summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorGreg Watson <jarrah@users.sourceforge.net>2004-06-04 22:46:30 +0000
committerGreg Watson <jarrah@users.sourceforge.net>2004-06-04 22:46:30 +0000
commit2f2e63bc7dd27b526d300a7aa712a0af4ec85e3e (patch)
treeaef4978a100d989fdb1ded4279b8b600657357f9 /src
parentc72e27616df506e2417e4e8a1a3efd1f198b3cf1 (diff)
downloadcoreboot-2f2e63bc7dd27b526d300a7aa712a0af4ec85e3e.tar.xz
BDI2000 config file
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1601 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
-rwxr-xr-xsrc/mainboard/embeddedplanet/ep405pc/ep405pc.cfg89
-rw-r--r--src/mainboard/motorola/sandpoint/sp7410.cfg139
-rw-r--r--src/mainboard/totalimpact/briq/briQ7400.cfg178
3 files changed, 406 insertions, 0 deletions
diff --git a/src/mainboard/embeddedplanet/ep405pc/ep405pc.cfg b/src/mainboard/embeddedplanet/ep405pc/ep405pc.cfg
new file mode 100755
index 0000000000..568efb8f6b
--- /dev/null
+++ b/src/mainboard/embeddedplanet/ep405pc/ep405pc.cfg
@@ -0,0 +1,89 @@
+; bdiGDB configuration file for the Embedded Planet EP405PC
+; ---------------------------------------------------------
+;
+[INIT]
+; init core register
+WSPR 954 0x00000000 ;DCWR: Disable data cache write-thru
+WSPR 1018 0x00000000 ;DCCR: Disable data cache
+WSPR 1019 0x00000000 ;ICCR: Disable instruction cache
+WSPR 981 0x00000000 ;EVPR: Exception Vector Table @0x00000000
+
+; Setup SDRAM Controller
+WDCR 16 0x00000080 ;Select SDRAM0_TR
+WDCR 17 0x010E8016 ;TR: SDRAM Timing Register
+WDCR 16 0x00000040 ;Select SDRAM0_B0CR
+WDCR 17 0x00084001 ;Select bank 0
+WDCR 16 0x00000030 ;Select SDRAM0_RTR
+WDCR 17 0x08080000 ;RTR: Refresh Timing Register
+WDCR 16 0x00000094 ;Select SDRAM0_ECCCFG
+WDCR 17 0x00000000 ;ECC: Disabled
+WDCR 16 0x00000034 ;Select SDRAM0_PMIT
+WDCR 17 0x0F000000 ;PMIT: Power Management Idle Timer
+DELAY 1 ;Wait for SDRAM powerup
+WDCR 16 0x00000020 ;Select SDRAM0_CFG
+WDCR 17 0x80C00000 ;CFG: Enable
+
+; MMU
+WM32 0xf0 0x00000000 ;invalidate page table base
+
+; EBC
+WDCR 0x12 0x00000004 ;Select EBC0_B4CR
+WDCR 0x13 0xF4058000 ;Set NVRTC/BCSR
+WDCR 0x12 0x00000014 ;Select EBC0_B4AP
+WDCR 0x13 0x04050000 ;Set NVRTC/BCSR timing
+WM8 0xF4000003 0x20 ;Enable UART0
+WM8 0xF4000009 0x07 ;LED
+DELAY 500
+WM8 0xF4000009 0x0b ;LED
+DELAY 500
+WM8 0xF4000009 0x0d ;LED
+DELAY 500
+WM8 0xF4000009 0x0e ;LED
+DELAY 500
+
+[TARGET]
+JTAGCLOCK 0 ;use 16 MHz JTAG clock
+CPUTYPE 405 ;the used target CPU type
+BDIMODE AGENT ;the BDI working mode (LOADONLY | AGENT)
