rename Iwill to iwill to keep naming scheme consistent

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2467 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

3 files changed, 242 insertions, 0 deletions

diff --git a/targets/iwill/dk8_htx/Config.lb b/targets/iwill/dk8_htx/Config.lb
new file mode 100644
index 0000000000..ae7d8be730
--- /dev/null
+++ b/targets/iwill/dk8_htx/Config.lb
@@ -0,0 +1,74 @@
+
+target dk8_htx
+mainboard Iwill/dk8_htx
+
+# serengeti_leopard
+romimage "normal"
+#       48K for SCSI FW
+#        option ROM_SIZE = 475136
+#       48K for SCSI FW and 48K for ATI ROM
+#       option ROM_SIZE = 425984 
+#       64K for Etherboot
+#        option ROM_SIZE = 458752 
+	option USE_FAILOVER_IMAGE=0
+	option USE_FALLBACK_IMAGE=0
+#	option ROM_IMAGE_SIZE=0x13800
+#	option ROM_IMAGE_SIZE=0x17800
+#	option ROM_IMAGE_SIZE=0x15800
+	option ROM_IMAGE_SIZE=0x20000
+	option XIP_ROM_SIZE=0x20000
+	option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+#       payload ../../../payloads/tg3--ide_disk.zelf
+#        payload ../../../payloads/filo.elf
+#        payload ../../../payloads/filo_mem.elf
+#        payload ../../../payloads/filo.zelf
+#        payload ../../../payloads/tg3--filo_hda2.zelf
+#	payload ../../../payloads/tg3.zelf
+#	payload ../../../payloads/tg3_vga.zelf
+#	payload ../../../../payloads/tg3--filo_hda2_vga.zelf
+	payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf
+#       payload ../../../../payloads/e1000--filo.zelf
+#	payload ../../../payloads/tg3_com2.zelf
+#        payload ../../../payloads/tg3--e1000--filo.zelf
+#        payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
+#	payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf
+#	payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf
+end
+
+romimage "fallback" 
+	option USE_FAILOVER_IMAGE=0
+	option USE_FALLBACK_IMAGE=1
+#	option ROM_IMAGE_SIZE=0x13800
+#	option ROM_IMAGE_SIZE=0x17800
+#	option ROM_IMAGE_SIZE=0x15800
+	option ROM_IMAGE_SIZE=0x20000
+	option XIP_ROM_SIZE=0x20000
+	option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
+#       payload ../../../payloads/tg3--ide_disk.zelf
+#        payload ../../../payloads/filo.elf
+#        payload ../../../payloads/filo_mem.elf
+#        payload ../../../payloads/filo.zelf
+#        payload ../../../payloads/tg3--filo_hda2.zelf
+#	payload ../../../payloads/tg3.zelf
+#	payload ../../../payloads/tg3_vga.zelf
+#	payload ../../../../payloads/memtest
+#	payload ../../../../payloads/tg3--filo_hda2_vga.zelf
+	payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf
+#	payload ../../../payloads/tg3_com2.zelf
+#       payload ../../../../payloads/e1000--filo.zelf
+#        payload ../../../payloads/tg3--e1000--filo.zelf
+#        payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
+#	payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf
+#	payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf
+end
+
+romimage "failover"
+	option USE_FAILOVER_IMAGE=1
+        option USE_FALLBACK_IMAGE=0
+        option ROM_IMAGE_SIZE=FAILOVER_SIZE
+        option XIP_ROM_SIZE=FAILOVER_SIZE
+        option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Failover"
+end
+
+buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" "failover"
+#buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/iwill/dk8_htx/VERSION b/targets/iwill/dk8_htx/VERSION
new file mode 100644
index 0000000000..5755a12232
--- /dev/null
+++ b/targets/iwill/dk8_htx/VERSION
@@ -0,0 +1 @@
+_dk8_htx
diff --git a/targets/iwill/dk8s2/Config.lb b/targets/iwill/dk8s2/Config.lb
new file mode 100644
index 0000000000..64419756e4
--- /dev/null
+++ b/targets/iwill/dk8s2/Config.lb
@@ -0,0 +1,167 @@
+# Sample config file for 
+# the Iwill DK8S2
+# This will make a target directory of ./dk8s2
+
+target dk8s2
+
+mainboard Iwill/DK8S2
+
+option HAVE_HARD_RESET=1
+
+option HAVE_OPTION_TABLE=1
+option HAVE_MP_TABLE=1
+option ROM_SIZE=1024*1024
