summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/cpu/x86/smm/smmrelocate.S2
-rw-r--r--src/mainboard/iwave/Kconfig17
-rw-r--r--src/mainboard/iwave/Kconfig.name2
-rw-r--r--src/mainboard/iwave/iWRainbowG6/Kconfig33
-rw-r--r--src/mainboard/iwave/iWRainbowG6/Kconfig.name2
-rw-r--r--src/mainboard/iwave/iWRainbowG6/Makefile.inc1
-rw-r--r--src/mainboard/iwave/iWRainbowG6/acpi/cpu.asl45
-rw-r--r--src/mainboard/iwave/iWRainbowG6/acpi/ec.asl52
-rw-r--r--src/mainboard/iwave/iWRainbowG6/acpi/northbridge_pci_irqs.asl81
-rw-r--r--src/mainboard/iwave/iWRainbowG6/acpi/platform.asl87
-rw-r--r--src/mainboard/iwave/iWRainbowG6/acpi/sleepstates.asl21
-rw-r--r--src/mainboard/iwave/iWRainbowG6/acpi/southbridge_pci_irqs.asl98
-rw-r--r--src/mainboard/iwave/iWRainbowG6/acpi/superio.asl42
-rw-r--r--src/mainboard/iwave/iWRainbowG6/acpi/thermal.asl90
-rw-r--r--src/mainboard/iwave/iWRainbowG6/acpi_tables.c58
-rw-r--r--src/mainboard/iwave/iWRainbowG6/board_info.txt3
-rw-r--r--src/mainboard/iwave/iWRainbowG6/cmos.layout111
-rw-r--r--src/mainboard/iwave/iWRainbowG6/cstates.c7
-rw-r--r--src/mainboard/iwave/iWRainbowG6/devicetree.cb40
-rw-r--r--src/mainboard/iwave/iWRainbowG6/dsdt.asl45
-rw-r--r--src/mainboard/iwave/iWRainbowG6/fadt.c151
-rw-r--r--src/mainboard/iwave/iWRainbowG6/hda_verb.c93
-rw-r--r--src/mainboard/iwave/iWRainbowG6/irq_tables.c51
-rw-r--r--src/mainboard/iwave/iWRainbowG6/mptable.c101
-rw-r--r--src/mainboard/iwave/iWRainbowG6/romstage.c379
-rw-r--r--src/soc/intel/sch/Kconfig59
-rw-r--r--src/soc/intel/sch/Makefile.inc48
-rw-r--r--src/soc/intel/sch/acpi.c72
-rw-r--r--src/soc/intel/sch/acpi/ac97.asl33
-rw-r--r--src/soc/intel/sch/acpi/audio.asl30
-rw-r--r--src/soc/intel/sch/acpi/globalnvs.asl156
-rw-r--r--src/soc/intel/sch/acpi/hostbridge.asl233
-rw-r--r--src/soc/intel/sch/acpi/igd.asl73
-rw-r--r--src/soc/intel/sch/acpi/irqlinks.asl487
-rw-r--r--src/soc/intel/sch/acpi/lpc.asl261
-rw-r--r--src/soc/intel/sch/acpi/pata.asl74
-rw-r--r--src/soc/intel/sch/acpi/pci.asl71
-rw-r--r--src/soc/intel/sch/acpi/pcie.asl179
-rw-r--r--src/soc/intel/sch/acpi/peg.asl41
-rw-r--r--src/soc/intel/sch/acpi/sch.asl219
-rw-r--r--src/soc/intel/sch/acpi/sleepstates.asl21
-rw-r--r--src/soc/intel/sch/acpi/smbus.asl240
-rw-r--r--src/soc/intel/sch/acpi/usb.asl210
-rw-r--r--src/soc/intel/sch/audio.c312
-rw-r--r--src/soc/intel/sch/bootblock.c38
-rw-r--r--src/soc/intel/sch/chip.h39
-rw-r--r--src/soc/intel/sch/early_init.c213
-rw-r--r--src/soc/intel/sch/early_smbus.c57
-rw-r--r--src/soc/intel/sch/gma.c85
-rw-r--r--src/soc/intel/sch/ide.c87
-rw-r--r--src/soc/intel/sch/lpc.c230
-rw-r--r--src/soc/intel/sch/mmc.c76
-rw-r--r--src/soc/intel/sch/northbridge.c259
-rw-r--r--src/soc/intel/sch/nvs.h141
-rw-r--r--src/soc/intel/sch/pcie.c91
-rw-r--r--src/soc/intel/sch/port_access.c73
-rw-r--r--src/soc/intel/sch/raminit.c373
-rw-r--r--src/soc/intel/sch/raminit.h180
-rw-r--r--src/soc/intel/sch/reset.c29
-rw-r--r--src/soc/intel/sch/sch.h69
-rw-r--r--src/soc/intel/sch/smbus.c75
-rw-r--r--src/soc/intel/sch/smbus.h94
-rw-r--r--src/soc/intel/sch/smi.c339
-rw-r--r--src/soc/intel/sch/smihandler.c399
-rw-r--r--src/soc/intel/sch/south.c22
-rw-r--r--src/soc/intel/sch/usb.c87
-rw-r--r--src/soc/intel/sch/usb_client.c62
-rw-r--r--src/soc/intel/sch/usb_ehci.c91
68 files changed, 0 insertions, 7640 deletions
diff --git a/src/cpu/x86/smm/smmrelocate.S b/src/cpu/x86/smm/smmrelocate.S
index 230c78d079..ed556db7fc 100644
--- a/src/cpu/x86/smm/smmrelocate.S
+++ b/src/cpu/x86/smm/smmrelocate.S
@@ -25,8 +25,6 @@
#include "../../../southbridge/intel/i82801gx/i82801gx.h"
#elif IS_ENABLED(CONFIG_SOUTHBRIDGE_INTEL_I82801DX)
#include "../../../southbridge/intel/i82801dx/i82801dx.h"
-#elif IS_ENABLED(CONFIG_SOC_INTEL_SCH)
-#include "../../../soc/intel/sch/sch.h"
#elif IS_ENABLED(CONFIG_SOUTHBRIDGE_INTEL_I82801IX)
#include "../../../southbridge/intel/i82801ix/i82801ix.h"
#elif IS_ENABLED(CONFIG_SOUTHBRIDGE_INTEL_I82801JX)
diff --git a/src/mainboard/iwave/Kconfig b/src/mainboard/iwave/Kconfig
deleted file mode 100644
index 2af87f9abc..0000000000
--- a/src/mainboard/iwave/Kconfig
+++ /dev/null
@@ -1,17 +0,0 @@
-if VENDOR_IWAVE
-
-choice
- prompt "Mainboard model"
- depends on VENDOR_IWAVE
-
-source "src/mainboard/iwave/*/Kconfig.name"
-
-endchoice
-
-source "src/mainboard/iwave/*/Kconfig"
-
-config MAINBOARD_VENDOR
- string
- default "iWave"
-
-endif # VENDOR_IWAVE
diff --git a/src/mainboard/iwave/Kconfig.name b/src/mainboard/iwave/Kconfig.name
deleted file mode 100644
index 2babae31dd..0000000000
--- a/src/mainboard/iwave/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config VENDOR_IWAVE
- bool "iWave"
diff --git a/src/mainboard/iwave/iWRainbowG6/Kconfig b/src/mainboard/iwave/iWRainbowG6/Kconfig
deleted file mode 100644
index c441063dfd..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/Kconfig
+++ /dev/null
@@ -1,33 +0,0 @@
-if BOARD_IWAVE_RAINBOW_G6
-
-# TODO: move options to chipset components as appropriate
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select CPU_INTEL_SOCKET_441
- select SOC_INTEL_SCH
- select HAVE_PIRQ_TABLE
-# select HAVE_MP_TABLE
- select UDELAY_LAPIC
- select HAVE_ACPI_TABLES
- select BOARD_ROMSIZE_KB_1024
-
-config MAINBOARD_DIR
- string
- default iwave/iWRainbowG6
-
-config MAINBOARD_PART_NUMBER
- string
- default "iWRainbowG6"
-
-config MMCONF_BASE_ADDRESS
- hex
- default 0xe0000000
-
-config IRQ_SLOT_COUNT
- int
- default 10
-
-# This mainboard might have a higher clocked UART or might not be able to run
-# serial output at 115200 baud
-
-endif
diff --git a/src/mainboard/iwave/iWRainbowG6/Kconfig.name b/src/mainboard/iwave/iWRainbowG6/Kconfig.name
deleted file mode 100644
index d2be66239f..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config BOARD_IWAVE_RAINBOW_G6
- bool "iWRainbowG6"
diff --git a/src/mainboard/iwave/iWRainbowG6/Makefile.inc b/src/mainboard/iwave/iWRainbowG6/Makefile.inc
deleted file mode 100644
index f9621db6b3..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/Makefile.inc
+++ /dev/null
@@ -1 +0,0 @@
-ramstage-y += cstates.c
diff --git a/src/mainboard/iwave/iWRainbowG6/acpi/cpu.asl b/src/mainboard/iwave/iWRainbowG6/acpi/cpu.asl
deleted file mode 100644
index 7535b51ba4..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/acpi/cpu.asl
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* Intel Core (2) Duo CPU node support
- *
- * Note: The ACPI P_BLK on the ICH7 (and probably others) lives at
- * PMBASE + 0x10, and it's 0x06 bytes long. On ICH8 it's 8 bytes.
- *
- * The second CPU core does not need its own P_BLK.
- */
-
-Scope(\_PR)
-{
- Processor(
- CPU1, // name of cpu/core 0
- 1, // numeric id of cpu/core
- 0x510, // ACPI P_BLK base address
- 6 // ACPI P_BLK size
- )
- {
- // TODO: _PDT
- }
-
- Processor(
- CPU2, // name of cpu/core 1
- 2, // numeric id of cpu/core 1
- 0, // ACPI P_BLK base address
- 0) // ACPI P_BLK size
- {
- // TODO: _PDT
- }
-} // End _PR
diff --git a/src/mainboard/iwave/iWRainbowG6/acpi/ec.asl b/src/mainboard/iwave/iWRainbowG6/acpi/ec.asl
deleted file mode 100644
index 63abc00ccc..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/acpi/ec.asl
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-Device(EC0)
-{
- Name (_HID, EISAID("PNP0C09"))
- Name (_UID, 1)
-
- // _REG method requires that an operation region be defined.
- OperationRegion (ERAM, EmbeddedControl, 0x00, 0xff)
- Field (ERAM, ByteAcc, Lock, Preserve)
- {
- }
-
- Method (_CRS, 0, Serialized)
- {
- Name (ECMD, ResourceTemplate()
- {
- IO (Decode16, 0x62, 0x62, 0, 1)
- IO (Decode16, 0x66, 0x66, 0, 1)
- })
-
- Return (ECMD)
- }
-
- Method (_REG, 2)
- {
- // This method is needed by Windows XP/2000
- // for EC initialization before a driver
- // is loaded
- }
-
- Name (_GPE, 23) // GPI07 / GPE23 -> Runtime SCI
-
- // TODO EC Query methods
-
- // TODO Scope _SB devices for AC power, LID, Power button
-
-}
diff --git a/src/mainboard/iwave/iWRainbowG6/acpi/northbridge_pci_irqs.asl b/src/mainboard/iwave/iWRainbowG6/acpi/northbridge_pci_irqs.asl
deleted file mode 100644
index efb94c6745..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/acpi/northbridge_pci_irqs.asl
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* This is board specific information: IRQ routing for the
- * i945
- */
-
-
-// PCI Interrupt Routing
-Method(_PRT)
-{
- If (PICM) {
- Return (Package() {
- // PCIe Graphics 0:1.0
- Package() { 0x0001ffff, 0, 0, 16 },
- Package() { 0x0001ffff, 1, 0, 17 },
- Package() { 0x0001ffff, 2, 0, 18 },
- Package() { 0x0001ffff, 3, 0, 19 },
- // Onboard graphics (IGD) 0:2.0
- Package() { 0x0002ffff, 0, 0, 16 },
- // High Definition Audio 0:1b.0
- Package() { 0x001bffff, 0, 0, 16 },
- // PCIe Root Ports 0:1c.x
- Package() { 0x001cffff, 0, 0, 16 },
- Package() { 0x001cffff, 1, 0, 17 },
- Package() { 0x001cffff, 2, 0, 18 },
- Package() { 0x001cffff, 3, 0, 19 },
- // USB and EHCI 0:1d.x
- Package() { 0x001dffff, 0, 0, 23 },
- Package() { 0x001dffff, 1, 0, 19 },
- Package() { 0x001dffff, 2, 0, 18 },
- Package() { 0x001dffff, 3, 0, 16 },
- // AC97/IDE 0:1e.2, 0:1e.3
- Package() { 0x001effff, 0, 0, 17 },
- Package() { 0x001effff, 1, 0, 20 },
- // LPC device 0:1f.0
- Package() { 0x001fffff, 0, 0, 18 },
- Package() { 0x001fffff, 1, 0, 19},
- })
- } Else {
- Return (Package() {
- // PCIe Graphics 0:1.0
- Package() { 0x0001ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
- Package() { 0x0001ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 },
- Package() { 0x0001ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x0001ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 },
- // Onboard graphics (IGD) 0:2.0
- Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
- // High Definition Audio 0:1b.0
- Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
- // PCIe Root Ports 0:1c.x
- Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
- Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKB, 0 },
- Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKD, 0 },
- // USB and EHCI 0:1d.x
- Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKH, 0 },
- Package() { 0x001dffff, 1, \_SB.PCI0.LPCB.LNKD, 0 },
- Package() { 0x001dffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x001dffff, 3, \_SB.PCI0.LPCB.LNKA, 0 },
- // AC97/IDE 0:1e.2, 0:1e.3
- Package() { 0x001effff, 0, \_SB.PCI0.LPCB.LNKB, 0 },
- Package() { 0x001effff, 1, \_SB.PCI0.LPCB.LNKE, 0 },
- // LPC device 0:1f.0
- Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKD, 0 },
- })
- }
-}
diff --git a/src/mainboard/iwave/iWRainbowG6/acpi/platform.asl b/src/mainboard/iwave/iWRainbowG6/acpi/platform.asl
deleted file mode 100644
index 8e6d794a9a..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/acpi/platform.asl
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* The APM port can be used for generating software SMIs */
-
-OperationRegion (APMP, SystemIO, 0xb2, 2)
-Field (APMP, ByteAcc, NoLock, Preserve)
-{
- APMC, 8, // APM command
- APMS, 8 // APM status
-}
-
-/* Port 80 POST */
-
-OperationRegion (POST, SystemIO, 0x80, 1)
-Field (POST, ByteAcc, Lock, Preserve)
-{
- DBG0, 8
-}
-
-/* SMI I/O Trap */
-Method(TRAP, 1, Serialized)
-{
- Store (Arg0, SMIF) // SMI Function
- //Store (0, TRP0) // Generate trap
- Return (SMIF) // Return value of SMI handler
-}
-
-/* The _PIC method is called by the OS to choose between interrupt
- * routing via the i8259 interrupt controller or the APIC.
- *
- * _PIC is called with a parameter of 0 for i8259 configuration and
- * with a parameter of 1 for Local Apic/IOAPIC configuration.
- */
-
-Method(_PIC, 1)
-{
- // Remember the OS' IRQ routing choice.
- Store(Arg0, PICM)
-}
-
-/* The _PTS method (Prepare To Sleep) is called before the OS is
- * entering a sleep state. The sleep state number is passed in Arg0
- */
-
-Method(_PTS,1)
-{
- // Call a trap so SMI can prepare for Sleep as well.
- // TRAP(0x55)
-}
-
-/* The _WAK method is called on system wakeup */
-
-Method(_WAK,1)
-{
- // CPU specific part
-
- // Notify PCI Express slots in case a card
- // was inserted while a sleep state was active.
-
- // Are we going to S3?
- If (LEqual(Arg0, 3)) {
- // ..
- }
-
- // Are we going to S4?
- If (LEqual(Arg0, 4)) {
- // ..
- }
-
- // TODO: Windows XP SP2 P-State restore
-
- Return(Package(){0,0})
-}
diff --git a/src/mainboard/iwave/iWRainbowG6/acpi/sleepstates.asl b/src/mainboard/iwave/iWRainbowG6/acpi/sleepstates.asl
deleted file mode 100644
index c05835ac3c..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/acpi/sleepstates.asl
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-Name(\_S0, Package(4){0x0,0x0,0,0})
-Name(\_S1, Package(4){0x1,0x0,0,0})
-Name(\_S3, Package(4){0x5,0x0,0,0})
-Name(\_S4, Package(4){0x6,0x0,0,0})
-Name(\_S5, Package(4){0x7,0x0,0,0})
diff --git a/src/mainboard/iwave/iWRainbowG6/acpi/southbridge_pci_irqs.asl b/src/mainboard/iwave/iWRainbowG6/acpi/southbridge_pci_irqs.asl
deleted file mode 100644
index 67915f281f..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/acpi/southbridge_pci_irqs.asl
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* This is board specific information: IRQ routing for the
- * 0:1e.0 PCI bridge of the ICH7
- */
-
-If (PICM) {
- Return (Package() {
- Package() { 0x0000ffff, 0, 0, 16},
-
- Package() { 0x0001ffff, 0, 0, 20},
- Package() { 0x0001ffff, 1, 0, 21},
- Package() { 0x0001ffff, 2, 0, 22},
- Package() { 0x0001ffff, 3, 0, 23},
-
- Package() { 0x0002ffff, 0, 0, 21},
- Package() { 0x0002ffff, 1, 0, 22},
- Package() { 0x0002ffff, 2, 0, 23},
- Package() { 0x0002ffff, 3, 0, 20},
-
- Package() { 0x0003ffff, 0, 0, 22},
- Package() { 0x0003ffff, 1, 0, 23},
- Package() { 0x0003ffff, 2, 0, 20},
- Package() { 0x0003ffff, 3, 0, 21},
-
- Package() { 0x0004ffff, 0, 0, 23},
- Package() { 0x0004ffff, 1, 0, 20},
- Package() { 0x0004ffff, 2, 0, 21},
- Package() { 0x0004ffff, 3, 0, 22},
-
- Package() { 0x0005ffff, 0, 0, 19},
- Package() { 0x0005ffff, 1, 0, 18},
- Package() { 0x0005ffff, 2, 0, 17},
- Package() { 0x0005ffff, 3, 0, 16},
-
- Package() { 0x0006ffff, 0, 0, 18},
- Package() { 0x0006ffff, 1, 0, 17},
- Package() { 0x0006ffff, 2, 0, 16},
- Package() { 0x0006ffff, 3, 0, 19},
-
- Package() { 0x0009ffff, 0, 0, 21},
- Package() { 0x0009ffff, 1, 0, 22},
- Package() { 0x0009ffff, 2, 0, 23},
- Package() { 0x0009ffff, 3, 0, 20},
- })
-} Else {
- Return (Package() {
- Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKA, 0},
-
- Package() { 0x0001ffff, 0, \_SB.PCI0.LPCB.LNKE, 0},
- Package() { 0x0001ffff, 1, \_SB.PCI0.LPCB.LNKF, 0},
- Package() { 0x0001ffff, 2, \_SB.PCI0.LPCB.LNKG, 0},
- Package() { 0x0001ffff, 3, \_SB.PCI0.LPCB.LNKH, 0},
-
- Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKF, 0},
- Package() { 0x0002ffff, 1, \_SB.PCI0.LPCB.LNKG, 0},
- Package() { 0x0002ffff, 2, \_SB.PCI0.LPCB.LNKH, 0},
- Package() { 0x0002ffff, 3, \_SB.PCI0.LPCB.LNKE, 0},
-
- Package() { 0x0003ffff, 0, \_SB.PCI0.LPCB.LNKG, 0},
- Package() { 0x0003ffff, 1, \_SB.PCI0.LPCB.LNKH, 0},
- Package() { 0x0003ffff, 2, \_SB.PCI0.LPCB.LNKE, 0},
- Package() { 0x0003ffff, 3, \_SB.PCI0.LPCB.LNKF, 0},
-
- Package() { 0x0004ffff, 0, \_SB.PCI0.LPCB.LNKH, 0},
- Package() { 0x0004ffff, 1, \_SB.PCI0.LPCB.LNKE, 0},
- Package() { 0x0004ffff, 2, \_SB.PCI0.LPCB.LNKF, 0},
- Package() { 0x0004ffff, 3, \_SB.PCI0.LPCB.LNKG, 0},
-
- Package() { 0x0005ffff, 0, \_SB.PCI0.LPCB.LNKD, 0},
- Package() { 0x0005ffff, 1, \_SB.PCI0.LPCB.LNKC, 0},
- Package() { 0x0005ffff, 2, \_SB.PCI0.LPCB.LNKB, 0},
- Package() { 0x0005ffff, 3, \_SB.PCI0.LPCB.LNKA, 0},
-
- Package() { 0x0006ffff, 0, \_SB.PCI0.LPCB.LNKC, 0},
- Package() { 0x0006ffff, 1, \_SB.PCI0.LPCB.LNKB, 0},
- Package() { 0x0006ffff, 2, \_SB.PCI0.LPCB.LNKA, 0},
- Package() { 0x0006ffff, 3, \_SB.PCI0.LPCB.LNKD, 0},
-
- Package() { 0x0009ffff, 0, \_SB.PCI0.LPCB.LNKF, 0},
- Package() { 0x0009ffff, 1, \_SB.PCI0.LPCB.LNKG, 0},
- Package() { 0x0009ffff, 2, \_SB.PCI0.LPCB.LNKH, 0},
- Package() { 0x0009ffff, 3, \_SB.PCI0.LPCB.LNKE, 0},
- })
-}
diff --git a/src/mainboard/iwave/iWRainbowG6/acpi/superio.asl b/src/mainboard/iwave/iWRainbowG6/acpi/superio.asl
deleted file mode 100644
index 38343a587a..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/acpi/superio.asl
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-
-Device (SIO1)
-{
- Name (_HID, EISAID("PNP0A05"))
- Name (_UID, 1)
-
- Device (UAR1)
- {
- Name(_HID, EISAID("PNP0501"))
- Name(_UID, 1)
-
- // Some methods need an implementation here:
- // missing: _STA, _DIS, _CRS, _PRS,
- // missing: _SRS, _PS0, _PS3
- }
-
- Device (UAR2)
- {
- Name(_HID, EISAID("PNP0501"))
- Name(_UID, 2)
-
- // Some methods need an implementation here:
- // missing: _STA, _DIS, _CRS, _PRS,
- // missing: _SRS, _PS0, _PS3
- }
-}
diff --git a/src/mainboard/iwave/iWRainbowG6/acpi/thermal.asl b/src/mainboard/iwave/iWRainbowG6/acpi/thermal.asl
deleted file mode 100644
index de8fcddeab..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/acpi/thermal.asl
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-// Thermal Zone
-
-Scope (\_TZ)
-{
- ThermalZone (THRM)
- {
-
- // FIXME these could/should be read from the
- // GNVS area, so they can be controlled by
- // coreboot
- Name(TC1V, 0x04)
- Name(TC2V, 0x03)
- Name(TSPV, 0x64)
-
- // At which temperature should the OS start
- // active cooling?
