Make the output of getpir look a bit less crappy (trivial).

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2612 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 8 insertions, 5 deletions

diff --git a/util/getpir/code_gen.c b/util/getpir/code_gen.c
index a458eae27a..6d9a7e4c95 100644
--- a/util/getpir/code_gen.c
+++ b/util/getpir/code_gen.c
@@ -3,10 +3,13 @@
 #include "pirq_routing.h"
 
 static char *preamble[] = {
-	"/* This file was generated by getpir.c, do not modify! \n   (but if you do, please run checkpir on it to verify)\n",
-	" * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up\n",
+	"/* This file was generated by getpir.c, do not modify!\n",
+	" * (but if you do, please run checkpir on it to verify)\n",
 	" *\n",
-	" * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM\n*/\n\n",
+	" * Contains the IRQ Routing Table dumped directly from your\n",
+	" * memory, which BIOS sets up.\n",
+	" *\n",
+	" * Documentation at: http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM\n */\n\n",
 	"#ifdef GETPIR\n",
 	"#include \"pirq_routing.h\"\n",
 	"#else\n"
@@ -33,7 +36,7 @@ void code_gen(char *filename, struct irq_routing_table *rt)
 	while (*code)
 		fprintf(fpir, "%s", *code++);
 
-	fprintf(fpir, "\t32+16*%d,	 /* there can be total %d devices on the bus */\n",
+	fprintf(fpir, "\t32+16*%d,	 /* There can be total %d devices on the bus */\n",
 		ts, ts);
 	fprintf(fpir, "\t0x%02x,		 /* Where the interrupt router lies (bus) */\n",
 		rt->rtr_bus);
@@ -46,7 +49,7 @@ void code_gen(char *filename, struct irq_routing_table *rt)
 	fprintf(fpir, "\t%#x,		 /* Crap (miniport) */\n",
 		rt->miniport_data);
 	fprintf(fpir, "\t{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */\n");
-	fprintf(fpir, "\t%#x,         /*  u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */\n",
+	fprintf(fpir, "\t%#x,		 /* u8 checksum. This has to be set to some\n			    value that would give 0 after the sum of all\n			    bytes for this structure (including checksum) */\n",
 		rt->checksum);
 	fprintf(fpir, "\t{\n");
 	fprintf(fpir, "\t\t/* bus,     dev|fn,   {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap},  slot, rfu */\n");