summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorRichard Smith <smithbone@gmail.com>2006-07-24 04:25:47 +0000
committerRichard Smith <smithbone@gmail.com>2006-07-24 04:25:47 +0000
commitcb8eab482ff09ec256456312ef2d6e7710123551 (patch)
tree7bc1297911194e564b967efba4a03c4dde5f7a13 /src
parent4788effb045ae1f71d89c78a0b16a93d5ba79e89 (diff)
downloadcoreboot-cb8eab482ff09ec256456312ef2d6e7710123551.tar.xz
add framework for i440bx chipset
add support for NSC pc87351 SuperIO add Bitworks/IMS manboard config This is a very basic framework for the i440bx chipset and the Bitworks IMS board that uses it. Most things are structure only. Known issues: - SMbus reads to the RAM SPD come back all zero. - dump_spd_registers() is commented out since it breaks with the default setting of generic_dump_spd.c where it wants 2 memory controllers. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2347 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
-rw-r--r--src/cpu/intel/socket_PGA370/Config.lb3
-rw-r--r--src/cpu/intel/socket_PGA370/chip.h4
-rw-r--r--src/cpu/intel/socket_PGA370/socket_PGA370.c7
-rw-r--r--src/mainboard/bitworks/ims/Config.lb136
-rw-r--r--src/mainboard/bitworks/ims/Options.lb156
-rw-r--r--src/mainboard/bitworks/ims/auto.c154
-rw-r--r--src/mainboard/bitworks/ims/chip.h5
-rw-r--r--src/mainboard/bitworks/ims/cmos.layout74
-rw-r--r--src/mainboard/bitworks/ims/debug.c66
-rw-r--r--src/mainboard/bitworks/ims/failover.c32
-rw-r--r--src/mainboard/bitworks/ims/irq_tables.c32
-rw-r--r--src/mainboard/bitworks/ims/mainboard.c12
-rw-r--r--src/mainboard/bitworks/ims/reset.c43
-rw-r--r--src/northbridge/intel/i440bx/Config.lb2
-rw-r--r--src/northbridge/intel/i440bx/chip.h5
-rw-r--r--src/northbridge/intel/i440bx/northbridge.c186
-rw-r--r--src/northbridge/intel/i440bx/northbridge.h6
-rw-r--r--src/northbridge/intel/i440bx/raminit.c399
-rw-r--r--src/northbridge/intel/i440bx/raminit.h11
-rw-r--r--src/southbridge/intel/i440bx/chip.h13
-rw-r--r--src/southbridge/intel/i440bx/i440bx_early_smbus.c45
-rw-r--r--src/southbridge/intel/i440bx/i440bx_smbus.c43
-rw-r--r--src/southbridge/intel/i440bx/i440bx_smbus.h230
-rw-r--r--src/superio/NSC/pc87351/Config.lb2
-rw-r--r--src/superio/NSC/pc87351/chip.h17
-rw-r--r--src/superio/NSC/pc87351/pc87351.h9
-rw-r--r--src/superio/NSC/pc87351/pc87351_early_serial.c10
-rw-r--r--src/superio/NSC/pc87351/superio.c80
28 files changed, 1782 insertions, 0 deletions
diff --git a/src/cpu/intel/socket_PGA370/Config.lb b/src/cpu/intel/socket_PGA370/Config.lb
new file mode 100644
index 0000000000..8db263b5a0
--- /dev/null
+++ b/src/cpu/intel/socket_PGA370/Config.lb
@@ -0,0 +1,3 @@
+config chip.h
+object socket_PGA370.o
+dir /cpu/intel/model_6xx
diff --git a/src/cpu/intel/socket_PGA370/chip.h b/src/cpu/intel/socket_PGA370/chip.h
new file mode 100644
index 0000000000..469b662dfb
--- /dev/null
+++ b/src/cpu/intel/socket_PGA370/chip.h
@@ -0,0 +1,4 @@
+extern struct chip_operations cpu_intel_socket_PGA370_ops;
+
+struct cpu_intel_socket_PGA370_config {
+};
diff --git a/src/cpu/intel/socket_PGA370/socket_PGA370.c b/src/cpu/intel/socket_PGA370/socket_PGA370.c
new file mode 100644
index 0000000000..690e69d0a9
--- /dev/null
+++ b/src/cpu/intel/socket_PGA370/socket_PGA370.c
@@ -0,0 +1,7 @@
+#include <device/device.h>
+#include "chip.h"
+
+
+struct chip_operations cpu_intel_socket_PGA370_ops = {
+ CHIP_NAME("socket PGA370")
+};
diff --git a/src/mainboard/bitworks/ims/Config.lb b/src/mainboard/bitworks/ims/Config.lb
new file mode 100644
index 0000000000..357a1013ff
--- /dev/null
+++ b/src/mainboard/bitworks/ims/Config.lb
@@ -0,0 +1,136 @@
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+ default ROM_SECTION_SIZE = FALLBACK_SIZE
+ default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+ default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
+ default ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=65536
+default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+##
+## Set all of the defaults for an x86 architecture
+##
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+
+#if HAVE_PIRQ_TABLE object irq_tables.o end
+#object reset.o
+
+##
+## Romcc output
+##
+makerule ./failover.E
+ depends "$(MAINBOARD)/failover.c ./romcc"
+ action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+end
+
+makerule ./failover.inc
+ depends "$(MAINBOARD)/failover.c ./romcc"
+ action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+end
+
+makerule ./auto.E
+ depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+ action "./romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+makerule ./auto.inc
+ depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+ action "./romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+ldscript /cpu/x86/32bit/entry32.lds
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+else
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
+end
+
+### Should this be in the northbridge code?
+mainboardinit arch/i386/lib/cpu_reset.inc
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+###
+### This is the early phase of linuxBIOS startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if USE_FALLBACK_IMAGE
+ ldscript /arch/i386/lib/failover.lds
+ mainboardinit ./failover.inc
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+##
+## Setup RAM
+##
+mainboardinit cpu/x86/fpu/enable_fpu.inc
+mainboardinit cpu/x86/mmx/enable_mmx.inc
+mainboardinit ./auto.inc
+mainboardinit cpu/x86/mmx/disable_mmx.inc
+
+##
+## Include the secondary Configuration files
+##
+dir /pc80
+config chip.h
+
+chip northbridge/intel/i440bx
+ device pci_domain 0 on
+ end
+
+ chip cpu/intel/socket_PGA370
+ end
+
+end
+
diff --git a/src/mainboard/bitworks/ims/Options.lb b/src/mainboard/bitworks/ims/Options.lb
new file mode 100644
index 0000000000..a67e1495cb
--- /dev/null
+++ b/src/mainboard/bitworks/ims/Options.lb
@@ -0,0 +1,156 @@
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses USE_FALLBACK_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_HARD_RESET
+uses HAVE_OPTION_TABLE
+uses USE_OPTION_TABLE
+uses CONFIG_ROM_STREAM
+uses IRQ_SLOT_COUNT
+uses MAINBOARD
+uses MAINBOARD_VENDOR
+uses MAINBOARD_PART_NUMBER
+uses LINUXBIOS_EXTRA_VERSION
+uses ARCH
+uses FALLBACK_SIZE
+uses STACK_SIZE
+uses HEAP_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_STREAM_START
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses _RAMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses HAVE_MP_TABLE
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_CONSOLE_SERIAL8250
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses CONFIG_UDELAY_TSC
+
+## ROM_SIZE is the size of boot ROM that this board will use.
