summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorStefan Reinauer <reinauer@chromium.org>2013-03-13 17:03:04 -0700
committerRonald G. Minnich <rminnich@gmail.com>2013-03-14 04:54:21 +0100
commit7e568559634199668859b7c662aea7f6b41f3920 (patch)
treee8ae87d34a8768fb19a8289b1fa9232efa54d077 /src
parent5c0b7abe786d7b4370ed1dd7ef323a3091d9620c (diff)
downloadcoreboot-7e568559634199668859b7c662aea7f6b41f3920.tar.xz
Support ITE IT8518 embedded controller running Quanta's firmware
Change-Id: Ib406b9d5005243d79eea5d2c0c6c86b5aa949891 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2721 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Diffstat (limited to 'src')
-rw-r--r--src/ec/quanta/Kconfig1
-rw-r--r--src/ec/quanta/Makefile.inc1
-rw-r--r--src/ec/quanta/it8518/Kconfig4
-rw-r--r--src/ec/quanta/it8518/Makefile.inc4
-rw-r--r--src/ec/quanta/it8518/acpi/ac.asl38
-rw-r--r--src/ec/quanta/it8518/acpi/battery.asl353
-rw-r--r--src/ec/quanta/it8518/acpi/ec.asl665
-rw-r--r--src/ec/quanta/it8518/acpi/superio.asl90
-rw-r--r--src/ec/quanta/it8518/chip.h35
-rw-r--r--src/ec/quanta/it8518/ec.c208
-rw-r--r--src/ec/quanta/it8518/ec.h97
11 files changed, 1496 insertions, 0 deletions
diff --git a/src/ec/quanta/Kconfig b/src/ec/quanta/Kconfig
index f29ec00b83..00c3dbf10a 100644
--- a/src/ec/quanta/Kconfig
+++ b/src/ec/quanta/Kconfig
@@ -1 +1,2 @@
source src/ec/quanta/ene_kb3940q/Kconfig
+source src/ec/quanta/it8518/Kconfig
diff --git a/src/ec/quanta/Makefile.inc b/src/ec/quanta/Makefile.inc
index 1c39f22429..c128aec534 100644
--- a/src/ec/quanta/Makefile.inc
+++ b/src/ec/quanta/Makefile.inc
@@ -1 +1,2 @@
subdirs-$(CONFIG_EC_QUANTA_ENE_KB3940Q) += ene_kb3940q
+subdirs-$(CONFIG_EC_QUANTA_IT8518) += it8518
diff --git a/src/ec/quanta/it8518/Kconfig b/src/ec/quanta/it8518/Kconfig
new file mode 100644
index 0000000000..477e08533b
--- /dev/null
+++ b/src/ec/quanta/it8518/Kconfig
@@ -0,0 +1,4 @@
+config EC_QUANTA_IT8518
+ bool
+ help
+ Interface to QUANTA IT8518 Embedded Controller.
diff --git a/src/ec/quanta/it8518/Makefile.inc b/src/ec/quanta/it8518/Makefile.inc
new file mode 100644
index 0000000000..ccceb6f838
--- /dev/null
+++ b/src/ec/quanta/it8518/Makefile.inc
@@ -0,0 +1,4 @@
+romstage-y += ec.c
+ramstage-y += ec.c
+smm-y += ec.c
+smm-y += ../../../lib/delay.c
diff --git a/src/ec/quanta/it8518/acpi/ac.asl b/src/ec/quanta/it8518/acpi/ac.asl
new file mode 100644
index 0000000000..5e682ee230
--- /dev/null
+++ b/src/ec/quanta/it8518/acpi/ac.asl
@@ -0,0 +1,38 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+// Scope (EC0)
+
+Device (AC)
+{
+ Name (_HID, "ACPI0003")
+ Name (_PCL, Package () { \_SB })
+
+ Method (_PSR)
+ {
+ Store(ACPW, Local0)
+ Return(Local0)
+ }
+
+ Method (_STA)
+ {
+ Return (0x0F)
+ }
+}
diff --git a/src/ec/quanta/it8518/acpi/battery.asl b/src/ec/quanta/it8518/acpi/battery.asl
new file mode 100644
index 0000000000..1621b3694f
--- /dev/null
+++ b/src/ec/quanta/it8518/acpi/battery.asl
@@ -0,0 +1,353 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+// Scope (EC0)
+
+Device (BATX)
+{
+ Name (_HID, EISAID ("PNP0C0A"))
+ Name (_UID, 1)
+ Name (_PCL, Package () { \_SB })
+
+ //
+ // Indicator of BATX attach/detach
+ // Battery X Information
+ // Battery X Status
+ //
+ Name (BXST, Zero)
+
+ //
+ // Default Static Battery Information
+ //
+ Name (PBIF, Package()
+ {
+ 0, // 0: Power Unit
+ 0xFFFFFFFF, // 1: Design Capacity
+ 0xFFFFFFFF, // 2: Last Full Charge Capacity
+ 1, // 3: Battery Technology(Rechargable)
+ 10800, // 4: Design Voltage 10.8V
+ 0, // 5: Design capacity of warning
+ 0, // 6: Design capacity of low
+ 1, // 7: Battery capacity granularity 1
+ 1, // 8: Battery capacity granularity 2
+ "", // 9: Model Number
+ "", // 10: Serial Number
+ "", // 11: Battery Type
+ "" // 12: OEM Infomration
+ })
+
+ Name (PBST, Package ()
+ {
+ 0x00000000, // Battery State
+ 0xFFFFFFFF, // Battery Present Rate
+ 0xFFFFFFFF, // Battery Remaining Capacity
+ 0xFFFFFFFF, // Battery Present Voltage
+ })
+
+ // Workaround for full battery status, enabled by default
+ Name (BFWK, One)
+
+ // Method to enable full battery workaround
+ Method (BFWE)
+ {
+ Store (One, BFWK)
+ }
+
+ // Method to disable full battery workaround
+ Method (BFWD)
+ {
+ Store (Zero, BFWK)
+ }
+
+ // Method to wait for EC to be ready after changing the Battery Info ID
+ // Selector
+ Method (WAEC)
+ {
+ Store (20, Local0) // Timeout 100 msec
+ While (LEqual (HSID, Zero))
+ {
+ // EC Is not ready
+ Sleep (5)
+ Decrement (Local0)
+ If (LEqual (Local0, Zero))
+ {
+ Break
+ }
+ }
+ }
+
