summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorLuc Verhaegen <libv@skynet.be>2009-07-23 16:04:58 +0000
committerLuc Verhaegen <libv@skynet.be>2009-07-23 16:04:58 +0000
commitaeb6c9870f0b1af8c0b55b2034f881da6757c4a4 (patch)
tree6f9087fe2504975d35b81c2e298189065b58daee /src
parentb2bd9963a5ceb4fc6751f2303dab5bfea43d4293 (diff)
downloadcoreboot-aeb6c9870f0b1af8c0b55b2034f881da6757c4a4.tar.xz
sb/via/k8t890: add vga textmode code for k8m890 chrome igp.
Add initialisation for the VIA Chrome 9 IGP on the k8m890 through native code and through the general vga infrastructure i committed a month or two ago. Add videoram_size option for k8m890 and the Asus M2V-MX SE. Now the Asus M2V-MX SE will magically come up with a working standard VGA 80x25 textmode. Many thanks to the people who worked hard on the Asus M2V-MX SE, and all of its components; this vga bringup was a breeze thanks to your hard work for this excellently supported board. And separate thanks to Rudolf Marek for spurring me on and for providing a register dump. Signed-off-by: Luc Verhaegen <libv@skynet.be> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4465 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/asus/m2v-mx_se/Options.lb7
-rw-r--r--src/mainboard/asus/m2v-mx_se/cmos.layout8
-rw-r--r--src/southbridge/via/k8t890/Config.lb1
-rw-r--r--src/southbridge/via/k8t890/k8m890_chrome.c179
-rw-r--r--src/southbridge/via/k8t890/k8t890.h3
-rw-r--r--src/southbridge/via/k8t890/k8t890_dram.c43
6 files changed, 235 insertions, 6 deletions
diff --git a/src/mainboard/asus/m2v-mx_se/Options.lb b/src/mainboard/asus/m2v-mx_se/Options.lb
index 75925ea885..203f770bf9 100644
--- a/src/mainboard/asus/m2v-mx_se/Options.lb
+++ b/src/mainboard/asus/m2v-mx_se/Options.lb
@@ -44,7 +44,7 @@ uses CONFIG_XIP_ROM_SIZE
uses CONFIG_XIP_ROM_BASE
uses CONFIG_STACK_SIZE
uses CONFIG_HEAP_SIZE
-# uses CONFIG_USE_OPTION_TABLE
+uses CONFIG_USE_OPTION_TABLE
uses CONFIG_LB_MEM_TOPK
uses CONFIG_HAVE_ACPI_TABLES
uses CONFIG_HAVE_MAINBOARD_RESOURCES
@@ -74,6 +74,7 @@ uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_HAVE_INIT_TIMER
uses CONFIG_GDB_STUB
+uses CONFIG_VGA
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
# bx_b001- uses K8_HW_MEM_HOLE_SIZEK
@@ -101,7 +102,7 @@ default CONFIG_HAVE_HARD_RESET = 1
default CONFIG_HAVE_PIRQ_TABLE = 0
default CONFIG_IRQ_SLOT_COUNT = 11 # FIXME?
default CONFIG_HAVE_MP_TABLE = 0
-default CONFIG_HAVE_OPTION_TABLE = 0 # FIXME
+default CONFIG_HAVE_OPTION_TABLE = 1 # FIXME
# Move the default coreboot CMOS range off of AMD RTC registers.
default CONFIG_LB_CKS_RANGE_START = 49
default CONFIG_LB_CKS_RANGE_END = 122
@@ -136,6 +137,7 @@ default CONFIG_SB_HT_CHAIN_ON_BUS0 = 1
# Only offset for SB chain?, default is yes(1).
default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0
+default CONFIG_VGA = 1
default CONFIG_CONSOLE_VGA = 1 # Needed for VGA.
default CONFIG_PCI_ROM_RUN = 0 # Needed for VGA.