+default ROM_SIZE = 512*1024
+
+###
+### Build options
+###
+
+##
+## Build code for the fallback boot
+##
+default HAVE_FALLBACK_BOOT=1
+
+##
+## no MP table
+##
+default HAVE_MP_TABLE=0
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+default HAVE_HARD_RESET=0
+
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=0
+default IRQ_SLOT_COUNT=4
+#object irq_tables.o
+
+##
+## Build code to export a CMOS option table
+##
+default HAVE_OPTION_TABLE=0
+
+###
+### LinuxBIOS layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+default ROM_IMAGE_SIZE = 65536
+default FALLBACK_SIZE = 131072
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+default HEAP_SIZE=0x4000
+
+##
+## Only use the option table in a normal image
+##
+#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+default USE_OPTION_TABLE = 0
+
+default _RAMBASE = 0x00004000
+
+default CONFIG_ROM_STREAM = 1
+
+##
+## The default compiler
+##
+default CROSS_COMPILE=""
+default CC="$(CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## The Serial Console
+##
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default TTYS0_BAUD=115200
+#default TTYS0_BAUD=57600
+#default TTYS0_BAUD=38400
+#default TTYS0_BAUD=19200
+#default TTYS0_BAUD=9600
+#default TTYS0_BAUD=4800
+#default TTYS0_BAUD=2400
+#default TTYS0_BAUD=1200
+
+# Select the serial console base port
+default TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default TTYS0_LCS=0x3
+
+##
+### Select the linuxBIOS loglevel
+##
+## EMERG 1 system is unusable
+## ALERT 2 action must be taken immediately
+## CRIT 3 critical conditions
+## ERR 4 error conditions
+## WARNING 5 warning conditions
+## NOTICE 6 normal but significant condition
+## INFO 7 informational
+## DEBUG 8 debug-level messages
+## SPEW 9 Way too many details
+
+## Request this level of debugging output
+default DEFAULT_CONSOLE_LOGLEVEL=9
+## At a maximum only compile in this level of debugging
+default MAXIMUM_CONSOLE_LOGLEVEL=9
+
+default CONFIG_UDELAY_TSC=1
+
+end
+
diff --git a/src/mainboard/bitworks/ims/auto.c b/src/mainboard/bitworks/ims/auto.c
new file mode 100644
index 0000000000..c841d61044
--- /dev/null
+++ b/src/mainboard/bitworks/ims/auto.c
@@ -0,0 +1,154 @@
+#define ASSEMBLY 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <arch/hlt.h>
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+#include "southbridge/intel/i440bx/i440bx_early_smbus.c"
+#include "superio/NSC/pc87351/pc87351_early_serial.c"
+#include "northbridge/intel/i440bx/raminit.h"
+#include "cpu/x86/mtrr/earlymtrr.c"
+#include "cpu/x86/bist.h"
+
+#define SERIAL_DEV PNP_DEV(0x2e, PC87351_SP1)
+
+/*
+ */
+void udelay(int usecs)
+{
+ int i;
+ for(i = 0; i < usecs; i++)
+ outb(i&0xff, 0x80);
+}
+
+#include "debug.c"
+#include "lib/delay.c"
+
+
+static void memreset_setup(void)
+{
+}
+
+/*
+ static void memreset(int controllers, const struct mem_controller *ctrl)
+ {
+ }
+*/
+
+
+static void enable_mainboard_devices(void)
+{
+ device_t dev;
+ /* dev 0 for southbridge */
+
+ dev = pci_locate_device(PCI_ID(0x1106,0x8231), 0);
+
+ if (dev == PCI_DEV_INVALID) {
+ die("Southbridge not found!!!\n");
+ }
+ pci_write_config8(dev, 0x50, 7);
+ pci_write_config8(dev, 0x51, 0xff);
+#if 0
+ // This early setup switches IDE into compatibility mode before PCI gets
+ // // a chance to assign I/Os
+ // movl $CONFIG_ADDR(0, 0x89, 0x42), %eax
+ // // movb $0x09, %dl
+ // movb $0x00, %dl
+ // PCI_WRITE_CONFIG_BYTE
+ //
+#endif
+ /* we do this here as in V2, we can not yet do raw operations
+ * to pci!
+ */
+ dev += 0x100; /* ICKY */
+
+ pci_write_config8(dev, 0x42, 0);
+}
+
+static void enable_shadow_ram(void)
+{
+ device_t dev = 0; /* no need to look up 0:0.0 */
+ unsigned char shadowreg;
+ /* dev 0 for southbridge */
+ shadowreg = pci_read_config8(dev, 0x63);
+ /* 0xf0000-0xfffff */
+ shadowreg |= 0x30;
+ pci_write_config8(dev, 0x63, shadowreg);
+}
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+ unsigned char c;
+ c = smbus_read_byte(device, address);
+ return c;
+}
+
+
+#include "northbridge/intel/i440bx/raminit.c"
+#include "sdram/generic_sdram.c"
+//#include "sdram/generic_dump_spd.c"
+
+static void main(unsigned long bist)
+{
+ static const struct mem_controller cpu[] = {
+ {
+ .channel0 = {
+ (0xa << 3) | 0,
+ (0xa << 3) | 1,
+ (0xa << 3) | 2, (0xa << 3) | 3,
+ },
+ }
+ };
+ unsigned long x;
+
+ if (bist == 0) {
+ early_mtrr_init();
+ }
+ pc87351_enable_serial(SERIAL_DEV, TTYS0_BASE);
+ uart_init();
+ console_init();
+
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
+ enable_smbus();
+// dump_spd_registers(&cpu[0]);
+
+#if 0
+ enable_shadow_ram();
+ /*
+ memreset_setup();
+ this is way more generic than we need.
+ sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
+ */
+ sdram_set_registers((const struct mem_controller *) 0);
+ sdram_set_spd_registers((const struct mem_controller *) 0);
+ sdram_enable(0, (const struct mem_controller *) 0);
+#endif
+
+ /* Check all of memory */
+#if 0
+ ram_check(0x00000000, msr.lo);
+#endif
+#if 0
+ static const struct {
+ unsigned long lo, hi;
+ } check_addrs[] = {
+ /* Check 16MB of memory @ 0*/
+ { 0x00000000, 0x01000000 },
+#if TOTAL_CPUS > 1
+ /* Check 16MB of memory @ 2GB */
+ { 0x80000000, 0x81000000 },
+#endif
+ };
+ int i;
+ for(i = 0; i < sizeof(check_addrs)/sizeof(check_addrs[0]); i++) {
+ ram_check(check_addrs[i].lo, check_addrs[i].hi);
+ }
+#endif
+}
diff --git a/src/mainboard/bitworks/ims/chip.h b/src/mainboard/bitworks/ims/chip.h
new file mode 100644
index 0000000000..d0fe923429
--- /dev/null
+++ b/src/mainboard/bitworks/ims/chip.h
@@ -0,0 +1,5 @@
+extern struct chip_operations mainboard_bitworks_ims_ops;
+
+struct mainboard_bitworks_ims_config {
+ int nothing;
+};
diff --git a/src/mainboard/bitworks/ims/cmos.layout b/src/mainboard/bitworks/ims/cmos.layout
new file mode 100644
index 0000000000..5ba4c032c1
--- /dev/null
+++ b/src/mainboard/bitworks/ims/cmos.layout
@@ -0,0 +1,74 @@
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+1008 16 h 0 check_sum
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+
+checksums
+
+checksum 392 1007 1008
+
+
diff --git a/src/mainboard/bitworks/ims/debug.c b/src/mainboard/bitworks/ims/debug.c
new file mode 100644
index 0000000000..7eeabdef47
--- /dev/null
+++ b/src/mainboard/bitworks/ims/debug.c
@@ -0,0 +1,66 @@
+
+static void print_debug_pci_dev(unsigned dev)
+{
+ print_debug("PCI: ");
+ print_debug_hex8((dev >> 16) & 0xff);
+ print_debug_char(':');
+ print_debug_hex8((dev >> 11) & 0x1f);
+ print_debug_char('.');
+ print_debug_hex8((dev >> 8) & 7);
+}
+
+static void print_pci_devices(void)
+{
+ device_t dev;
+ for(dev = PCI_DEV(0, 0, 0);
+ dev <= PCI_DEV(0, 0x1f, 0x7);
+ dev += PCI_DEV(0,0,1)) {
+ uint32_t id;
+ id = pci_read_config32(dev, PCI_VENDOR_ID);
+ if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
+ (((id >> 16) & 0xffff) == 0xffff) ||
+ (((id >> 16) & 0xffff) == 0x0000)) {
+ continue;
+ }
+ print_debug_pci_dev(dev);
+ print_debug("\r\n");
+ }
+}
+
+static void dump_pci_device(unsigned dev)
+{
+ int i;
+ print_debug_pci_dev(dev);
+ print_debug("\r\n");
+
+ for(i = 0; i <= 255; i++) {
+ unsigned char val;
+ if ((i & 0x0f) == 0) {
+ print_debug_hex8(i);
+ print_debug_char(':');
+ }
+ val = pci_read_config8(dev, i);
+ print_debug_char(' ');
+ print_debug_hex8(val);
+ if ((i & 0x0f) == 0x0f) {
+ print_debug("\r\n");
+ }
+ }
+}
+
+static void dump_pci_devices(void)
+{
+ device_t dev;
+ for(dev = PCI_DEV(0, 0, 0);
+ dev <= PCI_DEV(0, 0x1f, 0x7);
+ dev += PCI_DEV(0,0,1)) {
+ uint32_t id;
+ id = pci_read_config32(dev, PCI_VENDOR_ID);
+ if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
+ (((id >> 16) & 0xffff) == 0xffff) ||
+ (((id >> 16) & 0xffff) == 0x0000)) {
+ continue;
+ }
+ dump_pci_device(dev);
+ }
+}
diff --git a/src/mainboard/bitworks/ims/failover.c b/src/mainboard/bitworks/ims/failover.c
new file mode 100644
index 0000000000..bdcb9eaed2
--- /dev/null
+++ b/src/mainboard/bitworks/ims/failover.c
@@ -0,0 +1,32 @@
+#define ASSEMBLY 1
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include "arch/romcc_io.h"
+#include "pc80/mc146818rtc_early.c"
+
+static unsigned long main(unsigned long bist)
+{
+ /* This is the primary cpu how should I boot? */
+ if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
+ normal_image:
+ asm volatile ("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist) /* inputs */
+ : /* clobbers */
+ );
+ cpu_reset:
+ asm volatile ("jmp __cpu_reset"
+ : /* outputs */
+ : "a"(bist) /* inputs */
+ : /* clobbers */
+ );
+ fallback_image:
+ return bist;
+}
diff --git a/src/mainboard/bitworks/ims/irq_tables.c b/src/mainboard/bitworks/ims/irq_tables.c
new file mode 100644
index 0000000000..894c27dec5
--- /dev/null
+++ b/src/mainboard/bitworks/ims/irq_tables.c
@@ -0,0 +1,32 @@
+/* This file was generated by getpir.c, do not modify!
+ (but if you do, please run checkpir on it to verify)
+ Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+
+ Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+*/
+
+#include <arch/pirq_routing.h>
+
+const struct irq_routing_table intel_irq_routing_table = {
+ PIRQ_SIGNATURE, /* u32 signature */
+ PIRQ_VERSION, /* u16 version */
+ 32+16*5, /* there can be total 5 devices on the bus */
+ 0, /* Where the interrupt router lies (bus) */
+ 0x88, /* Where the interrupt router lies (dev) */
+ 0x1c20, /* IRQs devoted exclusively to PCI usage */
+ 0x1106, /* Vendor */
+ 0x8231, /* Device */
+ 0, /* Crap (miniport) */
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
+ 0x5e, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
+ {
+ /* 8231 ethernet */
+ {0,0x90, {{0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}}, 0x1, 0},
+ /* 8231 internal */
+ {0,0x88, {{0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}}, 0x2, 0},
+ /* PCI slot */
+ {0,0xa0, {{0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}, {0x2, 0xdeb8}}, 0, 0},
+ {0,0x50, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x3, 0},
+ {0,0x98, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x4, 0},
+ }
+};
diff --git a/src/mainboard/bitworks/ims/mainboard.c b/src/mainboard/bitworks/ims/mainboard.c
new file mode 100644
index 0000000000..28f46e700b
--- /dev/null
+++ b/src/mainboard/bitworks/ims/mainboard.c
@@ -0,0 +1,12 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <arch/io.h>
+#include "chip.h"
+
+struct chip_operations mainboard_bitworks_ims_ops = {
+ CHIP_NAME("Bitworks IMS mainboard ")
+};
+
diff --git a/src/mainboard/bitworks/ims/reset.c b/src/mainboard/bitworks/ims/reset.c
new file mode 100644
index 0000000000..5796e17dc8
--- /dev/null
+++ b/src/mainboard/bitworks/ims/reset.c
@@ -0,0 +1,43 @@
+#if 0
+//#include "arch/romcc_io.h"
+#include <arch/io.h>
+
+typedef unsigned device_t;
+
+#define PCI_DEV(BUS, DEV, FN) ( \
+ (((BUS) & 0xFF) << 16) | \
+ (((DEV) & 0x1f) << 11) | \
+ (((FN) & 0x7) << 8))
+
+static void pci_write_config8(device_t dev, unsigned where, unsigned char value)
+{
+ unsigned addr;
+ addr = dev | where;
+ outl(0x80000000 | (addr & ~3), 0xCF8);
+ outb(value, 0xCFC + (addr & 3));
+}
+
+static void pci_write_config32(device_t dev, unsigned where, unsigned value)
+{
+ unsigned addr;
+ addr = dev | where;
+ outl(0x80000000 | (addr & ~3), 0xCF8);
+ outl(value, 0xCFC);
+}
+
+static unsigned pci_read_config32(device_t dev, unsigned where)
+{
+ unsigned addr;
+ addr = dev | where;
+ outl(0x80000000 | (addr & ~3), 0xCF8);
+ return inl(0xCFC);
+}
+
+#include "../../../northbridge/amd/amdk8/reset_test.c"
+
+void hard_reset(void)
+{
+ set_bios_reset();
+ pci_write_config8(PCI_DEV(1, 0x04, 0), 0x47, 1);
+}
+#endif
diff --git a/src/northbridge/intel/i440bx/Config.lb b/src/northbridge/intel/i440bx/Config.lb
new file mode 100644
index 0000000000..4a0c2c8658
--- /dev/null
