summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorPatrick Georgi <patrick@georgi-clan.de>2012-07-13 19:06:22 +0200
committerPatrick Georgi <patrick@georgi-clan.de>2012-07-26 21:33:31 +0200
commit7dc2864be7fcc342bab0c167997803f5faf147a1 (patch)
treebf94e8694da70ef352eca13a04945e0ddc7c5e70 /src
parent1b3207ee617c24fd283e654359c20c88d95a69c8 (diff)
downloadcoreboot-7dc2864be7fcc342bab0c167997803f5faf147a1.tar.xz
amd/lx: Move configuration from source to Kconfig
LX has two values that are usually automatically derived but can be overridden, that were so far defined in each board's romstage. These values, along with the toggle to enable override are now part of LX's Kconfig. For boards that gave values but requested autogeneration, the values are removed. Further improvements: Figure out the various fields in PLLMSRlo and make them sensible Kconfig options (instead of the hex value it is now) Change-Id: I8a17c89e4a3cb1b52aaceef645955ab7817b482d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1227 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/aaeon/pfm-540i_revb/romstage.c6
-rw-r--r--src/mainboard/amd/db800/romstage.c6
-rw-r--r--src/mainboard/amd/norwich/romstage.c6
-rw-r--r--src/mainboard/artecgroup/dbe61/romstage.c8
-rw-r--r--src/mainboard/bachmann/ot200/Kconfig6
-rw-r--r--src/mainboard/bachmann/ot200/romstage.c6
-rw-r--r--src/mainboard/digitallogic/msm800sev/romstage.c6
-rw-r--r--src/mainboard/iei/pcisa-lx-800-r10/Kconfig6
-rw-r--r--src/mainboard/iei/pcisa-lx-800-r10/romstage.c10
-rw-r--r--src/mainboard/iei/pm-lx-800-r11/Kconfig19
-rw-r--r--src/mainboard/iei/pm-lx-800-r11/romstage.c12
-rw-r--r--src/mainboard/lippert/hurricane-lx/Kconfig6
-rw-r--r--src/mainboard/lippert/hurricane-lx/romstage.c6
-rw-r--r--src/mainboard/lippert/literunner-lx/Kconfig6
-rw-r--r--src/mainboard/lippert/literunner-lx/romstage.c6
-rw-r--r--src/mainboard/lippert/roadrunner-lx/Kconfig6
-rw-r--r--src/mainboard/lippert/roadrunner-lx/romstage.c6
-rw-r--r--src/mainboard/lippert/spacerunner-lx/Kconfig6
-rw-r--r--src/mainboard/lippert/spacerunner-lx/romstage.c6
-rw-r--r--src/mainboard/pcengines/alix1c/romstage.c6
-rw-r--r--src/mainboard/pcengines/alix2d/romstage.c6
-rw-r--r--src/mainboard/traverse/geos/Kconfig6
-rw-r--r--src/mainboard/traverse/geos/romstage.c6
-rw-r--r--src/mainboard/winent/pl6064/romstage.c6
-rw-r--r--src/northbridge/amd/lx/Kconfig31
-rw-r--r--src/northbridge/amd/lx/pll_reset.c8
26 files changed, 97 insertions, 111 deletions
diff --git a/src/mainboard/aaeon/pfm-540i_revb/romstage.c b/src/mainboard/aaeon/pfm-540i_revb/romstage.c
index 4b510a9f21..2d3b71df6a 100644
--- a/src/mainboard/aaeon/pfm-540i_revb/romstage.c
+++ b/src/mainboard/aaeon/pfm-540i_revb/romstage.c
@@ -47,10 +47,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
return smbus_read_byte(device, address);
}
-#define ManualConf 0 /* Do automatic strapped PLL config */
-#define PLLMSRhi 0x000005DD /* Manual settings for the PLL */
-#define PLLMSRlo 0x00DE60EE
-
#include "northbridge/amd/lx/raminit.h"
#include "northbridge/amd/lx/pll_reset.c"
#include "northbridge/amd/lx/raminit.c"
@@ -79,7 +75,7 @@ void main(unsigned long bist)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- pll_reset(ManualConf);
+ pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/amd/db800/romstage.c b/src/mainboard/amd/db800/romstage.c
index 3590c37bfe..2bb6cd379a 100644
--- a/src/mainboard/amd/db800/romstage.c
+++ b/src/mainboard/amd/db800/romstage.c
@@ -41,10 +41,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
return smbus_read_byte(device, address);
}
-#define ManualConf 0 /* Do automatic strapped PLL config */
-#define PLLMSRhi 0x000005DD /* Manual settings for the PLL */
-#define PLLMSRlo 0x00DE60EE
-
#include "northbridge/amd/lx/raminit.h"
#include "northbridge/amd/lx/pll_reset.c"
#include "northbridge/amd/lx/raminit.c"
@@ -74,7 +70,7 @@ void main(unsigned long bist)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- pll_reset(ManualConf);
+ pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/amd/norwich/romstage.c b/src/mainboard/amd/norwich/romstage.c
index d8fca5a51f..c71b31f2d3 100644
--- a/src/mainboard/amd/norwich/romstage.c
+++ b/src/mainboard/amd/norwich/romstage.c
@@ -38,10 +38,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
return smbus_read_byte(device, address);
}
-#define ManualConf 0 /* Do automatic strapped PLL config */
-#define PLLMSRhi 0x00001490 /* manual settings for the PLL */
-#define PLLMSRlo 0x02000030
-
#include "northbridge/amd/lx/raminit.h"
#include "northbridge/amd/lx/pll_reset.c"
#include "northbridge/amd/lx/raminit.c"
@@ -75,7 +71,7 @@ void main(unsigned long bist)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- pll_reset(ManualConf);
+ pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/artecgroup/dbe61/romstage.c b/src/mainboard/artecgroup/dbe61/romstage.c
index f97af920c5..61bd03ee2b 100644
--- a/src/mainboard/artecgroup/dbe61/romstage.c
+++ b/src/mainboard/artecgroup/dbe61/romstage.c
@@ -51,12 +51,6 @@ static int spd_read_byte(unsigned device, unsigned address)
return 0xFF;
}
-#define ManualConf 0 /* Do automatic strapped PLL config */
-/* CPU and GLIU mult/div 500/266*/
-#define PLLMSRhi 0x0000039C /* 33MHz PCI, 0x000003DD for 66MHz PCI */
-/* Hold Count - how long we will sit in reset */
-#define PLLMSRlo 0x00DE6000
-
#include "northbridge/amd/lx/raminit.h"
#include "northbridge/amd/lx/pll_reset.c"
#include "northbridge/amd/lx/raminit.c"
@@ -94,7 +88,7 @@ void main(unsigned long bist)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- pll_reset(ManualConf);
+ pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/bachmann/ot200/Kconfig b/src/mainboard/bachmann/ot200/Kconfig
index a201bdec4b..5d185c0d70 100644
--- a/src/mainboard/bachmann/ot200/Kconfig
+++ b/src/mainboard/bachmann/ot200/Kconfig
@@ -12,6 +12,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select BOARD_ROMSIZE_KB_2048
select POWER_BUTTON_DEFAULT_DISABLE
select DRIVERS_I2C_IDREG
+ select PLL_MANUAL_CONFIG
+ select CORE_GLIU_500_266
config MAINBOARD_DIR
string
@@ -25,4 +27,8 @@ config IRQ_SLOT_COUNT
int
default 6
+config PLLMSRlo
+ hex
+ default 0x07de001e
+
endif # BOARD_BACHMANN_OT200
diff --git a/src/mainboard/bachmann/ot200/romstage.c b/src/mainboard/bachmann/ot200/romstage.c
index 9edd5f7251..3a8ecad178 100644
--- a/src/mainboard/bachmann/ot200/romstage.c
+++ b/src/mainboard/bachmann/ot200/romstage.c
@@ -39,10 +39,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
return smbus_read_byte(device, address);
}
-#define ManualConf 1 /* Do automatic strapped PLL config */
