summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorLi-Ta Lo <ollie@lanl.gov>2004-03-23 21:28:05 +0000
committerLi-Ta Lo <ollie@lanl.gov>2004-03-23 21:28:05 +0000
commite52666931a3e34895b3f3b92641de9774ab722ec (patch)
tree890bb66a0a16ec7a57230283f000ee91eeb0b384 /src
parent9f46132e9627d24f3ad76619cf3340006a4012fb (diff)
downloadcoreboot-e52666931a3e34895b3f3b92641de9774ab722ec.tar.xz
Doxidization, reformat
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1469 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
-rw-r--r--src/arch/i386/lib/cpu_reset.inc3
-rw-r--r--src/boot/hardwaremain.c86
-rw-r--r--src/config/Options.lb5
-rw-r--r--src/cpu/k8/Config.lb3
-rw-r--r--src/cpu/k8/cpufixup.c2
-rw-r--r--src/cpu/k8/earlymtrr.c13
-rw-r--r--src/cpu/k8/earlymtrr.inc19
-rw-r--r--src/cpu/p6/mtrr.c16
-rw-r--r--src/devices/chip.c103
-rw-r--r--src/devices/device.c173
-rw-r--r--src/devices/device_util.c7
-rw-r--r--src/devices/pci_device.c296
-rw-r--r--src/devices/root_device.c38
-rw-r--r--src/include/device/device.h1
-rw-r--r--src/include/device/pci.h2
-rw-r--r--src/mainboard/tyan/s2885/Config.lb18
-rw-r--r--src/mainboard/via/epia/Config.lb3
-rw-r--r--src/mainboard/via/epia/auto.c4
-rw-r--r--src/northbridge/amd/amdk8/early_ht.c6
-rw-r--r--src/northbridge/amd/amdk8/northbridge.c54
-rw-r--r--src/northbridge/amd/amdk8/raminit.c2
-rw-r--r--src/southbridge/amd/amd8111/amd8111.c7
22 files changed, 572 insertions, 289 deletions
diff --git a/src/arch/i386/lib/cpu_reset.inc b/src/arch/i386/lib/cpu_reset.inc
index c7c05e2198..fcddd6b027 100644
--- a/src/arch/i386/lib/cpu_reset.inc
+++ b/src/arch/i386/lib/cpu_reset.inc
@@ -1,6 +1,9 @@
+/* -*- asm -*- */
+
jmp cpu_reset_out
__cpu_reset:
+ /* set the boot_complete flag */
movl $0xffffffff, %ebp
jmp __main
diff --git a/src/boot/hardwaremain.c b/src/boot/hardwaremain.c
index fed5302261..e3667cccd8 100644
--- a/src/boot/hardwaremain.c
+++ b/src/boot/hardwaremain.c
@@ -37,9 +37,6 @@ it with the version available from LANL.
#include <device/pci.h>
#include <device/chip.h>
#include <delay.h>
-#if 0
-#include <part/mainboard.h>
-#endif
#include <part/hard_reset.h>
#include <smp/atomic.h>
#include <boot/elf.h>
@@ -81,6 +78,12 @@ static struct mem_range *get_ramsize(void)
/* Number of cpus that are currently running in linuxbios */
static atomic_t active_cpus = ATOMIC_INIT(1);
+/**
+ * @brief Initialize secondary processors.
+ *
+ *
+ * @todo move this into a method of per cpu data structure.
+ */
void secondary_cpu_init(void)
{
struct mem_range *mem;
@@ -88,12 +91,14 @@ void secondary_cpu_init(void)
int index;
atomic_inc(&active_cpus);
+
printk_debug("%s\n", __FUNCTION__);
mem = get_ramsize();
id = cpu_initialize(mem);
index = processor_index(id);
printk_debug("%s %d/%u\n", __FUNCTION__ , index, id);
processor_map[index] = CPU_ENABLED;
+
atomic_dec(&active_cpus);
stop_cpu(id);
}
@@ -105,20 +110,22 @@ static void wait_for_other_cpus(void)
old_active_count = 1;
active_count = atomic_read(&active_cpus);
- while(active_count > 1) {
+ while (active_count > 1) {
if (active_count != old_active_count) {
- printk_info("Waiting for %d CPUS to stop\n", active_count);
+ printk_info("Waiting for %d CPUS to stop\n",
+ active_count);
old_active_count = active_count;
}
active_count = atomic_read(&active_cpus);
}
- for(i = 0; i < CONFIG_MAX_CPUS; i++) {
+
+ for (i = 0; i < CONFIG_MAX_CPUS; i++) {
if (!(processor_map[i] & CPU_ENABLED)) {
printk_err("CPU %d did not initialize!\n", i);
processor_map[i] = 0;
-#warning "FIXME do I need a mainboard_cpu_fixup function?"
}
}
+
printk_debug("All AP CPUs stopped\n");
}
@@ -126,20 +133,16 @@ static void wait_for_other_cpus(void)
#define wait_for_other_cpus() do {} while(0)
#endif /* CONFIG_SMP */
+/**
+ * @brief Main program of LinuxBIOS
+ *
+ * @param boot_complete
+ */
void hardwaremain(int boot_complete)
{
/* Processor ID of the BOOT cpu (i.e. the one running this code) */
unsigned long boot_cpu;
int boot_index;
-
- /* the order here is a bit tricky. We don't want to do much of
- * anything that uses config registers until after PciAllocateResources
- * since that function also figures out what kind of config strategy
- * to use (type 1 or type 2).
- * so we turn on cache, then worry about PCI setup, then do other
- * things, so that the other work can use the PciRead* and PciWrite*
- * functions.
- */
struct mem_range *mem, *tmem;
struct lb_memory *lb_mem;
unsigned long totalmem;
@@ -153,8 +156,8 @@ void hardwaremain(int boot_complete)
post_code(0x39);
printk_notice("LinuxBIOS-%s%s %s %s...\n",
- linuxbios_version, linuxbios_extra_version, linuxbios_build,
- (boot_complete)?"rebooting":"booting");
+ linuxbios_version, linuxbios_extra_version,
+ linuxbios_build, (boot_complete)?"rebooting":"booting");
post_code(0x40);
@@ -162,57 +165,68 @@ void hardwaremain(int boot_complete)
if (boot_complete) {
hard_reset();
}
+
CONFIGURE(CONF_PASS_PRE_PCI);
- /* pick how to scan the bus. This is first so we can get at memory size. */
+ /* determine how software can generate PCI configuration transactions
+ * in this system */
printk_info("Finding PCI configuration type.\n");
pci_set_method();
post_code(0x5f);
+
+ /* convert static device structures into dynamic device structures
+ * before probing dynamic devices. */
enumerate_static_devices();
+
+ /* probe the existence of dynamic devices and construct the dynamic
+ * device tree. */
dev_enumerate();
post_code(0x66);
- /* Now do the real bus.
- * We round the total ram up a lot for thing like the SISFB, which
- * shares high memory with the CPU.
- */
+
+ /* probe and assign the resources required by the dynamic devices */
dev_configure();
post_code(0x88);
+ /* enable the resources probed and assigned in dev_configure() */
dev_enable();
+ /* do the device specific init in additional to simple resources
+ * allocation performed in dev_enable() */
dev_initialize();
post_code(0x89);
CONFIGURE(CONF_PASS_POST_PCI);
+ /* this is done last because some devices may 'steal' memory from
+ * the system during device initialization. */
mem = get_ramsize();
post_code(0x70);
- totalmem = 0;
- for(tmem = mem; tmem->sizek; tmem++) {
+ for (totalmem = 0, tmem = mem; tmem->sizek; tmem++) {
totalmem += tmem->sizek;
}
- printk_info("totalram: %ldM\n",
- (totalmem + 512) >> 10); /* Round to the nearest meg */
+ /* Round to the nearest mega */
+ printk_info("totalram: %ldM\n", (totalmem + 512) >> 10);
- /* Fully initialize the cpu before configuring the bus */
+ /* fully initialize the boot processor */
boot_cpu = cpu_initialize(mem);
boot_index = processor_index(boot_cpu);
printk_spew("BOOT CPU is %d\n", boot_cpu);
processor_map[boot_index] = CPU_BOOTPROCESSOR|CPU_ENABLED;
- /* Now start the other cpus initializing
- * The sooner they start the sooner they stop.
- */
+ /* start up other processors, it works like a pthread_create() or
+ * fork(), instead of running the initialization code for all devices
+ * as the boot processor, they start from secondary_cpu_init(), doing
+ * cpu initialization only. */
post_code(0x75);
startup_other_cpus(processor_map);
- post_code(0x77);
- /* make certain we are the only cpu running in linuxBIOS */
+ /* like pthread_join() or wait(), wait other processors finishing
+ * their execution of secondary_cpu_init() and make certain we are
+ * the only cpu running in LinuxBIOS */
wait_for_other_cpus();
- /* Now that we have collected all of our information
- * write our configuration tables.