+ // Battery Slot Status
+ Method (_STA, 0, Serialized)
+ {
+ Store (MBTS, BXST)
+ If (BXST)
+ {
+ // Battery is present
+ Return (0x1F)
+ }
+ Else
+ {
+ Return (0x0F)
+ }
+ }
+
+ Method (_BIF, 0, Serialized)
+ {
+ // Update fields from EC
+
+ //
+ // Information ID 1 -
+ //
+ Store (One, HIID)
+ WAEC ()
+
+ //
+ // Power Unit
+ // SMART battery : 1 - 10mWh : 0 - mAh
+ // ACPI spec : 0 - mWh : 1 - mAh
+ //
+ Store(SBCM, Local7)
+ XOr (Local7, One, Index (PBIF, 0))
+
+ //
+ // Information ID 0 -
+ //
+ Store (Zero, HIID)
+ WAEC ()
+
+ //
+ // Last Full Charge Capacity
+ //
+ If (Local7)
+ {
+ Multiply (SBFC, 10, Index (PBIF, 2))
+ }
+ Else
+ {
+ Store (SBFC, Index (PBIF, 2))
+ }
+
+ //
+ // Information ID 2 -
+ //
+ Store (2, HIID)
+ WAEC ()
+
+ //
+ // Design capacity
+ //
+ If (Local7)
+ {
+ Multiply (SBDC, 10, Local0)
+ }
+ Else
+ {
+ Store (SBDC, Local0)
+ }
+ Store (Local0, Index(PBIF, One))
+
+ //
+ // Design capacity of High (5%)
+ // Design capacity of Low (1%)
+ //
+ Divide (Local0, 20, Local1, Index (PBIF, 5))
+ Divide (Local0, 100, Local1, Index (PBIF, 6))
+
+ //
+ // Design voltage
+ //
+ Store (SBDV, Index (PBIF, 4))
+
+ //
+ // Serial Number
+ //
+ Store (ToHexString (SBSN), Index (PBIF, 10))
+
+ //
+ // Information ID 4 -
+ //
+ Store (4, HIID)
+ WAEC ()
+
+ //
+ // Battery Type - Device Chemistry
+ //
+ Store (ToString (SBCH), Index (PBIF, 11))
+
+ //
+ // Information ID 5 -
+ //
+ Store (5, HIID)
+ WAEC ()
+
+ //
+ // OEM Information - Manufacturer Name
+ //
+ Store (ToString (SBMN), Index (PBIF, 12))
+
+ //
+ // Information ID 6 -
+ //
+ Store (6, HIID)
+ WAEC ()
+
+ //
+ // Model Number - Device Name
+ //
+ Store (ToString (SBDN), Index (PBIF, 9))
+
+ Return (PBIF)
+ }
+
+ Method (_BST, 0, Serialized)
+ {
+ // Update Battery First Used Date, if requested
+ If (BFUD)
+ {
+ // TODO: Handle First Used Date Request
+ //\BFUD()
+ }
+
+ //
+ // 0: BATTERY STATE
+ //
+ // bit 0 = discharging
+ // bit 1 = charging
+ // bit 2 = critical level
+ //
+
+ // Get battery state from EC
+ If (And (HB0S, 0x20))
+ {
+ Store (2, Local0)
+ }
+ Else
+ {
+ if (And (HB0S, 0x40))
+ {
+ Store (One, Local0)
+ }
+ Else
+ {
+ Store (Zero, Local0)
+ }
+ }
+
+ // Set critical flag if battery is empty
+ If (LEqual (And (HB0S, 0x0F), 0))
+ {
+ Or (Local0, 4, Local0)
+ }
+
+ Store (Zero, Local1)
+
+ // Check if AC is present
+ If (ACPW)
+ {
+ // Set only charging/discharging bits
+ And (Local0, 0x03, Local1)
+ }
+ Else
+ {
+ // Always discharging when on battery power
+ Store (One, Local1)
+ }
+
+ // Flag if the battery level is critical
+ And (Local0, 0x04, Local4)
+ Or (Local1, Local4, Local1)
+ Store (Local1, Index (PBST, 0))
+
+ //
+ // 1: BATTERY PRESENT RATE/CURRENT
+ //
+ Store (ECAC, Local1)
+ If (LGreaterEqual (Local1, 0x8000))
+ {
+ If (And (Local0, 1))
+ {
+ Subtract (0x10000, Local1, Local1)
+ }
+ Else
+ {
+ // Error
+ Store (Zero, Local1)
+ }
+ }
+ Else
+ {
+ If (LNot (AND (Local0, 2)))
+ {
+ // Battery is not charging
+ Store (Zero, Local1)
+ }
+ }
+
+ XOr (DerefOf (Index (PBIF, Zero)), One, Local6)
+
+ If (Local6)
+ {
+ Multiply (ECVO, Local1, Local1)
+ Divide (Local1, 1000, Local7, Local1)
+ }
+ Store (Local1, Index (PBST, One))
+
+ //
+ // 2: BATTERY REMAINING CAPACITY
+ //
+ // Get Power unit from the battery static information
+ // SMART battery : 1 - 10mWh : 0 - mAh
+ // ACPI spec : 0 - mWh : 1 - mAh
+ If (Local6)
+ {
+ Multiply (ECRC, 10, Local1)
+ }
+ Else
+ {
+ Store (ECRC, Local1)
+ }
+
+ If (LAnd (BFWK, LAnd (ACPW, LNot (Local0))))
+ {
+ // On AC power and battery is neither charging
+ // nor discharging. Linux expects a full battery
+ // to report same capacity as last full charge.
+ // https://bugzilla.kernel.org/show_bug.cgi?id=12632
+ // TODO: Is SBRS the "battery gas gauge"?
+ Store (SBRS, Local2)
+
+ // See if within ~3% of full
+ ShiftRight (Local2, 5, Local3)
+ If (LAnd (LGreater (Local1, Subtract (Local2, Local3)),
+ LLess (Local1, Add (Local2, Local3))))
+ {
+ Store (Local2, Local1)
+ }
+ }
+ Store (Local1, Index (PBST, 2))
+
+ //
+ // 3: BATTERY PRESENT VOLTAGE
+ //
+ Store (ECVO, Index (PBST, 3))
+
+ Return (PBST)
+ }
+}
diff --git a/src/ec/quanta/it8518/acpi/ec.asl b/src/ec/quanta/it8518/acpi/ec.asl
new file mode 100644
index 0000000000..7549fa283d
--- /dev/null
+++ b/src/ec/quanta/it8518/acpi/ec.asl
@@ -0,0 +1,665 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * The mainboard must define a PNOT method to handle power
+ * state notifications and Notify CPU device objects to
+ * re-evaluate their _PPC and _CST tables.
