fixes for tyan

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1392 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

26 files changed, 976 insertions, 575 deletions

diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb
index 87f54b925b..9c0b9e0a2f 100644
--- a/src/mainboard/tyan/s2880/Config.lb
+++ b/src/mainboard/tyan/s2880/Config.lb
@@ -1,6 +1,9 @@
 uses HAVE_MP_TABLE
 uses HAVE_PIRQ_TABLE
 uses USE_FALLBACK_IMAGE
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
 uses MAINBOARD
 uses ARCH
 #
@@ -13,29 +16,35 @@ uses ARCH
 ###
 ### Build the objects we have code for in this directory.
 ###
-##object mainboard.o
 config chip.h
 register "fixup_scsi" = "1" 
 register "fixup_vga" = "1"
 
+##
+## Move the default LinuxBIOS cmos range off of AMD RTC registers
+##
+default LB_CKS_RANGE_START=49
+default LB_CKS_RANGE_END=122
+default LB_CKS_LOC=123
+
 
 driver mainboard.o
-driver lsi_scsi.o
-driver adaptec_scsi.o
-driver promise_sata.o
-driver intel_nic.o
+#driver lsi_scsi.o
+#driver adaptec_scsi.o
+#driver promise_sata.o
+#driver intel_nic.o
 object reset.o
 if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
 #
 arch i386 end
-#cpu k8 end
 #
 ###
 ### Build our 16 bit and 32 bit linuxBIOS entry code
 ###
 mainboardinit cpu/i386/entry16.inc
 mainboardinit cpu/i386/entry32.inc
+mainboardinit cpu/i386/bist32.inc
 ldscript /cpu/i386/entry16.lds
 ldscript /cpu/i386/entry32.lds
 #
@@ -87,28 +96,13 @@ end
 ###
 ### Setup the serial port
 ###
-#mainboardinit superiowinbond/w83627hf/setup_serial.inc
 mainboardinit pc80/serial.inc
 mainboardinit arch/i386/lib/console.inc
-#
-####
-#### O.k. We aren't just an intermediary anymore!
-####
-#
-###
-### When debugging disable the watchdog timer
-###
-##option MAXIMUM_CONSOLE_LOGLEVEL=7
-#default MAXIMUM_CONSOLE_LOGLEVEL=7
-#
-#if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc  end
+mainboardinit cpu/i386/bist32_fail.inc
 #
 ###
 ### Romcc output
 ###
-#makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E"
-#makerule ./failover.inc dep "./romcc ./failover.E" act "./romcc -O ./failover.E > failover.inc"
-#mainboardinit .failover.inc
 
 makerule ./failover.E
 	depends "$(MAINBOARD)/failover.c" 
@@ -120,8 +114,8 @@ makerule ./failover.inc
 	action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end
 
 makerule ./auto.E 
-	depends	"$(MAINBOARD)/auto.c" 
-	action	"$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
+        depends "$(MAINBOARD)/auto.c option_table.h"
+	action	"$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
 end
 makerule ./auto.inc 
 	depends "./romcc ./auto.E"
@@ -160,6 +154,31 @@ northbridge amd/amdk8 "mc0"
                 pci 1:0.1 on
                 pci 1:0.2 on
                 pci 1:1.0 off
+                superio winbond/w83627hf link 1
+                        pnp 2e.0 off # 	Floppy
+                                 io 0x60 = 0x3f0
+                                irq 0x70 = 6
+                                drq 0x74 = 2
+                        pnp 2e.1 off #  Parallel Port
+                                 io 0x60 = 0x378
+                                irq 0x70 = 7
+                        pnp 2e.2 on #  Com1
+                                 io 0x60 = 0x3f8
+                                irq 0x70 = 4
+                        pnp 2e.3 off #  Com2
+                                 io 0x60 = 0x2f8
+                                irq 0x70 = 3
+                        pnp 2e.5 on #  Keyboard
+                                 io 0x60 = 0x60
+                                 io 0x62 = 0x64
+                                irq 0x70 = 1
+                        pnp 2e.6 off #  CIR
+                        pnp 2e.7 off #  GAME_MIDI_GIPO1
+                        pnp 2e.8 off #  GPIO2
+                        pnp 2e.9 off #  GPIO3
+                        pnp 2e.a off #  ACPI
+                        pnp 2e.b off #  HW Monitor
+                end
         end
 end
 
@@ -173,21 +192,8 @@ northbridge amd/amdk8 "mc1"
 end
 
 
-#northbridge amd/amdk8
-#end
-#southbridge amd/amd8111 "amd8111"
-#end
-#southbridge amd/amd8131 "amd8131"
-#end
-#mainboardinit archi386/smp/secondary.inc
-#superio NSC/pc87360
-#	register "com1" = "{1}"
-#	register "lpt" = "{1}"
-#end
 dir /pc80
-##dir /src/superio/winbond/w83627hf
 #dir /bioscall
-#dir /cpu/k8
 cpu k8 "cpu0"
   register "up" = "{.chip = &amd8131, .ht_width=16, .ht_speed=600}"
 end
diff --git a/src/mainboard/tyan/s2880/auto.c b/src/mainboard/tyan/s2880/auto.c
index 2d3f1fb3ae..c1d9d7e574 100644
--- a/src/mainboard/tyan/s2880/auto.c
+++ b/src/mainboard/tyan/s2880/auto.c
@@ -1,13 +1,17 @@
 #define ASSEMBLY 1
+
 #include <stdint.h>
 #include <device/pci_def.h>
-#include <cpu/p6/apic.h>
 #include <arch/io.h>
+#include <device/pnp_def.h>
 #include <arch/romcc_io.h>
+#include <arch/smp/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
 #include "pc80/serial.c"
 #include "arch/i386/lib/console.c"
 #include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/early_ht.c"
+#include "northbridge/amd/amdk8/incoherent_ht.c"
 #include "southbridge/amd/amd8111/amd8111_early_smbus.c"
 #include "northbridge/amd/amdk8/raminit.h"
 #include "cpu/k8/apic_timer.c"
@@ -16,8 +20,25 @@
 #include "northbridge/amd/amdk8/reset_test.c"
 #include "debug.c"
 #include "northbridge/amd/amdk8/cpu_rev.c"
+#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
 
+static void hard_reset(void)
+{
+        set_bios_reset();
+
+        /* enable cf9 */
+        pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
+        /* reset */
+        outb(0x0e, 0x0cf9);
+}
 
+static void soft_reset(void)
+{
+        set_bios_reset();
+        pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
+}
 #define REV_B_RESET 0
 static void memreset_setup(void)
 {
@@ -95,45 +116,10 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 /* include mainboard specific ht code */
 #include "hypertransport.c"
 
-//#include "northbridge/amd/amdk8/cpu_ldtstop.c"
-//#include "southbridge/amd/amd8111/amd8111_ldtstop.c"
-
 #include "northbridge/amd/amdk8/raminit.c"
 #include "northbridge/amd/amdk8/coherent_ht.c"
 #include "sdram/generic_sdram.c"
 
-static void enable_lapic(void)
-{
-	msr_t msr;
-	msr = rdmsr(0x1b);
-	msr.hi &= 0xffffff00;
-	msr.lo &= 0x000007ff;
-	msr.lo |= APIC_DEFAULT_BASE | (1 << 11);
-	wrmsr(0x1b, msr);
-}
-
-static void stop_this_cpu(void)
-{
-	unsigned apicid;
-	apicid = apic_read(APIC_ID) >> 24;
-
-	/* Send an APIC INIT to myself */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-	apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT);
-	/* Wait for the ipi send to finish */
-	apic_wait_icr_idle();
-
-	/* Deassert the APIC INIT */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-	apic_write(APIC_ICR,  APIC_INT_LEVELTRIG | APIC_DM_INIT);
-	/* Wait for the ipi send to finish */
-	apic_wait_icr_idle();
-
-	/* If I haven't halted spin forever */
-	for(;;) {
-		hlt();
-	}
-}
 #define FIRST_CPU  1
 #define SECOND_CPU 1
 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
@@ -163,21 +149,26 @@ static void main(void)
 		},
 #endif
 	};
-	if (cpu_init_detected()) {
-		asm("jmp __cpu_reset");
-	}
-	enable_lapic();
-	init_timer();
-	if (!boot_cpu() ) {
-//		notify_bsp_ap_is_stopped();
-		stop_this_cpu();
-	}
-	uart_init();
-	console_init();
-	setup_default_resource_map();
-	setup_coherent_ht_domain();
-	enumerate_ht_chain(0);
-	distinguish_cpu_resets(0);
+        int needs_reset;
+        enable_lapic();
+        init_timer();
+        if (cpu_init_detected()) {
+                asm("jmp __cpu_reset");
+        }
+        distinguish_cpu_resets();
+        if (!boot_cpu()) {
+                stop_this_cpu();
+        }
+        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+        uart_init();
+        console_init();
+        setup_default_resource_map();
+        needs_reset = setup_coherent_ht_domain();
+        needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
+        if (needs_reset) {
+                print_info("ht reset -");
+                soft_reset();
+        }
 	
