Fixup EPIA-M config file so it's actually parsable by buildtarget.

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1999 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

5 files changed, 24 insertions, 288 deletions

diff --git a/targets/via/epia-m/Config.512kflash.lb b/targets/via/epia-m/Config.512kflash.lb
index 6c9bc5d898..c440de983b 100644
--- a/targets/via/epia-m/Config.512kflash.lb
+++ b/targets/via/epia-m/Config.512kflash.lb
@@ -1,64 +1,14 @@
 # Sample config file for EPIA-M
 # This will make a target directory of ./epia-m.512kflash
 
-loadoptions
-
 target epia-m.512kflash
 
-uses ARCH
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses HAVE_HARD_RESET
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses CONFIG_SMP
-uses CONFIG_MAX_CPUS
-uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses  DEFAULT_CONSOLE_LOGLEVEL
-uses  CONFIG_CONSOLE_SERIAL8250
-uses MAINBOARD
-uses CONFIG_CHIP_CONFIGURE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses LINUXBIOS_EXTRA_VERSION
-
-option CONFIG_CHIP_CONFIGURE=1
+mainboard via/epia-m
 
 option  MAXIMUM_CONSOLE_LOGLEVEL=8
 option  DEFAULT_CONSOLE_LOGLEVEL=8
 option  CONFIG_CONSOLE_SERIAL8250=1
 
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
-
 option ROM_SIZE=524288
 
 
@@ -82,12 +32,12 @@ option _RAMBASE=0x00004000
 ###
 
 #
-# Arima hdama
+# Via EPIA M
+#
 romimage "normal"
 	option USE_FALLBACK_IMAGE=0
 	option ROM_IMAGE_SIZE=0x10000
 	option LINUXBIOS_EXTRA_VERSION=".0Normal"
-	mainboard via/epia-m
 #	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
 #	payload ../../../../tg3--ide_disk.zelf	
 	payload ../../../../../lnxieepro100.ebi
@@ -97,7 +47,6 @@ romimage "fallback"
 	option USE_FALLBACK_IMAGE=1
 	option ROM_IMAGE_SIZE=0x10000
 	option LINUXBIOS_EXTRA_VERSION=".0Fallback"
-	mainboard via/epia-m
 #	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
 #	payload ../../../../tg3--ide_disk.zelf	
 	payload ../../../../../lnxieepro100.ebi
diff --git a/targets/via/epia-m/Config.etherboot.lb b/targets/via/epia-m/Config.etherboot.lb
index b19858da98..fea735586f 100644
--- a/targets/via/epia-m/Config.etherboot.lb
+++ b/targets/via/epia-m/Config.etherboot.lb
@@ -1,66 +1,14 @@
 # Sample config file for EPIA-M
 # This will make a target directory of ./epia-m
 
-loadoptions
-
 target epia-m
 
-uses ARCH
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses HAVE_HARD_RESET
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses CONFIG_SMP
-uses CONFIG_MAX_CPUS
-uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses  DEFAULT_CONSOLE_LOGLEVEL
-uses  CONFIG_CONSOLE_SERIAL8250
-uses MAINBOARD
-uses CONFIG_CHIP_CONFIGURE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses LINUXBIOS_EXTRA_VERSION
-uses TTYS0_BAUD
-
-option TTYS0_BAUD=19200
+mainboard via/epia-m
 
-option CONFIG_CHIP_CONFIGURE=1
-
-option  MAXIMUM_CONSOLE_LOGLEVEL=7
-option  DEFAULT_CONSOLE_LOGLEVEL=7
+option  MAXIMUM_CONSOLE_LOGLEVEL=8
+option  DEFAULT_CONSOLE_LOGLEVEL=8
 option  CONFIG_CONSOLE_SERIAL8250=1
 
