summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorBryantOu <Bryant.Ou.Q@gmail.com>2020-04-17 02:15:17 -0700
committerAndrey Petrov <andrey.petrov@gmail.com>2020-04-29 16:06:02 +0000
commitab90782e7220d188e916680da21b49a011208f3f (patch)
tree3574f4b6a6badf8e4f85c4a1a6d204d1075997d7 /src
parent60e0dc3919324ae7a5c3f2766790b0c76c39f25c (diff)
downloadcoreboot-ab90782e7220d188e916680da21b49a011208f3f.tar.xz
superio/aspeed/common: Add early configure functions
Add LPC read/write functions for access aspeed's memory, also create config data table to config memory and SIO. These functions are used at early stages to configure devices. Signed-off-by: Bryant Ou <Bryant.Ou.Q@gmail.com> Change-Id: Ib59c29a042b2c7bf196b8a5bd5218704d8075855 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40483 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src')
-rw-r--r--src/superio/aspeed/Makefile.inc2
-rw-r--r--src/superio/aspeed/common/aspeed.h488
-rw-r--r--src/superio/aspeed/common/early_config.c575
-rw-r--r--src/superio/aspeed/common/early_serial.c3
4 files changed, 1065 insertions, 3 deletions
diff --git a/src/superio/aspeed/Makefile.inc b/src/superio/aspeed/Makefile.inc
index 769334e8d8..2810c077c9 100644
--- a/src/superio/aspeed/Makefile.inc
+++ b/src/superio/aspeed/Makefile.inc
@@ -4,6 +4,8 @@
## include generic fintek pre-ram stage driver
romstage-$(CONFIG_SUPERIO_ASPEED_COMMON_PRE_RAM) += common/early_serial.c
bootblock-$(CONFIG_SUPERIO_ASPEED_COMMON_PRE_RAM) += common/early_serial.c
+bootblock-$(CONFIG_SUPERIO_ASPEED_COMMON_PRE_RAM) += common/early_config.c
+
subdirs-y += ast2400
subdirs-y += common
diff --git a/src/superio/aspeed/common/aspeed.h b/src/superio/aspeed/common/aspeed.h
index f77258912d..3094f1a91a 100644
--- a/src/superio/aspeed/common/aspeed.h
+++ b/src/superio/aspeed/common/aspeed.h
@@ -7,9 +7,497 @@
#include <device/pnp_type.h>
#include <stdint.h>
+/* AST2300/2400/2500/2600 use the same memory base */
+#define ASPEED_MEM_BASE1 0x1E6E0000
+#define ASPEED_MMC_BASE (ASPEED_MEM_BASE1)
+#define ASPEED_USB_BASE (ASPEED_MEM_BASE1 + 0x1000)
+#define ASPEED_SCU_BASE (ASPEED_MEM_BASE1 + 0x2000)
+#define ASPEED_HACE_BASE (ASPEED_MEM_BASE1 + 0x3000)
+#define ASPEED_JTAG_BASE (ASPEED_MEM_BASE1 + 0x4000)
+#define ASPEED_GFX_BASE (ASPEED_MEM_BASE1 + 0x6000)
+#define ASPEED_X_DMA_BASE (ASPEED_MEM_BASE1 + 0x7000)
+#define ASPEED_MCTP_BASE (ASPEED_MEM_BASE1 + 0x8000)
+#define ASPEED_ADC_BASE (ASPEED_MEM_BASE1 + 0x9000)
+#define ASPEED_LPC_PLUS_BASE (ASPEED_MEM_BASE1 + 0xC000)
+#define ASPEED_PCIE_BASE (ASPEED_MEM_BASE1 + 0xD000)
+#define ASPEED_ESPI_BASE (ASPEED_MEM_BASE1 + 0xE000)
+#define ASPEED_BAT_BASE (ASPEED_MEM_BASE1 + 0xF000)
+#define ASPEED_MEM_BASE2 0x1E780000
+#define ASPEED_GPIO_BASE (ASPEED_MEM_BASE2)
+#define ASPEED_RTC_BASE (ASPEED_MEM_BASE2 + 0x1000)
+#define ASPEED_TIMER_BASE (ASPEED_MEM_BASE2 + 0x2000)
+#define ASPEED_UART1_BASE (ASPEED_MEM_BASE2 + 0x3000)
+#define ASPEED_UART5_BASE (ASPEED_MEM_BASE2 + 0x4000)
+#define ASPEED_WDT_BASE (ASPEED_MEM_BASE2 + 0x5000)
+#define ASPEED_PWM_FAN_BASE (ASPEED_MEM_BASE2 + 0x6000)
+#define ASPEED_VUART_BASE (ASPEED_MEM_BASE2 + 0x7000)
+#define ASPEED_PUART_BASE (ASPEED_MEM_BASE2 + 0x8000)
+#define ASPEED_LPC_BASE (ASPEED_MEM_BASE2 + 0x9000)
+#define ASPEED_I2C_BASE (ASPEED_MEM_BASE2 + 0xA000)
+#define ASPEED_PECI_BASE (ASPEED_MEM_BASE2 + 0xB000)
+#define ASPEED_APB2PCI_BASE (ASPEED_MEM_BASE2 + 0xC000)
+#define ASPEED_UART2_BASE (ASPEED_MEM_BASE2 + 0xD000)
+#define ASPEED_UART3_BASE (ASPEED_MEM_BASE2 + 0xE000)
+#define ASPEED_UART4_BASE (ASPEED_MEM_BASE2 + 0xF000)
+
+/* System Control Unit */
+#define PRO_KEY_REG 0x00
+#define PRO_KEY_PASSWORD 0x1688A8A8
+#define SYS_RESET_CTL_REG 0x04
+#define CLK_SEL_REG 0x08
+#define CLK_STOP_CTL_REG 0x0C
+#define FRQ_CNT_CTL_REG 0x10
+#define FRQ_CNT_CMP_REG 0x14
+#define INT_CTL_STS_REG 0x18
+#define D2_PLL_PARM_REG 0x1C
+#define M_PLL_PARM_REG 0x20
+#define H_PLL_PARM_REG 0x24
+#define D_PLL_PARM_REG 0x28
+#define MISC_CTL_REG 0x2C
+#define PCI_CFG_SET_REG1 0x30
+#define PCI_CFG_SET_REG2 0x34
+#define PCI_CFG_SET_REG3 0x38
+#define SYS_RESET_CTL_STS_REG 0x3C
+#define VGA_FUNC_HANDSHAKE_REG1 0x40