- */
+ /* Now that we have collected all of our information, write our
+ * configuration tables. */
lb_mem = write_tables(mem, processor_map);
CONFIGURE(CONF_PASS_PRE_BOOT);
diff --git a/src/config/Options.lb b/src/config/Options.lb
index 694a8aad4d..2009106d04 100644
--- a/src/config/Options.lb
+++ b/src/config/Options.lb
@@ -717,6 +717,11 @@ define HAVE_ACPI_TABLES
comment "Define to build ACPI tables"
end
+define AGP_APERTURE_SIZE
+ default none
+ export used
+ comment "AGP graphics virtual memory aperture size"
+end
###############################################
# Board specific options
diff --git a/src/cpu/k8/Config.lb b/src/cpu/k8/Config.lb
index a0a702e043..9081b07714 100644
--- a/src/cpu/k8/Config.lb
+++ b/src/cpu/k8/Config.lb
@@ -1,3 +1,6 @@
+# How does the config tool pick the correct
+# cpufixup.c to generate cupfixup.o ?
+
uses k8
uses CPU_FIXUP
default k8=1
diff --git a/src/cpu/k8/cpufixup.c b/src/cpu/k8/cpufixup.c
index 2d347de829..c25a473d2e 100644
--- a/src/cpu/k8/cpufixup.c
+++ b/src/cpu/k8/cpufixup.c
@@ -428,5 +428,5 @@ void k8_enable(struct chip *chip, enum chip_pass pass)
struct chip_control cpu_k8_control = {
.enable = k8_enable,
- .name = "AMD K8",
+ .name = "AMD K8 CPU",
};
diff --git a/src/cpu/k8/earlymtrr.c b/src/cpu/k8/earlymtrr.c
index 5fb63d2e7d..2138e3fefe 100644
--- a/src/cpu/k8/earlymtrr.c
+++ b/src/cpu/k8/earlymtrr.c
@@ -27,13 +27,24 @@ static void early_mtrr_init(void)
msr_t msr;
const unsigned long *msr_addr;
+ /* Enable the access to AMD RdDram and WrDram extension bits */
+ msr = rdmsr(SYSCFG_MSR);
+ msr.lo |= SYSCFG_MSR_MtrrFixDramModEn;
+ wrmsr(msr);
+
/* Inialize all of the relevant msrs to 0 */
msr.lo = 0;
msr.hi = 0;
- for(msr_addr = mtrr_msrs; *msr_addr; msr_addr++) {
+
+ for (msr_addr = mtrr_msrs; *msr_addr; msr_addr++) {
wrmsr(*msr_addr, msr);
}
+ /* Disable the access to AMD RdDram and WrDram extension bits */
+ msr = rdmsr(SYSCFG_MSR);
+ msr.lo &= ~SYSCFG_MSR_MtrrFixDramModEn;
+ wrmsr(msr);
+
/* Enable memory access for 0 - 1MB using top_mem */
msr.hi = 0;
msr.lo = ((CONFIG_LB_MEM_TOPK << 10) + TOP_MEM_MASK) & ~TOP_MEM_MASK;
diff --git a/src/cpu/k8/earlymtrr.inc b/src/cpu/k8/earlymtrr.inc
index acc917be7d..6f8537d255 100644
--- a/src/cpu/k8/earlymtrr.inc
+++ b/src/cpu/k8/earlymtrr.inc
@@ -13,6 +13,13 @@ earlymtrr_start:
xorl %edx, %edx #
movl $fixed_mtrr_msr, %esi
+enable_fixed_mtrr_dram_modify:
+ /* Enable the access to AMD RdDram and WrDram extension bits */
+ movl $SYSCFG_MSR, %ecx
+ rdmsr
+ orl $SYSCFG_MSR_MtrrFixDramModEn, %eax
+ wrmsr
+
clear_fixed_var_mtrr:
lodsl (%esi), %eax
testl %eax, %eax
@@ -25,7 +32,14 @@ clear_fixed_var_mtrr:
jmp clear_fixed_var_mtrr
clear_fixed_var_mtrr_out:
-/* enable memory access for 0 - 1MB using top_mem */
+disable_fixed_mtrr_dram_modify:
+ /* Disable the access to AMD RdDram and WrDram extension bits */
+ movl $SYSCFG_MSR, %ecx
+ rdmsr
+ andl $(~SYSCFG_MSR_MtrrFixDramModEn), %eax
+ wrmsr
+
+ /* enable memory access for 0 - 1MB using top_mem */
movl $TOP_MEM, %ecx
xorl %edx, %edx
movl $(((CONFIG_LB_MEM_TOPK << 10) + TOP_MEM_MASK) & ~TOP_MEM_MASK) , %eax
@@ -72,9 +86,10 @@ enable_mtrr:
movl $0x00000800, %eax
wrmsr
- /* Enable the MTRRs in SYSCFG */
+ /* Enable the MTRRs and IORRs in SYSCFG */
movl $SYSCFG_MSR, %ecx
rdmsr
+ /* Don't enable SYSCFG_MSR_MtrrFixDramEn) untill we have done with VGA BIOS */
orl $(SYSCFG_MSR_MtrrVarDramEn), %eax
wrmsr
diff --git a/src/cpu/p6/mtrr.c b/src/cpu/p6/mtrr.c
index 7e2eb06e95..89465c6209 100644
--- a/src/cpu/p6/mtrr.c
+++ b/src/cpu/p6/mtrr.c
@@ -99,7 +99,7 @@ static void intel_set_var_mtrr(unsigned int reg, unsigned long basek, unsigned l
base.hi = basek >> 22;
base.lo = basek << 10;
- //printk_debug("ADDRESS_MASK_HIGH=%#x\n", ADDRESS_MASK_HIGH);
+ //printk_debug("ADDRESS_MASK_HIGH=%#x\n", ADDRESS_MASK_HIGH);
if (sizek < 4*1024*1024) {
mask.hi = ADDRESS_MASK_HIGH;
@@ -219,7 +219,7 @@ static void set_fixed_mtrrs(unsigned int first, unsigned int last, unsigned char
unsigned int fixed_msr = NUM_FIXED_RANGES >> 3;
msr_t msr;
msr.lo = msr.hi = 0; /* Shut up gcc */
- for(i = first; i < last; i++) {
+ for (i = first; i < last; i++) {
/* When I switch to a new msr read it in */
if (fixed_msr != i >> 3) {
/* But first write out the old msr */
@@ -304,12 +304,12 @@ void setup_mtrrs(struct mem_range *mem)
printk_debug("\n");
/* Initialized the fixed_mtrrs to uncached */
printk_debug("Setting fixed MTRRs(%d-%d) type: UC\n",
- 0, NUM_FIXED_RANGES);
+ 0, NUM_FIXED_RANGES);
set_fixed_mtrrs(0, NUM_FIXED_RANGES, MTRR_TYPE_UNCACHEABLE);
/* Now see which of the fixed mtrrs cover ram.
*/
- for(memp = mem; memp->sizek; memp++) {
+ for (memp = mem; memp->sizek; memp++) {
unsigned int start_mtrr;
unsigned int last_mtrr;
start_mtrr = fixed_mtrr_index(memp->basek);
@@ -317,11 +317,17 @@ void setup_mtrrs(struct mem_range *mem)
if (start_mtrr >= NUM_FIXED_RANGES) {
break;
}
+
+#if defined(k7) || defined(k8)
+#warning "FIXME: dealing with RdMEM/WrMEM for Athlon/Opteron"
+#endif
+
printk_debug("Setting fixed MTRRs(%d-%d) type: WB\n",
- start_mtrr, last_mtrr);
+ start_mtrr, last_mtrr);
set_fixed_mtrrs(start_mtrr, last_mtrr, MTRR_TYPE_WRBACK);
}
printk_debug("DONE fixed MTRRs\n");
+
/* Cache as many memory areas as possible */
/* FIXME is there an algorithm for computing the optimal set of mtrrs?
* In some cases it is definitely possible to do better.
diff --git a/src/devices/chip.c b/src/devices/chip.c
index d8a59e3062..33f3976eb8 100644
--- a/src/devices/chip.c
+++ b/src/devices/chip.c
@@ -9,8 +9,22 @@
#include <device/chip.h>
#include <device/pci.h>
-void
-chip_configure(struct chip *root, enum chip_pass pass)
+/**
+ * @brief Configure static devices
+ *
+ * Starting from the static device 'root', walk the tree and configure each
+ * device by calling the device specific chip_control::enable().
+ *
+ * This function is only an iterator, the exact definition of 'configure'
+ * depends on the device specific implementation of chip_control::enable().
+ *
+ * @param root root of the static device tree to be configured.
+ * @param pass pass of the configuration operation to be perfromed.
+ *
+ * @see chip_pass
+ * @see chip_control::enable
+ */
+void chip_configure(struct chip *root, enum chip_pass pass)
{
struct chip *c;
@@ -25,24 +39,37 @@ chip_configure(struct chip *root, enum chip_pass pass)
}
}
-/** Convert a static struct chip structure to a set of dynamic device structures.
- * @param chip Static chip structure to start with.
+/**
+ * @brief Convert static device structures to dynamic structures.
+ *
+ * A static device may contain one or more dynamic devices. Dynamic device
+ * structures of these devices have to be generated before the enumeration
+ * of dynamic devices. This function converts a static chip structure to a
+ * set of dynamic device structures.
+ *
+ * This function is the generic method called by enumerate_static_device_chain()
+ * for static devices. Devices extend this default behavior by defining their
+ * own chip_controll::enumerate(). Generally, device specific
+ * chip_control::enumerate() method calls this function as its last operation.
+ *
+ * @param chip static chip structure to be converted.