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
 option ROM_SIZE=256*1024
 
 option HAVE_OPTION_TABLE=1
@@ -83,12 +31,12 @@ option _RAMBASE=0x00004000
 ###
 
 #
-# Arima hdama
+# Via EPIA-M
+#
 romimage "normal"
 	option USE_FALLBACK_IMAGE=0
 	option ROM_IMAGE_SIZE=0x10000
 	option LINUXBIOS_EXTRA_VERSION=".0Normal"
-	mainboard via/epia-m
 #	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
 #	payload ../../../../tg3--ide_disk.zelf	
 	payload ../../../../../lnxieepro100.ebi
@@ -98,7 +46,6 @@ romimage "fallback"
 	option USE_FALLBACK_IMAGE=1
 	option ROM_IMAGE_SIZE=0x10000
 	option LINUXBIOS_EXTRA_VERSION=".0Fallback"
-	mainboard via/epia-m
 #	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
 #	payload ../../../../tg3--ide_disk.zelf	
 	payload ../../../../../lnxieepro100.ebi
diff --git a/targets/via/epia-m/Config.filo.lb b/targets/via/epia-m/Config.filo.lb
index 8afc770066..3cdfe8c224 100644
--- a/targets/via/epia-m/Config.filo.lb
+++ b/targets/via/epia-m/Config.filo.lb
@@ -1,63 +1,14 @@
 # Sample config file for EPIA-M
 # This will make a target directory of ./epia-m
 
-loadoptions
-
 target epia-m
 
-uses ARCH
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses HAVE_HARD_RESET
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses CONFIG_SMP
-uses CONFIG_MAX_CPUS
-uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses  DEFAULT_CONSOLE_LOGLEVEL
-uses  CONFIG_CONSOLE_SERIAL8250
-uses MAINBOARD
-uses CONFIG_CHIP_CONFIGURE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses LINUXBIOS_EXTRA_VERSION
-
-option CONFIG_CHIP_CONFIGURE=1
+mainboard via/epia-m
 
 option  MAXIMUM_CONSOLE_LOGLEVEL=8
 option  DEFAULT_CONSOLE_LOGLEVEL=8
 option  CONFIG_CONSOLE_SERIAL8250=1
 
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
 option ROM_SIZE=256*1024
 
 option HAVE_OPTION_TABLE=1
@@ -80,12 +31,12 @@ option _RAMBASE=0x00004000
 ###
 
 #
-# Arima hdama
+# EPIA-M
+#
 romimage "normal"
 	option USE_FALLBACK_IMAGE=0
 	option ROM_IMAGE_SIZE=0x10000
 	option LINUXBIOS_EXTRA_VERSION=".0Normal"
-	mainboard via/epia-m
 #	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
 #	payload ../../../../tg3--ide_disk.zelf	
 #	payload ../../../../../lnxieepro100.ebi
@@ -96,7 +47,6 @@ romimage "fallback"
 	option USE_FALLBACK_IMAGE=1
 	option ROM_IMAGE_SIZE=0x10000
 	option LINUXBIOS_EXTRA_VERSION=".0Fallback"
-	mainboard via/epia-m
 #	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
 #	payload ../../../../tg3--ide_disk.zelf	
 #	payload ../../../../../lnxieepro100.ebi
diff --git a/targets/via/epia-m/Config.lb b/targets/via/epia-m/Config.lb
index ca87c7ba47..baf066eb54 100644
--- a/targets/via/epia-m/Config.lb
+++ b/targets/via/epia-m/Config.lb
@@ -1,78 +1,24 @@
 # Sample config file for EPIA-M
 # This will make a target directory of ./epia-m
 
-loadoptions
-
 target epia-m
 
-uses ARCH
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses HAVE_HARD_RESET
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses CONFIG_SMP
-uses CONFIG_MAX_CPUS
-uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses  DEFAULT_CONSOLE_LOGLEVEL
-uses  CONFIG_CONSOLE_SERIAL8250
-uses MAINBOARD
-uses CONFIG_CHIP_CONFIGURE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses LINUXBIOS_EXTRA_VERSION
-uses HAVE_ACPI_TABLES
-uses CONFIG_LEGACY_VGABIOS
-uses VGABIOS_START
-uses VGABIOS_START
-option CONFIG_CHIP_CONFIGURE=1
+mainboard via/epia-m
 
 option  MAXIMUM_CONSOLE_LOGLEVEL=8
 option  DEFAULT_CONSOLE_LOGLEVEL=8
 option  CONFIG_CONSOLE_SERIAL8250=1
-option HAVE_ACPI_TABLES=1
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
+
 option ROM_SIZE=256*1024
-option CONFIG_LEGACY_VGABIOS=1
 option HAVE_OPTION_TABLE=1
 option CONFIG_ROM_STREAM=1
 option HAVE_FALLBACK_BOOT=1
 