- Method (_AC0, 0, Serialized)
- {
- Return (0xf5c) // Value for Rocky
- }
-
- // Method (_AC1, 0, Serialized)
- // {
- // Return (0xf5c)
- // }
-
- // Critical shutdown temperature
- Method (_CRT, 0, Serialized)
- {
- Return (Add (0x0aac, 0x50)) // FIXME
- }
-
- // CPU throttling start temperature
- Method (_PSV, 0, Serialized)
- {
- Return (0xaaf) // FIXME
- }
-
- // Get DTS Temperature
- Method (_TMP, 0, Serialized)
- {
- Return (0xaac) // FIXME
- }
-
- // Processors used for active cooling
- Method (_PSL, 0, Serialized)
- {
- If (MPEN) {
- Return (Package() {\_PR.CP01, \_PR.CP02})
- }
- Return (Package() {\_PR.CP01})
- }
-
- // TC1 value for passive cooling
- Method (_TC1, 0, Serialized)
- {
- Return (TC1V)
- }
-
- // TC2 value for passive cooling
- Method (_TC2, 0, Serialized)
- {
- Return (TC2V)
- }
-
- // Sampling period for passive cooling
- Method (_TSP, 0, Serialized)
- {
- Return (TSPV)
- }
-
-
- }
-}
diff --git a/src/mainboard/iwave/iWRainbowG6/acpi_tables.c b/src/mainboard/iwave/iWRainbowG6/acpi_tables.c
deleted file mode 100644
index 45b9da2e2c..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/acpi_tables.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <types.h>
-#include <string.h>
-#include <console/console.h>
-#include <arch/acpi.h>
-#include <arch/ioapic.h>
-#include <arch/acpigen.h>
-#include <arch/smp/mpspec.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-
-#include "soc/intel/sch/nvs.h"
-
-void acpi_create_gnvs(global_nvs_t * gnvs)
-{
- memset((void *)gnvs, 0, sizeof(*gnvs));
- gnvs->apic = 1;
- gnvs->mpen = 1; /* Enable Multi Processing. */
-
- /* Enable both COM ports. */
- gnvs->cmap = 0x01;
- gnvs->cmbp = 0x01;
-}
-
-unsigned long acpi_fill_madt(unsigned long current)
-{
- /* Local APICs */
- current = acpi_create_madt_lapics(current);
-
- /* IOAPIC */
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
- 2, IO_APIC_ADDR, 0);
-
- /* INT_SRC_OVR */
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
- current, 0, 0, 2, 0);
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
- current, 0, 9, 9,
- MP_IRQ_TRIGGER_LEVEL |
- MP_IRQ_POLARITY_HIGH);
-
- return current;
-}
diff --git a/src/mainboard/iwave/iWRainbowG6/board_info.txt b/src/mainboard/iwave/iWRainbowG6/board_info.txt
deleted file mode 100644
index ad25a93caa..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/board_info.txt
+++ /dev/null
@@ -1,3 +0,0 @@
-Board name: iW-RainboW-G6
-Category: half
-Board URL: http://www.iwavesystems.com/iW-RainbowG6.htm
diff --git a/src/mainboard/iwave/iWRainbowG6/cmos.layout b/src/mainboard/iwave/iWRainbowG6/cmos.layout
deleted file mode 100644
index 1081a15049..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/cmos.layout
+++ /dev/null
@@ -1,111 +0,0 @@
-#
-# This file is part of the coreboot project.
-#
-# Copyright (C) 2007-2009 coresystems GmbH
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; version 2 of
-# the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-
-# -----------------------------------------------------------------
-entries
-
-# -----------------------------------------------------------------
-# Status Register A
-# -----------------------------------------------------------------
-# Status Register B
-# -----------------------------------------------------------------
-# Status Register C
-#96 4 r 0 status_c_rsvd
-#100 1 r 0 uf_flag
-#101 1 r 0 af_flag
-#102 1 r 0 pf_flag
-#103 1 r 0 irqf_flag
-# -----------------------------------------------------------------
-# Status Register D
-#104 7 r 0 status_d_rsvd
-#111 1 r 0 valid_cmos_ram
-# -----------------------------------------------------------------
-# Diagnostic Status Register
-#112 8 r 0 diag_rsvd1
-
-# -----------------------------------------------------------------
-0 120 r 0 reserved_memory
-#120 264 r 0 unused
-
-# -----------------------------------------------------------------
-# RTC_BOOT_BYTE (coreboot hardcoded)
-384 1 e 4 boot_option
-388 4 h 0 reboot_counter
-#390 2 r 0 unused?
-
-# -----------------------------------------------------------------
-# coreboot config options: console
-#392 3 r 0 unused
-395 4 e 6 debug_level
-#399 1 r 0 unused
-
-# coreboot config options: cpu
-400 1 e 2 hyper_threading
-#401 7 r 0 unused
-
-# coreboot config options: southbridge
-408 1 e 1 nmi
-409 2 e 7 power_on_after_fail
-#411 5 r 0 unused
-
-# coreboot config options: bootloader
-416 512 s 0 boot_devices
-#928 40 r 0 unused
-
-968 1 e 2 ethernet1
-969 1 e 2 ethernet2
-970 1 e 2 ethernet3
-
-#971 13 r 0 unused
-
-# coreboot config options: check sums
-984 16 h 0 check_sum
-#1000 24 r 0 amd_reserved
-
-# RAM initialization internal data
-1024 8 r 0 C0WL0REOST
-1032 8 r 0 C1WL0REOST
-1040 8 r 0 RCVENMT
-1048 4 r 0 C0DRT1
-1052 4 r 0 C1DRT1
-
-# -----------------------------------------------------------------
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-6 1 Emergency
-6 2 Alert
-6 3 Critical
-6 4 Error
-6 5 Warning
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-7 0 Disable
-7 1 Enable
-7 2 Keep
-# -----------------------------------------------------------------
-checksums
-
-checksum 392 983 984
diff --git a/src/mainboard/iwave/iWRainbowG6/cstates.c b/src/mainboard/iwave/iWRainbowG6/cstates.c
deleted file mode 100644
index 2d543ff62e..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/cstates.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <device/device.h>
-#include <arch/x86/include/arch/acpigen.h>
-
-int get_cst_entries(acpi_cstate_t **entries)
-{
- return 0;
-}
diff --git a/src/mainboard/iwave/iWRainbowG6/devicetree.cb b/src/mainboard/iwave/iWRainbowG6/devicetree.cb
deleted file mode 100644
index b13d87300b..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/devicetree.cb
+++ /dev/null
@@ -1,40 +0,0 @@
-chip soc/intel/sch
- # IGD Displays
- register "gfx.ndid" = "3"
- register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
-
- # PIRQ routing
- register "pirqa_routing" = "0xa"
- register "pirqb_routing" = "0xb"
- register "pirqc_routing" = "0x5"
- register "pirqd_routing" = "0xf"
- register "pirqe_routing" = "0x80"
- register "pirqf_routing" = "0x80"
- register "pirqg_routing" = "0x80"
- register "pirqh_routing" = "0x80"
-
- device cpu_cluster 0 on
- chip cpu/intel/socket_441
- device lapic 0 on end
- end
- end
-
- device domain 0 on
- device pci 00.0 on end # host bridge
- device pci 02.0 on end # Integrated Graphics and Video Device
-
- device pci 1a.0 on end # 26 0 USB Client
- device pci 1b.0 on end # 27 0 HD Audio Controller
- device pci 1c.0 on end # 28 0 PCI Express Port 1
- device pci 1c.1 on end # 28 1 PCI Express Port 2
- device pci 1d.0 on end # USB Classic UHCI Controller 1
- device pci 1d.1 on end # USB Classic UHCI Controller 2
- device pci 1d.2 on end # USB Classic UHCI Controller 3
- device pci 1d.7 on end # USB2 EHCI Controller
- device pci 1e.0 on end # SDIO/MMC Port 0
- device pci 1e.1 on end # SDIO/MMC Port 1
- device pci 1e.2 on end # SDIO/MMC Port 2
- device pci 1f.0 on end # LPC bridge
- device pci 1f.1 on end # PATA Controller
- end
-end
diff --git a/src/mainboard/iwave/iWRainbowG6/dsdt.asl b/src/mainboard/iwave/iWRainbowG6/dsdt.asl
deleted file mode 100644
index 0dc46f2caa..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/dsdt.asl
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-DefinitionBlock(
- "dsdt.aml",
- "DSDT",
- 0x02, // DSDT revision: ACPI v2.0
- "COREv4", // OEM id
- "COREBOOT", // OEM table id
- 0x20090419 // OEM revision
-)
-{
- // Some generic macros
- #include "acpi/platform.asl"
-
- // global NVS and variables
- #include <soc/intel/sch/acpi/globalnvs.asl>
-
- // General Purpose Events
- //#include "acpi/gpe.asl"
-
- //#include "acpi/thermal.asl"
-
- Scope (\_SB) {
- Device (PCI0)
- {
- #include <soc/intel/sch/acpi/sch.asl>
- }
- }
-
- /* Chipset specific sleep states */
- #include <soc/intel/sch/acpi/sleepstates.asl>
-}
diff --git a/src/mainboard/iwave/iWRainbowG6/fadt.c b/src/mainboard/iwave/iWRainbowG6/fadt.c
deleted file mode 100644
index 86aa6063ed..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/fadt.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <string.h>
-#include <device/pci.h>
-#include <arch/acpi.h>
-#include <cpu/x86/smm.h>
-
-void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
-{
- acpi_header_t *header = &(fadt->header);
- u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)),
- 0x40) & 0xfffe;
-
- memset((void *)fadt, 0, sizeof(acpi_fadt_t));
- memcpy(header->signature, "FACP", 4);
- header->length = sizeof(acpi_fadt_t);
- header->revision = 3;
- memcpy(header->oem_id, OEM_ID, 6);
- memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8);
- memcpy(header->asl_compiler_id, ASLC, 4);
- header->asl_compiler_revision = 1;
-
- fadt->firmware_ctrl = (unsigned long)facs;
- fadt->dsdt = (unsigned long)dsdt;
- fadt->model = 1;
- fadt->preferred_pm_profile = PM_MOBILE;
-
- fadt->sci_int = 0x9;
- fadt->smi_cmd = APM_CNT;
- fadt->acpi_enable = APM_CNT_ACPI_ENABLE;
- fadt->acpi_disable = APM_CNT_ACPI_DISABLE;
- fadt->s4bios_req = 0x0;
- fadt->pstate_cnt = APM_CNT_PST_CONTROL;
-
- fadt->pm1a_evt_blk = pmbase;
- fadt->pm1b_evt_blk = 0x0;
- fadt->pm1a_cnt_blk = pmbase + 0x4;
- fadt->pm1b_cnt_blk = 0x0;
- fadt->pm2_cnt_blk = pmbase + 0x20;
- fadt->pm_tmr_blk = pmbase + 0x8;
- fadt->gpe0_blk = pmbase + 0x28;
- fadt->gpe1_blk = 0;
-
- fadt->pm1_evt_len = 4;
- fadt->pm1_cnt_len = 2;
- // XXX: pm2_cnt_len is probably wrong. find out right value (hint: it's != 0)
- fadt->pm2_cnt_len = 2;
- fadt->pm_tmr_len = 4;
- fadt->gpe0_blk_len = 8;
- fadt->gpe1_blk_len = 0;
- fadt->gpe1_base = 0;
- fadt->cst_cnt = APM_CNT_CST_CONTROL;
- fadt->p_lvl2_lat = 1;
- fadt->p_lvl3_lat = 85;
- fadt->flush_size = 1024;
- fadt->flush_stride = 16;
- fadt->duty_offset = 1;
- fadt->duty_width = 0;
- fadt->day_alrm = 0xd;
- fadt->mon_alrm = 0x00;
- fadt->century = 0x00;
- fadt->iapc_boot_arch = 0x03;
-
- fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED |
- ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON |
- ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK;
-
- fadt->reset_reg.space_id = 0;
- fadt->reset_reg.bit_width = 0;
- fadt->reset_reg.bit_offset = 0;
- fadt->reset_reg.resv = 0;
- fadt->reset_reg.addrl = 0x0;
- fadt->reset_reg.addrh = 0x0;
-
- fadt->reset_value = 0;
- fadt->x_firmware_ctl_l = (unsigned long)facs;
- fadt->x_firmware_ctl_h = 0;
- fadt->x_dsdt_l = (unsigned long)dsdt;
- fadt->x_dsdt_h = 0;
-
- fadt->x_pm1a_evt_blk.space_id = 1;
- fadt->x_pm1a_evt_blk.bit_width = 32;
- fadt->x_pm1a_evt_blk.bit_offset = 0;
- fadt->x_pm1a_evt_blk.resv = 0;
- fadt->x_pm1a_evt_blk.addrl = pmbase;
- fadt->x_pm1a_evt_blk.addrh = 0x0;
-
- fadt->x_pm1b_evt_blk.space_id = 1;
- fadt->x_pm1b_evt_blk.bit_width = 0;
- fadt->x_pm1b_evt_blk.bit_offset = 0;
- fadt->x_pm1b_evt_blk.resv = 0;
- fadt->x_pm1b_evt_blk.addrl = 0x0;
- fadt->x_pm1b_evt_blk.addrh = 0x0;
-
- fadt->x_pm1a_cnt_blk.space_id = 1;
- fadt->x_pm1a_cnt_blk.bit_width = 16;
- fadt->x_pm1a_cnt_blk.bit_offset = 0;
- fadt->x_pm1a_cnt_blk.resv = 0;
- fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4;
- fadt->x_pm1a_cnt_blk.addrh = 0x0;
-
- fadt->x_pm1b_cnt_blk.space_id = 1;
- fadt->x_pm1b_cnt_blk.bit_width = 0;
- fadt->x_pm1b_cnt_blk.bit_offset = 0;
- fadt->x_pm1b_cnt_blk.resv = 0;
- fadt->x_pm1b_cnt_blk.addrl = 0x0;
- fadt->x_pm1b_cnt_blk.addrh = 0x0;
-
- fadt->x_pm2_cnt_blk.space_id = 1;
- fadt->x_pm2_cnt_blk.bit_width = 8;
- fadt->x_pm2_cnt_blk.bit_offset = 0;
- fadt->x_pm2_cnt_blk.resv = 0;
- fadt->x_pm2_cnt_blk.addrl = pmbase + 0x20;
- fadt->x_pm2_cnt_blk.addrh = 0x0;
-
- fadt->x_pm_tmr_blk.space_id = 1;
- fadt->x_pm_tmr_blk.bit_width = 32;
- fadt->x_pm_tmr_blk.bit_offset = 0;
- fadt->x_pm_tmr_blk.resv = 0;
- fadt->x_pm_tmr_blk.addrl = pmbase + 0x8;
- fadt->x_pm_tmr_blk.addrh = 0x0;
-
- fadt->x_gpe0_blk.space_id = 1;
- fadt->x_gpe0_blk.bit_width = 64;
- fadt->x_gpe0_blk.bit_offset = 0;
- fadt->x_gpe0_blk.resv = 0;
- fadt->x_gpe0_blk.addrl = pmbase + 0x28;
- fadt->x_gpe0_blk.addrh = 0x0;
-
- fadt->x_gpe1_blk.space_id = 1;
- fadt->x_gpe1_blk.bit_width = 0;
- fadt->x_gpe1_blk.bit_offset = 0;
- fadt->x_gpe1_blk.resv = 0;
- fadt->x_gpe1_blk.addrl = 0x0;
- fadt->x_gpe1_blk.addrh = 0x0;
-
- header->checksum = acpi_checksum((void *)fadt, header->length);
-}
diff --git a/src/mainboard/iwave/iWRainbowG6/hda_verb.c b/src/mainboard/iwave/iWRainbowG6/hda_verb.c
deleted file mode 100644
index 5e6f5950e3..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/hda_verb.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009-2010 iWave Systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <device/azalia_device.h>
-
-const u32 cim_verb_data[] = {
- /* coreboot specific header */
- 0x111d76d5, // Codec Vendor / Device ID: IDT 92HD81
- 0x00000000, // Subsystem ID
- 0x0000000a, // Number of jacks
-
- /* NID 0x0a, Port A (capless headphone) */
- 0x0A71C40,
- 0x0A71D10,
- 0x0A71EA1,
- 0x0A71F02,
-
- /* NID 0x0b, Port B (capless headphone) */
- 0x0B71C1F,
- 0x0B71D10,
- 0x0B71E21,
- 0x0B71F02,
-
- /*
- * NID 0x0c, Port C (Line IN/OUT+MIC for YD/UA revisions, and
- * Line IN+MIC for TA revision)
- */
- 0x0C71CF0,
- 0x0C71D00,
- 0x0C71E00,
- 0x0C71F40,
-
- /* NID 0x0d, Port D (BTL output - EAPD control) */
- 0x0D71C10,
- 0x0D71D41,
- 0x0D71E10,
- 0x0D71F10,
-
- /* NID 0x0e, Port E (Line IN/OUT) */
- 0x0E71CF0,
- 0x0E71D00,
- 0x0E71E00,
- 0x0E71F40,
-
- /* NID 0x0f, Port F (Line IN/OUT, MIC) */
- 0x0F71CF0,
- 0x0F71D00,
- 0x0F71E00,
- 0x0F71F40,
-
- /* NID 0x10, MonoOut (output-only) */
- 0x1071CF0,
- 0x1071D00,
- 0x1071EF0,
- 0x1071F40,
-
- /* NID 0x10, DigMic0 (Digital Microphone 0) */
- 0x1171CF0,
- 0x1171D00,
- 0x1171E00,
- 0x1171F40,
-
- /* NID 0x1f, Dig0Pin (First Digital Output Pin) */
- 0x1F71C50,
- 0x1F71D21,
- 0x1F71E40,
- 0x1F71F10,
-
- /* NID 0x20, Dig1Pin (Second Digital Output Pin / DMIC Input Pin) */
- 0x2071CF0,
- 0x2071D00,
- 0x2071E00,
- 0x2071F40,
-
- /* BTL Gain */
- 0x017F417, /* Gain = 16.79dB */
-};
-
-const u32 pc_beep_verbs[0] = {};
-
-AZALIA_ARRAY_SIZES;
diff --git a/src/mainboard/iwave/iWRainbowG6/irq_tables.c b/src/mainboard/iwave/iWRainbowG6/irq_tables.c
deleted file mode 100644
index 8ad7e25e4a..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/irq_tables.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2008 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <arch/pirq_routing.h>
-
-static const struct irq_routing_table intel_irq_routing_table = {
- PIRQ_SIGNATURE, /* u32 signature */
- PIRQ_VERSION, /* u16 version */
- 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* Max. number of devices on the bus */
- 0x00, /* Interrupt router bus */
- (0x1f << 3) | 0x0, /* Interrupt router dev */
- 0, /* IRQs devoted exclusively to PCI usage */
- 0x8086, /* Vendor */
- 0x8119, /* Device*/
- 0, /* Miniport */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
- 0xdf, /* Checksum (has to be set to some value that
- * would give 0 after the sum of all bytes
- * for this structure (including checksum).
