {
+				printk_debug("\r\n%02x: ", i);
+                        }
+			status = smbus_read_byte(device, i);
+                        if (status < 0) {
+			         printk_debug("bad device: %02x\r\n", -status);
+			         break; 
+			}
+			printk_debug("%02x ", status);
+		}
+		device += SMBUS_MEM_DEVICE_INC;
+		printk_debug("\r\n");
+	}
+}
+
+static void dump_mem(unsigned start, unsigned end)
+{
+        unsigned i;
+	print_debug("dump_mem:");
+        for(i=start;i<end;i++) {
+		if((i & 0xf)==0) {
+#if CONFIG_USE_INIT
+			printk_debug("\r\n%08x:", i);
+#else	
+			print_debug("\r\n");
+			print_debug_hex32(i);
+			print_debug(":");
+#endif
+		}
+#if CONFIG_USE_INIT	
+		printk_debug(" %02x", (unsigned char)*((unsigned char *)i));
+#else
+		print_debug(" ");
+             	print_debug_hex8((unsigned char)*((unsigned char *)i));
+#endif
+        }
+        print_debug("\r\n");
+ }
diff --git a/src/mainboard/kontron/986lcd-m/dmi.h b/src/mainboard/kontron/986lcd-m/dmi.h
new file mode 100644
index 0000000000..29f697e03c
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/dmi.h
@@ -0,0 +1,31 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#define DMI_TABLE_SIZE 0x55
+
+static u8 dmi_table[DMI_TABLE_SIZE] = {
+	0x5f, 0x53, 0x4d, 0x5f, 0x2d, 0x1f, 0x02, 0x03, 0x51, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x5f, 0x44, 0x4d, 0x49, 0x5f, 0xeb, 0xa8, 0x03, 0xa0, 0xff, 0x0f, 0x00, 0x01, 0x00, 0x23, 0x00,
+	0x00, 0x14, 0x00, 0x00, 0x01, 0x02, 0x00, 0xe0, 0x03, 0x07, 0x90, 0xde, 0xcb, 0x7f, 0x00, 0x00,
+	0x00, 0x00, 0x37, 0x01, 0x63, 0x6f, 0x72, 0x65, 0x73, 0x79, 0x73, 0x74, 0x65, 0x6d, 0x73, 0x20,
+	0x47, 0x6d, 0x62, 0x48, 0x00, 0x32, 0x2e, 0x30, 0x00, 0x30, 0x33, 0x2f, 0x31, 0x33, 0x2f, 0x32,
+	0x30, 0x30, 0x38, 0x00, 0x00
+};
diff --git a/src/mainboard/kontron/986lcd-m/dsdt.dsl b/src/mainboard/kontron/986lcd-m/dsdt.dsl
new file mode 100644
index 0000000000..95627fb45d
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/dsdt.dsl
@@ -0,0 +1,303 @@
+/*
+ * This file is part of the coreboot project.
+ * 
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+DefinitionBlock ("DSDT", "DSDT", 1, "986LCD", "COREBOOT", 0x0000001)
+{
+    Scope (\_PR)
+    {
+        Processor (CPU1, 0x01, 0x00000810, 0x06)
+        {
+            OperationRegion (STBL, SystemMemory, 0xFFFF0000, 0xFFFF)
+            Name (NCPU, 0x80)
+            Name (TYPE, 0x80000000)
+            Name (HNDL, 0x80000000)
+            Name (CFGD, 0x80000000)
+            Name (TBLD, 0x80)
+            Method (_PDC, 1, NotSerialized)
+            {
+            }
+        }
+    }
+
+    Scope (\_PR)
+    {
+        Processor (CPU2, 0x02, 0x00000000, 0x00)
+        {
+            OperationRegion (STBL, SystemMemory, 0xFFFF0000, 0xFFFF)
+            Name (NCPU, 0x80)
+            Name (TYPE, 0x80000000)
+            Name (HNDL, 0x80000000)
+            Name (CFGD, 0x80000000)
+            Name (TBLD, 0x80)
+            Method (_PDC, 1, NotSerialized)
+            {
+            }
+        }
+    }
+
+    Name (PICM, 0x00)
+    Method (_PIC, 1, NotSerialized)
+    {
+        Store (Arg0, PICM)
+    }
+
+    Scope (\_SB)
+    {
+        Name (PR00, Package (0x12)
+        {
+            Package (0x04) { 0x0001FFFF, 0x00, LNKA, 0x00 }, 
+            Package (0x04) { 0x0001FFFF, 0x01, LNKB, 0x00 }, 
+            Package (0x04) { 0x0001FFFF, 0x02, LNKC, 0x00 }, 