+;WAKEUP 3000 ;wakeup time after reset
+BREAKMODE HARD ;SOFT or HARD, HARD uses PPC hardware breakpoint
+STEPMODE JTAG ;JTAG or HWBP, HWPB uses one or two hardware breakpoints
+VECTOR CATCH ;catch unhandled exceptions
+MMU XLAT 0xC0000000 ;enable virtual address mode
+PTBASE 0x000000f0 ;address where kernel/user stores pointer to page table
+SIO 2002 9600 ;TCP port for serial IO
+;SIO 2002 115200 ;TCP port for serial IO
+
+;REGLIST SPR ;select register to transfer to GDB
+;REGLIST ALL ;select register to transfer to GDB
+;SCANPRED 2 2 ;JTAG devices connected before PPC400
+;SCANSUCC 3 3 ;JTAG devices connected after PPC400
+
+[HOST]
+IP 10.0.1.2
+FORMAT ELF
+FILE linuxbios.elf
+;START 0x200000
+LOAD MANUAL ;load code MANUAL or AUTO after reset
+DEBUGPORT 2001
+DUMP dump.bin ;Linux: dump.bin must already exist and public writable
+
+[FLASH]
+WORKSPACE 0x00004000 ;workspace in target RAM for fast programming algorithm
+CHIPTYPE AM29BX16 ;Flash type (AM29F | AM29BX8 | AM29BX16 | I28BX8 | I28BX16)
+CHIPSIZE 0x400000 ;The size of one flash chip in bytes (e.g. AM29F040 = 0x80000)
+BUSWIDTH 16 ;The width of the flash memory bus in bits (8 | 16 | 32)
+ERASE 0xFFF80000 ;erase sector 0 of flash in U7 (AM29F040)
+ERASE 0xFFF90000 ;erase sector 1 of flash
+ERASE 0xFFFA0000 ;erase sector 2 of flash
+ERASE 0xFFFB0000 ;erase sector 3 of flash
+ERASE 0xFFFC0000 ;erase sector 4 of flash
+ERASE 0xFFFD0000 ;erase sector 5 of flash
+ERASE 0xFFFE0000 ;erase sector 6 of flash
+ERASE 0xFFFF0000 ;erase sector 7 of flash
+
+[REGS]
+IDCR1 0x010 0x011 ;MEMCFGADR and MEMCFGDATA
+IDCR2 0x012 0x013 ;EBCCFGADR and EBCCFGDATA
+IDCR3 0x014 0x015 ;KIAR and KIDR
+FILE reg405gp.def
diff --git a/src/mainboard/motorola/sandpoint/sp7410.cfg b/src/mainboard/motorola/sandpoint/sp7410.cfg
new file mode 100644
index 0000000000..b5b8391ec8
--- /dev/null
+++ b/src/mainboard/motorola/sandpoint/sp7410.cfg
@@ -0,0 +1,139 @@
+; bdiGDB configuration file for the Sandpoint X3 evaluation system
+; with the Altimus 7410 PMC
+;-----------------------------------------------------------------
+;
+[INIT]
+; init core register
+WREG MSR 0x00000000 ;clear MSR
+;
+; init memory controller (based on DINK32)
+WM32 0xFEC00000 0x46000080 ;select PCIARB
+WM16 0xFEE00002 0x0080 ;
+WM32 0xFEC00000 0x73000080 ;select ODCR
+WM8 0xFEE00003 0xd1 ;
+WM32 0xFEC00000 0x74000080 ;select CDCR
+WM16 0xFEE00000 0x00fd ;
+WM32 0xFEC00000 0x76000080 ;select MICR
+WM8 0xFEE00002 0x40 ;
+WM32 0xFEC00000 0x80000080 ;select MSAR1