- */
- {
- /* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
- {0x00, (0x02 << 3) | 0x0, {{0x60, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0},
- {0x00, (0x1e << 3) | 0x0, {{0x60, 0x5cb8}, {0x61, 0x5cb8}, {0x62, 0x5cb8}, {0x00, 0x0000}}, 0x0, 0x0},
- {0x00, (0x1f << 3) | 0x0, {{0x62, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0},
- {0x00, (0x1a << 3) | 0x0, {{0x60, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0},
- {0x00, (0x1d << 3) | 0x0, {{0x64, 0x8200}, {0x65, 0x8200}, {0x66, 0x8200}, {0x67, 0x8200}}, 0x0, 0x0},
- {0x00, (0x1b << 3) | 0x0, {{0x60, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0},
- {0x00, (0x1c << 3) | 0x0, {{0x60, 0x5cb8}, {0x61, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0},
- {0x01, (0x00 << 3) | 0x0, {{0x60, 0x5cb8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0},
- {0x02, (0x00 << 3) | 0x0, {{0x61, 0x5cb8}, {0x62, 0x5cb8}, {0x63, 0x5cb8}, {0x60, 0x5cb8}}, 0x2, 0x0},
- {0x00, (0x00 << 3) | 0x0, {{0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0},
- }
-};
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- return copy_pirq_routing_table(addr, &intel_irq_routing_table);
-}
diff --git a/src/mainboard/iwave/iWRainbowG6/mptable.c b/src/mainboard/iwave/iWRainbowG6/mptable.c
deleted file mode 100644
index 5ba63bc0cd..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/mptable.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2008 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-
-void *smp_write_config_table(void *v)
-{
- struct mp_config_table *mc;
- int isa_bus;
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
- mptable_init(mc, LOCAL_APIC_ADDR);
-
- smp_write_processors(mc);
- mptable_write_buses(mc, NULL, &isa_bus);
-
- smp_write_ioapic(mc, 2, 0x20, VIO_APIC_VADDR);
- {
- device_t dev;
- struct resource *res;
- dev = dev_find_slot(1, PCI_DEVFN(0x1e,0));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, 3, 0x20, res->base);
- }
- }
- dev = dev_find_slot(1, PCI_DEVFN(0x1c,0));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, 4, 0x20, res->base);
- }
- }
- dev = dev_find_slot(4, PCI_DEVFN(0x1e,0));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, 5, 0x20, res->base);
- }
- }
- dev = dev_find_slot(4, PCI_DEVFN(0x1c,0));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, 8, 0x20, res->base);
- }
- }
- }
-/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
-*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x0, 0x1, 0x0);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x1, 0x1, 0x1);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x0, 0x1, 0x2);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x3, 0x1, 0x3);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x4, 0x1, 0x4);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x6, 0x1, 0x6);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x7, 0x1, 0x7);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x1, 0x8, 0x1, 0x8);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0x9, 0x1, 0x9);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0xc, 0x1, 0xc);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0xd, 0x1, 0xd);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, 0x1, 0xe, 0x1, 0xe);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x8, 0x1, 0x10);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x74, 0x1, 0x10);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x75, 0x1, 0x11);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x76, 0x1, 0x12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x77, 0x1, 0x13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x6c, 0x1, 0x10);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x78, 0x1, 0x10);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x79, 0x1, 0x11);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, 0x7a, 0x1, 0x12);
-/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
- mptable_lintsrc(mc, isa_bus);
- /* There is no extension information... */
-
- /* Compute the checksums */
- return mptable_finalize(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr, 0);
- return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/iwave/iWRainbowG6/romstage.c b/src/mainboard/iwave/iWRainbowG6/romstage.c
deleted file mode 100644
index a5c0c9ce12..0000000000
--- a/src/mainboard/iwave/iWRainbowG6/romstage.c
+++ /dev/null
@@ -1,379 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009-2010 iWave Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <stdint.h>
-#include <string.h>
-#include <arch/io.h>
-#include <device/pci_def.h>
-#include <device/pnp_def.h>
-#include <cpu/x86/lapic.h>
-#include <cpu/x86/cache.h>
-#include <cpu/intel/romstage.h>
-#include <arch/cpu.h>
-#include <console/console.h>
-#if 0
-#include "ram/ramtest.c"
-#include "soc/intel/sch/early_smbus.c"
-#endif
-
-#define RFID_TEST 0
-
-#if RFID_TEST
-#define RFID_ADDR 0xA0
-#define RFID_SELECT_CARD_COMMAND 0x01
-#define SELECT_COMMAND_LENGTH 0x01
-
-#define SMBUS_BASE_ADDRESS 0x400
-
-static u32 sch_SMbase_read(void)
-{
- u32 SMBusBase;
-
- /* SMBus address */
- SMBusBase = pci_read_config32(PCI_DEV(0, 0x1f, 0), 0x40);
- SMBusBase &= 0xFFFF;
- printk(BIOS_DEBUG, "SMBus base = %x\r\n", SMBusBase);
- return SMBusBase;
-}
-
-static void sch_SMbase_init(void)
-{
- u32 SMBusBase;
-
- SMBusBase = sch_SMbase_read();
- outb(0x3F, SMBusBase + SMBCLKDIV);
-}
-
-static void sch_SMbus_regs(void)
-{
- u32 SMBusBase;
-
- SMBusBase = sch_SMbase_read();
- printk(BIOS_DEBUG, "SMBHSTCNT. =%x\r\n", inb(SMBusBase + SMBHSTCNT));
- printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n", inb(SMBusBase + SMBHSTSTS));
- printk(BIOS_DEBUG, "SMBCLKDIV. =%x\r\n", inb(SMBusBase + SMBCLKDIV));
-
- printk(BIOS_DEBUG, "SMBHSTADD. =%x\r\n", inb(SMBusBase + SMBHSTADD));
- printk(BIOS_DEBUG, "SMBHSTCMD. =%x\r\n", inb(SMBusBase + SMBHSTCMD));
-}
-
-void smb_clear(void)
-{
- u32 SMBusBase;
-
- SMBusBase = sch_SMbase_read();
- outb(0x00, SMBusBase + SMBHSTCNT);
- outb(0x07, SMBusBase + SMBHSTSTS);
-}
-
-void data_clear(void)
-{
- u32 SMBusBase;
-
- SMBusBase = sch_SMbase_read();
- outb(0x00, SMBusBase + SMBHSTDAT0);
- outb(0x00, SMBusBase + SMBHSTCMD);
- outb(0x00, SMBusBase + SMBHSTDAT1);
- outb(0x00, SMBusBase + SMBHSTDATB);
- outb(0x00, SMBusBase + (SMBHSTDATB + 0x1));
- outb(0x00, SMBusBase + (SMBHSTDATB + 0x2));
- outb(0x00, SMBusBase + (SMBHSTDATB + 0x3));
- outb(0x00, SMBusBase + (SMBHSTDATB + 0x4));
- outb(0x00, SMBusBase + (SMBHSTDATB + 0x5));
- outb(0x00, SMBusBase + (SMBHSTDATB + 0x6));
-}
-
-void transaction1(unsigned char dev_addr)
-{
- int temp, a;
- u32 SMBusBase;
-
- SMBusBase = sch_SMbase_read();
- printk(BIOS_DEBUG, "Transaction 1");
- //clear the control and status registers
- smb_clear();
- //clear the data register
- data_clear();
- //program TSA register
- outb(dev_addr, SMBusBase + SMBHSTADD);
- //program command register
- outb(0x04, SMBusBase + SMBHSTCMD);
- //write data register
- outb(0x04, SMBusBase + SMBHSTDAT0);
- outb(0x04, SMBusBase + SMBHSTDATB);
-
- outb(0x09, SMBusBase + (SMBHSTDATB + 0x1));
- outb(0x11, SMBusBase + (SMBHSTDATB + 0x2));
- outb(0x22, SMBusBase + (SMBHSTDATB + 0x3));
-
- //set the control register
- outb(0x15, SMBusBase + SMBHSTCNT);
- //check the status register for busy state
- //sch_SMbus_regs ();
- temp = inb(SMBusBase + SMBHSTSTS);
- //printk(BIOS_DEBUG, "SMBus Busy.. status =%x\r\n",temp);
- //printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n",inb(SMBusBase+SMBHSTSTS));
- do {
- temp = inb(SMBusBase + SMBHSTSTS);
- printk(BIOS_DEBUG, "SMBus Busy.. status =%x\r\n", temp);
- //sch_SMbus_regs ();
- printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n",
- inb(SMBusBase + SMBHSTSTS));
- if (temp > 0)
- break;
- } while (1);
-
- switch (temp) {
- case 1:
- printk(BIOS_DEBUG, "SMBus Success");
- break;
- default:
- printk(BIOS_DEBUG, "SMBus error %d", temp);
- break;
-
- }
- sch_SMbus_regs();
- printk(BIOS_DEBUG, "Command in TRansaction 1=%x\r\n\n",
- inb(SMBusBase + SMBHSTCMD));
-}
-
-void transaction2(unsigned char dev_addr)
-{
- int temp, a;
- u32 SMBusBase;
-
- SMBusBase = sch_SMbase_read();
- printk(BIOS_DEBUG, "Transaction 2");
- //clear the control and status registers
- smb_clear();
- //clear the data register
- data_clear();
- //program TSA register
- outb(dev_addr, SMBusBase + SMBHSTADD);
- //program command register
- outb(0x03, SMBusBase + SMBHSTCMD);
- //write data register
- outb(0x02, SMBusBase + SMBHSTDAT0);
- outb(0x03, SMBusBase + SMBHSTDATB);
- outb(0x09, SMBusBase + (SMBHSTDATB + 0x1));
- outb(0x15, SMBusBase + SMBHSTCNT);
- //check the status register for busy state
- //sch_SMbus_regs ();
- temp = inb(SMBusBase + SMBHSTSTS);
- //printk(BIOS_DEBUG, "SMBus Busy.. status =%x\r\n",temp);
- //printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n",inb(SMBusBase+SMBHSTSTS));
- do {
- temp = inb(SMBusBase + SMBHSTSTS);
- printk(BIOS_DEBUG, "SMBus Busy.. status =%x\r\n", temp);
- //sch_SMbus_regs ();
- printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n",
- inb(SMBusBase + SMBHSTSTS));
- if (temp > 0)
- break;
- } while (1);
-
- switch (temp) {
- case 1:
- printk(BIOS_DEBUG, "SMBus Success");
- break;
- default:
- printk(BIOS_DEBUG, "SMBus error %d", temp);
- break;
-
- }
- sch_SMbus_regs();
-
- printk(BIOS_DEBUG, "Command in TRansaction 2=%x\r\n\n",
- inb(SMBusBase + SMBHSTCMD));
-}
-
-void transaction3(unsigned char dev_addr)
-{
- int temp, index, length;
- u32 SMBusBase;
-
- SMBusBase = sch_SMbase_read();
- printk(BIOS_DEBUG, "smb_read_multiple_bytes");
- smb_clear();
- data_clear();
- outb(dev_addr, SMBusBase + SMBHSTADD);
- outb(0x03, SMBusBase + SMBHSTCMD);
- outb(0x11, SMBusBase + SMBHSTCNT);
-
- //data_clear();
- outb(dev_addr + 1, SMBusBase + SMBHSTADD);
-
- outb(0x15, SMBusBase + SMBHSTCNT);
-
- // sch_SMbus_regs ();
- //check the status register for busy state
- //temp = inb(SMBusBase+SMBHSTSTS);
- //printk(BIOS_DEBUG, "SMBus Busy.. status =%x\r\n",temp);
- //sch_SMbus_regs ();
- //printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n",inb(SMBusBase+SMBHSTSTS));
- do {
- temp = inb(SMBusBase + SMBHSTSTS);
- printk(BIOS_DEBUG, "SMBHSTSTS. =%x\r\n",
- inb(SMBusBase + SMBHSTSTS));
- //sch_SMbus_regs ();
- if (temp > 0)
- break;
- } while (1);
-
- switch (temp) {
- case 1:
- printk(BIOS_DEBUG, "SMBus Success\n");
- break;
- default:
- printk(BIOS_DEBUG, "SMBus error %d", temp);
- break;
-
- }
-
- sch_SMbus_regs();
- printk(BIOS_DEBUG, "ADDRESS is.. %x\r\n", inb(SMBusBase + SMBHSTADD));
- length = inb(SMBusBase + SMBHSTDAT0);
-
- printk(BIOS_DEBUG, "Length is.. %x\r\n", inb(SMBusBase + SMBHSTDAT0));
-
- printk(BIOS_DEBUG, "Command is... %x\r\n", inb(SMBusBase + SMBHSTDATB));
- printk(BIOS_DEBUG, "Status .. %x\r\n", inb(SMBusBase + SMBHSTDATB + 1));
- for (index = 0; index < length; index++)
- printk(BIOS_DEBUG, "Serial Byte[%x]..%x\r\n", index,
- inb(SMBusBase + SMBHSTDATB + index));
-}
-
-int selectcard(void)
-{
- int i;
-
- printk(BIOS_DEBUG, "%s", "\r\nCase 9.......\r\n");
- // send the length byte and command code through RFID interface
-
- transaction1(RFID_ADDR);
- transaction2(RFID_ADDR);
- transaction3(RFID_ADDR);
- return (1);
-}
-#endif
-
-#include "soc/intel/sch/early_init.c"
-#include <soc/intel/sch/raminit.h>
-#include "soc/intel/sch/raminit.c"
-
-static void sch_enable_lpc(void)
-{
- /* Initialize the FWH decode/Enable registers according to platform design */
- pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xD0, 0x00112233);
- pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xD4, 0xC0000000);
- pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x60, 0x808A8B8B);
- pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x64, 0x8F898F89);
-}
-
-static void sch_shadow_CMC(void)
-{
- u32 reg32;
-
- /* FIXME: proper dest, proper src, and wbinvd, too */
- memcpy((void *)CMC_SHADOW, (void *)0xfffd0000, 64 * 1024);
- // __asm__ volatile ("wbinvd\n"
- //);
- printk(BIOS_DEBUG, "copy done ");
- memcpy((void *)0x3f5f0000, (void *)0x3faf0000, 64 * 1024);
- printk(BIOS_DEBUG, "copy 2 done ");
- reg32 = cpuid_eax(0x00000001);
- printk(BIOS_INFO, "CPU ID: %d.\n", reg32);
-
- reg32 = cpuid_eax(0x80000008);
- printk(BIOS_INFO, "Physical Address size: %d.\n", (reg32 & 0xFF));
- printk(BIOS_INFO, "Virtual Address size: %d.\n",
- ((reg32 & 0xFF00) >> 8));
- sch_port_access_write_ram_cmd(0xB8, 4, 0, 0x3faf0000);
- printk(BIOS_DEBUG, "1 ");
- sch_port_access_write_ram_cmd(0xBA, 4, 0, reg32);
- printk(BIOS_DEBUG, "2 ");
-}
-
-static void poulsbo_setup_Stage1Regs(void)
-{
- u32 reg32;
-
- printk(BIOS_DEBUG, "E000/F000 Routing ");
- reg32 = sch_port_access_read(2, 3, 4);
- sch_port_access_write(2, 3, 4, (reg32 | 0x6));
-}
-
-static void poulsbo_setup_Stage2Regs(void)
-{
- u16 reg16;
-
- printk(BIOS_DEBUG, "Reserved");
- reg16 = pci_read_config16(PCI_DEV(0, 0x2, 0), 0x62);
- pci_write_config16(PCI_DEV(0, 0x2, 0), 0x62, (reg16 | 0x3));
- /* Slot capabilities */
- pci_write_config32(PCI_DEV(0, 28, 0), 0x54, 0x80500);
- pci_write_config32(PCI_DEV(0, 28, 1), 0x54, 0x100500);
- /* FIXME: CPU ID identification */
- printk(BIOS_DEBUG, " done.\n");
-}
-
-void mainboard_romstage_entry(unsigned long bist)
-{
- int boot_mode = 0;
-
- if (bist == 0)
- enable_lapic();
-
- sch_enable_lpc();
- console_init();
-
- /* Halt if there was a built in self test failure */
- // report_bist_failure(bist);
- // outl (0x00, 0x1088);
-
- /*
- * Perform some early chipset initialization required
- * before RAM initialization can work.
- */
- sch_early_initialization();
- sdram_initialize(boot_mode);
-
- sch_shadow_CMC();
- poulsbo_setup_Stage1Regs();
- poulsbo_setup_Stage2Regs();
-#if 0
- sch_SMbase_init();
-
- /* Perform some initialization that must run before stage2. */
-#endif
-
- /*
- * This should probably go away. Until now it is required
- * and mainboard specific.
- */
-
- /* Chipset Errata! */
- pci_write_config16(PCI_DEV(0, 0x2, 0), GGC, 0x20);
- pci_write_config32(PCI_DEV(0, 0x2, 0), 0xc4, 0x00000002);
- pci_write_config32(PCI_DEV(0, 0x2, 0), 0xe0, 0x00008000);
- pci_write_config32(PCI_DEV(0, 0x2, 0), 0xf0, 0x00000005);
- pci_write_config16(PCI_DEV(0, 0x2, 0), 0xf7, 0x80);
- pci_write_config16(PCI_DEV(0, 0x2, 0), 0x4, 0x7);
-
-#if RFID_TEST
- sch_SMbase_init();
- selectcard();
-#endif
-}
diff --git a/src/soc/intel/sch/Kconfig b/src/soc/intel/sch/Kconfig
deleted file mode 100644
index 2456df79ca..0000000000
--- a/src/soc/intel/sch/Kconfig
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# This file is part of the coreboot project.
-#
-# Copyright (C) 2007-2010 coresystems GmbH
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-
-config SOC_INTEL_SCH
- bool
- select LATE_CBMEM_INIT
- select INTEL_GMA_ACPI
- select SOUTHBRIDGE_INTEL_COMMON
- select HAVE_USBDEBUG
- select HAVE_HARD_RESET
- select HAVE_SMI_HANDLER
-
-if SOC_INTEL_SCH
-
-config BOOTBLOCK_NORTHBRIDGE_INIT
- string
- default "soc/intel/sch/bootblock.c"
-
-config VGA_BIOS_ID
- string
- default "8086,8108"
-
-config EHCI_BAR
- hex
- default 0xfef00000
-
-config HAVE_CMC
- bool "Add a CMC state machine binary"
- help
- Select this option to add a CMC state machine binary to
- the resulting coreboot image.
-
- Note: Without this binary coreboot will not work
-
-config CMC_FILE
- string "Intel CMC path and filename"
- depends on HAVE_CMC
- default "cmc.bin"
- help
- The path and filename of the file to use as CMC state machine
- binary.
-
-config HPET_MIN_TICKS
- hex
- default 0x80
-
-endif
diff --git a/src/soc/intel/sch/Makefile.inc b/src/soc/intel/sch/Makefile.inc
deleted file mode 100644
index 0a3cfd6d7d..0000000000
--- a/src/soc/intel/sch/Makefile.inc
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-# This file is part of the coreboot project.
-#
-# Copyright (C) 2007-2010 coresystems GmbH
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-
-ifeq ($(CONFIG_SOC_INTEL_SCH),y)
-
-ramstage-y += northbridge.c
-ramstage-y += gma.c
-ramstage-y += port_access.c
-ramstage-y += acpi.c
-
-ramstage-y += south.c
-ramstage-y += audio.c
-ramstage-y += lpc.c
-ramstage-y += ide.c
-ramstage-y += pcie.c
-ramstage-y += usb.c
-ramstage-y += usb_ehci.c
-ramstage-y += usb_client.c
-ramstage-y += mmc.c
-ramstage-y += smbus.c
-
-ramstage-y += reset.c
-
-ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c
-ramstage-$(CONFIG_HAVE_SMI_HANDLER) += ../../../cpu/x86/smm/smmrelocate.S
-smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c
-
-ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/hda_verb.c
-
-# We don't ship that, but booting without it is bound to fail
-cbfs-files-$(CONFIG_HAVE_CMC) += cmc.bin
-cmc.bin-file := $(call strip_quotes,$(CONFIG_CMC_FILE))
-cmc.bin-type := raw
-cmc.bin-position := 0xfffd0000
-
-endif
diff --git a/src/soc/intel/sch/acpi.c b/src/soc/intel/sch/acpi.c
deleted file mode 100644
index 2c941d868e..0000000000
--- a/src/soc/intel/sch/acpi.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <types.h>
-#include <string.h>
-#include <console/console.h>
-#include <arch/acpi.h>
-#include <arch/acpigen.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <cbmem.h>
-#include <arch/acpigen.h>
-#include <cpu/cpu.h>
-#include "sch.h"
-
-unsigned long acpi_fill_mcfg(unsigned long current)
-{
- device_t dev;
- u32 pciexbar = 0;
- u32 pciexbar_reg;
- int max_buses;
-
- dev = dev_find_device(0x8086, 0x27a0, 0);
- if (!dev)
- return current;
-
- pciexbar_reg = pci_read_config32(dev, 0x48);
-
- /* MMCFG not supported or not enabled. */
- if (!(pciexbar_reg & (1 << 0)))
- return current;
-
- switch ((pciexbar_reg >> 1) & 3) {
- case 0: /* 256MB */
- pciexbar = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) |
- (1 << 28));
- max_buses = 256;
- break;
- case 1: /* 128M */
- pciexbar = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) |
- (1 << 28) | (1 << 27));
- max_buses = 128;
- break;
- case 2: /* 64M */
- pciexbar = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) |
- (1 << 28) | (1 << 27) | (1 << 26));
- max_buses = 64;
- break;
- default: /* RSVD */
- return current;
- }
-
- if (!pciexbar)
- return current;
-
- current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *) current,
- pciexbar, 0x0, 0x0, max_buses - 1);
- return current;
-}
diff --git a/src/soc/intel/sch/acpi/ac97.asl b/src/soc/intel/sch/acpi/ac97.asl
deleted file mode 100644
index e1db234a63..0000000000
--- a/src/soc/intel/sch/acpi/ac97.asl
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* Intel i82801G AC'97 Audio and Modem */
-
-// Intel AC'97 Audio 0:1e.2
-
-Device (AUD0)
-{
- Name (_ADR, 0x001e0002)
-}
-
-// Intel AC'97 Modem 0:1e.3
-
-Device (MODM)
-{
- Name (_ADR, 0x001e0003)
-
- Name (_PRW, Package(){ 5, 4 })
-}
diff --git a/src/soc/intel/sch/acpi/audio.asl b/src/soc/intel/sch/acpi/audio.asl
deleted file mode 100644
index 9e0d997482..0000000000
--- a/src/soc/intel/sch/acpi/audio.asl
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* Intel i82801G HDA */
-
-// Intel High Definition Audio (Azalia) 0:1b.0
-
-Device (HDEF)
-{
- Name (_ADR, 0x001b0000)
-
- // Power Resources for Wake
- Name (_PRW, Package(){
- 5, // Bit 5 of GPE
- 4 // Can wake from S4 state.
- })
-}
diff --git a/src/soc/intel/sch/acpi/globalnvs.asl b/src/soc/intel/sch/acpi/globalnvs.asl
deleted file mode 100644
index ea53953928..0000000000
--- a/src/soc/intel/sch/acpi/globalnvs.asl
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* Global Variables */
-
-Name(\PICM, 0) // IOAPIC/8259
-Name(\DSEN, 1) // Display Output Switching Enable
-
-/* Global ACPI memory region. This region is used for passing information
- * between coreboot (aka "the system bios"), ACPI, and the SMI handler.
- * Since we don't know where this will end up in memory at ACPI compile time,
- * we have to fix it up in coreboot's ACPI creation phase.
- */
-
-External(NVSA)
-OperationRegion (GNVS, SystemMemory, NVSA, 0x100)
-Field (GNVS, ByteAcc, NoLock, Preserve)
-{
- /* Miscellaneous */
- Offset (0x00),
- OSYS, 16, // 0x00 - Operating System
- SMIF, 8, // 0x02 - SMI function
- PRM0, 8, // 0x03 - SMI function parameter
- PRM1, 8, // 0x04 - SMI function parameter
- SCIF, 8, // 0x05 - SCI function
- PRM2, 8, // 0x06 - SCI function parameter
- PRM3, 8, // 0x07 - SCI function parameter
- LCKF, 8, // 0x08 - Global Lock function for EC
- PRM4, 8, // 0x09 - Lock function parameter
- PRM5, 8, // 0x0a - Lock function parameter
- P80D, 32, // 0x0b - Debug port (IO 0x80) value
- LIDS, 8, // 0x0f - LID state (open = 1)
- PWRS, 8, // 0x10 - Power State (AC = 1)
- DBGS, 8, // 0x11 - Debug State
- LINX, 8, // 0x12 - Linux OS
- DCKN, 8, // 0x13 - PCIe docking state
- /* Thermal policy */
- Offset (0x14),
- ACTT, 8, // 0x14 - active trip point
- PSVT, 8, // 0x15 - passive trip point
- TC1V, 8, // 0x16 - passive trip point TC1
- TC2V, 8, // 0x17 - passive trip point TC2
- TSPV, 8, // 0x18 - passive trip point TSP
- CRTT, 8, // 0x19 - critical trip point
- DTSE, 8, // 0x1a - Digital Thermal Sensor enable
- DTS1, 8, // 0x1b - DT sensor 1
- DTS2, 8, // 0x1c - DT sensor 2
- /* Battery Support */
- Offset (0x1e),
- BNUM, 8, // 0x1e - number of batteries
- B0SC, 8, // 0x1f - BAT0 stored capacity
- B1SC, 8, // 0x20 - BAT1 stored capacity
- B2SC, 8, // 0x21 - BAT2 stored capacity
- B0SS, 8, // 0x22 - BAT0 stored status
- B1SS, 8, // 0x23 - BAT1 stored status
- B2SS, 8, // 0x24 - BAT2 stored status
- /* Processor Identification */
- Offset (0x28),
- APIC, 8, // 0x28 - APIC Enabled by coreboot
- MPEN, 8, // 0x29 - Multi Processor Enable
- PCP0, 8, // 0x2a - PDC CPU/CORE 0
- PCP1, 8, // 0x2b - PDC CPU/CORE 1
- PPCM, 8, // 0x2c - Max. PPC state
- /* Super I/O & CMOS config */
- Offset (0x32),
- NATP, 8, // 0x32 - ...