-#define PLLMSRhi 0x0000039c /* CPU 500 MHz - GLIU 266 MHz */
-#define PLLMSRlo 0x07de001e
-
#include "northbridge/amd/lx/raminit.h"
#include "northbridge/amd/lx/pll_reset.c"
#include "northbridge/amd/lx/raminit.c"
@@ -75,7 +71,7 @@ void main(unsigned long bist)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- pll_reset(ManualConf);
+ pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/digitallogic/msm800sev/romstage.c b/src/mainboard/digitallogic/msm800sev/romstage.c
index d30e2b0808..caafd2f3cd 100644
--- a/src/mainboard/digitallogic/msm800sev/romstage.c
+++ b/src/mainboard/digitallogic/msm800sev/romstage.c
@@ -22,10 +22,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
return smbus_read_byte(device, address);
}
-#define ManualConf 0 /* Do automatic strapped PLL config */
-#define PLLMSRhi 0x00001490 /* manual settings for the PLL */
-#define PLLMSRlo 0x02000030
-
#include "northbridge/amd/lx/raminit.h"
#include "northbridge/amd/lx/pll_reset.c"
#include "northbridge/amd/lx/raminit.c"
@@ -57,7 +53,7 @@ void main(unsigned long bist)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- pll_reset(ManualConf);
+ pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/iei/pcisa-lx-800-r10/Kconfig b/src/mainboard/iei/pcisa-lx-800-r10/Kconfig
index eae72aef4d..69e106e750 100644
--- a/src/mainboard/iei/pcisa-lx-800-r10/Kconfig
+++ b/src/mainboard/iei/pcisa-lx-800-r10/Kconfig
@@ -11,6 +11,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select PIRQ_ROUTE
select BOARD_ROMSIZE_KB_256
select POWER_BUTTON_FORCE_ENABLE
+ select PLL_MANUAL_CONFIG
+ select CORE_GLIU_500_266
config MAINBOARD_DIR
string
@@ -24,4 +26,8 @@ config IRQ_SLOT_COUNT
int
default 9
+config PLLMSRlo
+ hex
+ default 0x00DE6000
+
endif # BOARD_IEI_PCISA_LX_800_R10
diff --git a/src/mainboard/iei/pcisa-lx-800-r10/romstage.c b/src/mainboard/iei/pcisa-lx-800-r10/romstage.c
index aec984327a..7bd1b74ba1 100644
--- a/src/mainboard/iei/pcisa-lx-800-r10/romstage.c
+++ b/src/mainboard/iei/pcisa-lx-800-r10/romstage.c
@@ -41,14 +41,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
return smbus_read_byte(device, address);
}
-#define ManualConf 1 /* Do automatic strapped PLL config */
-//#define PLLMSRhi 0x0000059C /* CPU and GLIU mult/div 500/400*/
-//#define PLLMSRhi 0x0000049C /* CPU and GLIU mult/div 500/333*/
-#define PLLMSRhi 0x0000039C /* CPU and GLIU mult/div 500/266*/
-//0x0000059C 0000 0000 0000 0000 0000 |0101 1|0|01 110|0
-/* Hold Count - how long we will sit in reset */
-#define PLLMSRlo 0x00DE6000
-
#include "northbridge/amd/lx/raminit.h"
#include "northbridge/amd/lx/pll_reset.c"
#include "northbridge/amd/lx/raminit.c"
@@ -78,7 +70,7 @@ void main(unsigned long bist)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- pll_reset(ManualConf);
+ pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/iei/pm-lx-800-r11/Kconfig b/src/mainboard/iei/pm-lx-800-r11/Kconfig
index a897106e68..e443c6c8d6 100644
--- a/src/mainboard/iei/pm-lx-800-r11/Kconfig
+++ b/src/mainboard/iei/pm-lx-800-r11/Kconfig
@@ -32,6 +32,8 @@ config BOARD_SPECIFIC_OPTIONS
select PIRQ_ROUTE
select BOARD_ROMSIZE_KB_512
select POWER_BUTTON_FORCE_ENABLE
+ select PLL_MANUAL_CONFIG
+ select CORE_GLIU_500_266
config MAINBOARD_DIR
string
@@ -45,19 +47,8 @@ config IRQ_SLOT_COUNT
