diff options
author | Arthur Heymans <arthur@aheymans.xyz> | 2019-11-28 16:14:56 +0100 |
---|---|---|
committer | Patrick Georgi <pgeorgi@google.com> | 2019-12-27 09:00:16 +0000 |
commit | 945b698f82279fdb42f83f6a3eb2e6f74db2869c (patch) | |
tree | 3eac3bd7ec5032441081d89a370acddf8f3e5f5b /util/romcc/tests/raminit_test.c | |
parent | c2092569d5d21e0cdd3690d8021c2d46dfeaeabd (diff) | |
download | coreboot-945b698f82279fdb42f83f6a3eb2e6f74db2869c.tar.xz |
util/romcc: Drop romcc support
Finally all boards use a GCC compiled bootblock!
Change-Id: I0c9a1b19dbdc32b43875da7d685718bae9d7f5f4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37337
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'util/romcc/tests/raminit_test.c')
-rw-r--r-- | util/romcc/tests/raminit_test.c | 1292 |
1 files changed, 0 insertions, 1292 deletions
diff --git a/util/romcc/tests/raminit_test.c b/util/romcc/tests/raminit_test.c deleted file mode 100644 index 564786b51c..0000000000 --- a/util/romcc/tests/raminit_test.c +++ /dev/null @@ -1,1292 +0,0 @@ -#define HAVE_STRING_SUPPORT 0 -#define HAVE_CAST_SUPPORT 1 -#define HAVE_STATIC_ARRAY_SUPPORT 1 -#define HAVE_POINTER_SUPPORT 1 -#define HAVE_MACRO_ARG_SUPPORT 0 - -void outb(unsigned char value, unsigned short port) -{ - __builtin_outb(value, port); -} - -void outw(unsigned short value, unsigned short port) -{ - __builtin_outw(value, port); -} - -void outl(unsigned int value, unsigned short port) -{ - __builtin_outl(value, port); -} - -unsigned char inb(unsigned short port) -{ - return __builtin_inb(port); -} - -unsigned char inw(unsigned short port) -{ - return __builtin_inw(port); -} - -unsigned char inl(unsigned short port) -{ - return __builtin_inl(port); -} - -static unsigned int config_cmd(unsigned char bus, unsigned devfn, unsigned where) -{ - return 0x80000000 | (bus << 16) | (devfn << 8) | (where & ~3); -} - -static unsigned char pcibios_read_config_byte( - unsigned char bus, unsigned devfn, unsigned where) -{ - outl(config_cmd(bus, devfn, where), 0xCF8); - return inb(0xCFC + (where & 3)); -} - -static unsigned short pcibios_read_config_word( - unsigned char bus, unsigned devfn, unsigned where) -{ - outl(config_cmd(bus, devfn, where), 0xCF8); - return inw(0xCFC + (where & 2)); -} - -static unsigned int pcibios_read_config_dword( - unsigned char bus, unsigned devfn, unsigned where) -{ - outl(config_cmd(bus, devfn, where), 0xCF8); - return inl(0xCFC); -} - - -static void pcibios_write_config_byte( - unsigned char bus, unsigned devfn, unsigned where, unsigned char value) -{ - outl(config_cmd(bus, devfn, where), 0xCF8); - outb(value, 0xCFC + (where & 3)); -} - -static void pcibios_write_config_word( - unsigned char bus, unsigned devfn, unsigned where, unsigned short value) -{ - outl(config_cmd(bus, devfn, where), 0xCF8); - outw(value, 0xCFC + (where & 2)); -} - -static void pcibios_write_config_dword( - unsigned char bus, unsigned devfn, unsigned where, unsigned int value) -{ - outl(config_cmd(bus, devfn, where), 0xCF8); - outl(value, 0xCFC); -} - -/* Base Address */ -#ifndef CONFIG_TTYS0_BASE -#define CONFIG_TTYS0_BASE 0x3f8 -#endif - -#ifndef CONFIG_TTYS0_BAUD -#define CONFIG_TTYS0_BAUD 115200 -#endif - -#if ((115200%CONFIG_TTYS0_BAUD) != 0) -#error Bad ttys0 baud rate -#endif - -#define CONFIG_TTYS0_DIV (115200/CONFIG_TTYS0_BAUD) - -/* Line Control Settings */ -#ifndef CONFIG_TTYS0_LCS -/* Set 8bit, 1 stop bit, no parity */ -#define CONFIG_TTYS0_LCS 0x3 -#endif - -#define UART_LCS CONFIG_TTYS0_LCS - -/* Data */ -#define UART_RBR 0x00 -#define UART_TBR 0x00 - -/* Control */ -#define UART_IER 0x01 -#define UART_IIR 0x02 -#define UART_FCR 0x02 -#define UART_LCR 0x03 -#define UART_MCR 0x04 -#define UART_DLL 0x00 -#define UART_DLM 0x01 - -/* Status */ -#define UART_LSR 0x05 -#define UART_MSR 0x06 -#define UART_SCR 0x07 - -int uart_can_tx_byte(void) -{ - return inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x20; -} - -void uart_wait_to_tx_byte(void) -{ - while(!uart_can_tx_byte()) - ; -} - -void uart_wait_until_sent(void) -{ - while(!(inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x40)) - ; -} - -void uart_tx_byte(unsigned char data) -{ - uart_wait_to_tx_byte(); - outb(data, CONFIG_TTYS0_BASE + UART_TBR); - /* Make certain the data clears the fifos */ - uart_wait_until_sent(); -} - -void uart_init(void) -{ - /* disable interrupts */ - outb(0x0, CONFIG_TTYS0_BASE + UART_IER); - /* enable fifo's */ - outb(0x01, CONFIG_TTYS0_BASE + UART_FCR); - /* Set Baud Rate Divisor to 12 ==> 115200 Baud */ - outb(0x80 | UART_LCS, CONFIG_TTYS0_BASE + UART_LCR); - outb(CONFIG_TTYS0_DIV & 0xFF, CONFIG_TTYS0_BASE + UART_DLL); - outb((CONFIG_TTYS0_DIV >> 8) & 0xFF, CONFIG_TTYS0_BASE + UART_DLM); - outb(UART_LCS, CONFIG_TTYS0_BASE + UART_LCR); -} - -void __console_tx_char(unsigned char byte) -{ - uart_tx_byte(byte); -} -void __console_tx_nibble(unsigned nibble) -{ - unsigned char digit; - digit = nibble + '0'; - if (digit > '9') { - digit += 39; - } - __console_tx_char(digit); -} -void __console_tx_hex8(unsigned char byte) -{ - __console_tx_nibble(byte >> 4); - __console_tx_nibble(byte & 0x0f); -} - -void __console_tx_hex32(unsigned char value) -{ - __console_tx_nibble((value >> 28) & 0x0f); - __console_tx_nibble((value >> 24) & 0x0f); - __console_tx_nibble((value >> 20) & 0x0f); - __console_tx_nibble((value >> 16) & 0x0f); - __console_tx_nibble((value >> 12) & 0x0f); - __console_tx_nibble((value >> 8) & 0x0f); - __console_tx_nibble((value >> 4) & 0x0f); - __console_tx_nibble(value & 0x0f); -} - -#if HAVE_STRING_SUPPORT -void __console_tx_string(char *str) -{ - unsigned char ch; - while((ch = *str++) != '\0') { - __console_tx_char(ch); - } -} -#else -void __console_tx_string(char *str) -{ -} -#endif - - -void print_emerg_char(unsigned char byte) { __console_tx_char(byte); } -void print_emerg_hex8(unsigned char value) { __console_tx_hex8(value); } -void print_emerg_hex32(unsigned int value) { __console_tx_hex32(value); } -void print_emerg(char *str) { __console_tx_string(str); } - -void print_alert_char(unsigned char byte) { __console_tx_char(byte); } -void print_alert_hex8(unsigned char value) { __console_tx_hex8(value); } -void print_alert_hex32(unsigned int value) { __console_tx_hex32(value); } -void print_alert(char *str) { __console_tx_string(str); } - -void print_crit_char(unsigned char byte) { __console_tx_char(byte); } -void print_crit_hex8(unsigned char value) { __console_tx_hex8(value); } -void print_crit_hex32(unsigned int value) { __console_tx_hex32(value); } -void print_crit(char *str) { __console_tx_string(str); } - -void print_err_char(unsigned char byte) { __console_tx_char(byte); } -void print_err_hex8(unsigned char value) { __console_tx_hex8(value); } -void print_err_hex32(unsigned int value) { __console_tx_hex32(value); } -void print_err(char *str) { __console_tx_string(str); } - -void print_warning_char(unsigned char byte) { __console_tx_char(byte); } -void print_warning_hex8(unsigned char value) { __console_tx_hex8(value); } -void print_warning_hex32(unsigned int value) { __console_tx_hex32(value); } -void print_warning(char *str) { __console_tx_string(str); } - -void print_notice_char(unsigned char byte) { __console_tx_char(byte); } -void print_notice_hex8(unsigned char value) { __console_tx_hex8(value); } -void print_notice_hex32(unsigned int value) { __console_tx_hex32(value); } -void print_notice(char *str) { __console_tx_string(str); } - -void print_info_char(unsigned char byte) { __console_tx_char(byte); } -void print_info_hex8(unsigned char value) { __console_tx_hex8(value); } -void print_info_hex32(unsigned int value) { __console_tx_hex32(value); } -void print_info(char *str) { __console_tx_string(str); } - -void print_debug_char(unsigned char byte) { __console_tx_char(byte); } -void print_debug_hex8(unsigned char value) { __console_tx_hex8(value); } -void print_debug_hex32(unsigned int value) { __console_tx_hex32(value); } -void print_debug(char *str) { __console_tx_string(str); } - -void print_spew_char(unsigned char byte) { __console_tx_char(byte); } -void print_spew_hex8(unsigned char value) { __console_tx_hex8(value); } -void print_spew_hex32(unsigned int value) { __console_tx_hex32(value); } -void print_spew(char *str) { __console_tx_string(str); } - -#define PIIX4_DEVFN 0x90 -#define SMBUS_MEM_DEVICE_START 0x50 -#define SMBUS_MEM_DEVICE_END 0x53 -#define SMBUS_MEM_DEVICE_INC 1 - - -#define PM_BUS 0 -#define PM_DEVFN (PIIX4_DEVFN+3) - -#define SMBUS_IO_BASE 0x1000 -#define SMBHSTSTAT 0 -#define SMBHSTCTL 2 -#define SMBHSTCMD 3 -#define SMBHSTADD 4 -#define SMBHSTDAT0 5 -#define SMBHSTDAT1 6 -#define SMBBLKDAT 7 - -void smbus_enable(void) -{ - /* iobase addr */ - pcibios_write_config_dword(PM_BUS, PM_DEVFN, 0x90, SMBUS_IO_BASE | 1); - /* smbus enable */ - pcibios_write_config_byte(PM_BUS, PM_DEVFN, 0xd2, (0x4 << 1) | 1); - /* iospace enable */ - pcibios_write_config_word(PM_BUS, PM_DEVFN, 0x4, 1); -} - -void smbus_setup(void) -{ - outb(0, SMBUS_IO_BASE + SMBHSTSTAT); -} - -static void smbus_wait_until_ready(void) -{ - while((inb(SMBUS_IO_BASE + SMBHSTSTAT) & 1) == 1) { - /* nop */ - } -} - -static void smbus_wait_until_done(void) -{ - unsigned char byte; - do { - byte = inb(SMBUS_IO_BASE + SMBHSTSTAT); - }while((byte &1) == 1); - while( (byte & ~1) == 0) { - byte = inb(SMBUS_IO_BASE + SMBHSTSTAT); - } -} - -int smbus_read_byte(unsigned device, unsigned address) -{ - unsigned char host_status_register; - unsigned char byte; - int result; - - smbus_wait_until_ready(); - - /* setup transaction */ - /* disable interrupts */ - outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL); - /* set the device I'm talking to */ - outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADD); - /* set the command/address... */ - outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD); - /* set up for a byte data read */ - outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x2 << 2), SMBUS_IO_BASE + SMBHSTCTL); - - /* clear any lingering errors, so the transaction will run */ - outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); - - /* clear the data byte...*/ - outb(0, SMBUS_IO_BASE + SMBHSTDAT0); - - /* start the command */ - outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40), SMBUS_IO_BASE + SMBHSTCTL); - - /* poll for transaction completion */ - smbus_wait_until_done(); - - host_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT); - - /* read results of transaction */ - byte = inb(SMBUS_IO_BASE + SMBHSTDAT0); - - result = byte; - if (host_status_register != 0x02) { - result = -1; - } - return result; -} - -#define I440GX_BUS 0 -#define I440GX_DEVFN ((0x00 << 3) + 0) - -#define USE_ECC 0 - -#define CAS_LATENCY 3 - - /* CAS latency 2 */ -#if (CAS_LATENCY == 2) -#define CAS_NB 0x17 - /* - * 7 == 0111 - * 1 == 0001 - */ -#define CAS_MODE 0x2a - /* - * a == 1010 - * 2 == 0010 - */ -#endif - - /* CAS latency 3 */ -#if (CAS_LATENCY == 3) -#define CAS_NB 0x13 - /* - * 3 == 0011 - * 1 == 0001 - */ -#define CAS_MODE 0x3a - /* - * a == 1010 - * 3 == 0011 - */ -#endif - -#ifndef CAS_NB -#error "Nothing defined" -#endif - -/* Default values for config registers */ - -static void set_nbxcfg(void) -{ - /* NBXCFG 0x50 - 0x53 */ - /* f == 1111 - * 0 == 0000 - * 0 == 0000 - * 0 == 0000 - * 0 == 0000 - * 1 == 0001 - * 8 == 1000 - * c == 1100 - * SDRAM Row without ECC: - * row 0 == 1 No ECC - * row 1 == 1 No ECC - * row 2 == 1 No ECC - * row 3 == 1 No ECC - * row 4 == 1 No ECC - * row 5 == 1 No ECC - * row 6 == 1 No ECC - * row 7 == 1 No ECC - * Host Bus Fast Data Ready Enable == 0 Disabled - * IDSEL_REDIRECT == 0 (430TX compatibility disable?) - * WSC# Hanshake Disable == 0 enable (Use External IOAPIC) - * Host/DRAM Frequence == 00 100Mhz - * AGP to PCI Access Enable == 0 Disable - * PCI Agent to Aperture Access Disable == 0 Enable (Ignored) - * Aperture Access Global Enable == 0 Disable - * DRAM Data Integrity Mode == 11 (Error Checking/Correction) - * ECC Diagnostic Mode Enable == 0 Not Enabled - * MDA present == 0 Not Present - * USWC Write Post During During I/O Bridge Access Enable == 1 Enabled - * In Order Queue Depth (IQD) (RO) == ?? - */ - pcibios_write_config_dword(I440GX_BUS, I440GX_DEVFN, 0x50, 0xff00000c); -} - -static void set_dramc(void) -{ - /* 0 == 0000 - * 8 == 1000 - * Not registered SDRAM - * refresh disabled - */ - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x57, 0x8); -} - -static void set_pam(void) -{ - /* PAM - Programmable Attribute Map Registers */ - /* Ideally we want to enable all of these as DRAM and teach - * linux it is o.k. to use them... - */ - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x59, 0x00); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x5a, 0x00); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x5b, 0x00); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x5d, 0x00); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x5e, 0x00); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x5f, 0x00); -} - -static void set_drb(void) -{ - /* DRB - DRAM Row Boundary Registers */ - /* Conservative setting 8MB of ram on first DIMM... */ - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x60, 0x01); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x61, 0x01); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x62, 0x01); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x63, 0x01); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x64, 0x01); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x65, 0x01); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x66, 0x01); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x67, 0x01); -} - -static void set_fdhc(void) -{ - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x68, 0x00); -} -static void set_mbsc(void) -{ - /* MBSC - Memory Buffer Strength Control */ - /* 00c00003e820 - * [47:44] 0 == 0000 - * [43:40] 0 == 0000 - * [39:36] c == 1100 - * [35:32] 0 == 0000 - * [31:28] 0 == 0000 - * [27:24] 0 == 0000 - * [23:20] 0 == 0000 - * [19:16] 3 == 0011 - * [15:12] e == 1110 - * [11: 8] 8 == 1000 - * [ 7: 4] 2 == 0010 - * [ 3: 0] 0 == 0000 - * MAA[14:0]#, WEA#, SRASA#, SCASA# Buffer Strengths == 3x - * MAB[14,13,10,12:11,9:0]#, WEB#, SRASB#, SCASB# Buffer Strengths == 3x - * MD[63:0]# Buffer Strength Control 2 == 3x - * MD[63:0]# Buffer Strength Control 1 == 3x - * MECC[7:0] Buffer Strength Control 2 == 3x - * MECC[7:0] Buffer Strength Control 1 == 3x - * CSB7# Buffer Strength == 3x - * CSA7# Buffer Strength == 3x - * CSB6# Buffer Strength == 3x - * CSA6# Buffer Strength == 3x - * CSA5#/CSB5# Buffer Strength == 2x - * CSA4#/CSB4# Buffer Strength == 2x - * CSA3#/CSB3# Buffer Strength == 2x - * CSA2#/CSB2# Buffer Strength == 2x - * CSA1#/CSB1# Buffer Strength == 2x - * CSA0#/CSB0# Buffer Strength == 2x - * DQMA5 Buffer Strength == 2x - * DQMA1 Buffer Strength == 3x - * DQMB5 Buffer Strength == 2x - * DQMB1 Buffer Strength == 2x - * DQMA[7:6,4:2,0] Buffer Strength == 3x - * GCKE Buffer Strength == 1x - * FENA Buffer Strength == 3x - */ - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x69, 0xB3); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x6a, 0xee); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x6b, 0xff); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x6c, 0xff); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x6d, 0xff); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x6e, 0x03); -} - -static void set_smram(void) -{ - /* 0x72 SMRAM */ - /* 1 == 0001 - * a == 1010 - * SMM Compatible base segment == 010 (Hardcoded value) - */ -} - -static void set_esramc(void) -{ - /* 0x73 ESMRAMC */ -} - -static void set_rps(void) -{ - /* RPS - Row Page Size Register */ - /* 0x0055 - * [15:12] 0 == 0000 - * [11: 8] 0 == 0000 - * [ 7: 4] 5 == 0101 - * [ 3: 0] 5 == 0101 - * DRB[0] == 4KB - * DRB[1] == 4KB - * DRB[2] == 4KB - * DRB[3] == 4KB - * DRB[4] == 2KB - * DRB[5] == 2KB - * DRB[6] == 2KB - * DRB[7] == 2KB - */ - pcibios_write_config_word(I440GX_BUS, I440GX_DEVFN, 0x74, 0x5555); -} - -static void set_sdramc(void) -{ - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76, CAS_NB); -} - -static void set_pgpol(void) -{ - /* PGPOL - Paging Policy Register */ - /* 0xff07 - * [15:12] f == 1111 - * [11: 8] f == 1111 - * [ 7: 4] 0 == 0000 - * [ 3: 0] 7 == 0111 - * row0 == 4banks - * row1 == 4banks - * row2 == 4banks - * row3 == 4banks - * row4 == 4banks - * row5 == 4banks - * row6 == 4banks - * row7 == 4banks - * Dram Idle Timer (DIT) == 32 clocks - */ - pcibios_write_config_word(I440GX_BUS, I440GX_DEVFN, 0x78, 0xff07); -} - -static void set_mbfs(void) -{ - /* MBFS - Memory Buffer Frequencey Select Register */ - /* 0xffff7f - * [23:20] f == 1111 - * [19:16] f == 1111 - * [15:12] f == 1111 - * [11: 8] f == 1111 - * [ 7: 4] 7 == 0111 - * [ 3: 0] f == 1111 - * MAA[14:0], WEA#, SRASA#, SCASA# == 100Mhz Buffers Enabled - * MAB[14,13,10,12:11,9:0], WEB#, SRASB#, SCASB# == 100Mhz Buffers Enabled - * MD[63:0] Control 2 == 100 Mhz Buffer Enable - * MD[63:0] Control 1 == 100 Mhz B - * MECC[7:0] Control 2 == 100 Mhz B - * - */ - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xca, 0xff); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xcb, 0xff); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xcc, 0x7f); -} - -static void set_dwtc(void) -{ - /* DWTC - DRAM Write Thermal Throttle Control */ - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe0, 0xb4); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe1, 0xbe); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe2, 