util/blobtool: rename to bincfg

The name blobtool is confusing as 'blob' is also used to
describe nonfree software in binary form.

Since this utility deals with binary configurations it
makes more sense to call it bincfg.

Change-Id: I3339274f1c42df4bb4a6b30b9538d91c3c03d7d0
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/23239
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

1 files changed, 0 insertions, 368 deletions

diff --git a/util/blobtool/it8718f-ec.spec b/util/blobtool/it8718f-ec.spec
deleted file mode 100644
index 7fa325f203..0000000000
--- a/util/blobtool/it8718f-ec.spec
+++ /dev/null
@@ -1,368 +0,0 @@
-# ITE IT8718F SuperIO EC registers
-{
-	# 00 Configuration register
-	"conf00_start"		: 1,
-	"conf00_smien"		: 1,
-	"conf00_irqen"		: 1,
-	"conf00_irqclr"		: 1,
-	"conf00_ro_one"		: 1,
-	"conf00_copen"		: 1,
-	"conf00_vbat"		: 1,
-	"conf00_initreset"	: 1,
-
-	# 01 Interrupt Status register 1
-	"irq1_maxfantac1"	: 1,
-	"irq1_maxfantac2"	: 1,
-	"irq1_maxfantac3"	: 1,
-	"irq1_maxfantac4"	: 1,
-	"irq1_copen"		: 1,
-	"irq1_reserved0"	: 1,
-	"irq1_maxfantac5"	: 1,
-	"irq1_reserved1"	: 1,
-
-	# 02 Interrupt Status register 2
-	"irq2_limit_vin"[8]	: 1,
-
-	# 03 Interrupt Status register 3
-	"irq3_limit_temp1"	: 1,
-	"irq3_limit_temp2"	: 1,
-	"irq3_limit_temp3"	: 1,
-	"irq3_reserved"		: 5,
-
-	# 04 SMI Mask register 1
-	"smi1_dis_fantac1"	: 1,
-	"smi1_dis_fantac2"	: 1,
-	"smi1_dis_fantac3"	: 1,
-	"smi1_dis_fantac4"	: 1,
-	"smi1_dis_copen"	: 1,
-	"smi1_reserved0"	: 1,
-	"smi1_dis_fantac5"	: 1,
-	"smi1_reserved1"	: 1,
-
-	# 05 SMI Mask register 2
-	"smi2_dis_vin"[8]	: 1,
-
-	# 06 SMI Mask register 3
-	"smi3_dis_temp1"	: 1,
-	"smi3_dis_temp2"	: 1,
-	"smi3_dis_temp3"	: 1,
-	"smi3_reserved"		: 5,
-
-	# 07 Interrupt Mask register 1
-	"irqmask1_fantac1"	: 1,
-	"irqmask1_fantac2"	: 1,
-	"irqmask1_fantac3"	: 1,
-	"irqmask1_fantac4"	: 1,
-	"irqmask1_copen"	: 1,
-	"irqmask1_reserved0"	: 1,
-	"irqmask1_fantac5"	: 1,
-	"irqmask1_reserved1"	: 1,
-
-	# 08 Interrupt Mask register 2
-	"irqmask2_vin"[8]	: 1,
-
-	# 09 Interrupt Mask register 3
-	"irqmask3_temp1"	: 1,
-	"irqmask3_temp2"	: 1,
-	"irqmask3_temp3"	: 1,
-	"irqmask3_reserved"	: 4,
-	"irqmask3_extsensor"	: 1,
-
-	# 0a Interface Selection register
-	"iface_reserved"	: 4,
-	"iface_extsensor_select": 3,
-	"iface_pseudo_eoc"	: 1,
-
-	# 0b Fan PWM smoothing step selection reg
-	"fanpwm_reserved"	: 6,
-	"fanpwm_smoothing_step"	: 2,