+ *
*/
-
void chip_enumerate(struct chip *chip)
{
struct chip *child;
device_t dev;
int link;
int i;
+
dev = 0;
link = 0;
-#if 1
+
if (chip->control && chip->control->name) {
printk_debug("Enumerating: %s\n", chip->control->name);
}
-#endif
- for(i = 0; i < MAX_CHIP_PATHS; i++) {
+
+ for (i = 0; i < MAX_CHIP_PATHS; i++) {
int identical_paths;
identical_paths =
(i > 0) &&
@@ -55,6 +82,7 @@ void chip_enumerate(struct chip *chip)
parent = chip->bus;
switch(chip->path[i].path.type) {
case DEVICE_PATH_NONE:
+ /* no dynamic device associated */
break;
case DEVICE_PATH_PCI:
bus = chip->path[i].path.u.pci.bus;
@@ -62,7 +90,7 @@ void chip_enumerate(struct chip *chip)
device_t dev;
int i = 1;
dev = chip->dev;
- while(dev && (i != bus)) {
+ while (dev && (i != bus)) {
dev = dev->next;
i++;
}
@@ -75,18 +103,21 @@ void chip_enumerate(struct chip *chip)
dev = alloc_dev(parent, &chip->path[i].path);
break;
}
- }
- else {
+ } else {
link += 1;
}
+
if (dev) {
struct chip_resource *res, *res_limit;
- printk_spew("path (%p) %s %s", dev, dev_path(dev), identical_paths?"identical":"");
- printk_spew(" parent: (%p) %s\n",dev->bus->dev, dev_path(dev->bus->dev));
+ printk_spew("path (%p) %s %s",
+ dev, dev_path(dev),
+ identical_paths?"identical":"");
+ printk_spew(" parent: (%p) %s\n",
+ dev->bus->dev, dev_path(dev->bus->dev));
dev->chip = chip;
dev->enable = chip->path[i].enable;
dev->links = link + 1;
- for(child = chip->children; child; child = child->next) {
+ for (child = chip->children; child; child = child->next) {
if (!child->bus && child->link == i) {
child->bus = &dev->link[link];
}
@@ -102,21 +133,42 @@ void chip_enumerate(struct chip *chip)
}
}
}
+
if (dev && !chip->dev) {
chip->dev = dev;
}
}
- for(child = chip->children; child; child = child->next) {
+
+ for (child = chip->children; child; child = child->next) {
if (!child->bus) {
child->bus = &chip->dev->link[0];
}
}
}
+/**
+ * @brief Enumerate a static device tree.
+ *
+ * A static device chain is a linked list of static device structures which are
+ * on the same branch of the static device tree. This function does not only
+ * enumerate the devices on a single chain, as its name suggest, it also walks
+ * into the subordinary chains. It calls the device specific
+ * chip_control::enumerate() of the device if one exists or calls the generic
+ * chip_enumerate().
+ *
+ * This function is only an iterator, the exact definition of 'enumerate'
+ * depends on the implementation of the generic chip_enumerate() and/or device
+ * specific chip_control::enumerate().
+ *
+ * @param root static chip structure to start with.
+ *
+ * @see chip_control::enumerate()
+ */
static void enumerate_static_device_chain(struct chip *root)
{
struct chip *chip;
- for(chip = root; chip; chip = chip->next) {
+
+ for (chip = root; chip; chip = chip->next) {
void (*enumerate)(struct chip *chip);
enumerate = chip_enumerate;
if (chip->control && chip->control->enumerate) {
@@ -125,13 +177,30 @@ static void enumerate_static_device_chain(struct chip *root)
enumerate(chip);
}
- for(chip = root; chip; chip = chip->next) {
+ for (chip = root; chip; chip = chip->next) {
if (chip->children) {
enumerate_static_device_chain(chip->children);
}
}
}
+/**
+ * @brief Enumerate static devices in the system.
+ *
+ * \note The definition of 'enumerate' is not clear in this context. Does it mean
+ * probe ?
+ *
+ * \note How do we determine the existence of the static devices ? Static
+ * devices are listed in the config file and generated at compile time by config
+ * tool. This function is called at certain point in the early stage of
+ * LinuxBIOS. It uses the chip_enumerate() function to convert the static
+ * structures into dynamic ones. What if the static devices listed in the config
+ * file does actually not exist in the system ? Is there any side effect of
+ * these 'phantom' device structures
+ *
+ * The static device does not necesarry conform to the dynamic device tree in
+ * the system.
+ */
void enumerate_static_devices(void)
{
enumerate_static_device_chain(&static_root);
diff --git a/src/devices/device.c b/src/devices/device.c
index b54e770294..0186aa977a 100644
--- a/src/devices/device.c
+++ b/src/devices/device.c
@@ -22,24 +22,41 @@
#include <stdlib.h>
#include <string.h>
-/* Linked list of ALL devices */
+/** Linked list of ALL devices */
struct device *all_devices = &dev_root;
-/* pointer to the last device */
+/** Pointer to the last device */
static struct device **last_dev_p = &dev_root.next;
-#define DEVICE_MEM_HIGH 0xFEC00000UL /* Reserve 20M for the system */
+/** The upper limit of MEM resource of the devices.
+ * Reserve 20M for the system */
+#define DEVICE_MEM_HIGH 0xFEC00000UL
+/** The lower limit of IO resource of the devices.
+ * Reserve 4k for ISA/Legacy devices */
#define DEVICE_IO_START 0x1000
-/** Allocate a new device structure
+/**
+ * @brief Allocate a new device structure.
+ *
+ * Allocte a new device structure and attached it to the device tree as a child
+ * of the parent bus.
+ *
+ * @param parent parent bus the newly created device attached to.
+ * @param path path to the device to be created.
+ *
+ * @return pointer to the newly created device structure.
+ *
+ * @see device_path
*/
device_t alloc_dev(struct bus *parent, struct device_path *path)
{
device_t dev, child;
int link;
+
/* Find the last child of our parent */
- for(child = parent->children; child && child->sibling; ) {
+ for (child = parent->children; child && child->sibling; ) {
child = child->sibling;
}
+
dev = malloc(sizeof(*dev));
if (dev == 0) {
die("DEV: out of memory.\n");
@@ -47,14 +64,14 @@ device_t alloc_dev(struct bus *parent, struct device_path *path)
memset(dev, 0, sizeof(*dev));
memcpy(&dev->path, path, sizeof(*path));
- /* Append a new device to the global device chain.
- * The chain is used to find devices once everything is set up.
+ /* Append a new device to the global device list.
+ * The list is used to find devices once everything is set up.
*/
*last_dev_p = dev;
last_dev_p = &dev->next;
/* Initialize the back pointers in the link fields */
- for(link = 0; link < MAX_LINKS; link++) {
+ for (link = 0; link < MAX_LINKS; link++) {
dev->link[link].dev = dev;
dev->link[link].link = link;
}
@@ -66,12 +83,15 @@ device_t alloc_dev(struct bus *parent, struct device_path *path)
} else {
parent->children = dev;
}
+
/* If we don't have any other information about a device enable it */
dev->enable = 1;
+
return dev;
}
-/** round a number to an alignment.
+/**
+ * @brief round a number up to an alignment.