 #if 0
 	print_pci_devices();
diff --git a/src/mainboard/tyan/s2880/cmos.layout b/src/mainboard/tyan/s2880/cmos.layout
index 5ba4c032c1..247715e6ac 100644
--- a/src/mainboard/tyan/s2880/cmos.layout
+++ b/src/mainboard/tyan/s2880/cmos.layout
@@ -29,6 +29,9 @@ entries
 386          1       e       1        ECC_memory
 388          4       r       0        reboot_bits
 392          3       e       5        baud_rate
+395          1       e       1        hw_scrubber
+396          1       e       1        interleave_chip_selects
+397          2       e       8        max_mem_clock
 400          1       e       1        power_on_after_fail
 412          4       e       6        debug_level
 416          4       e       7        boot_first
@@ -36,7 +39,14 @@ entries
 424          4       e       7        boot_third
 428          4       h       0        boot_index
 432	     8       h       0        boot_countdown
-1008         16      h       0        check_sum
+440          4       e       9        slow_cpu
+444          1       e       1        nmi
+728        256       h       0        user_data
+984         16       h       0        check_sum
+# Reserve the extended AMD configuration registers
+1000        24       r       0        reserved_memory
+
+
 
 enumerations
 
@@ -66,9 +76,21 @@ enumerations
 7     9     Fallback_HDD
 7     10    Fallback_Floppy
 #7     3     ROM
+8     0     200Mhz
+8     1     166Mhz
+8     2     133Mhz
+8     3     100Mhz
+9     0     off
+9     1     87.5%
+9     2     75.0%
+9     3     62.5%
+9     4     50.0%
+9     5     37.5%
+9     6     25.0%
+9     7     12.5%
 
 checksums
 
-checksum 392 1007 1008
+checksum 392 983 984
 
 
diff --git a/src/mainboard/tyan/s2880/failover.c b/src/mainboard/tyan/s2880/failover.c
index 8eeeaef7e1..b22abfea06 100644
--- a/src/mainboard/tyan/s2880/failover.c
+++ b/src/mainboard/tyan/s2880/failover.c
@@ -3,36 +3,78 @@
 #include <device/pci_def.h>
 #include <device/pci_ids.h>
 #include <arch/io.h>
-#include "arch/romcc_io.h"
+#include <arch/romcc_io.h>
+#include <arch/smp/lapic.h>
 #include "pc80/mc146818rtc_early.c"
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 #include "cpu/p6/boot_cpu.c"
 #include "northbridge/amd/amdk8/reset_test.c"
 
+#define HAVE_REGPARM_SUPPORT 0
+#if HAVE_REGPARM_SUPPORT
+static unsigned long main(unsigned long bist)
+{
+#else
 static void main(void)
 {
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain(0);
+	unsigned long bist = 0;
+#endif
+	/* Make cerain my local apic is useable */
+	enable_lapic();
 
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a cpu reset? */
+	/* Is this a cpu only reset? */
 	if (cpu_init_detected()) {
 		if (last_boot_normal()) {
-			asm("jmp __normal_image");
+			goto normal_image;
 		} else {
-			asm("jmp __cpu_reset");
+			goto cpu_reset;
 		}
 	}
 	/* Is this a secondary cpu? */
-	else if (!boot_cpu() && last_boot_normal()) {
-		asm("jmp __normal_image");
+	if (!boot_cpu()) {
+		if (last_boot_normal()) {
+			goto normal_image;
+		} else {
+			goto fallback_image;
+		}
+	}
+	
+
+	/* Nothing special needs to be done to find bus 0 */
+	/* Allow the HT devices to be found */
+	enumerate_ht_chain();
+	
+	/* Setup the 8111 */
+	amd8111_enable_rom();
+
+	/* Is this a deliberate reset by the bios */
+	if (bios_reset_detected() && last_boot_normal()) {
+		goto normal_image;
 	}
 	/* This is the primary cpu how should I boot? */
 	else if (do_normal_boot()) {
-		asm("jmp __normal_image");
+		goto normal_image;
+	}
+	else {
+		goto fallback_image;
 	}
+ normal_image:
+	asm("jmp __normal_image" 
+		: /* outputs */ 
+		: "a" (bist) /* inputs */
+		: /* clobbers */
+		);
+ cpu_reset:
+	asm("jmp __cpu_reset"
+		: /* outputs */ 
+		: "a"(bist) /* inputs */
+		: /* clobbers */
+		);
+ fallback_image:
+#if HAVE_REGPARM_SUPPORT
+	return bist;
+#else
+	return;
+#endif
 }
diff --git a/src/mainboard/tyan/s2881/Config.lb b/src/mainboard/tyan/s2881/Config.lb
index ed27ecc7fa..a89f1dbcf7 100644
--- a/src/mainboard/tyan/s2881/Config.lb
+++ b/src/mainboard/tyan/s2881/Config.lb
@@ -1,6 +1,9 @@
 uses HAVE_MP_TABLE
 uses HAVE_PIRQ_TABLE
 uses USE_FALLBACK_IMAGE
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
 uses MAINBOARD
 uses ARCH
 #
@@ -19,10 +22,19 @@ register "fixup_scsi" = "1"
 register "fixup_vga" = "1"
 
 
+##
+## Move the default LinuxBIOS cmos range off of AMD RTC registers
+##
+default LB_CKS_RANGE_START=49
+default LB_CKS_RANGE_END=122
+default LB_CKS_LOC=123
+
+
 driver mainboard.o
-driver adaptec_scsi.o
-driver si_sata.o
-driver intel_nic.o
+#driver adaptec_scsi.o
+#driver si_sata.o
+#driver intel_nic.o
+#driver broadcom_nic.o
 object reset.o
 if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
@@ -35,6 +47,7 @@ arch i386 end
 ###
 mainboardinit cpu/i386/entry16.inc
 mainboardinit cpu/i386/entry32.inc
+mainboardinit cpu/i386/bist32.inc
 ldscript /cpu/i386/entry16.lds
 ldscript /cpu/i386/entry32.lds
 #
@@ -86,23 +99,15 @@ end
 ###
 ### Setup the serial port
 ###
-#mainboardinit superiowinbond/w83627hf/setup_serial.inc
 mainboardinit pc80/serial.inc
 mainboardinit arch/i386/lib/console.inc
+mainboardinit cpu/i386/bist32_fail.inc
 #
 ####
 #### O.k. We aren't just an intermediary anymore!
 ####
 #
 ###
-### When debugging disable the watchdog timer
-###
-##option MAXIMUM_CONSOLE_LOGLEVEL=7
-#default MAXIMUM_CONSOLE_LOGLEVEL=7
-#
-#if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc  end
-#
-###
 ### Romcc output
 ###
 #makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E"
@@ -118,9 +123,9 @@ makerule ./failover.inc
 	depends "./romcc ./failover.E"
 	action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end
 
-makerule ./auto.E 
-	depends	"$(MAINBOARD)/auto.c" 
-	action	"$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
+makerule ./auto.E
+        depends "$(MAINBOARD)/auto.c option_table.h"
+        action  "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
 end
 makerule ./auto.inc 
 	depends "./romcc ./auto.E"
@@ -159,6 +164,31 @@ northbridge amd/amdk8 "mc0"
                 pci 1:0.1 on
                 pci 1:0.2 on
                 pci 1:1.0 off
+                superio winbond/w83627hf link 1
+                        pnp 2e.0 off #  Floppy
+                                 io 0x60 = 0x3f0
+                                irq 0x70 = 6
+                                drq 0x74 = 2
+                        pnp 2e.1 off #  Parallel Port
+                                 io 0x60 = 0x378
+                                irq 0x70 = 7
+                        pnp 2e.2 on #  Com1
+                                 io 0x60 = 0x3f8
+                                irq 0x70 = 4
+                        pnp 2e.3 off #  Com2
+                                 io 0x60 = 0x2f8
+                                irq 0x70 = 3
+                        pnp 2e.5 on #  Keyboard
+                                 io 0x60 = 0x60
+                                 io 0x62 = 0x64
+                                irq 0x70 = 1
+                        pnp 2e.6 off #  CIR
+                        pnp 2e.7 off #  GAME_MIDI_GIPO1
+                        pnp 2e.8 off #  GPIO2
+                        pnp 2e.9 off #  GPIO3
+                        pnp 2e.a off #  ACPI
+                        pnp 2e.b off #  HW Monitor
+                end
         end
 end
 
@@ -172,21 +202,8 @@ northbridge amd/amdk8 "mc1"
 end
 
 
-#northbridge amd/amdk8
-#end
-#southbridge amd/amd8111 "amd8111"
-#end
-#southbridge amd/amd8131 "amd8131"
-#end
-#mainboardinit archi386/smp/secondary.inc
-#superio NSC/pc87360
-#	register "com1" = "{1}"
-#	register "lpt" = "{1}"
-#end
 dir /pc80
-##dir /src/superio/winbond/w83627hf
 #dir /bioscall
-#dir /cpu/k8
 cpu k8 "cpu0"
   register "up" = "{.chip = &amd8131, .ht_width=16, .ht_speed=600}"
 end
diff --git a/src/mainboard/tyan/s2881/auto.c b/src/mainboard/tyan/s2881/auto.c
index fd481ccd04..1e0bdf2182 100644
--- a/src/mainboard/tyan/s2881/auto.c
+++ b/src/mainboard/tyan/s2881/auto.c
@@ -1,13 +1,16 @@
 #define ASSEMBLY 1
 #include <stdint.h>
-#include <device/pci_def.h>
-#include <cpu/p6/apic.h>
+#include <device/pci_def.h> 
 #include <arch/io.h>
+#include <device/pnp_def.h>
 #include <arch/romcc_io.h>
+#include <arch/smp/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
 #include "pc80/serial.c"
 #include "arch/i386/lib/console.c"
 #include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/early_ht.c"
+#include "northbridge/amd/amdk8/incoherent_ht.c"
 #include "southbridge/amd/amd8111/amd8111_early_smbus.c"
 #include "northbridge/amd/amdk8/raminit.h"
 #include "cpu/k8/apic_timer.c"
@@ -16,7 +19,25 @@
 #include "northbridge/amd/amdk8/reset_test.c"
 #include "debug.c"
 #include "northbridge/amd/amdk8/cpu_rev.c"
+#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
 
+#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+
+static void hard_reset(void)
+{
+        set_bios_reset();
+
+        /* enable cf9 */
+        pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
+        /* reset */
+        outb(0x0e, 0x0cf9);
+}
+
+static void soft_reset(void)
+{
+        set_bios_reset();
+        pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
+}
 
 #define REV_B_RESET 0
 static void memreset_setup(void)
@@ -95,47 +116,12 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 /* include mainboard specific ht code */
 #include "hypertransport.c"
 
-//#include "northbridge/amd/amdk8/cpu_ldtstop.c"
-//#include "southbridge/amd/amd8111/amd8111_ldtstop.c"
-
 #include "northbridge/amd/amdk8/raminit.c"
 #include "northbridge/amd/amdk8/coherent_ht.c"
 #include "sdram/generic_sdram.c"
 