+ */
+
+Device (EC0)
+{
+ Name (_HID, EISAID ("PNP0C09"))
+ Name (_UID, 1)
+ Name (_GPE, Add(EC_SCI_GPI, 16)) // GPE for Runtime SCI
+
+ // EC RAM fields
+ OperationRegion(ERAM, EmbeddedControl, 0, 0xFF)
+ Field (ERAM, ByteAcc, NoLock, Preserve)
+ {
+ Offset(0x00), // [Configuration Space 0]
+ , 1, // Reserved bit[0]
+ ENGA, 1, // Enable Global attention
+ ENHY, 1, // Enable Hotkey function
+ HFNE, 1, // Enable Sticky Fn Key
+ DSEM, 1, // Disable embedded NumPad Emulation
+ EN3R, 1, // Enable 3rd Host interface and TWR registers
+ , 1, // Reserved bit[6]
+ ENTM, 1, // Enable Thermal monitoring
+
+ Offset(0x01), // [Configuration Space 1]
+ ENBK, 1, // Enable Panel backlight on/ off synchronized with LID state
+ , 3, // Reserved bits[1:3]
+ WPSW, 1, // Warning if the power switch is depressed
+ , 2, // Reserved bits[5:6]
+ NTKY, 1, // do not ignore any key while Fn key is held down
+
+ Offset(0x02), // [Configuration Space 2]
+ , 5, // Reserved bits[0:4]
+ SNLC, 1, // Smart NumLock Enable. 1:Enable 0:Disable
+ , 1, // Reserved bit[6]
+ TNKB, 1, // ThinkVantage button function bit
+ // 0: Scan code (Enter key)
+ // 1: SMI/SCI attention
+
+ Offset(0x03), // [Configuration Space 3]
+ DSHP, 1, // Disable to synchronize headphone state with the speaker mute
+ IGPK, 1, // Ignore phantom keys
+ , 2, // Reserved bits[2:3]
+ CBAT, 1, // Change discharge/charge preference to discharge primary battery first and charge secondary battery first if possible
+ ADO0, 1, // Audio button behavior mode 0
+ ADO1, 1, // Audio button behavior mode 1
+ , 1, // Enable to use PMH fan functions to get the fan speed
+
+ Offset(0x04), // [Sound Mask 0]
+ , 1, // reserved
+ CLBA, 1, // critical low battery alarm
+ LWBA, 1, // low battery alarm (YELLOW -> RED)
+ SUBE, 1, // suspend beep
+ PUBE, 1, // vm_suspend beep
+ RSBE, 1, // resume beep
+ DCBE, 1, // DC in/out beep
+ PFBE, 1, // power off beep
+
+ Offset(0x05), // [Sound Mask 1]
+ HSPA, 1, // power off alarm
+ NHDD, 1, // no HDD alarm
+ DEAD, 1, // dead
+ B440, 1, // 440 hz beep
+ B315, 1, // 315 hz beep
+ T315, 1, // two 315 hz beep
+ R315, 1, // three 315 hz beep
+ BYAM, 1, // inhibit swap
+
+ Offset(0x06), // [Sound ID (Write only)]
+ HSUN, 8, // Sound ID (Write Only)
+
+ Offset(0x07), // [Sound Repeat Interval (unit time 125ms)]
+ HSRP, 8, // Sound Repeat Interval (Unit time : 125ms )
+
+ Offset(0x08), // [Sound Mask 2]
+ Offset(0x09), // [KBD ID]
+ Offset(0x0A), // [KMC command control]
+ // Offset 0xOB : reserved
+
+ Offset(0x0C), // [LED On/Off/ Blinking Control (Write only)]
+ HLCL, 4, // 0: power LED
+ // 1: battery status 0
+ // 2: battery status 1
+ // 3: additional Bay LED (Venice) / reserved (Toronto-4) / Slicer LED (Tokyo)
+ // 4-6: reserved
+ // 7: suspend LED
+ // 8: dock LED 1
+ // 9: dock LED 2
+ // 10-13: reserved
+ // 14: microphone mute
+ // 15: reserved
+ , 1, // Reserved bit[4]
+ , 1, // Blink gradually
+ BLIK, 1, // Blinking
+ TONF, 1, // Turn on/off
+
+ Offset(0x0D), // [Peripheral control 3]
+ UONE, 1, // Bit0 - Enable to supply power through USB in S3, S4 and S5 state.