+++ b/src/northbridge/intel/i440bx/Config.lb
@@ -0,0 +1,2 @@
+config chip.h
+object northbridge.o
diff --git a/src/northbridge/intel/i440bx/chip.h b/src/northbridge/intel/i440bx/chip.h
new file mode 100644
index 0000000000..b0b3b72b4a
--- /dev/null
+++ b/src/northbridge/intel/i440bx/chip.h
@@ -0,0 +1,5 @@
+struct northbridge_intel_i440bx_config
+{
+};
+
+extern struct chip_operations northbridge_intel_i440bx_ops;
diff --git a/src/northbridge/intel/i440bx/northbridge.c b/src/northbridge/intel/i440bx/northbridge.c
new file mode 100644
index 0000000000..ed262c24b7
--- /dev/null
+++ b/src/northbridge/intel/i440bx/northbridge.c
@@ -0,0 +1,186 @@
+#include <console/console.h>
+#include <arch/io.h>
+#include <stdint.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <stdlib.h>
+#include <string.h>
+#include <bitops.h>
+#include "chip.h"
+#include "northbridge.h"
+
+/*
+*/
+static void northbridge_init(device_t dev)
+{
+ printk_spew("Northbridge Init\n");
+}
+
+
+static struct device_operations northbridge_operations = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = northbridge_init,
+ .enable = 0,
+ .ops_pci = 0,
+};
+
+static struct pci_driver northbridge_driver __pci_driver = {
+ .ops = &northbridge_operations,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x7190,
+};
+
+
+
+#define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM)
+
+static void pci_domain_read_resources(device_t dev)
+{
+ struct resource *resource;
+
+ /* Initialize the system wide io space constraints */
+ resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0,0));
+ resource->limit = 0xffffUL;
+ resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+
+ /* Initialize the system wide memory resources constraints */
+ resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1,0));
+ resource->limit = 0xffffffffULL;
+ resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+}
+
+static void ram_resource(device_t dev, unsigned long index,
+ unsigned long basek, unsigned long sizek)
+{
+ struct resource *resource;
+
+ if (!sizek) {
+ return;
+ }
+ resource = new_resource(dev, index);
+ resource->base = ((resource_t)basek) << 10;
+ resource->size = ((resource_t)sizek) << 10;
+ resource->flags = IORESOURCE_MEM | IORESOURCE_CACHEABLE | \
+ IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
+}
+
+static void tolm_test(void *gp, struct device *dev, struct resource *new)
+{
+ struct resource **best_p = gp;
+ struct resource *best;
+ best = *best_p;
+ if (!best || (best->base > new->base)) {
+ best = new;
+ }
+ *best_p = best;
+}
+
+static uint32_t find_pci_tolm(struct bus *bus)
+{
+ struct resource *min;
+ uint32_t tolm;
+ min = 0;
+ search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min);
+ tolm = 0xffffffffUL;
+ if (min && tolm > min->base) {
+ tolm = min->base;
+ }
+ return tolm;
+}
+
+static void pci_domain_set_resources(device_t dev)
+{
+ static const uint8_t ramregs[] = {
+ 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, 0x56, 0x57
+ };
+ device_t mc_dev;
+ uint32_t pci_tolm;
+
+ pci_tolm = find_pci_tolm(&dev->link[0]);
+ mc_dev = dev->link[0].children;
+ if (mc_dev) {
+ unsigned long tomk, tolmk;
+ unsigned char rambits;
+ int i, idx;
+
+ for(rambits = 0, i = 0; i < sizeof(ramregs)/sizeof(ramregs[0]); i++) {
+ unsigned char reg;
+ reg = pci_read_config8(mc_dev, ramregs[i]);
+ /* these are ENDING addresses, not sizes.
+ * if there is memory in this slot, then reg will be > rambits.
+ * So we just take the max, that gives us total.
+ * We take the highest one to cover for once and future linuxbios
+ * bugs. We warn about bugs.
+ */
+ if (reg > rambits)
+ rambits = reg;
+ if (reg < rambits)
+ printk_err("ERROR! register 0x%x is not set!\n",
+ ramregs[i]);
+ }
+ printk_debug("I would set ram size to 0x%x Kbytes\n", (rambits)*8*1024);
+ tomk = rambits*8*1024;
+ /* Compute the top of Low memory */
+ tolmk = pci_tolm >> 10;
+ if (tolmk >= tomk) {
+ /* The PCI hole does does not overlap the memory.
+ */
+ tolmk = tomk;
+ }
+ /* Report the memory regions */
+ idx = 10;
+ ram_resource(dev, idx++, 0, tolmk);
+ }
+ assign_resources(&dev->link[0]);
+}
+
+static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max)
+{
+ max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max);
+ return max;
+}
+
+static struct device_operations pci_domain_ops = {
+ .read_resources = pci_domain_read_resources,
+ .set_resources = pci_domain_set_resources,
+ .enable_resources = enable_childrens_resources,
+ .init = 0,
+ .scan_bus = pci_domain_scan_bus,
+};
+
+static void cpu_bus_init(device_t dev)
+{
+ initialize_cpus(&dev->link[0]);
+}
+
+static void cpu_bus_noop(device_t dev)
+{
+}
+
+static struct device_operations cpu_bus_ops = {
+ .read_resources = cpu_bus_noop,
+ .set_resources = cpu_bus_noop,
+ .enable_resources = cpu_bus_noop,
+ .init = cpu_bus_init,
+ .scan_bus = 0,
+};
+
+static void enable_dev(struct device *dev)
+{
+ /* Set the operations if it is a special bus type */
+ if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) {
+ dev->ops = &pci_domain_ops;
+ pci_set_method(dev);
+ }
+ else if (dev->path.type == DEVICE_PATH_APIC_CLUSTER) {
+ dev->ops = &cpu_bus_ops;
+ }
+}
+
+struct chip_operations northbridge_intel_i440bx_ops = {
+ CHIP_NAME("Intel 440bx Northbridge")
+ .enable_dev = enable_dev,
+};
diff --git a/src/northbridge/intel/i440bx/northbridge.h b/src/northbridge/intel/i440bx/northbridge.h
new file mode 100644
index 0000000000..3e569bb31b
--- /dev/null
+++ b/src/northbridge/intel/i440bx/northbridge.h
@@ -0,0 +1,6 @@
+#ifndef NORTHBRIDGE_INTEL_440BX_H
+#define NORTHBRIDGE_INTEL_440BX_H
+
+extern unsigned int i440bx_scan_root_bus(device_t root, unsigned int max);
+
+#endif /* NORTHBRIDGE_INTEL_440BX_H */
diff --git a/src/northbridge/intel/i440bx/raminit.c b/src/northbridge/intel/i440bx/raminit.c
new file mode 100644
index 0000000000..737f2bf458
--- /dev/null
+++ b/src/northbridge/intel/i440bx/raminit.c
@@ -0,0 +1,399 @@
+#include <cpu/x86/mtrr.h>
+#include "raminit.h"
+
+/*
+This software and ancillary information (herein called SOFTWARE )
+called LinuxBIOS is made available under the terms described
+here. The SOFTWARE has been approved for release with associated
+LA-CC Number 00-34 . Unless otherwise indicated, this SOFTWARE has
+been authored by an employee or employees of the University of
+California, operator of the Los Alamos National Laboratory under
+Contract No. W-7405-ENG-36 with the U.S. Department of Energy. The
+U.S. Government has rights to use, reproduce, and distribute this
+SOFTWARE. The public may copy, distribute, prepare derivative works
+and publicly display this SOFTWARE without charge, provided that this
+Notice and any statement of authorship are reproduced on all copies.
+Neither the Government nor the University makes any warranty, express
+or implied, or assumes any liability or responsibility for the use of
+this SOFTWARE. If SOFTWARE is modified to produce derivative works,
+such modified SOFTWARE should be clearly marked, so as not to confuse
+it with the version available from LANL.