 #include "resourcemap.c" /* tyan does not want the default */
 
-static void enable_lapic(void)
-{
-	msr_t msr;
-	msr = rdmsr(0x1b);
-	msr.hi &= 0xffffff00;
-	msr.lo &= 0x000007ff;
-	msr.lo |= APIC_DEFAULT_BASE | (1 << 11);
-	wrmsr(0x1b, msr);
-}
-
-static void stop_this_cpu(void)
-{
-	unsigned apicid;
-	apicid = apic_read(APIC_ID) >> 24;
-
-	/* Send an APIC INIT to myself */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-	apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT);
-	/* Wait for the ipi send to finish */
-	apic_wait_icr_idle();
-
-	/* Deassert the APIC INIT */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-	apic_write(APIC_ICR,  APIC_INT_LEVELTRIG | APIC_DM_INIT);
-	/* Wait for the ipi send to finish */
-	apic_wait_icr_idle();
-
-	/* If I haven't halted spin forever */
-	for(;;) {
-		hlt();
-	}
-}
 #define FIRST_CPU  1
 #define SECOND_CPU 1
 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
@@ -165,21 +151,26 @@ static void main(void)
 		},
 #endif
 	};
-	if (cpu_init_detected()) {
-		asm("jmp __cpu_reset");
-	}
-	enable_lapic();
-	init_timer();
-	if (!boot_cpu() ) {
-		notify_bsp_ap_is_stopped();
-		stop_this_cpu();
-	}
-	uart_init();
-	console_init();
-	setup_s2881_resource_map();
-	setup_coherent_ht_domain();
-	enumerate_ht_chain(0);
-	distinguish_cpu_resets(0);
+        int needs_reset;
+        enable_lapic();
+        init_timer();
+        if (cpu_init_detected()) {
+                asm("jmp __cpu_reset");
+        }
+        distinguish_cpu_resets();
+        if (!boot_cpu()) {
+                stop_this_cpu();
+        }
+        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+        uart_init();
+        console_init();
+        setup_s2881_resource_map();
+        needs_reset = setup_coherent_ht_domain();
+        needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
+        if (needs_reset) {
+                print_info("ht reset -");
+                soft_reset();
+        }
 	
 #if 0
 	print_pci_devices();
diff --git a/src/mainboard/tyan/s2881/cmos.layout b/src/mainboard/tyan/s2881/cmos.layout
index 5ba4c032c1..247715e6ac 100644
--- a/src/mainboard/tyan/s2881/cmos.layout
+++ b/src/mainboard/tyan/s2881/cmos.layout
@@ -29,6 +29,9 @@ entries
 386          1       e       1        ECC_memory
 388          4       r       0        reboot_bits
 392          3       e       5        baud_rate
+395          1       e       1        hw_scrubber
+396          1       e       1        interleave_chip_selects
+397          2       e       8        max_mem_clock
 400          1       e       1        power_on_after_fail
 412          4       e       6        debug_level
 416          4       e       7        boot_first
@@ -36,7 +39,14 @@ entries
 424          4       e       7        boot_third
 428          4       h       0        boot_index
 432	     8       h       0        boot_countdown
-1008         16      h       0        check_sum
+440          4       e       9        slow_cpu
+444          1       e       1        nmi
+728        256       h       0        user_data
+984         16       h       0        check_sum
+# Reserve the extended AMD configuration registers
+1000        24       r       0        reserved_memory
+
+
 
 enumerations
 
@@ -66,9 +76,21 @@ enumerations
 7     9     Fallback_HDD
 7     10    Fallback_Floppy
 #7     3     ROM
+8     0     200Mhz
+8     1     166Mhz
+8     2     133Mhz
+8     3     100Mhz
+9     0     off
+9     1     87.5%
+9     2     75.0%
+9     3     62.5%
+9     4     50.0%
+9     5     37.5%
+9     6     25.0%
+9     7     12.5%
 
 checksums
 
-checksum 392 1007 1008
+checksum 392 983 984
 
 
diff --git a/src/mainboard/tyan/s2881/failover.c b/src/mainboard/tyan/s2881/failover.c
index 8eeeaef7e1..b22abfea06 100644
--- a/src/mainboard/tyan/s2881/failover.c
+++ b/src/mainboard/tyan/s2881/failover.c
@@ -3,36 +3,78 @@
 #include <device/pci_def.h>
 #include <device/pci_ids.h>
 #include <arch/io.h>
-#include "arch/romcc_io.h"
+#include <arch/romcc_io.h>
+#include <arch/smp/lapic.h>
 #include "pc80/mc146818rtc_early.c"
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 #include "cpu/p6/boot_cpu.c"
 #include "northbridge/amd/amdk8/reset_test.c"
 
+#define HAVE_REGPARM_SUPPORT 0
+#if HAVE_REGPARM_SUPPORT
+static unsigned long main(unsigned long bist)
+{
+#else
 static void main(void)
 {
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain(0);
+	unsigned long bist = 0;
+#endif
+	/* Make cerain my local apic is useable */
+	enable_lapic();
 
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a cpu reset? */
+	/* Is this a cpu only reset? */
 	if (cpu_init_detected()) {
 		if (last_boot_normal()) {
-			asm("jmp __normal_image");
+			goto normal_image;
 		} else {
-			asm("jmp __cpu_reset");
+			goto cpu_reset;
 		}
 	}
 	/* Is this a secondary cpu? */
-	else if (!boot_cpu() && last_boot_normal()) {
-		asm("jmp __normal_image");
+	if (!boot_cpu()) {
+		if (last_boot_normal()) {
+			goto normal_image;
+		} else {
+			goto fallback_image;
+		}
+	}
+	
+
+	/* Nothing special needs to be done to find bus 0 */
+	/* Allow the HT devices to be found */
+	enumerate_ht_chain();
+	
+	/* Setup the 8111 */
+	amd8111_enable_rom();
+
+	/* Is this a deliberate reset by the bios */
+	if (bios_reset_detected() && last_boot_normal()) {
+		goto normal_image;
 	}
 	/* This is the primary cpu how should I boot? */
 	else if (do_normal_boot()) {
-		asm("jmp __normal_image");
+		goto normal_image;
+	}
+	else {
+		goto fallback_image;
 	}
+ normal_image:
+	asm("jmp __normal_image" 
+		: /* outputs */ 
+		: "a" (bist) /* inputs */
+		: /* clobbers */
+		);
+ cpu_reset:
+	asm("jmp __cpu_reset"
+		: /* outputs */ 
+		: "a"(bist) /* inputs */
+		: /* clobbers */
+		);
+ fallback_image:
+#if HAVE_REGPARM_SUPPORT
+	return bist;
+#else
+	return;
+#endif
 }
diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb
index 7f06909c66..45406d4ea4 100644
--- a/src/mainboard/tyan/s2882/Config.lb
+++ b/src/mainboard/tyan/s2882/Config.lb
@@ -1,6 +1,9 @@
 uses HAVE_MP_TABLE
 uses HAVE_PIRQ_TABLE
 uses USE_FALLBACK_IMAGE
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
 uses MAINBOARD
 uses ARCH
 #
@@ -19,10 +22,18 @@ register "fixup_scsi" = "1"
 register "fixup_vga" = "1"
 
 
+##
+## Move the default LinuxBIOS cmos range off of AMD RTC registers
+##
+default LB_CKS_RANGE_START=49
+default LB_CKS_RANGE_END=122
+default LB_CKS_LOC=123
+
 driver mainboard.o
-driver adaptec_scsi.o
-driver si_sata.o
+#driver adaptec_scsi.o
+#driver si_sata.o
 driver intel_nic.o
+#driver broadcom_nic.o
 object reset.o
 if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
@@ -35,6 +46,7 @@ arch i386 end
 ###
 mainboardinit cpu/i386/entry16.inc
 mainboardinit cpu/i386/entry32.inc
+mainboardinit cpu/i386/bist32.inc
 ldscript /cpu/i386/entry16.lds
 ldscript /cpu/i386/entry32.lds
 #
@@ -86,9 +98,9 @@ end
 ###
 ### Setup the serial port
 ###
-#mainboardinit superiowinbond/w83627hf/setup_serial.inc
 mainboardinit pc80/serial.inc
 mainboardinit arch/i386/lib/console.inc
+mainboardinit cpu/i386/bist32_fail.inc
 #
 ####
 #### O.k. We aren't just an intermediary anymore!
@@ -119,8 +131,8 @@ makerule ./failover.inc
 	action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end
 
 makerule ./auto.E 
-	depends	"$(MAINBOARD)/auto.c" 
-	action	"$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
+        depends "$(MAINBOARD)/auto.c option_table.h"
+        action  "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
 end
 makerule ./auto.inc 
 	depends "./romcc ./auto.E"
@@ -159,6 +171,31 @@ northbridge amd/amdk8 "mc0"
                 pci 1:0.1 on
                 pci 1:0.2 on
                 pci 1:1.0 off
+                superio winbond/w83627hf link 1
+                        pnp 2e.0 off #  Floppy
+                                 io 0x60 = 0x3f0
+                                irq 0x70 = 6
+                                drq 0x74 = 2
+                        pnp 2e.1 off #  Parallel Port
+                                 io 0x60 = 0x378
+                                irq 0x70 = 7
+                        pnp 2e.2 on #  Com1
+                                 io 0x60 = 0x3f8
+                                irq 0x70 = 4
+                        pnp 2e.3 off #  Com2
+                                 io 0x60 = 0x2f8
+                                irq 0x70 = 3
+                        pnp 2e.5 on #  Keyboard
+                                 io 0x60 = 0x60
+                                 io 0x62 = 0x64
+                                irq 0x70 = 1
+                        pnp 2e.6 off #  CIR
+                        pnp 2e.7 off #  GAME_MIDI_GIPO1
+                        pnp 2e.8 off #  GPIO2
+                        pnp 2e.9 off #  GPIO3
+                        pnp 2e.a off #  ACPI
+                        pnp 2e.b off #  HW Monitor
+                end
         end
 end
 