* @param val the starting value
* @param roundup Alignment as a power of two
* @returns rounded up number
@@ -104,7 +124,7 @@ static void read_resources(struct bus *bus)
struct device *curdev;
/* Walk through all of the devices and find which resources they need. */
- for(curdev = bus->children; curdev; curdev = curdev->sibling) {
+ for (curdev = bus->children; curdev; curdev = curdev->sibling) {
unsigned links;
int i;
if (curdev->resources > 0) {
@@ -112,20 +132,22 @@ static void read_resources(struct bus *bus)
}
if (!curdev->ops || !curdev->ops->read_resources) {
printk_err("%s missing read_resources\n",
- dev_path(curdev));
+ dev_path(curdev));
continue;
}
if (!curdev->enable) {
continue;
}
+
curdev->ops->read_resources(curdev);
+
/* Read in subtractive resources behind the current device */
links = 0;
- for(i = 0; i < curdev->resources; i++) {
+ for (i = 0; i < curdev->resources; i++) {
struct resource *resource;
resource = &curdev->resource[i];
if ((resource->flags & IORESOURCE_SUBTRACTIVE) &&
- (!(links & (1 << resource->index))))
+ (!(links & (1 << resource->index))))
{
links |= (1 << resource->index);
read_resources(&curdev->link[resource->index]);
@@ -142,8 +164,8 @@ struct pick_largest_state {
int seen_last;
};
-static void pick_largest_resource(
- struct pick_largest_state *state, struct device *dev, struct resource *resource)
+static void pick_largest_resource(struct pick_largest_state *state,
+ struct device *dev, struct resource *resource)
{
struct resource *last;
last = state->last;
@@ -152,32 +174,33 @@ static void pick_largest_resource(
state->seen_last = 1;
return;
}
- if (last && (
- (last->align < resource->align) ||
- ((last->align == resource->align) &&
- (last->size < resource->size)) ||
- ((last->align == resource->align) &&
- (last->size == resource->size) &&
- (!state->seen_last)))) {
+ if (last &&
+ ((last->align < resource->align) ||
+ ((last->align == resource->align) &&
+ (last->size < resource->size)) ||
+ ((last->align == resource->align) &&
+ (last->size == resource->size) &&
+ (!state->seen_last)))) {
return;
}
- if (!state->result ||
- (state->result->align < resource->align) ||
- ((state->result->align == resource->align) &&
- (state->result->size < resource->size))) {
+ if (!state->result ||
+ (state->result->align < resource->align) ||
+ ((state->result->align == resource->align) &&
+ (state->result->size < resource->size))) {
state->result_dev = dev;
state->result = resource;
- }
-
+ }
}
static void find_largest_resource(struct pick_largest_state *state,
- struct bus *bus, unsigned long type_mask, unsigned long type)
+ struct bus *bus, unsigned long type_mask,
+ unsigned long type)
{
struct device *curdev;
- for(curdev = bus->children; curdev; curdev = curdev->sibling) {
+
+ for (curdev = bus->children; curdev; curdev = curdev->sibling) {
int i;
- for(i = 0; i < curdev->resources; i++) {
+ for (i = 0; i < curdev->resources; i++) {
struct resource *resource = &curdev->resource[i];
/* If it isn't the right kind of resource ignore it */
if ((resource->flags & type_mask) != type) {
@@ -187,7 +210,8 @@ static void find_largest_resource(struct pick_largest_state *state,
if (resource->flags & IORESOURCE_SUBTRACTIVE) {
struct bus *subbus;
subbus = &curdev->link[resource->index];
- find_largest_resource(state, subbus, type_mask, type);
+ find_largest_resource(state, subbus,
+ type_mask, type);
continue;
}
/* See if this is the largest resource */
@@ -196,8 +220,10 @@ static void find_largest_resource(struct pick_largest_state *state,
}
}
-static struct device *largest_resource(struct bus *bus, struct resource **result_res,
- unsigned long type_mask, unsigned long type)
+static struct device *largest_resource(struct bus *bus,
+ struct resource **result_res,
+ unsigned long type_mask,
+ unsigned long type)
{
struct pick_largest_state state;
@@ -254,12 +280,12 @@ void compute_allocate_resource(
min_align = 0;
base = bridge->base;
- printk_spew("%s compute_allocate_%s: base: %08lx size: %08lx align: %d gran: %d\n",
- dev_path(bus->dev),
- (bridge->flags & IORESOURCE_IO)? "io":
- (bridge->flags & IORESOURCE_PREFETCH)? "prefmem" : "mem",
- base, bridge->size, bridge->align, bridge->gran);
-
+ printk_spew("%s compute_allocate_%s: base: %08lx size: %08lx "
+ "align: %d gran: %d\n",
+ dev_path(bus->dev),
+ (bridge->flags & IORESOURCE_IO)? "io":
+ (bridge->flags & IORESOURCE_PREFETCH)? "prefmem" : "mem",
+ base, bridge->size, bridge->align, bridge->gran);
/* We want different minimum alignments for different kinds of
* resources. These minimums are not device type specific
@@ -278,8 +304,9 @@ void compute_allocate_resource(
/* Remember I haven't found anything yet. */
resource = 0;
- /* Walk through all the devices on the current bus and compute the addresses */
- while((dev = largest_resource(bus, &resource, type_mask, type))) {
+ /* Walk through all the devices on the current bus and compute the
+ * addresses */
+ while ((dev = largest_resource(bus, &resource, type_mask, type))) {
unsigned long size;
/* Do NOT I repeat do not ignore resources which have zero size.
* If they need to be ignored dev->read_resources should not even
@@ -357,6 +384,8 @@ void compute_allocate_resource(
static void allocate_vga_resource(void)
{
#warning "FIXME modify allocate_vga_resource so it is less pci centric!"
+#warning "This function knows to much about PCI stuff, it should be just a ietrator/visitor."
+
/* FIXME handle the VGA pallette snooping */
struct device *dev, *vga;
struct bus *bus;
@@ -422,7 +451,7 @@ void enable_resources(struct device *dev)
*/
if (!dev->ops || !dev->ops->enable_resources) {
printk_err("%s missing enable_resources\n",
- dev_path(dev));
+ dev_path(dev));
return;
}
if (!dev->enable) {
@@ -431,58 +460,74 @@ void enable_resources(struct device *dev)
dev->ops->enable_resources(dev);
}
-/** Enumerate the resources on the PCI by calling pci_init
+/**
+ * @brief Determine the existence of dynamic devices and construct dynamic
+ * device tree.
+ *
+ * Start for the root device 'dev_root', scan the buses in the system, build
+ * the dynamic device tree according to the result of the probe.
+ *
+ * This function have no idea how to scan and probe the buses and devices at
+ * all. It depends on the bus/device specific scan_bus() method to do it.
+ * The scan_bus() function also have to create the device structure and attach
+ * it to the device tree.
*/
void dev_enumerate(void)
{
struct device *root;
unsigned subordinate;
- printk_info("Enumerating buses...");
+
+ printk_info("Enumerating buses...\n");
+
root = &dev_root;
subordinate = root->ops->scan_bus(root, 0);
+
printk_info("done\n");
}
-/** Starting at the root, compute what resources are needed and allocate them.
+/**
+ * @brief Configure devices on the devices tree.
+ *
+ * Starting at the root, compute what resources are needed and allocate them.
* I/O starts at PCI_IO_START. Since the assignment is hierarchical we
* set the values into the dev_root struct.
*/
void dev_configure(void)
{
struct device *root = &dev_root;
+
printk_info("Allocating resources...");
printk_debug("\n");
-
root->ops->read_resources(root);
- /* Make certain the io devices are allocated somewhere
- * safe.
- */
+ /* Make certain the io devices are allocated somewhere safe. */
root->resource[0].base = DEVICE_IO_START;
root->resource[0].flags |= IORESOURCE_ASSIGNED;
root->resource[0].flags &= ~IORESOURCE_STORED;
- /* Now reallocate the pci resources memory with the
- * highest addresses I can manage.
- */
+
+ /* Now reallocate the pci resources memory with the highest
+ * addresses I can manage.*/
root->resource[1].base =
round_down(DEVICE_MEM_HIGH - root->resource[1].size,
- 1UL << root->resource[1].align);
+ 1UL << root->resource[1].align);
root->resource[1].flags |= IORESOURCE_ASSIGNED;
root->resource[1].flags &= ~IORESOURCE_STORED;
- /* Allocate the VGA I/O resource..
- */
+ /* Allocate the VGA I/O resource.. */
allocate_vga_resource();
- // now just set things into registers ... we hope ...
+ /* now just set things into registers ... we hope ... */
root->ops->set_resources(root);
printk_info("done.\n");
}
-/** Starting at the root, walk the tree and enable all devices/bridges.
- * What really happens is computed COMMAND bits get set in register 4
+/**
+ * @brief Enable devices on the device tree.
+ *
+ * Starting at the root, walk the tree and enable all devices/bridges by
+ * calling the device's enable_resources() method.
*/
void dev_enable(void)
{
@@ -490,22 +535,28 @@ void dev_enable(void)
/* now enable everything. */
enable_resources(&dev_root);
+
printk_info("done.\n");
}
-/** Starting at the root, walk the tree and call a driver to
- * do device specific setup.
+/**
+ * @brief Initialize all devices in the global device list.
+ *
+ * Starting at the first device on the global device link list,
+ * walk the list and call a driver to do device specific setup.
*/
void dev_initialize(void)
{
struct device *dev;
printk_info("Initializing devices...\n");
+
for (dev = all_devices; dev; dev = dev->next) {
if (dev->enable && dev->ops && dev->ops->init) {
printk_debug("%s init\n", dev_path(dev));
dev->ops->init(dev);
}
}
+
printk_info("Devices initialized\n");
}
diff --git a/src/devices/device_util.c b/src/devices/device_util.c
index 013501474c..29bb539e1d 100644
--- a/src/devices/device_util.c
+++ b/src/devices/device_util.c
@@ -6,15 +6,16 @@
/**
- * See if a device structure already exists and if not allocate it
+ * @brief See if a device structure already exists and if not allocate it
+ *
* @param bus The bus to find the device on
* @param path The relative path from the bus to the appropriate device
- * @return pointer a device structure for the device on bus at path
+ * @return pointer to a device structure for the device on bus at path
*/
device_t alloc_find_dev(struct bus *parent, struct device_path *path)
{
device_t child;
- for(child = parent->children; child; child = child->sibling) {
+ for (child = parent->children; child; child = child->sibling) {
if (path_eq(path, &child->path)) {
return child;
}
diff --git a/src/devices/pci_device.c b/src/devices/pci_device.c
index c3f1f6ac8c..4bc4e1f9f0 100644
--- a/src/devices/pci_device.c
+++ b/src/devices/pci_device.c
@@ -151,7 +151,7 @@ static void pci_read_bases(struct device *dev, unsigned int howmany)
{
unsigned long index;
- for(index = PCI_BASE_ADDRESS_0; (index < PCI_BASE_ADDRESS_0 + (howmany << 2)); ) {
+ for (index = PCI_BASE_ADDRESS_0; (index < PCI_BASE_ADDRESS_0 + (howmany << 2)); ) {
struct resource *resource;
resource = pci_get_resource(dev, index);
index += (resource->flags & IORESOURCE_PCI64)?8:4;
@@ -159,7 +159,6 @@ static void pci_read_bases(struct device *dev, unsigned int howmany)
compact_resources(dev);
}
-
static void pci_bridge_read_bases(struct device *dev)
{
struct resource *resource;
@@ -174,7 +173,7 @@ static void pci_bridge_read_bases(struct device *dev)
resource->limit = 0xffffUL;
resource->flags |= IORESOURCE_IO | IORESOURCE_PCI_BRIDGE;
compute_allocate_resource(&dev->link[0], resource,
- IORESOURCE_IO, IORESOURCE_IO);
+ IORESOURCE_IO, IORESOURCE_IO);
/* Initiliaze the prefetchable memory constraints on the current bus */
resource = get_resource(dev, PCI_PREF_MEMORY_BASE);
@@ -185,8 +184,8 @@ static void pci_bridge_read_bases(struct device *dev)
resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH | IORESOURCE_PCI_BRIDGE;
resource->index = PCI_PREF_MEMORY_BASE;
compute_allocate_resource(&dev->link[0], resource,
- IORESOURCE_MEM | IORESOURCE_PREFETCH,
- IORESOURCE_MEM | IORESOURCE_PREFETCH);
+ IORESOURCE_MEM | IORESOURCE_PREFETCH,
+ IORESOURCE_MEM | IORESOURCE_PREFETCH);
/* Initialize the memory resources on the current bus */
resource = get_resource(dev, PCI_MEMORY_BASE);
@@ -196,17 +195,18 @@ static void pci_bridge_read_bases(struct device *dev)
resource->limit = 0xffffffffUL;
resource->flags = IORESOURCE_MEM | IORESOURCE_PCI_BRIDGE;
compute_allocate_resource(&dev->link[0], resource,
- IORESOURCE_MEM | IORESOURCE_PREFETCH,
- IORESOURCE_MEM);
+ IORESOURCE_MEM | IORESOURCE_PREFETCH,
+ IORESOURCE_MEM);
compact_resources(dev);
}
-
void pci_dev_read_resources(struct device *dev)
{
uint32_t addr;
+
pci_read_bases(dev, 6);
+
addr = pci_read_config32(dev, PCI_ROM_ADDRESS);
dev->rom_address = (addr == 0xffffffff)? 0 : addr;
}
@@ -214,14 +214,29 @@ void pci_dev_read_resources(struct device *dev)
void pci_bus_read_resources(struct device *dev)
{
uint32_t addr;
+
pci_bridge_read_bases(dev);
pci_read_bases(dev, 2);
addr = pci_read_config32(dev, PCI_ROM_ADDRESS1);
dev->rom_address = (addr == 0xffffffff)? 0 : addr;
-
}
+/**
+ * @brief round a number up to an alignment.