+ */
+/* Copyright 2000, Ron Minnich, Advanced Computing Lab, LANL
+ * rminnich@lanl.gov
+ */
+/*
+ * 11/26/02 - kevinh@ispiri.com - The existing comments implied that
+ * this didn't work yet. Therefore, I've updated it so that it works
+ * correctly - at least on my VIA epia motherboard. 64MB DIMM in slot 0.
+ */
+
+/* Added automatic detection of first equipped bank and its MA mapping type.
+ * (Rest of configuration is done in C)
+ * 5/19/03 by SONE Takeshi <ts1@tsn.or.jp>
+ */
+/* converted to C 9/2003 Ron Minnich */
+
+/* Modified for the i440bx Richard Smith 01/2005 */
+
+/* Set to 1 if your DIMMs are PC133 Note that I'm assuming CPU's FSB
+ * frequency is 133MHz. If your CPU runs at another bus speed, you
+ * might need to change some of register values.
+ */
+#ifndef DIMM_PC133
+#define DIMM_PC133 0
+#endif
+
+// Set to 1 if your DIMMs are CL=2
+#ifndef DIMM_CL2
+#define DIMM_CL2 0
+#endif
+
+void dimms_read(unsigned long x)
+{
+ uint8_t c;
+ unsigned long eax;
+ volatile unsigned long y;
+ eax = x;
+ for(c = 0; c < 6; c++) {
+ y = * (volatile unsigned long *) eax;
+ eax += 0x10000000;
+ }
+}
+
+void dimms_write(int x)
+{
+ uint8_t c;
+ unsigned long eax = x;
+ for(c = 0; c < 6; c++) {
+ *(volatile unsigned long *) eax = 0;
+ eax += 0x10000000;
+ }
+}
+
+
+
+#ifdef DEBUG_SETNORTHB
+void setnorthb(device_t north, uint8_t reg, uint8_t val)
+{
+ print_debug("setnorth: reg ");
+ print_debug_hex8(reg);
+ print_debug(" to ");
+ print_debug_hex8(val);
+ print_debug("\r\n");
+ pci_write_config8(north, reg, val);
+}
+#else
+#define setnorthb pci_write_config8
+#endif
+
+void
+dumpnorth(device_t north)
+{
+ unsigned int r, c;
+ for(r = 0; ; r += 16) {
+ print_debug_hex8(r);
+ print_debug(":");
+ for(c = 0; c < 16; c++) {
+ print_debug_hex8(pci_read_config8(north, r+c));
+ print_debug(" ");
+ }
+ print_debug("\r\n");
+ if (r >= 240)
+ break;
+ }
+}
+
+static void sdram_set_registers(const struct mem_controller *ctrl)
+{
+ device_t north = (device_t) 0;
+ uint8_t c, r;
+
+ print_err("vt8601 init starting\r\n");
+ north = pci_locate_device(PCI_ID(0x1106, 0x8601), 0);
+ north = 0;
+ print_debug_hex32(north);
+ print_debug(" is the north\n");
+ print_debug_hex16(pci_read_config16(north, 0));
+ print_debug(" ");
+ print_debug_hex16(pci_read_config16(north, 2));
+ print_debug("\r\n");
+
+ /* All we are doing now is setting initial known-good values that will
+ * be revised later as we read SPD
+ */
+ // memory clk enable. We are not using ECC
+ pci_write_config8(north,0x78, 0x01);
+ print_debug_hex8(pci_read_config8(north, 0x78));
+ // dram control, see the book.
+#if DIMM_PC133
+ pci_write_config8(north,0x68, 0x52);
+#else
+ pci_write_config8(north,0x68, 0x42);
+#endif
+ // dram control, see the book.
+ pci_write_config8(north,0x6B, 0x0c);
+ // Initial setting, 256MB in each bank, will be rewritten later.
+ pci_write_config8(north,0x5A, 0x20);
+ print_debug_hex8(pci_read_config8(north, 0x5a));
+ pci_write_config8(north,0x5B, 0x40);
+ pci_write_config8(north,0x5C, 0x60);
+ pci_write_config8(north,0x5D, 0x80);
+ pci_write_config8(north,0x5E, 0xA0);
+ pci_write_config8(north,0x5F, 0xC0);
+ // It seems we have to take care of these 2 registers as if
+ // they are bank 6 and 7.
+ pci_write_config8(north,0x56, 0xC0);
+ pci_write_config8(north,0x57, 0xC0);
+
+ // SDRAM in all banks
+ pci_write_config8(north,0x60, 0x3F);
+ // DRAM timing. I'm suspicious of this
+ // This is for all banks, 64 is 0,1. 65 is 2,3. 66 is 4,5.
+ // ras precharge 4T, RAS pulse 5T
+ // cas2 is 0xd6, cas3 is 0xe6
+ // we're also backing off write pulse width to 2T, so result is 0xee
+#if DIMM_CL2
+ pci_write_config8(north,0x64, 0xd4);
+ pci_write_config8(north,0x65, 0xd4);
+ pci_write_config8(north,0x66, 0xd4);
+#else // CL=3
+ pci_write_config8(north,0x64, 0xe4);
+ pci_write_config8(north,0x65, 0xe4);
+ pci_write_config8(north,0x66, 0xe4);
+#endif
+
+ // dram frequency select.
+ // enable 4K pages for 64M dram.
+#if DIMM_PC133
+ pci_write_config8(north,0x69, 0x3c);
+#else
+ pci_write_config8(north,0x69, 0xac);
+#endif
+
+ /* IMPORTANT -- disable refresh counter */
+ // refresh counter, disabled.
+ pci_write_config8(north,0x6A, 0x00);
+
+
+ // clkenable configuration. kevinh FIXME - add precharge
+ pci_write_config8(north,0x6C, 0x00);
+ // dram read latch delay of 1 ns, MD drive 8 mA,
+ // high drive strength on MA[2: 13], we#, cas#, ras#
+ // As per Cindy Lee, set to 0x37, not 0x57
+ pci_write_config8(north,0x6D, 0x7f);
+}
+
+/* slot is the dram slot. Return size of side0 in lower 16-bit,
+ * side1 in upper 16-bit, in units of 8MB */
+static unsigned long
+spd_module_size(unsigned char slot)
+{
+ /* for all the DRAMS, see if they are there and get the size of each
+ * module. This is just a very early first cut at sizing.
+ */
+ /* we may run out of registers ... */
+ unsigned int banks, rows, cols, reg;
+ unsigned int value = 0;
+ /* unsigned int module = ((0x50 + slot) << 1) + 1; */
+ unsigned int module = 0x50 + slot;
+ /* is the module there? if byte 2 is not 4, then we'll assume it
+ * is useless.