+#define VGA_FUNC_HANDSHAKE_REG2 0x44
+#define MAC_CLK_DELAY_SET_REG 0x48
+#define MISC_2_CTL_REG 0x4C
+#define VGA_SCRATCH_REG1 0x50
+#define VGA_SCRATCH_REG2 0x54
+#define VGA_SCRATCH_REG3 0x58
+#define VGA_SCRATCH_REG4 0x5C
+#define VGA_SCRATCH_REG5 0x60
+#define VGA_SCRATCH_REG6 0x64
+#define VGA_SCRATCH_REG7 0x68
+#define VGA_SCRATCH_REG8 0x6C
+#define HW_STRAP_REG 0x70
+#define RAN_NUM_GEN_CTL_REG 0x74
+#define RAN_NUM_GEN_DATA_OUT_REG 0x78
+#define SILICON_REV_ID_REG 0x7C
+#define MUL_FUNC_PIN_CTL1_REG 0x80
+#define UART3_TXD3_EN_BIT 22
+#define UART3_RXD3_EN_BIT 23
+#define UART4_TXD4_EN_BIT 30
+#define UART4_RXD4_EN_BIT 31
+#define MUL_FUNC_PIN_CTL2_REG 0x84
+#define UART1_TXD1_EN_BIT 22
+#define UART1_RXD1_EN_BIT 23
+#define UART2_TXD2_EN_BIT 30
+#define UART2_RXD2_EN_BIT 31
+#define MUL_FUNC_PIN_CTL3_REG 0x88
+#define MUL_FUNC_PIN_CTL4_REG 0x8C
+#define MUL_FUNC_PIN_CTL5_REG 0x90
+#define MUL_FUNC_PIN_CTL6_REG 0x94
+#define DIGI_VIDEO_OUT_PINS_DIS 0
+#define DIGI_VIDEO_OUT_PINS_EN 1
+#define EXTRST_RESET_SEL_REG 0x9C
+#define MUL_FUNC_PIN_CTL7_REG 0xA0
+#define MUL_FUNC_PIN_CTL8_REG 0xA4
+#define MUL_FUNC_PIN_CTL9_REG 0xA8
+#define MUL_FUNC_PIN_CTL10_REG 0xAC
+#define MAC_CLK_DELAY_100M_REG 0xB8
+#define MAC_CLK_DELAY_10M_REG 0xBC
+#define PWR_SAVE_WAKEUP_EN_REG 0xC0
+#define PWR_SAVE_WAKEUP_CTL_REG 0xC4
+#define SYS_RESET_CTL_SET2_REG 0xD4
+#define CLK_SEL_SET2_REG 0xD8
+#define CLK_STOP_CTL_SET2_REG 0xDC
+#define SCU_FREE_RUN_CNT_READ_BACK_REG 0xE0
+#define SCU_FREE_RUN_CNT_EXT_READ_BACK_REG 0xE4
+#define CLK_DUTY_MEASURE_CTL_REG 0xE8
+#define CLK_DUTY_MEASURE_RESULT_REG 0xEC
+#define CPU2_CTL_REG 0x100
+#define CPU2_BASE_ADDR_SEG_REG1 0x104
+#define CPU2_BASE_ADDR_SEG_REG2 0x108
+#define CPU2_BASE_ADDR_SEG_REG3 0x10C
+#define CPU2_BASE_ADDR_SEG_REG4 0x110
+#define CPU2_BASE_ADDR_SEG_REG5 0x114
+#define CPU2_BASE_ADDR_SEG_REG6 0x118
+#define CPU2_BASE_ADDR_SEG_REG7 0x11C
+#define CPU2_BASE_ADDR_SEG_REG8 0x120
+#define CPU2_BASE_ADDR_SEG_REG9 0x124
+#define CPU2_CACHE_FUNC_CTL_REG 0x128
+#define D_PLL_EXT_PARM_REG1 0x130
+#define D_PLL_EXT_PARM_REG2 0x134
+#define D_PLL_EXT_PARM_REG3 0x138
+#define D2_PLL_EXT_PARM_REG1 0x13C
+#define D2_PLL_EXT_PARM_REG2 0x140
+#define D2_PLL_EXT_PARM_REG3 0x144
+#define EXT_PARM_M_H_PLL_REG 0x148
+#define CHIP_UNIQ_ID_L_REG 0x150
+#define CHIP_UNIQ_ID_H_REG 0x154
+#define GEN_UART_24M_H_PLL_REG 0x160
+#define PCIE_CFG_SET_CTL_REG 0x180
+#define BMC_MMIO_DECODE_SET_REG 0x184
+#define FIRST_RELO_CTL_DECODE_AREA_LOCA_REG 0x188
+#define SECOND_RELO_CTL_DECODE_AREA_LOCA_REG 0x18C
+#define MAILBOX_DECODE_AREA_LOCA_REG 0x190
+#define SHARED_SRAM_AREA_DECODE_LOCA_REG1 0x194
+#define SHARED_SRAM_AREA_DECODE_LOCA_REG2 0x198
+#define BMC_DEV_CLASS_CODE_REV_ID_REG 0x19C
+#define BMC_DEV_ID_REG 0x1A4
+#define CLK_DUTY_SEL_REG 0x1DC
+
+/* LPC Controller */
+#define HICR0_REG 0x00
+#define HICR1_REG 0x04
+#define HICR2_REG 0x08
+#define HICR3_REG 0x0C
+#define HICR4_REG 0x10
+#define LADR3H_REG 0x14
+#define LADR3L_REG 0x18
+#define LADR12H_REG 0x1C
+#define LADR12L_REG 0x20
+#define IDR1_REG 0x24
+#define IDR2_REG 0x28
+#define IDR3_REG 0x2C
+#define ODR1_REG 0x30
+#define ODR2_REG 0x34
+#define ODR3_REG 0x38
+#define STR1_REG 0x3C
+#define STR2_REG 0x40
+#define STR3_REG 0x44
+#define BTR0_REG 0x48
+#define BRT1_REG 0x4C
+#define BTCSR0_REG 0x50
+#define BTCSR1_REG 0x54
+#define BTCR_REG 0x58
+#define BTDTR_REG 0x5C
+#define BTIMSR_REG 0x60
+#define BTFVSR0_REG 0x64
+#define BTFVSR1_REG 0x68
+#define SIRQCR0_REG 0x70
+#define SIRQCR1_REG 0x74
+#define SIRQCR2_REG 0x78
+#define SIRQCR3_REG 0x7C
+#define HICR5_REG 0x80
+#define SNOOP_ADDR_EN 0
+#define HICR6_REG 0x84
+#define HICR7_REG 0x88
+#define HICR8_REG 0x8C
+#define SNPWADR_REG 0x90
+#define SNOOP_ADDR_PORT80 0x80
+#define SNPWDR_REG 0x94
+#define HICR9_REG 0x98
+#define HICRA_REG 0x9C
+#define LHCR0_REG 0xA0
+#define LHCR1_REG 0xA4
+#define LHCR2_REG 0xA8
+#define LHCR3_REG 0xAC
+#define LHCR4_REG 0xB0
+#define LHCR5_REG 0xB4
+#define LHCR6_REG 0xB8
+#define LHCR7_REG 0xBC
+#define LHCR8_REG 0xC0
+#define PCCR6_REG 0xC4
+#define LHCRA_REG 0xC8
+#define LHCRB_REG 0xCC
+#define PCCR4_REG 0xD0
