summaryrefslogtreecommitdiff
path: root/targets/tyan
diff options
context:
space:
mode:
authorYinghai Lu <yinghailu@gmail.com>2004-10-22 18:45:36 +0000
committerYinghai Lu <yinghailu@gmail.com>2004-10-22 18:45:36 +0000
commitccf0bc01aa00a026d136685b0f5f95109f6c85df (patch)
tree9c636208d9c2b11f9037095b28c6e8aa39b08ced /targets/tyan
parenta1653cfea55c82ab12f46e14d7ecd7e7ca5e89a8 (diff)
downloadcoreboot-ccf0bc01aa00a026d136685b0f5f95109f6c85df.tar.xz
s2735 half update
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1705 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'targets/tyan')
-rw-r--r--targets/tyan/s2735/Config.lb272
-rw-r--r--targets/tyan/s2735/ns27352
2 files changed, 26 insertions, 248 deletions
diff --git a/targets/tyan/s2735/Config.lb b/targets/tyan/s2735/Config.lb
index 7a3faf4f9c..1319482edf 100644
--- a/targets/tyan/s2735/Config.lb
+++ b/targets/tyan/s2735/Config.lb
@@ -1,265 +1,43 @@
# Sample config file for
-# the Tyan s2735
+# the Tyan s2735
# This will make a target directory of ./s2735
-loadoptions
-
target s2735
+mainboard tyan/s2735
-uses ARCH
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_SMP
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses MAINBOARD
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-#uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses CONFIG_CHIP_CONFIGURE
-
-uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_CONSOLE_SERIAL8250
-uses TTYS0_BAUD
-#SMDC Support
-#uses CONFIG_CONSOLE_SERIAL8250_2
-#uses TTYS1_BAUD
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses DEBUG
-uses CONFIG_MAX_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses LINUXBIOS_EXTRA_VERSION
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-
-uses CONFIG_FS_STREAM
-uses CONFIG_IDE
-
-uses HAVE_HARD_RESET
-
-#uses CONFIG_VGABIOS
-#uses CONFIG_REALMODE_IDT
-#uses CONFIG_PCIBIOS
-#uses VGABIOS_START
-#uses SCSIFW_START
-
-#
-#uses CONFIG_LSI_SCSI_FW_FIXUP
-
-option HAVE_OPTION_TABLE=1
-option HAVE_MP_TABLE=1
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
-#option ROM_SIZE=524288
-option ROM_SIZE=1048576
-
-option HAVE_HARD_RESET=1
-
-#option CONFIG_CONSOLE_BTEXT=1
-#option CONFIG_VGABIOS=1
-#option CONFIG_REALMODE_IDT=1
-#option CONFIG_PCIBIOS=1
-#option VGABIOS_START=0xfff8c000
-#option SCSIFW_START=0xfff80000
-
-#option CONFIG_FS_STREAM=1
-#option CONFIG_IDE=1
-
-option HAVE_FALLBACK_BOOT=1
-
-# use the new chip configure code.
-
-option CONFIG_CHIP_CONFIGURE=1
-#option CONFIG_LSI_SCSI_FW_FIXUP=1
-
-
-#
-###
-### Build code to export a programmable irq routing table
-###
-option HAVE_PIRQ_TABLE=1
-option IRQ_SLOT_COUNT=15
-#
-###
-### Build code for SMP support
-### Only worry about 2 micro processors
-###
-option CONFIG_SMP=1
-option CONFIG_MAX_CPUS=4
-option CONFIG_LOGICAL_CPUS=1
-option CONFIG_MAX_PHYSICAL_CPUS=2
-#
-###
-### Build code to setup a generic IOAPIC
-###
-option CONFIG_IOAPIC=1
-#
-###
-### MEMORY_HOLE instructs earlymtrr.inc to
-### enable caching from 0-640KB and to disable
-### caching from 640KB-1MB using fixed MTRRs
-###
-### Enabling this option breaks SMP because secondary
-### CPU identification depends on only variable MTRRs
-### being enabled.