@@ -171,21 +208,8 @@ northbridge amd/amdk8 "mc1"
         pci 0:19.3
 end
  
-#northbridge amd/amdk8
-#end
-#southbridge amd/amd8111 "amd8111"
-#end
-#southbridge amd/amd8131 "amd8131"
-#end
-#mainboardinit archi386/smp/secondary.inc
-#superio NSC/pc87360
-#	register "com1" = "{1}"
-#	register "lpt" = "{1}"
-#end
 dir /pc80
-##dir /src/superio/winbond/w83627hf
 #dir /bioscall
-#dir /cpu/k8
 cpu k8 "cpu0"
   register "up" = "{.chip = &amd8131, .ht_width=16, .ht_speed=600}"
 end
diff --git a/src/mainboard/tyan/s2882/auto.c b/src/mainboard/tyan/s2882/auto.c
index fe731c96ac..8989c3f79f 100644
--- a/src/mainboard/tyan/s2882/auto.c
+++ b/src/mainboard/tyan/s2882/auto.c
@@ -1,21 +1,43 @@
 #define ASSEMBLY 1
 #include <stdint.h>
 #include <device/pci_def.h>
-#include <cpu/p6/apic.h>
 #include <arch/io.h>
+#include <device/pnp_def.h>
 #include <arch/romcc_io.h>
+#include <arch/smp/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
 #include "pc80/serial.c"
 #include "arch/i386/lib/console.c"
 #include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/early_ht.c"
+#include "northbridge/amd/amdk8/incoherent_ht.c"
 #include "southbridge/amd/amd8111/amd8111_early_smbus.c"
 #include "northbridge/amd/amdk8/raminit.h"
 #include "cpu/k8/apic_timer.c"
 #include "lib/delay.c"
 #include "cpu/p6/boot_cpu.c"
 #include "northbridge/amd/amdk8/reset_test.c"
-#include "debug.c"
+#include "debug.c" 
 #include "northbridge/amd/amdk8/cpu_rev.c"
+#include "superio/winbond/w83627hf/w83627hf_early_serial.c" 
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+
+static void hard_reset(void)
+{
+        set_bios_reset();
+        
+        /* enable cf9 */
+        pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
+        /* reset */
+        outb(0x0e, 0x0cf9);
+}
+
+static void soft_reset(void)
+{
+        set_bios_reset();
+        pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
+}
  
 #define REV_B_RESET 0
 static void memreset_setup(void)
@@ -95,45 +117,10 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 /* include mainboard specific ht code */
 #include "hypertransport.c"
 
-//#include "northbridge/amd/amdk8/cpu_ldtstop.c"
-//#include "southbridge/amd/amd8111/amd8111_ldtstop.c"
-
 #include "northbridge/amd/amdk8/raminit.c"
 #include "northbridge/amd/amdk8/coherent_ht.c"
 #include "sdram/generic_sdram.c"
 
-static void enable_lapic(void)
-{
-	msr_t msr;
-	msr = rdmsr(0x1b);
-	msr.hi &= 0xffffff00;
-	msr.lo &= 0x000007ff;
-	msr.lo |= APIC_DEFAULT_BASE | (1 << 11);
-	wrmsr(0x1b, msr);
-}
-
-static void stop_this_cpu(void)
-{
-	unsigned apicid;
-	apicid = apic_read(APIC_ID) >> 24;
-
-	/* Send an APIC INIT to myself */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-	apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT);
-	/* Wait for the ipi send to finish */
-	apic_wait_icr_idle();
-
-	/* Deassert the APIC INIT */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-	apic_write(APIC_ICR,  APIC_INT_LEVELTRIG | APIC_DM_INIT);
-	/* Wait for the ipi send to finish */
-	apic_wait_icr_idle();
-
-	/* If I haven't halted spin forever */
-	for(;;) {
-		hlt();
-	}
-}
 #define FIRST_CPU  1
 #define SECOND_CPU 1
 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
@@ -167,29 +154,36 @@ static void main(void)
 		},
 #endif
 	};
-	if (cpu_init_detected()) {
-		asm("jmp __cpu_reset");
-	}
-	enable_lapic();
-	init_timer();
-	if (!boot_cpu() ) {
-		notify_bsp_ap_is_stopped();
-		stop_this_cpu();
-	}
-	uart_init();
-	console_init();
-	setup_default_resource_map();
-	setup_coherent_ht_domain();
-	enumerate_ht_chain(0);
-	distinguish_cpu_resets(0);
-	
+        
+	int needs_reset;
+        enable_lapic();
+        init_timer();
+        if (cpu_init_detected()) {
+                asm("jmp __cpu_reset");
+        }
+        distinguish_cpu_resets();
+        if (!boot_cpu()) {
+                stop_this_cpu();
+        }
+        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+        uart_init();
+        console_init();
+        setup_default_resource_map();
+        needs_reset = setup_coherent_ht_domain();
+        needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
+        if (needs_reset) {
+                print_info("ht reset -");
+                soft_reset();
+        }	
 #if 0
 	print_pci_devices();
 #endif
 	enable_smbus();
 #if 0
-	dump_spd_registers(&cpu[0]);
+//	dump_spd_registers(&cpu[0]);
+	dump_smbus_registers();
 #endif
+
 	memreset_setup();
 	sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
 
diff --git a/src/mainboard/tyan/s2882/cmos.layout b/src/mainboard/tyan/s2882/cmos.layout
index 5ba4c032c1..247715e6ac 100644
--- a/src/mainboard/tyan/s2882/cmos.layout
+++ b/src/mainboard/tyan/s2882/cmos.layout
@@ -29,6 +29,9 @@ entries
 386          1       e       1        ECC_memory
 388          4       r       0        reboot_bits
 392          3       e       5        baud_rate
+395          1       e       1        hw_scrubber
+396          1       e       1        interleave_chip_selects
+397          2       e       8        max_mem_clock
 400          1       e       1        power_on_after_fail
 412          4       e       6        debug_level
 416          4       e       7        boot_first
@@ -36,7 +39,14 @@ entries
 424          4       e       7        boot_third
 428          4       h       0        boot_index
 432	     8       h       0        boot_countdown
-1008         16      h       0        check_sum
+440          4       e       9        slow_cpu
+444          1       e       1        nmi
+728        256       h       0        user_data
+984         16       h       0        check_sum
+# Reserve the extended AMD configuration registers
+1000        24       r       0        reserved_memory
+
+
 
 enumerations
 
@@ -66,9 +76,21 @@ enumerations
 7     9     Fallback_HDD
 7     10    Fallback_Floppy
 #7     3     ROM
+8     0     200Mhz
+8     1     166Mhz
+8     2     133Mhz
+8     3     100Mhz
+9     0     off
+9     1     87.5%
+9     2     75.0%
+9     3     62.5%
+9     4     50.0%
+9     5     37.5%
+9     6     25.0%
+9     7     12.5%
 
 checksums
 
-checksum 392 1007 1008
+checksum 392 983 984
 
 
diff --git a/src/mainboard/tyan/s2882/failover.c b/src/mainboard/tyan/s2882/failover.c
index 8b8bcb8b12..b22abfea06 100644
--- a/src/mainboard/tyan/s2882/failover.c
+++ b/src/mainboard/tyan/s2882/failover.c
@@ -3,44 +3,78 @@
 #include <device/pci_def.h>
 #include <device/pci_ids.h>
 #include <arch/io.h>
-#include "arch/romcc_io.h"
+#include <arch/romcc_io.h>
+#include <arch/smp/lapic.h>
 #include "pc80/mc146818rtc_early.c"
-#if 0
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#endif
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 #include "cpu/p6/boot_cpu.c"
 #include "northbridge/amd/amdk8/reset_test.c"
 
+#define HAVE_REGPARM_SUPPORT 0
+#if HAVE_REGPARM_SUPPORT
+static unsigned long main(unsigned long bist)
+{
+#else
 static void main(void)
 {
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-#if 0
-        uart_init();
-        console_init();
+	unsigned long bist = 0;
 #endif
-        enumerate_ht_chain(0);
-
-	/* Setup the 8111 */
-	amd8111_enable_rom();
+	/* Make cerain my local apic is useable */
+	enable_lapic();
 