-
-	# 0c Fan Tachometer 16 bit enable register
-	"fantach16_en_tac1"	: 1,
-	"fantach16_en_tac2"	: 1,
-	"fantach16_en_tac3"	: 1,
-	"fantach16_tmpin1_enh"	: 1,
-	"fantach16_en_tac4"	: 1,
-	"fantach16_en_tac5"	: 1,
-	"fantach16_tmpin2_enh"	: 1,
-	"fantach16_tmpin3_enh"	: 1,
-
-	# 0d-0f Fan Tachmometer read registers
-	"fantach_lo_counts1"	: 8,
-	"fantach_lo_counts2"	: 8,
-	"fantach_lo_counts3"	: 8,
-
-	# 10-12 Fan Tachometer limit registers
-	"fantach_lo_limit1"	: 8,
-	"fantach_lo_limit2"	: 8,
-	"fantach_lo_limit3"	: 8,
-
-	# 13 Fan controller main control register
-	"fanctlmain_mode1"	: 1,
-	"fanctlmain_mode2"	: 1,
-	"fanctlmain_mode3"	: 1,
-	"fanctlmain_reserved0"	: 1,
-	"fanctlmain_en_tac1"	: 1,
-	"fanctlmain_en_tac2"	: 1,
-	"fanctlmain_en_tac3"	: 1,
-	"fanctlmain_reserved1"	: 1,
-
-	# 14 FAN_CTL control register
-	"fanctl_enable1"	: 1,
-	"fanctl_enable2"	: 1,
-	"fanctl_enable3"	: 1,
-	"fanctl_minduty_sel"	: 1,
-	# 000: 48Mhz (PWM Frequency 375Khz)
-	# 001: 24Mhz (PWM Frequency 187.5Khz)
-	# 010: 12Mhz (PWM Frequency 93.75Khz)
-	# 011: 8Mhz (PWM Frequency 62.5Khz)
-	# 100: 6Mhz (PWM Frequency 46.875Khz)
-	# 101: 3Mhz (PWM Frequency 23.43Khz)
-	# 110: 1.5Mhz (PWM Frequency 11.7Khz)
-	# 111: 0.75Mhz (PWM Frequency 5.86Khz)
-	"fanctl_pwm_base_clock"	: 3,
-	"fanctl_allpolarity"	: 1,
-
-	# 15 FAN_CTL1 PWM control register
-	"fanctl1_tmpin_sel"	: 2,
-	"fanctl1_steps"		: 5,
-	"fanctl1_pwm_mode"	: 1,
-
-	# 16 FAN_CTL2 PWM control register
-	"fanctl2_tmpin_sel"	: 2,
-	"fanctl2_steps"		: 5,
-	"fanctl2_pwm_mode"	: 1,
-
-	# 17 FAN_CTL3 PWM control register
-	"fanctl3_tmpin_sel"	: 2,
-	"fanctl3_steps"		: 5,
-	"fanctl3_pwm_mode"	: 1,
-
-	# 18-1a Fan Tachometer extended read registers
-	"fantach_hi_counts1"	: 8,
-	"fantach_hi_counts2"	: 8,
-	"fantach_hi_counts3"	: 8,
-
-	# 1b-1d Fan Tachometer extended limit registers
-	"fantach_hi_limit1"	: 8,
-	"fantach_hi_limit2"	: 8,
-	"fantach_hi_limit3"	: 8,
-
-	"reserved1e"		: 8,
-	"reserved1f"		: 8,
-
-
-	# 20-27 Reading registers
-	"vin"[8]		: 8,
-
-	"vbat"			: 8,
-	"tmpin1"		: 8,
-	"tmpin2"		: 8,
-	"tmpin3"		: 8,
-	"reserved2c"		: 8,
-	"reserved2d"		: 8,
-	"reserved2e"		: 8,
-	"reserved2f"		: 8,
-	"limit_hi_vin0"		: 8,
-	"limit_lo_vin0"		: 8,
-	"limit_hi_vin1"		: 8,
-	"limit_lo_vin1"		: 8,
-	"limit_hi_vin2"		: 8,
-	"limit_lo_vin2"		: 8,
-	"limit_hi_vin3"		: 8,
-	"limit_lo_vin3"		: 8,
-	"limit_hi_vin4"		: 8,
-	"limit_lo_vin4"		: 8,