+            Package (0x04) { 0x0001FFFF, 0x03, LNKD, 0x00 }, 
+            Package (0x04) { 0x001FFFFF, 0x00, LNKC, 0x00 }, 
+            Package (0x04) { 0x001FFFFF, 0x01, LNKD, 0x00 }, 
+            Package (0x04) { 0x001DFFFF, 0x00, LNKH, 0x00 }, 
+            Package (0x04) { 0x001DFFFF, 0x01, LNKD, 0x00 }, 
+            Package (0x04) { 0x001DFFFF, 0x02, LNKC, 0x00 }, 
+            Package (0x04) { 0x001DFFFF, 0x03, LNKA, 0x00 }, 
+            Package (0x04) { 0x001EFFFF, 0x00, LNKB, 0x00 }, 
+            Package (0x04) { 0x001EFFFF, 0x01, LNKE, 0x00 }, 
+            Package (0x04) { 0x001BFFFF, 0x00, LNKA, 0x00 }, 
+            Package (0x04) { 0x001CFFFF, 0x00, LNKA, 0x00 }, 
+            Package (0x04) { 0x001CFFFF, 0x01, LNKB, 0x00 }, 
+            Package (0x04) { 0x001CFFFF, 0x02, LNKC, 0x00 }, 
+            Package (0x04) { 0x001CFFFF, 0x03, LNKD, 0x00 }, 
+            Package (0x04) { 0x0002FFFF, 0x00, LNKA, 0x00 }
+        })
+        Name (AR00, Package (0x12)
+        {
+            Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x10 }, 
+            Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x11 }, 
+            Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x12 }, 
+            Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x13 }, 
+            Package (0x04) { 0x001FFFFF, 0x00, 0x00, 0x12 }, 
+            Package (0x04) { 0x001FFFFF, 0x01, 0x00, 0x13 }, 
+            Package (0x04) { 0x001DFFFF, 0x00, 0x00, 0x17 }, 
+            Package (0x04) { 0x001DFFFF, 0x01, 0x00, 0x13 }, 
+            Package (0x04) { 0x001DFFFF, 0x02, 0x00, 0x12 }, 
+            Package (0x04) { 0x001DFFFF, 0x03, 0x00, 0x10 }, 
+            Package (0x04) { 0x001EFFFF, 0x00, 0x00, 0x11 }, 
+            Package (0x04) { 0x001EFFFF, 0x01, 0x00, 0x14 }, 
+            Package (0x04) { 0x001BFFFF, 0x00, 0x00, 0x10 }, 
+            Package (0x04) { 0x001CFFFF, 0x00, 0x00, 0x10 }, 
+            Package (0x04) { 0x001CFFFF, 0x01, 0x00, 0x11 }, 
+            Package (0x04) { 0x001CFFFF, 0x02, 0x00, 0x12 }, 
+            Package (0x04) { 0x001CFFFF, 0x03, 0x00, 0x13 }, 
+            Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x10 }
+        })
+        Name (PR01, Package (0x1D)
+        {
+            Package (0x04) { 0xFFFF, 0x00, LNKA, 0x00 }, 
+            Package (0x04) { 0x0001FFFF, 0x00, LNKE, 0x00 }, 
+            Package (0x04) { 0x0001FFFF, 0x01, LNKF, 0x00 }, 
+            Package (0x04) { 0x0001FFFF, 0x02, LNKG, 0x00 }, 
+            Package (0x04) { 0x0001FFFF, 0x03, LNKH, 0x00 }, 
+            Package (0x04) { 0x0002FFFF, 0x00, LNKF, 0x00 }, 
+            Package (0x04) { 0x0002FFFF, 0x01, LNKG, 0x00 }, 
+            Package (0x04) { 0x0002FFFF, 0x02, LNKH, 0x00 }, 
+            Package (0x04) { 0x0002FFFF, 0x03, LNKE, 0x00 }, 
+            Package (0x04) { 0x0003FFFF, 0x00, LNKG, 0x00 }, 
+            Package (0x04) { 0x0003FFFF, 0x01, LNKH, 0x00 }, 
+            Package (0x04) { 0x0003FFFF, 0x02, LNKE, 0x00 }, 
+            Package (0x04) { 0x0003FFFF, 0x03, LNKF, 0x00 }, 
+            Package (0x04) { 0x0004FFFF, 0x00, LNKH, 0x00 }, 
+            Package (0x04) { 0x0004FFFF, 0x01, LNKE, 0x00 }, 
+            Package (0x04) { 0x0004FFFF, 0x02, LNKF, 0x00 }, 
+            Package (0x04) { 0x0004FFFF, 0x03, LNKG, 0x00 }, 