+#define PCCR5_REG 0xD4
+#define HICRB_REG 0x100
+#define HICRC_REG 0x104
+#define HISR0_REG 0x108
+#define HISR1_REG 0x10C
+#define LADR4_REG 0x110
+#define IDR4_REG 0x114
+#define ODR4_REG 0x118
+#define STR4_REG 0x11C
+#define LSADR12_REG 0x120
+#define IDR5_REG 0x124
+#define ODR5_REG 0x12C
+#define PCCR0_REG 0x130
+#define PCCR1_REG 0x134
+#define PCCR2_REG 0x138
+#define PCCR3_REG 0x13C
+#define IBTCR0_REG 0x140
+#define IBTCR1_REG 0x144
+#define IBTCR2_REG 0x148
+#define IBTCR3_REG 0x14C
+#define IBTCR4_REG 0x150
+#define IBTCR5_REG 0x154
+#define IBTCR6_REG 0x158
+#define SRUART1_REG 0x160
+#define SRUART2_REG 0x164
+#define SRUART3_REG 0x168
+#define SRUART4_REG 0x16C
+#define SCR0SIO_REG 0x170
+#define SCR1SIO_REG 0x174
+#define SCR2SIO_REG 0x178
+#define SCR3SIO_REG 0x17C
+#define SWCR_03_00_REG 0x180
+#define SWCR_07_04_REG 0x184
+#define SWCR_0B_08_REG 0x188
+#define SWCR_0F_0C_REG 0x18C
+#define SWCR_13_10_REG 0x190
+#define SWCR_17_14_REG 0x194
+#define SWCR_1B_18_REG 0x198
+#define SWCR_1F_1C_REG 0x19C
+#define ACPI_E3_E0_REG 0x1A0
+#define ACPI_C1_C0_REG 0x1A4
+#define ACPI_B3_B0_REG 0x1A8
+#define ACPI_B7_B4_REG 0x1AC
+#define MBXDAT_0_REG 0x200
+#define MBXDAT_1_REG 0x204
+#define MBXDAT_2_REG 0x208
+#define MBXDAT_3_REG 0x20C
+#define MBXDAT_4_REG 0x210
+#define MBXDAT_5_REG 0x214
+#define MBXDAT_6_REG 0x218
+#define MBXDAT_7_REG 0x21C
+#define MBXDAT_8_REG 0x220
+#define MBXDAT_9_REG 0x224
+#define MBXDAT_A_REG 0x228
+#define MBXDAT_B_REG 0x22C
+#define MBXDAT_C_REG 0x230
+#define MBXDAT_D_REG 0x234
+#define MBXDAT_E_REG 0x238
+#define MBXDAT_F_REG 0x23C
+#define MBXSTS_0_REG 0x240
+#define MBXSTS_1_REG 0x244
+#define MBXBCR_REG 0x248
+#define MBXHCR_REG 0x24C
+#define MBXBIE_0_REG 0x250
+#define MBXBIE_1_REG 0x254
+#define MBXHIE_0_REG 0x258
+#define MBXHIE_1_REG 0x25C
+
+/* GPIO Controller */
+#define A_B_C_D_DATA_VALUE_REG 0x00
+#define A_B_C_D_DIRECTION_REG 0x04
+#define A_B_C_D_INT_EN_REG 0x08
+#define A_B_C_D_INT_SEN_T0_REG 0x0C
+#define A_B_C_D_INT_SEN_T1_REG 0x10
+#define A_B_C_D_INT_SEN_T2_REG 0x14
+#define A_B_C_D_INT_STS_REG 0x18
+#define A_B_C_D_RESET_TOLE_REG 0x1C
+#define E_F_G_H_DATA_VALUE_REG 0x20
+#define E_F_G_H_DIRECTION_REG 0x24
+#define E_F_G_H_INT_EN_REG 0x28
+#define E_F_G_H_INT_SEN_T0_REG 0x2C
+#define E_F_G_H_INT_SEN_T1_REG 0x30
+#define E_F_G_H_INT_SEN_T2_REG 0x34
+#define E_F_G_H_INT_STS_REG 0x38
+#define E_F_G_H_RESET_TOLE_REG 0x3C
+#define A_B_C_D_DEBOUNCE_SET_REG1 0x40
+#define A_B_C_D_DEBOUNCE_SET_REG2 0x44
+#define E_F_G_H_DEBOUNCE_SET_REG1 0x48
+#define E_F_G_H_DEBOUNCE_SET_REG2 0x4C
+#define DEBOUNCE_TIMER_SET_REG1 0x50
+#define DEBOUNCE_TIMER_SET_REG2 0x54
+#define DEBOUNCE_TIMER_SET_REG3 0x58
+#define A_B_C_D_CMD_SOURCE0_REG 0x60
+#define A_B_C_D_CMD_SOURCE1_REG 0x64
+#define E_F_G_H_CMD_SOURCE0_REG 0x68
+#define E_F_G_H_CMD_SOURCE1_REG 0x6C
+#define I_J_K_L_DATA_VALUE_REG 0x70
+#define I_J_K_L_DIRECTION_REG 0x74
+#define M_N_O_P_DATA_VALUE_REG 0x78
+#define M_N_O_P_DIRECTION_REG 0x7C
+#define Q_R_S_T_DATA_VALUE_REG 0x80
+#define Q_R_S_T_DIRECTION_REG 0x84
+#define U_V_W_X_DATA_VALUE_REG 0x88
+#define U_V_W_X_DIRECTION_REG 0x8C
+#define I_J_K_L_CMD_SOURCE0_REG 0x90
+#define I_J_K_L_CMD_SOURCE1_REG 0x94
+#define I_J_K_L_INT_EN_REG 0x98
+#define I_J_K_L_INT_SEN_T0_REG 0x9C
+#define I_J_K_L_INT_SEN_T1_REG 0xA0
+#define I_J_K_L_INT_SEN_T2_REG 0xA4
+#define I_J_K_L_INT_STS_REG 0xA8
+#define I_J_K_L_RESET_TOLE_REG 0xAC
+#define I_J_K_L_DEBOUNCE_SET_REG1 0xB0
+#define I_J_K_L_DEBOUNCE_SET_REG2 0xB4
+#define I_J_K_L_INPUT_MASK 0xB8
+#define A_B_C_D_DATA_READ_REG 0xC0
+#define E_F_G_H_DATA_READ_REG 0xC4
+#define I_J_K_L_DATA_READ_REG 0xC8
+#define M_N_O_P_DATA_READ_REG 0xCC
+#define Q_R_S_T_DATA_READ_REG 0xD0
+#define U_V_W_X_DATA_READ_REG 0xD4
+#define Y_Z_AA_AB_DATA_READ_REG 0xD8
+#define AC_DATA_READ_REG 0xDC
+#define M_N_O_P_CMD_SOURCE0_REG 0xE0
+#define M_N_O_P_CMD_SOURCE1_REG 0xE4
+#define M_N_O_P_INT_EN_REG 0xE8
+#define M_N_O_P_INT_SEN_T0_REG 0xEC
+#define M_N_O_P_INT_SEN_T1_REG 0xF0
+#define M_N_O_P_INT_SEN_T2_REG 0xF4
+#define M_N_O_P_INT_STS_REG 0xF8
+#define M_N_O_P_RESET_TOLE_REG 0xFC
+#define M_N_O_P_DEBOUNCE_SET_REG1 0x100