default CONFIG_USE_DCACHE_RAM = 1
@@ -157,6 +159,7 @@ default CONFIG_HEAP_SIZE = 256 * 1024
default CONFIG_LB_MEM_TOPK = 32768
# to 1MB
default CONFIG_RAMBASE = 0x1F00000
+default CONFIG_USE_OPTION_TABLE = 0
# default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
default CONFIG_ROM_PAYLOAD = 1
default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
diff --git a/src/mainboard/asus/m2v-mx_se/cmos.layout b/src/mainboard/asus/m2v-mx_se/cmos.layout
index 758c8dc4ee..827637608d 100644
--- a/src/mainboard/asus/m2v-mx_se/cmos.layout
+++ b/src/mainboard/asus/m2v-mx_se/cmos.layout
@@ -43,6 +43,7 @@ entries
440 4 e 9 slow_cpu
444 1 e 1 nmi
445 1 e 1 iommu
+448 3 e 10 videoram_size
728 256 h 0 user_data
984 16 h 0 check_sum
# Reserve the extended AMD configuration registers
@@ -90,6 +91,13 @@ enumerations
9 5 37.5%
9 6 25.0%
9 7 12.5%
+# videoram_size: mimics the bits in the ramcontroller.
+10 1 8MB
+10 2 16MB
+10 3 32MB
+10 4 64MB
+10 5 128MB
+10 6 256MB
checksums
diff --git a/src/southbridge/via/k8t890/Config.lb b/src/southbridge/via/k8t890/Config.lb
index 27e80b92a7..72502c2d64 100644
--- a/src/southbridge/via/k8t890/Config.lb
+++ b/src/southbridge/via/k8t890/Config.lb
@@ -25,3 +25,4 @@ driver k8t890_host_ctrl.o
driver k8t890_pcie.o
driver k8t890_traf_ctrl.o
driver k8t890_error.o
+driver k8m890_chrome.o
diff --git a/src/southbridge/via/k8t890/k8m890_chrome.c b/src/southbridge/via/k8t890/k8m890_chrome.c
new file mode 100644
index 0000000000..544b08e9d9
--- /dev/null
+++ b/src/southbridge/via/k8t890/k8m890_chrome.c
@@ -0,0 +1,179 @@
+/*
+ * Copyright (C) 2007-2009 Luc Verhaegen <libv@skynet.be>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 51
+ * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h> /* for memset */
+#include "k8t890.h"
+
+#if CONFIG_VGA == 1
+#include <pc80/vga_io.h>
+#include <pc80/vga.h>
+#include <arch/io.h>
+
+/*
+ *
+ */
+static void
+chrome_vga_init(struct device *dev)
+{
+ vga_sr_write(0x10, 0x01); /* unlock extended regs */
+
+ vga_sr_mask(0x1A, 0x02, 0x02); /* enable mmio */
+
+ vga_sr_mask(0x1A, 0x40, 0x40); /* Software Reset */
+
+ vga_cr_mask(0x6A, 0x00, 0xC8); /* Disable CRTC2 & Simultaneous */
+
+ /* Make sure that non of the primary VGA overflow registers are set */
+ vga_cr_write(0x33, 0x00);
+ vga_cr_write(0x35, 0x00);
+ vga_cr_mask(0x11, 0x00, 0x30);
+
+ vga_sr_mask(0x16, 0x00, 0x40); /* Wire CRT to CRTC1 */
+ vga_cr_mask(0x36, 0x00, 0x30); /* Power on CRT */
+
+ /* Disable Extended Display Mode */
+ vga_sr_mask(0x15, 0x00, 0x02);
+
+ /* Disable Wrap-around */
+ vga_sr_mask(0x15, 0x00, 0x20);
+
+ /* Disable Extended Mode memory access */
+ vga_sr_mask(0x1A, 0x00, 0x08);
+
+ /* Make sure that we only touch CRTC1s DAC */
+ vga_sr_mask(0x1A, 0x00, 0x01);
+
+ /* Set up power to the clocks/crtcs */
+ vga_sr_mask(0x19, 0x7F, 0x7F); /* enable clock gating for all. */
+ vga_sr_mask(0x1B, 0xC0, 0xC0); /* secondary clock according to pm */