int
default 7
-choice
- prompt "Core/GLIU Frequency"
- default CORE_GLIU_500_266
-
-config CORE_GLIU_500_266
- bool "500MHz / 266MHz"
-
-config CORE_GLIU_500_333
- bool "500MHz / 333MHz"
-
-config CORE_GLIU_500_400
- bool "500MHz / 400MHz"
-
-endchoice
+config PLLMSRlo
+ hex
+ default 0x07de0000
endif # BOARD_IEI_PM_LX_800_R11
diff --git a/src/mainboard/iei/pm-lx-800-r11/romstage.c b/src/mainboard/iei/pm-lx-800-r11/romstage.c
index f7566221db..2992f53c12 100644
--- a/src/mainboard/iei/pm-lx-800-r11/romstage.c
+++ b/src/mainboard/iei/pm-lx-800-r11/romstage.c
@@ -46,16 +46,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
return smbus_read_byte(device, address);
}
-#if CONFIG_CORE_GLIU_500_400
-# define PLLMSRhi 0x0000059c
-#elif CONFIG_CORE_GLIU_500_333
-# define PLLMSRhi 0x0000049c
-#else
-# define PLLMSRhi 0x0000039c
-#endif
-
-#define PLLMSRlo 0x07de000
-
#include <northbridge/amd/lx/raminit.h>
#include <northbridge/amd/lx/pll_reset.c>
#include <northbridge/amd/lx/raminit.c>
@@ -80,7 +70,7 @@ void main(unsigned long bist)
report_bist_failure(bist);
- pll_reset(1);
+ pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/lippert/hurricane-lx/Kconfig b/src/mainboard/lippert/hurricane-lx/Kconfig
index 118809d333..64e16318c4 100644
--- a/src/mainboard/lippert/hurricane-lx/Kconfig
+++ b/src/mainboard/lippert/hurricane-lx/Kconfig
@@ -13,6 +13,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy
# Board is equipped with a 1 MB SPI flash, however, due to limitations
# of the IT8712F Super I/O, only the top 512 KB are directly mapped.
select BOARD_ROMSIZE_KB_512
+ select PLL_MANUAL_CONFIG
+ select CORE_GLIU_500_333
config MAINBOARD_DIR
string
@@ -50,4 +52,8 @@ config ONBOARD_UARTS_RS485
If selected, both on-board serial ports will operate in RS485 mode
instead of RS232.
+config PLLMSRlo
+ hex
+ default 0x00de6001
+
endif # BOARD_LIPPERT_HURRICANE_LX
diff --git a/src/mainboard/lippert/hurricane-lx/romstage.c b/src/mainboard/lippert/hurricane-lx/romstage.c
index 29aa9d1e4f..b2ee033013 100644
--- a/src/mainboard/lippert/hurricane-lx/romstage.c
+++ b/src/mainboard/lippert/hurricane-lx/romstage.c
@@ -40,10 +40,6 @@
/* Bit0 enables Spread Spectrum. */
#define SMC_CONFIG 0x01
-#define ManualConf 1 /* No automatic strapped PLL config */
-#define PLLMSRhi 0x0000049C /* Manual settings for the PLL */
-#define PLLMSRlo 0x00DE6001
-
static inline int spd_read_byte(unsigned int device, unsigned int address)
{
if (device != DIMM0)
@@ -138,7 +134,7 @@ void main(unsigned long bist)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- pll_reset(ManualConf);
+ pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/lippert/literunner-lx/Kconfig b/src/mainboard/lippert/literunner-lx/Kconfig
index 12a3ae145b..c4684c94e2 100644
--- a/src/mainboard/lippert/literunner-lx/Kconfig
+++ b/src/mainboard/lippert/literunner-lx/Kconfig
@@ -15,6 +15,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy
# of the IT8712F Super I/O, only the top 512 KB are directly mapped.
select BOARD_ROMSIZE_KB_512
select POWER_BUTTON_FORCE_ENABLE
+ select PLL_MANUAL_CONFIG
+ select CORE_GLIU_500_400
config MAINBOARD_DIR
string
@@ -42,4 +44,8 @@ config ONBOARD_IDE_SLAVE
If selected, the on-board Compact Flash card socket will act as IDE
Slave instead of Master.