-	/* Is this a cpu reset? */
+	/* Is this a cpu only reset? */
 	if (cpu_init_detected()) {
 		if (last_boot_normal()) {
-			asm("jmp __normal_image");
+			goto normal_image;
 		} else {
-			asm("jmp __cpu_reset");
+			goto cpu_reset;
 		}
 	}
 	/* Is this a secondary cpu? */
-	else if (!boot_cpu() && last_boot_normal()) {
-		asm("jmp __normal_image");
+	if (!boot_cpu()) {
+		if (last_boot_normal()) {
+			goto normal_image;
+		} else {
+			goto fallback_image;
+		}
+	}
+	
+
+	/* Nothing special needs to be done to find bus 0 */
+	/* Allow the HT devices to be found */
+	enumerate_ht_chain();
+	
+	/* Setup the 8111 */
+	amd8111_enable_rom();
+
+	/* Is this a deliberate reset by the bios */
+	if (bios_reset_detected() && last_boot_normal()) {
+		goto normal_image;
 	}
 	/* This is the primary cpu how should I boot? */
 	else if (do_normal_boot()) {
-		asm("jmp __normal_image");
+		goto normal_image;
 	}
+	else {
+		goto fallback_image;
+	}
+ normal_image:
+	asm("jmp __normal_image" 
+		: /* outputs */ 
+		: "a" (bist) /* inputs */
+		: /* clobbers */
+		);
+ cpu_reset:
+	asm("jmp __cpu_reset"
+		: /* outputs */ 
+		: "a"(bist) /* inputs */
+		: /* clobbers */
+		);
+ fallback_image:
+#if HAVE_REGPARM_SUPPORT
+	return bist;
+#else
+	return;
+#endif
 }
diff --git a/src/mainboard/tyan/s2882/irq_tables.c b/src/mainboard/tyan/s2882/irq_tables.c
index 7085a19ffb..27b7fc5bb4 100644
--- a/src/mainboard/tyan/s2882/irq_tables.c
+++ b/src/mainboard/tyan/s2882/irq_tables.c
@@ -22,18 +22,18 @@ const struct irq_routing_table intel_irq_routing_table = {
 	{
 		{1,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0},
 		{0x4,0, {{0, 0}, {0, 0}, {0, 0}, {0x4, 0xdef8}}, 0, 0},
-		{0x4,0x30, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0},
-		{0x3,0x18, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0},
-		{0x3,0x8, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x2, 0},
-		{0x2,0x18, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0},
-		{0x2,0x10, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0},
-		{0x4,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0},
-		{0x4,0x28, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0},
-		{0x4,0x40, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0},
-		{0x2,0x30, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0},
-		{0x3,0x20, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x6, 0},
-		{0x3,0x28, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x7, 0},
-		{0x2,0x28, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0},
-		{0x2,0x48, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0},
+		{0x4,(6<<3)|0, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0},
+		{0x3,(3<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0},
+		{0x3,(1<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x2, 0},
+		{0x2,(3<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0},
+		{0x2,(2<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0},
+		{0x4,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0},
+		{0x4,(5<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0},
+		{0x4,(8<<3)|0, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0},
+		{0x2,(6<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0},
+		{0x2,(5<<3)|0, {{0x3, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}}, 0, 0},
+		{0x2,(9<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, 
+		{0x3,(4<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x6, 0}, 
+		{0x3,(5<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x7, 0},
 	}
 };
diff --git a/src/mainboard/tyan/s2882/mainboard.c b/src/mainboard/tyan/s2882/mainboard.c
index 299401a5d7..5f06f0fcc5 100644
--- a/src/mainboard/tyan/s2882/mainboard.c
+++ b/src/mainboard/tyan/s2882/mainboard.c
@@ -38,7 +38,7 @@ static void fixup_lsi_53c1030(struct device *pdev)
 }
 #endif
 //extern static void lsi_scsi_init(struct device *dev);
-#if 1
+#if 0
 static void print_pci_regs(struct device *dev)
 {
       uint8_t byte;
@@ -92,8 +92,8 @@ static void onboard_scsi_fixup(void)
 {
        struct device *dev;
 	unsigned char i,j,k;
-#if 0
-	for(i=0;i<=4;i++) {
+#if 0 
+	for(i=0;i<=5;i++) {
 		for(j=0;j<=0x1f;j++) {
 			for (k=0;k<=6;k++){
 				dev = dev_find_slot(i, PCI_DEVFN(j, k));
diff --git a/src/mainboard/tyan/s2882/mptable.c b/src/mainboard/tyan/s2882/mptable.c
index 74739c05a7..30b61d1642 100644
--- a/src/mainboard/tyan/s2882/mptable.c
+++ b/src/mainboard/tyan/s2882/mptable.c
@@ -11,6 +11,12 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
         static const char productid[12] = "S2882       ";
         struct mp_config_table *mc;
 
+        unsigned char bus_num;
+        unsigned char bus_isa;
+        unsigned char bus_8131_1;
+        unsigned char bus_8131_2;
+        unsigned char bus_8111_1;
+
         mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
         memset(mc, 0, sizeof(*mc));
 
@@ -29,15 +35,53 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
         mc->reserved = 0;
 
         smp_write_processors(mc, processor_map);
+        {
+                device_t dev;
+
+                /* 8111 */
+                dev = dev_find_slot(1, PCI_DEVFN(0x03,0));
+                if (dev) {
+                        bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+                        bus_isa    = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+                        bus_isa++;
+                }     
+                else {  
+                        printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n");
+
+                        bus_8111_1 = 4;
+                        bus_isa = 5;
+                }
+                /* 8131-1 */
+                dev = dev_find_slot(1, PCI_DEVFN(0x01,0));
+                if (dev) {
+                        bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+                }
+                else {
+                        printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n");
+
+                        bus_8131_1 = 2;
+                }
+                /* 8131-2 */
+                dev = dev_find_slot(1, PCI_DEVFN(0x02,0));
+                if (dev) {
+                        bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+                }
+                else {
+                        printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n");
+
+                        bus_8131_2 = 3;
+                }
+        }
+/*Bus:          Bus ID  Type*/
+        /* define bus and isa numbers */
+        for(bus_num = 0; bus_num < bus_isa; bus_num++) {
+                smp_write_bus(mc, bus_num, "PCI   ");
+        }
+        smp_write_bus(mc, bus_isa, "ISA   ");
 
 
-/*Bus:		Bus ID	Type*/
-	smp_write_bus(mc, 0, "PCI   ");
-	smp_write_bus(mc, 1, "PCI   ");
-	smp_write_bus(mc, 2, "PCI   ");
-	smp_write_bus(mc, 3, "PCI   ");
-	smp_write_bus(mc, 4, "PCI   ");
-	smp_write_bus(mc, 5, "ISA   ");
 /*I/O APICs:	APIC ID	Version	State		Address*/
 	smp_write_ioapic(mc, 2, 0x11, 0xfec00000);
         {
@@ -57,72 +101,77 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
                 }
 	}
   
-/*I/O Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
-*/	smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0x0, 0x2, 0x0);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0x1, 0x2, 0x1);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0x0, 0x2, 0x2);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0x3, 0x2, 0x3);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0x4, 0x2, 0x4);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0x6, 0x2, 0x6);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0x7, 0x2, 0x7);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0x8, 0x2, 0x8);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0xc, 0x2, 0xc);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0xd, 0x2, 0xd);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0xe, 0x2, 0xe);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0xf, 0x2, 0xf);
+/*I/O Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN# */
+        smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x2, 0x0);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, 0x2, 0x1);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, 0x2, 0x2);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, 0x2, 0x3);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, 0x2, 0x4);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, 0x2, 0x6);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, 0x2, 0x7);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, 0x2, 0x8);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, 0x2, 0xc);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, 0x2, 0xd);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, 0x2, 0xe);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, 0x2, 0xf);
+
 
 	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, (4<<2)|3, 0x2, 0x13);
 	
-
 //On Board AMD USB
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x3, 0x2, 0x13);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, 0x2, 0x13);
 
 //On Board ATI Display Adapter
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x18, 0x2, 0x12);
-#if 0
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (6<<2)|0, 0x2, 0x12);
+
+#if 1
 //Slot 5 PCI 32
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x10, 0x2, 0x10);
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x11, 0x2, 0x11);
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x12, 0x2, 0x12); //
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x13, 0x2, 0x13); //
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|0, 0x2, 0x10);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|1, 0x2, 0x11);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|2, 0x2, 0x12); //
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|3, 0x2, 0x13); //
 #endif
 //Onboard SI Serial ATA
-//	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x14, 0x2, 0x11);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (5<<2)|0, 0x2, 0x13);
+//Onboard Intel 82551 10/100M NIC
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (8<<2)|0, 0x2, 0x12);
+
 #if 1
 //Slot 3 PCIX 100/66
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x20, 0x3, 0x3);
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x21, 0x3, 0x0);
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x22, 0x3, 0x1);//
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x23, 0x3, 0x2);//
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|0, 0x3, 0x3);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|1, 0x3, 0x0);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, 0x3, 0x1);//
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, 0x3, 0x2);//
 
 //Slot 4 PCIX 100/66        
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x1c, 0x3, 0x2);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x1d, 0x3, 0x3);//
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x1e, 0x3, 0x0);//
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x1f, 0x3, 0x1);//
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, 0x3, 0x2);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, 0x3, 0x3);//
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, 0x3, 0x0);//
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|3, 0x3, 0x1);//
 #endif
 //Onboard adaptec scsi
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x18, 0x3, 0x0);
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x19, 0x3, 0x1);
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (6<<2)|0, 0x3, 0x0);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (6<<2)|1, 0x3, 0x1);
 //On Board NIC
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x24, 0x3, 0x0);
-	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, 0x25, 0x3, 0x1);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, 0x3, 0x0);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|1, 0x3, 0x1);
 #if 1
 //Slot 1 PCI-X 133/100/66
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, 0xc, 0x4, 0x0);
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, 0xd, 0x4, 0x1);
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, 0xe, 0x4, 0x2); //
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, 0xf, 0x4, 0x3); //
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|0, 0x4, 0x0);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|1, 0x4, 0x1);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|2, 0x4, 0x2); //
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|3, 0x4, 0x3); //
 
 //Slot 2 PCI-X 133/100/66
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, 0x18, 0x4, 0x1);
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, 0x19, 0x4, 0x2);
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, 0x1a, 0x4, 0x3);//
-        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, 0x1b, 0x4, 0x0);//
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|0, 0x4, 0x1);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|1, 0x4, 0x2);
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|2, 0x4, 0x3);//
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|3, 0x4, 0x0);//
+
 #endif
 /*Local Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#*/
-	smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x0, 0x0, MP_APIC_ALL, 0x0);
-	smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x0, 0x0, MP_APIC_ALL, 0x1);
+        smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);
+        smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1);
 	/* There is no extension information... */
 
 	/* Compute the checksums */
diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb
index ba172926b2..f30d6aa0c5 100644
--- a/src/mainboard/tyan/s2885/Config.lb
+++ b/src/mainboard/tyan/s2885/Config.lb
@@ -1,6 +1,9 @@
 uses HAVE_MP_TABLE
 uses HAVE_PIRQ_TABLE
 uses USE_FALLBACK_IMAGE
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
 uses MAINBOARD
 uses ARCH
 #
@@ -18,12 +21,20 @@ config chip.h
 register "fixup_scsi" = "1"
 register "fixup_vga" = "1"
 