- /* Integrated Graphics Device */
- Offset (0x3c),
- IGDS, 8, // 0x3c - IGD state (primary = 1)
- TLST, 8, // 0x3d - Display Toggle List pointer
- CADL, 8, // 0x3e - Currently Attached Devices List
- PADL, 8, // 0x3f - Previously Attached Devices List
- CSTE, 16, // 0x40 - Current display state
- NSTE, 16, // 0x42 - Next display state
- SSTE, 16, // 0x44 - Set display state
- Offset (0x46),
- NDID, 8, // 0x46 - Number of Device IDs
- DID1, 32, // 0x47 - Device ID 1
- DID2, 32, // 0x4b - Device ID 2
- DID3, 32, // 0x4f - Device ID 3
- DID4, 32, // 0x53 - Device ID 4
- DID5, 32, // 0x57 - Device ID 5
- /* Backlight Control */
- Offset (0x64),
- BLCS, 8, // 0x64 - Backlight control possible?
- BRTL, 8, // 0x65 - Brightness Level
- ODDS, 8, // 0x66
- /* Ambient Light Sensors */
- Offset (0x6e),
- ALSE, 8, // 0x6e - ALS enable
- ALAF, 8, // 0x6f - Ambient light adjustment factor
- LLOW, 8, // 0x70 - LUX Low
- LHIH, 8, // 0x71 - LUX High
- /* EMA */
- Offset (0x78),
- EMAE, 8, // 0x78 - EMA enable
- EMAP, 16, // 0x79 - EMA pointer
- EMAL, 16, // 0x7b - EMA length
- /* MEF */
- Offset (0x82),
- MEFE, 8, // 0x82 - MEF enable
- /* TPM support */
- Offset (0x8c),
- TPMP, 8, // 0x8c - TPM
- TPME, 8, // 0x8d - TPM enable
- /* SATA */
- Offset (0x96),
- GTF0, 56, // 0x96 - GTF task file buffer for port 0
- GTF1, 56, // 0x9d - GTF task file buffer for port 1
- GTF2, 56, // 0xa4 - GTF task file buffer for port 2
- IDEM, 8, // 0xab - IDE mode (compatible / enhanced)
- IDET, 8, // 0xac - IDE
- /* IGD OpRegion */
- Offset (0xb4),
- ASLB, 32, // 0xb4 - IGD OpRegion Base Address
- IBTT, 8, // 0xb8 - IGD boot panel device
- IPAT, 8, // 0xb9 - IGD panel type cmos option
- ITVF, 8, // 0xba - IGD TV format cmos option
- ITVM, 8, // 0xbb - IGD TV minor format option
- IPSC, 8, // 0xbc - IGD panel scaling
- IBLC, 8, // 0xbd - IGD BLC config
- IBIA, 8, // 0xbe - IGD BIA config
- ISSC, 8, // 0xbf - IGD SSC config
- I409, 8, // 0xc0 - IGD 0409 modified settings
- I509, 8, // 0xc1 - IGD 0509 modified settings
- I609, 8, // 0xc2 - IGD 0609 modified settings
- I709, 8, // 0xc3 - IGD 0709 modified settings
- IDMM, 8, // 0xc4 - IGD DVMT Mode
- IDMS, 8, // 0xc5 - IGD DVMT memory size
- IF1E, 8, // 0xc6 - IGD function 1 enable
- HVCO, 8, // 0xc7 - IGD HPLL VCO
- NXD1, 32, // 0xc8 - IGD _DGS next DID1
- NXD2, 32, // 0xcc - IGD _DGS next DID2
- NXD3, 32, // 0xd0 - IGD _DGS next DID3
- NXD4, 32, // 0xd4 - IGD _DGS next DID4
- NXD5, 32, // 0xd8 - IGD _DGS next DID5
- NXD6, 32, // 0xdc - IGD _DGS next DID6
- NXD7, 32, // 0xe0 - IGD _DGS next DID7
- NXD8, 32, // 0xe4 - IGD _DGS next DID8
- /* Mainboard Specific (TODO move elsewhere) */
- Offset (0xf0),
- DOCK, 8, // 0xf0 - Docking Status
-}
diff --git a/src/soc/intel/sch/acpi/hostbridge.asl b/src/soc/intel/sch/acpi/hostbridge.asl
deleted file mode 100644
index 67bee8c37a..0000000000
--- a/src/soc/intel/sch/acpi/hostbridge.asl
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <arch/ioapic.h>
-
-Name(_HID,EISAID("PNP0A08")) // PCIe
-Name(_CID,EISAID("PNP0A03")) // PCI
-
-Name(_ADR, 0)
-Name(_BBN, 0)
-
-Device (MCHC)
-{
- Name(_ADR, 0x00000000) // 0:0.0
-
- OperationRegion(MCHP, PCI_Config, 0x00, 0x100)
- Field (MCHP, DWordAcc, NoLock, Preserve)
- {
- Offset (0x40), // EPBAR
- EPEN, 1, // Enable
- , 11, //
- EPBR, 20, // EPBAR
-
- Offset (0x44), // MCHBAR
- MHEN, 1, // Enable
- , 13, //
- MHBR, 18, // MCHBAR
-
- Offset (0x48), // PCIe BAR
- PXEN, 1, // Enable
- PXSZ, 2, // BAR size
- , 23, //
- PXBR, 6, // PCIe BAR
-
- Offset (0x4c), // DMIBAR
- DMEN, 1, // Enable
- , 11, //
- DMBR, 20, // DMIBAR
-
- // ...
-
- Offset (0x90), // PAM0
- , 4,
- PM0H, 2,
- , 2,
- Offset (0x91), // PAM1
- PM1L, 2,
- , 2,
- PM1H, 2,
- , 2,
- Offset (0x92), // PAM2
- PM2L, 2,
- , 2,
- PM2H, 2,
- , 2,
- Offset (0x93), // PAM3
- PM3L, 2,
- , 2,
- PM3H, 2,
- , 2,
- Offset (0x94), // PAM4
- PM4L, 2,
- , 2,
- PM4H, 2,
- , 2,
- Offset (0x95), // PAM5
- PM5L, 2,
- , 2,
- PM5H, 2,
- , 2,
- Offset (0x96), // PAM6
- PM6L, 2,
- , 2,
- PM6H, 2,
- , 2,
-
- Offset (0x9c), // Top of Low Used Memory
- , 3,
- TLUD, 5,
-
- Offset (0xa0), // Top of Used Memory
- TOM, 16,
- }
-
-}
-
-
-// Current Resource Settings
-Name (MCRS, ResourceTemplate()
-{
- // Bus Numbers
- WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
- 0x0000, 0x0000, 0x00ff, 0x0000, 0x0100,,, PB00)
-
- // IO Region 0
- DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
- 0x0000, 0x0000, 0x0cf7, 0x0000, 0x0cf8,,, PI00)
-
- // PCI Config Space
- Io (Decode16, 0x0cf8, 0x0cf8, 0x0001, 0x0008)
-
- // IO Region 1
- DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
- 0x0000, 0x0d00, 0xffff, 0x0000, 0xf300,,, PI01)
-
- // VGA memory (0xa0000-0xbffff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000a0000, 0x000bffff, 0x00000000,
- 0x00020000,,, ASEG)
-
- // OPROM reserved (0xc0000-0xc3fff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000c0000, 0x000c3fff, 0x00000000,
- 0x00004000,,, OPR0)
-
- // OPROM reserved (0xc4000-0xc7fff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000c4000, 0x000c7fff, 0x00000000,
- 0x00004000,,, OPR1)
-
- // OPROM reserved (0xc8000-0xcbfff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000c8000, 0x000cbfff, 0x00000000,
- 0x00004000,,, OPR2)
-
- // OPROM reserved (0xcc000-0xcffff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000cc000, 0x000cffff, 0x00000000,
- 0x00004000,,, OPR3)
-
- // OPROM reserved (0xd0000-0xd3fff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000d0000, 0x000d3fff, 0x00000000,
- 0x00004000,,, OPR4)
-
- // OPROM reserved (0xd4000-0xd7fff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000d4000, 0x000d7fff, 0x00000000,
- 0x00004000,,, OPR5)
-
- // OPROM reserved (0xd8000-0xdbfff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000d8000, 0x000dbfff, 0x00000000,
- 0x00004000,,, OPR6)
-
- // OPROM reserved (0xdc000-0xdffff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000dc000, 0x000dffff, 0x00000000,
- 0x00004000,,, OPR7)
-
- // BIOS Extension (0xe0000-0xe3fff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000e0000, 0x000e3fff, 0x00000000,
- 0x00004000,,, ESG0)
-
- // BIOS Extension (0xe4000-0xe7fff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000e4000, 0x000e7fff, 0x00000000,
- 0x00004000,,, ESG1)
-
- // BIOS Extension (0xe8000-0xebfff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000e8000, 0x000ebfff, 0x00000000,
- 0x00004000,,, ESG2)
-
- // BIOS Extension (0xec000-0xeffff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000ec000, 0x000effff, 0x00000000,
- 0x00004000,,, ESG3)
-
- // System BIOS (0xf0000-0xfffff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x000f0000, 0x000fffff, 0x00000000,
- 0x00010000,,, FSEG)
-
- // PCI Memory Region (Top of memory-0xfebfffff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0x00000000, 0xfebfffff, 0x00000000,
- IO_APIC_ADDR,,, PM01)
-
- // TPM Area (0xfed40000-0xfed44fff)
- DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000, 0xfed40000, 0xfed44fff, 0x00000000,
- 0x00005000,,, TPMR)
-})
-
-Method (_CRS, 0, Serialized)
-{
- // Find PCI resource area in MCRS
- CreateDwordField(MCRS, ^PM01._MIN, PMIN)
- CreateDwordField(MCRS, ^PM01._MAX, PMAX)
- CreateDwordField(MCRS, ^PM01._LEN, PLEN)
-
- // Fix up PCI memory region:
- // Enter actual TOLUD. The TOLUD register contains bits 27-31 of
- // the top of memory address.
- ShiftLeft (^MCHC.TLUD, 27, PMIN)
- Add(Subtract(PMAX, PMIN), 1, PLEN)
-
- Return (MCRS)
-}
-
-/* IRQ assignment is mainboard specific. Get it from mainboard ACPI code */
-#include "acpi/northbridge_pci_irqs.asl"
diff --git a/src/soc/intel/sch/acpi/igd.asl b/src/soc/intel/sch/acpi/igd.asl
deleted file mode 100644
index dcc782f0b8..0000000000
--- a/src/soc/intel/sch/acpi/igd.asl
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-Device (GFX0)
-{
- Name (_ADR, 0x00020000)
-
- OperationRegion (GFXC, PCI_Config, 0x00, 0x0100)
- Field (GFXC, DWordAcc, NoLock, Preserve)
- {
- Offset (0x10),
- BAR0, 64
- }
-
- OperationRegion (GFRG, SystemMemory, And(BAR0, 0xfffffffffffffff0), 0x400000)
- Field (GFRG, DWordAcc, NoLock, Preserve)
- {
- Offset (0x61250),
- CR1, 32,
- BCLV, 16,
- BCLM, 16,
- }
-
- Name (BRIG, Package (0x12)
- {
- 0x61,
- 0x61,
- 0x2,
- 0x4,
- 0x5,
- 0x7,
- 0x9,
- 0xb,
- 0xd,
- 0x11,
- 0x14,
- 0x17,
- 0x1c,
- 0x20,
- 0x27,
- 0x31,
- 0x41,
- 0x61,
- })
-
- Method (XBCM, 1, NotSerialized)
- {
- Store (ShiftLeft (Arg0, 4), BCLV)
- Store (0x80000000, CR1)
- Store (0x0610, BCLM)
- }
-
- Method (XBQC, 0, NotSerialized)
- {
- Store (BCLV, Local0)
- ShiftRight (Local0, 4, Local0)
- Return (Local0)
- }
-#include <drivers/intel/gma/acpi/common.asl>
-}
diff --git a/src/soc/intel/sch/acpi/irqlinks.asl b/src/soc/intel/sch/acpi/irqlinks.asl
deleted file mode 100644
index 2d029242d8..0000000000
--- a/src/soc/intel/sch/acpi/irqlinks.asl
+++ /dev/null
@@ -1,487 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-Device (LNKA)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 1)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTA)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 10, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLA, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLA, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTA
- ShiftLeft(1, And(PRTA, 0x0f), IRQ0)
-
- Return (RTLA)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTA)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTA, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKB)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 2)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTB)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 11, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLB, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLB, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTB
- ShiftLeft(1, And(PRTB, 0x0f), IRQ0)
-
- Return (RTLB)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTB)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTB, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKC)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 3)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTC)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 10, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLC, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLC, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTC
- ShiftLeft(1, And(PRTC, 0x0f), IRQ0)
-
- Return (RTLC)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTC)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTC, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKD)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 4)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTD)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 11, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLD, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLD, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTD
- ShiftLeft(1, And(PRTD, 0x0f), IRQ0)
-
- Return (RTLD)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTD)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTD, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKE)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 5)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTE)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 10, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLE, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLE, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTE
- ShiftLeft(1, And(PRTE, 0x0f), IRQ0)
-
- Return (RTLE)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTE)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTE, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKF)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 6)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTF)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 11, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLF, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLF, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTF
- ShiftLeft(1, And(PRTF, 0x0f), IRQ0)
-
- Return (RTLF)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTF)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTF, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKG)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 7)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTG)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 10, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLG, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLG, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTG
- ShiftLeft(1, And(PRTG, 0x0f), IRQ0)
-
- Return (RTLG)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTG)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTG, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
-
-Device (LNKH)
-{
- Name (_HID, EISAID("PNP0C0F"))
- Name (_UID, 8)
-
- // Disable method
- Method (_DIS, 0, Serialized)
- {
- Store (0x80, PRTH)
- }
-
- // Possible Resource Settings for this Link
- Name (_PRS, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared)
- { 3, 4, 5, 6, 7, 11, 12, 14, 15 }
- })
-
- // Current Resource Settings for this link
- Method (_CRS, 0, Serialized)
- {
- Name (RTLH, ResourceTemplate()
- {
- IRQ(Level, ActiveLow, Shared) {}
- })
- CreateWordField(RTLH, 1, IRQ0)
-
- // Clear the WordField
- Store (Zero, IRQ0)
-
- // Set the bit from PRTH
- ShiftLeft(1, And(PRTH, 0x0f), IRQ0)
-
- Return (RTLH)
- }
-
- // Set Resource Setting for this IRQ link
- Method (_SRS, 1, Serialized)
- {
- CreateWordField(Arg0, 1, IRQ0)
-
- // Which bit is set?
- FindSetRightBit(IRQ0, Local0)
-
- Decrement(Local0)
- Store(Local0, PRTH)
- }
-
- // Status
- Method (_STA, 0, Serialized)
- {
- If(And(PRTH, 0x80)) {
- Return (0x9)
- } Else {
- Return (0xb)
- }
- }
-}
diff --git a/src/soc/intel/sch/acpi/lpc.asl b/src/soc/intel/sch/acpi/lpc.asl
deleted file mode 100644
index 518bdaef8e..0000000000
--- a/src/soc/intel/sch/acpi/lpc.asl
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-// Intel LPC Bus Device - 0:1f.0
-
-Device (LPCB)
-{
- Name(_ADR, 0x001f0000)
-
- OperationRegion(LPC0, PCI_Config, 0x00, 0x100)
- Field (LPC0, AnyAcc, NoLock, Preserve)
- {
- Offset (0x40),
- PMBS, 16, // PMBASE
- Offset (0x60), // Interrupt Routing Registers
- PRTA, 8,
- PRTB, 8,
- PRTC, 8,
- PRTD, 8,
- Offset (0x68),
- PRTE, 8,
- PRTF, 8,
- PRTG, 8,
- PRTH, 8,
-
- Offset (0x80), // IO Decode Ranges
- IOD0, 8,
- IOD1, 8,
-
- Offset (0xf0), // RCBA
- RCEN, 1,
- , 13,
- RCBA, 18,
- }
-
-// #include "irqlinks.asl"
- #include "irqlinks.asl"
-
- #include "acpi/ec.asl"
-
- Device (DMAC) // DMA Controller
- {
- Name(_HID, EISAID("PNP0200"))
- Name(_CRS, ResourceTemplate()
- {
- IO (Decode16, 0x00, 0x00, 0x01, 0x20)
- IO (Decode16, 0x81, 0x81, 0x01, 0x11)
- IO (Decode16, 0x93, 0x93, 0x01, 0x0d)
- IO (Decode16, 0xc0, 0xc0, 0x01, 0x20)
- DMA (Compatibility, NotBusMaster, Transfer8_16) { 4 }
- })
- }
-
- Device (FWH) // Firmware Hub
- {
- Name (_HID, EISAID("INT0800"))
- Name (_CRS, ResourceTemplate()
- {
- Memory32Fixed(ReadOnly, 0xff000000, 0x01000000)
- })
- }
-
- Device (HPET)
- {
- Name (_HID, EISAID("PNP0103"))
- Name (_CID, 0x010CD041)
-
- Name(BUF0, ResourceTemplate()
- {
- Memory32Fixed(ReadOnly, 0xfed00000, 0x400, FED0)
- })
-
- Method (_STA, 0) // Device Status
- {
- If (HPTE) {
- // Note: Ancient versions of Windows don't want
- // to see the HPET in order to work right
- If (LGreaterEqual(OSYS, 2001)) {
- Return (0xf) // Enable and show device
- } Else {
- Return (0xb) // Enable and don't show device
- }
- }
-
- Return (0x0) // Not enabled, don't show.
- }
-
- Method (_CRS, 0, Serialized) // Current resources
- {
- If (HPTE) {
- CreateDWordField(BUF0, \_SB.PCI0.LPCB.HPET.FED0._BAS, HPT0)
- If (Lequal(HPAS, 1)) {
- Store(0xfed01000, HPT0)
- }
-
- If (Lequal(HPAS, 2)) {
- Store(0xfed02000, HPT0)
- }
-
- If (Lequal(HPAS, 3)) {
- Store(0xfed03000, HPT0)
- }
- }
-
- Return (BUF0)
- }
- }
-
- Device(PIC) // 8259 Interrupt Controller
- {
- Name(_HID,EISAID("PNP0000"))
- Name(_CRS, ResourceTemplate()
- {
- IO (Decode16, 0x20, 0x20, 0x01, 0x02)
- IO (Decode16, 0x24, 0x24, 0x01, 0x02)
- IO (Decode16, 0x28, 0x28, 0x01, 0x02)
- IO (Decode16, 0x2c, 0x2c, 0x01, 0x02)
- IO (Decode16, 0x30, 0x30, 0x01, 0x02)
- IO (Decode16, 0x34, 0x34, 0x01, 0x02)
- IO (Decode16, 0x38, 0x38, 0x01, 0x02)
- IO (Decode16, 0x3c, 0x3c, 0x01, 0x02)
- IO (Decode16, 0xa0, 0xa0, 0x01, 0x02)
- IO (Decode16, 0xa4, 0xa4, 0x01, 0x02)
- IO (Decode16, 0xa8, 0xa8, 0x01, 0x02)
- IO (Decode16, 0xac, 0xac, 0x01, 0x02)
- IO (Decode16, 0xb0, 0xb0, 0x01, 0x02)
- IO (Decode16, 0xb4, 0xb4, 0x01, 0x02)
- IO (Decode16, 0xb8, 0xb8, 0x01, 0x02)
- IO (Decode16, 0xbc, 0xbc, 0x01, 0x02)
- IO (Decode16, 0x4d0, 0x4d0, 0x01, 0x02)
- IRQNoFlags () { 2 }
- })
- }
-
- Device(MATH) // FPU
- {
- Name (_HID, EISAID("PNP0C04"))
- Name (_CRS, ResourceTemplate()
- {
- IO (Decode16, 0xf0, 0xf0, 0x01, 0x01)
- IRQNoFlags() { 13 }
- })
- }
-
- Device(LDRC) // LPC device: Resource consumption
- {
- Name (_HID, EISAID("PNP0C02"))
- Name (_UID, 2)
- Name (_CRS, ResourceTemplate()
- {
- IO (Decode16, 0x2e, 0x2e, 0x1, 0x02) // First SuperIO
- IO (Decode16, 0x4e, 0x4e, 0x1, 0x02) // Second SuperIO
- IO (Decode16, 0x61, 0x61, 0x1, 0x01) // NMI Status
- IO (Decode16, 0x63, 0x63, 0x1, 0x01) // CPU Reserved
- IO (Decode16, 0x65, 0x65, 0x1, 0x01) // CPU Reserved
- IO (Decode16, 0x67, 0x67, 0x1, 0x01) // CPU Reserved
- IO (Decode16, 0x80, 0x80, 0x1, 0x01) // Port 80 Post
- IO (Decode16, 0x92, 0x92, 0x1, 0x01) // CPU Reserved
- IO (Decode16, 0xb2, 0xb2, 0x1, 0x02) // SWSMI
- // IO (Decode16, 0x680, 0x680, 0x1, 0x70) // IO ???
- IO (Decode16, 0x800, 0x800, 0x1, 0x10) // ACPI I/O trap
- IO (Decode16, 0x0500, 0x0500, 0x1, 0x80) // ICH7-M ACPI
- IO (Decode16, 0x0480, 0x0480, 0x1, 0x40) // ICH7-M GPIO
- // IO (Decode16, 0x1640, 0x1640, 0x1, 0x10) // IO ???