+ * @param val the starting value
+ * @param roundup Alignment as a power of two
+ * @returns rounded up number
+ */
+static unsigned long round(unsigned long val, unsigned long roundup)
+{
+ /* ROUNDUP MUST BE A POWER OF TWO. */
+ unsigned long inverse;
+ inverse = ~(roundup - 1);
+ val += (roundup - 1);
+ val &= inverse;
+ return val;
+}
static void pci_set_resource(struct device *dev, struct resource *resource)
{
@@ -230,11 +245,10 @@ static void pci_set_resource(struct device *dev, struct resource *resource)
unsigned long gran;
/* Make certain the resource has actually been set */
+
if (!(resource->flags & IORESOURCE_ASSIGNED)) {
-#if 1
printk_err("ERROR: %s %02x not allocated\n",
- dev_path(dev), resource->index);
-#endif
+ dev_path(dev), resource->index);
return;
}
@@ -256,8 +270,10 @@ static void pci_set_resource(struct device *dev, struct resource *resource)
if (resource->flags & IORESOURCE_PCI_BRIDGE) {
dev->command |= PCI_COMMAND_MASTER;
}
+
/* Get the base address */
base = resource->base;
+
/* Get the resource granularity */
gran = 1UL << resource->gran;
@@ -268,15 +284,13 @@ static void pci_set_resource(struct device *dev, struct resource *resource)
*/
/* Get the limit (rounded up) */
- limit = base + ((resource->size + gran - 1UL) & ~(gran - 1UL)) -1UL;
+ limit = base + round(resource->size, gran) - 1UL;
/* Now store the resource */
resource->flags |= IORESOURCE_STORED;
if (!(resource->flags & IORESOURCE_PCI_BRIDGE)) {
- /*
- * some chipsets allow us to set/clear the IO bit.
- * (e.g. VIA 82c686a.) So set it to be safe)
- */
+ /* some chipsets allow us to set/clear the IO bit.
+ * (e.g. VIA 82c686a.) So set it to be safe) */
limit = base + resource->size -1;
if (resource->flags & IORESOURCE_IO) {
base |= PCI_BASE_ADDRESS_SPACE_IO;
@@ -286,58 +300,50 @@ static void pci_set_resource(struct device *dev, struct resource *resource)
/* FIXME handle real 64bit base addresses */
pci_write_config32(dev, resource->index + 4, 0);
}
- }
- else if (resource->index == PCI_IO_BASE) {
+ } else if (resource->index == PCI_IO_BASE) {
/* set the IO ranges
* WARNING: we don't really do 32-bit addressing for IO yet!
*/
compute_allocate_resource(&dev->link[0], resource,
- IORESOURCE_IO, IORESOURCE_IO);
+ IORESOURCE_IO, IORESOURCE_IO);
pci_write_config8(dev, PCI_IO_BASE, base >> 8);
pci_write_config8(dev, PCI_IO_LIMIT, limit >> 8);
pci_write_config16(dev, PCI_IO_BASE_UPPER16, 0);
pci_write_config16(dev, PCI_IO_LIMIT_UPPER16, 0);
- }
- else if (resource->index == PCI_MEMORY_BASE) {
- /* set the memory range
- */
+ } else if (resource->index == PCI_MEMORY_BASE) {
+ /* set the memory range */
compute_allocate_resource(&dev->link[0], resource,
- IORESOURCE_MEM | IORESOURCE_PREFETCH,
- IORESOURCE_MEM);
+ IORESOURCE_MEM | IORESOURCE_PREFETCH,
+ IORESOURCE_MEM);
pci_write_config16(dev, PCI_MEMORY_BASE, base >> 16);
pci_write_config16(dev, PCI_MEMORY_LIMIT, limit >> 16);
- }
- else if (resource->index == PCI_PREF_MEMORY_BASE) {
+ } else if (resource->index == PCI_PREF_MEMORY_BASE) {
/* set the prefetchable memory range
- * WARNING: we don't really do 64-bit addressing for prefetchable memory yet!
- */
+ * WARNING: we don't really do 64-bit addressing for
+ * prefetchable memory yet! */
compute_allocate_resource(&dev->link[0], resource,
- IORESOURCE_MEM | IORESOURCE_PREFETCH,
- IORESOURCE_MEM | IORESOURCE_PREFETCH);
+ IORESOURCE_MEM | IORESOURCE_PREFETCH,
+ IORESOURCE_MEM | IORESOURCE_PREFETCH);
pci_write_config16(dev, PCI_PREF_MEMORY_BASE, base >> 16);
pci_write_config16(dev, PCI_PREF_MEMORY_LIMIT, limit >> 16);
pci_write_config32(dev, PCI_PREF_BASE_UPPER32, 0);
pci_write_config32(dev, PCI_PREF_LIMIT_UPPER32, 0);
- }
- else {
+ } else {
/* Don't let me think I stored the resource */
resource->flags &= ~IORESOURCE_STORED;
printk_err("ERROR: invalid resource->index %x\n",
- resource->index);
+ resource->index);
}
+
buf[0] = '\0';
if (resource->flags & IORESOURCE_PCI_BRIDGE) {
sprintf(buf, "bus %d ", dev->link[0].secondary);
}
-
- printk_debug(
- "%s %02x <- [0x%08lx - 0x%08lx] %s%s\n",
- dev_path(dev),
- resource->index,
- resource->base, limit,
- buf,
- (resource->flags & IORESOURCE_IO)? "io":
- (resource->flags & IORESOURCE_PREFETCH)? "prefmem": "mem");
+ printk_debug("%s %02x <- [0x%08lx - 0x%08lx] %s%s\n",
+ dev_path(dev), resource->index, resource->base,
+ limit, buf,
+ (resource->flags & IORESOURCE_IO)? "io":
+ (resource->flags & IORESOURCE_PREFETCH)? "prefmem": "mem");
return;
}
@@ -348,11 +354,11 @@ void pci_dev_set_resources(struct device *dev)
uint8_t line;
last = &dev->resource[dev->resources];
-
- for(resource = &dev->resource[0]; resource < last; resource++) {
+ for (resource = &dev->resource[0]; resource < last; resource++) {
pci_set_resource(dev, resource);
}
- for(link = 0; link < dev->links; link++) {
+
+ for (link = 0; link < dev->links; link++) {
struct bus *bus;
bus = &dev->link[link];
if (bus->children) {
@@ -401,43 +407,55 @@ void pci_bus_enable_resources(struct device *dev)
pci_dev_enable_resources(dev);
}
+/** Default device operation for PCI devices */
struct device_operations default_pci_ops_dev = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
- .init = 0,
- .scan_bus = 0,
+ .init = 0,
+ .scan_bus = 0,
};
+
+/** Default device operations for PCI bridges */
struct device_operations default_pci_ops_bus = {
.read_resources = pci_bus_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_bus_enable_resources,
- .init = 0,
- .scan_bus = pci_scan_bridge,
+ .init = 0,
+ .scan_bus = pci_scan_bridge,
};
+
+/**
+ * @brief Set up PCI device operation
+ *
+ *
+ * @param dev
+ *
+ * @see pci_drivers
+ */
static void set_pci_ops(struct device *dev)
{
struct pci_driver *driver;
+
if (dev->ops) {
return;
}
+
/* Look through the list of setup drivers and find one for
- * this pci device
- */
- for(driver = &pci_drivers[0]; driver != &epci_drivers[0]; driver++) {
+ * this pci device */
+ for (driver = &pci_drivers[0]; driver != &epci_drivers[0]; driver++) {
if ((driver->vendor == dev->vendor) &&
- (driver->device == dev->device)) {
+ (driver->device == dev->device)) {
dev->ops = driver->ops;
-#if 1
- printk_debug("%s [%04x/%04x] %sops\n",
- dev_path(dev),
- driver->vendor, driver->device,
- (driver->ops->scan_bus?"bus ":"")
- );
-#endif
+
+ printk_debug("%s [%04x/%04x] %sops\n", dev_path(dev),
+ driver->vendor, driver->device,
+ (driver->ops->scan_bus?"bus ":""));
+
return;
}
}
+
/* If I don't have a specific driver use the default operations */
switch(dev->hdr_type & 0x7f) { /* header type */
case PCI_HEADER_TYPE_NORMAL: /* standard header */
@@ -454,27 +472,35 @@ static void set_pci_ops(struct device *dev)
bad:
if (dev->enable) {
printk_err("%s [%04x/%04x/%06x] has unknown header "
- "type %02x, ignoring.\n",
- dev_path(dev),
- dev->vendor, dev->device,
- dev->class >> 8, dev->hdr_type);
+ "type %02x, ignoring.\n",
+ dev_path(dev),
+ dev->vendor, dev->device,
+ dev->class >> 8, dev->hdr_type);
}
}
return;
}
/**
- * Given a bus and a devfn number, find the device structure
- * @param bus The bus structure
+ * @brief Find a specific device structure on a list of device structures
+ *
+ * Given a linked list of PCI device structures and a devfn number, find the
+ * device structure correspond to the devfn.