+            Package (0x04) { 0x0005FFFF, 0x00, LNKD, 0x00 }, 
+            Package (0x04) { 0x0005FFFF, 0x01, LNKC, 0x00 }, 
+            Package (0x04) { 0x0005FFFF, 0x02, LNKB, 0x00 }, 
+            Package (0x04) { 0x0005FFFF, 0x03, LNKA, 0x00 }, 
+            Package (0x04) { 0x0006FFFF, 0x00, LNKC, 0x00 }, 
+            Package (0x04) { 0x0006FFFF, 0x01, LNKB, 0x00 }, 
+            Package (0x04) { 0x0006FFFF, 0x02, LNKA, 0x00 }, 
+            Package (0x04) { 0x0006FFFF, 0x03, LNKD, 0x00 }, 
+            Package (0x04) { 0x0009FFFF, 0x00, LNKF, 0x00 }, 
+            Package (0x04) { 0x0009FFFF, 0x01, LNKG, 0x00 }, 
+            Package (0x04) { 0x0009FFFF, 0x02, LNKH, 0x00 }, 
+            Package (0x04) { 0x0009FFFF, 0x03, LNKE, 0x00 }
+	})
+        Name (AR01, Package (0x1D)
+        {
+            Package (0x04) { 0xFFFF, 0x00, 0x00, 0x10 }, 
+            Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x14 }, 
+            Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x15 }, 
+            Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x16 }, 
+            Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x17 }, 
+            Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x15 }, 
+            Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x16 }, 
+            Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x17 }, 
+            Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x14 }, 
+            Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x16 }, 
+            Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x17 }, 
+            Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x14 }, 
+            Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x15 }, 
+            Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x17 }, 
+            Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x14 }, 
+            Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x15 }, 
+            Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x16 }, 
+            Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x13 }, 
+            Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x12 }, 
+            Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x11 }, 
+            Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x10 }, 
+            Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x12 }, 
+            Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x11 }, 
+            Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x10 }, 
+            Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x13 }, 
+            Package (0x04) { 0x0009FFFF, 0x00, 0x00, 0x15 }, 
+            Package (0x04) { 0x0009FFFF, 0x01, 0x00, 0x16 }, 
+            Package (0x04) { 0x0009FFFF, 0x02, 0x00, 0x17 }, 
+            Package (0x04) { 0x0009FFFF, 0x03, 0x00, 0x14 }
+        })
+        Name (PR04, Package (0x04)
+        {
+            Package (0x04) { 0xFFFF, 0x00, LNKA, 0x00 }, 
+            Package (0x04) { 0xFFFF, 0x01, LNKB, 0x00 }, 
+            Package (0x04) { 0xFFFF, 0x02, LNKC, 0x00 }, 
+            Package (0x04) { 0xFFFF, 0x03, LNKD, 0x00 }
+        })
+        Name (AR04, Package (0x04)
+        {
+            Package (0x04) { 0xFFFF, 0x00, 0x00, 0x10 }, 
+            Package (0x04) { 0xFFFF, 0x01, 0x00, 0x11 }, 
