diff options
author | Eric Biederman <ebiederm@xmission.com> | 2004-05-28 14:11:54 +0000 |
---|---|---|
committer | Eric Biederman <ebiederm@xmission.com> | 2004-05-28 14:11:54 +0000 |
commit | 90089603393a1a67b9a4afe1f2b7237a74e1b21b (patch) | |
tree | 30a036a2a3e52bf00a57257b043872906ee5eb68 /util/romcc/tests/simple_test1.c | |
parent | 7664d1cb87876a3b7e622cf1c7e40f1fb7988c9f (diff) | |
download | coreboot-90089603393a1a67b9a4afe1f2b7237a74e1b21b.tar.xz |
- Upgrade to romcc version 0.63
This includes more test cases
Lots of small bug fixes
A built in C preprocessor
Initial support for not inlining everything
__attribute__((noinline)) works
Better command line options and help
Constants arrays can be read at compile time
Asm statements that are not volatile will now be removed when their outputs go unused
Loads and stores that are not volatile will be removed when their values go unused
The number of FIXMES in the code is finally starting to go down.
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1582 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'util/romcc/tests/simple_test1.c')
-rw-r--r-- | util/romcc/tests/simple_test1.c | 252 |
1 files changed, 252 insertions, 0 deletions
diff --git a/util/romcc/tests/simple_test1.c b/util/romcc/tests/simple_test1.c new file mode 100644 index 0000000000..feacbfdc38 --- /dev/null +++ b/util/romcc/tests/simple_test1.c @@ -0,0 +1,252 @@ +void land_test(void) +{ + int i; + i = 1 && 2; +} +void lor_test(void) +{ + int i; + i = 1 || 2; +} + +void outb(unsigned char value, unsigned short port) +{ + __builtin_outb(value, port); +} + +unsigned char inb(unsigned short port) +{ + return __builtin_inb(port); +} + +static unsigned int config_cmd2(unsigned char bus, unsigned devfn, unsigned where) +{ + return 0x80000000 | (bus << 16) | (devfn << 8) | (where & ~3) ; +} + +/* Base Address */ +#ifndef TTYS0_BASE +#define TTYS0_BASE 0x3f8 +#endif + +#ifndef TTYS0_BAUD +#define TTYS0_BAUD 115200 +#endif + +#if ((115200%TTYS0_BAUD) != 0) +#error Bad ttys0 baud rate +#endif + +#define TTYS0_DIV (115200/TTYS0_BAUD) + +/* Line Control Settings */ +#ifndef TTYS0_LCS +/* Set 8bit, 1 stop bit, no parity */ +#define TTYS0_LCS 0x3 +#endif + +#define UART_LCS TTYS0_LCS + +/* Data */ +#define UART_RBR 0x00 +#define UART_TBR 0x00 + +/* Control */ +#define UART_IER 0x01 +#define UART_IIR 0x02 +#define UART_FCR 0x02 +#define UART_LCR 0x03 +#define UART_MCR 0x04 +#define UART_DLL 0x00 +#define UART_DLM 0x01 + +/* Status */ +#define UART_LSR 0x05 +#define UART_MSR 0x06 +#define UART_SCR 0x07 + +int uart_can_tx_byte(void) +{ + return inb(TTYS0_BASE + UART_LSR) & 0x20; +} + +void uart_wait_to_tx_byte(void) +{ + while(!uart_can_tx_byte()) + ; +} + +void uart_wait_until_sent(void) +{ + while(!(inb(TTYS0_BASE + UART_LSR) & 0x40)) + ; +} + +void uart_tx_byte(unsigned char data) +{ + uart_wait_to_tx_byte(); + outb(data, TTYS0_BASE + UART_TBR); + /* Make certain the data clears the fifos */ + uart_wait_until_sent(); +} + +void dummy(void) +{ + uart_tx_byte(5); +} + +#define PIIX4_DEVFN 0x90 +#define SMBUS_MEM_DEVICE_START 0x50 +#define SMBUS_MEM_DEVICE_END 0x53 +#define SMBUS_MEM_DEVICE_INC 1 + + +#define PM_BUS 0 +#define PM_DEVFN (PIIX4_DEVFN+3) + +#define SMBUS_IO_BASE 0x1000 +#define SMBHSTSTAT 0 +#define SMBHSTCTL 2 +#define SMBHSTCMD 3 +#define SMBHSTADD 4 +#define SMBHSTDAT0 5 +#define SMBHSTDAT1 6 +#define SMBBLKDAT 7 + +static void smbus_wait_until_done(void) +{ + unsigned char byte; + do { + byte = inb(SMBUS_IO_BASE + SMBHSTSTAT); + }while((byte &1) == 1); +#if 1 + while( (byte & ~1) == 0) { + byte = inb(SMBUS_IO_BASE + SMBHSTSTAT); + } +#endif +} + +#if 0 +void ifthenelse(void) +{ + int i; + if (5 > 2) { + i = 1; + } + else { + i = 2; + } + i = i + 3; +} +#endif +#if 0 +static int add(int left, int right) +{ + { + return left + right; + } +} +#else +#if 0 +static int add(int left, int right) +{ + return left + right; +} +#endif +#endif + +#if 0 +static void assign(void) +{ + int i, j; + i = j = 1; +} +#endif + +#if 0 +static void and(void) +{ + int i, j, k; + i = 1; + j = 2; + k = i && j; + +} +static void and_test(void) +{ + and(); +} +#endif +#if 0 +#define INC_TEST 2 +static void inc(void) +{ + int i; + i = 5; +#if (INC_TEST == 1) + i += 7; +#endif +#if (INC_TEST == 2) + ++i; +#endif +#if (INC_TEST == 3) + i++; +#endif +} + +#if 0 +static void inc_test(void) +{ + inc(); +} +#endif +#endif +#if 0 +static void loop(void) +{ + int i; + for(i = 0; i < 10; i++) { + ; + } while(i < 10); +} + +static void loop_test(void) +{ + loop(); +} +#endif + +#if 0 +static void simple(void) +{ + add(1,2); +} +#endif + +#if 0 +static void fun(void) +{ + int bar; + bar = add(1, 2); +} +#endif + + +#if 0 +static void func(void) +{ + int bar, baz; + int i; + + baz = add(1, 2); + baz = add(1, 2); + bar = 1; + baz = 2; + for(i = 0; i < 10; i = i + 1) { + baz = i; + } + bar = 1 + 2 * 3; + bar = add(3, 4); + bar = add(bar, baz); +} +#endif |