+ */
+ print_info("Slot ");
+ print_info_hex8(slot);
+ if (smbus_read_byte(module, 2) != 4) {
+ print_info(" is empty\r\n");
+ return 0;
+ }
+ print_info(" is SDRAM ");
+
+ banks = smbus_read_byte(module, 17);
+ /* we're going to assume symmetric banks. Sorry. */
+ cols = smbus_read_byte(module, 4) & 0xf;
+ rows = smbus_read_byte(module, 3) & 0xf;
+ /* grand total. You have rows+cols addressing, * times of banks, times
+ * width of data in bytes */
+ /* Width is assumed to be 64 bits == 8 bytes */
+ value = (1 << (cols + rows)) * banks * 8;
+ print_info_hex32(value);
+ print_info(" bytes ");
+ /* Return in 8MB units */
+ value >>= 23;
+
+ /* We should have single or double side */
+ if (smbus_read_byte(module, 5) == 2) {
+ print_info("x2");
+ value = (value << 16) | value;
+ }
+ print_info("\r\n");
+ return value;
+
+}
+
+static int
+spd_num_chips(unsigned char slot)
+{
+/* unsigned int module = ((0x50 + slot) << 1) + 1; */
+ unsigned int module = 0x50 + slot;
+ unsigned int width;
+
+ width = smbus_read_byte(module, 13);
+ if (width == 0)
+ width = 8;
+ return 64 / width;
+}
+
+static void sdram_set_spd_registers(const struct mem_controller *ctrl)
+{
+#define T133 7
+ unsigned char Trp = 1, Tras = 1, casl = 2, val;
+ unsigned char timing = 0xe4;
+ /* read Trp */
+ val = smbus_read_byte(0x50, 27);
+ if (val < 2*T133)
+ Trp = 1;
+ val = smbus_read_byte(0x50, 30);
+ if (val < 5*T133)
+ Tras = 0;
+ val = smbus_read_byte(0x50, 18);
+ if (val < 8)
+ casl = 1;
+ if (val < 4)
+ casl = 0;
+
+ val = (Trp << 7) | (Tras << 6) | (casl << 4) | 4;
+
+ print_debug_hex8(val); print_debug(" is the computed timing\n");
+ /* don't set it. Experience shows that this screwy chipset should just
+ * be run with the most conservative timing.
+ * pci_write_config8(0, 0x64, val);
+ */
+}
+
+static void set_ma_mapping(device_t north, int slot, int type)
+{
+ unsigned char reg, val;
+ int shift;
+
+ reg = 0x58 + slot/2;
+ if (slot%2 >= 1)
+ shift = 0;
+ else
+ shift = 4;
+
+ val = pci_read_config8(north, reg);
+ val &= ~(0xf << shift);
+ val |= type << shift;
+ pci_write_config8(north, reg, val);
+}
+
+
+static void sdram_enable(int controllers, const struct mem_controller *ctrl)
+{
+ unsigned char i;
+ static const uint8_t ramregs[] = {
+ 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, 0x56, 0x57
+ };
+ device_t north = 0;
+ uint32_t size, base, slot, ma;
+ /* begin to initialize*/
+ // I forget why we need this, but we do
+ dimms_write(0xa55a5aa5);
+
+ /* set NOP*/
+ pci_write_config8(north,0x6C, 0x01);
+ print_debug("NOP\r\n");
+ /* wait 200us*/
+ // You need to do the memory reference. That causes the nop cycle.
+ dimms_read(0);
+ udelay(400);
+ print_debug("PRECHARGE\r\n");
+ /* set precharge */
+ pci_write_config8(north,0x6C, 0x02);
+ print_debug("DUMMY READS\r\n");
+ /* dummy reads*/
+ dimms_read(0);
+ udelay(200);
+ print_debug("CBR\r\n");
+ /* set CBR*/
+ pci_write_config8(north,0x6C, 0x04);
+
+ /* do 8 reads and wait >100us between each - from via*/
+ dimms_read(0);
+ udelay(200);
+ dimms_read(0);
+ udelay(200);
+ dimms_read(0);
+ udelay(200);
+ dimms_read(0);
+ udelay(200);
+ dimms_read(0);
+ udelay(200);
+ dimms_read(0);
+ udelay(200);
+ dimms_read(0);
+ udelay(200);
+ dimms_read(0);
+ udelay(200);
+ print_debug("MRS\r\n");
+ /* set MRS*/
+ pci_write_config8(north,0x6c, 0x03);
+#if DIMM_CL2
+ dimms_read(0x150);
+#else // CL=3
+ dimms_read(0x1d0);
+#endif
+ udelay(200);
+ print_debug("NORMAL\r\n");
+ /* set to normal mode */
+ pci_write_config8(north,0x6C, 0x08);
+
+ dimms_write(0x55aa55aa);
+ dimms_read(0);
+ udelay(200);
+ print_debug("set ref. rate\r\n");
+ // Set the refresh rate.
+#if DIMM_PC133
+ pci_write_config8(north,0x6A, 0x86);
+#else
+ pci_write_config8(north,0x6A, 0x65);
+#endif
+ print_debug("enable multi-page open\r\n");
+ // enable multi-page open
+ pci_write_config8(north,0x6B, 0x0d);
+
+ base = 0;
+ for(slot = 0; slot < 4; slot++) {
+ size = spd_module_size(slot);
+ /* side 0 */
+ base += size & 0xffff;
+ pci_write_config8(north, ramregs[2*slot], base);
+ /* side 1 */
+ base += size >> 16;
+ if (base > 0xff)
+ base = 0xff;
+ pci_write_config8(north, ramregs[2*slot + 1], base);
+
+ if (!size)
+ continue;
+
+ /* Calculate the value of MA mapping type register,
+ * based on size of SDRAM chips. */
+ size = (size & 0xffff) << (3 + 3);
+ /* convert module size to be in Mbits */
+ size /= spd_num_chips(slot);
+ print_debug_hex16(size);
+ print_debug(" is the chip size\r\n");
+ if (size < 64)
+ ma = 0;
+ if (size < 256)
+ ma = 8;
+ else
+ ma = 0xe;
+ print_debug_hex16(ma);
+ print_debug(" is the MA type\r\n");
+ set_ma_mapping(north, slot, ma);
+ }
+ print_err("vt8601 done\r\n");
+}
diff --git a/src/northbridge/intel/i440bx/raminit.h b/src/northbridge/intel/i440bx/raminit.h
new file mode 100644
index 0000000000..6e40683066
--- /dev/null
+++ b/src/northbridge/intel/i440bx/raminit.h
@@ -0,0 +1,11 @@
+#ifndef RAMINIT_H
+#define RAMINIT_H
+
+#define DIMM_SOCKETS 4
+struct mem_controller {
+ device_t d0;
+ uint16_t channel0[DIMM_SOCKETS];
+};
+
+
+#endif /* RAMINIT_H */
diff --git a/src/southbridge/intel/i440bx/chip.h b/src/southbridge/intel/i440bx/chip.h
new file mode 100644
index 0000000000..5952e38582
--- /dev/null
+++ b/src/southbridge/intel/i440bx/chip.h
@@ -0,0 +1,13 @@
+#ifndef I440BX_CHIP_H
+#define I440BX_CHIP_H
+
+struct southbridge_intel_i440bx_config
+{
+ unsigned int ide0_enable : 1;
+ unsigned int ide1_enable : 1;
+};
+
+struct chip_operations;
+extern struct chip_operations southbridge_intel_i440bx_ops;
+
+#endif /* I440BX_CHIP_H */
diff --git a/src/southbridge/intel/i440bx/i440bx_early_smbus.c b/src/southbridge/intel/i440bx/i440bx_early_smbus.c
new file mode 100644
index 0000000000..a3db7b88c0
--- /dev/null
+++ b/src/southbridge/intel/i440bx/i440bx_early_smbus.c
@@ -0,0 +1,45 @@
+#include "i440bx_smbus.h"
+
+#define SMBUS_IO_BASE 0x0f00
+
+static void enable_smbus(void)
+{
+ device_t dev;
+ dev = pci_locate_device(PCI_ID(0x8086, 0x7113), 0);
+ if (dev == PCI_DEV_INVALID) {
+ die("SMBUS controller not found\r\n");
+ }
+ uint8_t enable;
+ print_spew("SMBus controller enabled\r\n");
+ pci_write_config32(dev, 0x90, SMBUS_IO_BASE );
+ // Enable and set SMBBus
+ // 0x01 Interrupt to SMI#
+ // (0x4<<1)|1 set interrupt to IRQ9
+ pci_write_config8(dev, 0xd2, (0x4<<1)|1);
+
+ // Enable the IO space