+ , 1, // Reserved bit[1]
+ , 1, // set USB_AO_SEL0 signal in S3, S4, and S5 state
+ , 1, // set USB_AO_SEL1 signal in S3, S4, and S5 state
+ , 4, // Reserved bits[4:7]
+
+ Offset(0x0E), // [Peripheral Status 4]
+ HFNS, 2, // Bit[1, 0] : Fn Key Status
+ // [0, 0] ... Unlock
+ // [0, 1] ... Sticky
+ // [1, 0] ... Lock
+ // [1, 1] ... Reserved
+ GSER, 1, // G-Sensor Diag Error. 1:Error / 0: No error
+ PSCS, 1, // Inhibit charging
+ , 1, // External power saving mode
+ GSUD, 1, // G-Sensor under Diag. 1: Diag is running/0: Diag comp(not running)
+ GSID, 2, // Bit[7,6] G-Sensor type ID
+ // [0,0] ... None
+ // [0,1] ... STMicro
+ // [1,0] ... Memsic
+ // [1,1] ... ADI
+
+ Offset(0x0F), // [Peripheral status 5 (read only)]
+ , 4, // Reserved bits[0:3]
+ HDSU, 1, // HDD was detached in suspend (this bit is cleared when the system enters into suspend)
+ BYSU, 1, // Bay HDD was detached in suspend (this bit is cleared when the system enters into suspend)
+ , 1, // NumLock state of the embedded keyboard
+ TMOD, 1, // Tablet mode switch
+
+ Offset(0x10), // [Attention Mask (00-127)]
+ HAM0, 8, // 10 : Attention Mask (00-07)
+ HAM1, 8, // 11 : Attention Mask (08-0F)
+ HAM2, 8, // 12 : Attention Mask (10-17)
+ HAM3, 8, // 13 : Attention Mask (18-1F)
+ HAM4, 8, // 14 : Attention Mask (20-27)
+ HAM5, 8, // 15 : Attention Mask (28-2F)
+ HAM6, 8, // 16 : Attention Mask (30-37)
+ HAM7, 8, // 17 : Attention Mask (38-3F)
+ HAM8, 8, // 18 : Attention Mask (40-47)
+ HAM9, 8, // 19 : Attention Mask (48-4F)
+ HAMA, 8, // 1A : Attention Mask (50-57)
+ HAMB, 8, // 1B : Attention Mask (58-5F)
+ HAMC, 8, // 1C : Attention Mask (60-67)
+ HAMD, 8, // 1D : Attention Mask (68-6F)
+ HAME, 8, // 1E : Attention Mask (70-77)
+ HAMF, 8, // 1F : Attention Mask (78-7F)
+
+ // Offset 0x20 : reserved
+ Offset(0x21), // [Inhibit Charge timer byte High (00h)] (timer is kicked when high byte is written)
+
+ Offset(0x23), // [Misc. control]
+ // 01h Reset charge inhibit
+ // 02h Inhibit to charge
+ // 03h Reset external power saving mode
+ // 04h Set to external power saving mode
+ // 09h Emulate pressing an eject button of optical device in the bay
+ // 0Ah Reset thermal state to control the fan
+ // 10h Start gravity sensor diagnostic program
+
+ // Offset 24-26 : reserved
+ Offset(0x27), // [Passward Scan Code]
+ // Offset 28-29 : reserved
+
+ Offset(0x2A), // [Attention Request]
+ HATR, 8, // 2A : Attention request
+
+ Offset(0x2B), // [Trip point of battery capacity]
+ HT0H, 8, // 2B : MSB of Trip Point Capacity for Battery 0
+ HT0L, 8, // 2C : LSB of Trip Point Capacity for Battery 0
+ HT1H, 8, // 2D : MSB of Trip Point Capacity for Battery 1
+ HT1L, 8, // 2E : LSB of Trip Point Capacity for Battery 1
+
+ Offset(0x2F), // [Fan Speed Control]
+ HFSP, 8, // bit 2-0: speed (0: stop, 7:highest speed)
+ // bit 5-3: reserved (should be 0)
+ // bit 6: max. speed
+ // bit 7: Automatic mode (fan speed controlled by thermal level)
+
+ Offset(0x30), // [Audio mute control]
+ , 7, // Reserved bits[0:6]
+ SMUT, 1, // Mute
+
+ Offset(0x31), // [Peripheral Control 2]
+ FANS, 2, // bit 0,1 Fan selector
+ // 00: Fan 1, 01: Fan 2
+ HUWB, 1, // UWB on
+ ENS4, 1, // Reserved bit[3]
+ DSEX, 1, // Disable Express Card
+ AYID, 1, // Always-on Card identified
+ , 1, // Select USB to Always On card
+ , 1, // Assert the express card slot power control standby signal
+
+ Offset(0x32), // [EC Event Mask 0]
+ HWPM, 1, // PME : Not used. PME# is connected to GPE directly.
+ HWLB, 1, // Critical Low Bat
+ HWLO, 1, // Lid Open
+ , 1, // Eject button
+ HWFN, 1, // FN key
+ , 1, // Portfino wake up
+ HWRI, 1, // Ring Indicator (UART)
+ HWBU, 1, // Bay Unlock
+
+ Offset(0x33), // [EC Event Mask 1]
+
+ Offset(0x34), // [Peripheral status 2 (read only)]
+ , 1, // Reserved bit[0]
+ , 1, // Beep is being sounded now
+ , 1, // SMBus is busy
+ , 1, // Reserved bit[3]
+ , 1, // Fan exists
+ , 1, // Gravity sensors exist
+ , 1, // Reserved bit[6]
+ HPLO, 1, // Power consumption warning
+
+ Offset(0x35), // [Peripheral status 3 (Read only)]
+ , 1, // Input devices (keyboard and mouse) are locked by password
+ , 1, // Input devices are frozen (input from devices are inhibited)
+ , 1, // Fan power on Reset is done
+ , 1, // Attention is disabled temporarily
+ , 1, // Fan error
+ , 2, // Reserved bit[5:6]
+ , 1, // Thermal sensor error
+
+ Offset(0x36), // [Copy register of EC Event Status (0x32)]
+ Offset(0x37), // [Copy register of EC Event Status (0x33)]
+
+ Offset(0x38), // [Battery 0 status (read only)]
+ HB0S, 7, // bit 3-0 level
+ // F: Unknown