+ vga_sr_mask(0x1B, 0x20, 0x30); /* primary clock is always on */
+
+ /* set everything according to PM/Engine idle state except pci dma */
+ vga_sr_write(0x2D, 0xFF); /* Power management control 1 */
+ vga_sr_write(0x2E, 0xFB); /* Power management control 2 */
+ vga_sr_write(0x3F, 0xFF); /* Power management control 3 */
+
+ /* now set up the engine clock. */
+ vga_sr_write(0x47, 0xB8);
+ vga_sr_write(0x48, 0x08);
+ vga_sr_write(0x49, 0x03);
+
+ /* trigger engine clock setting */
+ vga_sr_mask(0x40, 0x01, 0x01);
+ vga_sr_mask(0x40, 0, 0x01);
+
+ vga_cr_mask(0x30, 0x04, 0x04); /* Enable PowerNow in primary path */
+ vga_cr_mask(0x36, 0x01, 0x01); /* Enable PCI Power Management */
+
+ /* Power now indicators... */
+ vga_cr_write(0x41, 0xB9);
+ vga_cr_write(0x42, 0xB4);
+ /* could these be the CRTC2 power now indicators? */
+ vga_cr_write(0x9D, 0x80); /* Power Now Ending position enable */
+ vga_cr_write(0x9E, 0xB4); /* Power Now Control 3 */
+
+ /* primary fifo setting */
+ vga_sr_mask(0x16, 0x28, 0xBF); /* pthreshold: 160 */
+ vga_sr_write(0x17, 0x60); /* max depth: 194 */
+ vga_sr_mask(0x18, 0x0E, 0xBF); /* high priority threshold: 56 */
+ vga_sr_write(0x1C, 0x54); /* Fetch count */
+
+ vga_sr_write(0x20, 0x40); /* display queue typical arbiter control 0 */
+ vga_sr_write(0x21, 0x40); /* display queue typical arbiter control 1 */
+ vga_sr_mask(0x22, 0x14, 0x1F); /* display queue expire number */
+
+ /* Typical Arbiter Control */
+ vga_sr_mask(0x41, 0x40, 0xF0); /* Request threshold */
+ vga_sr_mask(0x42, 0x20, 0x20); /* Support Fetch Cycle with Length 2 */
+
+ vga_sr_write(0x50, 0x1F); /* AGP Control Register */
+ vga_sr_write(0x51, 0xF5); /* AGP FIFO Control 1 */
+
+ vga_cr_mask(0x33, 0x08, 0x08); /* Enable Prefetch Mode */
+}
+
+#endif /* CONFIG_VGA */
+
+/*
+ *
+ */
+static void
+chrome_init(struct device *dev)
+{
+ uint32_t fb_size, fb_address;
+
+ fb_size = k8m890_host_fb_size_get();
+ if (!fb_size) {
+ printk_warning("Chrome: Device has not been initialised in the"
+ " ramcontroller!\n");
+ return;
+ }
+
+ fb_address = pci_read_config32(dev, 0x10);
+ fb_address &= ~0x0F;
+ if (!fb_address) {
+ printk_warning("Chrome: No FB BAR assigned!\n");
+ return;
+ }
+
+ printk_info("Chrome: Using %dMB Framebuffer at 0x%08X.\n",
+ fb_size, fb_address);
+
+ //k8m890_host_fb_direct_set(fb_address);
+
+#if CONFIG_VGA == 1
+ /* Now set up the VGA console */
+ vga_io_init(); /* Enable full IO access */
+
+ chrome_vga_init(dev);
+
+ vga_textmode_init();
+
+#if CONFIG_CONSOLE_VGA == 1
+ vga_console_init();
+#endif
+
+ printk_info("Chrome VGA Textmode initialized.\n");
+
+#if CONFIG_CONSOLE_VGA == 0
+ /* if we don't have console, at least print something... */
+ vga_line_write(0, "Chrome VGA Textmode initialized.");
+#endif
+
+#endif /* CONFIG_VGA */
+}
+
+static struct device_operations
+chrome_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = chrome_init,