+
+##
+## Move the default LinuxBIOS cmos range off of AMD RTC registers
+##
+default LB_CKS_RANGE_START=49
+default LB_CKS_RANGE_END=122
+default LB_CKS_LOC=123
+
 driver mainboard.o
-driver broadcom_nic.o
-driver ti_firewire.o
-driver adaptec_scsi.o
-driver si_sata.o
-driver intel_nic.o
+#driver broadcom_nic.o
+#driver ti_firewire.o
+#driver adaptec_scsi.o
+#driver si_sata.o
+#driver intel_nic.o
 object reset.o
 if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
@@ -36,6 +47,7 @@ arch i386 end
 ###
 mainboardinit cpu/i386/entry16.inc
 mainboardinit cpu/i386/entry32.inc
+mainboardinit cpu/i386/bist32.inc
 ldscript /cpu/i386/entry16.lds
 ldscript /cpu/i386/entry32.lds
 #
@@ -87,22 +99,13 @@ end
 ###
 ### Setup the serial port
 ###
-#mainboardinit superiowinbond/w83627hf/setup_serial.inc
 mainboardinit pc80/serial.inc
 mainboardinit arch/i386/lib/console.inc
+mainboardinit cpu/i386/bist32_fail.inc
 #
 ####
 #### O.k. We aren't just an intermediary anymore!
 ####
-#
-###
-### When debugging disable the watchdog timer
-###
-##option MAXIMUM_CONSOLE_LOGLEVEL=7
-#default MAXIMUM_CONSOLE_LOGLEVEL=7
-#
-#if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc  end
-#
 ###
 ### Romcc output
 ###
@@ -120,8 +123,8 @@ makerule ./failover.inc
 	action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end
 
 makerule ./auto.E 
-	depends	"$(MAINBOARD)/auto.c" 
-	action	"$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
+        depends "$(MAINBOARD)/auto.c option_table.h"
+        action  "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
 end
 makerule ./auto.inc 
 	depends "./romcc ./auto.E"
@@ -160,7 +163,31 @@ northbridge amd/amdk8 "mc0"
                 pci 1:0.1 on
                 pci 1:0.2 on
                 pci 1:1.0 off
- 
+                superio winbond/w83627hf link 1
+                        pnp 2e.0 off #  Floppy
+                                 io 0x60 = 0x3f0
+                                irq 0x70 = 6
+                                drq 0x74 = 2
+                        pnp 2e.1 off #  Parallel Port
+                                 io 0x60 = 0x378
+                                irq 0x70 = 7
+                        pnp 2e.2 on #  Com1
+                                 io 0x60 = 0x3f8
+                                irq 0x70 = 4
+                        pnp 2e.3 off #  Com2
+                                 io 0x60 = 0x2f8
+                                irq 0x70 = 3
+                        pnp 2e.5 on #  Keyboard
+                                 io 0x60 = 0x60
+                                 io 0x62 = 0x64
+                                irq 0x70 = 1
+                        pnp 2e.6 off #  CIR
+                        pnp 2e.7 off #  GAME_MIDI_GIPO1
+                        pnp 2e.8 off #  GPIO2
+                        pnp 2e.9 off #  GPIO3
+                        pnp 2e.a off #  ACPI
+                        pnp 2e.b off #  HW Monitor
+                end
 	end
         southbridge amd/amd8151 "amd8151" link 0
                 pci 0:0.0
@@ -177,24 +204,9 @@ northbridge amd/amdk8 "mc1"
         pci 0:19.3
 end
   
-#northbridge amd/amdk8
-#end
-#southbridge amd/amd8111 "amd8111"
-#end
-#southbridge amd/amd8131 "amd8131"
-#end
-#southbridge amd/amd8151 "amd8151"
-#end
-
-#mainboardinit archi386/smp/secondary.inc
-#superio NSC/pc87360
-#	register "com1" = "{1}"
-#	register "lpt" = "{1}"
-#end
 dir /pc80
-##dir /src/superio/winbond/w83627hf
 #dir /bioscall
-#dir /cpu/k8
+
 cpu k8 "cpu0"
   register "up" = "{.chip = &amd8151, .ht_width=16, .ht_speed=600}"
   register "down" = "{.chip = &amd8131, .ht_width=16, .ht_speed=600}"
diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c
index 92e75c9ab0..2450435c03 100644
--- a/src/mainboard/tyan/s2885/auto.c
+++ b/src/mainboard/tyan/s2885/auto.c
@@ -2,13 +2,16 @@
  
 #include <stdint.h>
 #include <device/pci_def.h>
-#include <cpu/p6/apic.h>
 #include <arch/io.h>
+#include <device/pnp_def.h>
 #include <arch/romcc_io.h>
+#include <arch/smp/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
 #include "pc80/serial.c"
 #include "arch/i386/lib/console.c"
 #include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/early_ht.c"
+#include "northbridge/amd/amdk8/incoherent_ht.c"
 #include "southbridge/amd/amd8111/amd8111_early_smbus.c"
 #include "northbridge/amd/amdk8/raminit.h"
 #include "cpu/k8/apic_timer.c"
@@ -17,7 +20,25 @@
 #include "northbridge/amd/amdk8/reset_test.c"
 #include "debug.c"
 #include "northbridge/amd/amdk8/cpu_rev.c"
+#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
 
+#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+
+static void hard_reset(void)
+{
+        set_bios_reset();
+
+        /* enable cf9 */
+        pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
+        /* reset */
+        outb(0x0e, 0x0cf9);
+}
+
+static void soft_reset(void)
+{
+        set_bios_reset();
+        pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
+}
 
 #define REV_B_RESET 0
 static void memreset_setup(void)
@@ -102,38 +123,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 
 #include "resourcemap.c" /* tyan does not want the default */
 
-static void enable_lapic(void)
-{
-	msr_t msr;
-	msr = rdmsr(0x1b);
-	msr.hi &= 0xffffff00;
-	msr.lo &= 0x000007ff;
-	msr.lo |= APIC_DEFAULT_BASE | (1 << 11);
-	wrmsr(0x1b, msr);
-}
-
-static void stop_this_cpu(void)
-{
-	unsigned apicid;
-	apicid = apic_read(APIC_ID) >> 24;
-
-	/* Send an APIC INIT to myself */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-	apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT);
-	/* Wait for the ipi send to finish */
-	apic_wait_icr_idle();
-
-	/* Deassert the APIC INIT */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-	apic_write(APIC_ICR,  APIC_INT_LEVELTRIG | APIC_DM_INIT);
-	/* Wait for the ipi send to finish */
-	apic_wait_icr_idle();
-
-	/* If I haven't halted spin forever */
-	for(;;) {
-		hlt();
-	}
-}
 #define FIRST_CPU  1
 #define SECOND_CPU 1
 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
@@ -163,22 +152,27 @@ static void main(void)
 		},
 #endif
 	};
-	if (cpu_init_detected()) {
-		asm("jmp __cpu_reset");
-	}
-	enable_lapic();
-	init_timer();
-	if (!boot_cpu() ) {
-//		notify_bsp_ap_is_stopped();
-		stop_this_cpu();
-	}
-	uart_init();
-	console_init();
-	setup_s2885_resource_map();
-	setup_coherent_ht_domain();
-        enumerate_ht_chain(0);
-	distinguish_cpu_resets(0);
-	
+        int needs_reset;
+        enable_lapic();
+        init_timer();
+        if (cpu_init_detected()) {
+                asm("jmp __cpu_reset");
+        }
+        distinguish_cpu_resets();
+        if (!boot_cpu()) {
+                stop_this_cpu();
+        }
+        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+        uart_init();
+        console_init();
+        setup_s2885_resource_map();
+        needs_reset = setup_coherent_ht_domain();
+        needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
+        if (needs_reset) {
+                print_info("ht reset -");
+                soft_reset();
+        }
+
 #if 0
 	print_pci_devices();
 #endif
diff --git a/src/mainboard/tyan/s2885/cmos.layout b/src/mainboard/tyan/s2885/cmos.layout
index 5ba4c032c1..247715e6ac 100644
--- a/src/mainboard/tyan/s2885/cmos.layout
+++ b/src/mainboard/tyan/s2885/cmos.layout
@@ -29,6 +29,9 @@ entries
 386          1       e       1        ECC_memory
 388          4       r       0        reboot_bits
 392          3       e       5        baud_rate
+395          1       e       1        hw_scrubber
+396          1       e       1        interleave_chip_selects
+397          2       e       8        max_mem_clock
 400          1       e       1        power_on_after_fail
 412          4       e       6        debug_level
 416          4       e       7        boot_first
@@ -36,7 +39,14 @@ entries
 424          4       e       7        boot_third
 428          4       h       0        boot_index
 432	     8       h       0        boot_countdown
-1008         16      h       0        check_sum
+440          4       e       9        slow_cpu
+444          1       e       1        nmi
+728        256       h       0        user_data
+984         16       h       0        check_sum
+# Reserve the extended AMD configuration registers
+1000        24       r       0        reserved_memory
+
+
 
 enumerations
 
@@ -66,9 +76,21 @@ enumerations
 7     9     Fallback_HDD
 7     10    Fallback_Floppy
 #7     3     ROM
+8     0     200Mhz
+8     1     166Mhz
+8     2     133Mhz
+8     3     100Mhz
+9     0     off
+9     1     87.5%
+9     2     75.0%
+9     3     62.5%
+9     4     50.0%
+9     5     37.5%
+9     6     25.0%
+9     7     12.5%
 
 checksums
 
-checksum 392 1007 1008
+checksum 392 983 984
 
 
diff --git a/src/mainboard/tyan/s2885/failover.c b/src/mainboard/tyan/s2885/failover.c
index 8b8bcb8b12..b22abfea06 100644
--- a/src/mainboard/tyan/s2885/failover.c
+++ b/src/mainboard/tyan/s2885/failover.c
@@ -3,44 +3,78 @@
 #include <device/pci_def.h>
 #include <device/pci_ids.h>
 #include <arch/io.h>
-#include "arch/romcc_io.h"
+#include <arch/romcc_io.h>
+#include <arch/smp/lapic.h>
 #include "pc80/mc146818rtc_early.c"
-#if 0
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#endif
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 #include "cpu/p6/boot_cpu.c"
 #include "northbridge/amd/amdk8/reset_test.c"
 