+ // 2-n: battery level
+ // 1: low level
+ // 0: (critical low battery, suspend/ hibernate)
+ // bit 4 error
+ // bit 5 charge
+ // bit 6 discharge
+ MBTS, 1, // bit 7 battery attached
+
+ Offset(0x39), // [Battery 1 status (read only)]
+ // bit definition is the same as offset(0x38)
+
+ Offset(0x3A), // [Peripheral control 0]
+ MUTE, 1, // Mute
+ I2CS, 1, // I2C select ( 0:Dock EEPROM etc, 1:Thermal sensor etc )(Tokyo-2)
+ PWRF, 1, // Power off
+ WANO, 1, // H/W Override bit
+ // (enable to control wireless devices even if the global WAN disable switch is ON)
+ DCBD, 1, // Bluetooth On
+ DCWL, 1, // Wireless Lan On
+ DCWW, 1, // Wireless Wan On
+ , 1, // 2nd Battery Inhibit (Tokyo)
+
+ Offset(0x3B), // [Peripheral control 1]
+ SPKM, 1, // Speaker Mute
+ KBLH, 1, // Keyboard Light
+ , 1, // Reserved bit[2]
+ BTDH, 1, // Bluetooth detach
+ USBN, 1, // USB On
+ , 1, // Inhibit communication with battery 0
+ , 1, // Inhibit communication with battery 1
+ S3FG, 1, // Reserved bit[7]
+
+ Offset(0x3C), // [Resume reason (Read only)]
+ Offset(0x3D), // [Password Control byte]
+ Offset(0x3E), // [Password data (8 byte)~ offset:45h]
+
+ Offset(0x46), // [sense status 0]
+ FNKY, 1, // Fn key
+ , 1, // Reserved bit[1]
+ HPLD, 1, // LID open
+ PROF, 1, // Power off
+ ACPW, 1, // External power (AC status)
+ , 2, // Reserved bits[5:6]
+ CALR, 1, // LP mode (power consumption alert)
+
+ Offset(0x47), // [sense status 1]
+ HPBU, 1, // Bay Unlock
+ DKEV, 1, // Dock event
+ BYNO, 1, // Bay is not Attached
+ HDIB, 1, // HDD in the bay
+ , 4, // Reserved bits[4:7]
+
+ Offset(0x48), // [sense status 2]
+ HPHI, 1, // Head Phone In
+ GSTS, 1, // Global Wan Enable Switch
+ , 2, // Reserved bits[2:3]
+ EXGC, 1, // External Graphic Chip
+ DOKI, 1, // Dock attached
+ HDDT, 1, // HDD detect
+ , 1, // Reserved bit[7]
+
+ Offset(0x49), // [sense status 3]
+ // Offset 0x4A : reserved
+
+ Offset(0x4C), // [MSB of Event Timer]
+ ETHB, 8, // bit[14:0]=timer counter, bit[15], 0:ms, 1:sec
+
+ Offset(0x4D), // [LSB of Event Timer]
+ ETLB, 8, //
+
+ Offset(0x4E), // [EC Event Status 0]
+ Offset(0x4F), // [EC Event Status 1]
+
+ Offset(0x50), // [SMB_PRTCL (protocol register)]
+ SMPR, 8, // 00: Controller Not In use
+ // 01: reserved
+ // 02: Write Quick command
+ // 03: Read Quick command
+ // 04: Send Quick command
+ // 05: Receive Byte
+ // 06: Write Byte
+ // 07: Read Byte
+ // 08: Write Word
+ // 09: Read Word
+ // 0A: Write block
+
+ Offset(0x51), // [SMB_STS (status register)]
+ SMST, 8, // bits[0:4] Status
+ // bit[5] Reserved
+ // bit[6] Alarm Received
+ // bit[7] Done
+
+ Offset(0x52), // [SMB_ADDR (address register)]
+ SMAD, 8, //
+
+ Offset(0x53), // [SMB_CMD (Command register)]
+ SMCM, 8, //
+
+ Offset(0x54), // [SMB_DATA (Data Register (32 bytes))~ offset:73h]
+ SMD0, 100, //
+
+ Offset(0x74), // [SMB_BCNT (Block count register)]
+ BCNT, 8, //
+
+ Offset(0x75), // [SMB_ALRM_ADDR (Alarm address register)]
+ SMAA, 8, //
+
+ Offset(0x76), // [SMB_ALRM_DATA (Alarm data register (2 bytes))]
+ BATD, 16, //
+
+ Offset(0x78), // [Temperature of thermal sensor 0 (centigrade)]
+ TMP0, 8, // 78 : Temperature of thermal sensor 0
+ TMP1, 8, // 79 : Temperature of thermal sensor 1
+ TMP2, 8, // 7A : Temperature of thermal sensor 2
+ TMP3, 8, // 7B : Temperature of thermal sensor 3
+ TMP4, 8, // 7C : Temperature of thermal sensor 4
+ TMP5, 8, // 7D : Temperature of thermal sensor 5
+ TMP6, 8, // 7E : Temperature of thermal sensor 6
+ TMP7, 8, // 7F : Temperature of thermal sensor 7
+
+ // Offset 79-7F : reserved
+ Offset(0x80), // [Attention control byte]
+
+ Offset(0x81), // [Battery information ID for 0xA0-0xAF]
+ HIID, 8, // (this byte is depend on the interface, 62&66 and 1600&1604)
+
+ Offset(0x82), // [Fn Dual function - make time out time (100ms unit)]
+
+ Offset(0x83), // [Fn Dual function ID]
+ HFNI, 8, // 0: none
+ // 1-3: Reserved
+ // 4: ACPI Power
+ // 5: ACPI Sleep
+ // 6: ACPI Wake
+ // 7: Left Ctrl key
+
+ Offset(0x84), // [Fan Speed]
+ , 16, //
+ // (I/F Offset 3Bh bit5 => 0:Main Fan , 1:Second Fan)
+
+ Offset(0x86), // [password 0 - 7 status]
+ Offset(0x87), // [password 8 - 15 status]
+ Offset(0x88), // [Thermal Status of Level 0 (low)]
+ Offset(0x89), // [Thermal Status of Level 1 (middle)]
+ Offset(0x8A), // [Thermal Status of Level 2 (middle high)]
+ Offset(0x8B), // [Thermal Status of Level 3 (high)]
+ // Offset 0x8C : reserved
+
+ Offset(0x8D), // [Interval of polling Always-on cards in half minute]
+ HDAA, 3, // Warning Delay Period
+ HDAB, 3, // Stolen Delay Period