+config PLLMSRlo
+ hex
+ default 0x00de6001
+
endif # BOARD_LIPPERT_LITERUNNER_LX
diff --git a/src/mainboard/lippert/literunner-lx/romstage.c b/src/mainboard/lippert/literunner-lx/romstage.c
index 1e82bdb70e..77e2d125f3 100644
--- a/src/mainboard/lippert/literunner-lx/romstage.c
+++ b/src/mainboard/lippert/literunner-lx/romstage.c
@@ -44,10 +44,6 @@
#define SMC_CONFIG 0x01
#endif
-#define ManualConf 1 /* No automatic strapped PLL config */
-#define PLLMSRhi 0x0000059C /* Manual settings for the PLL */
-#define PLLMSRlo 0x00DE6001
-
static const unsigned char spdbytes[] = { // 4x Promos V58C2512164SA-J5I
0xFF, 0xFF, // only values used by Geode-LX raminit.c are set
[SPD_MEMORY_TYPE] = SPD_MEMORY_TYPE_SDRAM_DDR, // (Fundamental) memory type
@@ -181,7 +177,7 @@ void main(unsigned long bist)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- pll_reset(ManualConf);
+ pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/lippert/roadrunner-lx/Kconfig b/src/mainboard/lippert/roadrunner-lx/Kconfig
index 2d11b33972..f5ec9b9d77 100644
--- a/src/mainboard/lippert/roadrunner-lx/Kconfig
+++ b/src/mainboard/lippert/roadrunner-lx/Kconfig
@@ -14,6 +14,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy
# SST 49LF008A is possible.
select BOARD_ROMSIZE_KB_512
select POWER_BUTTON_FORCE_ENABLE
+ select PLL_MANUAL_CONFIG
+ select CORE_GLIU_500_333
config MAINBOARD_DIR
string
@@ -34,4 +36,8 @@ config ONBOARD_UARTS_RS485
If selected, both on-board serial ports will operate in RS485 mode
instead of RS232.
+config PLLMSRlo
+ hex
+ default 0x00de6001
+
endif # BOARD_LIPPERT_ROADRUNNER_LX
diff --git a/src/mainboard/lippert/roadrunner-lx/romstage.c b/src/mainboard/lippert/roadrunner-lx/romstage.c
index 20e5b6a1a9..827c41b980 100644
--- a/src/mainboard/lippert/roadrunner-lx/romstage.c
+++ b/src/mainboard/lippert/roadrunner-lx/romstage.c
@@ -37,10 +37,6 @@
#include "southbridge/amd/cs5536/early_setup.c"
#include "superio/ite/it8712f/early_serial.c"
-#define ManualConf 1 /* No automatic strapped PLL config */
-#define PLLMSRhi 0x0000049C /* Manual settings for the PLL */
-#define PLLMSRlo 0x00DE6001
-
static inline int spd_read_byte(unsigned int device, unsigned int address)
{
if (device != DIMM0)
@@ -113,7 +109,7 @@ void main(unsigned long bist)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- pll_reset(ManualConf);
+ pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/lippert/spacerunner-lx/Kconfig b/src/mainboard/lippert/spacerunner-lx/Kconfig
index 99ecf7c066..c4a2ce8937 100644
--- a/src/mainboard/lippert/spacerunner-lx/Kconfig
+++ b/src/mainboard/lippert/spacerunner-lx/Kconfig
@@ -15,6 +15,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy
# of the IT8712F Super I/O, only the top 512 KB are directly mapped.
select BOARD_ROMSIZE_KB_512
select POWER_BUTTON_FORCE_ENABLE
+ select PLL_MANUAL_CONFIG
+ select CORE_GLIU_500_400
config MAINBOARD_DIR
string
@@ -41,4 +43,8 @@ config ONBOARD_IDE_SLAVE
help
If selected, the on-board SSD will act as IDE Slave instead of Master.