+ *
+ * @param list the device structure list
* @param devfn a device/function number
- * @return pointer to the device structure
+ *
+ * @return pointer to the device structure found
*/
-static struct device *pci_scan_get_dev(struct device **list, unsigned int devfn)
+static struct device *pci_scan_get_dev(struct device **list,
+ unsigned int devfn)
{
struct device *dev = 0;
- for(; *list; list = &(*list)->sibling) {
+
+ for (; *list; list = &(*list)->sibling) {
if ((*list)->path.type != DEVICE_PATH_PCI) {
- printk_err("child %s not a pci device\n", dev_path(*list));
+ printk_err("child %s not a pci device\n",
+ dev_path(*list));
continue;
}
if ((*list)->path.u.pci.devfn == devfn) {
@@ -485,10 +511,13 @@ static struct device *pci_scan_get_dev(struct device **list, unsigned int devfn)
break;
}
}
+
+ /* FIXME: why are we doing this ? Isn't there some order between the
+ * structures before ? */
if (dev) {
device_t child;
/* Find the last child of our parent */
- for(child = dev->bus->children; child && child->sibling; ) {
+ for (child = dev->bus->children; child && child->sibling; ) {
child = child->sibling;
}
/* Place the device on the list of children of it's parent. */
@@ -502,16 +531,24 @@ static struct device *pci_scan_get_dev(struct device **list, unsigned int devfn)
return dev;
}
-/** Scan the pci bus devices and bridges.
+/**
+ * @brief Scan a PCI bus
+ *
+ * Determine the existence of devices and bridges on a PCI bus. If there are
+ * bridges on the bus, recursively scan the buses behind the bridges.
+ *
+ * This function is the default scan_bus() method for the root device
+ * 'dev_root'.
+ *
* @param bus pointer to the bus structure
* @param min_devfn minimum devfn to look at in the scan usually 0x00
* @param max_devfn maximum devfn to look at in the scan usually 0xff
* @param max current bus number
+ *
* @return The maximum bus number found, after scanning all subordinate busses
*/
-unsigned int pci_scan_bus(struct bus *bus,
- unsigned min_devfn, unsigned max_devfn,
- unsigned int max)
+unsigned int pci_scan_bus(struct bus *bus, unsigned min_devfn,
+ unsigned max_devfn, unsigned int max)
{
unsigned int devfn;
device_t dev;
@@ -524,42 +561,50 @@ unsigned int pci_scan_bus(struct bus *bus,
bus->children = 0;
post_code(0x24);
-
- /* probe all devices on this bus with some optimization for non-existance and
- single funcion devices */
+ /* probe all devices on this bus with some optimization for
+ * non-existence and single funcion devices */
for (devfn = min_devfn; devfn <= max_devfn; devfn++) {
uint32_t id, class;
uint8_t hdr_type;
- /* First thing setup the device structure */
+ /* device structures for PCI devices associated with static
+ * devices are already created during the static device
+ * enumeration, find out if it is the case for this devfn */
dev = pci_scan_get_dev(&old_devices, devfn);
-
- /* Detect if a device is present */
+
if (!dev) {
+ /* it's not associated with a static device, detect if
+ * this device is present */
struct device dummy;
dummy.bus = bus;
dummy.path.type = DEVICE_PATH_PCI;
dummy.path.u.pci.devfn = devfn;
id = pci_read_config32(&dummy, PCI_VENDOR_ID);
/* some broken boards return 0 if a slot is empty: */
- if ( (id == 0xffffffff) || (id == 0x00000000) ||
- (id == 0x0000ffff) || (id == 0xffff0000))
- {
- printk_spew("PCI: devfn 0x%x, bad id 0x%x\n", devfn, id);
+ if ((id == 0xffffffff) || (id == 0x00000000) ||
+ (id == 0x0000ffff) || (id == 0xffff0000)) {
+ printk_spew("PCI: devfn 0x%x, bad id 0x%x\n",
+ devfn, id);
if (PCI_FUNC(devfn) == 0x00) {
- /* if this is a function 0 device and it is not present,
- skip to next device */
+ /* if this is a function 0 device and
+ * it is not present, skip to next
+ * device */
devfn += 0x07;
}
- /* multi function device, skip to next function */
+ /* this function in a multi function device is
+ * not present, skip to next function */
continue;
}
dev = alloc_dev(bus, &dummy.path);
- }
- else {
- /* Run the magic enable sequence for the device */
- if (dev->chip && dev->chip->control && dev->chip->control->enable_dev) {
+ } else {
+ /* Run the magic enable/disable sequence for the
+ * device */
+ /* FIXME: What happen if this PCI device listed as
+ * static device but does not exist ? This calls
+ * some arbitray code without any justification */
+ if (dev->chip && dev->chip->control &&
+ dev->chip->control->enable_dev) {
int enable = dev->enable;
dev->enable = 1;
dev->chip->control->enable_dev(dev);
@@ -580,14 +625,15 @@ unsigned int pci_scan_bus(struct bus *bus,
dev->class = class >> 8;
/* Look at the vendor and device id, or at least the
- * header type and class and figure out which set of configuration
- * methods to use. Unless we already have some pci ops.
+ * header type and class and figure out which set of
+ * configuration methods to use. Unless we already
+ * have some pci ops.
*/
set_pci_ops(dev);
/* Error if we don't have some pci operations for it */
if (!dev->ops) {
printk_err("%s No device operations\n",
- dev_path(dev));
+ dev_path(dev));
continue;
}
@@ -600,24 +646,28 @@ unsigned int pci_scan_bus(struct bus *bus,
}
printk_debug("%s [%04x/%04x] %s\n",
- dev_path(dev),
- dev->vendor, dev->device,
- dev->enable?"enabled": "disabled");
+ dev_path(dev),
+ dev->vendor, dev->device,
+ dev->enable?"enabled": "disabled");
if (PCI_FUNC(devfn) == 0x00 && (hdr_type & 0x80) != 0x80) {
- /* if this is not a multi function device, don't waste time probe
- another function. Skip to next device. */
+ /* if this is not a multi function device, don't
+ * waste time probe another function.
+ * Skip to next device. */
devfn += 0x07;
}
}
post_code(0x25);
- for(child = bus->children; child; child = child->sibling) {
+ /* if the child provides scan_bus(), for example a bridge, scan the
+ * bus behind that child */
+ for (child = bus->children; child; child = child->sibling) {
if (!child->ops->scan_bus) {
continue;
}
max = child->ops->scan_bus(child, max);
}
+
/*
* We've scanned the bus and so we know all about what's on
* the other side of any bridges that may be on this bus plus
@@ -630,8 +680,17 @@ unsigned int pci_scan_bus(struct bus *bus,
return max;
}
-/** Scan the bus, first for bridges and next for devices.
- * @param pci_bus pointer to the bus structure
+/**
+ * @brief Scan a PCI bridge and the buses behind the bridge.
+ *
+ * Determine the existence of buses behind the bridge. Set up the bridge
+ * according to the result of the scan.
+ *
+ * This function is the default scan_bus() method for PCI bridge devices.