- })
- }
-
- Device (RTC) // Real Time Clock
- {
- Name (_HID, EISAID("PNP0B00"))
- Name (_CRS, ResourceTemplate()
- {
- IO (Decode16, 0x70, 0x70, 1, 8)
- IRQNoFlags() { 8 }
- })
- }
-
- Device (TIMR) // Intel 8254 timer
- {
- Name(_HID, EISAID("PNP0100"))
- Name(_CRS, ResourceTemplate()
- {
- IO (Decode16, 0x40, 0x40, 0x01, 0x04)
- IO (Decode16, 0x50, 0x50, 0x10, 0x04)
- IRQNoFlags() {0}
- })
- }
-
- #include "acpi/superio.asl"
-
- Device (PS2K) // Keyboard
- {
- Name(_HID, EISAID("PNP0303"))
- Name(_CID, EISAID("PNP030B"))
-
- Name(_CRS, ResourceTemplate()
- {
- IO (Decode16, 0x60, 0x60, 0x01, 0x01)
- IO (Decode16, 0x64, 0x64, 0x01, 0x01)
- IRQ (Edge, ActiveHigh, Exclusive) { 0x01 } // IRQ 1
- })
-
- Method (_STA, 0)
- {
- Return (0xf)
- }
- }
-
- Device (PS2M) // Mouse
- {
- Name(_HID, EISAID("PNP0F13"))
- Name(_CRS, ResourceTemplate()
- {
- IRQ (Edge, ActiveHigh, Exclusive) { 0x0c } // IRQ 12
- })
-
- Method(_STA, 0)
- {
- Return (0xf)
- }
- }
-
- Device (FDC0) // Floppy controller
- {
- Name (_HID, EisaId ("PNP0700"))
- Method (_STA, 0, NotSerialized)
- {
- Return (0x0f) // FIXME
- }
-
- Name(_CRS, ResourceTemplate()
- {
- IO (Decode16, 0x03F0, 0x03F0, 0x01, 0x06)
- IO (Decode16, 0x03F7, 0x03F7, 0x01, 0x01)
- IRQNoFlags () {6}
- DMA (Compatibility, NotBusMaster, Transfer8) {2}
- })
-
- Name(_PRS, ResourceTemplate()
- {
- IO (Decode16, 0x03F0, 0x03F0, 0x01, 0x06)
- IO (Decode16, 0x03F7, 0x03F7, 0x01, 0x01)
- IRQNoFlags () {6}
- DMA (Compatibility, NotBusMaster, Transfer8) {2}
- })
-
- }
-}
diff --git a/src/soc/intel/sch/acpi/pata.asl b/src/soc/intel/sch/acpi/pata.asl
deleted file mode 100644
index 3d37b672df..0000000000
--- a/src/soc/intel/sch/acpi/pata.asl
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-// Intel PATA Controller 0:1f.1
-
-Device (PATA)
-{
- Name (_ADR, 0x001f0001)
-
- Device (PRID)
- {
- Name (_ADR, 0)
-
- // Get Timing Mode
- Method (_GTM)
- {
- Name(PBUF, Buffer(20) {
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x00,0x00,0x00,0x00 })
-
- CreateDwordField (PBUF, 0, PIO0)
- CreateDwordField (PBUF, 4, DMA0)
- CreateDwordField (PBUF, 8, PIO1)
- CreateDwordField (PBUF, 12, DMA1)
- CreateDwordField (PBUF, 16, FLAG)
-
- // TODO fill return structure
-
- Return (PBUF)
- }
-
- // Set Timing Mode
- Method (_STM, 3)
- {
- CreateDwordField (Arg0, 0, PIO0)
- CreateDwordField (Arg0, 4, DMA0)
- CreateDwordField (Arg0, 8, PIO1)
- CreateDwordField (Arg0, 12, DMA1)
- CreateDwordField (Arg0, 16, FLAG)
-
- // TODO: Do the deed
- }
-
- Device (DSK0)
- {
- Name (_ADR, 0)
- // TODO: _RMV ?
- // TODO: _GTF ?
- }
-
- Device (DSK1)
- {
- Name (_ADR, 1)
-
- // TODO: _RMV ?
- // TODO: _GTF ?
- }
-
- }
-}
diff --git a/src/soc/intel/sch/acpi/pci.asl b/src/soc/intel/sch/acpi/pci.asl
deleted file mode 100644
index d1b0e8be42..0000000000
--- a/src/soc/intel/sch/acpi/pci.asl
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-// Intel PCI to PCI bridge 0:1e.0
-
-Device (PCIB)
-{
- Name (_ADR, 0x001e0000)
-
- Device (SLT1)
- {
- Name (_ADR, 0x00000000)
- Name (_PRW, Package(){ 11, 4 })
- }
-
- Device (SLT2)
- {
- Name (_ADR, 0x00010000)
- Name (_PRW, Package(){ 11, 4 })
- }
-
- Device (SLT3)
- {
- Name (_ADR, 0x00020000)
- Name (_PRW, Package(){ 11, 4 })
- }
-
- Device (SLT6)
- {
- Name (_ADR, 0x00050000)
- Name (_PRW, Package(){ 11, 4 })
- }
-
- Device (LANC)
- {
- Name (_ADR, 0x00080000)
- Name (_PRW, Package(){ 11, 3 })
- }
-
- Device (LANR)
- {
- Name (_ADR, 0x00000000)
- Name (_PRW, Package(){ 11, 3 })
- }
-
- // TODO: How many slots, where?
-
- // PCI Interrupt Routing.
- // If PICM is set, interrupts are routed over the i8259, otherwise
- // over the IOAPIC. (Really? If they're above 15 they need to be routed
- // fixed over the IOAPIC?)
-
- Method (_PRT)
- {
- #include "acpi/southbridge_pci_irqs.asl"
- }
-
-}
diff --git a/src/soc/intel/sch/acpi/pcie.asl b/src/soc/intel/sch/acpi/pcie.asl
deleted file mode 100644
index 3c644e2311..0000000000
--- a/src/soc/intel/sch/acpi/pcie.asl
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* Intel i82801G PCIe support */
-
-// PCI Express Ports
-
-Device (RP01)
-{
- NAME(_ADR, 0x001c0000) // FIXME: Have a macro for PCI Devices -> ACPI notation?
- //#include "pcie_port.asl"
- Method(_PRT)
- {
- If (PICM) {
- Return (Package() {
- Package() { 0x0000ffff, 0, 0, 16 },
- Package() { 0x0000ffff, 1, 0, 17 },
- Package() { 0x0000ffff, 2, 0, 18 },
- Package() { 0x0000ffff, 3, 0, 19 }
- })
- } Else {
- Return (Package() {
- Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
- Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 },
- Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }
- })
-
- }
-
- }
-}
-
-Device (RP02)
-{
- NAME(_ADR, 0x001c0001) // FIXME: Have a macro for PCI Devices -> ACPI notation?
- //#include "pcie_port.asl"
- Method(_PRT)
- {
- If (PICM) {
- Return (Package() {
- Package() { 0x0000ffff, 0, 0, 17 },
- Package() { 0x0000ffff, 1, 0, 18 },
- Package() { 0x0000ffff, 2, 0, 19 },
- Package() { 0x0000ffff, 3, 0, 16 }
- })
- } Else {
- Return (Package() {
- Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKB, 0 },
- Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKD, 0 },
- Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKA, 0 }
- })
-
- }
-
- }
-}
-
-
-Device (RP03)
-{
- NAME(_ADR, 0x001c0002) // FIXME: Have a macro for PCI Devices -> ACPI notation?
- //#include "pcie_port.asl"
- Method(_PRT)
- {
- If (PICM) {
- Return (Package() {
- Package() { 0x0000ffff, 0, 0, 18 },
- Package() { 0x0000ffff, 1, 0, 19 },
- Package() { 0x0000ffff, 2, 0, 16 },
- Package() { 0x0000ffff, 3, 0, 17 }
- })
- } Else {
- Return (Package() {
- Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKD, 0 },
- Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKA, 0 },
- Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKB, 0 }
- })
-
- }
-
- }
-}
-
-
-Device (RP04)
-{
- NAME(_ADR, 0x001c0003) // FIXME: Have a macro for PCI Devices -> ACPI notation?
- //#include "pcie_port.asl"
- Method(_PRT)
- {
- If (PICM) {
- Return (Package() {
- Package() { 0x0000ffff, 0, 0, 19 },
- Package() { 0x0000ffff, 1, 0, 16 },
- Package() { 0x0000ffff, 2, 0, 17 },
- Package() { 0x0000ffff, 3, 0, 18 }
- })
- } Else {
- Return (Package() {
- Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKD, 0 },
- Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKA, 0 },
- Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKB, 0 },
- Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKC, 0 }
- })
-
- }
-
- }
-}
-
-
-Device (RP05)
-{
- NAME(_ADR, 0x001c0004) // FIXME: Have a macro for PCI Devices -> ACPI notation?
- //#include "pcie_port.asl"
- Method(_PRT)
- {
- If (PICM) {
- Return (Package() {
- Package() { 0x0000ffff, 0, 0, 16 },
- Package() { 0x0000ffff, 1, 0, 17 },
- Package() { 0x0000ffff, 2, 0, 18 },
- Package() { 0x0000ffff, 3, 0, 19 }
- })
- } Else {
- Return (Package() {
- Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
- Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 },
- Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }
- })
-
- }
-
- }
-}
-
-
-Device (RP06)
-{
- NAME(_ADR, 0x001c0005) // FIXME: Have a macro for PCI Devices -> ACPI notation?
- //#include "pcie_port.asl"
- Method(_PRT)
- {
- If (PICM) {
- Return (Package() {
- Package() { 0x0000ffff, 0, 0, 17 },
- Package() { 0x0000ffff, 1, 0, 18 },
- Package() { 0x0000ffff, 2, 0, 19 },
- Package() { 0x0000ffff, 3, 0, 16 }
- })
- } Else {
- Return (Package() {
- Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKB, 0 },
- Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKD, 0 },
- Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKA, 0 }
- })
-
- }
-
- }
-}
diff --git a/src/soc/intel/sch/acpi/peg.asl b/src/soc/intel/sch/acpi/peg.asl
deleted file mode 100644
index 227ca27004..0000000000
--- a/src/soc/intel/sch/acpi/peg.asl
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-Device (PEGP)
-{
- Name (_ADR, 0x00010000)
-
- // PCI Interrupt Routing.
- Method (_PRT)
- {
- If (PICM) {
- Return (Package() {
- Package() { 0x0000ffff, 0, 0, 16 },
- Package() { 0x0000ffff, 1, 0, 17 },
- Package() { 0x0000ffff, 2, 0, 18 },
- Package() { 0x0000ffff, 3, 0, 19 }
- })
- } Else {
- Return (Package() {
- Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
- Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 },
- Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
- Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }
- })
- }
-
- }
-}
diff --git a/src/soc/intel/sch/acpi/sch.asl b/src/soc/intel/sch/acpi/sch.asl
deleted file mode 100644
index 9816e7783c..0000000000
--- a/src/soc/intel/sch/acpi/sch.asl
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include "hostbridge.asl"
-
-/* PCI Device Resource Consumption */
-Device (PDRC)
-{
- Name (_HID, EISAID("PNP0C02"))
- Name (_UID, 1)
-
- // This does not seem to work correctly yet - set values statically for
- // now.
-
- //Name (PDRS, ResourceTemplate() {
- // Memory32Fixed(ReadWrite, 0x00000000, 0x00004000, RCRB) // RCBA
- // Memory32Fixed(ReadWrite, 0x00000000, 0x00004000, MCHB) // MCHBAR
- // Memory32Fixed(ReadWrite, 0x00000000, 0x00001000, DMIB) // DMIBAR
- // Memory32Fixed(ReadWrite, 0x00000000, 0x00001000, EGPB) // EPBAR
- // Memory32Fixed(ReadWrite, 0x00000000, 0x00000000, PCIE) // PCIE BAR
- // Memory32Fixed(ReadWrite, 0xfed20000, 0x00070000, ICHB) // Misc ICH
- //})
-
- Name (PDRS, ResourceTemplate() {
- Memory32Fixed(ReadWrite, 0xfed1c000, 0x00004000) // RCBA
- Memory32Fixed(ReadWrite, 0xfed14000, 0x00004000) // MCHBAR
- Memory32Fixed(ReadWrite, 0xfed18000, 0x00001000) // DMIBAR
- Memory32Fixed(ReadWrite, 0xfed19000, 0x00001000) // EPBAR
- Memory32Fixed(ReadWrite, 0xf0000000, 0x04000000) // PCIE BAR
- Memory32Fixed(ReadWrite, 0xfed20000, 0x00020000) // Misc ICH
- Memory32Fixed(ReadWrite, 0xfed40000, 0x00005000) // Misc ICH
- Memory32Fixed(ReadWrite, 0xfed45000, 0x0004b000) // Misc ICH
- })
-
- // Current Resource Settings
- Method (_CRS, 0, Serialized)
- {
- //CreateDwordField(PDRS, ^RCRB._BAS, RBR0)
- //ShiftLeft(\_SB.PCI0.LPCB.RCBA, 14, RBR0)
-
- //CreateDwordField(PDRS, ^MCHB._BAS, MBR0)
- //ShiftLeft(\_SB.PCI0.MCHC.MHBR, 14, MBR0)
-
- //CreateDwordField(PDRS, ^DMIB._BAS, DBR0)
- //ShiftLeft(\_SB.PCI0.MCHC.DMBR, 12, DBR0)
-
- //CreateDwordField(PDRS, ^EGPB._BAS, EBR0)
- //ShiftLeft(\_SB.PCI0.MCHC.EPBR, 12, EBR0)
-
- //CreateDwordField(PDRS, ^PCIE._BAS, PBR0)
- //ShiftLeft(\_SB.PCI0.MCHC.PXBR, 26, PBR0)
-
- //CreateDwordField(PDRS, ^PCIE._LEN, PSZ0)
- //ShiftLeft(0x10000000, \_SB.PCI0.MCHC.PXSZ, PSZ0)
-
- Return(PDRS)
- }
-}
-
-// PCIe graphics port 0:1.0
-#include "peg.asl"
-
-// Integrated graphics 0:2.0
-#include "igd.asl"
-
-/* Intel PCH support */
-
-Scope(\)
-{
- // IO-Trap at 0x800. This is the ACPI->SMI communication interface.
-
- OperationRegion(IO_T, SystemIO, 0x800, 0x10)
- Field(IO_T, ByteAcc, NoLock, Preserve)
- {
- Offset(0x8),
- TRP0, 8 // IO-Trap at 0x808
- }
-
- // ICH7 Power Management Registers, located at PMBASE (0x1f.0 0x40.l)
- // this doesn't work as ACPI initializes regions and packages first, devices second.
- // use dynamic operation region? if so, how? XXX
- //OperationRegion(PMIO, SystemIO, And(\_SB_.PCI0.LPCB.PMBS, 0xfffc), 0x80)
- OperationRegion(PMIO, SystemIO, 0x500, 0x80)
- Field(PMIO, ByteAcc, NoLock, Preserve)
- {
- Offset(0x42), // General Purpose Control
- , 1, // skip 1 bit
- GPEC, 1, // TCO status
- , 9, // skip 9 more bits
- SCIS, 1, // TCO DMI status
- , 6 // To the end of the word
- }
-
- // ICH7 GPIO IO mapped registers (0x1f.0 reg 0x48.l)
- OperationRegion(GPIO, SystemIO, 0x1180, 0x3c)
- Field(GPIO, ByteAcc, NoLock, Preserve)
- {
- Offset(0x00), // GPIO Use Select
- GU00, 8,
- GU01, 8,
- GU02, 8,
- GU03, 8,
- Offset(0x04), // GPIO IO Select
- GIO0, 8,
- GIO1, 8,
- GIO2, 8,
- GIO3, 8,
- Offset(0x0c), // GPIO Level
- GL00, 8,
- GL01, 8,
- , 3,
- GP27, 1, // SATA_PWR_EN #0
- GP28, 1, // SATA_PWR_EN #1
- , 3,
- Offset(0x18), // GPIO Blink
- GB00, 8,
- GB01, 8,
- GB02, 8,
- GB03, 8,
- Offset(0x2c), // GPIO Invert
- GIV0, 8,
- GIV1, 8,
- GIV2, 8,
- GIV3, 8,
- Offset(0x30), // GPIO Use Select 2
- GU04, 8,
- GU05, 8,
- GU06, 8,
- GU07, 8,
- Offset(0x34), // GPIO IO Select 2
- GIO4, 8,
- GIO5, 8,
- GIO6, 8,
- GIO7, 8,
- Offset(0x38), // GPIO Level 2
- , 5,
- GP37, 1, // PATA_PWR_EN
- GP38, 1, // Battery / Power (?)
- GP39, 1, // ??
- GL05, 8,
- GL06, 8,
- GL07, 8
- }
-
-
- // ICH7 Root Complex Register Block. Memory Mapped through RCBA)
- OperationRegion(RCRB, SystemMemory, 0xfed1c000, 0x4000)
- Field(RCRB, DWordAcc, Lock, Preserve)
- {
- Offset(0x0000), // Backbone
- Offset(0x1000), // Chipset
- Offset(0x3000), // Legacy Configuration Registers
- Offset(0x3404), // High Performance Timer Configuration
- HPAS, 2, // Address Select
- , 5,
- HPTE, 1, // Address Enable
- Offset(0x3418), // FD (Function Disable)
- , 1, // Reserved
- PATD, 1, // PATA disable
- SATD, 1, // SATA disable
- SMBD, 1, // SMBUS disable
- HDAD, 1, // Azalia disable
- A97D, 1, // AC'97 disable
- M97D, 1, // AC'97 disable
- ILND, 1, // Internal LAN disable
- US1D, 1, // UHCI #1 disable
- US2D, 1, // UHCI #2 disable
- US3D, 1, // UHCI #3 disable
- US4D, 1, // UHCI #4 disable
- , 2, // Reserved
- LPBD, 1, // LPC bridge disable
- EHCD, 1, // EHCI disable
- Offset(0x341a), // FD Root Ports
- RP1D, 1, // Root Port 1 disable
- RP2D, 1, // Root Port 2 disable
- RP3D, 1, // Root Port 3 disable
- RP4D, 1, // Root Port 4 disable
- RP5D, 1, // Root Port 5 disable
- RP6D, 1 // Root Port 6 disable
- }
-
-}
-
-// 0:1b.0 High Definition Audio (Azalia)
-#include "audio.asl"
-
-// PCI Express Ports
-#include "pcie.asl"
-
-// USB
-#include "usb.asl"
-
-// PCI Bridge
-#include "pci.asl"
-
-// AC97 Audio and Modem
-#include "ac97.asl"
-
-// LPC Bridge
-#include "lpc.asl"
-
-// PATA
-#include "pata.asl"
-
-// SMBus
-#include "smbus.asl"
diff --git a/src/soc/intel/sch/acpi/sleepstates.asl b/src/soc/intel/sch/acpi/sleepstates.asl
deleted file mode 100644
index c05835ac3c..0000000000
--- a/src/soc/intel/sch/acpi/sleepstates.asl
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-Name(\_S0, Package(4){0x0,0x0,0,0})
-Name(\_S1, Package(4){0x1,0x0,0,0})
-Name(\_S3, Package(4){0x5,0x0,0,0})
-Name(\_S4, Package(4){0x6,0x0,0,0})
-Name(\_S5, Package(4){0x7,0x0,0,0})
diff --git a/src/soc/intel/sch/acpi/smbus.asl b/src/soc/intel/sch/acpi/smbus.asl
deleted file mode 100644
index 3354b03c4b..0000000000
--- a/src/soc/intel/sch/acpi/smbus.asl
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-// Intel SMBus Controller 0:1f.3
-
-Device (SBUS)
-{
- Name (_ADR, 0x001f0003)
-
- OperationRegion (SMBP, PCI_Config, 0x00, 0x100)
- Field(SMBP, DWordAcc, NoLock, Preserve)
- {
- Offset(0x40),
- , 2,
- I2CE, 1
- }
-
- /*
- OperationRegion (SMBI, SystemIO, 0x400, 0x20)
- Field (SMBI, ByteAcc, NoLock, Preserve)
- {
- HSTS, 8, // Host Status
- , 8,
- HCNT, 8, // Host Control
- HCMD, 8, // Host Command
- TXSA, 8, // Transmit Slave Address
- DAT0, 8, // Host Data 0
- DAT1, 8, // Host Data 1
- HBDB, 8, // Host Block Data Byte
- PECK, 8, // Packet Error Check
- RXSA, 8, // Receive Slave Address
- RXDA, 16, // Receive Slave Data
- AUXS, 8, // Auxiliary Status
- AUXC, 8, // Auxiliary Control
- SLPC, 8, // SMLink Pin Control
- SBPC, 8, // SMBus Pin Control
- SSTS, 8, // Slave Status
- SCMD, 8, // Slave Command
- NADR, 8, // Notify Device Address
- NDLB, 8, // Notify Data Low Byte
- NDLH, 8, // Notify Data High Byte
- }
-
- // Kill all SMBus communication
- Method (KILL, 0, Serialized)
- {
- Or (HCNT, 0x02, HCNT) // Send Kill
- Or (HSTS, 0xff, HSTS) // Clean Status
- }
-
- // Check if last operation completed
- // return Failure = 0, Success = 1
- Method (CMPL, 0, Serialized)
- {
- Store (4000, Local0) // Timeout 200ms in 50us steps
- While (Local0) {
- If (And(HSTS, 0x02)) { // Completion Status?
- Return (1) // Operation Completed
- } Else {
- Stall (50)
- Decrement (Local0)
- If (LEqual(Local0, 0)) {
- KILL()
- }
- }
- }
-
- Return (0) // Failure
- }
-
-
- // Wait for SMBus to become ready
- Method (SRDY, 0, Serialized)
- {
- Store (200, Local0) // Timeout 200ms
- While (Local0) {
- If (And(HSTS, 0x40)) { // IN_USE?
- Sleep(1) // Wait 1ms
- Decrement(Local0) // timeout--
- If (LEqual(Local0, 0)) {
- Return (1)
- }
- } Else {
- Store (0, Local0) // We're ready
- }
- }
-
- Store (4000, Local0) // Timeout 200ms (50us * 4000)
- While (Local0) {
- If (And (HSTS, 0x01)) { // Host Busy?
- Stall(50) // Wait 50us
- Decrement(Local0) // timeout--
- If (LEqual(Local0, 0)) {
- KILL()
- }
- } Else {
- Return (0) // Success
- }
- }
-
- Return (1) // Failure
- }
-
- // SMBus Send Byte
- // Arg0: Address
- // Arg1: Data
- // Return: 1 = Success, 0=Failure
-
- Method (SSXB, 2, Serialized)
- {
-
- // Is the SMBus Controller Ready?