+WM32 0xFEE00000 0x0080a0c0 ;
+WM32 0xFEC00000 0x84000080 ;select MSAR2
+WM32 0xFEE00000 0xe0002040 ;
+WM32 0xFEC00000 0x88000080 ;select MSAR3
+WM32 0xFEE00000 0x00000000 ;
+WM32 0xFEC00000 0x8c000080 ;select MSAR4
+WM32 0xFEE00000 0x00010101 ;
+WM32 0xFEC00000 0x90000080 ;select MEAR1
+WM32 0xFEE00000 0x7f9fbfdf ;
+WM32 0xFEC00000 0x94000080 ;select MEAR2
+WM32 0xFEE00000 0xff1f3f5f ;
+WM32 0xFEC00000 0x98000080 ;select MEAR3
+WM32 0xFEE00000 0x00000000 ;
+WM32 0xFEC00000 0x9c000080 ;select MEAR4
+WM32 0xFEE00000 0x00010101 ;
+WM32 0xFEC00000 0xa0000080 ;select MBEN
+WM8 0xFEE00000 0x01 ;
+WM32 0xFEC00000 0xa3000080 ;select PGMAX
+WM8 0xFEE00003 0x32 ;
+WM32 0xFEC00000 0xa8000080 ;select PIC1
+WM32 0xFEE00000 0x981a14ff ;
+WM32 0xFEC00000 0xac000080 ;select PIC2
+WM32 0xFEE00000 0x00000004 ;
+WM32 0xFEC00000 0xe0000080 ;select AMBOR
+WM8 0xFEE00000 0xc0 ;
+WM32 0xFEC00000 0xf0000080 ;select MCCR1
+WM32 0xFEE00000 0xaaaae075 ;do not set MEMGO
+WM32 0xFEC00000 0xf4000080 ;select MCCR2
+WM32 0xFEE00000 0x2c184004 ;
+WM32 0xFEC00000 0xf8000080 ;select MCCR3
+WM32 0xFEE00000 0x00003078 ;
+WM32 0xFEC00000 0xfc000080 ;select MCCR4
+WM32 0xFEE00000 0x39223235 ;
+DELAY 100
+WM32 0xFEC00000 0xf0000080 ;select MCCR1
+WM32 0xFEE00000 0xaaaae875 ;now set MEMGO
+;
+WM32 0xFEC00000 0x78000080 ;select EUMBBAR
+WM32 0xFEE00000 0x000000fc ;Embedded utility memory block at 0xFC000000
+;
+;WM32 0xFEC00000 0xa8000080 ;select PICR1
+;WM32 0xFEE00000 0x901014ff ;enable flash write (Flash on processor bus)
+
+;
+; Enable UART0
+;
+WM8 0xFE00015C 0x07
+WM8 0xFE00015D 0x06
+WM8 0xFE00015C 0x30
+WM8 0xFE00015D 0x00
+WM8 0xFE00015C 0x60
+WM8 0xFE00015D 0x03
+WM8 0xFE00015C 0x61
+WM8 0xFE00015D 0xf8
+WM8 0xFE00015C 0x30
+WM8 0xFE00015D 0x01
+;
+; define maximal transfer size
+;TSZ1 0xFF800000 0xFFFFFFFF ;ROM space (only for PCI boot ROM)
+TSZ4 0xFF800000 0xFFFFFFFF ;ROM space (only for Local bus flash)
+
+
+[TARGET]
+CPUTYPE 7400 ;the CPU type (603EV,750,8240,8260,7400)
+JTAGCLOCK 0 ;use 16 MHz JTAG clock
+WORKSPACE 0x00000000 ;workspace in target RAM for data cache flush
+BDIMODE AGENT ;the BDI working mode (LOADONLY | AGENT | GATEWAY)
+BREAKMODE HARD ;SOFT or HARD, HARD uses PPC hardware breakpoint
+;STEPMODE HWBP ;TRACE or HWBP, HWPB uses a hardware breakpoint
+;VECTOR CATCH ;catch unhandled exceptions
+DCACHE NOFLUSH ;data cache flushing (FLUSH | NOFLUSH)
+;PARITY ON ;enable data parity generation
+MEMDELAY 400 ;additional memory access delay