+#define M_N_O_P_DEBOUNCE_SET_REG2 0x104
+#define M_N_O_P_INPUT_MASK 0x108
+#define Q_R_S_T_CMD_SOURCE0_REG 0x110
+#define Q_R_S_T_CMD_SOURCE1_REG 0x114
+#define Q_R_S_T_INT_EN_REG 0x118
+#define Q_R_S_T_INT_SEN_T0_REG 0x11C
+#define Q_R_S_T_INT_SEN_T1_REG 0x120
+#define Q_R_S_T_INT_SEN_T2_REG 0x124
+#define Q_R_S_T_INT_STS_REG 0x128
+#define Q_R_S_T_RESET_TOLE_REG 0x12C
+#define Q_R_S_T_DEBOUNCE_SET_REG1 0x130
+#define Q_R_S_T_DEBOUNCE_SET_REG2 0x134
+#define Q_R_S_T_INPUT_MASK 0x138
+#define U_V_W_X_CMD_SOURCE0_REG 0x140
+#define U_V_W_X_CMD_SOURCE1_REG 0x144
+#define U_V_W_X_INT_EN_REG 0x148
+#define U_V_W_X_INT_SEN_T0_REG 0x14C
+#define U_V_W_X_INT_SEN_T1_REG 0x150
+#define U_V_W_X_INT_SEN_T2_REG 0x154
+#define U_V_W_X_INT_STS_REG 0x158
+#define U_V_W_X_RESET_TOLE_REG 0x15C
+#define U_V_W_X_DEBOUNCE_SET_REG1 0x160
+#define U_V_W_X_DEBOUNCE_SET_REG2 0x164
+#define U_V_W_X_INPUT_MASK 0x168
+#define Y_Z_AA_AB_CMD_SOURCE0_REG 0x170
+#define Y_Z_AA_AB_CMD_SOURCE1_REG 0x174
+#define Y_Z_AA_AB_INT_EN_REG 0x178
+#define Y_Z_AA_AB_INT_SEN_T0_REG 0x17C
+#define Y_Z_AA_AB_INT_SEN_T1_REG 0x180
+#define Y_Z_AA_AB_INT_SEN_T2_REG 0x184
+#define Y_Z_AA_AB_INT_STS_REG 0x188
+#define Y_Z_AA_AB_RESET_TOLE_REG 0x18C
+#define Y_Z_AA_AB_DEBOUNCE_SET_REG1 0x190
+#define Y_Z_AA_AB_DEBOUNCE_SET_REG2 0x194
+#define Y_Z_AA_AB_INPUT_MASK 0x198
+#define AC_CMD_SOURCE0_REG 0x1A0
+#define AC_CMD_SOURCE1_REG 0x1A4
+#define AC_INT_EN_REG 0x1A8
+#define AC_INT_SEN_T0_REG 0x1AC
+#define AC_INT_SEN_T1_REG 0x1B0
+#define AC_INT_SEN_T2_REG 0x1B4
+#define AC_INT_STS_REG 0x1B8
+#define AC_RESET_TOLE_REG 0x1BC
+#define AC_DEBOUNCE_SET_REG1 0x1C0
+#define AC_DEBOUNCE_SET_REG2 0x1C4
+#define AC_INPUT_MASK 0x1C8
+#define A_B_C_D_INPUT_MASK 0x1D0
+#define E_F_G_H_INPUT_MASK 0x1D4
+#define Y_Z_AA_AB_DATA_VALUE_REG 0x1E0
+#define Y_Z_AA_AB_DIRECTION_REG 0x1E4
+#define AC_DATA_VALUE_REG 0x1E8
+#define AC_DIRECTION_REG 0x1EC
+
+/* SuperIO Controller */
+#define LDN_ILPC2AHB 0xD
+#define LDN_SUART1 0x02
+#define LDN_SUART2 0x03
+#define LDN_SUART3 0x0B
+#define LDN_SUART4 0x0C
+#define LDN_SEL_REG 0x07
+#define ACT_REG 0x30
+#define ACTIVATE_VALUE 0x01
+#define DEACTIVATE_VALUE 0x00
+#define PORT80_GPIO_EN 0x80
+#define PORT80_GPIO_SEL_REG 0x38
+#define INV_GPIO_EN 0x80
+#define LPC2AHB_ADD0_REG 0xF0
+#define LPC2AHB_ADD1_REG 0xF1
+#define LPC2AHB_ADD2_REG 0xF2
+#define LPC2AHB_ADD3_REG 0xF3
+#define LPC2AHB_DAT0_REG 0xF4
+#define LPC2AHB_DAT1_REG 0xF5
+#define LPC2AHB_DAT2_REG 0xF6
+#define LPC2AHB_DAT3_REG 0xF7
+#define LPC2AHB_LEN_REG 0xF8
+#define LPC2AHB_1_BYTE 0x00
+#define LPC2AHB_2_BYTE 0x01
+#define LPC2AHB_4_BYTE 0x02
+#define LPC2AHB_RW_REG 0xFE
+
+#define ASPEED_ENTRY_KEY 0xA5
+#define ASPEED_EXIT_KEY 0xAA
+
+#define TO_BE_UPDATE 0
+#define AndMask32(HighBit, LowBit) ~((((uint32_t) 1 << (HighBit - LowBit + 1)) - 1) << LowBit)
+
+typedef enum {
+ GPIOA = 0,
+ GPIOB,
+ GPIOC,
+ GPIOD,
+ GPIOE,
+ GPIOF,
+ GPIOG,
+ GPIOH,
+ GPIOI,
+ GPIOJ,
+ GPIOK,
+ GPIOL,
+ GPIOM,
+ GPION,
+ GPIOO,
+ GPIOP,
+ GPIOQ,
+ GPIOR,
+ GPIOS,
+ GPIOT,
+ GPIOU,
+ GPIOV,
+ GPIOW,
+ GPIOX,
+ GPIOY,
+ GPIOZ,
+ GPIOAA,
+ GPIOAB,
+} gpio_group_sel;
+
+enum {
+ Step1 = 0,
+ Step2,
+ Step3,
+ Step4,
+ Step5,
+ Step6,
+ Step7,
+ Step8,
+ Step9,
+ Step10,
+ Step11,
+ Step12,
+ Step13,
+ Step14,
+ Step15,
+ Step16,
+ Step17,
+ Step18,
+ Step19,
+ Step20,
+};
+
+enum {
+ ARM = 0,
+ LPC,
+ CoprocessorCPU,
+ Reserved,
+};
+
+typedef enum {
+ SIO = 0,
+ MEM,
+ NOP,
+} config_type;
+
+typedef struct config_data {
+ config_type type;
+ uint32_t base;
+ uint16_t reg;
+ uint32_t and;
+ uint32_t or;
+} config_data;
+
void aspeed_enable_serial(pnp_devfn_t dev, uint16_t iobase);
+void aspeed_early_config(pnp_devfn_t dev, config_data *table, uint8_t count);
+
+/* Enable SuperIO feature which is described in ASPEED datasheet */
+void aspeed_enable_port80_direct_gpio(pnp_devfn_t dev, gpio_group_sel g);
+
+/* Enable UART multi-function pins which is described in ASPEED datasheet */
+void aspeed_enable_uart_pin(pnp_devfn_t dev);
void pnp_enter_conf_state(pnp_devfn_t dev);
void pnp_exit_conf_state(pnp_devfn_t dev);
+void lpc_read(uint8_t port, uint32_t addr, uint32_t *value);