0xff); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe3, 0xd7); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe4, 0x97); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe5, 0x3e); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe6, 0x00); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe7, 0x80); -} - -static void set_drtc(void) -{ - /* DRTC - DRAM Read Thermal Throttle Control */ - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe8, 0x2c); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xe9, 0xd3); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xea, 0xf7); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xeb, 0xcf); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xec, 0x9d); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xed, 0x3e); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xee, 0x00); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xef, 0x00); -} - -static void set_pmcr(void) -{ - /* PMCR -- BIOS sets 0x90 into it. - * 0x10 is REQUIRED. - * we have never used it. So why did this ever work? - */ - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x7a, 0x90); - -} -void sdram_set_registers(void) -{ - set_nbxcfg(); - set_dramc(); - set_pam(); - set_drb(); - set_fdhc(); - set_mbsc(); - set_smram(); - set_esramc(); - set_rps(); - set_sdramc(); - set_pgpol(); - set_mbfs(); - set_dwtc(); - set_drtc(); - set_pmcr(); -} - -int log2(int value) -{ - /* __builtin_bsr is a exactly equivalent to the x86 machine - * instruction with the exception that it returns -1 - * when the value presented to it is zero. - * Otherwise __builtin_bsr returns the zero based index of - * the highest bit set. - */ - return __builtin_bsr(value); -} - - -static void spd_set_drb(void) -{ - /* - * Effects: Uses serial presence detect to set the - * DRB registers which holds the ending memory address assigned - * to each DIMM. - */ - unsigned end_of_memory; - unsigned device; - unsigned drb_reg; - - end_of_memory = 0; /* in multiples of 8MiB */ - device = SMBUS_MEM_DEVICE_START; - drb_reg = 0x60; - while (device <= SMBUS_MEM_DEVICE_END) { - unsigned side1_bits, side2_bits; - int byte, byte2; - - side1_bits = side2_bits = -1; - - /* rows */ - byte = smbus_read_byte(device, 3); - if (byte >= 0) { - side1_bits += byte & 0xf; - - /* columns */ - byte = smbus_read_byte(device, 4); - side1_bits += byte & 0xf; - - /* banks */ - byte = smbus_read_byte(device, 17); - side1_bits += log2(byte); - - /* Get the moduel data width and convert it to a power of two */ - /* low byte */ - byte = smbus_read_byte(device, 6); - - /* high byte */ - byte2 = smbus_read_byte(device, 7); -#if HAVE_CAST_SUPPORT - side1_bits += log2((((unsigned long)byte2 << 8)| byte)); -#else - side1_bits += log2((byte2 << 8) | byte); -#endif - - /* now I have the ram size in bits as a power of two (less 1) */ - /* Make it mulitples of 8MB */ - side1_bits -= 25; - - /* side two */ - - /* number of physical banks */ - byte = smbus_read_byte(device, 5); - if (byte > 1) { - /* for now only handle the symmetrical case */ - side2_bits = side1_bits; - } - } - - /* Compute the end address for the DRB register */ - /* Only process dimms < 2GB (2^8 * 8MB) */ - if (side1_bits < 8) { - end_of_memory += (1 << side1_bits); - } -#if HAVE_STRING_SUPPORT - print_debug("end_of_memory: "); print_debug_hex32(end_of_memory); print_debug("\n"); -#endif - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, drb_reg, end_of_memory); - - if (side2_bits < 8 ) { - end_of_memory += (1 << side2_bits); - } -#if HAVE_STRING_SUPPORT - print_debug("end_of_memory: "); print_debug_hex32(end_of_memory); print_debug("\n"); -#endif - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, drb_reg +1, end_of_memory); - - drb_reg += 2; - device += SMBUS_MEM_DEVICE_INC; - } -} - -void sdram_no_memory(void) -{ -#if HAVE_STRING_SUPPORT - print_err("No memory!!