-###
-#option MEMORY_HOLE=0
-#
-###
-### Clean up the motherboard id strings
-###
-option MAINBOARD_PART_NUMBER="S2735"
-option MAINBOARD_VENDOR="Tyan"
-###
-### Compute the location and size of where this firmware image
-### (linuxBIOS plus bootloader) will live in the boot rom chip.
-###
-#option FALLBACK_SIZE=524288
-#option FALLBACK_SIZE=98304
-option FALLBACK_SIZE=131072
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-option ROM_IMAGE_SIZE=65536
-
-
-###
-### Compute where this copy of linuxBIOS will start in the boot rom
-###
-#
-###
-
-## We do use compressed image
-option CONFIG_COMPRESS=1
-
-option CONFIG_CONSOLE_SERIAL8250=1
-option TTYS0_BAUD=115200
-
-#SMDC support
-#option CONFIG_CONSOLE_SERIAL8250_2=1
-#option TTYS1_BAUD=19200
-
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-option DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-option MAXIMUM_CONSOLE_LOGLEVEL=8
-
-option DEBUG=1
-
-#
-
-## LinuxBIOS C code runs at this location in RAM
-option _RAMBASE=0x004000
-
-##
-## Use a 32K stack
-##
-option STACK_SIZE=0x8000
-
-##
-## Use a 56K heap
-##
-option HEAP_SIZE=0xe000
-
-#
-###
-### Compute the start location and size size of
-### The linuxBIOS bootloader.
-###
-option CONFIG_ROM_STREAM = 1
-
-#
-#
+# Tyan s2735
romimage "normal"
-# 48K for SCSI FW
+# 48K for SCSI FW
# option ROM_SIZE = 475136
-# 48K for SCSI FW and 48K for ATI ROM
-# option ROM_SIZE = 425984
+# 48K for SCSI FW and 48K for ATI ROM
+# option ROM_SIZE = 425984
# 64K for Etherboot
-# option ROM_SIZE = 458752
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
- option USE_FALLBACK_IMAGE=0
- option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
- option ROM_SECTION_OFFSET= 0
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-# option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_SIZE = 65536
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s2735
-# payload ../../../payloads/e1000--ide_disk.zelf
+# option ROM_SIZE = 458752
+ option USE_FALLBACK_IMAGE=0
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+# payload ../../../payloads/tg3--ide_disk.zelf
# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo_mem_btext.elf
-# payload ../../../payloads/filo_btext.zelf
- payload ../../../payloads/e1000--filo_btext.zelf
+# payload ../../../payloads/filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
romimage "fallback"
- option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
option USE_FALLBACK_IMAGE=1
- option ROM_SECTION_SIZE = FALLBACK_SIZE
- option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
-
- option PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
- option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
- option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-
-# option XIP_ROM_SIZE = FALLBACK_SIZE
- option XIP_ROM_SIZE = 65536
- option XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
-
- mainboard tyan/s2735
-# payload ../../../payloads/e1000--ide_disk.zelf
+ option ROM_IMAGE_SIZE=0x10000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
+# payload ../../../payloads/tg3--ide_disk.zelf
+# payload ../../../payloads/filo.elf
# payload ../../../payloads/filo_mem.elf
-# payload ../../../payloads/filo_mem_btext.elf
-# payload ../../../payloads/e1000_btext.zelf
- payload ../../../payloads/e1000--filo_btext.zelf
-
+# payload ../../../payloads/filo.zelf
+# payload ../../../payloads/tg3--filo.zelf
+# payload ../../../payloads/e1000--filo.zelf
+# payload ../../../payloads/tg3--e1000--filo.zelf
+ payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/tyan/s2735/ns2735 b/targets/tyan/s2735/ns2735
index f983eb4033..865d45aedf 100644
--- a/targets/tyan/s2735/ns2735
+++ b/targets/tyan/s2735/ns2735
@@ -1,5 +1,5 @@
#!/bin/bash
-TYANMB=s27i35
+TYANMB=s2735
cd "$TYANMB"
make
#cat ../fwx.rom ../atix.rom ./normal/linuxbios.rom ./fallback/linuxbios.rom > $TYANMB"_linuxbios.rom"