+ HDAC, 2, // Sensitivity
+
+ Offset(0x8E), // [Key-number assigned to the ThinkVantage button]
+ Offset(0x8F), // [EC Internal Use for Fan Duty Table Creation]
+ Offset(0x90), // [EC internal use]
+ Offset(0xA0), // [Battery Information Area]~ offset:0AFh
+ Offset(0xB0), // [Battery 0 charge start capacity]
+ Offset(0xB1), // [Battery 0 charge stop capacity]
+ Offset(0xB2), // [Battery 1 charge start capacity]
+ Offset(0xB3), // [Battery 1 charge stop capacity]
+
+ Offset(0xB4), // [Battery 0 control]
+ // 01h Stop refreshing the battery
+ // 02h Refresh the battery
+ // 07h Set long life span mode
+ // 08h Set long run time mode
+
+ Offset(0xB5), // [Battery 1 control]
+ // Offset B6-C7 : reserved
+
+ Offset(0xC8), // [Adaptive Thermal Management (ATM)]
+ ATMX, 8, // bit 7-4 - Thermal Table & bit 3-0 - Fan Speed Table
+
+ Offset(0xC9), // [Wattage of AC/DC]
+ AC65, 8, //
+
+ Offset(0xCA), // Reserved - but should be 0
+
+ Offset(0xCB), // [ATM configuration]
+ BFUD, 1, // bit 0 - Battery FUD Flag
+ , 7, // bit 1~7 - Reserved
+
+ Offset(0xCC), //
+ PWMH, 8, // CC : AC Power Consumption (MSB)
+ PWML, 8, // CD : AC Power Consumption (LSB) - unit: 100mW
+
+ Offset(0xCE), // [Configuration Space 4]
+ , 2, // Windows key mode
+ , 2, // Application key mode
+ , 1, // Swap the Fn key and the left Ctrl key
+ , 3, // Reserved bits[5:7]
+
+ Offset(0xCF), // [Configuration Space 5]
+ HSID, 8, // Hand shaking byte of system information ID
+
+ Offset(0xD0), // [EC Type]
+ // D1-DF : reserved
+
+ Offset(0xE0), // @@ Mapping to old EC RAM for battery information
+ ECRC, 16, // BAT1 Sys command [0] RC
+ ECAC, 16, // BAT1 Sys command [0] AV_I
+ ECVO, 16, // BAT1 Sys command [0] Voltage
+
+ // E1-E7 : reserved
+ Offset(0xE8), // [Version 0]
+ Offset(0xE9), // [Version 1]
+ Offset(0xEA), // [Machine ID]
+ Offset(0xEB), // [Function Specification Minor Version]
+ Offset(0xEC), // [EC capability 0]
+ Offset(0xED), // [EC capability 1]
+
+ Offset(0xEE), // [Highest battery level]
+ MBTH, 4, // bit 3-0: battery 0 highest level
+ SBTH, 4, // bit 7-4: battery 1 highest level
+ // note: if highest level is 0 or 0xF, it means not defined
+ // (in this case, use default hightest level, it is 6)
+
+ Offset(0xEF), // [EC Function Specification Major Version]
+ Offset(0xF0), // [Build ID]~ offset:0F7h
+
+ Offset(0xF8), // [Build Date (F8: MSB, F9:LSB)]
+ , 4, // bit 3-0: day(1-31)
+ , 4, // bit 7-4: month(1-12)
+ , 8, // bit 15-8: year(2000 base)
+
+ Offset(0xFA), // [Build Time (in 2seconds)]
+ // ex: when index FAh=5Ah and index FBh=ADh, Build Time is 5AADh .. 12:53:46
+
+ Offset(0xFC), // [reserved]~ offset:0FFh
+ } // End of ERAM
+
+ //
+ // Battery Information ID : 00/10
+ //
+ Field (ERAM, ByteAcc, NoLock, Preserve)
+ {
+ Offset(0xA0),
+ SBRC, 16, // Remaining Capacity
+ SBFC, 16, // Fully Charged Capacity
+ SBAE, 16, // Average Time To Empty
+ SBRS, 16, // Relative State Of Charge
+ SBAC, 16, // Average Current
+ SBVO, 16, // Voltage
+ SBAF, 16, // Average Time To Full
+ SBBS, 16, // Battery State
+ }
+
+ //
+ // Battery Information ID : 01/11
+ //
+ Field (ERAM, ByteAcc, NoLock, Preserve)
+ {
+ Offset(0xA0),
+ // Battery Mode(w)
+ , 15,
+ SBCM, 1, // bit 15 - CAPACITY_MODE
+ // 0: Report in mA/mAh ; 1: Enabled
+ SBMD, 16, // Manufacture Data
+ SBCC, 16, // Cycle Count
+ }
+
+ //
+ // Battery Information ID : 02/12
+ //
+ Field (ERAM, ByteAcc, NoLock, Preserve)
+ {
+ Offset(0xA0),
+ SBDC, 16, // Design Capacity
+ SBDV, 16, // Design Voltage
+ SBOM, 16, // Optional Mfg Function 1
+ SBSI, 16, // Specification Info
+ SBDT, 16, // Manufacture Date
+ SBSN, 16, // Serial Number
+ }
+
+ //
+ // Battery Information ID : 04/14
+ //
+ Field (ERAM, ByteAcc, NoLock, Preserve)
+ {
+ Offset(0xA0),
+ SBCH, 32, // Device Checmistory (string)
+ }
+
+ //
+ // Battery Information ID : 05/15
+ //
+ Field (ERAM, ByteAcc, NoLock, Preserve)
+ {
+ Offset(0xA0),
+ SBMN, 128, // Manufacture Name (s)
+ }
+
+ //
+ // Battery Information ID : 06/16
+ //
+ Field (ERAM, ByteAcc, NoLock, Preserve)
+ {
+ Offset(0xA0),
+ SBDN, 128, // Device Name (s)
+ }
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (ECMD, ResourceTemplate()
+ {
+ IO (Decode16, 0x62, 0x62, 0, 1)
+ IO (Decode16, 0x66, 0x66, 0, 1)
+ })
+ Return (ECMD)
+ }
+
+ Method (_REG, 2, NotSerialized)
+ {
+ // Initialize AC power state
+ Store (ACPW, \PWRS)
+
+ // Initialize LID switch state
+ Store (NOT(HPLD), \LIDS)
+
+ // Enable OS control of fan speed
+ // TODO Store (One, FCOS)
+
+ // Force a read of CPU temperature
+ // TODO Which temperature corresponds to the CPU?