+ *
+ * @param dev pointer to the bridge device
+ * @param max the highest bus number assgined up to now
+ *
* @return The maximum bus number found, after scanning all subordinate busses
*/
unsigned int pci_scan_bridge(struct device *dev, unsigned int max)
@@ -645,47 +704,44 @@ unsigned int pci_scan_bridge(struct device *dev, unsigned int max)
/* Set up the primary, secondary and subordinate bus numbers. We have
* no idea how many buses are behind this bridge yet, so we set the
- * subordinate bus number to 0xff for the moment
- */
+ * subordinate bus number to 0xff for the moment. */
bus->secondary = ++max;
bus->subordinate = 0xff;
-
+
/* Clear all status bits and turn off memory, I/O and master enables. */
cr = pci_read_config16(dev, PCI_COMMAND);
pci_write_config16(dev, PCI_COMMAND, 0x0000);
pci_write_config16(dev, PCI_STATUS, 0xffff);
- /*
- * Read the existing primary/secondary/subordinate bus
- * number configuration.
- */
+ /* Read the existing primary/secondary/subordinate bus
+ * number configuration. */
buses = pci_read_config32(dev, PCI_PRIMARY_BUS);
/* Configure the bus numbers for this bridge: the configuration
* transactions will not be propagated by the bridge if it is not
- * correctly configured
- */
+ * correctly configured */
buses &= 0xff000000;
buses |= (((unsigned int) (dev->bus->secondary) << 0) |
- ((unsigned int) (bus->secondary) << 8) |
- ((unsigned int) (bus->subordinate) << 16));
+ ((unsigned int) (bus->secondary) << 8) |
+ ((unsigned int) (bus->subordinate) << 16));
pci_write_config32(dev, PCI_PRIMARY_BUS, buses);
- /* Now we can scan all subordinate buses i.e. the bus hehind the bridge */
+ /* Now we can scan all subordinate buses i.e. the buses behind the
+ * bridge */
max = pci_scan_bus(bus, 0x00, 0xff, max);
/* We know the number of buses behind this bridge. Set the subordinate
- * bus number to its real value
- */
+ * bus number to its real value */
bus->subordinate = max;
buses = (buses & 0xff00ffff) |
((unsigned int) (bus->subordinate) << 16);
pci_write_config32(dev, PCI_PRIMARY_BUS, buses);
pci_write_config16(dev, PCI_COMMAND, cr);
-
+
printk_spew("%s returns max %d\n", __FUNCTION__, max);
return max;
}
+
/*
Tell the EISA int controller this int must be level triggered
THIS IS A KLUDGE -- sorry, this needs to get cleaned up.
diff --git a/src/devices/root_device.c b/src/devices/root_device.c
index 4a076a1bb3..0bf5ea60a8 100644
--- a/src/devices/root_device.c
+++ b/src/devices/root_device.c
@@ -21,9 +21,9 @@ void root_dev_read_resources(device_t root)
root->resource[res].flags = IORESOURCE_IO;
root->resource[res].index = 0;
printk_spew("%s . link %p, resource %p\n", __FUNCTION__,
- &root->link[0], &root->resource[res]);
+ &root->link[0], &root->resource[res]);
compute_allocate_resource(&root->link[0], &root->resource[res],
- IORESOURCE_IO, IORESOURCE_IO);
+ IORESOURCE_IO, IORESOURCE_IO);
res++;
/* Initialize the system wide memory resources constraints */
@@ -35,9 +35,9 @@ void root_dev_read_resources(device_t root)
root->resource[res].flags = IORESOURCE_MEM;
root->resource[res].index = 1;
printk_spew("%s . link %p, resource %p\n", __FUNCTION__,
- &root->link[0], &root->resource[res]);
+ &root->link[0], &root->resource[res]);
compute_allocate_resource(&root->link[0], &root->resource[res],
- IORESOURCE_MEM, IORESOURCE_MEM);
+ IORESOURCE_MEM, IORESOURCE_MEM);
res++;
root->resources = res;
@@ -51,12 +51,12 @@ void root_dev_read_resources(device_t root)
*/
void root_dev_set_resources(device_t root)
{
- struct bus *bus;
- bus = &root->link[0];
- compute_allocate_resource(bus,
- &root->resource[0], IORESOURCE_IO, IORESOURCE_IO);
- compute_allocate_resource(bus,
- &root->resource[1], IORESOURCE_MEM, IORESOURCE_MEM);
+ struct bus *bus = &root->link[0];
+
+ compute_allocate_resource(bus, &root->resource[0],
+ IORESOURCE_IO, IORESOURCE_IO);
+ compute_allocate_resource(bus, &root->resource[1],
+ IORESOURCE_MEM, IORESOURCE_MEM);
assign_resources(bus);
}
@@ -71,18 +71,18 @@ unsigned int walk_static_devices(device_t bus, unsigned int max)
{
device_t child;
unsigned link;
- for(link = 0; link < bus->links; link++) {
- for(child = bus->link[link].children; child; child = child->sibling) {
+
+ for (link = 0; link < bus->links; link++) {
+ for (child = bus->link[link].children; child; child = child->sibling) {
if (child->ops && child->ops->enable) {
child->ops->enable(child);
}
- printk_debug("%s %s\n",
- dev_path(child),
- child->enable?"enabled": "disabled");
+ printk_debug("%s %s\n", dev_path(child),
+ child->enable?"enabled": "disabled");
}
}
- for(link = 0; link < bus->links; link++) {
- for(child = bus->link[link].children; child; child = child->sibling) {
+ for (link = 0; link < bus->links; link++) {
+ for (child = bus->link[link].children; child; child = child->sibling) {
if (!child->ops || !child->ops->scan_bus)
continue;
printk_debug("%s scanning...\n", dev_path(child));
@@ -95,9 +95,9 @@ unsigned int walk_static_devices(device_t bus, unsigned int max)
void enable_childrens_resources(device_t dev)
{
unsigned link;
- for(link = 0; link < dev->links; link++) {
+ for (link = 0; link < dev->links; link++) {
device_t child;
- for(child = dev->link[link].children; child; child = child->sibling) {
+ for (child = dev->link[link].children; child; child = child->sibling) {
enable_resources(child);
}
}
diff --git a/src/include/device/device.h b/src/include/device/device.h
index 20d9c22298..38efe53adc 100644
--- a/src/include/device/device.h
+++ b/src/include/device/device.h
@@ -46,6 +46,7 @@ struct device {
unsigned short device;
unsigned int class; /* 3 bytes: (base,sub,prog-if) */
unsigned int hdr_type; /* PCI header type */
+ /* @todo rename this to 'enabled' */
unsigned int enable : 1; /* set if we should enable the device */
uint8_t command;
diff --git a/src/include/device/pci.h b/src/include/device/pci.h
index aa6778c504..ef18cb40ee 100644
--- a/src/include/device/pci.h
+++ b/src/include/device/pci.h
@@ -28,7 +28,9 @@ struct pci_driver {
};
#define __pci_driver __attribute__ ((unused,__section__(".rodata.pci_driver")))
+/** start of compile time generated pci driver array */
extern struct pci_driver pci_drivers[];
+/** end of compile time generated pci driver array */
extern struct pci_driver epci_drivers[];
diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb
index f30d6aa0c5..7ff42d0189 100644
--- a/src/mainboard/tyan/s2885/Config.lb
+++ b/src/mainboard/tyan/s2885/Config.lb
@@ -6,17 +6,19 @@ uses LB_CKS_RANGE_END
uses LB_CKS_LOC
uses MAINBOARD
uses ARCH
+
#
#
###
### Set all of the defaults for an x86 architecture
###
+
#
#
###
### Build the objects we have code for in this directory.
###
-##object mainboard.o
+
config chip.h
register "fixup_scsi" = "1"
register "fixup_vga" = "1"
@@ -38,9 +40,10 @@ driver mainboard.o
object reset.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
+
#
arch i386 end
-#cpu k8 end
+
#
###
### Build our 16 bit and 32 bit linuxBIOS entry code
@@ -50,6 +53,7 @@ mainboardinit cpu/i386/entry32.inc
mainboardinit cpu/i386/bist32.inc
ldscript /cpu/i386/entry16.lds
ldscript /cpu/i386/entry32.lds
+
#
###
### Build our reset vector (This is where linuxBIOS is entered)
@@ -120,24 +124,30 @@ end
makerule ./failover.inc
depends "./romcc ./failover.E"
- action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end
+ action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"
+end
makerule ./auto.E
depends "$(MAINBOARD)/auto.c option_table.h"
action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
end
+
makerule ./auto.inc
depends "./romcc ./auto.E"
action "./romcc -O -mcpu=k8 -o auto.inc --label-prefix=auto ./auto.E"
# action "./romcc -mcpu=k8 -O ./auto.E > auto.inc"
end
+
mainboardinit cpu/k8/enable_mmx_sse.inc
mainboardinit ./auto.inc
mainboardinit cpu/k8/disable_mmx_sse.inc
+
#
###
### Include the secondary Configuration files
###
+dir /pc80
+
northbridge amd/amdk8 "mc0"
pci 0:18.0
pci 0:18.0
@@ -203,7 +213,7 @@ northbridge amd/amdk8 "mc1"
pci 0:19.2
pci 0:19.3
end
-
+
dir /pc80
#dir /bioscall
diff --git a/src/mainboard/via/epia/Config.lb b/src/mainboard/via/epia/Config.lb
index 8fb365926f..0450b2b1b9 100644
--- a/src/mainboard/via/epia/Config.lb
+++ b/src/mainboard/via/epia/Config.lb
@@ -78,7 +78,8 @@ default HEAP_SIZE=0x4000
##
## Only use the option table in a normal image
##
-default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+default USE_OPTION_TABLE = 0
##
## Compute the location and size of where this firmware image
diff --git a/src/mainboard/via/epia/auto.c b/src/mainboard/via/epia/auto.c
index 5981d32759..3e40d04e8a 100644
--- a/src/mainboard/via/epia/auto.c
+++ b/src/mainboard/via/epia/auto.c
@@ -1,8 +1,5 @@
#define ASSEMBLY 1
-//#define MAXIMUM_CONSOLE_LOGLEVEL 6
-//#define DEFAULT_CONSOLE_LOGLEVEL 6
-
#include <stdint.h>
#include <device/pci_def.h>
#include <cpu/p6/apic.h>
@@ -15,6 +12,7 @@
#include "ram/ramtest.c"
#include "northbridge/via/vt8601/raminit.h"
#include "cpu/p6/earlymtrr.c"
+
/*
*/
void udelay(int usecs)
diff --git a/src/northbridge/amd/amdk8/early_ht.c b/src/northbridge/amd/amdk8/early_ht.c
index 90f258e1bc..be79545531 100644
--- a/src/northbridge/amd/amdk8/early_ht.c
+++ b/src/northbridge/amd/amdk8/early_ht.c
@@ -16,8 +16,8 @@ static int enumerate_ht_chain(void)
id = pci_read_config32(PCI_DEV(0,0,0), PCI_VENDOR_ID);
/* If the chain is enumerated quit */
if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
+ (((id >> 16) & 0xffff) == 0xffff) ||
+ (((id >> 16) & 0xffff) == 0x0000)) {
break;
}
hdr_type = pci_read_config8(PCI_DEV(0,0,0), PCI_HEADER_TYPE);
@@ -25,7 +25,7 @@ static int enumerate_ht_chain(void)
hdr_type &= 0x7f;
if ((hdr_type == PCI_HEADER_TYPE_NORMAL) ||
- (hdr_type == PCI_HEADER_TYPE_BRIDGE)) {
+ (hdr_type == PCI_HEADER_TYPE_BRIDGE)) {
pos = pci_read_config8(PCI_DEV(0,0,0), PCI_CAPABILITY_LIST);
}
while(pos != 0) {
diff --git a/src/northbridge/amd/amdk8/northbridge.c b/src/northbridge/amd/amdk8/northbridge.c
index 12d8f73c0b..d63f416717 100644
--- a/src/northbridge/amd/amdk8/northbridge.c
+++ b/src/northbridge/amd/amdk8/northbridge.c
@@ -42,7 +42,7 @@ struct mem_range *sizeram(void)
printk_debug("mmio_base: %dKB\n", mmio_basek);
#endif
- for(idx = i = 0; i < 8; i++) {
+ for (idx = i = 0; i < 8; i++) {
uint32_t base, limit;
unsigned basek, limitk, sizek;
base = pci_read_config32(dev, 0x40 + (i<<3));
@@ -54,18 +54,18 @@ struct mem_range *sizeram(void)
limitk = ((limit + 0x00010000) & 0xffff0000) >> 2;
sizek = limitk - basek;
if ((idx > 0) &&
- ((mem[idx -1].basek + mem[idx - 1].sizek) == basek)) {
+ ((mem[idx - 1].basek + mem[idx - 1].sizek) == basek)) {
mem[idx -1].sizek += sizek;
- }
- else {
+ } else {
mem[idx].basek = basek;
mem[idx].sizek = sizek;
idx++;
}
/* see if we need a hole from 0xa0000 to 0xbffff */
- if((mem[idx-1].basek < ((8*64)+(8*16))) &&
- (mem[idx-1].sizek > ((8*64)+(16*16)))) {
+ if ((mem[idx-1].basek < ((8*64)+(8*16))) /* 640 */ &&
+ (mem[idx-1].sizek > ((8*64)+(16*16))) /* 768 */ ) {
+#warning "FIXME: this left 0xA0000 to 0xBFFFF undefined"
mem[idx].basek = (8*64)+(16*16);
mem[idx].sizek = mem[idx-1].sizek - ((8*64)+(16*16));
mem[idx-1].sizek = ((8*64)+(8*16)) - mem[idx-1].basek;
@@ -74,7 +74,7 @@ struct mem_range *sizeram(void)
/* See if I need to split the region to accomodate pci memory space */
if ((mem[idx - 1].basek <= mmio_basek) &&
- ((mem[idx - 1].basek + mem[idx - 1].sizek) > mmio_basek)) {
+ ((mem[idx - 1].basek + mem[idx - 1].sizek) > mmio_basek)) {
if (mem[idx - 1].basek < mmio_basek) {
unsigned pre_sizek;
pre_sizek = mmio_basek - mem[idx - 1].basek;
@@ -92,10 +92,10 @@ struct mem_range *sizeram(void)
}
}
}
-#if 0
- for(i = 0; i < idx; i++) {
+#if 1
+ for (i = 0; i < idx; i++) {
printk_debug("mem[%d].basek = %08x mem[%d].sizek = %08x\n",
- i, mem[i].basek, i, mem[i].sizek);
+ i, mem[i].basek, i, mem[i].sizek);
}
#endif
while(idx < sizeof(mem)/sizeof(mem[0])) {
@@ -514,6 +514,40 @@ static void mcf0_control_init(struct device *dev)
printk_debug("done.\n");
}
+
+static void amdk8_enable_resources(struct device *dev)
+{
+ uint16_t ctrl;
+ unsigned link;
+ unsigned int vgalink = -1;
+
+ ctrl = pci_read_config16(dev, PCI_BRIDGE_CONTROL);
+ ctrl |= dev->link[0].bridge_ctrl;
+ printk_debug("%s bridge ctrl <- %04x\n", dev_path(dev), ctrl);
+ printk_err("%s bridge ctrl <- %04x\n", dev_path(dev), ctrl);
+ pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl);
+
+#if 0
+ /* let's see what link VGA is on */
+ for(link = 0; link < dev->links; link++) {
+ device_t child;
+ printk_err("Kid %d of k8: bridge ctrl says: 0x%x\n",
+ link, dev->link[link].bridge_ctrl);
+ if (dev->link[link].bridge_ctrl & PCI_BRIDGE_CTL_VGA)
+ vgalink = link;
+ }
+
+ if (vgalink != 1) {
+ /* now find the IOPAIR that goes to vgalink and set the vga enable in the base part (0x30) */
+ /* now allocate an MMIOPAIR and point it to the CPU0, LINK=vgalink */
+ /* now set IORR1 so it has a hole for the 0xa0000-0xcffff region */
+ }
+#endif
+
+ pci_dev_enable_resources(dev);
+ //enable_childrens_resources(dev);
+}
+
static struct device_operations northbridge_operations = {
.read_resources = amdk8_read_resources,
.set_resources = amdk8_set_resources,
diff --git a/src/northbridge/amd/amdk8/raminit.c b/src/northbridge/amd/amdk8/raminit.c
index e5bcb2d02f..fac24d7beb 100644
--- a/src/northbridge/amd/amdk8/raminit.c
+++ b/src/northbridge/amd/amdk8/raminit.c
@@ -5,10 +5,12 @@
#if (CONFIG_LB_MEM_TOPK & (CONFIG_LB_MEM_TOPK -1)) != 0
# error "CONFIG_LB_MEM_TOPK must be a power of 2"
#endif
+
static void setup_resource_map(const unsigned int *register_values, int max)
{
int i;
print_debug("setting up resource map....");
+
#if 0
print_debug("\r\n");
#endif
diff --git a/src/southbridge/amd/amd8111/amd8111.c b/src/southbridge/amd/amd8111/amd8111.c
index d3fdf3b7ba..ccf26b623e 100644
--- a/src/southbridge/amd/amd8111/amd8111.c
+++ b/src/southbridge/amd/amd8111/amd8111.c
@@ -15,7 +15,7 @@ void amd8111_enable(device_t dev)
/* See if we are on the behind the amd8111 pci bridge */
bus_dev = dev->bus->dev;
if ((bus_dev->vendor == PCI_VENDOR_ID_AMD) &&
- (bus_dev->device == PCI_DEVICE_ID_AMD_8111_PCI)) {
+ (bus_dev->device == PCI_DEVICE_ID_AMD_8111_PCI)) {
unsigned devfn;
devfn = bus_dev->path.u.pci.devfn + (1 << 3);
lpc_dev = dev_find_slot(bus_dev->bus->secondary, devfn);
@@ -26,11 +26,12 @@ void amd8111_enable(device_t dev)
lpc_dev = dev_find_slot(dev->bus->secondary, devfn);
index = dev->path.u.pci.devfn & 7;
}
+
if ((!lpc_dev) || (index >= 16)) {
return;
}
if ((lpc_dev->vendor != PCI_VENDOR_ID_AMD) ||
- (lpc_dev->device != PCI_DEVICE_ID_AMD_8111_ISA)) {
+ (lpc_dev->device != PCI_DEVICE_ID_AMD_8111_ISA)) {
uint32_t id;
id = pci_read_config32(lpc_dev, PCI_VENDOR_ID);
if (id != (PCI_VENDOR_ID_AMD | (PCI_DEVICE_ID_AMD_8111_ISA << 16))) {
@@ -48,6 +49,6 @@ void amd8111_enable(device_t dev)
}
struct chip_control southbridge_amd_amd8111_control = {
- .name = "AMD 8111",
+ .name = "AMD 8111 Southbridge",
.enable_dev = amd8111_enable,
};