summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorTim Wawrzynczak <twawrzynczak@chromium.org>2019-05-15 08:42:20 -0600
committerPatrick Georgi <pgeorgi@google.com>2019-05-20 16:28:38 +0000
commitddbf2c4af05b5cbd889d6a55e67734c8a041bc66 (patch)
treea2dab6ce14d19de9789773397044ae85a1d6158b /src
parent334e8360efb03644488ce4ac8a9a9e75ef6fa6c0 (diff)
downloadcoreboot-ddbf2c4af05b5cbd889d6a55e67734c8a041bc66.tar.xz
soc/intel/cannonlake: Configure SPI CS parameters in FSP UPD.
When FSP UPD parameters are configured, also configure the GSPI CS lines appropriately. GSPI driver assumes CS0 is the CS signal to use. BUG=b:130329260 BRANCH=None TEST=Boot Kohaku, TPM communcation still functional. Change-Id: Ic816395b7d198a52c704e6cabcb56889150b741c Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32791 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src')
-rw-r--r--src/soc/intel/cannonlake/fsp_params.c43
1 files changed, 43 insertions, 0 deletions
diff --git a/src/soc/intel/cannonlake/fsp_params.c b/src/soc/intel/cannonlake/fsp_params.c
index cc01d10fe8..dd9388296d 100644
--- a/src/soc/intel/cannonlake/fsp_params.c
+++ b/src/soc/intel/cannonlake/fsp_params.c
@@ -119,6 +119,28 @@ static void ignore_gbe_ltr(void)
write8(pmcbase + LTR_IGN, reg8);
}
+static void configure_gspi_cs(int idx, const config_t *config,
+ uint8_t *polarity, uint8_t *enable,
+ uint8_t *defaultcs)
+{
+ struct spi_cfg cfg;
+
+ /* If speed_mhz is set, infer that the port should be configured */
+ if (config->common_soc_config.gspi[idx].speed_mhz != 0) {
+ if (gspi_get_soc_spi_cfg(idx, &cfg) == 0) {
+ if (cfg.cs_polarity == SPI_POLARITY_LOW)
+ *polarity = 0;
+ else
+ *polarity = 1;
+
+ if (defaultcs != NULL)
+ *defaultcs = 0;
+ if (enable != NULL)
+ *enable = 1;
+ }
+ }
+}
+
/* UPD parameters to be initialized before SiliconInit */
void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd)
{
@@ -357,6 +379,27 @@ void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd)
/* Unlock all GPIO pads */
tconfig->PchUnlockGpioPads = config->PchUnlockGpioPads;
+
+ /*
+ * GSPI Chip Select parameters
+ * The GSPI driver assumes that CS0 is the used chip-select line,
+ * therefore only CS0 is configured below.
+ */
+#if CONFIG(SOC_INTEL_COMETLAKE)
+ configure_gspi_cs(0, config, &params->SerialIoSpi0CsPolarity[0],
+ &params->SerialIoSpi0CsEnable[0],
+ &params->SerialIoSpiDefaultCsOutput[0]);
+ configure_gspi_cs(1, config, &params->SerialIoSpi1CsPolarity[0],
+ &params->SerialIoSpi1CsEnable[0],
+ &params->SerialIoSpiDefaultCsOutput[1]);
+ configure_gspi_cs(2, config, &params->SerialIoSpi2CsPolarity[0],
+ &params->SerialIoSpi2CsEnable[0],
+ &params->SerialIoSpiDefaultCsOutput[2]);
+#else
+ for (i = 0; i < CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX; i++)
+ configure_gspi_cs(i, config,
+ &params->SerialIoSpiCsPolarity[0], NULL, NULL);
+#endif
}
/* Mainboard GPIO Configuration */