+ Store (TMP0, Local0)
+ }
+
+/* Attention Codes
+ * 00h No Event
+ * 01h-0Fh Reserved for ACPI Events
+ * 10h-1Fh Hotkey Events
+ * 22h Critical Low Battery
+ * 23h Battery Empty
+ * 24h Trip Point Capacity Event for Battery 0
+ * 26h AC Adapter Attached
+ * 27h AC Adapter Detached
+ * 28h Power Off Switch Pressed
+ * 29h Power Off Switch Released
+ * 2Ah LID Open
+ * 2Bh LID Close
+ * 3Eh PME Event
+ * 40h Thermal Event
+ * 41h Global Wireless Enable Switch
+ * 43h Mute State Change
+ * 4Ah Battery 0 Attach/Detach
+ * 4Bh Battery 0 State Change
+ * 66h Mute Button
+ */
+
+ // Battery at critical low state
+ Method (_Q22)
+ {
+ If (MBTS)
+ {
+ Notify (BATX, 0x80)
+ }
+ }
+
+ // AC Power Connected
+ Method (_Q26, 0, NotSerialized)
+ {
+ Store (One, \PWRS)
+ Notify (AC, 0x80)
+ Notify (BATX, 0x80)
+ \PNOT ()
+ }
+
+ // AC Power Removed
+ Method (_Q27, 0, NotSerialized)
+ {
+ Store (Zero, \PWRS)
+ Notify (AC, 0x80)
+ \PNOT ()
+ }
+
+ // LID Open
+ Method (_Q2A)
+ {
+ Store (One, \LIDS)
+ Notify (\_SB.LID0, 0x80)
+ }
+
+ // LID Close (Suspend Trigger)
+ Method (_Q2B)
+ {
+ Store (Zero, \LIDS)
+ Notify (\_SB.LID0, 0x80)
+ }
+
+ // Battery Attach/Detach Event
+ Method (_Q4A)
+ {
+ Notify (BATX, 0x80)
+ Notify (BATX, 0x81)
+ \PNOT ()
+ }
+
+ // Battery State Change Event
+ Method (_Q4B)
+ {
+ Notify (BATX, 0x80)
+ }
+
+ // Global Wireless Disable/Enable Event
+ Method (_Q41, 0, NotSerialized)
+ {
+ IF (DCWL) //if Wlan exist
+ {
+ //TODO Store (WLAT, LANE)
+ }
+ }
+
+ #include "ac.asl"
+ #include "battery.asl"
+ // TODO #include "fan.asl"
+}
diff --git a/src/ec/quanta/it8518/acpi/superio.asl b/src/ec/quanta/it8518/acpi/superio.asl
new file mode 100644
index 0000000000..ca1c00918f
--- /dev/null
+++ b/src/ec/quanta/it8518/acpi/superio.asl
@@ -0,0 +1,90 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+// Scope is \_SB.PCI0.LPCB
+
+Device (SIO)
+{
+ Name (_UID, 0)
+ Name (_ADR, 0)
+
+#ifdef SIO_EC_ENABLE_PS2K
+ Device (PS2K) // Keyboard
+ {
+ Name (_UID, 0)
+ Name (_ADR, 0)
+ Name (_HID, EISAID("PNP0303"))
+ Name (_CID, EISAID("PNP030B"))
+
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0F)
+ }
+
+ Name (_CRS, ResourceTemplate()
+ {
+ FixedIO (0x60, 0x01)
+ FixedIO (0x64, 0x01)
+ IRQNoFlags () {1}
+ })
+
+ Name (_PRS, ResourceTemplate()
+ {
+ StartDependentFn (0, 0)
+ {
+ FixedIO (0x60, 0x01)
+ FixedIO (0x64, 0x01)
+ IRQNoFlags () {1}
+ }
+ EndDependentFn ()
+ })
+ }
+#endif
+
+#ifdef SIO_ENABLE_PS2M
+ Device (PS2M) // Mouse
+ {
+ Name (_HID, EISAID("PNP0F13"))
+
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0F)
+ }
+
+ Name (_CRS, ResourceTemplate()
+ {
+ FixedIO (0x60, 0x01)
+ FixedIO (0x64, 0x01)
+ IRQNoFlags () {12}
+ })
+
+ Name (_PRS, ResourceTemplate()
+ {
+ StartDependentFn (0, 0)
+ {
+ FixedIO (0x60, 0x01)
+ FixedIO (0x64, 0x01)
+ IRQNoFlags () {12}
+ }
+ EndDependentFn ()
+ })
+ }
+#endif
+
+}
diff --git a/src/ec/quanta/it8518/chip.h b/src/ec/quanta/it8518/chip.h
new file mode 100644
index 0000000000..cc7d3745a9
--- /dev/null
+++ b/src/ec/quanta/it8518/chip.h
@@ -0,0 +1,35 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _EC_QUANTA_IT8518_CHIP_H
+#define _EC_QUANTA_IT8518_CHIP_H
+
+#include <device/device.h>
+#include <pc80/keyboard.h>
+
+struct chip_operations;
+extern struct chip_operations ec_quanta_it8518_ops;
+
+struct ec_quanta_it8518_config {
+ struct pc_keyboard keyboard;
+};
+
+#endif /* _EC_QUANTA_IT8518_CHIP_H */
diff --git a/src/ec/quanta/it8518/ec.c b/src/ec/quanta/it8518/ec.c
new file mode 100644
index 0000000000..4798ceea55
--- /dev/null
+++ b/src/ec/quanta/it8518/ec.c
@@ -0,0 +1,208 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+
+
+#include <console/console.h>
+
+#ifndef __PRE_RAM__
+#include <device/device.h>
+#include <device/pnp.h>
+#endif
+
+#include <stdlib.h>
+#include <arch/io.h>
+#include <delay.h>
+#include "ec.h"
+#include "chip.h"
+
+/* helper functions from drivers/pc80/keyboard.c */
+static int input_buffer_empty(u16 status_reg)
+{
+ u32 timeout;
+ for(timeout = KBC_TIMEOUT_IN_MS; timeout && (inb(status_reg) & KBD_IBF);
+ timeout--) {
+ udelay(1000);;
+ }
+
+ if (!timeout) {
+ printk(BIOS_WARNING, "EC-IT8518 Unexpected input buffer full\n");
+ printk(BIOS_WARNING, " Status (0x%x): 0x%x\n", status_reg, inb(status_reg));
+ }
+ return !!timeout;
+}
+
+
+static int output_buffer_full(u16 status_reg)
+{
+ u32 timeout;
+ for(timeout = KBC_TIMEOUT_IN_MS; timeout && ((inb(status_reg)
+ & KBD_OBF) == 0); timeout--) {
+ udelay(1000);;
+ }
+
+ if (!timeout) {
+ printk(BIOS_INFO, "EC-IT8518 output buffer result timeout\n");
+ printk(BIOS_INFO, " Status (0x%x): 0x%x\n", status_reg, inb(status_reg));
+ }
+ return !!timeout;
+}
+
+
+
+/* The IT8518 60/64 EC registers are the same command/status IB/OB KBC pair.
+ * Check status from 64 port before each command.