- If (SRDY()) {
- Return (0)
- }
-
- // Send Byte
- Store (0, I2CE) // SMBus Enable
- Store (0xbf, HSTS)
- Store (Arg0, TXSA) // Write Address
- Store (Arg1, HCMD) // Write Data
-
- Store (0x48, HCNT) // Start + Byte Data Protocol
-
- If (CMPL()) {
- Or (HSTS, 0xff, HSTS) // Clean up
- Return (1) // Success
- }
-
- Return (0)
- }
-
-
- // SMBus Receive Byte
- // Arg0: Address
- // Return: 0xffff = Failure, Data (8bit) = Success
-
- Method (SRXB, 2, Serialized)
- {
-
- // Is the SMBus Controller Ready?
- If (SRDY()) {
- Return (0xffff)
- }
-
- // Receive Byte
- Store (0, I2CE) // SMBus Enable
- Store (0xbf, HSTS)
- Store (Or (Arg0, 1), TXSA) // Write Address
-
- Store (0x44, HCNT) // Start
-
- If (CMPL()) {
- Or (HSTS, 0xff, HSTS) // Clean up
- Return (DAT0) // Success
- }
-
- Return (0xffff)
- }
-
-
- // SMBus Write Byte
- // Arg0: Address
- // Arg1: Command
- // Arg2: Data
- // Return: 1 = Success, 0=Failure
-
- Method (SWRB, 3, Serialized)
- {
-
- // Is the SMBus Controller Ready?
- If (SRDY()) {
- Return (0)
- }
-
- // Send Byte
- Store (0, I2CE) // SMBus Enable
- Store (0xbf, HSTS)
- Store (Arg0, TXSA) // Write Address
- Store (Arg1, HCMD) // Write Command
- Store (Arg2, DAT0) // Write Data
-
- Store (0x48, HCNT) // Start + Byte Protocol
-
- If (CMPL()) {
- Or (HSTS, 0xff, HSTS) // Clean up
- Return (1) // Success
- }
-
- Return (0)
- }
-
-
- // SMBus Read Byte
- // Arg0: Address
- // Arg1: Command
- // Return: 0xffff = Failure, Data (8bit) = Success
-
- Method (SRDB, 2, Serialized)
- {
-
- // Is the SMBus Controller Ready?
- If (SRDY()) {
- Return (0xffff)
- }
-
- // Receive Byte
- Store (0, I2CE) // SMBus Enable
- Store (0xbf, HSTS)
- Store (Or (Arg0, 1), TXSA) // Write Address
- Store (Arg1, HCMD) // Command
-
- Store (0x48, HCNT) // Start
-
- If (CMPL()) {
- Or (HSTS, 0xff, HSTS) // Clean up
- Return (DAT0) // Success
- }
-
- Return (0xffff)
- }
- */
-
- // Todo: Does anyone ever use these?
- // Missing: Read / Write Word
- // Missing: Read / Write Block
-}
diff --git a/src/soc/intel/sch/acpi/usb.asl b/src/soc/intel/sch/acpi/usb.asl
deleted file mode 100644
index fc5f07c5b2..0000000000
--- a/src/soc/intel/sch/acpi/usb.asl
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* Intel i82801G USB support */
-
-// USB Controller 0:1d.0
-
-Device (USB1)
-{
- Name(_ADR, 0x001d0000)
-
- OperationRegion(U01P, PCI_Config, 0, 256)
- Field(U01P, DWordAcc, NoLock, Preserve)
- {
- Offset(0xc4),
- U1WE, 2 // USB Wake Enable
- }
-
- Name (_PRW, Package(){ 3, 4 }) // Power Resources for Wake
-
- Method (_PSW, 1) // Power State Wake method
- {
- // USB Controller can wake OS from Sleep State
- If (Arg0) {
- Store (3, U1WE)
- } Else {
- Store (0, U1WE)
- }
- }
-
- // Leave USB ports on for to allow Wake from USB
-
- Method(_S3D,0) // Highest D State in S3 State
- {
- Return (2)
- }
-
- Method(_S4D,0) // Highest D State in S4 State
- {
- Return (2)
- }
-}
-
-
-// USB Controller 0:1d.1
-
-Device (USB2)
-{
- Name(_ADR, 0x001d0001)
-
- OperationRegion(U02P, PCI_Config, 0, 256)
- Field(U02P, DWordAcc, NoLock, Preserve)
- {
- Offset(0xc4),
- U2WE, 2 // USB Wake Enable
- }
-
- Name (_PRW, Package(){ 3, 4 }) // Power Resources for Wake
-
- Method (_PSW, 1) // Power State Wake method
- {
- // USB Controller can wake OS from Sleep State
- If (Arg0) {
- Store (3, U2WE)
- } Else {
- Store (0, U2WE)
- }
- }
-
- // Leave USB ports on for to allow Wake from USB
-
- Method(_S3D,0) // Highest D State in S3 State
- {
- Return (2)
- }
-
- Method(_S4D,0) // Highest D State in S4 State
- {
- Return (2)
- }
-
-}
-
-
-// USB Controller 0:1d.2
-
-Device (USB3)
-{
- Name(_ADR, 0x001d0002)
-
- OperationRegion(U03P, PCI_Config, 0, 256)
- Field(U03P, DWordAcc, NoLock, Preserve)
- {
- Offset(0xc4),
- U3WE, 2 // USB Wake Enable
- }
-
- Name (_PRW, Package(){ 3, 4 }) // Power Resources for Wake
-
- Method (_PSW, 1) // Power State Wake method
- {
- // USB Controller can wake OS from Sleep State
- If (Arg0) {
- Store (3, U3WE)
- } Else {
- Store (0, U3WE)
- }
- }
-
- // Leave USB ports on for to allow Wake from USB
-
- Method(_S3D,0) // Highest D State in S3 State
- {
- Return (2)
- }
-
- Method(_S4D,0) // Highest D State in S4 State
- {
- Return (2)
- }
-
-}
-
-
-// USB Controller 0:1d.3
-
-Device (USB4)
-{
- Name(_ADR, 0x001d0003)
-
- OperationRegion(U04P, PCI_Config, 0, 256)
- Field(U04P, DWordAcc, NoLock, Preserve)
- {
- Offset(0xc4),
- U4WE, 2 // USB Wake Enable
- }
-
- Name (_PRW, Package(){ 3, 4 }) // Power Resources for Wake
-
- Method (_PSW, 1) // Power State Wake method
- {
- // USB Controller can wake OS from Sleep State
- If (Arg0) {
- Store (3, U4WE)
- } Else {
- Store (0, U4WE)
- }
- }
-
- // Leave USB ports on for to allow Wake from USB
-
- Method(_S3D,0) // Highest D State in S3 State
- {
- Return (2)
- }
-
- Method(_S4D,0) // Highest D State in S4 State
- {
- Return (2)
- }
-
-}
-
-
-// EHCI Controller 0:1d.7
-
-Device (EHC1)
-{
- Name(_ADR, 0x001d0007)
-
- Name (_PRW, Package(){ 13, 4 }) // Power Resources for Wake
-
- // Leave USB ports on for to allow Wake from USB
-
- Method(_S3D,0) // Highest D State in S3 State
- {
- Return (2)
- }
-
- Method(_S4D,0) // Highest D State in S4 State
- {
- Return (2)
- }
-
- Device (HUB7)
- {
- Name (_ADR, 0x00000000)
-
- // How many are there?
- Device (PRT1) { Name (_ADR, 1) } // USB Port 0
- Device (PRT2) { Name (_ADR, 2) } // USB Port 1
- Device (PRT3) { Name (_ADR, 3) } // USB Port 2
- Device (PRT4) { Name (_ADR, 4) } // USB Port 3
- Device (PRT5) { Name (_ADR, 5) } // USB Port 4
- Device (PRT6) { Name (_ADR, 6) } // USB Port 5
- }
-}
diff --git a/src/soc/intel/sch/audio.c b/src/soc/intel/sch/audio.c
deleted file mode 100644
index 765d8de2a4..0000000000
--- a/src/soc/intel/sch/audio.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008 Advanced Micro Devices, Inc.
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/azalia_device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <arch/io.h>
-#include <delay.h>
-
-#define HDA_ICII_REG 0x68
-#define HDA_ICII_BUSY (1 << 0)
-#define HDA_ICII_VALID (1 << 1)
-
-typedef struct southbridge_intel_sch_config config_t;
-
-static int set_bits(void *port, u32 mask, u32 val)
-{
- u32 reg32;
- int count;
-
- /* Write (val & mask) to port */
- val &= mask;
- reg32 = read32(port);
- reg32 &= ~mask;
- reg32 |= val;
- write32(port, reg32);
-
- /* Wait for readback of register to
- * match what was just written to it
- */
- count = 50;
- do {
- /* Wait 1ms based on BKDG wait time */
- mdelay(1);
- reg32 = read32(port);
- reg32 &= mask;
- } while ((reg32 != val) && --count);
-
- /* Timeout occurred */
- if (!count)
- return -1;
- return 0;
-}
-
-static int codec_detect(u8 *base)
-{
- u32 reg32;
- int count;
-
- /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
- if (set_bits(base + 0x08, 1, 1) == -1)
- goto no_codec;
-
- /* clear STATESTS bits (BAR + 0xE)[2:0] */
- reg32 = read32(base + 0x0E);
- reg32 |= 7;
- write32(base + 0x0E, reg32);
-
- /* Wait for readback of register to
- * match what was just written to it
- */
- count = 50;
- do {
- /* Wait 1ms based on BKDG wait time */
- mdelay(1);
- reg32 = read32(base + 0x0E);
- } while ((reg32 != 0) && --count);
- /* Timeout occurred */
- if (!count)
- goto no_codec;
-
- /* Set Bit0 to 0 to enter reset state (BAR + 0x8)[0] */
- if (set_bits(base + 0x08, 1, 0) == -1)
- goto no_codec;
-
- /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
- if (set_bits(base + 0x08, 1, 1) == -1)
- goto no_codec;
-
- /* Read in Codec location (BAR + 0xe)[2..0] */
- reg32 = read32(base + 0xe);
- reg32 &= 0x0f;
- if (!reg32)
- goto no_codec;
-
- return reg32;
-
-no_codec:
- /* Codec Not found */
- /* Put HDA back in reset (BAR + 0x8) [0] */
- set_bits(base + 0x08, 1, 0);
- printk(BIOS_DEBUG, "sch_audio: No codec!\n");
- return 0;
-}
-
-static u32 find_verb(struct device *dev, u32 viddid, const u32 ** verb)
-{
- printk(BIOS_DEBUG, "sch_audio: dev=%s\n", dev_path(dev));
- printk(BIOS_DEBUG, "sch_audio: Reading viddid=%x\n", viddid);
-
- int idx = 0;
-
- while (idx < (cim_verb_data_size / sizeof(u32))) {
- u32 verb_size = 4 * cim_verb_data[idx + 2]; // in u32
- verb_size++; // we ship an additional gain value
- if (cim_verb_data[idx] != viddid) {
- idx += verb_size + 3; // skip verb + header
- continue;
- }
- *verb = &cim_verb_data[idx + 3];
- return verb_size;
- }
-
- /* Not all codecs need to load another verb */
- return 0;
-}
-
-/**
- * Wait 50usec for the codec to indicate it is ready
- * no response would imply that the codec is non-operative
- */
-
-static int wait_for_ready(u8 *base)
-{
- /* Use a 50 usec timeout - the Linux kernel uses the
- * same duration */
-
- int timeout = 50;
-
- while (timeout--) {
- u32 reg32 = read32(base + HDA_ICII_REG);
- if (!(reg32 & HDA_ICII_BUSY))
- return 0;
- udelay(1);
- }
-
- return -1;
-}
-
-/**
- * Wait 50usec for the codec to indicate that it accepted
- * the previous command. No response would imply that the code
- * is non-operative
- */
-
-static int wait_for_valid(u8 *base)
-{
- /* Use a 50 usec timeout - the Linux kernel uses the
- * same duration */
-
- int timeout = 25;
-
- write32(base + 0x68, 1);
- while (timeout--) {
- udelay(1);
- }
- timeout = 50;
- while (timeout--) {
- u32 reg32 = read32(base + 0x68);
- if ((reg32 & ((1 << 1) | (1 << 0))) == (1 << 1)) {
-
- write32(base + 0x68, 2);
- return 0;
- }
- udelay(1);
- }
-
- return -1;
-}
-
-static void codec_init(struct device *dev, u8 *base, int addr)
-{
- u32 reg32;
- const u32 *verb;
- u32 verb_size;
- int i;
-
- printk(BIOS_DEBUG, "sch_audio: Initializing codec #%d\n", addr);
-
- /* 1 */
- if (wait_for_ready(base) == -1)
- return;
-
- reg32 = (addr << 28) | 0x000f0000;
- write32(base + 0x60, reg32);
-
- if (wait_for_valid(base) == -1)
- return;
-
- reg32 = read32(base + 0x0);
- printk(BIOS_DEBUG, "sch_audio: GCAP: %08x\n", reg32);
-
- reg32 = read32(base + 0x4);
- printk(BIOS_DEBUG, "sch_audio: OUTPAY: %08x\n", reg32);
- reg32 = read32(base + 0x6);
- printk(BIOS_DEBUG, "sch_audio: INPAY: %08x\n", reg32);
-
- reg32 = read32(base + 0x64);
-
- /* 2 */
- printk(BIOS_DEBUG, "sch_audio: codec viddid: %08x\n", reg32);
- verb_size = find_verb(dev, reg32, &verb);
-
- if (!verb_size) {
- printk(BIOS_DEBUG, "sch_audio: No verb!\n");
- return;
- }
- printk(BIOS_DEBUG, "sch_audio: verb_size: %d\n", verb_size);
-
- /* 3 */
- for (i = 0; i < verb_size; i++) {
- if (wait_for_ready(base) == -1)
- return;
-
- write32(base + 0x60, verb[i]);
-
- if (wait_for_valid(base) == -1)
- return;
- }
- printk(BIOS_DEBUG, "sch_audio: verb loaded.\n");
-}
-
-static void codecs_init(struct device *dev, u8 *base, u32 codec_mask)
-{
- int i;
-
- for (i = 2; i >= 0; i--) {
- if (codec_mask & (1 << i))
- codec_init(dev, base, i);
- }
-}
-
-static void sch_audio_init(struct device *dev)
-{
- u8 *base;
- struct resource *res;
- u32 codec_mask;
- u32 reg32;
-
- res = find_resource(dev, 0x10);
- if (!res)
- return;
-
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MEMORY);
-
- // NOTE this will break as soon as the sch_audio get's a bar above
- // 4G. Is there anything we can do about it?
- base = res2mmio(res, 0, 0);
- printk(BIOS_DEBUG, "sch_audio: base = %px\n", base);
- codec_mask = codec_detect(base);
-
- if (codec_mask) {
- printk(BIOS_DEBUG, "sch_audio: codec_mask = %02x\n",
- codec_mask);
- codecs_init(dev, base, codec_mask);
- } else {
- /* No audio codecs found disable HD audio controller */
- pci_write_config32(dev, 0x10, 0);
- pci_write_config32(dev, PCI_COMMAND, 0);
- reg32 = pci_read_config32(dev, 0xFC);
- pci_write_config32(dev, 0xFC, reg32 | 1);
- }
-}
-
-static void sch_audio_set_subsystem(device_t dev, unsigned vendor,
- unsigned device)
-{
- if (!vendor || !device) {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- pci_read_config32(dev, PCI_VENDOR_ID));
- } else {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- ((device & 0xffff) << 16) | (vendor & 0xffff));
- }
-}
-
-static struct pci_operations sch_audio_pci_ops = {
- .set_subsystem = sch_audio_set_subsystem,
-};
-
-static struct device_operations sch_audio_ops = {
- .read_resources = pci_dev_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .init = sch_audio_init,
- .scan_bus = 0,
- .ops_pci = &sch_audio_pci_ops,
-};
-
-/* SCH audio function */
-static const struct pci_driver sch_audio __pci_driver = {
- .ops = &sch_audio_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x811B,
-};
diff --git a/src/soc/intel/sch/bootblock.c b/src/soc/intel/sch/bootblock.c
deleted file mode 100644
index deff35e4e5..0000000000
--- a/src/soc/intel/sch/bootblock.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <arch/io.h>
-
-/* Copy the bare minimum from port_access.c to enable MMCONF. */
-
-#define MSG_OPCODE_READ 0xD0000000
-#define MSG_OPCODE_WRITE 0xE0000000
-
-#define MCR 0xD0
-#define MDR 0xD4
-
-static void sch_port_access_write(int port, int reg, int bytes, long data)
-{
- pci_io_write_config32(PCI_DEV(0, 0, 0), MDR, data);
- pci_io_write_config32(PCI_DEV(0, 0, 0), MCR,
- (MSG_OPCODE_WRITE | (port << 16) | (reg << 8)));
- pci_io_read_config32(PCI_DEV(0, 0, 0), MDR);
-}
-
-static void bootblock_northbridge_init(void)
-{
- /* Enable PCI MMCONF decoding BAR. */
- sch_port_access_write(0, 0, 4, DEFAULT_PCIEXBAR | 1); /* pre-b1 */
- sch_port_access_write(2, 9, 4, DEFAULT_PCIEXBAR | 1); /* b1+ */
-}
diff --git a/src/soc/intel/sch/chip.h b/src/soc/intel/sch/chip.h
deleted file mode 100644
index 27d7c7334b..0000000000
--- a/src/soc/intel/sch/chip.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2008 coresystems GmbH
- * 2012 secunet Security Networks AG
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef SOC_INTEL_SCH_CHIP_H
-#define SOC_INTEL_SCH_CHIP_H
-
-#include <drivers/intel/gma/i915.h>
-
-struct soc_intel_sch_config {
- struct i915_gpu_controller_info gfx;
-
- /**
- * Interrupt Routing configuration
- * If bit7 is 1, the interrupt is disabled.