+config PLLMSRlo
+ hex
+ default 0x00de6001
+
endif # BOARD_LIPPERT_SPACERUNNER_LX
diff --git a/src/mainboard/lippert/spacerunner-lx/romstage.c b/src/mainboard/lippert/spacerunner-lx/romstage.c
index 9dcb37b4c9..d62c039513 100644
--- a/src/mainboard/lippert/spacerunner-lx/romstage.c
+++ b/src/mainboard/lippert/spacerunner-lx/romstage.c
@@ -44,10 +44,6 @@
#define SMC_CONFIG 0x01
#endif
-#define ManualConf 1 /* No automatic strapped PLL config */
-#define PLLMSRhi 0x0000059C /* Manual settings for the PLL */
-#define PLLMSRlo 0x00DE6001
-
static const unsigned char spdbytes[] = { // 4x Promos V58C2512164SA-J5I
0xFF, 0xFF, // only values used by Geode-LX raminit.c are set
[SPD_MEMORY_TYPE] = SPD_MEMORY_TYPE_SDRAM_DDR, // (Fundamental) memory type
@@ -178,7 +174,7 @@ void main(unsigned long bist)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- pll_reset(ManualConf);
+ pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/pcengines/alix1c/romstage.c b/src/mainboard/pcengines/alix1c/romstage.c
index f109031a8c..9de3863bc7 100644
--- a/src/mainboard/pcengines/alix1c/romstage.c
+++ b/src/mainboard/pcengines/alix1c/romstage.c
@@ -99,10 +99,6 @@ static u8 spd_read_byte(u8 device, u8 address)
return spdbytes[address];
}
-#define ManualConf 0 /* Do automatic strapped PLL config */
-#define PLLMSRhi 0x00001490 /* Manual settings for the PLL */
-#define PLLMSRlo 0x02000030
-
#include "northbridge/amd/lx/raminit.h"
#include "northbridge/amd/lx/pll_reset.c"
#include "northbridge/amd/lx/raminit.c"
@@ -132,7 +128,7 @@ void main(unsigned long bist)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- pll_reset(ManualConf);
+ pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/pcengines/alix2d/romstage.c b/src/mainboard/pcengines/alix2d/romstage.c
index 0e8cc63a16..fd5582dc38 100644
--- a/src/mainboard/pcengines/alix2d/romstage.c
+++ b/src/mainboard/pcengines/alix2d/romstage.c
@@ -98,10 +98,6 @@ static u8 spd_read_byte(u8 device, u8 address)
return spdbytes[address];
}
-#define ManualConf 0 /* Do automatic strapped PLL config */
-#define PLLMSRhi 0x00001490 /* Manual settings for the PLL */
-#define PLLMSRlo 0x02000030
-
#include "northbridge/amd/lx/raminit.h"
#include "northbridge/amd/lx/pll_reset.c"
#include "northbridge/amd/lx/raminit.c"
@@ -156,7 +152,7 @@ void main(unsigned long bist)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- pll_reset(ManualConf);
+ pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/traverse/geos/Kconfig b/src/mainboard/traverse/geos/Kconfig
index 40679fe1f1..3139d7dc1b 100644
--- a/src/mainboard/traverse/geos/Kconfig
+++ b/src/mainboard/traverse/geos/Kconfig
@@ -11,6 +11,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select UDELAY_TSC
select BOARD_ROMSIZE_KB_1024
select POWER_BUTTON_DEFAULT_DISABLE
+ select PLL_MANUAL_CONFIG
+ select CORE_GLIU_500_400
config MAINBOARD_DIR
string
@@ -24,4 +26,8 @@ config IRQ_SLOT_COUNT
int
default 6
+config PLLMSRlo
+ hex
+ default 0x00de602e
+
endif # BOARD_TRAVERSE_GEOS
diff --git a/src/mainboard/traverse/geos/romstage.c b/src/mainboard/traverse/geos/romstage.c
index 588681bfbb..0b61d41122 100644
