diff options
author | Greg Watson <jarrah@users.sourceforge.net> | 2004-02-08 20:17:01 +0000 |
---|---|---|
committer | Greg Watson <jarrah@users.sourceforge.net> | 2004-02-08 20:17:01 +0000 |
commit | c34d5ca790c5cad0c6366122b56fd8da02c5794a (patch) | |
tree | ab0fddd0866b4065b0a31c8abc4ac52fe6a373d5 /src | |
parent | bd8e17a8f16846bb35a6a2fd07720a5b087e92d8 (diff) | |
download | coreboot-c34d5ca790c5cad0c6366122b56fd8da02c5794a.tar.xz |
*** empty log message ***
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1370 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
-rw-r--r-- | src/northbridge/motorola/mpc107/meminfo.c | 2 | ||||
-rw-r--r-- | src/northbridge/motorola/mpc107/mpc107.c | 66 |
2 files changed, 45 insertions, 23 deletions
diff --git a/src/northbridge/motorola/mpc107/meminfo.c b/src/northbridge/motorola/mpc107/meminfo.c index 935a5e0ac8..c7df85d617 100644 --- a/src/northbridge/motorola/mpc107/meminfo.c +++ b/src/northbridge/motorola/mpc107/meminfo.c @@ -49,7 +49,7 @@ sdram_dimm_to_bank_info(const char *data, sdram_dimm_info *dimm, int verbose) if (csum != data[63]) { if (verbose) - printk_info("Broken checksum\n"); + printk_info("Broken checksum 0x%x, should be 0x%x\n", data[63], csum); return; } diff --git a/src/northbridge/motorola/mpc107/mpc107.c b/src/northbridge/motorola/mpc107/mpc107.c index 0be883e211..3e4407d3d4 100644 --- a/src/northbridge/motorola/mpc107/mpc107.c +++ b/src/northbridge/motorola/mpc107/mpc107.c @@ -66,11 +66,19 @@ sizeram(void) return &meminfo; } +/* + * Configure the MPC107 with the most pessimistic settings. These + * are modified by reading the SPD EEPROM and adjusting accordingly. + * One thing to note. The SPD settings can be wrong, as + * was the case for my machine. I could only configure 32Mb out of + * 128Mb using these settings. +*/ void mpc107_init(void) { uint16_t reg16; uint32_t reg32; + uint32_t is32bits; /* * PCI Cmd @@ -93,6 +101,7 @@ mpc107_init(void) * 0x00000800 enable MCP* assertion * 0x00000400 enable TEA* assertion * 0x00000200 enable data bus parking + * 0x00000080 restrict flash write width * 0x00000040 enable PCI store gathering * 0x00000010 enable loop-snoop * 0x00000008 enable address bus parking @@ -105,7 +114,7 @@ mpc107_init(void) */ reg32 &= 0x11; - reg32 |= 0xff041a18; + reg32 |= 0xff041a98; pci_ppc_write_config32(0, 0, 0xa8, reg32); /* @@ -123,13 +132,14 @@ mpc107_init(void) * 0x00000008 addr phase wt states = 2 * 0x0000000c addr phase wt states = 3 */ - - pci_ppc_write_config32(0, 0, 0xac, 0x04040004); + reg32 = 0x04000000; + pci_ppc_write_config32(0, 0, 0xac, reg32); /* * EUMBBAR */ - pci_ppc_write_config32(0, 0, 0x78, 0xfc000000); + reg32 = 0xfc000000; + pci_ppc_write_config32(0, 0, 0x78, reg32); /* * MCCR1 - Set MEMGO bit later! @@ -140,10 +150,12 @@ mpc107_init(void) * 0x00020000 EDO/FP enable (else SDRAM) * 0x00010000 Parity check * 0x0000FFFF 16Mbit/2 bank SDRAM + * 0x0000AAAA 256Mbit/4 bank SDRAM * 0x00005555 64Mbit/2 bank SDRAM * 0x00000000 64Mbit/4 bank SDRAM */ reg32 = pci_ppc_read_config32(0, 0, 0xf0); + is32bits = (reg32 & 0x00400000) == 0; reg32 &= 0x00080000; /* Preserve MEMGO bit in case we're in RAM */ reg32 |= 0x75800000; pci_ppc_write_config32(0, 0, 0xf0, reg32); @@ -158,14 +170,16 @@ mpc107_init(void) * 0x00040000 SDRAM inline reads * 0x00020000 ECC enable * 0x00010000 EDO (else FP) - * 0x000006b8 Refresh 33MHz bus - * 0x0000035c Refresh 66MHz bus - * 0x0000023c Refresh 100MHz bus - * 0x000001ac Refresh 133MHz bus + * 0x000004cc Refresh 33MHz bus (307 clocks) + * 0x00000cc4 Refresh 66MHz bus (817 clocks) + * 0x000010fc Refresh 83MHz bus (1087 clocks) + * 0x0000150c Refresh 100MHz bus (1347 clocks) + * 0x00001d2c Refresh 133MHz bus (1867 clocks) * 0x00000002 Reserve a page * 0x00000001 RWM parity */ - pci_ppc_write_config32(0, 0, 0xf4, 0x0440023c); + reg32 = 0x044004cc; + pci_ppc_write_config32(0, 0, 0xf4, reg32); /* * MCCR3 @@ -174,7 +188,8 @@ mpc107_init(void) * 0x00400000 RDLAT = 4 clocks * 0x00300000 RDLAT = 3 clocks */ - pci_ppc_write_config32(0, 0, 0xf8, 0x78400000); + reg32 = 0x78400000; + pci_ppc_write_config32(0, 0, 0xf8, reg32); /* * MCCR4 @@ -190,13 +205,20 @@ mpc107_init(void) * 0x00003000 CAS Latencey (CL=3) * 0x00002000 CAS Latencey (CL=2) * 0x00000200 Sequential wrap/4-beat burst + * 0x00000300 Sequential wrap/8-beat burst * 0x00000030 Reserve a page * 0x00000009 RWM parity */ - pci_ppc_write_config32(0, 0, 0xfc, 0x35323239); + reg32 = 0x35323239; + if (!is32bits) + reg32 |= 0x0300; + pci_ppc_write_config32(0, 0, 0xfc, reg32); /* * MSAR1/MSAR2/MESAR1/MESAR2 + * + * Assume each memory block is 32Mb. This is + * most likely NOT correct. */ pci_ppc_write_config32(0, 0, 0x80, 0x60402000); pci_ppc_write_config32(0, 0, 0x84, 0xe0c0a080); @@ -228,7 +250,7 @@ mpc107_init(void) * 0x01 MemClk 20 ohms * 0x00 MemClk 40 ohms */ - pci_ppc_write_config8(0, 0, 0x73, 0xc0); + pci_ppc_write_config8(0, 0, 0x73, 0xd1); /* * CDCR @@ -244,15 +266,15 @@ mpc107_init(void) * 0x0002 CPU_CLK1 disabled * 0x0001 CPU_CLK2 disabled */ - pci_ppc_write_config16(0, 0, 0x74, 0xfc01); + pci_ppc_write_config16(0, 0, 0x74, 0xfd00); /* - * MDCR + * MICR * 0x80 MCP 1=open-drain, 0=output * 0x40 SRESET 1=open-drain, 0=output * 0x20 QACK 1=high-Z, 0=output */ - pci_ppc_write_config8(0, 0, 0x76, 0x60); + pci_ppc_write_config8(0, 0, 0x76, 0x40); /* * MBEN @@ -286,7 +308,7 @@ mpc107_init(void) } /* - * Configure memory settings. + * Configure real memory settings. */ unsigned long mpc107_config_memory(int no_banks, sdram_bank_info * bank, int for_real) @@ -678,12 +700,12 @@ mpc107_probe_dimms(int no_dimms, sdram_dimm_info *dimms, sdram_bank_info * bank) for(dimm = 0; dimm < no_dimms; dimm++) { dimms[dimm].number = dimm; - dimms[dimm].bank1 = bank + dimm*2; - dimms[dimm].bank2 = bank + dimm*2 + 1; - bank[dimm*2].size = 0; - bank[dimm*2+1].size = 0; - bank[dimm*2].number = 0; - bank[dimm*2+1].number = 1; + dimms[dimm].bank1 = bank + dimm*NUM_BANKS; + dimms[dimm].bank2 = bank + dimm*NUM_BANKS + 1; + bank[dimm*NUM_BANKS].size = 0; + bank[dimm*NUM_BANKS+1].size = 0; + bank[dimm*NUM_BANKS].number = 0; + bank[dimm*NUM_BANKS+1].number = 1; } |