\n"); -#endif - while(1) ; -} - -static void spd_set_dramc(void) -{ - /* - * Effects: Uses serial presence detect to set the - * DRAMC register, which records if ram is registered or not, - * and controls the refresh rate. - * The refresh rate is not set here, as memory refresh - * cannot be enbaled until after memory is initialized. - * see spd_enable_refresh. - */ - /* auto detect if ram is registered or not. */ - /* The DRAMC register also contorls the refresh rate but we can't - * set that here because we must leave refresh disabled. - * see: spd_enable_refresh - */ - /* Find the first dimm and assume the rest are the same */ - /* FIXME Check for illegal/unsupported ram configurations and abort */ - unsigned device; - int byte; - unsigned dramc; - byte = -1; - device = SMBUS_MEM_DEVICE_START; - - while ((byte < 0) && (device <= SMBUS_MEM_DEVICE_END)) { - byte = smbus_read_byte(device, 21); - device += SMBUS_MEM_DEVICE_INC; - } - if (byte < 0) { - /* We couldn't find anything we must have no memory */ - sdram_no_memory(); - } - dramc = 0x8; - if ((byte & 0x12) != 0) { - /* this is a registered part. - * observation: for register parts, BIOS zeros (!) - * registers CA-CC. This has an undocumented meaning. - */ - /* But it does make sense the oppisite of registered - * sdram is buffered and 0xca - 0xcc control the buffers. - * Clearing them aparently disables them. - */ - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xca, 0); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xcb, 0); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0xcc, 0); - dramc = 0x10; - } - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x57, dramc); -} - -static void spd_enable_refresh(void) -{ - /* - * Effects: Uses serial presence detect to set the - * refresh rate in the DRAMC register. - * see spd_set_dramc for the other values. - * FIXME: Check for illegal/unsupported ram configurations and abort - */ -#if HAVE_STATIC_ARRAY_SUPPORT - static const unsigned char refresh_rates[] = { - 0x01, /* Normal 15.625 us -> 15.6 us */ - 0x05, /* Reduced(.25X) 3.9 us -> 7.8 us */ - 0x05, /* Reduced(.5X) 7.8 us -> 7.8 us */ - 0x02, /* Extended(2x) 31.3 us -> 31.2 us */ - 0x03, /* Extended(4x) 62.5 us -> 62.4 us */ - 0x04, /* Extended(8x) 125 us -> 124.8 us */ - }; -#endif - /* Find the first dimm and assume the rest are the same */ - int status; - int byte; - unsigned device; - unsigned refresh_rate; - byte = -1; - status = -1; - device = SMBUS_MEM_DEVICE_START; - while ((byte < 0) && (device <= SMBUS_MEM_DEVICE_END)) { - byte = smbus_read_byte(device, 12); - device += SMBUS_MEM_DEVICE_INC; - } - if (byte < 0) { - /* We couldn't find anything we must have no memory */ - sdram_no_memory(); - } - byte &= 0x7f; - /* Default refresh rate be conservative */ - refresh_rate = 5; - /* see if the ram refresh is a supported one */ - if (byte < 6) { -#if HAVE_STATIC_ARRAY_SUPPORT - refresh_rate = refresh_rates[byte]; -#endif - } - byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x57); - byte &= 0xf8; - byte |= refresh_rate; - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x57, byte); -} - -static void spd_set_sdramc(void) -{ - return; -} - -static void spd_set_rps(void) -{ - /* - * Effects: Uses serial presence detect to set the row size - * on a given DIMM - * FIXME: Check for illegal/unsupported ram configurations and abort - */ - /* The RPS register holds the size of a ``page'' of DRAM on each DIMM */ - unsigned page_sizes; - unsigned index; - unsigned device; - unsigned char dramc; - /* default all page sizes to 2KB */ - page_sizes = 0; - index = 0; - device = SMBUS_MEM_DEVICE_START; - for(; device <= SMBUS_MEM_DEVICE_END; index += 4, device += SMBUS_MEM_DEVICE_INC) { - unsigned int status; - unsigned int byte; - int page_size; - - byte = smbus_read_byte(device, 3); - if (byte < 0) continue; - - /* I now have the row page size as a power of 2 */ - page_size = byte & 0xf; - /* make it in multiples of 2Kb */ - page_size -= 11; - - if (page_size <= 0) continue; - - /* FIXME: do something with page sizes greather than 8KB!! */ - page_sizes |= (page_size << index); - - /* side two */ - byte = smbus_read_byte(device, 5); - if (byte <= 1) continue; - - /* For now only handle the symmetrical case */ - page_sizes |= (page_size << (index +2)); - } - /* next block is for Ron's attempt to get registered to work. */ - /* we have just verified that we have to have this code. It appears that - * the registered SDRAMs do indeed set the RPS wrong. sheesh. - */ - /* at this point, page_sizes holds the RPS for all ram. - * we have verified that for registered DRAM the values are - * 1/2 the size they should be. So we test for registered - * and then double the sizes if needed. - */ - - dramc = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x57); - if (dramc & 0x10) { - /* registered */ - - /* BIOS makes weird