-	"limit_hi_vin5"		: 8,
-	"limit_lo_vin5"		: 8,
-	"limit_hi_vin6"		: 8,
-	"limit_lo_vin6"		: 8,
-	"limit_hi_vin7"		: 8,
-	"limit_lo_vin7"		: 8,
-	"limit_hi_tmpin1"	: 8,
-	"limit_lo_tmpin1"	: 8,
-	"limit_hi_tmpin2"	: 8,
-	"limit_lo_tmpin2"	: 8,
-	"limit_hi_tmpin3"	: 8,
-	"limit_lo_tmpin3"	: 8,
-
-	"reserved46"		: 8,
-	"reserved47"		: 8,
-	"reserved48"		: 8,
-	"reserved49"		: 8,
-	"reserved4a"		: 8,
-	"reserved4b"		: 8,
-	"reserved4c"		: 8,
-	"reserved4d"		: 8,
-	"reserved4e"		: 8,
-	"reserved4f"		: 8,
-
-	# 50 ADC Voltage channel enable register
-	"adc_scan_enable_vin"[8]: 1,
-
-	# 51 ADC Temperature channel enable register
-	"therm_diode_tmpin1"	: 1,
-	"therm_diode_tmpin2"	: 1,
-	"therm_diode_tmpin3"	: 1,
-	# Mututally exclusive settings
-	"therm_resistor_tmpin1"	: 1,
-	"therm_resistor_tmpin2"	: 1,
-	"therm_resistor_tmpin3"	: 1,
-	"therm_reserved"	: 2,
-
-	"therm_limit_tmpin1"	: 8,
-	"therm_limit_tmpin2"	: 8,
-	"therm_limit_tmpin3"	: 8,
-
-	# 55 Temperature extra channel enable reg
-	"therm_resistor_vin4"	: 1,
-	"therm_resistor_vin5"	: 1,
-	"therm_resistor_vin6"	: 1,
-	"adc_fanctl2_pwm_duty"	: 1,
-	# 000: 48Mhz (PWM Frequency 375Khz)
-	# 001: 24Mhz (PWM Frequency 187.5Khz)
-	# 010: 12Mhz (PWM Frequency 93.75Khz)
-	# 011: 8Mhz (PWM Frequency 62.5Khz)
-	# 100: 6Mhz (PWM Frequency 46.875Khz)
-	# 101: 3Mhz (PWM Frequency 23.43Khz)
-	# 110: 1.5Mhz (PWM Frequency 11.7Khz)
-	# 111: 0.75Mhz (PWM Frequency 5.86Khz)
-	"adc_fanctl2_pwm_bclk"	: 3,
-	"adc_tmpin3_ext_select"	: 1,
-
-	"thermal_zero_diode1"	: 8,
-	"thermal_zero_diode2"	: 8,
-	"ite_vendor_id"		: 8,
-	"thermal_zero_diode3"	: 8,
-	"reserved5a"		: 8,
-	"ite_code_id"		: 8,
-
-	"beep_fantac"		: 1,
-	"beep_vin"		: 1,
-	"beep_tmpin"		: 1,
-	"beep_reserved"		: 1,
-	# ADC clock select
-	# 000: 500Khz (Default)
-	# 001: 250Khz
-	# 010: 125K
-	# 011: 62.5Khz
-	# 100: 31.25Khz
-	# 101: 24Mhz
-	# 110: 1Mhz
-	# 111: 2Mhz
-	"adc_clock_select"	: 3,
-	"thermal_zero_adj_en"	: 1,
-
-	"beep_fan_freq_div"	: 4,
-	"beep_fan_tone_div"	: 4,
-	"beep_volt_freq_div"	: 4,
-	"beep_volt_tone_div"	: 4,
-	"beep_temp_freq_div"	: 4,
-	"beep_temp_tone_div"	: 4,
-
-	# 60 SmartGuardian registers
-	"sguard1_temp_lim_off"	: 8,
-	"sguard1_temp_lim_fan"	: 8,
-	"reserved62"		: 8,
-	"sguard1_pwm_start"	: 7,
-	"sguard1_pwm_slope6"	: 1,
-	"sguard1_pwm_slope05"	: 6,
-	"sguard1_pwm_reserved"	: 1,
-	"sguard1_fan_smooth_en"	: 1,
-	"sguard1_temp_interval"	: 5,
-	"sguard1_temp_reserved"	: 2,