+;REGLIST STD ;select register to transfer to GDB
+;L2PM 0x00100000 0x80000 ;L2 privat memory
+;SIO 2002 115200
+SIO 2002 9600
+;MMU XLAT
+;PTBASE 0x000000f0
+
+[HOST]
+IP 10.0.1.11
+;FILE E:\cygnus\root\usr\demo\sp7400\vxworks
+FILE linuxbios.elf
+FORMAT ELF
+;START 0x403104
+LOAD MANUAL ;load code MANUAL or AUTO after reset
+DEBUGPORT 2001
+
+[FLASH]
+; Am29LV800BB on local processor bus (RCS0)
+; set PPMC7410 switch SW2-1 OFF => ROM on Local bus
+; enable flash write in PICR1 (see INIT part)
+; set maximal transfer size to 4 bytes (see INIT part)
+CHIPTYPE AM29BX8 ;Flash type (AM29F | AM29BX8 | AM29BX16 | I28BX8 | I28BX16)
+CHIPSIZE 0x100000 ;The size of one flash chip in bytes (e.g. Am29LV800BB = 0x100000)
+BUSWIDTH 8 ;The width of the flash memory bus in bits (8 | 16 | 32 | 64)
+WORKSPACE 0x00000000 ;workspace in SDRAM
+FILE linuxbios.elf
+FORMAT ELF
+ERASE 0xFFF00000 ;erase sector 0 of flash
+ERASE 0xFFF04000 ;erase sector 1 of flash
+ERASE 0xFFF06000 ;erase sector 2 of flash
+ERASE 0xFFF08000 ;erase sector 3 of flash
+ERASE 0xFFF10000 ;erase sector 4 of flash
+ERASE 0xFFF20000 ;erase sector 5 of flash
+ERASE 0xFFF30000 ;erase sector 6 of flash
+ERASE 0xFFF40000 ;erase sector 7 of flash
+ERASE 0xFFF50000 ;erase sector 8 of flash
+ERASE 0xFFF60000 ;erase sector 9 of flash
+ERASE 0xFFF70000 ;erase sector 10 of flash
+
+[REGS]
+DMM1 0xFC000000 ;Embedded utility memory base address
+IMM1 0xFEC00000 0xFEE00000 ;configuration registers at byte offset 0
+IMM2 0xFEC00000 0xFEE00001 ;configuration registers at byte offset 1
+IMM3 0xFEC00000 0xFEE00002 ;configuration registers at byte offset 2
+IMM4 0xFEC00000 0xFEE00003 ;configuration registers at byte offset 3
+FILE mpc107.def
+
+
diff --git a/src/mainboard/totalimpact/briq/briQ7400.cfg b/src/mainboard/totalimpact/briq/briQ7400.cfg
new file mode 100644
index 0000000000..20a438703e
--- /dev/null
+++ b/src/mainboard/totalimpact/briq/briQ7400.cfg
@@ -0,0 +1,178 @@
+; bdiGDB configuration file for briQ (http://www.totalimpact.com)
+; ---------------------------------------------------------------
+;
+; NOTE: As of June 2004, you will need to install a pull-down
+; on the COP/JTAG QACK line. Without this, the BDI2000
+; is not able to halt the CPU
+; (http://www.ultsol.com/faq-P210.htm)
+;
+[INIT]
+; init core register
+WREG MSR 0x00000000 ;clear MSR
+;
+; init CPC710
+;
+WM32 0xFF000010 0xF0000000 ; RSTR
+WM32 0xFF001020 0x00000000 ; SIOC
+WM32 0xFF001000 0x00780000 ; UCTL (resID=7|TBE)
+WM32 0xFF001030 0x00000000 ; ABCNTL
