clean up epia targets

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2433 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

2 files changed, 25 insertions, 45 deletions

diff --git a/targets/via/epia-m/Config.lb b/targets/via/epia-m/Config.lb
index 1d204819e4..bc46e26b73 100644
--- a/targets/via/epia-m/Config.lb
+++ b/targets/via/epia-m/Config.lb
@@ -1,8 +1,6 @@
-# Sample config file for EPIA-M
-# This will make a target directory of ./epia-m
-
-target epia-m
+# abuild config file for EPIA-M
 
+target via_epia-m
 mainboard via/epia-m
 
 option  MAXIMUM_CONSOLE_LOGLEVEL=8
@@ -10,52 +8,41 @@ option  DEFAULT_CONSOLE_LOGLEVEL=8
 option  CONFIG_CONSOLE_SERIAL8250=1
 
 option ROM_SIZE=256*1024
+
+
 option HAVE_OPTION_TABLE=1
 option CONFIG_ROM_STREAM=1
 option HAVE_FALLBACK_BOOT=1
+#option CONFIG_COMPRESSED_ROM_STREAM=1
+option CONFIG_COMPRESSED_ROM_STREAM=0
+
 
 ###
 ### Compute the location and size of where this firmware image
 ### (linuxBIOS plus bootloader) will live in the boot rom chip.
 ###
-option FALLBACK_SIZE=0x30000
+option FALLBACK_SIZE=131072
 
 ## LinuxBIOS C code runs at this location in RAM
 option _RAMBASE=0x00004000
 
 #
-###
-### Compute the start location and size size of
-### The linuxBIOS bootloader.
-###
-
+# Via EPIA M
 #
-# EPIA-M
-#
-#romimage "normal"
-#	option USE_FALLBACK_IMAGE=0
-#	option ROM_IMAGE_SIZE=0xc000
-#	option ROM_SECTION_OFFSET=0x10000
-#	option ROM_SECTION_SIZE=0x18000
-#	option XIP_ROM_BASE=0xfffd0000
-#	option LINUXBIOS_EXTRA_VERSION=".0Normal"
-#	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
-#	payload ../../../../tg3--ide_disk.zelf	
-#	payload ../../../../../lnxieepro100.ebi
-#	payload /filo.elf
-#end
+romimage "normal"
+	option USE_FALLBACK_IMAGE=0
+#option ROM_IMAGE_SIZE=128*1024
+	option ROM_IMAGE_SIZE=64*1024
+	option LINUXBIOS_EXTRA_VERSION=".0-Normal"
+	payload $(HOME)/svn/payload.elf
+end
 
 romimage "fallback" 
 	option USE_FALLBACK_IMAGE=1
-	option ROM_IMAGE_SIZE=0x10000
-	option ROM_SECTION_OFFSET=0x10000
-	option ROM_SECTION_SIZE=0x30000
-#	option XIP_ROM_BASE=0xfffe0000
-	option LINUXBIOS_EXTRA_VERSION=".0Fallback"
-#	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
-#	payload ../../../../tg3--ide_disk.zelf	
-#	payload ../../../../../lnxieepro100.ebi
-	payload /filo.elf
+	#option ROM_IMAGE_SIZE=128*1024
+	option ROM_IMAGE_SIZE=60*1024
+	option LINUXBIOS_EXTRA_VERSION=".0-Fallback"
+	payload $(HOME)/svn/payload.elf
 end
 
-buildrom ./linuxbios.rom ROM_SIZE  "fallback"
+buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
diff --git a/targets/via/epia-m/Config.vga.filo b/targets/via/epia-m/Config.vga.filo
index 0756650bba..6e58655067 100644
--- a/targets/via/epia-m/Config.vga.filo
+++ b/targets/via/epia-m/Config.vga.filo
@@ -23,7 +23,6 @@ option FALLBACK_SIZE=0x18000
 ## LinuxBIOS C code runs at this location in RAM
 option _RAMBASE=0x00004000
 
-#
 ###
 ### Compute the start location and size size of
 ### The linuxBIOS bootloader.
@@ -37,21 +36,15 @@ romimage "normal"
 	option ROM_IMAGE_SIZE=0xc000
 	option ROM_SECTION_OFFSET=0x10000
 	option ROM_SECTION_SIZE=0x18000
-	option LINUXBIOS_EXTRA_VERSION=".0Normal"
-#	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
-#	payload ../../../../tg3--ide_disk.zelf	
-#	payload ../../../../../lnxieepro100.ebi
-	payload /filo.elf
+	option LINUXBIOS_EXTRA_VERSION=".0-Normal"
+	payload $(HOME)/svn/filo.elf
 end
 
 romimage "fallback" 
 	option USE_FALLBACK_IMAGE=1
 	option ROM_IMAGE_SIZE=0xc000
-	option LINUXBIOS_EXTRA_VERSION=".0Fallback"
-#	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
-#	payload ../../../../tg3--ide_disk.zelf	
-#	payload ../../../../../lnxieepro100.ebi
-	payload /filo.elf
+	option LINUXBIOS_EXTRA_VERSION=".0-Fallback"
+	payload $(HOME)/svn/filo.elf
 end
 
 buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"