--- a/src/mainboard/traverse/geos/romstage.c
+++ b/src/mainboard/traverse/geos/romstage.c
@@ -39,10 +39,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
return smbus_read_byte(device, address);
}
-#define ManualConf 1 /* Do automatic strapped PLL config */
-#define PLLMSRhi 0x0000059C /* manual settings for the PLL */
-#define PLLMSRlo 0x00DE602E
-
#include "northbridge/amd/lx/raminit.h"
#include "northbridge/amd/lx/pll_reset.c"
#include "northbridge/amd/lx/raminit.c"
@@ -75,7 +71,7 @@ void main(unsigned long bist)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- pll_reset(ManualConf);
+ pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/winent/pl6064/romstage.c b/src/mainboard/winent/pl6064/romstage.c
index 6651acd4ca..39e4ecf8b0 100644
--- a/src/mainboard/winent/pl6064/romstage.c
+++ b/src/mainboard/winent/pl6064/romstage.c
@@ -43,10 +43,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
return smbus_read_byte(device, address);
}
-#define ManualConf 0 /* Do automatic strapped PLL config */
-#define PLLMSRhi 0x00001490 /* Manual settings for the PLL */
-#define PLLMSRlo 0x02000030
-
#include "northbridge/amd/lx/raminit.h"
#include "northbridge/amd/lx/pll_reset.c"
#include "northbridge/amd/lx/raminit.c"
@@ -77,7 +73,7 @@ void main(unsigned long bist)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- pll_reset(ManualConf);
+ pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/northbridge/amd/lx/Kconfig b/src/northbridge/amd/lx/Kconfig
index c1fea495ff..d74d71554a 100644
--- a/src/northbridge/amd/lx/Kconfig
+++ b/src/northbridge/amd/lx/Kconfig
@@ -2,7 +2,36 @@ config NORTHBRIDGE_AMD_LX
bool
select GEODE_VSA
+if NORTHBRIDGE_AMD_LX
+
config VIDEO_MB
int
default 8
- depends on NORTHBRIDGE_AMD_LX
+
+config PLL_MANUAL_CONFIG
+ bool
+
+if PLL_MANUAL_CONFIG
+
+# "Core/GLIU Frequency"
+config CORE_GLIU_500_266
+ bool # "500MHz / 266MHz"
+
+config CORE_GLIU_500_333
+ bool # "500MHz / 333MHz"
+
+config CORE_GLIU_500_400
+ bool # "500MHz / 400MHz"
+
+config PLLMSRhi
+ hex
+ default 0x39c if CORE_GLIU_500_266
+ default 0x49c if CORE_GLIU_500_333
+ default 0x59c if CORE_GLIU_500_400
+
+config PLLMSRlo
+ hex
+
+endif
+
+endif
diff --git a/src/northbridge/amd/lx/pll_reset.c b/src/northbridge/amd/lx/pll_reset.c
index 3077b61c9c..bf01e54e29 100644
--- a/src/northbridge/amd/lx/pll_reset.c
+++ b/src/northbridge/amd/lx/pll_reset.c
@@ -18,7 +18,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-static void pll_reset(char manualconf)
+static void pll_reset(void)
{
msr_t msrGlcpSysRstpll;
@@ -31,13 +31,13 @@ static void pll_reset(char manualconf)
if (!(msrGlcpSysRstpll.lo & (1 << RSTPLL_LOWER_SWFLAGS_SHIFT))) {
printk(BIOS_DEBUG, "Configuring PLL.\n");
- if (manualconf) {
+ if (CONFIG_PLL_MANUAL_CONFIG) {
post_code(POST_PLL_MANUAL);
/* CPU and GLIU mult/div (GLMC_CLK = GLIU_CLK / 2) */
- msrGlcpSysRstpll.hi = PLLMSRhi;
+ msrGlcpSysRstpll.hi = CONFIG_PLLMSRhi;
/* Hold Count - how long we will sit in reset */
- msrGlcpSysRstpll.lo = PLLMSRlo;
+ msrGlcpSysRstpll.lo = CONFIG_PLLMSRlo;
} else {
/*automatic configuration (straps) */
post_code(POST_PLL_STRAP);