- */
- uint8_t pirqa_routing;
- uint8_t pirqb_routing;
- uint8_t pirqc_routing;
- uint8_t pirqd_routing;
- uint8_t pirqe_routing;
- uint8_t pirqf_routing;
- uint8_t pirqg_routing;
- uint8_t pirqh_routing;
-};
-
-#endif /* SOC_INTEL_SCH_CHIP_H */
diff --git a/src/soc/intel/sch/early_init.c b/src/soc/intel/sch/early_init.c
deleted file mode 100644
index cd777769f2..0000000000
--- a/src/soc/intel/sch/early_init.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009-2010 iWave Systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include "sch.h"
-
-#if 0
-static void sch_set_mtrr(void)
-{
- msr_t msr;
- printk(BIOS_DEBUG, "1");
- msr.hi = 0x06060606;
- msr.lo = 0x06060606;
- wrmsr(0x250, msr);
- printk(BIOS_DEBUG, "2");
- msr.hi = 0x06060606;
- msr.lo = 0x06060606;
- wrmsr(0x258, msr);
- printk(BIOS_DEBUG, "3");
- msr.hi = 0x0;
- msr.lo = 0x0;
- wrmsr(0x259, msr);
- printk(BIOS_DEBUG, "4");
- msr.hi = 0x04040404;
- msr.lo = 0x04040404;
- wrmsr(0x268, msr);
- printk(BIOS_DEBUG, "5");
- msr.hi = 0x04040404;
- msr.lo = 0x04040404;
- wrmsr(0x269, msr);
- printk(BIOS_DEBUG, "6");
- msr.hi = 0x04040404;
- msr.lo = 0x04040404;
- wrmsr(0x26A, msr);
- printk(BIOS_DEBUG, "7");
- msr.hi = 0x04040404;
- msr.lo = 0x04040404;
- wrmsr(0x26B, msr);
- printk(BIOS_DEBUG, "8");
- msr.hi = 0x04040404;
- msr.lo = 0x04040404;
- wrmsr(0x26C, msr);
- printk(BIOS_DEBUG, "9");
- msr.hi = 0x05050505;
- msr.lo = 0x05050505;
- wrmsr(0x26D, msr);
- printk(BIOS_DEBUG, "10");
- msr.hi = 0x05050505;
- msr.lo = 0x05050505;
- wrmsr(0x26E, msr);
- printk(BIOS_DEBUG, "11");
- msr.hi = 0x05050505;
- msr.lo = 0x05050505;
- wrmsr(0x26f, msr);
- printk(BIOS_DEBUG, "12");
- msr.hi = 0x0;
- msr.lo = 0x6;
- wrmsr(0x202, msr);
- printk(BIOS_DEBUG, "13");
- msr.hi = 0x0;
- msr.lo = 0xC0000800;
- wrmsr(0x203, msr);
- printk(BIOS_DEBUG, "14");
- msr.hi = 0x0;
- msr.lo = 0x3FAF0000;
- wrmsr(0x204, msr);
- printk(BIOS_DEBUG, "15");
- msr.hi = 0x0;
- msr.lo = 0xFFFF0800;
- wrmsr(0x205, msr);
- printk(BIOS_DEBUG, "16");
- msr.hi = 0x0;
- msr.lo = 0x3FB00000;
- wrmsr(0x206, msr);
- printk(BIOS_DEBUG, "16");
- msr.hi = 0x0;
- msr.lo = 0xFFF00800;
- wrmsr(0x207, msr);
- printk(BIOS_DEBUG, "17");
- msr.hi = 0x0;
- msr.lo = 0x3FC00000;
- wrmsr(0x208, msr);
- printk(BIOS_DEBUG, "18");
- msr.hi = 0x0;
- msr.lo = 0xFFC00800;
- wrmsr(0x209, msr);
- printk(BIOS_DEBUG, "19");
- msr.hi = 0x0;
- msr.lo = 0x0;
- wrmsr(0x20A, msr);
- printk(BIOS_DEBUG, "20");
- msr.hi = 0x0;
- msr.lo = 0x0;
- wrmsr(0x20B, msr);
- printk(BIOS_DEBUG, "21");
- msr.hi = 0x0;
- msr.lo = 0x0;
- wrmsr(0x20a, msr);
- printk(BIOS_DEBUG, "22");
- msr.hi = 0x0;
- msr.lo = 0x0;
- wrmsr(0x20B, msr);
- printk(BIOS_DEBUG, "23");
- msr.hi = 0x0;
- msr.lo = 0x0;
- wrmsr(0x20c, msr);
- msr.hi = 0x0;
- msr.lo = 0x0;
- wrmsr(0x20d, msr);
- msr.hi = 0x0;
- msr.lo = 0x0;
- wrmsr(0x20E, msr);
- msr.hi = 0x0;
- msr.lo = 0x0;
- wrmsr(0x20F, msr);
- msr.hi = 0x0;
- msr.lo = 0XC00;
- wrmsr(0x2FF, msr);
- printk(BIOS_DEBUG, "end");
-}
-#endif
-
-static void sch_detect_chipset(void)
-{
- u16 reg16;
- u8 reg8;
- printk(BIOS_INFO, "\n");
- reg16 = pci_read_config16(PCI_DEV(0, 0x00, 0), 0x2);
- switch (reg16) {
- case 0x8101:
- printk(BIOS_INFO, "UL11L/US15L");
- break;
- case 0x8100:
- printk(BIOS_INFO, "US15W");
- break;
- default:
- /* Others reserved. */
- printk(BIOS_INFO, "Unknown (%02x)", reg16);
- }
- printk(BIOS_INFO, " Chipset ");
-
- reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0x8);
- switch (reg8) {
- case 3:
- printk(BIOS_INFO, "Qual. Sample ES1, Stepping B1");
- break;
- case 4:
- printk(BIOS_INFO, "Qual. Sample ES2, Stepping C0");
- break;
- case 5:
- printk(BIOS_INFO, "Qual. Sample ES2-Prime, Stepping D0");
- break;
- case 6:
- printk(BIOS_INFO, "Qual. Sample QS, Stepping D1");
- break;
- default:
- /* Others reserved. */
- printk(BIOS_INFO, "Unknown (%02x)", reg8);
- }
- printk(BIOS_INFO, "\n");
-}
-
-static void sch_setup_non_standard_bars(void)
-{
- printk(BIOS_DEBUG, "Setting up ACPI PM1 block ");
- /* Address 0x1000 size 16B */
- pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x48,
- (0x80000000 | DEFAULT_PMBASE));
-
- printk(BIOS_DEBUG, "Setting up ACPI P block ");
- /* Address 0x1010 size 16B */
- sch_port_access_write(4, 0x70, 4, 0x80001010);
-
- /* SMBus address 0x1040 size 64B */
- pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x40, 0x80001040);
-
- /* GPIO address 0x1080 size 64B */
- pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x44, 0x80001080);
-
- /* GPE0 address 0x10C0 size 64B */
- pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x4C, 0x800010C0);
-
- sch_port_access_write(2, 4, 4, 0x3F703F76); /* FIXME: SMM Control */
-
- /* Base of Stolen Memory Address 0x1080 size 64B */
- pci_write_config32(PCI_DEV(0, 0x02, 0), 0x5C, 0x3F800000);
-
- /* RCBA */
- pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xF0,
- ((uintptr_t)DEFAULT_RCBABASE | 1));
-
- printk(BIOS_DEBUG, " done.\n");
-}
-
-static void sch_early_initialization(void)
-{
- /* Print some chipset specific information. */
- sch_detect_chipset();
-
- /* Setup all non standard BARs. */
- sch_setup_non_standard_bars();
-}
diff --git a/src/soc/intel/sch/early_smbus.c b/src/soc/intel/sch/early_smbus.c
deleted file mode 100644
index 2f9cdeb060..0000000000
--- a/src/soc/intel/sch/early_smbus.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <arch/io.h>
-#include <console/console.h>
-#include <device/pci_ids.h>
-#include <device/pci_def.h>
-#include "i82801gx.h"
-#include "smbus.h"
-
-void enable_smbus(void)
-{
- device_t dev;
-
- /* Set the SMBus device statically. */
- dev = PCI_DEV(0x0, 0x1f, 0x3);
-
- /* Check to make sure we've got the right device. */
- if (pci_read_config16(dev, 0x2) != 0x27da) {
- die("SMBus controller not found!");
- }
-
- /* Set SMBus I/O base. */
- pci_write_config32(dev, SMB_BASE,
- SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
-
- /* Set SMBus enable. */
- pci_write_config8(dev, HOSTC, HST_EN);
-
- /* Set SMBus I/O space enable. */
- pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
-
- /* Disable interrupt generation. */
- outb(0, SMBUS_IO_BASE + SMBHSTCTL);
-
- /* Clear any lingering errors, so transactions can run. */
- outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
- printk(BIOS_DEBUG, "SMBus controller enabled.\n");
-}
-
-int smbus_read_byte(unsigned device, unsigned address)
-{
- return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
-}
diff --git a/src/soc/intel/sch/gma.c b/src/soc/intel/sch/gma.c
deleted file mode 100644
index 4c92444060..0000000000
--- a/src/soc/intel/sch/gma.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <drivers/intel/gma/i915.h>
-#include "chip.h"
-
-static void gma_func0_init(struct device *dev)
-{
- u32 reg32;
-
- /* IGD needs to be bus master. */
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
-
- pci_dev_init(dev);
-}
-
-static void gma_set_subsystem(device_t dev, unsigned vendor, unsigned device)
-{
- if (!vendor || !device) {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- pci_read_config32(dev, PCI_VENDOR_ID));
- } else {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- ((device & 0xffff) << 16) | (vendor & 0xffff));
- }
-}
-
-const struct i915_gpu_controller_info *
-intel_gma_get_controller_info(void)
-{
- device_t dev = dev_find_slot(0, PCI_DEVFN(0x2,0));
- if (!dev) {
- return NULL;
- }
- struct soc_intel_sch_config *chip = dev->chip_info;
- return &chip->gfx;
-}
-
-static void gma_ssdt(device_t device)
-{
- const struct i915_gpu_controller_info *gfx = intel_gma_get_controller_info();
- if (!gfx) {
- return;
- }
-
- drivers_intel_gma_displays_ssdt_generate(gfx);
-}
-
-static struct pci_operations gma_pci_ops = {
- .set_subsystem = gma_set_subsystem,
-};
-
-static struct device_operations gma_func0_ops = {
- .read_resources = pci_dev_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .acpi_fill_ssdt_generator = gma_ssdt,
- .init = gma_func0_init,
- .scan_bus = 0,
- .enable = 0,
- .ops_pci = &gma_pci_ops,
-};
-
-static const struct pci_driver sch_gma_func0_driver __pci_driver = {
- .ops = &gma_func0_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8108,
-};
diff --git a/src/soc/intel/sch/ide.c b/src/soc/intel/sch/ide.c
deleted file mode 100644
index 56e51a5cac..0000000000
--- a/src/soc/intel/sch/ide.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009-2010 iWave Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-
-/* PCI Configuration Space (D31:F1): IDE */
-#define INTR_LN 0x3c
-#define IDE_TIM_PRI 0x80 /* IDE timings, primary */
-
-extern int sch_port_access_read(int port, int reg, int bytes);
-
-static void ide_init(struct device *dev)
-{
- u32 ideTimingConfig, reg32;
-
- printk(BIOS_DEBUG, "sch_ide: initializing... ");
-
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- pci_write_config32(dev, PCI_COMMAND,
- reg32 | PCI_COMMAND_IO | PCI_COMMAND_MASTER);
-
- /* Program the clock. */
- if (sch_port_access_read(5, 3, 4) & (1 << 3)) {
- /* 533MHz, Read PCI MC register */
- reg32 = pci_read_config32(dev, 0x60);
- pci_write_config32(dev, 0x60, reg32 | 1);
- } else {
- /* 400MHz */
- reg32 = pci_read_config32(dev, 0x60);
- reg32 &= ~1;
- pci_write_config32(dev, 0x60, reg32);
- }
-
- /* Enable primary IDE interface. 80=04 81=00 82=02 83=80 */
- ideTimingConfig = 0x80020000;
- printk(BIOS_DEBUG, "IDE0 ");
- pci_write_config32(dev, IDE_TIM_PRI, ideTimingConfig);
-
- /* Set Interrupt Line. */
- /* Interrupt Pin is set by D31IP.PIP */
- printk(BIOS_DEBUG, "\n");
-}
-
-static void ide_set_subsystem(device_t dev, unsigned vendor, unsigned device)
-{
- if (!vendor || !device) {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- pci_read_config32(dev, PCI_VENDOR_ID));
- } else {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- ((device & 0xffff) << 16) | (vendor & 0xffff));
- }
-}
-
-static struct pci_operations ide_pci_ops = {
- .set_subsystem = ide_set_subsystem,
-};
-
-static struct device_operations ide_ops = {
- .read_resources = pci_dev_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .init = ide_init,
- .scan_bus = 0,
- .ops_pci = &ide_pci_ops,
-};
-
-static const struct pci_driver sch_ide __pci_driver = {
- .ops = &ide_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x811A,
-};
diff --git a/src/soc/intel/sch/lpc.c b/src/soc/intel/sch/lpc.c
deleted file mode 100644
index f5e17d880a..0000000000
--- a/src/soc/intel/sch/lpc.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2009-2010 iWave Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/ioapic.h>
-#include <arch/acpigen.h>
-#include <arch/acpigen.h>
-#include <cpu/cpu.h>
-#include <cbmem.h>
-#include <string.h>
-#include <drivers/intel/gma/i915.h>
-#include "nvs.h"
-#include "chip.h"
-
-/* SCH LPC defines */
-#define SCH_ACPI_CTL 0x58
-#define SCH_SIRQ_CTL 0x68
-#define PIRQA_ROUT 0x60
-#define PIRQB_ROUT 0x61
-#define PIRQC_ROUT 0x62
-#define PIRQD_ROUT 0x63
-#define PIRQE_ROUT 0x64
-#define PIRQF_ROUT 0x65
-#define PIRQG_ROUT 0x66
-#define PIRQH_ROUT 0x67
-
-typedef struct soc_intel_sch_config config_t;
-
-/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
- * 0x00 - 0000 = Reserved
- * 0x01 - 0001 = Reserved
- * 0x02 - 0010 = Reserved
- * 0x03 - 0011 = IRQ3
- * 0x04 - 0100 = IRQ4
- * 0x05 - 0101 = IRQ5
- * 0x06 - 0110 = IRQ6
- * 0x07 - 0111 = IRQ7
- * 0x08 - 1000 = Reserved
- * 0x09 - 1001 = IRQ9
- * 0x0A - 1010 = IRQ10
- * 0x0B - 1011 = IRQ11
- * 0x0C - 1100 = IRQ12
- * 0x0D - 1101 = Reserved
- * 0x0E - 1110 = IRQ14
- * 0x0F - 1111 = IRQ15
- * PIRQ[n]_ROUT[7] - PIRQ Routing Control
- * 0x80 - The PIRQ is not routed.
- */
-
-#define PIRQA 0x03
-#define PIRQB 0x05
-#define PIRQC 0x06
-#define PIRQD 0x07
-#define PIRQE 0x09
-#define PIRQF 0x0A
-#define PIRQG 0x0B
-#define PIRQH 0x0C
-
-static void sch_pirq_init(device_t dev)
-{
- device_t irq_dev;
-
- /* Get the chip configuration */
- config_t *config = dev->chip_info;
-
- pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing);
- pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing);
- pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing);
- pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing);
-
- pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing);
- pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing);
- pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing);
- pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing);
-
- /* Eric Biederman once said we should let the OS do this.
- * I am not so sure anymore he was right.
- */
-
- for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {
- u8 int_pin = 0, int_line = 0;
-
- if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI)
- continue;
-
- int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN);
-
- switch (int_pin) {
- case 1: /* INTA# */
- int_line = config->pirqa_routing;
- break;
- case 2: /* INTB# */
- int_line = config->pirqb_routing;
- break;
- case 3: /* INTC# */
- int_line = config->pirqc_routing;
- break;
- case 4: /* INTD# */
- int_line = config->pirqd_routing;
- break;
- }
-
- if (!int_line)
- continue;
-
- pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line);
- }
-}
-
-static void sch_fixups(struct device *dev)
-{
- u32 rcba_base;
-
- /* This needs to happen after PCI enumeration. */
- /* RCBA32(0x1d40) |= 1; */
- rcba_base = pci_read_config32(dev, 0xF0);
-
- /* Remove the enable bit. */
- rcba_base = rcba_base >> 1;
- rcba_base = rcba_base << 1;
- *((volatile u32 *)(rcba_base +0x104)) &= 0xFF00FFFF;
-}
-
-static void lpc_init(struct device *dev)
-{
- printk(BIOS_DEBUG, "SCH: lpc_init\n");
-
- /* Setup the PIRQ. */
- sch_pirq_init(dev);
- pci_write_config8(dev, SCH_SIRQ_CTL,0x80);
- sch_fixups(dev);
-}
-
-static void sch_lpc_read_resources(device_t dev)
-{
- struct resource *res;
-
- /* Get the normal PCI resources of this device. */
- pci_dev_read_resources(dev);
-
- /* Add an extra subtractive resource for both memory and I/O. */
- res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
- res->base = 0;
- res->size = 0xe000;
- res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
- IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
-
- res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
- res->base = 0xff800000;
- res->size = 0x00800000; /* 8 MB for flash */
- res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
- IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
-
- res = new_resource(dev, 3);
- res->base = IO_APIC_ADDR;
- res->size = 0x00001000;
- res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
-}
-
-static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
-{
- if (!vendor || !device) {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- pci_read_config32(dev, PCI_VENDOR_ID));
- } else {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- ((device & 0xffff) << 16) | (vendor & 0xffff));
- }
-}
-
-static void southbridge_inject_dsdt(device_t dev)
-{
- global_nvs_t *gnvs = cbmem_add (CBMEM_ID_ACPI_GNVS, sizeof (*gnvs));
-
- if (gnvs) {
- const struct i915_gpu_controller_info *gfx = intel_gma_get_controller_info();
- memset(gnvs, 0, sizeof(*gnvs));
- acpi_create_gnvs(gnvs);
-
- gnvs->ndid = gfx->ndid;
- memcpy(gnvs->did, gfx->did, sizeof(gnvs->did));
-
- /* And tell SMI about it */
- smm_setup_structures(gnvs, NULL, NULL);
-
- /* Add it to SSDT. */
- acpigen_write_scope("\\");
- acpigen_write_name_dword("NVSA", (u32) gnvs);
- acpigen_pop_len();
- }
-}
-
-static struct pci_operations pci_ops = {
- .set_subsystem = set_subsystem,
-};
-
-static struct device_operations device_ops = {
- .read_resources = sch_lpc_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .acpi_inject_dsdt_generator = southbridge_inject_dsdt,
- .write_acpi_tables = acpi_write_hpet,
- .init = lpc_init,
- .scan_bus = scan_lpc_bus,
- .ops_pci = &pci_ops,
-};
-
-/* SCH LPC Interface */
-static const struct pci_driver sch_lpc __pci_driver = {
- .ops = &device_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8119,
-};
diff --git a/src/soc/intel/sch/mmc.c b/src/soc/intel/sch/mmc.c
deleted file mode 100644
index ccc2dc1687..0000000000
--- a/src/soc/intel/sch/mmc.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009-2010 iWave Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-
-static void sch_mmc_init(struct device *dev)
-{
- u32 reg32;
-
- printk(BIOS_DEBUG, "MMC: Setting up controller.. ");
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- reg32 |= PCI_COMMAND_MASTER;
- reg32 |= PCI_COMMAND_MEMORY;
- pci_write_config32(dev, PCI_COMMAND, reg32);
- printk(BIOS_DEBUG, "done.\n");
-}
-
-static void sch_mmc_set_subsystem(device_t dev, unsigned vendor,
- unsigned device)
-{
- if (!vendor || !device) {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- pci_read_config32(dev, PCI_VENDOR_ID));
- } else {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- ((device & 0xffff) << 16) | (vendor & 0xffff));
- }
-}
-
-static struct pci_operations lops_pci = {
- .set_subsystem = &sch_mmc_set_subsystem,
-};
-
-static struct device_operations sch_mmc_ops = {
- .read_resources = pci_dev_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .init = sch_mmc_init,
- .scan_bus = 0,
- .ops_pci = &lops_pci,
-};
-
-static const struct pci_driver sch_mmc1 __pci_driver = {
- .ops = &sch_mmc_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x811C,
-};
-
-static const struct pci_driver sch_mmc2 __pci_driver = {
- .ops = &sch_mmc_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x811D,
-};
-
-static const struct pci_driver sch_mmc3 __pci_driver = {
- .ops = &sch_mmc_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x811E,
-
-};
diff --git a/src/soc/intel/sch/northbridge.c b/src/soc/intel/sch/northbridge.c
deleted file mode 100644
index 6bbce68e21..0000000000
--- a/src/soc/intel/sch/northbridge.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <arch/io.h>
-#include <stdint.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <stdlib.h>
-#include <string.h>
-#include <cbmem.h>
-#include <cpu/cpu.h>
-#include <arch/acpi.h>
-#include "sch.h"
-
-static int get_pcie_bar(u32 *base)
-{
- device_t dev;
- u32 pciexbar_reg;
-
- dev = dev_find_slot(0, PCI_DEVFN(0, 0));
- if (!dev)
- return 0;
-
- /* FIXME: Determine at runtime. */
-#ifdef POULSBO_PRE_B1
- pciexbar_reg = sch_port_access_read(0, 0, 4);
-#else
- pciexbar_reg = sch_port_access_read(2, 9, 4);
-#endif
-
- if (!(pciexbar_reg & (1 << 0)))
- return 0;
-
- switch ((pciexbar_reg >> 1) & 3) {
- case 0: /* 256MB */
- *base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) |
- (1 << 28));
- return 256;
- case 1: /* 128M */
- *base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) |
- (1 << 28) | (1 << 27));
- return 128;
- case 2: /* 64M */
- *base = pciexbar_reg & ((1 << 31) | (1 << 30) | (1 << 29) |
- (1 << 28) | (1 << 27) | (1 << 26));
- return 64;
- }
-
- return 0;
-}
-
-static void add_fixed_resources(struct device *dev, int index)
-{
- struct resource *resource;
-
- printk(BIOS_DEBUG, "Adding CMC shadow area\n");
- resource = new_resource(dev, index++);
- resource->base = (resource_t) CMC_SHADOW;
- resource->size = (resource_t) (64 * 1024);
- resource->flags = IORESOURCE_MEM | IORESOURCE_RESERVE |
- IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
-}
-
-static void pci_domain_set_resources(device_t dev)
-{
- u32 pci_tolm;
- u8 reg8;
- u16 reg16;
- unsigned long long tomk, tolud, tomk_stolen;
- uint64_t uma_memory_base = 0, uma_memory_size = 0;
- uint64_t tseg_memory_base = 0, tseg_memory_size = 0;
-
- /* Can we find out how much memory we can use at most this way? */
- pci_tolm = find_pci_tolm(dev->link_list);
- printk(BIOS_DEBUG, "pci_tolm: 0x%x\n", pci_tolm);
- printk(BIOS_SPEW, "Base of stolen memory: 0x%08x\n",
- pci_read_config32(dev_find_slot(0, PCI_DEVFN(2, 0)), 0x5c));
-
- tolud = sch_port_access_read(2, 8, 4);
- printk(BIOS_SPEW, "Top of Low Used DRAM: 0x%08llx\n", tolud);
-
- tomk = tolud / 1024;
- tomk_stolen = tomk;
-
- /* Note: subtract IGD device and TSEG. */
- reg8 = pci_read_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), 0x9e);
- if (reg8 & 1) {
- int tseg_size = 0;
- printk(BIOS_DEBUG, "TSEG decoded, subtracting ");
- reg8 >>= 1;
- reg8 &= 3;
- switch (reg8) {
- case 0:
- tseg_size = 1024; /* TSEG = 1M */
- break;
- case 1:
- tseg_size = 2048; /* TSEG = 2M */
- break;
- case 2:
- tseg_size = 8192; /* TSEG = 8M */
- break;
- }
-
- printk(BIOS_DEBUG, "%dM\n", tseg_size >> 10);
- tomk_stolen -= tseg_size;
-
- /* For reserving TSEG memory in the memory map */
- tseg_memory_base = tomk_stolen * 1024ULL;
- tseg_memory_size = tseg_size * 1024ULL;
- }
-
- reg16 = pci_read_config16(dev_find_slot(0, PCI_DEVFN(2, 0)), GGC);
- if (!(reg16 & 2)) {
- int uma_size = 0;
- printk(BIOS_DEBUG, "IGD decoded, subtracting ");
- reg16 >>= 4;
- reg16 &= 7;
- switch (reg16) {
- case 1:
- uma_size = 1024;
- break;
- case 2:
- uma_size = 4096;
- break;
- case 3:
- uma_size = 8192;
- break;
- }
- printk(BIOS_DEBUG, "%dM UMA\n", uma_size >> 10);
- tomk_stolen -= uma_size;
-
- /* For reserving UMA memory in the memory map. */
- uma_memory_base = tomk_stolen * 1024ULL;
- uma_memory_size = uma_size * 1024ULL;
- }
-
- /*
- * The following needs to be 2 lines, otherwise the second
- * number is always 0.
- */
- printk(BIOS_INFO, "Available memory: %dK", (u32) tomk);
- printk(BIOS_INFO, " (%dM)\n", (u32) (tomk >> 10));
-
- /* Report the memory regions. */
- ram_resource(dev, 3, 0, 640);
- ram_resource(dev, 4, 768, (tomk - 768));
- uma_resource(dev, 5, uma_memory_base >> 10, uma_memory_size >> 10);
- mmio_resource(dev, 6, tseg_memory_base >> 10, tseg_memory_size >> 10);
-
- add_fixed_resources(dev, 7);
-
- assign_resources(dev->link_list);
-
- set_late_cbmem_top(tomk * 1024 - uma_memory_size - tseg_memory_base);
-}
-
-/*
- * TODO: We could determine how many PCIe busses we need in the bar. For now
- * that number is hardcoded to a max of 64.
- * See e7525/northbridge.c for an example.
- */
-static struct device_operations pci_domain_ops = {
- .read_resources = pci_domain_read_resources,
- .set_resources = pci_domain_set_resources,
- .enable_resources = NULL,
- .init = NULL,
- .scan_bus = pci_domain_scan_bus,
- .ops_pci_bus = pci_bus_default_ops,
-};
-
-static void mc_read_resources(device_t dev)
-{
- u32 pcie_config_base;
- int buses;
-
- pci_dev_read_resources(dev);
-
- /*
- * We use 0xcf as an unused index for our PCIe bar so that we find
- * it again.