+
+option HAVE_FALLBACK_BOOT=1
+  
+#option CONFIG_LSI_SCSI_FW_FIXUP=1
+
+
+#
+###
+### Build code to export a programmable irq routing table
+###
+option HAVE_PIRQ_TABLE=1
+option IRQ_SLOT_COUNT=12
+#
+###
+### Build code for SMP support
+### Only worry about 2 micro processors
+###
+option CONFIG_SMP=1
+option CONFIG_MAX_CPUS=2
+#option CONFIG_LOGICAL_CPUS=2
+option CONFIG_MAX_PHYSICAL_CPUS=2
+#
+###
+### Build code to setup a generic IOAPIC
+###
+option CONFIG_IOAPIC=1
+#
+###
+### MEMORY_HOLE instructs earlymtrr.inc to
+### enable caching from 0-640KB and to disable 
+### caching from 640KB-1MB using fixed MTRRs 
+###
+### Enabling this option breaks SMP because secondary
+### CPU identification depends on only variable MTRRs
+### being enabled.
+###
+#option MEMORY_HOLE=0
+#
+###
+### Clean up the motherboard id strings
+###
+option MAINBOARD_PART_NUMBER="DK8S2"
+option MAINBOARD_VENDOR="Iwill"
+#
+###
+### Compute the location and size of where this firmware image
+### (linuxBIOS plus bootloader) will live in the boot rom chip.
+###
+#option FALLBACK_SIZE=524288
+#option FALLBACK_SIZE=98304
+option FALLBACK_SIZE=131072
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+option ROM_IMAGE_SIZE=65536
+ 
+
+###
+### Compute where this copy of linuxBIOS will start in the boot rom
+###
+#
+###
+
+## We do use compressed image
+#option CONFIG_COMPRESS=1
+
+option CONFIG_CONSOLE_SERIAL8250=1
+option TTYS0_BAUD=115200
+
+##
+### Select the linuxBIOS loglevel
+##
+## EMERG      1   system is unusable
+## ALERT      2   action must be taken immediately
+## CRIT       3   critical conditions
+## ERR        4   error conditions
+## WARNING    5   warning conditions
+## NOTICE     6   normal but significant condition
+## INFO       7   informational
+## DEBUG      8   debug-level messages
+## SPEW       9   Way too many details
+
+## Request this level of debugging output
+option DEFAULT_CONSOLE_LOGLEVEL=7
+## At a maximum only compile in this level of debugging
+option MAXIMUM_CONSOLE_LOGLEVEL=7
+
+#option DEBUG=1
+
+#
+
+## LinuxBIOS C code runs at this location in RAM
+option _RAMBASE=0x004000
+
+##
+## Use a 32K stack
+##
+option STACK_SIZE=0x8000 
+
+##
+## Use a 56K heap
+##
+option HEAP_SIZE=0xe000
+
+#
+###
+### Compute the start location and size size of
+### The linuxBIOS bootloader.
+###
+option CONFIG_ROM_STREAM     = 1
+
+#
+# 
+romimage "normal"
+#	48K for SCSI FW
+#        option ROM_SIZE = 512*1024-48*1024
+#	48K for SCSI FW and 48K for ATI ROM
+#	option ROM_SIZE = 512*1024-48*1024-48*1024
+        option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+	option USE_FALLBACK_IMAGE=0
+	option ROM_SECTION_SIZE  = (ROM_SIZE - FALLBACK_SIZE)
+	option ROM_SECTION_OFFSET= 0
+
+	option PAYLOAD_SIZE            = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
+	option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+	option _ROMBASE      = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
+
+#	option XIP_ROM_SIZE = FALLBACK_SIZE
+        option XIP_ROM_SIZE = 65536
+
+	option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
+
+	payload /usr/src/filo-0.4.1_btext/filo.elf
+#	payload /usr/src/filo-0.4.2/filo.elf
+end
+
+romimage "fallback" 
+	option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
+	option USE_FALLBACK_IMAGE=1
+	option ROM_SECTION_SIZE  = FALLBACK_SIZE
+	option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
+
+	option PAYLOAD_SIZE            = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
+	option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+	option _ROMBASE      = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
+
+#	option XIP_ROM_SIZE = FALLBACK_SIZE
+	option XIP_ROM_SIZE = 65536
+	option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
+
+	payload ../../../payloads/filo.elf
+#	payload /usr/src/filo-0.4.2/filo.elf
+end
+
+buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"