+#define HAVE_REGPARM_SUPPORT 0
+#if HAVE_REGPARM_SUPPORT
+static unsigned long main(unsigned long bist)
+{
+#else
 static void main(void)
 {
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-#if 0
-        uart_init();
-        console_init();
+	unsigned long bist = 0;
 #endif
-        enumerate_ht_chain(0);
-
-	/* Setup the 8111 */
-	amd8111_enable_rom();
+	/* Make cerain my local apic is useable */
+	enable_lapic();
 
-	/* Is this a cpu reset? */
+	/* Is this a cpu only reset? */
 	if (cpu_init_detected()) {
 		if (last_boot_normal()) {
-			asm("jmp __normal_image");
+			goto normal_image;
 		} else {
-			asm("jmp __cpu_reset");
+			goto cpu_reset;
 		}
 	}
 	/* Is this a secondary cpu? */
-	else if (!boot_cpu() && last_boot_normal()) {
-		asm("jmp __normal_image");
+	if (!boot_cpu()) {
+		if (last_boot_normal()) {
+			goto normal_image;
+		} else {
+			goto fallback_image;
+		}
+	}
+	
+
+	/* Nothing special needs to be done to find bus 0 */
+	/* Allow the HT devices to be found */
+	enumerate_ht_chain();
+	
+	/* Setup the 8111 */
+	amd8111_enable_rom();
+
+	/* Is this a deliberate reset by the bios */
+	if (bios_reset_detected() && last_boot_normal()) {
+		goto normal_image;
 	}
 	/* This is the primary cpu how should I boot? */
 	else if (do_normal_boot()) {
-		asm("jmp __normal_image");
+		goto normal_image;
 	}
+	else {
+		goto fallback_image;
+	}
+ normal_image:
+	asm("jmp __normal_image" 
+		: /* outputs */ 
+		: "a" (bist) /* inputs */
+		: /* clobbers */
+		);
+ cpu_reset:
+	asm("jmp __cpu_reset"
+		: /* outputs */ 
+		: "a"(bist) /* inputs */
+		: /* clobbers */
+		);
+ fallback_image:
+#if HAVE_REGPARM_SUPPORT
+	return bist;
+#else
+	return;
+#endif
 }
diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb
index ccc4784935..58e71b4668 100644
--- a/src/mainboard/tyan/s4880/Config.lb
+++ b/src/mainboard/tyan/s4880/Config.lb
@@ -1,6 +1,9 @@
 uses HAVE_MP_TABLE
 uses HAVE_PIRQ_TABLE
 uses USE_FALLBACK_IMAGE
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
 uses MAINBOARD
 uses ARCH
 #
@@ -19,10 +22,17 @@ register "fixup_scsi" = "1"
 #register "fixup_vga" = "1"
 
 
+##
+## Move the default LinuxBIOS cmos range off of AMD RTC registers
+##
+default LB_CKS_RANGE_START=49
+default LB_CKS_RANGE_END=122
+default LB_CKS_LOC=123
+
 driver mainboard.o
-driver lsi_scsi.o
+#driver lsi_scsi.o
 #driver adaptec_scsi.o
-driver si_sata.o
+#driver si_sata.o
 #driver intel_nic.o
 object reset.o
 if HAVE_MP_TABLE object mptable.o end
@@ -36,6 +46,7 @@ arch i386 end
 ###
 mainboardinit cpu/i386/entry16.inc
 mainboardinit cpu/i386/entry32.inc
+mainboardinit cpu/i386/bist32.inc
 ldscript /cpu/i386/entry16.lds
 ldscript /cpu/i386/entry32.lds
 #
@@ -87,23 +98,15 @@ end
 ###
 ### Setup the serial port
 ###
-#mainboardinit superiowinbond/w83627hf/setup_serial.inc
 mainboardinit pc80/serial.inc
 mainboardinit arch/i386/lib/console.inc
+mainboardinit cpu/i386/bist32_fail.inc
 #
 ####
 #### O.k. We aren't just an intermediary anymore!
 ####
 #
 ###
-### When debugging disable the watchdog timer
-###
-##option MAXIMUM_CONSOLE_LOGLEVEL=7
-#default MAXIMUM_CONSOLE_LOGLEVEL=7
-#
-#if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc  end
-#
-###
 ### Romcc output
 ###
 #makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E"
@@ -120,8 +123,8 @@ makerule ./failover.inc
 	action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end
 
 makerule ./auto.E 
-	depends	"$(MAINBOARD)/auto.c" 
-	action	"$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
+        depends "$(MAINBOARD)/auto.c option_table.h"
+        action  "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
 end
 makerule ./auto.inc 
 	depends "./romcc ./auto.E"
@@ -160,6 +163,31 @@ northbridge amd/amdk8 "mc0"
                 pci 1:0.1 on
                 pci 1:0.2 on
                 pci 1:1.0 off
+                superio winbond/w83627hf link 1
+                        pnp 2e.0 off #  Floppy
+                                 io 0x60 = 0x3f0
+                                irq 0x70 = 6
+                                drq 0x74 = 2
+                        pnp 2e.1 off #  Parallel Port
+                                 io 0x60 = 0x378
+                                irq 0x70 = 7
+                        pnp 2e.2 on #  Com1
+                                 io 0x60 = 0x3f8
+                                irq 0x70 = 4
+                        pnp 2e.3 off #  Com2
+                                 io 0x60 = 0x2f8
+                                irq 0x70 = 3
+                        pnp 2e.5 on #  Keyboard
+                                 io 0x60 = 0x60
+                                 io 0x62 = 0x64
+                                irq 0x70 = 1
+                        pnp 2e.6 off #  CIR
+                        pnp 2e.7 off #  GAME_MIDI_GIPO1
+                        pnp 2e.8 off #  GPIO2
+                        pnp 2e.9 off #  GPIO3
+                        pnp 2e.a off #  ACPI
+                        pnp 2e.b off #  HW Monitor
+                end
         end
 end
 
@@ -192,21 +220,9 @@ northbridge amd/amdk8 "mc3"
 end
 
 
-#northbridge amd/amdk8
-#end
-#southbridge amd/amd8111 "amd8111"
-#end
-#southbridge amd/amd8131 "amd8131"
-#end
-#mainboardinit archi386/smp/secondary.inc
-#superio NSC/pc87360
-#	register "com1" = "{1}"
-#	register "lpt" = "{1}"
-#end
 dir /pc80
-##dir /src/superio/winbond/w83627hf
 #dir /bioscall
-#dir /cpu/k8
+
 cpu k8 "cpu0"
   register "up" = "{.chip = &amd8131, .ht_width=16, .ht_speed=600}"
 end
diff --git a/src/mainboard/tyan/s4880/auto.c b/src/mainboard/tyan/s4880/auto.c
index f4d898599d..11e6a8b669 100644
--- a/src/mainboard/tyan/s4880/auto.c
+++ b/src/mainboard/tyan/s4880/auto.c
@@ -1,13 +1,16 @@
 #define ASSEMBLY 1
 #include <stdint.h>
 #include <device/pci_def.h>
-#include <cpu/p6/apic.h>
 #include <arch/io.h>
+#include <device/pnp_def.h>
 #include <arch/romcc_io.h>
+#include <arch/smp/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
 #include "pc80/serial.c"
 #include "arch/i386/lib/console.c"
 #include "ram/ramtest.c"
-#include "northbridge/amd/amdk8/early_ht.c"
+#include "northbridge/amd/amdk8/incoherent_ht.c"
 #include "southbridge/amd/amd8111/amd8111_early_smbus.c"
 #include "northbridge/amd/amdk8/raminit.h"
 #include "cpu/k8/apic_timer.c"
@@ -16,6 +19,25 @@
 #include "northbridge/amd/amdk8/reset_test.c"
 #include "debug.c"
 #include "northbridge/amd/amdk8/cpu_rev.c"
+#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
+
+static void hard_reset(void)
+{
+        set_bios_reset();
+
+        /* enable cf9 */
+        pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
+        /* reset */
+        outb(0x0e, 0x0cf9);
+}
+
+static void soft_reset(void)
+{
+        set_bios_reset();
+        pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
+}
 
 
 #define REV_B_RESET 0
@@ -102,8 +124,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 /* include mainboard specific ht code */
 #include "hypertransport.c"
 
-//#include "northbridge/amd/amdk8/cpu_ldtstop.c"
-//#include "southbridge/amd/amd8111/amd8111_ldtstop.c"
 
 #include "northbridge/amd/amdk8/raminit.c"
 #include "northbridge/amd/amdk8/coherent_ht.c"
@@ -111,38 +131,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 
 #include "resourcemap.c" /* tyan does not want the default */
 
-static void enable_lapic(void)
-{
-	msr_t msr;
-	msr = rdmsr(0x1b);
-	msr.hi &= 0xffffff00;
-	msr.lo &= 0x000007ff;
-	msr.lo |= APIC_DEFAULT_BASE | (1 << 11);
-	wrmsr(0x1b, msr);
-}
-
-static void stop_this_cpu(void)
-{
-	unsigned apicid;
-	apicid = apic_read(APIC_ID) >> 24;
-
-	/* Send an APIC INIT to myself */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-	apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT);
-	/* Wait for the ipi send to finish */
-	apic_wait_icr_idle();
-
-	/* Deassert the APIC INIT */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-	apic_write(APIC_ICR,  APIC_INT_LEVELTRIG | APIC_DM_INIT);
-	/* Wait for the ipi send to finish */
-	apic_wait_icr_idle();
-
-	/* If I haven't halted spin forever */
-	for(;;) {
-		hlt();
-	}
-}
 #define FIRST_CPU  1
 #define SECOND_CPU 1
 