-option VGABIOS_START=0xfffc0000
 ###
 ### Compute the location and size of where this firmware image
 ### (linuxBIOS plus bootloader) will live in the boot rom chip.
 ###
-option FALLBACK_SIZE=0x18000
+option FALLBACK_SIZE=131072
 
 ## LinuxBIOS C code runs at this location in RAM
 option _RAMBASE=0x00004000
@@ -84,29 +30,26 @@ option _RAMBASE=0x00004000
 ###
 
 #
-# Arima hdama
+# Via EPIA-M
+#
 romimage "normal"
 	option USE_FALLBACK_IMAGE=0
-	option ROM_IMAGE_SIZE=0xc000
-	option ROM_SECTION_OFFSET=0x10000
-	option ROM_SECTION_SIZE=0x18000
+	option ROM_IMAGE_SIZE=0x10000
 	option LINUXBIOS_EXTRA_VERSION=".0Normal"
-	mainboard via/epia-m
 #	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
 #	payload ../../../../tg3--ide_disk.zelf	
 #	payload ../../../../../lnxieepro100.ebi
-	payload /filo.elf
+	payload ../../../payloads/filo.elf
 end
 
 romimage "fallback" 
 	option USE_FALLBACK_IMAGE=1
-	option ROM_IMAGE_SIZE=0xc000
+	option ROM_IMAGE_SIZE=0x10000
 	option LINUXBIOS_EXTRA_VERSION=".0Fallback"
-	mainboard via/epia-m
 #	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
 #	payload ../../../../tg3--ide_disk.zelf	
 #	payload ../../../../../lnxieepro100.ebi
-	payload /filo.elf
+	payload ../../../payloads/filo.elf
 end
 
 buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/via/epia-m/Config.vga.filo b/targets/via/epia-m/Config.vga.filo
index ca87c7ba47..e381bc918e 100644
--- a/targets/via/epia-m/Config.vga.filo
+++ b/targets/via/epia-m/Config.vga.filo
@@ -1,66 +1,14 @@
 # Sample config file for EPIA-M
 # This will make a target directory of ./epia-m
 
-loadoptions
-
 target epia-m
 
-uses ARCH
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses HAVE_HARD_RESET
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses CONFIG_SMP
-uses CONFIG_MAX_CPUS
-uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses  DEFAULT_CONSOLE_LOGLEVEL
-uses  CONFIG_CONSOLE_SERIAL8250
-uses MAINBOARD
-uses CONFIG_CHIP_CONFIGURE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses LINUXBIOS_EXTRA_VERSION
-uses HAVE_ACPI_TABLES
-uses CONFIG_LEGACY_VGABIOS
-uses VGABIOS_START
-uses VGABIOS_START
-option CONFIG_CHIP_CONFIGURE=1
+mainboard via/epia-m
 
 option  MAXIMUM_CONSOLE_LOGLEVEL=8
 option  DEFAULT_CONSOLE_LOGLEVEL=8
 option  CONFIG_CONSOLE_SERIAL8250=1
-option HAVE_ACPI_TABLES=1
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
+
 option ROM_SIZE=256*1024
 option CONFIG_LEGACY_VGABIOS=1
 option HAVE_OPTION_TABLE=1
@@ -84,14 +32,14 @@ option _RAMBASE=0x00004000
 ###
 
 #
-# Arima hdama
+# EPIA-M
+#
 romimage "normal"
 	option USE_FALLBACK_IMAGE=0
 	option ROM_IMAGE_SIZE=0xc000
 	option ROM_SECTION_OFFSET=0x10000
 	option ROM_SECTION_SIZE=0x18000
 	option LINUXBIOS_EXTRA_VERSION=".0Normal"
-	mainboard via/epia-m
 #	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
 #	payload ../../../../tg3--ide_disk.zelf	
 #	payload ../../../../../lnxieepro100.ebi
@@ -102,7 +50,6 @@ romimage "fallback"
 	option USE_FALLBACK_IMAGE=1
 	option ROM_IMAGE_SIZE=0xc000
 	option LINUXBIOS_EXTRA_VERSION=".0Fallback"
-	mainboard via/epia-m
 #	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
 #	payload ../../../../tg3--ide_disk.zelf	
 #	payload ../../../../../lnxieepro100.ebi