+void lpc_write(uint8_t port, uint32_t addr, uint32_t data);
#endif /* SUPERIO_ASPEED_COMMON_ROMSTAGE_H */
diff --git a/src/superio/aspeed/common/early_config.c b/src/superio/aspeed/common/early_config.c
new file mode 100644
index 0000000000..8d425a0779
--- /dev/null
+++ b/src/superio/aspeed/common/early_config.c
@@ -0,0 +1,575 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* This file is part of the coreboot project. */
+
+#include <arch/io.h>
+#include <delay.h>
+#include <device/pnp_def.h>
+#include <device/pnp_ops.h>
+#include <stdint.h>
+#include <commonlib/helpers.h>
+#include "aspeed.h"
+
+void lpc_read(uint8_t port, uint32_t addr, uint32_t *value)
+{
+ uint32_t data = 0;
+ uint8_t tmp;
+ pnp_devfn_t dev = PNP_DEV(port, LDN_ILPC2AHB);
+
+ pnp_enter_conf_state(dev);
+ pnp_set_logical_device(dev);
+ pnp_set_enable(dev, 1);
+
+ /* Write Address */
+ pnp_write_config(dev, LPC2AHB_ADD0_REG, ((addr & 0xff000000) >> 24));
+ pnp_write_config(dev, LPC2AHB_ADD1_REG, ((addr & 0x00ff0000) >> 16));
+ pnp_write_config(dev, LPC2AHB_ADD2_REG, ((addr & 0x0000ff00) >> 8));
+ pnp_write_config(dev, LPC2AHB_ADD3_REG, (addr & 0x000000ff));
+
+ /* Write Mode */
+ tmp = pnp_read_config(dev, LPC2AHB_LEN_REG);
+ pnp_write_config(dev, LPC2AHB_LEN_REG, (tmp & 0xfc) | LPC2AHB_4_BYTE);
+
+ /* Fire the command */
+ outb(LPC2AHB_RW_REG, port);
+ tmp = inb(port + 1);
+
+ /* Get Data */
+ data |= (pnp_read_config(dev, LPC2AHB_DAT0_REG) << 24) |
+ (pnp_read_config(dev, LPC2AHB_DAT1_REG) << 16) |
+ (pnp_read_config(dev, LPC2AHB_DAT2_REG) << 8) |
+ pnp_read_config(dev, LPC2AHB_DAT3_REG);
+ *value = data;
+
+ pnp_set_enable(dev, 0);
+ pnp_exit_conf_state(dev);
+}
+
+void lpc_write(uint8_t port, uint32_t addr, uint32_t data)
+{
+ uint8_t tmp;
+ pnp_devfn_t dev = PNP_DEV(port, LDN_ILPC2AHB);
+
+ pnp_enter_conf_state(dev);
+ pnp_set_logical_device(dev);
+ pnp_set_enable(dev, 1);
+
+ /* Write Address */
+ pnp_write_config(dev, LPC2AHB_ADD0_REG, ((addr & 0xFF000000) >> 24));
+ pnp_write_config(dev, LPC2AHB_ADD1_REG, ((addr & 0x00FF0000) >> 16));
+ pnp_write_config(dev, LPC2AHB_ADD2_REG, ((addr & 0x0000FF00) >> 8));
+ pnp_write_config(dev, LPC2AHB_ADD3_REG, (addr & 0x000000FF));
+
+ /* Write Data */
+ pnp_write_config(dev, LPC2AHB_DAT0_REG, ((data & 0xFF000000) >> 24));
+ pnp_write_config(dev, LPC2AHB_DAT1_REG, ((data & 0x00FF0000) >> 16));
+ pnp_write_config(dev, LPC2AHB_DAT2_REG, ((data & 0x0000FF00) >> 8));
+ pnp_write_config(dev, LPC2AHB_DAT3_REG, (data & 0x000000FF));
+
+ /* Write Mode */
+ tmp = pnp_read_config(dev, LPC2AHB_LEN_REG);
+ pnp_write_config(dev, LPC2AHB_LEN_REG, (tmp & 0xfc) | LPC2AHB_4_BYTE);
+
+ /* Fire */
+ pnp_write_config(dev, LPC2AHB_RW_REG, 0xcf);
+
+ pnp_set_enable(dev, 0);
+ pnp_exit_conf_state(dev);
+}
+
+void aspeed_early_config(pnp_devfn_t dev, config_data *table, uint8_t count)
+{
+ uint8_t i, t, port;
+ uint32_t v, addr;
+ port = dev >> 8;
+ for (i = 0; i < count; i++) {
+ if (table[i].type == MEM) {
+ addr = (u32)(table[i].base | table[i].reg);
+ lpc_read(port, addr, &v);
+ v &= table[i].and;
+ v |= table[i].or;
+ lpc_write(port, addr, v);
+ } else if (table[i].type == SIO) {
+ pnp_enter_conf_state(dev);
+ pnp_set_logical_device(dev);
+ t = pnp_read_config(dev, ACT_REG) | ACTIVATE_VALUE;
+ pnp_write_config(dev, ACT_REG, t);
+ t = pnp_read_config(dev, (uint8_t)(table[i].reg));
+ t &= (uint8_t)(table[i].and);
+ t |= (uint8_t)(table[i].or);
+ pnp_write_config(dev, (uint8_t)(table[i].reg), t);
+ pnp_set_logical_device(dev);
+ t = pnp_read_config(dev, ACT_REG) & ~ACTIVATE_VALUE;
+ pnp_write_config(dev, ACT_REG, t);
+ pnp_exit_conf_state(dev);
+ }
+ }
+}
+
+void aspeed_enable_port80_direct_gpio(pnp_devfn_t dev, gpio_group_sel g)
+{
+ struct config_data port80[] = {
+ /* Set command source 0 */
+ [Step1] = {
+ .type = MEM,
+ .base = ASPEED_GPIO_BASE,
+ .reg = TO_BE_UPDATE,
+ .and = AndMask32((g % 4) * 8, (g % 4) * 8),
+ .or = (LPC & 0x01) << ((g % 4) * 8)
+ },
+ /* Set command source 1 */
+ [Step2] = {
+ .type = MEM,
+ .base = ASPEED_GPIO_BASE,
+ .reg = TO_BE_UPDATE,
+ .and = AndMask32((g % 4) * 8, (g % 4) * 8),
+ .or = (LPC & 0x02) << ((g % 4) * 8)
+ },
+ /* Unlock SCU registers */