+            Package (0x04) { 0xFFFF, 0x02, 0x00, 0x12 }, 
+            Package (0x04) { 0xFFFF, 0x03, 0x00, 0x13 }
+        })
+        Name (PR05, Package (0x01)
+        {
+            Package (0x04) { 0xFFFF, 0x00, LNKB, 0x00 }
+        })
+        Name (AR05, Package (0x01)
+        {
+            Package (0x04) { 0xFFFF, 0x00, 0x00, 0x11 }
+        })
+        Name (PR06, Package (0x01)
+        {
+            Package (0x04) { 0xFFFF, 0x00, LNKC, 0x00 }
+        })
+        Name (AR06, Package (0x01)
+        {
+            Package (0x04) { 0xFFFF, 0x00, 0x00, 0x12 }
+        })
+        Name (PR07, Package (0x04)
+        {
+            Package (0x04) { 0xFFFF, 0x00, LNKD, 0x00 }, 
+            Package (0x04) { 0xFFFF, 0x01, LNKA, 0x00 }, 
+            Package (0x04) { 0xFFFF, 0x02, LNKB, 0x00 }, 
+            Package (0x04) { 0xFFFF, 0x03, LNKC, 0x00 }
+        })
+        Name (AR07, Package (0x04)
+        {
+            Package (0x04) { 0xFFFF, 0x00, 0x00, 0x13 }, 
+            Package (0x04) { 0xFFFF, 0x01, 0x00, 0x10 }, 
+            Package (0x04) { 0xFFFF, 0x02, 0x00, 0x11 }, 
+            Package (0x04) { 0xFFFF, 0x03, 0x00, 0x12 }
+        })
+        Name (PR08, Package (0x04)
+        {
+            Package (0x04) { 0xFFFF, 0x00, LNKA, 0x00 }, 
+            Package (0x04) { 0xFFFF, 0x01, LNKB, 0x00 }, 
+            Package (0x04) { 0xFFFF, 0x02, LNKC, 0x00 }, 
+            Package (0x04) { 0xFFFF, 0x03, LNKD, 0x00 }
+        })
+        Name (AR08, Package (0x04)
+        {
+            Package (0x04) { 0xFFFF, 0x00, 0x00, 0x10 }, 
+            Package (0x04) { 0xFFFF, 0x01, 0x00, 0x11 }, 
+            Package (0x04) { 0xFFFF, 0x02, 0x00, 0x12 }, 
+            Package (0x04) { 0xFFFF, 0x03, 0x00, 0x13 }
+        })
+        Name (PR09, Package (0x04)
+        {
+            Package (0x04) { 0xFFFF, 0x00, LNKB, 0x00 }, 
+            Package (0x04) { 0xFFFF, 0x01, LNKC, 0x00 }, 
+            Package (0x04) { 0xFFFF, 0x02, LNKD, 0x00 }, 
+            Package (0x04) { 0xFFFF, 0x03, LNKA, 0x00 }
+        })
+        Name (AR09, Package (0x04)
+        {
+            Package (0x04) { 0xFFFF, 0x00, 0x00, 0x11 }, 
+            Package (0x04) { 0xFFFF, 0x01, 0x00, 0x12 }, 
+            Package (0x04) { 0xFFFF, 0x02, 0x00, 0x13 }, 
+            Package (0x04) { 0xFFFF, 0x03, 0x00, 0x10 }
+        })
+
+        Device (LNKA)
+        {
+            Name (_HID, EisaId ("PNP0C0F"))
+            Name (_UID, 0x01)
+        }
+
+        Device (LNKB)
+        {
+            Name (_HID, EisaId ("PNP0C0F"))
+            Name (_UID, 0x02)
+        }
+
+        Device (LNKC)
+        {
+            Name (_HID, EisaId ("PNP0C0F"))
+            Name (_UID, 0x03)
+        }
+
+        Device (LNKD)
+        {
+            Name (_HID, EisaId ("PNP0C0F"))
+            Name (_UID, 0x04)
+        }
+
+        Device (LNKE)
+        {
+            Name (_HID, EisaId ("PNP0C0F"))
+            Name (_UID, 0x05)
+        }
+
+        Device (LNKF)
+        {
+            Name (_HID, EisaId ("PNP0C0F"))
+            Name (_UID, 0x06)
+        }
+
+        Device (LNKG)
+        {
+            Name (_HID, EisaId ("PNP0C0F"))
+            Name (_UID, 0x07)
+        }
+
+        Device (LNKH)
+        {
+            Name (_HID, EisaId ("PNP0C0F"))
+            Name (_UID, 0x08)
+        }
+    }
+