@@ -214,21 +202,26 @@ static void main(void)
 #endif
 	};
 	int i;
-	if (cpu_init_detected()) {
-		asm("jmp __cpu_reset");
-	}
-	enable_lapic();
-	init_timer();
-	if (!boot_cpu() ) {
-//		notify_bsp_ap_is_stopped();
-		stop_this_cpu();
-	}
-	uart_init();
-	console_init();
-	setup_s4880_resource_map();
-	setup_coherent_ht_domain();
-	enumerate_ht_chain(0);
-	distinguish_cpu_resets(0);
+        int needs_reset;
+        enable_lapic();
+        init_timer();
+        if (cpu_init_detected()) {
+                asm("jmp __cpu_reset");
+        }
+        distinguish_cpu_resets();
+        if (!boot_cpu()) {
+                stop_this_cpu();
+        }
+        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
+        uart_init();
+        console_init();
+        setup_s4880_resource_map();
+        needs_reset = setup_coherent_ht_domain();
+        needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
+        if (needs_reset) {
+                print_info("ht reset -");
+                soft_reset();
+        }
 	
 #if 0
 	dump_pci_devices();
diff --git a/src/mainboard/tyan/s4880/cmos.layout b/src/mainboard/tyan/s4880/cmos.layout
index 5ba4c032c1..247715e6ac 100644
--- a/src/mainboard/tyan/s4880/cmos.layout
+++ b/src/mainboard/tyan/s4880/cmos.layout
@@ -29,6 +29,9 @@ entries
 386          1       e       1        ECC_memory
 388          4       r       0        reboot_bits
 392          3       e       5        baud_rate
+395          1       e       1        hw_scrubber
+396          1       e       1        interleave_chip_selects
+397          2       e       8        max_mem_clock
 400          1       e       1        power_on_after_fail
 412          4       e       6        debug_level
 416          4       e       7        boot_first
@@ -36,7 +39,14 @@ entries
 424          4       e       7        boot_third
 428          4       h       0        boot_index
 432	     8       h       0        boot_countdown
-1008         16      h       0        check_sum
+440          4       e       9        slow_cpu
+444          1       e       1        nmi
+728        256       h       0        user_data
+984         16       h       0        check_sum
+# Reserve the extended AMD configuration registers
+1000        24       r       0        reserved_memory
+
+
 
 enumerations
 
@@ -66,9 +76,21 @@ enumerations
 7     9     Fallback_HDD
 7     10    Fallback_Floppy
 #7     3     ROM
+8     0     200Mhz
+8     1     166Mhz
+8     2     133Mhz
+8     3     100Mhz
+9     0     off
+9     1     87.5%
+9     2     75.0%
+9     3     62.5%
+9     4     50.0%
+9     5     37.5%
+9     6     25.0%
+9     7     12.5%
 
 checksums
 
-checksum 392 1007 1008
+checksum 392 983 984
 
 
diff --git a/src/mainboard/tyan/s4880/failover.c b/src/mainboard/tyan/s4880/failover.c
index 8eeeaef7e1..b22abfea06 100644
--- a/src/mainboard/tyan/s4880/failover.c
+++ b/src/mainboard/tyan/s4880/failover.c
@@ -3,36 +3,78 @@
 #include <device/pci_def.h>
 #include <device/pci_ids.h>
 #include <arch/io.h>
-#include "arch/romcc_io.h"
+#include <arch/romcc_io.h>
+#include <arch/smp/lapic.h>
 #include "pc80/mc146818rtc_early.c"
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 #include "cpu/p6/boot_cpu.c"
 #include "northbridge/amd/amdk8/reset_test.c"
 
+#define HAVE_REGPARM_SUPPORT 0
+#if HAVE_REGPARM_SUPPORT
+static unsigned long main(unsigned long bist)
+{
+#else
 static void main(void)
 {
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain(0);
+	unsigned long bist = 0;
+#endif
+	/* Make cerain my local apic is useable */
+	enable_lapic();
 
-	/* Setup the 8111 */
-	amd8111_enable_rom();
-
-	/* Is this a cpu reset? */
+	/* Is this a cpu only reset? */
 	if (cpu_init_detected()) {
 		if (last_boot_normal()) {
-			asm("jmp __normal_image");
+			goto normal_image;
 		} else {
-			asm("jmp __cpu_reset");
+			goto cpu_reset;
 		}
 	}
 	/* Is this a secondary cpu? */
-	else if (!boot_cpu() && last_boot_normal()) {
-		asm("jmp __normal_image");
+	if (!boot_cpu()) {
+		if (last_boot_normal()) {
+			goto normal_image;
+		} else {
+			goto fallback_image;
+		}
+	}
+	
+
+	/* Nothing special needs to be done to find bus 0 */
+	/* Allow the HT devices to be found */
+	enumerate_ht_chain();
+	
+	/* Setup the 8111 */
+	amd8111_enable_rom();
+
+	/* Is this a deliberate reset by the bios */
+	if (bios_reset_detected() && last_boot_normal()) {
+		goto normal_image;
 	}
 	/* This is the primary cpu how should I boot? */
 	else if (do_normal_boot()) {
-		asm("jmp __normal_image");
+		goto normal_image;
+	}
+	else {
+		goto fallback_image;
 	}
+ normal_image:
+	asm("jmp __normal_image" 
+		: /* outputs */ 
+		: "a" (bist) /* inputs */
+		: /* clobbers */
+		);
+ cpu_reset:
+	asm("jmp __cpu_reset"
+		: /* outputs */ 
+		: "a"(bist) /* inputs */
+		: /* clobbers */
+		);
+ fallback_image:
+#if HAVE_REGPARM_SUPPORT
+	return bist;
+#else
+	return;
+#endif
 }
diff --git a/src/southbridge/amd/amd8131/amd8131_bridge.c b/src/southbridge/amd/amd8131/amd8131_bridge.c
index b96f46db45..44b04d8636 100644
--- a/src/southbridge/amd/amd8131/amd8131_bridge.c
+++ b/src/southbridge/amd/amd8131/amd8131_bridge.c
@@ -24,15 +24,15 @@ static void pcix_init(device_t dev)
  	
 	/* Set drive strength */
 	word = pci_read_config16(dev, 0xe0);
-        word = 0x0404;
+        word = 0x0808;
         pci_write_config16(dev, 0xe0, word);
 	word = pci_read_config16(dev, 0xe4);
-        word = 0x0404;
+        word = 0x0808;
         pci_write_config16(dev, 0xe4, word);
 	
 	/* Set impedance */
 	word = pci_read_config16(dev, 0xe8);
-        word = 0x0404;
+        word = 0x0f0f;
         pci_write_config16(dev, 0xe8, word);
 
 	/* Set discard unrequested prefetch data */
@@ -105,6 +105,12 @@ static void ioapic_enable(device_t dev)
 		value &= ~((1 << 1) | (1 << 0));
 	}
 	pci_write_config32(dev, 0x44, value);
+
+//BY LYH
+        value = pci_read_config32(dev, 0x4);
+        value |= 6;
+        pci_write_config32(dev, 0x4, value);
+//BY LYH END
 }
 
 static struct device_operations ioapic_ops = {
diff --git a/src/southbridge/amd/amd8151/amd8151_agp3.c b/src/southbridge/amd/amd8151/amd8151_agp3.c
index 2feeded66d..a4d4dce1a1 100644
--- a/src/southbridge/amd/amd8151/amd8151_agp3.c
+++ b/src/southbridge/amd/amd8151/amd8151_agp3.c
@@ -11,12 +11,16 @@
 
 static void agp3bridge_init(device_t dev)
 {
-	uint32_t dword;
+	uint8_t byte;
+	
+	byte = pci_read_config32(dev, 0x04);
+        byte |= 0x07;
+        pci_write_config8(dev, 0x04, byte);
+ 
+        byte = pci_read_config32(dev, 0xce);
+        byte |= 3<<2;
+        pci_write_config8(dev, 0xce, byte);
 	
-	dword = pci_read_config8(dev, 0x04);
-        dword |= 0x07;
-        pci_write_config8(dev, 0x04, dword);
- 	
 	return;
 }
 
@@ -31,7 +35,7 @@ static struct device_operations agp3bridge_ops  = {
 static struct pci_driver agp3bridge_driver __pci_driver = {
         .ops    = &agp3bridge_ops,
         .vendor = PCI_VENDOR_ID_AMD,
-        .device = 0x7455,
+        .device = 0x7455, // AGP Bridge
 };
 
 
@@ -41,19 +45,19 @@ static void agp3dev_enable(device_t dev)
 	
 	//  AGP enable
         value = pci_read_config32(dev, 0xa8);
-        value |= (1<<8);
+        value |= (3<<8)|2; //AGP 8x
         pci_write_config32(dev, 0xa8, value);
-
+/*
 	//  linkA 8bit-->16bit
         value = pci_read_config32(dev, 0xc4);
-        value |= (11<<24);
+        value |= (0x11<<24);
         pci_write_config32(dev, 0xc4, value);
 
         //  linkA 200-->600
         value = pci_read_config32(dev, 0xcc);
         value |= (4<<8);
         pci_write_config32(dev, 0xcc, value);
-  
+*/  
 
         value = pci_read_config32(dev, 0x4);
         value |= 6;
@@ -72,6 +76,6 @@ static struct device_operations agp3dev_ops = {
 static struct pci_driver agp3dev_driver __pci_driver = {
 	.ops    = &agp3dev_ops,
 	.vendor = PCI_VENDOR_ID_AMD,
-	.device = 0x7454,
+	.device = 0x7454, //AGP Device
 	
 };
diff --git a/src/stream/rom_stream.c b/src/stream/rom_stream.c
index 41dd0a45d5..5ac4cd9dbe 100644
--- a/src/stream/rom_stream.c
+++ b/src/stream/rom_stream.c
@@ -17,7 +17,7 @@ int stream_init(void)
 {
 	rom = rom_start;
 
-	printk_spew("%6d:%s() - rom_stream: 0x%08lx - 0x%08lx\n",
+	printk_debug("%6d:%s() - rom_stream: 0x%08lx - 0x%08lx\n",
 		__LINE__, __FUNCTION__,
 		(unsigned long)rom_start,
 		(unsigned long)rom_end);