+ pci_write_config16(dev, 0x04, 1);
+
+ /* clear any lingering errors, so the transaction will run */
+ outb(0x1e, SMBUS_IO_BASE + SMBGSTATUS);
+}
+
+static int smbus_recv_byte(unsigned device)
+{
+ return do_smbus_recv_byte(SMBUS_IO_BASE, device);
+}
+
+static int smbus_send_byte(unsigned device, unsigned char val)
+{
+ return do_smbus_send_byte(SMBUS_IO_BASE, device, val);
+}
+
+static int smbus_read_byte(unsigned device, unsigned address)
+{
+ return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
+}
+
+static int smbus_write_byte(unsigned device, unsigned address, unsigned char val)
+{
+ return do_smbus_write_byte(SMBUS_IO_BASE, device, address, val);
+}
diff --git a/src/southbridge/intel/i440bx/i440bx_smbus.c b/src/southbridge/intel/i440bx/i440bx_smbus.c
new file mode 100644
index 0000000000..9609e357c1
--- /dev/null
+++ b/src/southbridge/intel/i440bx/i440bx_smbus.c
@@ -0,0 +1,43 @@
+/*
+ * (C) 2004 Linux Networx
+ * (C) 2005 Bitworks
+*/
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include <device/smbus.h>
+#include <arch/io.h>
+#include "i440bx.h"
+
+
+static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ pci_write_config32(dev, 0x44,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+}
+
+static struct smbus_bus_operations lops_smbus_bus = {
+};
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = lpci_set_subsystem,
+};
+static struct device_operations smbus_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = 0,
+ .scan_bus = scan_static_bus,
+ .enable = i440bx_enable,
+ .ops_pci = &lops_pci,
+ .ops_smbus_bus = &lops_smbus_bus,
+};
+
+static struct pci_driver smbus_driver __pci_driver = {
+ .ops = &smbus_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_INTEL_440BX_SMB,
+};
diff --git a/src/southbridge/intel/i440bx/i440bx_smbus.h b/src/southbridge/intel/i440bx/i440bx_smbus.h
new file mode 100644
index 0000000000..9a100c0f8b
--- /dev/null
+++ b/src/southbridge/intel/i440bx/i440bx_smbus.h
@@ -0,0 +1,230 @@
+#include <device/smbus_def.h>
+
+#define SMBGSTATUS 0x0
+#define SMBGCTL 0x2
+#define SMBHSTCMD 0x3
+#define SMBHSTADDR 0x4
+#define SMBHSTDAT 0x5
+
+#define SMBUS_TIMEOUT (100*1000*10)
+#define SMBUS_STATUS_MASK 0x1e
+
+static inline void smbus_delay(void)
+{
+ outb(0x80, 0x80);
+ outb(0x80, 0x80);
+ outb(0x80, 0x80);
+ outb(0x80, 0x80);
+ outb(0x80, 0x80);
+ outb(0x80, 0x80);
+}
+
+static int smbus_wait_until_ready(unsigned smbus_io_base)
+{
+ unsigned long loops;
+ loops = SMBUS_TIMEOUT;
+ do {
+ unsigned char val;
+ smbus_delay();
+ val = inb(smbus_io_base + SMBGSTATUS);
+ if ((val & 0x1) == 0) {
+ break;
+ }
+ if(loops == (SMBUS_TIMEOUT / 2)) {
+ outw(inw(smbus_io_base + SMBGSTATUS),
+ smbus_io_base + SMBGSTATUS);
+ }
+ } while(--loops);
+ return loops?0:SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+}
+
+static int smbus_wait_until_done(unsigned smbus_io_base)
+{
+ unsigned long loops;
+ loops = SMBUS_TIMEOUT;
+ do {
+ unsigned short val;
+ smbus_delay();
+
+ val = inb(smbus_io_base + SMBGSTATUS);
+ // Make sure the command is done
+ if ((val & 0x1) != 0) {
+ continue;
+ }
+ // Don't break out until one of the interrupt
+ // flags is set.
+ if (val & 0xfe) {
+ break;
+ }
+ } while(--loops);
+ return loops?0:SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+}
+
+static int do_smbus_recv_byte(unsigned smbus_io_base, unsigned device)
+{
+ unsigned global_status_register;
+ unsigned byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+ }
+
+ /* setup transaction */
+ /* disable interrupts */
+ outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL);
+ /* set the device I'm talking too */
+ outw(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+ /* set the command/address... */
+ outb(0, smbus_io_base + SMBHSTCMD);
+ /* set up for a send byte */
+ outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x1), smbus_io_base + SMBGCTL);
+
+ /* clear any lingering errors, so the transaction will run */
+ /* Do I need to write the bits to a 1 to clear an error? */
+ outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS);
+
+ /* set the data word...*/
+ outw(0, smbus_io_base + SMBHSTDAT);
+
+ /* start the command */
+ outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL);
+
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+ }
+
+ global_status_register = inw(smbus_io_base + SMBGSTATUS);
+
+ /* read results of transaction */
+ byte = inb(smbus_io_base + SMBHSTDAT) & 0xff;
+
+ // Check for any result other than a command completion
+ if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 1)) {
+ return SMBUS_ERROR;
+ }
+ return byte;
+}
+
+static int do_smbus_send_byte(unsigned smbus_io_base, unsigned device, unsigned value)
+{
+ unsigned global_status_register;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+ }
+
+ /* setup transaction */
+ /* disable interrupts */
+ outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL);
+ /* set the device I'm talking too */
+ outw(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+ /* set the command/address... */
+ outb(0, smbus_io_base + SMBHSTCMD);
+ /* set up for a send byte */
+ outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x1), smbus_io_base + SMBGCTL);
+
+ /* clear any lingering errors, so the transaction will run */
+ /* Do I need to write the bits to a 1 to clear an error? */
+ outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS);
+
+ /* set the data word...*/
+ outw(value, smbus_io_base + SMBHSTDAT);
+
+ /* start the command */
+ outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL);
+
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+ }
+ global_status_register = inw(smbus_io_base + SMBGSTATUS);
+
+ if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 4)) {
+ return SMBUS_ERROR;
+ }
+ return 0;
+}
+
+
+static int do_smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned address)
+{
+ unsigned global_status_register;
+ unsigned byte;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+ }
+
+ /* setup transaction */
+
+ /* clear any lingering errors, so the transaction will run */
+ outb(0x1e, smbus_io_base + SMBGSTATUS);
+
+ /* set the device I'm talking too */
+ outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+ /* set the command/address... */
+ outb(address & 0xFF, smbus_io_base + SMBHSTCMD);
+
+ /* clear the data word...*/