page size for registered! */ - /* what we have found is you need to set the EVEN banks to - * twice the size. Fortunately there is a very easy way to - * do this. First, read the WORD value of register 0x74. - */ - page_sizes += 0x1111; - } - - pcibios_write_config_word(I440GX_BUS, I440GX_DEVFN, 0x74, page_sizes); -} - -static void spd_set_pgpol(void) -{ - /* - * Effects: Uses serial presence detect to set the number of banks - * on a given DIMM - * FIXME: Check for illegal/unsupported ram configurations and abort - */ - /* The PGPOL register stores the number of logical banks per DIMM, - * and number of clocks the DRAM controller waits in the idle - * state. - */ - unsigned device; - unsigned bank_sizes; - unsigned bank; - unsigned reg; - /* default all bank counts 2 */ - bank_sizes = 0; - bank = 0; - device = SMBUS_MEM_DEVICE_START; - for(; device <= SMBUS_MEM_DEVICE_END; - bank += 2, device += SMBUS_MEM_DEVICE_INC) { - int byte; - - /* logical banks */ - byte = smbus_read_byte(device, 17); - if (byte < 0) continue; - if (byte < 4) continue; - bank_sizes |= (1 << bank); - - /* side 2 */ - /* Number of physical banks */ - byte = smbus_read_byte(device, 5); - if (byte <= 1) continue; - /* for now only handle the symmetrical case */ - bank_sizes |= (1 << (bank +1)); - } - reg = bank_sizes << 8; - reg |= 0x7; /* 32 clocks idle time */ - pcibios_write_config_word(I440GX_BUS, I440GX_DEVFN, 0x78, reg); -} - -static void spd_set_nbxcfg(void) -{ - /* - * Effects: Uses serial presence detect to set the - * ECC support flags in the NBXCFG register - * FIXME: Check for illegal/unsupported ram configurations and abort - */ - unsigned reg; - unsigned index; - unsigned device; - - /* Say all dimms have no ECC support */ - reg = 0xff; - index = 0; - - device = SMBUS_MEM_DEVICE_START; - for(; device <= SMBUS_MEM_DEVICE_END; index += 2, device += SMBUS_MEM_DEVICE_INC) { - int byte; - - byte = smbus_read_byte(device, 11); - if (byte < 0) continue; -#if !USE_ECC - byte = 0; /* Disable ECC */ -#endif - /* 0 == None, 1 == Parity, 2 == ECC */ - if (byte != 2) continue; - reg ^= (1 << index); - - /* side two */ - /* number of physical banks */ - byte = smbus_read_byte(device, 5); - if (byte <= 1) continue; - /* There is only the symmetrical case */ - reg ^= (1 << (index +1)); - } - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x53, reg); - /* Now see if reg is 0xff. If it is we are done. If not, - * we need to set 0x18 into register 0x50.l - * we will do this in two steps, first or in 0x80 to 0x50.b, - * then or in 0x1 to 0x51.b - */ -#if HAVE_STRING_SUPPORT - print_debug("spd_set_nbxcfg reg="); print_debug_hex8(reg); print_debug("\n"); -#endif - if (reg != 0xff) { - unsigned char byte; - byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x50); - byte |= 0x80; - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x50, byte); - byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x51); - byte |= 1; - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x51, byte); - /* try this. - * We should be setting bit 2 in register 76 and we're not - * technically we should see if CL=2 for the ram, - * but registered is so screwed up that it's kind of a lost - * cause. - */ - byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76); - byte |= 4; - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76, byte); -#if HAVE_STRING_SUPPORT - print_debug("spd_set_nbxcfg 0x76.b="); print_debug_hex8(byte); print_debug("\n"); -#endif - } -} - -void sdram_set_spd_registers(void) -{ - spd_set_drb(); - spd_set_dramc(); - spd_set_rps(); - spd_set_sdramc(); - spd_set_pgpol(); - spd_set_nbxcfg(); -} - -void sdram_first_normal_reference(void) -{ - return; -} - -void sdram_special_finishup(void) -{ - return; -} - -static void set_ram_command(unsigned command) -{ - unsigned char byte; - command &= 0x7; - byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76); - byte &= 0x1f; - byte |= (command << 5); - pcibios_write_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76, byte); -#if HAVE_STRING_SUPPORT - print_debug("set_ram_command 0x76.b="); print_debug_hex8(byte); print_debug("\n"); -#endif -} - -#define RAM_COMMAND_NONE 0x0 -#define RAM_COMMAND_NOOP 0x1 -#define RAM_COMMAND_PRECHARGE 0x2 -#define RAM_COMMAND_MRS 0x3 -#define RAM_COMMAND_CBR 0x4 - -void sdram_set_command_none(void) -{ - set_ram_command(RAM_COMMAND_NONE); -} -void