+    Name (\_S0, Package (0x04)
+    { 0x00, 0x00, 0x00, 0x00 })
+    Name (\_S1, Package (0x04)
+    { 0x01, 0x00, 0x00, 0x00 })
+    Name (\_S3, Package (0x04)
+    { 0x05, 0x00, 0x00, 0x00 })
+    Name (\_S4, Package (0x04)
+    { 0x06, 0x00, 0x00, 0x00 })
+    Name (\_S5, Package (0x04)
+    { 0x07, 0x00, 0x00, 0x00 })
+}
+
diff --git a/src/mainboard/kontron/986lcd-m/fadt.c b/src/mainboard/kontron/986lcd-m/fadt.c
new file mode 100644
index 0000000000..3e8b45a876
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/fadt.c
@@ -0,0 +1,86 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <string.h>
+#include <device/pci.h>
+#include <arch/acpi.h>
+
+void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+	acpi_header_t *header = &(fadt->header);
+	u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), 0x40) & 0xfffe;
+
+	memset((void *) fadt, 0, sizeof(acpi_fadt_t));
+	memcpy(header->signature, "FACP", 4);
+	header->length = 132;
+	header->revision = 1;
+	memcpy(header->oem_id, "CORE  ", 6);
+	memcpy(header->oem_table_id, "COREBOOT", 8);
+	memcpy(header->asl_compiler_id, "CORE", 4);
+	header->asl_compiler_revision = 0;
+
+	fadt->firmware_ctrl = (unsigned long) facs;
+	fadt->dsdt = (unsigned long) dsdt;
+	fadt->preferred_pm_profile = 0;
+	fadt->sci_int = 0x9;
+	fadt->smi_cmd = 0xb2;
+	fadt->acpi_enable = 0xe1;
+	fadt->acpi_disable = 0x1e;
+	fadt->s4bios_req = 0x0;
+	fadt->pstate_cnt = 0xe2;
+
+	fadt->pm1a_evt_blk = pmbase;
+	fadt->pm1b_evt_blk = 0x0;
+	fadt->pm1a_cnt_blk = pmbase + 0x4;
+	fadt->pm1b_cnt_blk = 0x0;
+	fadt->pm2_cnt_blk = pmbase + 0x20;
+	fadt->pm_tmr_blk = pmbase + 0x8;
+	fadt->gpe0_blk = pmbase + 0x28;
+	fadt->gpe1_blk = 0;
+
+	fadt->pm1_evt_len = 4;
+	fadt->pm1_cnt_len = 2;
+	fadt->pm2_cnt_len = 1;
+	fadt->pm_tmr_len = 4;
+	fadt->gpe0_blk_len = 8;
+	fadt->gpe1_blk_len = 0;
+	fadt->gpe1_base = 0;
+	fadt->cst_cnt = 0xe3;
+	fadt->p_lvl2_lat = 1;
+	fadt->p_lvl3_lat = 85;
+	fadt->flush_size = 1024;
+	fadt->flush_stride = 16;
+	fadt->duty_offset = 1;
+	fadt->duty_width = 0;
+	fadt->day_alrm = 0xd;
+	fadt->mon_alrm = 0x00;
+	fadt->century = 0x00;
+	fadt->iapc_boot_arch = 0x03;
+	fadt->flags = 0x80a5;
+	// wbinvd is operational
+	// all cpus support c1
+	// sleep button is generic
+	// rtc wakeup/s4 not possible
+	
+	header->checksum =
+	    acpi_checksum((void *) fadt, header->length);
+
+}
diff --git a/src/mainboard/kontron/986lcd-m/irq_tables.c b/src/mainboard/kontron/986lcd-m/irq_tables.c
new file mode 100644
index 0000000000..6aa36bf026
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/irq_tables.c
@@ -0,0 +1,63 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <arch/pirq_routing.h>
+
+const struct irq_routing_table intel_irq_routing_table = {
+	PIRQ_SIGNATURE,  /* u32 signature */
+	PIRQ_VERSION,    /* u16 version   */
+	32+16*18,	 /* There can be total 18 devices on the bus */
+	0x00,		 /* Where the interrupt router lies (bus) */
+	(0x1f<<3)|0x0,   /* Where the interrupt router lies (dev) */
+	0,		 /* IRQs devoted exclusively to PCI usage */
+	0x8086,		 /* Vendor */
+	0x27b0,		 /* Device */
+	0,		 /* miniport */
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
+	0xf,		 /* u8 checksum. */
+	{
+		/* bus,     dev|fn,   {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap},  slot, rfu */
+		{0x00,(0x01<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // PCIe?