+ outb(0, smbus_io_base + SMBHSTDAT);
+
+ /* start a byte read with interrupts disabled */
+ outb( (0x02 << 2)|(1<<6), smbus_io_base + SMBGCTL);
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+ }
+
+ global_status_register = inw(smbus_io_base + SMBGSTATUS);
+
+ /* read results of transaction */
+ byte = inw(smbus_io_base + SMBHSTDAT) & 0xff;
+
+ if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 4)) {
+ return SMBUS_ERROR;
+ }
+ return byte;
+}
+
+static int do_smbus_write_byte(unsigned smbus_io_base, unsigned device, unsigned address, unsigned char val)
+{
+ unsigned global_status_register;
+
+ if (smbus_wait_until_ready(smbus_io_base) < 0) {
+ return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+ }
+
+ /* setup transaction */
+ /* disable interrupts */
+ outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL);
+ /* set the device I'm talking too */
+ outw(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+ outb(address & 0xFF, smbus_io_base + SMBHSTCMD);
+ /* set up for a byte data write */ /* FIXME */
+ outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x2), smbus_io_base + SMBGCTL);
+ /* clear any lingering errors, so the transaction will run */
+ /* Do I need to write the bits to a 1 to clear an error? */
+ outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS);
+
+ /* write the data word...*/
+ outw(val, smbus_io_base + SMBHSTDAT);
+
+ /* start the command */
+ outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL);
+
+ /* poll for transaction completion */
+ if (smbus_wait_until_done(smbus_io_base) < 0) {
+ return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+ }
+ global_status_register = inw(smbus_io_base + SMBGSTATUS);
+
+ if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 4)) {
+ return SMBUS_ERROR;
+ }
+ return 0;
+}
+
diff --git a/src/superio/NSC/pc87351/Config.lb b/src/superio/NSC/pc87351/Config.lb
new file mode 100644
index 0000000000..f62a567d61
--- /dev/null
+++ b/src/superio/NSC/pc87351/Config.lb
@@ -0,0 +1,2 @@
+config chip.h
+object superio.o
diff --git a/src/superio/NSC/pc87351/chip.h b/src/superio/NSC/pc87351/chip.h
new file mode 100644
index 0000000000..6b62c5493d
--- /dev/null
+++ b/src/superio/NSC/pc87351/chip.h
@@ -0,0 +1,17 @@
+#ifndef SIO_COM1
+#define SIO_COM1_BASE 0x3F8
+#endif
+#ifndef SIO_COM2
+#define SIO_COM2_BASE 0x2F8
+#endif
+
+struct chip_operations;
+extern struct chip_operations superio_NSC_pc87351_ops;
+
+#include <pc80/keyboard.h>
+#include <uart8250.h>
+
+struct superio_NSC_pc87351_config {
+ struct uart8250 com1, com2;
+ struct pc_keyboard keyboard;
+};
diff --git a/src/superio/NSC/pc87351/pc87351.h b/src/superio/NSC/pc87351/pc87351.h
new file mode 100644
index 0000000000..dbed582bce
--- /dev/null
+++ b/src/superio/NSC/pc87351/pc87351.h
@@ -0,0 +1,9 @@
+#define PC87351_FDC 0x00 /* Floppy */
+#define PC87351_PP 0x01 /* Parallel port */
+#define PC87351_SP2 0x02 /* Com2 */
+#define PC87351_SP1 0x03 /* Com1 */
+#define PC87351_SWC 0x04 /* System wakeup control */
+#define PC87351_KBCM 0x05 /* Mouse */
+#define PC87351_KBCK 0x06 /* Keyboard */
+#define PC87351_GPIO 0x07 /* General purpose IO */
+#define PC87351_FSD 0x08 /* Fan speed device */
diff --git a/src/superio/NSC/pc87351/pc87351_early_serial.c b/src/superio/NSC/pc87351/pc87351_early_serial.c
new file mode 100644
index 0000000000..7ec361e853
--- /dev/null
+++ b/src/superio/NSC/pc87351/pc87351_early_serial.c
@@ -0,0 +1,10 @@
+#include <arch/romcc_io.h>
+#include "pc87351.h"
+
+static void pc87351_enable_serial(device_t dev, unsigned iobase)
+{
+ pnp_set_logical_device(dev);
+ pnp_set_enable(dev, 0);
+ pnp_set_iobase(dev, PNP_IDX_IO0, iobase);
+ pnp_set_enable(dev, 1);
+}
diff --git a/src/superio/NSC/pc87351/superio.c b/src/superio/NSC/pc87351/superio.c
new file mode 100644
index 0000000000..a106d3a947
--- /dev/null
+++ b/src/superio/NSC/pc87351/superio.c
@@ -0,0 +1,80 @@
+/* Copyright 2000 AG Electronics Ltd. */
+/* Copyright 2003-2004 Linux Networx */
+/* This code is distributed without warranty under the GPL v2 (see COPYING) */
+
+/*
+ * Richard A Smith
+ * I derived this code from the pc87360 device and removed the stuff the 87351
+ * dosen't do.
+*/
+
+#include <arch/io.h>
+#include <device/device.h>
+#include <device/pnp.h>
+#include <console/console.h>
+#include <string.h>
+#include <bitops.h>
+#include <uart8250.h>
+#include <pc80/keyboard.h>
+#include "chip.h"
+#include "pc87351.h"
+
+static void init(device_t dev)
+{
+ struct superio_NSC_pc87351_config *conf;
+ struct resource *res0, *res1;
+ /* Wishlist handle well known programming interfaces more
+ * generically.
+ */
+ if (!dev->enabled) {
+ return;
+ }
+ conf = dev->chip_info;
+ switch(dev->path.u.pnp.device) {
+ case PC87351_SP1:
+ res0 = find_resource(dev, PNP_IDX_IO0);
+ init_uart8250(res0->base, &conf->com1);
+ break;
+ case PC87351_SP2:
+ res0 = find_resource(dev, PNP_IDX_IO0);
+ init_uart8250(res0->base, &conf->com2);
+ break;
+ case PC87351_KBCK:
+ res0 = find_resource(dev, PNP_IDX_IO0);
+ res1 = find_resource(dev, PNP_IDX_IO1);
+ init_pc_keyboard(res0->base, res1->base, &conf->keyboard);
+ break;
+ }
+}
+
+static struct device_operations ops = {
+ .read_resources = pnp_read_resources,
+ .set_resources = pnp_set_resources,
+ .enable_resources = pnp_enable_resources,
+ .enable = pnp_enable,
+ .init = init,
+};
+
+static struct pnp_info pnp_dev_info[] = {
+ { &ops, PC87351_FDC, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07fa, 0}, },
+ { &ops, PC87351_PP, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x04f8, 0}, },
+ { &ops, PC87351_SP2, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0 | PNP_DRQ1, { 0x7f8, 0 }, },
+ { &ops, PC87351_SP1, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, },
+ { &ops, PC87351_SWC, PNP_IO0 | PNP_IRQ0, { 0xfff0, 0 }, },
+ { &ops, PC87351_KBCM, PNP_IRQ0 },
+ { &ops, PC87351_KBCK, PNP_IO0 | PNP_IO1 | PNP_IRQ0, { 0x7f8, 0 }, { 0x7f8, 0x4}, },
+ { &ops, PC87351_GPIO, PNP_IO0 | PNP_IRQ0, { 0xfff8, 0 } },
+ { &ops, PC87351_FSD, PNP_IO0 | PNP_IRQ0, { 0xfff8, 0 } },
+};
+
+
+static void enable_dev(struct device *dev)
+{
+ pnp_enable_devices(dev, &pnp_ops,
+ sizeof(pnp_dev_info)/sizeof(pnp_dev_info[0]), pnp_dev_info);
+}
+
+struct chip_operations superio_NSC_pc87351_ops = {
+ CHIP_NAME("NSC 87351")
+ .enable_dev = enable_dev,
+};