+ [Step3] = {
+ .type = MEM,
+ .base = ASPEED_SCU_BASE,
+ .reg = PRO_KEY_REG,
+ .and = 0,
+ .or = PRO_KEY_PASSWORD
+ },
+ /* Program multi-function to GPIO */
+ [Step4] = {
+ .type = MEM,
+ .base = ASPEED_SCU_BASE,
+ .reg = TO_BE_UPDATE,
+ .and = TO_BE_UPDATE,
+ .or = TO_BE_UPDATE
+ },
+ [Step5] = {
+ .type = MEM,
+ .base = ASPEED_SCU_BASE,
+ .reg = TO_BE_UPDATE,
+ .and = TO_BE_UPDATE,
+ .or = TO_BE_UPDATE
+ },
+ [Step6] = {
+ .type = MEM,
+ .base = ASPEED_SCU_BASE,
+ .reg = TO_BE_UPDATE,
+ .and = TO_BE_UPDATE,
+ .or = TO_BE_UPDATE
+ },
+ [Step7] = {
+ .type = MEM,
+ .base = ASPEED_SCU_BASE,
+ .reg = TO_BE_UPDATE,
+ .and = TO_BE_UPDATE,
+ .or = TO_BE_UPDATE
+ },
+ /* Program GPIO as output */
+ [Step8] = {
+ .type = MEM,
+ .base = ASPEED_GPIO_BASE,
+ .reg = TO_BE_UPDATE,
+ .and = AndMask32((((g % 4) + 1) * 8) - 1, (g % 4) * 8),
+ .or = 0xFF << ((g % 4) * 8)
+ },
+ /* Set snooping address#0 as 80h */
+ [Step9] = {
+ .type = MEM,
+ .base = ASPEED_LPC_BASE,
+ .reg = SNPWADR_REG,
+ .and = AndMask32(15, 0),
+ .or = SNOOP_ADDR_PORT80
+ },
+ /* Enable snooping address#0 */
+ [Step10] = {
+ .type = MEM,
+ .base = ASPEED_LPC_BASE,
+ .reg = HICR5_REG,
+ .and = AndMask32(0, 0),
+ .or = 1 << SNOOP_ADDR_EN
+ },
+ /* Lock SCU registers */
+ [Step11] = {
+ .type = MEM,
+ .base = ASPEED_SCU_BASE,
+ .reg = PRO_KEY_REG,
+ .and = 0,
+ .or = 0
+ },
+ /* Select group for port80 GPIO */
+ [Step12] = {
+ .type = SIO,
+ .base = 0,
+ .reg = PORT80_GPIO_SEL_REG,
+ .and = AndMask32(4, 0),
+ .or = g
+ },
+ /* Enable port80 GPIO */
+ [Step13] = {
+ .type = SIO,
+ .base = 0,
+ .reg = ACT_REG,
+ .and = AndMask32(8, 8),
+ .or = PORT80_GPIO_EN
+ },
+ };
+
+ switch (g) {
+ case GPIOA:
+ case GPIOB:
+ case GPIOC:
+ case GPIOD:
+ port80[Step1].reg = A_B_C_D_CMD_SOURCE0_REG;
+ port80[Step2].reg = A_B_C_D_CMD_SOURCE1_REG;
+ port80[Step8].reg = A_B_C_D_DIRECTION_REG;
+ break;
+ case GPIOE:
+ case GPIOF:
+ case GPIOG:
+ case GPIOH:
+ port80[Step1].reg = E_F_G_H_CMD_SOURCE0_REG;
+ port80[Step2].reg = E_F_G_H_CMD_SOURCE1_REG;
+ port80[Step8].reg = E_F_G_H_DIRECTION_REG;
+ break;
+ case GPIOI:
+ case GPIOJ:
+ case GPIOK:
+ case GPIOL:
+ port80[Step1].reg = I_J_K_L_CMD_SOURCE0_REG;
+ port80[Step2].reg = I_J_K_L_CMD_SOURCE1_REG;
+ port80[Step8].reg = I_J_K_L_DIRECTION_REG;
+ break;
+ case GPIOM:
+ case GPION:
+ case GPIOO:
+ case GPIOP:
+ port80[Step1].reg = M_N_O_P_CMD_SOURCE0_REG;
+ port80[Step2].reg = M_N_O_P_CMD_SOURCE1_REG;
+ port80[Step8].reg = M_N_O_P_DIRECTION_REG;
+ break;
+ case GPIOQ:
+ case GPIOR:
+ case GPIOS:
+ case GPIOT:
+ port80[Step1].reg = Q_R_S_T_CMD_SOURCE0_REG;
+ port80[Step2].reg = Q_R_S_T_CMD_SOURCE1_REG;
+ port80[Step8].reg = Q_R_S_T_DIRECTION_REG;
+ break;
+ case GPIOU:
+ case GPIOV:
+ case GPIOW:
+ case GPIOX:
+ port80[Step1].reg = U_V_W_X_CMD_SOURCE0_REG;
+ port80[Step2].reg = U_V_W_X_CMD_SOURCE1_REG;
+ port80[Step8].reg = U_V_W_X_DIRECTION_REG;
+ break;
+ case GPIOY:
+ case GPIOZ:
+ case GPIOAA:
+ case GPIOAB:
+ port80[Step1].reg = Y_Z_AA_AB_CMD_SOURCE0_REG;
+ port80[Step2].reg = Y_Z_AA_AB_CMD_SOURCE1_REG;
+ port80[Step8].reg = Y_Z_AA_AB_DIRECTION_REG;
+ break;
+ }
+
+ switch (g) {
+ case GPIOA:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL1_REG;
+ port80[Step4].and = AndMask32(7, 0) & AndMask32(15, 15);
+ port80[Step5].reg = MUL_FUNC_PIN_CTL4_REG;
+ port80[Step5].and = AndMask32(6, 6) & AndMask32(2, 2) & AndMask32(22, 22);
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOB:
+ port80[Step4].reg = HW_STRAP_REG;
+ port80[Step4].and = AndMask32(23, 23);
+ port80[Step5].reg = MUL_FUNC_PIN_CTL1_REG;
+ port80[Step5].and = AndMask32(14, 13);
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOC:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL5_REG;
+ port80[Step4].and = AndMask32(0, 0);
+ port80[Step5].reg = MUL_FUNC_PIN_CTL5_REG;
+ port80[Step5].and = AndMask32(26, 23);
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOD:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL5_REG;
+ port80[Step4].and = AndMask32(1, 1);
+ port80[Step5].reg = MUL_FUNC_PIN_CTL4_REG;
+ port80[Step5].and = AndMask32(11, 8);
+ port80[Step6].reg = HW_STRAP_REG;
+ port80[Step6].and = AndMask32(21, 21);