+ *
+ * Ex. Get panel ID command C43/D77
+ * Check IBF empty. Then Write 0x43(CMD) to 0x64 Port
+ * Check IBF empty. Then Write 0x77(DATA) to 0x60 Port
+ * Check OBF set. Then Get Data(0x03:panel ID) from 0x60
+ * Different commands return may or may not respond and may have multiple
+ * bytes. Keep it simple for nor
+ */
+
+u8 ec_kbc_read_ob(void)
+{
+ if (!output_buffer_full(KBD_STATUS)) return 0;
+ return inb(KBD_DATA);
+}
+
+void ec_kbc_write_cmd(u8 cmd)
+{
+ if (!input_buffer_empty(KBD_STATUS)) return;
+ outb(cmd, KBD_COMMAND);
+}
+
+void ec_kbc_write_ib(u8 data)
+{
+ if (!input_buffer_empty(KBD_STATUS)) return;
+ outb(data, KBD_DATA);
+}
+
+
+/*
+ * These functions are for accessing the IT8518 device RAM space via 0x66/0x68
+ */
+
+u8 ec_read_ob(void)
+{
+ if (!output_buffer_full(EC_SC)) return 0;
+ return inb(EC_DATA);
+}
+
+void ec_write_cmd(u8 cmd)
+{
+ if (!input_buffer_empty(EC_SC)) return;
+ outb(cmd, EC_SC);
+}
+
+void ec_write_ib(u8 data)
+{
+ if (!input_buffer_empty(EC_SC)) return;
+ outb(data, EC_DATA);
+}
+
+u8 ec_read(u16 addr)
+{
+ ec_write_cmd(RD_EC);
+ ec_write_ib(addr);
+ return ec_read_ob();
+}
+
+void ec_write(u16 addr, u8 data)
+{
+ ec_write_cmd(WR_EC);
+ ec_write_ib(addr);
+ ec_write_ib(data);
+}
+
+#ifndef __PRE_RAM__
+
+u8 ec_it8518_get_event(void)
+{
+ u8 cmd = 0;
+ u8 status = inb(EC_SC);
+ if (status & SCI_EVT) {
+ ec_write_cmd(QR_EC);
+ cmd = ec_read_ob();
+ } else if ( status & SMI_EVT) {
+ ec_kbc_write_cmd(EC_KBD_SMI_EVENT);
+ cmd = ec_kbc_read_ob();
+ }
+ return cmd;
+}
+
+void ec_it8518_enable_wake_events(void)
+{
+ /*
+ * Set the bit in ECRAM that will enable the Lid switch as a wake source
+ */
+ u8 reg8 = ec_read(EC_WAKE_SRC_ENABLE);
+ ec_write(EC_WAKE_SRC_ENABLE, reg8 | EC_LID_WAKE_ENABLE);
+}
+
+#ifndef __SMM__
+static void it8518_init(device_t dev)
+{
+ struct ec_quanta_it8518_config *conf = dev->chip_info;
+
+
+ if (!dev->enabled)
+ return;
+
+ printk(BIOS_DEBUG, "Quanta IT8518: Initializing keyboard.\n");
+ pc_keyboard_init(&conf->keyboard);
+}
+
+
+static void it8518_read_resources(device_t dev)
+{
+ /* This function avoids an error on serial console. */
+}
+
+
+static void it8518_enable_resources(device_t dev)
+{
+ /* This function avoids an error on serial console. */
+}
+
+static struct device_operations ops = {
+ .init = it8518_init,
+ .read_resources = it8518_read_resources,
+ .enable_resources = it8518_enable_resources
+};
+
+static struct pnp_info pnp_dev_info[] = {
+ { &ops, 0, 0, { 0, 0 }, }
+};
+
+static void enable_dev(device_t dev)
+{
+ pnp_enable_devices(dev, &pnp_ops, ARRAY_SIZE(pnp_dev_info),
+ pnp_dev_info);
+}
+
+struct chip_operations ec_quanta_it8518_ops = {
+ CHIP_NAME("QUANTA IT8518 EC")
+ .enable_dev = enable_dev
+};
+#endif /* ! __SMM__ */
+#endif /* ! __PRE_RAM__ */
diff --git a/src/ec/quanta/it8518/ec.h b/src/ec/quanta/it8518/ec.h
new file mode 100644
index 0000000000..f3a2d382cc
--- /dev/null
+++ b/src/ec/quanta/it8518/ec.h
@@ -0,0 +1,97 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * EC communication interface for QUANTA IT8518 Embedded Controller.
+ */
+
+#ifndef _EC_QUANTA_IT8518_EC_H
+#define _EC_QUANTA_IT8518_EC_H
+
+#define EC_IO 0x100 /* Mainboard specific. Could be Kconfig option */
+#define EC_IO_HIGH EC_IO + 1
+#define EC_IO_LOW EC_IO + 2
+#define EC_IO_DATA EC_IO + 3
+
+/* Wait 400ms for keyboard controller answers */
+#define KBC_TIMEOUT_IN_MS 400
+
+// 60h/64h Command Interface
+#define KBD_DATA 0x60
+#define KBD_COMMAND 0x64
+#define KBD_STATUS 0x64
+#define KBD_IBF (1 << 1) // 1: input buffer full (data ready for ec)
+#define KBD_OBF (1 << 0) // 1: output buffer full (data ready for host)
+
+#define EC_KBD_SMI_EVENT 0xCD
+#define EC_KBD_CMD_UNMUTE 0xE8
+#define EC_KBD_CMD_MUTE 0xE9
+
+u8 ec_kbc_read_ob(void);
+void ec_kbc_write_cmd(u8 cmd);
+void ec_kbc_write_ib(u8 data);
+
+// 62h/66h Command Interface
+#define EC_DATA 0x62
+#define EC_SC 0x66 // Status & Control Register
+#define SMI_EVT (1 << 6) // 1: SMI event was triggered
+#define SCI_EVT (1 << 5) // 1: SCI event was triggered
+
+// EC Commands (defined in ec_function_spec v3.12)
+#define RD_EC 0x80
+#define WR_EC 0x81
+#define QR_EC 0x84
+
+#define EC_CMD_EXIT_BOOT_BLOCK 0x85
+#define EC_CMD_NOTIFY_ACPI_ENTER 0x86
+#define EC_CMD_NOTIFY_ACPI_EXIT 0x87
+#define EC_CMD_WARM_RESET 0x8C
+
+// ECRAM Offsets
+#define EC_PERIPH_CNTL_3 0x0D
+#define EC_USB_S3_EN 0x26
+#define EC_PERIPH_STAT_3 0x35
+#define EC_THERM_0 0x78
+#define EC_WAKE_SRC_ENABLE 0xBF
+#define EC_FW_VER 0xE8 // 2 Bytes
+#define EC_IF_MIN_VER 0xEB
+#define EC_STATUS_REG 0xEC
+#define EC_IF_MAJ_VER 0xEF
+#define EC_MBAT_STATUS 0x0138
+
+
+// EC 0.83b added status bits:
+// BIT0=EC in RO mode
+// BIT1=Recovery Key Sequence Detected
+#define EC_IN_RO_MODE 0x1
+#define EC_IN_RECOVERY_MODE 0x3
+
+// EC 0.86a added enable bit:
+#define EC_LID_WAKE_ENABLE 0x4
+
+u8 ec_read_ob(void);
+void ec_write_cmd(u8 cmd);
+void ec_write_ib(u8 data);
+
+u8 ec_read(u16 addr);
+void ec_write(u16 addr, u8 data);
+u8 ec_it8518_get_event(void);
+void ec_it8518_enable_wake_events(void);
+
+#endif /* _EC_QUANTA_IT8518_EC_H */