+		{0x00,(0x02<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // VGA
+		{0x00,(0x1e<<3)|0x0, {{0x61, 0xdcf8}, {0x68, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // PCI bridge
+		{0x00,(0x1f<<3)|0x0, {{0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // LPC
+		{0x00,(0x1d<<3)|0x0, {{0x6b, 0xdcf8}, {0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x60, 0x0dcf8}}, 0x0, 0x0}, // USB#1
+		{0x00,(0x1b<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Audio device
+		{0x00,(0x1c<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x2, 0x0}, // PCIe bridge
+		{0x04,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x00000}}, 0x0, 0x0}, // Firewire
+		{0x04,(0x01<<3)|0x0, {{0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0x0dcf8}}, 0x1, 0x0}, // PCI Bridge
+		{0x04,(0x02<<3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x2, 0x0},
+		{0x04,(0x03<<3)|0x0, {{0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0x0dcf8}}, 0x3, 0x0},
+		{0x04,(0x04<<3)|0x0, {{0x6b, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0x0dcf8}}, 0x4, 0x0},
+		{0x04,(0x05<<3)|0x0, {{0x63, 0xdcd8}, {0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0x0dcf8}}, 0x5, 0x0},
+		{0x04,(0x06<<3)|0x0, {{0x62, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0xdcf8}, {0x63, 0x0dcd8}}, 0x6, 0x0},
+		{0x04,(0x09<<3)|0x0, {{0x69, 0xdcf8}, {0x6a, 0xdcf8}, {0x6b, 0xdcf8}, {0x68, 0x0dcf8}}, 0x9, 0x0},
+		{0x01,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x0, 0x0}, // Ethernet 8168
+		{0x02,(0x00<<3)|0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0x0dcd8}}, 0x9, 0x0},
+		{0x03,(0x00<<3)|0x0, {{0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0xdcd8}, {0x60, 0x0dcf8}}, 0xa, 0x0},
+	}
+};
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+	return copy_pirq_routing_table(addr);
+}
+
diff --git a/src/mainboard/kontron/986lcd-m/mainboard.c b/src/mainboard/kontron/986lcd-m/mainboard.c
new file mode 100644
index 0000000000..17b23a2462
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/mainboard.c
@@ -0,0 +1,29 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+
+#include <device/device.h>
+#include "chip.h"
+
+struct chip_operations mainboard_kontron_986lcd_m_ops = {
+	CHIP_NAME("Kontron 986LCD-M Mainboard")
+};
+
diff --git a/src/mainboard/kontron/986lcd-m/mptable.c b/src/mainboard/kontron/986lcd-m/mptable.c
new file mode 100644
index 0000000000..a239b3ff0c
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/mptable.c
@@ -0,0 +1,131 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <string.h>
+#include <stdint.h>
+
+void *smp_write_config_table(void *v)
+{
+        static const char sig[4] = "PCMP";
+        static const char oem[8] = "COREBOOT";
+        static const char productid[12] = "986LCD-M    ";
+        struct mp_config_table *mc;
+	int i;
+	int max_pci_bus, isa_bus;
+
+        mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+        memset(mc, 0, sizeof(*mc));
+
+        memcpy(mc->mpc_signature, sig, sizeof(sig));
+        mc->mpc_length = sizeof(*mc); /* initially just the header */
+        mc->mpc_spec = 0x04;
+        mc->mpc_checksum = 0; /* not yet computed */
+        memcpy(mc->mpc_oem, oem, sizeof(oem));
+        memcpy(mc->mpc_productid, productid, sizeof(productid));
+        mc->mpc_oemptr = 0;
+        mc->mpc_oemsize = 0;
+        mc->mpc_entry_count = 0; /* No entries yet... */
+        mc->mpc_lapic = LAPIC_ADDR;
+        mc->mpe_length = 0;
+        mc->mpe_checksum = 0;
+        mc->reserved = 0;
+
+        smp_write_processors(mc);
+
+	max_pci_bus = 5; // XXX read me from bridges.