+WM32 0xFF001040 0x00000000 ; SRST
+WM32 0xFF001050 0x00000000 ; ERRC
+WM32 0xFF001060 0x00000000 ; SESR
+WM32 0xFF001070 0x00000000 ; SEAR
+WM32 0xFF001100 0x000000E0 ; PGCHP (PReP|ARTRY|750|SYS_TEA)
+WM32 0xFF001130 0x40000000 ; GPDIR
+WM32 0xFF001150 0x40000000 ; GPOUT
+WM32 0xFF001160 0x709C2508 ; ATAS
+WM32 0xFF001170 0x00000000 ; AVDG
+WM32 0xFF001220 0x00000000 ; MESR
+WM32 0xFF001230 0x00000000 ; MEAR
+WM32 0xFF001210 0x00000000 ; MWPR
+WM32 0xFF001120 0x00000000 ; RGBAN1
+;
+; init memory - this assumes 2 x 512MB DIMMs
+;
+WM32 0xFF001300 0x80000080 ; MCER0
+WM32 0xFF001310 0x82000080 ; MCER1
+WM32 0xFF001320 0x00000000 ; MCER2
+WM32 0xFF001330 0x00000000 ; MCER3
+WM32 0xFF001340 0x00000000 ; MCER4
+WM32 0xFF001350 0x00000000 ; MCER5
+WM32 0xFF001200 0xD2B06000 ; MCCR
+DELAY 1000
+;
+; enable pci
+;
+WM32 0xFF00000C 0x80000002 ; CNFR
+WM32 0xFF200018 0xFF500000 ; PCIBAR
+WM32 0xFF201000 0x80000000 ; PCIENB
+WM32 0xFF00000C 0x00000000 ; CNFR
+;
+; config pci
+;
+WM32 0xFF5F8000 0x06000080
+WM16 0xFF5F8010 0xFFFF
+WM32 0xFF5F8000 0x40000080
+WM16 0xFF5F8010 0x0000
+WM32 0xFF5F6120 0x40000000 ; PCIDG
+WM32 0xFF5F7800 0x00000000 ; PIBAR
+WM32 0xFF5F7810 0x00000000 ; PMBAR
+WM32 0xFF5F7F20 0xA000C000 ; PR
+WM32 0xFF5F7F30 0xFC000000 ; ACR
+WM32 0xFF5F7F40 0xF8000000 ; MSIZE
+WM32 0xFF5F7F60 0xF8000000 ; IOSIZE
+WM32 0xFF5F7F80 0xC0000000 ; SMBAR
+WM32 0xFF5F7FC0 0x80000000 ; SIBAR
+WM32 0xFF5F8100 0x00000080 ; PSSIZE
+WM32 0xFF5F8120 0x00000000 ; BARPS
+WM32 0xFF5F8140 0x00000080 ; PSBAR
+WM32 0xFF5F8200 0x00000000 ; BPMDLK
+WM32 0xFF5F8210 0x00000000 ; TPMDLK
+WM32 0xFF5F8220 0x00000000 ; BIODLK
+WM32 0xFF5F8230 0x00000000 ; TIODLK
+WM32 0xFF5F8000 0x04000080
+WM16 0xFF5F8010 0xA7FD
+WM32 0xFF5F7EF0 0xFC000000 ; CRR
+;
+; VFD - output the sequence '01234' to show
+; something is happening
+;
+;WM8 0x80000390 0x38
+;WM8 0x80000390 0x01
+;WM8 0x80000390 0x0C
+;WM8 0x80000390 0x06
+;WM8 0x80000390 0x02
+;DELAY 100
+;WM8 0x80000391 0x30
+;DELAY 100
+;WM8 0x80000391 0x31
+;DELAY 100
+;WM8 0x80000391 0x32
+;DELAY 100
+;WM8 0x80000391 0x33
+;DELAY 100
+;WM8 0x80000391 0x34
+;
+; UART - output the sequence '01234' to show
+; something is happening
+;
+WM8 0x800003F9 0
+WM8 0x800003FA 1
+WM8 0x800003FB 0x83
+WM8 0x800003F8 4 ; 115200
+WM8 0x800003F9 0
+WM8 0x800003FB 0x3
+DELAY 100
+WM8 0x800003F8 0x30
+DELAY 100
+WM8 0x800003F8 0x31
+DELAY 100
+WM8 0x800003F8 0x32
+DELAY 100
+WM8 0x800003F8 0x33
+DELAY 100
+WM8 0x800003F8 0x34
+;
+; define maximal transfer size
