- Added explanation of device tree enable.

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2052 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

3 files changed, 9 insertions, 0 deletions

diff --git a/src/southbridge/amd/amd8111/amd8111.c b/src/southbridge/amd/amd8111/amd8111.c
index 6f5f1beada..32797041f3 100644
--- a/src/southbridge/amd/amd8111/amd8111.c
+++ b/src/southbridge/amd/amd8111/amd8111.c
@@ -66,5 +66,8 @@ void amd8111_enable(device_t dev)
 
 struct chip_operations southbridge_amd_amd8111_ops = {
 	CHIP_NAME("AMD 8111")
+	/* This only called when this device is listed in the 
+	* static device tree.
+	*/
 	.enable_dev = amd8111_enable,
 };
diff --git a/src/southbridge/amd/amd8111/amd8111_acpi.c b/src/southbridge/amd/amd8111/amd8111_acpi.c
index 46a8e69510..f661ab478e 100644
--- a/src/southbridge/amd/amd8111/amd8111_acpi.c
+++ b/src/southbridge/amd/amd8111/amd8111_acpi.c
@@ -97,6 +97,7 @@ static void acpi_init(struct device *dev)
 
 	
 #endif
+	/* power on after power fail */
 	on = MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
 	get_option(&on, "power_on_after_fail");
 	byte = pci_read_config8(dev, PREVIOUS_POWER_STATE);
@@ -177,6 +178,10 @@ static struct device_operations acpi_ops  = {
 	.enable_resources = acpi_enable_resources,
 	.init             = acpi_init,
 	.scan_bus         = scan_static_bus,
+	/*  We don't need amd8111_enable, chip ops takes care of it.
+	 *  It could be useful if these devices were not 
+	 *  enabled by default.
+	 */
 //	.enable           = amd8111_enable,
 	.ops_pci          = &lops_pci,
 	.ops_smbus_bus    = &lops_smbus_bus,
diff --git a/src/southbridge/amd/amd8111/amd8111_pci.c b/src/southbridge/amd/amd8111/amd8111_pci.c
index 9fe1f98d32..b9a9b3578d 100644
--- a/src/southbridge/amd/amd8111/amd8111_pci.c
+++ b/src/southbridge/amd/amd8111/amd8111_pci.c
@@ -55,6 +55,7 @@ static struct device_operations pci_ops  = {
 	.enable_resources = pci_bus_enable_resources,
 	.init             = pci_init,
 	.scan_bus         = pci_scan_bridge,
+	/* PCI Subordinate bus reset is not implemented */
 	.ops_pci          = &lops_pci,
 };