+
+	/* ISA bus follows */
+	isa_bus = max_pci_bus + 1;
+
+	/* Bus:		Bus ID	Type */
+	for (i=0; i <= max_pci_bus; i++)
+		smp_write_bus(mc, i, "PCI   ");
+
+	smp_write_bus(mc, isa_bus, "ISA   ");
+
+	/* I/O APICs:	APIC ID	Version	State		Address */
+	smp_write_ioapic(mc, 2, 0x20, 0xfec00000);
+
+	/* Legacy Interrupts */
+
+	/* I/O Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN# */	
+	smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, 0x2, 0x0);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x1, 0x2, 0x1);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, 0x2, 0x2);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x3, 0x2, 0x3);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x4, 0x2, 0x4);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, isa_bus, 0x8, 0x2, 0x8);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x9, 0x2, 0x9);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xa, 0x2, 0xa);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xb, 0x2, 0xb);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xc, 0x2, 0xc);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xd, 0x2, 0xd);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xe, 0x2, 0xe);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0xf, 0x2, 0xf);
+
+	/* Builtin devices on Bus 0 */
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x8, 0x2, 0x10);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x7d, 0x2, 0x13);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x74, 0x2, 0x17);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x75, 0x2, 0x13);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x76, 0x2, 0x12);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x77, 0x2, 0x10);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x6c, 0x2, 0x10);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x70, 0x2, 0x10);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x71, 0x2, 0x11);
+
+	/* Firewire 4:0.0 */
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x0, 0x2, 0x10);
+
+	// riser slot top 5:8.0
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x20, 0x2, 0x14);
+	// riser slot middle 5:9.0
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x24, 0x2, 0x15);
+	// riser slot bottom 5:a.0
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x28, 0x2, 0x16);
+
+	/* Onboard Ethernet */
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, 0x0, 0x2, 0x10);
+
+	/* Local Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN# */
+	smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x0);
+	smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x1);
+
+	/* Compute the checksums */
+	mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+	mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+
+	printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc));
+
+	return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+	void *v;
+	v = smp_write_floating_table(addr);
+	return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/kontron/986lcd-m/power_reset_check.c b/src/mainboard/kontron/986lcd-m/power_reset_check.c
new file mode 100644
index 0000000000..53ec28f4bb
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/power_reset_check.c
@@ -0,0 +1,31 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+
+static void power_down_reset_check(void)
+{
+	uint8_t cmos;
+
+	cmos=cmos_read(RTC_BOOT_BYTE)>>4 ;
+	printk_debug("Boot byte = %x\r\n", cmos);
+
+	if((cmos>2)&&(cmos&1))  full_reset();
+}
diff --git a/src/mainboard/kontron/986lcd-m/reset.c b/src/mainboard/kontron/986lcd-m/reset.c
new file mode 100644
index 0000000000..3e03a392bc
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/reset.c
@@ -0,0 +1,33 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+
+void soft_reset(void)
+{
+        outb(0x04, 0xcf9);
+}
+
+void hard_reset(void)
+{
+        outb(0x02, 0xcf9);
+        outb(0x06, 0xcf9);
+}
diff --git a/src/mainboard/kontron/986lcd-m/rtl8168.c b/src/mainboard/kontron/986lcd-m/rtl8168.c
new file mode 100644
index 0000000000..18f41fe32a
--- /dev/null
+++ b/src/mainboard/kontron/986lcd-m/rtl8168.c
@@ -0,0 +1,49 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* This code should work for all ICH* southbridges with a NIC. */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+
+static void nic_init(struct device *dev)
+{
+	printk_debug("Initializing RTL8168 Gigabit Ethernet\n");
+	// Nothing to do yet, but this has to be here to keep 
+	// coreboot from trying to execute an option ROM.
+}
+
+static struct device_operations nic_ops = {
+	.read_resources		= pci_dev_read_resources,
+	.set_resources		= pci_dev_set_resources,
+	.enable_resources	= pci_dev_enable_resources,
+	.init			= nic_init,
+	.scan_bus		= 0,
+};
+
+static const struct pci_driver rtl8169_nic __pci_driver = {
+	.ops	= &nic_ops,
+	.vendor	= 0x10ec,
+	.device	= 0x8168,
+};
+
+