+ port80[Step7].type = NOP;
+ break;
+ case GPIOE:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL1_REG;
+ port80[Step4].and = AndMask32(23, 16);
+ port80[Step5].reg = MUL_FUNC_PIN_CTL4_REG;
+ port80[Step5].and = AndMask32(15, 12);
+ port80[Step6].reg = HW_STRAP_REG;
+ port80[Step6].and = AndMask32(22, 22);
+ port80[Step7].type = NOP;
+ break;
+ case GPIOF:
+ port80[Step4].base = ASPEED_LPC_BASE;
+ port80[Step4].reg = LHCR0_REG;
+ port80[Step4].and = AndMask32(0, 0);
+ port80[Step5].reg = MUL_FUNC_PIN_CTL1_REG;
+ port80[Step5].and = AndMask32(31, 24);
+ port80[Step6].reg = MUL_FUNC_PIN_CTL5_REG;
+ port80[Step6].and = AndMask32(30, 30);
+ port80[Step7].type = NOP;
+ break;
+ case GPIOG:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL5_REG;
+ port80[Step4].and = AndMask32(6, 6);
+ port80[Step5].reg = MUL_FUNC_PIN_CTL2_REG;
+ port80[Step5].and = AndMask32(7, 0);
+ port80[Step6].reg = MUL_FUNC_PIN_CTL6_REG;
+ port80[Step6].and = AndMask32(12, 12);
+ port80[Step7].type = NOP;
+ break;
+ case GPIOH:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL5_REG;
+ port80[Step4].and = AndMask32(7, 6);
+ port80[Step5].reg = FRQ_CNT_CTL_REG;
+ port80[Step5].and = AndMask32(8, 8);
+ port80[Step6].reg = MUL_FUNC_PIN_CTL6_REG;
+ port80[Step6].and = AndMask32(7, 5);
+ port80[Step7].type = NOP;
+ break;
+ case GPIOI:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL5_REG;
+ port80[Step4].and = AndMask32(6, 6);
+ port80[Step5].reg = HW_STRAP_REG;
+ port80[Step5].and = AndMask32(13, 12) & AndMask32(5, 5);
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOJ:
+ port80[Step4].reg = FRQ_CNT_CTL_REG;
+ port80[Step4].and = AndMask32(8, 8);
+ port80[Step5].reg = MUL_FUNC_PIN_CTL2_REG;
+ port80[Step5].and = AndMask32(15, 8);
+ port80[Step6].reg = MUL_FUNC_PIN_CTL6_REG;
+ port80[Step6].and = AndMask32(8, 8);
+ port80[Step7].type = NOP;
+ break;
+ case GPIOK:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL5_REG;
+ port80[Step4].and = AndMask32(21, 18);
+ port80[Step5].type = NOP;
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOL:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL2_REG;
+ port80[Step4].and = AndMask32(23, 16);
+ port80[Step5].type = NOP;
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOM:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL2_REG;
+ port80[Step4].and = AndMask32(31, 24);
+ port80[Step5].type = NOP;
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPION:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL3_REG;
+ port80[Step4].and = AndMask32(7, 0);
+ port80[Step5].type = NOP;
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOO:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL3_REG;
+ port80[Step4].and = AndMask32(15, 8);
+ port80[Step5].reg = MUL_FUNC_PIN_CTL5_REG;
+ port80[Step5].and = AndMask32(5, 5) & AndMask32(5, 4);
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOP:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL3_REG;
+ port80[Step4].and = AndMask32(23, 16);
+ port80[Step5].reg = MUL_FUNC_PIN_CTL5_REG;
+ port80[Step5].and = AndMask32(5, 5) & AndMask32(5, 4) & AndMask32(28, 28);
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOQ:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL5_REG;
+ port80[Step4].and = AndMask32(17, 16) & AndMask32(27, 27);
+ port80[Step5].reg = MISC_CTL_REG;
+ port80[Step5].and = AndMask32(1, 1) & AndMask32(29, 29);
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOR:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL3_REG;
+ port80[Step4].and = AndMask32(31, 24);
+ port80[Step5].type = NOP;
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOS:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL4_REG;
+ port80[Step4].and = AndMask32(7, 0);
+ port80[Step5].reg = MUL_FUNC_PIN_CTL6_REG;
+ port80[Step5].and = AndMask32(1, 0);
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOT:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL7_REG;
+ port80[Step4].and = AndMask32(7, 0);
+ port80[Step4].or = ~AndMask32(7, 0);
+ port80[Step5].type = NOP;
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOU:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL7_REG;
+ port80[Step4].and = AndMask32(15, 8);