-	"sguard1_temp_pwm_lin"	: 1,
-	"reserved66"		: 8,
-	"reserved67"		: 8,
-	"sguard2_temp_lim_off"	: 8,
-	"sguard2_temp_lim_fan"	: 8,
-	"reserved6a"		: 8,
-	"sguard2_pwm_start"	: 7,
-	"sguard2_pwm_slope6"	: 1,
-	"sguard2_pwm_slope05"	: 6,
-	"sguard2_pwm_reserved"	: 1,
-	"sguard2_fan_smooth_en"	: 1,
-	"sguard2_temp_interval"	: 5,
-	"sguard2_temp_reserved"	: 2,
-	"sguard2_temp_pwm_lin"	: 1,
-	"reserved6e"		: 8,
-	"reserved6f"		: 8,
-	"sguard3_temp_lim_off"	: 8,
-	"sguard3_temp_lim_fan"	: 8,
-	"reserved72"		: 8,
-	"sguard3_pwm_start"	: 7,
-	"sguard3_pwm_slope6"	: 1,
-	"sguard3_pwm_slope05"	: 6,
-	"sguard3_pwm_reserved"	: 1,
-	"sguard3_fan_smooth_en"	: 1,
-	"sguard3_temp_interval"	: 5,
-	"sguard3_temp_reserved"	: 2,
-	"sguard3_temp_pwm_lin"	: 1,
-	"reserved76"		: 8,
-	"reserved77"		: 8,
-	"reserved78"		: 8,
-	"reserved79"		: 8,
-	"reserved7a"		: 8,
-	"reserved7b"		: 8,
-	"reserved7c"		: 8,
-	"reserved7d"		: 8,
-	"reserved7e"		: 8,
-	"reserved7f"		: 8,
-
-	# 80 Fan Tachometer 4-5 read registers
-	"fantach_lo_counts4"	: 8,
-	"fantach_hi_counts4"	: 8,
-	"fantach_lo_counts5"	: 8,
-	"fantach_hi_counts5"	: 8,
-	"fantach_lo_limit4"	: 8,
-	"fantach_hi_limit4"	: 8,
-	"fantach_lo_limit5"	: 8,
-	"fantach_hi_limit5"	: 8,
-
-	# 88 External temperature sensor host status
-	"ext_host_busy"		: 1,
-	"ext_host_fnsh"		: 1,
-	"ext_host_r_fcs_error"	: 1,
-	"ext_host_w_fcs_error"	: 1,
-	"ext_host_peci_highz"	: 1,
-	"ext_host_sst_slave"	: 1,
-	"ext_host_sst_bus"	: 1,
-	"ext_host_data_fifo_clr": 1,
-
-	"ext_host_target_addr"	: 8,
-	"ext_host_write_length"	: 8,
-	"ext_host_read_length"	: 8,
-	"ext_host_cmd"		: 8,
-	"ext_host_writedata"	: 8,
-
-	"ext_hostctl_start"	: 1,
-	"ext_hostctl_sst_amdsi"	: 1,
-	"ext_hostctl_sst_ctl"	: 1,
-	"ext_hostctl_resetfifo"	: 1,
-	"ext_hostctl_fcs_abort"	: 1,
-	"ext_hostctl_start_en"	: 1,
-	# Auto-Start Control
-	# The host will start the transaction
-	# at a regular rate automatically.
-	# 00: 32 Hz
-	# 01: 16 Hz
-	# 10: 8 Hz
-	# 11: 4 Hz
-	"ext_hostctl_start_ctl"	: 2,
-
-	"ext_host_readdata"	: 8,
-
-	"fan1_temp_limit_start"	: 8,
-	"fan1_slope_pwm"	: 7,
-	"fan1_temp_input_sel0"	: 1,
-	"fan1_ctlmode_temp_ivl"	: 5,
-	"fan1_ctlmode_target"	: 2,
-	"fan1_temp_input_sel1"	: 1,
-	"reserved93"		: 8,
-	"fan2_temp_limit_start"	: 8,
-	"fan2_slope_pwm"	: 7,
-	"fan2_temp_input_sel0"	: 1,
-	"fan2_ctlmode_temp_ivl"	: 5,
-	"fan2_ctlmode_target"	: 2,
-	"fan2_temp_input_sel1"	: 1
-}