sdram_set_command_noop(void) -{ - set_ram_command(RAM_COMMAND_NOOP); -} -void sdram_set_command_precharge(void) -{ - set_ram_command(RAM_COMMAND_PRECHARGE); -} - -static unsigned long dimm_base(int n) -{ - unsigned char byte; - unsigned long result; - if (n == 0) { - return 0; - } - - byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x60 + (n - 1)); - result = byte; - result <<= 23; - return result; -} - -static void dimms_read(unsigned long offset) -{ - int i; - for(i = 0; i < 8; i++) { - unsigned long dummy; - unsigned long addr; - unsigned long next_base; - - next_base = dimm_base(i +1); - addr = dimm_base(i); - if (addr == next_base) { - continue; - } - addr += offset; -#if HAVE_STRING_SUPPORT - print_debug("Reading "); - print_debug_hex32(addr); - print_debug("\n"); -#endif -#if HAVE_POINTER_SUPPORT -#if HAVE_MACRO_ARG_SUPPORT - dummy = RAM(unsigned long, addr); -#else - dummy = *((volatile unsigned long *)(addr)); -#endif -#endif -#if HAVE_STRING_SUPPORT - print_debug("Reading "); - print_debug_hex32(addr ^ 0xddf8); - print_debug("\n"); -#endif -#if HAVE_POINTER_SUPPORT -#if HAVE_MACRO_ARG_SUPPORT - dummy = RAM(unsigned long, addr ^ 0xdff8); -#else - dummy = *((volatile unsigned long *)(addr ^ 0xdff8)); -#endif -#endif -#if HAVE_STRING_SUPPORT - print_debug("Read "); - print_debug_hex32(addr); - print_debug_hex32(addr ^ 0xddf8); - print_debug("\n"); -#endif - } -} - -void sdram_set_command_cbr(void) -{ - set_ram_command(RAM_COMMAND_CBR); -} - -void sdram_assert_command(void) -{ - dimms_read(0x400); -} - -void sdram_set_mode_register(void) -{ - unsigned char byte; - unsigned cas_mode; - set_ram_command(RAM_COMMAND_MRS); - byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x76); - cas_mode = byte & 0x4; - cas_mode ^= 4; - cas_mode <<= 2; - cas_mode |= 0x2a; - cas_mode <<= 3; - dimms_read(cas_mode); -} - -void sdram_enable_refresh(void) -{ - spd_enable_refresh(); -} - - -unsigned long sdram_get_ecc_size_bytes(void) -{ - unsigned char byte; - unsigned long size; - /* FIXME handle the no ram case. */ - /* Read the RAM SIZE */ - byte = pcibios_read_config_byte(I440GX_BUS, I440GX_DEVFN, 0x67); - /* Convert it to bytes */ - size = byte; - size <<= 23; -#if !USE_ECC - size = 0; -#endif - return size; -} - -/* Dummy udelay code acting as a place holder... */ -void udelay(int count) -{ - int i; - i = 5; -} - -void sdram_enable(void) -{ -#if HAVE_STRING_SUPPORT - print_debug("Ram Enable 1\n"); -#endif - - /* noop command */ - sdram_set_command_noop(); - udelay(200); - sdram_assert_command(); - - /* Precharge all */ - sdram_set_command_precharge(); - sdram_assert_command(); - - /* wait until the all banks idle state... */ -#if HAVE_STRING_SUPPORT - print_debug("Ram Enable 2\n"); -#endif - - /* Now we need 8 AUTO REFRESH / CBR cycles to be performed */ - - sdram_set_command_cbr(); - sdram_assert_command(); - sdram_assert_command(); - sdram_assert_command(); - sdram_assert_command(); - sdram_assert_command(); - sdram_assert_command(); - sdram_assert_command(); - sdram_assert_command(); - -#if HAVE_STRING_SUPPORT - print_debug("Ram Enable 3\n"); -#endif - - /* mode register set */ - sdram_set_mode_register(); - /* MAx[14:0] lines, - * MAx[2:0 ] 010 == burst mode of 4 - * MAx[3:3 ] 1 == interleave wrap type - * MAx[4:4 ] == CAS# latency bit - * MAx[6:5 ] == 01 - * MAx[12:7] == 0 - */ - -#if HAVE_STRING_SUPPORT - print_debug("Ram Enable 4\n"); -#endif - - /* normal operation */ - sdram_set_command_none(); - -#if HAVE_STRING_SUPPORT - print_debug("Ram Enable 5\n"); -#endif -} - -/* Setup SDRAM */ -void sdram_initialize(void) -{ -#if HAVE_STRING_SUPPORT - print_debug("Ram1\n"); -#endif - /* Set the registers we can set once to reasonable values */ - sdram_set_registers(); - -#if HAVE_STRING_SUPPORT - print_debug("Ram2\n"); -#endif - /* Now setup those things we can auto detect */ - sdram_set_spd_registers(); - -#if HAVE_STRING_SUPPORT - print_debug("Ram3\n"); -#endif - /* Now that everything is setup enable the SDRAM. - * Some chipsets do the work for use while on others - * we need to it by hand. - */ - sdram_enable(); - -#if HAVE_STRING_SUPPORT - print_debug("Ram4\n"); -#endif - sdram_first_normal_reference(); - -#if HAVE_STRING_SUPPORT - print_debug("Ram5\n"); -#endif - sdram_enable_refresh(); - sdram_special_finishup(); - -#if HAVE_STRING_SUPPORT - print_debug("Ram6\n"); -#endif -} |