diff options
| author | Roy Mingi Park <roy.mingi.park@intel.com> | 2018-10-10 15:07:59 -0700 |
|---|---|---|
| committer | Patrick Georgi <pgeorgi@google.com> | 2018-10-17 11:59:54 +0000 |
| commit | 9814f8f037d4735f2f45b586c20573238d659b31 (patch) | |
| tree | 985f028b114fc47b2b52e76d060fec4b88e82c0c /src | |
| parent | 6c96542a3e7936bcad6e2ea683f9244383a36f59 (diff) | |
| download | coreboot-9814f8f037d4735f2f45b586c20573238d659b31.tar.xz | |
mb/google/poppy/variants/nocturne: Disable pull-down of GPP_E9/E10
While these pins were set to a pull-down 20KOhm, NPCX EC consumes
~2.1mW higher power. Becasue there was leakage current on both GPIO67
and GPIO70 from NPCX EC. With the external pull-up 10KOhm for
USB_OC0#/USB2_OC1#, this wasn't enough to prevent leakage current.
BUG=b:117139495
TEST=Check nxpc EC power to see power improvement
Change-Id: I685d876461c263f07ca4c8f8046635cb7087279c
Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com>
Reviewed-on: https://review.coreboot.org/29007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Diffstat (limited to 'src')
| -rw-r--r-- | src/mainboard/google/poppy/variants/nocturne/gpio.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/src/mainboard/google/poppy/variants/nocturne/gpio.c b/src/mainboard/google/poppy/variants/nocturne/gpio.c index 8f87705073..16ff982529 100644 --- a/src/mainboard/google/poppy/variants/nocturne/gpio.c +++ b/src/mainboard/google/poppy/variants/nocturne/gpio.c @@ -229,9 +229,9 @@ static const struct pad_config gpio_table[] = { /* E8 : SATALED# ==> NC */ PAD_CFG_NC(GPP_E8), /* E9 : USB2_OCO# ==> USB_C0_OC_ODL */ - PAD_CFG_NF(GPP_E9, 20K_PD, DEEP, NF1), + PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), /* E10 : USB2_OC1# ==> USB_C1_OC_ODL */ - PAD_CFG_NF(GPP_E10, 20K_PD, DEEP, NF1), + PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), /* E11 : USB2_OC2# ==> TOUCHSCREEN_RESET_L */ PAD_CFG_TERM_GPO(GPP_E11, 0, 20K_PD, DEEP), /* E12 : USB2_OC3# ==> NC */ |