+ port80[Step4].or = ~AndMask32(15, 8);
+ port80[Step5].type = NOP;
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOV:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL7_REG;
+ port80[Step4].and = AndMask32(23, 16);
+ port80[Step4].or = ~AndMask32(23, 16);
+ port80[Step5].type = NOP;
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOW:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL7_REG;
+ port80[Step4].and = AndMask32(31, 24);
+ port80[Step4].or = ~AndMask32(31, 24);
+ port80[Step5].type = NOP;
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOX:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL8_REG;
+ port80[Step4].and = AndMask32(7, 0);
+ port80[Step4].or = ~AndMask32(7, 0);
+ port80[Step5].type = NOP;
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOY:
+ port80[Step4].reg = HW_STRAP_REG;
+ port80[Step4].and = AndMask32(19, 19);
+ port80[Step5].reg = MUL_FUNC_PIN_CTL8_REG;
+ port80[Step5].and = AndMask32(15, 8);
+ port80[Step6].reg = MUL_FUNC_PIN_CTL6_REG;
+ port80[Step6].and = AndMask32(11, 10);
+ port80[Step7].type = NOP;
+ break;
+ case GPIOZ:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL5_REG;
+ port80[Step4].and = AndMask32(31, 31);
+ port80[Step5].reg = MUL_FUNC_PIN_CTL8_REG;
+ port80[Step5].and = AndMask32(23, 16);
+ port80[Step6].reg = MUL_FUNC_PIN_CTL6_REG;
+ port80[Step6].and = AndMask32(1, 0);
+ port80[Step6].reg = HW_STRAP_REG;
+ port80[Step6].and = AndMask32(19, 19);
+ break;
+ case GPIOAA:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL5_REG;
+ port80[Step4].and = AndMask32(31, 31);
+ port80[Step5].reg = MUL_FUNC_PIN_CTL8_REG;
+ port80[Step5].and = AndMask32(31, 24);
+ port80[Step6].type = NOP;
+ port80[Step7].type = NOP;
+ break;
+ case GPIOAB:
+ port80[Step4].reg = MUL_FUNC_PIN_CTL5_REG;
+ port80[Step4].and = AndMask32(31, 31);
+ port80[Step5].reg = MUL_FUNC_PIN_CTL9_REG;
+ port80[Step5].and = AndMask32(3, 0);
+ port80[Step6].reg = MUL_FUNC_PIN_CTL6_REG;
+ port80[Step6].and = AndMask32(1, 0);
+ port80[Step7].type = NOP;
+ break;
+ default:
+ return;
+ }
+
+ aspeed_early_config(dev, port80, ARRAY_SIZE(port80));
+}
+
+void aspeed_enable_uart_pin(pnp_devfn_t dev)
+{
+ struct config_data uart[] = {
+ /* Unlock SCU registers */
+ [Step1] = {
+ .type = MEM,
+ .base = ASPEED_SCU_BASE,
+ .reg = PRO_KEY_REG,
+ .and = 0,
+ .or = PRO_KEY_PASSWORD
+ },
+ /* Enable UART function pin */
+ [Step2] = {
+ .type = MEM,
+ .base = ASPEED_SCU_BASE,
+ .reg = TO_BE_UPDATE,
+ .and = TO_BE_UPDATE,
+ .or = TO_BE_UPDATE
+ },
+ [Step3] = {
+ .type = MEM,
+ .base = ASPEED_SCU_BASE,
+ .reg = MUL_FUNC_PIN_CTL6_REG,
+ .and = AndMask32(1, 0),
+ .or = DIGI_VIDEO_OUT_PINS_DIS
+ },
+ /* Lock SCU registers */
+ [Step4] = {
+ .type = MEM,
+ .base = ASPEED_SCU_BASE,
+ .reg = PRO_KEY_REG,
+ .and = 0,
+ .or = 0
+ },
+ };
+
+ switch (dev & 0xff) {
+ case LDN_SUART1:
+ uart[Step2].reg = MUL_FUNC_PIN_CTL2_REG;
+ uart[Step2].and = AndMask32(23, 22);
+ uart[Step2].or = (1 << UART1_TXD1_EN_BIT) | (1 << UART1_RXD1_EN_BIT);
+ break;
+ case LDN_SUART2:
+ uart[Step2].reg = MUL_FUNC_PIN_CTL2_REG;
+ uart[Step2].and = AndMask32(31, 30);
+ uart[Step2].or = (1 << UART2_TXD2_EN_BIT) | (1 << UART2_RXD2_EN_BIT);
+ break;
+ case LDN_SUART3:
+ uart[Step2].reg = MUL_FUNC_PIN_CTL1_REG;
+ uart[Step2].and = AndMask32(23, 22);
+ uart[Step2].or = (1 << UART3_TXD3_EN_BIT) | (1 << UART3_RXD3_EN_BIT);
+ uart[Step3].type = NOP;
+ break;
+ case LDN_SUART4:
+ uart[Step2].reg = MUL_FUNC_PIN_CTL1_REG;
+ uart[Step2].and = AndMask32(31, 30);
+ uart[Step2].or = (1 << UART4_TXD4_EN_BIT) | (1 << UART4_RXD4_EN_BIT);
+ uart[Step3].type = NOP;
+ break;
+ default:
+ return;
+ }
+
+ aspeed_early_config(dev, uart, ARRAY_SIZE(uart));
+}
diff --git a/src/superio/aspeed/common/early_serial.c b/src/superio/aspeed/common/early_serial.c
index 086e9ddf1a..4051fd522a 100644
--- a/src/superio/aspeed/common/early_serial.c
+++ b/src/superio/aspeed/common/early_serial.c
@@ -27,9 +27,6 @@
#include <stdint.h>
#include "aspeed.h"
-#define ASPEED_ENTRY_KEY 0xA5
-#define ASPEED_EXIT_KEY 0xAA
-
/* Enable configuration: pass entry key '0xA5' into index port dev. */
void pnp_enter_conf_state(pnp_devfn_t dev)
{