+;TSZ1 0xFF800000 0xFFFFFFFF ;ROM space (only for PCI boot ROM)
+TSZ4 0xFF800000 0xFFFFFFFF ;ROM space (only for Local bus flash)
+
+
+[TARGET]
+CPUTYPE 7400 ;the CPU type (603EV,750,8240,8260,7400)
+JTAGCLOCK 0 ;use 16 MHz JTAG clock
+WORKSPACE 0x00000000 ;workspace in target RAM for data cache flush
+BDIMODE AGENT ;the BDI working mode (LOADONLY | AGENT | GATEWAY)
+BREAKMODE HARD ;SOFT or HARD, HARD uses PPC hardware breakpoint
+STEPMODE TRACE ;TRACE or HWBP, HWPB uses a hardware breakpoint
+;VECTOR CATCH ;catch unhandled exceptions
+DCACHE FLUSH ;data cache flushing (FLUSH | NOFLUSH)
+;PARITY ON ;enable data parity generation
+;MEMDELAY 4000 ;additional memory access delay
+;REGLIST STD ;select register to transfer to GDB
+;L2PM 0x00100000 0x80000 ;L2 privat memory
+BOOTADDR 0xfff00100
+STARTUP RESET
+
+[HOST]
+FORMAT ELF
+LOAD MANUAL ;load code MANUAL or AUTO after reset
+DEBUGPORT 2001
+
+[FLASH]
+; Am29LV800BB on local processor bus (RCS0)
+; set PPMC7410 switch SW2-1 OFF => ROM on Local bus
+; enable flash write in PICR1 (see INIT part)
+; set maximal transfer size to 4 bytes (see INIT part)
+CHIPTYPE AM29F ;Flash type (AM29F | AM29BX8 | AM29BX16 | I28BX8 | I28BX16)
+CHIPSIZE 0x100000 ;The size of one flash chip in bytes (e.g. Am29LV800BB = 0x100000)
+BUSWIDTH 8 ;The width of the flash memory bus in bits (8 | 16 | 32 | 64)
+;WORKSPACE 0x00000000 ;workspace in SDRAM
+FILE linuxbios.rom
+FORMAT ELF
+ERASE 0xFFF00000 ;erase sector 0 of flash
+ERASE 0xFFF10000 ;erase sector 1 of flash
+ERASE 0xFFF20000 ;erase sector 2 of flash
+ERASE 0xFFF30000 ;erase sector 3 of flash
+ERASE 0xFFF40000 ;erase sector 4 of flash
+ERASE 0xFFF50000 ;erase sector 5 of flash
+ERASE 0xFFF60000 ;erase sector 6 of flash
+ERASE 0xFFF70000 ;erase sector 7 of flash
+;ERASE 0xFFF80000 ;erase sector 8 of flash
+;ERASE 0xFFF90000 ;erase sector 9 of flash
+;ERASE 0xFFFA0000 ;erase sector 10 of flash
+;ERASE 0xFFFB0000 ;erase sector 11 of flash
+;ERASE 0xFFFC0000 ;erase sector 12 of flash
+;ERASE 0xFFFD0000 ;erase sector 13 of flash
+;ERASE 0xFFFE0000 ;erase sector 14 of flash
+;ERASE 0xFFFF0000 ;erase sector 15 of flash
+
+[REGS]
+;DMM1 0xFC000000 ;Embedded utility memory base address
+;IMM1 0xFEC00000 0xFEE00000 ;configuration registers at byte offset 0
+;IMM2 0xFEC00000 0xFEE00001 ;configuration registers at byte offset 1
+;IMM3 0xFEC00000 0xFEE00002 ;configuration registers at byte offset 2
+;IMM4 0xFEC00000 0xFEE00003 ;configuration registers at byte offset 3
+FILE cpc700.def
+
+