+ .scan_bus = 0,
+ .enable = 0,
+};
+
+static const struct pci_driver unichrome_driver __pci_driver = {
+ .ops = &chrome_ops,
+ .vendor = 0x1106,
+ .device = 0x3230,
+};
diff --git a/src/southbridge/via/k8t890/k8t890.h b/src/southbridge/via/k8t890/k8t890.h
index 59d47ee52c..221aec7edb 100644
--- a/src/southbridge/via/k8t890/k8t890.h
+++ b/src/southbridge/via/k8t890/k8t890.h
@@ -43,4 +43,7 @@
extern void writeback(struct device *dev, u16 where, u8 what);
extern void dump_south(device_t dev);
+int k8m890_host_fb_size_get(void);
+//void k8m890_host_fb_direct_set(uint32_t fb_address);
+
#endif
diff --git a/src/southbridge/via/k8t890/k8t890_dram.c b/src/southbridge/via/k8t890/k8t890_dram.c
index b32e5f870e..3a5d97ae2f 100644
--- a/src/southbridge/via/k8t890/k8t890_dram.c
+++ b/src/southbridge/via/k8t890/k8t890_dram.c
@@ -23,6 +23,7 @@
#include <console/console.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/mtrr.h>
+#include <pc80/mc146818rtc.h>
#include <bitops.h>
#include "k8t890.h"
@@ -104,18 +105,52 @@ extern uint64_t high_tables_base, high_tables_size;
#endif
}
+/*
+ *
+ */
+int
+k8m890_host_fb_size_get(void)
+{
+ struct device *dev = dev_find_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_K8M890CE_3, 0);
+ unsigned char tmp;
+
+ tmp = pci_read_config8(dev, 0xA1);
+ tmp >>= 4;
+ if (tmp & 0x08)
+ return 4 << (tmp & 7);
+ else
+ return 0;
+}
static void dram_init_fb(struct device *dev)
{
/* Important bits:
* Enable the internal GFX bit 7 of reg 0xa1 plus in same reg:
- * bits 6:4 X fbuffer size will be 2^(X+2) or 100 = 64MB, 101 = 128MB
+ * bits 6:4 X fbuffer size will be 2^(X+2) or 100 = 64MB, 101 = 128MB
* bits 3:0 BASE [31:28]
* reg 0xa0 bits 7:1 BASE [27:21] bit0 enable CPU access
*/
u8 tmp;
uint64_t proposed_base;
- unsigned int fbsize = (K8M890_FBSIZEMB * 1024 * 1024);
+ unsigned int fbbits = 0;
+ unsigned int fbsize;
+ int ret;
+
+
+ ret = get_option(&fbbits, "videoram_size");
+ if (ret) {
+ printk_warning("Failed to get videoram size (error %d), using default.\n", ret);
+ fbbits = 5;
+ }
+
+ if ((fbbits < 1) || (fbbits > 7)) {
+ printk_warning("Invalid videoram size (%d), using default.\n",
+ 4 << fbbits);
+ fbbits = 5;
+ }
+
+ fbsize = 4 << (fbbits + 20);
resmax = NULL;
search_global_resources(
@@ -131,13 +166,13 @@ static void dram_init_fb(struct device *dev)
proposed_base = resmax->base + resmax->size - fbsize;
resmax->size -= fbsize;
- printk_debug("VIA FB proposed base: %llx\n", proposed_base);
+ printk_info("K8M890: Using a %dMB framebuffer.\n", 4 << fbbits);
/* Step 1: enable UMA but no FB */
pci_write_config8(dev, 0xa1, 0x80);
/* Step 2: enough is just the FB size, the CPU accessible address is not needed */
- tmp = ((log2(K8M890_FBSIZEMB) - 2) << 4) | 0x80;
+ tmp = (fbbits << 4) | 0x80;
pci_write_config8(dev, 0xa1, tmp);
/* TODO K8 needs some UMA fine tuning too maybe call some generic routine here? */