- */
- buses = get_pcie_bar(&pcie_config_base);
- if (buses) {
- struct resource *resource = new_resource(dev, 0xcf);
- mmconf_resource_init(resource, pcie_config_base, buses);
- }
-}
-
-static void intel_set_subsystem(device_t dev, unsigned vendor, unsigned device)
-{
- if (!vendor || !device) {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- pci_read_config32(dev, PCI_VENDOR_ID));
- } else {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- ((device & 0xffff) << 16) | (vendor & 0xffff));
- }
-}
-
-static struct pci_operations intel_pci_ops = {
- .set_subsystem = intel_set_subsystem,
-};
-
-static struct device_operations mc_ops = {
- .read_resources = mc_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .acpi_fill_ssdt_generator = generate_cpu_entries,
- .scan_bus = 0,
- .ops_pci = &intel_pci_ops,
-};
-
-static const struct pci_driver mc_driver __pci_driver = {
- .ops = &mc_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8100,
-};
-
-static void cpu_bus_init(device_t dev)
-{
- initialize_cpus(dev->link_list);
-}
-
-static struct device_operations cpu_bus_ops = {
- .read_resources = DEVICE_NOOP,
- .set_resources = DEVICE_NOOP,
- .enable_resources = DEVICE_NOOP,
- .init = cpu_bus_init,
- .scan_bus = 0,
-};
-
-static void enable_dev(device_t dev)
-{
- /* Set the operations if it is a special bus type. */
- if (dev->path.type == DEVICE_PATH_DOMAIN) {
- dev->ops = &pci_domain_ops;
- } else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) {
- dev->ops = &cpu_bus_ops;
- }
-}
-
-struct chip_operations northbridge_intel_sch_ops = {
- CHIP_NAME("Intel SCH Northbridge")
- .enable_dev = enable_dev,
-};
diff --git a/src/soc/intel/sch/nvs.h b/src/soc/intel/sch/nvs.h
deleted file mode 100644
index f62715ef92..0000000000
--- a/src/soc/intel/sch/nvs.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef SOC_INTEL_SCH_NVS_H
-#define SOC_INTEL_SCH_NVS_H
-
-#include <compiler.h>
-typedef struct {
- /* Miscellaneous */
- u16 osys; /* 0x00 - Operating System */
- u8 smif; /* 0x02 - SMI function call ("TRAP") */
- u8 prm0; /* 0x03 - SMI function call parameter */
- u8 prm1; /* 0x04 - SMI function call parameter */
- u8 scif; /* 0x05 - SCI function call (via _L00) */
- u8 prm2; /* 0x06 - SCI function call parameter */
- u8 prm3; /* 0x07 - SCI function call parameter */
- u8 lckf; /* 0x08 - Global Lock function for EC */
- u8 prm4; /* 0x09 - Lock function parameter */
- u8 prm5; /* 0x0a - Lock function parameter */
- u32 p80d; /* 0x0b - Debug port (IO 0x80) value */
- u8 lids; /* 0x0f - LID state (open = 1) */
- u8 pwrs; /* 0x10 - Power state (AC = 1) */
- u8 dbgs; /* 0x11 - Debug state */
- u8 linx; /* 0x12 - Linux OS */
- u8 dckn; /* 0x13 - PCIe docking state */
- /* Thermal policy */
- u8 actt; /* 0x14 - active trip point */
- u8 psvt; /* 0x15 - passive trip point */
- u8 tc1v; /* 0x16 - passive trip point TC1 */
- u8 tc2v; /* 0x17 - passive trip point TC2 */
- u8 tspv; /* 0x18 - passive trip point TSP */
- u8 crtt; /* 0x19 - critical trip point */
- u8 dtse; /* 0x1a - Digital Thermal Sensor enable */
- u8 dts1; /* 0x1b - DT sensor 1 */
- u8 dts2; /* 0x1c - DT sensor 2 */
- u8 rsvd2;
- /* Battery Support */
- u8 bnum; /* 0x1e - number of batteries */
- u8 b0sc, b1sc, b2sc; /* 0x1f-0x21 - stored capacity */
- u8 b0ss, b1ss, b2ss; /* 0x22-0x24 - stored status */
- u8 rsvd3[3];
- /* Processor Identification */
- u8 apic; /* 0x28 - APIC enabled */
- u8 mpen; /* 0x29 - MP capable/enabled */
- u8 pcp0; /* 0x2a - PDC CPU/CORE 0 */
- u8 pcp1; /* 0x2b - PDC CPU/CORE 1 */
- u8 ppcm; /* 0x2c - Max. PPC state */
- u8 rsvd4[5];
- /* Super I/O & CMOS config */
- u8 natp; /* 0x32 - SIO type */
- u8 cmap; /* 0x33 - */
- u8 cmbp; /* 0x34 - */
- u8 lptp; /* 0x35 - LPT port */
- u8 fdcp; /* 0x36 - Floppy Disk Controller */
- u8 rfdv; /* 0x37 - */
- u8 hotk; /* 0x38 - Hot Key */
- u8 rtcf;
- u8 util;
- u8 acin;
- /* Integrated Graphics Device */
- u8 igds; /* 0x3c - IGD state */
- u8 tlst; /* 0x3d - Display Toggle List Pointer */
- u8 cadl; /* 0x3e - currently attached devices */
- u8 padl; /* 0x3f - previously attached devices */
- u16 cste; /* 0x40 - current display state */
- u16 nste; /* 0x42 - next display state */
- u16 sste; /* 0x44 - set display state */
- u8 ndid; /* 0x46 - number of device ids */
- u32 did[5]; /* 0x47 - 5b device id 1..5 */
- u8 rsvd5[0x9];
- /* Backlight Control */
- u8 blcs; /* 0x64 - Backlight Control possible */
- u8 brtl;
- u8 odds;
- u8 rsvd6[0x7];
- /* Ambient Light Sensors*/
- u8 alse; /* 0x6e - ALS enable */
- u8 alaf;
- u8 llow;
- u8 lhih;
- u8 rsvd7[0x6];
- /* EMA */
- u8 emae; /* 0x78 - EMA enable */
- u16 emap;
- u16 emal;
- u8 rsvd8[0x5];
- /* MEF */
- u8 mefe; /* 0x82 - MEF enable */
- u8 rsvd9[0x9];
- /* TPM support */
- u8 tpmp; /* 0x8c - TPM */
- u8 tpme;
- u8 rsvd10[8];
- /* SATA */
- u8 gtf0[7]; /* 0x96 - GTF task file buffer for port 0 */
- u8 gtf1[7];
- u8 gtf2[7];
- u8 idem;
- u8 idet;
- u8 rsvd11[7];
- /* IGD OpRegion (not implemented yet) */
- u32 aslb; /* 0xb4 - IGD OpRegion Base Address */
- u8 ibtt;
- u8 ipat;
- u8 itvf;
- u8 itvm;
- u8 ipsc;
- u8 iblc;
- u8 ibia;
- u8 issc;
- u8 i409;
- u8 i509;
- u8 i609;
- u8 i709;
- u8 idmm;
- u8 idms;
- u8 if1e;
- u8 hvco;
- u32 nxd[8];
- u8 rsvd12[8];
- /* Mainboard specific */
- u8 dock; /* 0xf0 - Docking Status */
- u8 bten;
- u8 rsvd13[14];
-} __packed global_nvs_t;
-
-void acpi_create_gnvs(global_nvs_t * gnvs);
-
-#endif /* SOC_INTEL_SCH_NVS_H */
diff --git a/src/soc/intel/sch/pcie.c b/src/soc/intel/sch/pcie.c
deleted file mode 100644
index 6ad5345f8a..0000000000
--- a/src/soc/intel/sch/pcie.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2009-2010 iWave Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-
-static void pci_init(struct device *dev)
-{
- u16 reg16;
- u32 reg32;
-
- printk(BIOS_DEBUG, "Initializing SCH PCIe bridge.\n");
-
- /* Enable Bus Master */
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- reg32 |= PCI_COMMAND_MASTER;
- pci_write_config32(dev, PCI_COMMAND, reg32);
-
- /* Set Cache Line Size to 0x10 */
- // This has no effect but the OS might expect it
- pci_write_config8(dev, 0x0c, 0x10);
- //pci_write_config32(dev, 0x18, 0x11);
-
- //reg16 = pci_read_config16(dev, 0x3e);
- //reg16 &= ~(1 << 0); /* disable parity error response */
- // reg16 &= ~(1 << 1); /* disable SERR */
- //reg16 |= (1 << 2); /* ISA enable */
- //pci_write_config16(dev, 0x3e, reg16);
- /* Slot implemented. */
- reg16 = pci_read_config16(dev, 0x42);
- reg16 |= (1 << 8);
- pci_write_config16(dev, 0x42, reg16);
-
- reg16 = pci_read_config16(dev, 0x48);
- reg16 |= 0xf;
- pci_write_config16(dev, 0x48, reg16);
-}
-
-static void pcie_set_subsystem(device_t dev, unsigned vendor, unsigned device)
-{
- /* NOTE: This is not the default position! */
- if (!vendor || !device) {
- pci_write_config32(dev, 0x94, pci_read_config32(dev, 0));
- } else {
- pci_write_config32(dev, 0x94,
- ((device & 0xffff) << 16) | (vendor & 0xffff));
- }
-}
-
-static struct pci_operations pci_ops = {
- .set_subsystem = pcie_set_subsystem,
-};
-
-static struct device_operations device_ops = {
- .read_resources = pci_bus_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_bus_enable_resources,
- .init = pci_init,
- .scan_bus = pci_scan_bridge,
- .ops_pci = &pci_ops,
-};
-
-/* Port 1 */
-static const struct pci_driver sch_pcie_port1 __pci_driver = {
- .ops = &device_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8110,
-};
-
-/*Port 2 */
-static const struct pci_driver sch_pcie_port2 __pci_driver = {
- .ops = &device_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8112,
-};
diff --git a/src/soc/intel/sch/port_access.c b/src/soc/intel/sch/port_access.c
deleted file mode 100644
index 320c537069..0000000000
--- a/src/soc/intel/sch/port_access.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009-2010 iWave Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-// Use simple device model for this file even in ramstage
-#define __SIMPLE_DEVICE__
-
-#include <stdint.h>
-#include <arch/io.h>
-#include <device/pci_def.h>
-#include <device/pnp_def.h>
-#include <cpu/x86/lapic.h>
-#include "sch.h"
-
-/*
- * Restricted Access Regions:
- *
- * MCR - Message Control Register
- * 31 24 16 8 4 0
- * ----------------------------------------------------------------------------
- * | | | Target | Write | |
- * | Opcode | Port | register | byte | Reserved |
- * | | | Address | Enables | |
- * ----------------------------------------------------------------------------
- *
- * MDR - Message Data Register
- * 31 0
- * ----------------------------------------------------------------------------
- * | |
- * | Data |
- * | |
- * ----------------------------------------------------------------------------
- */
-
-#define MSG_OPCODE_READ 0xD0000000
-#define MSG_OPCODE_WRITE 0xE0000000
-
-#define MCR 0xD0
-#define MDR 0xD4
-
-int sch_port_access_read(int port, int reg, int bytes)
-{
- pci_write_config32(PCI_DEV(0, 0, 0), MCR,
- (MSG_OPCODE_READ | (port << 16) | (reg << 8)));
- return pci_read_config32(PCI_DEV(0, 0, 0), MDR);
-}
-
-void sch_port_access_write(int port, int reg, int bytes, long data)
-{
- pci_write_config32(PCI_DEV(0, 0, 0), MDR, data);
- pci_write_config32(PCI_DEV(0, 0, 0), MCR,
- (MSG_OPCODE_WRITE | (port << 16) | (reg << 8)));
- pci_read_config32(PCI_DEV(0, 0, 0), MDR);
-}
-
-void sch_port_access_write_ram_cmd(int cmd, int port, int reg, int data)
-{
- pci_write_config32(PCI_DEV(0, 0, 0), MDR, data);
- pci_write_config32(PCI_DEV(0, 0, 0), MCR,
- ((cmd << 24) | (port << 16) | (reg << 8)));
- pci_read_config32(PCI_DEV(0, 0, 0), MDR);
-}
diff --git a/src/soc/intel/sch/raminit.c b/src/soc/intel/sch/raminit.c
deleted file mode 100644
index 1131510967..0000000000
--- a/src/soc/intel/sch/raminit.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009-2010 iWave Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <string.h>
-#include <cpu/x86/mtrr.h>
-#include <cpu/x86/cache.h>
-#include <spd.h>
-#include "raminit.h"
-#include "sch.h"
-
-#define DEBUG_RAM_SETUP
-#define SOFTSTRSP(base, off) *((volatile u8 *)((base) + (off)))
-
-/* Debugging macros. */
-#if defined(DEBUG_RAM_SETUP)
-#define PRINTK_DEBUG(x...) printk(BIOS_DEBUG, x)
-#else
-#define PRINTK_DEBUG(x...)
-#endif
-
-#define BOOT_MODE_RESUME 1
-#define BOOT_MODE_NORMAL 0
-
-#include "port_access.c"
-
-static void detect_fsb(struct sys_info *sysinfo)
-{
- u32 reg32;
-
- reg32 = sch_port_access_read(5, 3, 4);
- if (reg32 & BIT(3))
- sysinfo->fsb_frequency = 533;
- else
- sysinfo->fsb_frequency = 400;
-}
-
-static u32 detect_softstrap_base(void)
-{
- u32 reg32, base_addr;
-
- reg32 = sch_port_access_read(4, 0x71, 2);
- reg32 &= 0x700;
- reg32 = reg32 >> 7;
- switch (reg32) {
- case 7:
- base_addr = 0xFFFB0000;
- break;
- case 6:
- base_addr = 0xFFFC0000;
- break;
- case 5:
- base_addr = 0xFFFD0000;
- break;
- case 4:
- base_addr = 0xFFFE0000;
- break;
- default:
- base_addr = 0;
- die("No valid softstrap base found.\n");
- }
- return base_addr;
-}
-
-static void detect_softstraps(struct sys_info *sysinfo)
-{
- u8 reg8, temp;
- u32 sbase = detect_softstrap_base();
-
- reg8 = SOFTSTRSP(sbase, 0x87f2);
- sysinfo->ranks = reg8;
- if (reg8 == 0) {
- sysinfo->ram_param_source = RAM_PARAM_SOURCE_SPD;
- /* FIXME: Implement SPD reading. */
- die("No support for reading DIMM config from SPD yet!");
- return;
- } else {
- sysinfo->ram_param_source = RAM_PARAM_SOURCE_SOFTSTRAP;
- /* Timings from soft strap */
- reg8 = SOFTSTRSP(sbase, 0x87f0);
- temp = reg8 & 0x30;
- temp = temp >> 4;
- sysinfo->cl = temp;
- temp = reg8 & 0x0c;
- temp = temp >> 2;
- sysinfo->trcd = temp;
- temp = reg8 & 0x03;
- sysinfo->trp = temp;
-
- /* Geometry from Softstrap */
- reg8 = SOFTSTRSP(sbase, 0x87f1);
-
- temp = reg8 & 0x06;
- temp = temp >> 1;
- sysinfo->device_density = temp;
-
- temp = reg8 & 0x01;
- sysinfo->data_width = temp;
-
- /* Refresh rate default 7.8us */
- sysinfo->refresh = 3;
- }
-}
-
-static void program_sch_dram_data(struct sys_info *sysinfo)
-{
- u32 reg32;
-
- /*
- * Program DRP DRAM Rank Population and Interface Register as per data
- * in sysinfo SCH port 1 register 0..0xFF.
- */
- reg32 =
- sch_port_access_read(SCH_MSG_DUNIT_PORT, SCH_MSG_DUNIT_REG_DRP, 4);
- reg32 &= ~(DRP_FIELDS); /* Clear all DRP fields we'll change. */
- /* Rank0 Device Width, Density, Enable */
- reg32 |= sysinfo->data_width | (sysinfo->device_density << 1) | (1 << 3);
- /* Rank1 Device Width, Density, Enable */
- reg32 |= (sysinfo->data_width << 4)
- | ((sysinfo->device_density) << 5) | (1 << 7);
- sch_port_access_write(SCH_MSG_DUNIT_PORT,
- SCH_MSG_DUNIT_REG_DRP, 4, reg32);
-
- /*
- * Program DTR DRAM Timing Register as per data in sysinfo SCH port 1
- * register 1.
- *
- * tRD_dly = 2 (15:13 = 010b)
- * 0X3F
- */
- reg32 =
- sch_port_access_read(SCH_MSG_DUNIT_PORT, SCH_MSG_DUNIT_REG_DTR, 4);
- reg32 &= ~(DTR_FIELDS); /* Clear all DTR fields we'll change. */
-
- reg32 = (sysinfo->trp);
- reg32 |= (sysinfo->trcd) << 2;
- reg32 |= (sysinfo->cl) << 4;
- reg32 |= 0X4000; /* tRD_dly = 2 (15:13 = 010b) */
- sch_port_access_write(SCH_MSG_DUNIT_PORT, SCH_MSG_DUNIT_REG_DTR, 4,
- reg32);
-
- /*
- * DCO DRAM Controller Operation Register as per data in sysinfo
- * SCH port 1 register 2 0xF.
- */
- reg32 =
- sch_port_access_read(SCH_MSG_DUNIT_PORT, SCH_MSG_DUNIT_REG_DCO, 4);
- reg32 &= ~(DCO_FIELDS); /* Clear all DTR fields we'll change. */
-
- if (sysinfo->fsb_frequency == 533)
- reg32 |= 1;
- else
- reg32 &= ~(BIT(0));
- reg32 = 0x006911c; // FIXME ?
-
- sch_port_access_write(SCH_MSG_DUNIT_PORT, SCH_MSG_DUNIT_REG_DCO, 4,
- reg32);
-}
-
-static void program_dll_config(struct sys_info *sysinfo)
-{
- if (sysinfo->fsb_frequency == 533) {
- sch_port_access_write(SCH_MSG_DUNIT_PORT, 0x21, 4, 0x46464646);
- sch_port_access_write(SCH_MSG_DUNIT_PORT, 0x22, 4, 0x46464646);
- } else {
- sch_port_access_write(SCH_MSG_DUNIT_PORT, 0x21, 4, 0x58585858);
- sch_port_access_write(SCH_MSG_DUNIT_PORT, 0x22, 4, 0x58585858);
- }
- sch_port_access_write(SCH_MSG_DUNIT_PORT, 0x23, 4, 0x2222);
- if (sysinfo->fsb_frequency == 533)
- sch_port_access_write(SCH_MSG_DUNIT_PORT, 0x20, 4, 0x993B);
- else
- sch_port_access_write(SCH_MSG_DUNIT_PORT, 0x20, 4, 0xCC3B);
-}
-
-static void do_jedec_init(struct sys_info *sysinfo)
-{
- u32 reg32, rank, cmd, temp, num_ranks;
-
- /* Performs JEDEC memory initializattion for all memory rows */
- /* Set CKE0/1 low */
- reg32 =
- sch_port_access_read(SCH_MSG_DUNIT_PORT, SCH_MSG_DUNIT_REG_DRP, 4);
- reg32 |= DRP_CKE_DIS;
- sch_port_access_write(SCH_MSG_DUNIT_PORT,
- SCH_MSG_DUNIT_REG_DRP, 4, reg32);
- reg32 =
- sch_port_access_read(SCH_MSG_DUNIT_PORT, SCH_MSG_DUNIT_REG_DRP, 4);
- rank = 0;
- num_ranks = sysinfo->ranks;
-
- do {
- /* Start clocks */
- reg32 = sch_port_access_read(SCH_MSG_DUNIT_PORT,
- SCH_MSG_DUNIT_REG_DRP, 4);
- reg32 &= ~(DRP_SCK_DIS); /* Enable all SCK/SCKB by def. */
- sch_port_access_write(1, SCH_MSG_DUNIT_REG_DRP, 4, reg32);
- /* Program misc. SCH registers on rank 0 initialization. */
- reg32 = sch_port_access_read(SCH_MSG_DUNIT_PORT,
- SCH_MSG_DUNIT_REG_DRP, 4);
- if (rank == 0)
- program_dll_config(sysinfo);
-
- printk(BIOS_DEBUG, "Setting up RAM\n");
-
- /*
- * Wait 200us
- * reg32 = inb(ACPI_BASE + 8); PM1 Timer
- * reg32 &=0xFFFFFF;
- * reg32 +=0x2EE;
- * do {
- * reg32 = inb(ACPI_BASE + 8);PM1 Timer
- * reg32 &= 0xFFFFFF;
- * } while (reg32 < 0x2EE);
- */
-
- /* Apply NOP. */
- cmd = rank;
- cmd |= SCH_DRAMINIT_CMD_NOP;
- sch_port_access_write_ram_cmd(SCH_OPCODE_DRAMINIT,
- SCH_MSG_DUNIT_PORT, 0, cmd);
- /* Set CKE=high. */
- reg32 = sch_port_access_read(SCH_MSG_DUNIT_PORT,
- SCH_MSG_DUNIT_REG_DRP, 4);
- reg32 &= 0xFFFF9FFF; /* Clear both the CKE static disables. */
- sch_port_access_write(SCH_MSG_DUNIT_PORT,
- SCH_MSG_DUNIT_REG_DRP, 4, reg32);
- /*
- * Wait 400ns (not needed when executing from flash).
- * Precharge all.
- */
- reg32 = sch_port_access_read(SCH_MSG_DUNIT_PORT,
- SCH_MSG_DUNIT_REG_DRP, 4);
- cmd = rank;
- cmd |= SCH_DRAMINIT_CMD_PALL;
- sch_port_access_write_ram_cmd(SCH_OPCODE_DRAMINIT,
- SCH_MSG_DUNIT_PORT, 0, cmd);
-
- /*
- * EMRS(2); High temp self refresh=disabled,
- * partial array self refresh=full.
- */
- cmd = rank;
- cmd |= SCH_DRAMINIT_CMD_EMRS2;
- sch_port_access_write_ram_cmd(SCH_OPCODE_DRAMINIT,
- SCH_MSG_DUNIT_PORT, 0, cmd);
-
- /* EMRS(3) (no command). */
- cmd = rank;
- cmd |= SCH_DRAMINIT_CMD_EMRS3;
- sch_port_access_write_ram_cmd(SCH_OPCODE_DRAMINIT,
- SCH_MSG_DUNIT_PORT, 0, cmd);
-
- /* EMRS(1); Enable DLL (Leave all bits in the command at 0). */
- cmd = rank;
- cmd |= SCH_DRAMINIT_CMD_EMRS1;
- sch_port_access_write_ram_cmd(SCH_OPCODE_DRAMINIT,
- SCH_MSG_DUNIT_PORT, 0, cmd);
-
- /* MRS; Reset DLL (Set memory address bit 8). */
- cmd = rank;
- cmd |= SCH_DRAMINIT_CMD_MRS;
- cmd |= (SCH_JEDEC_DLLRESET << SCH_DRAMINIT_ADDR_OFFSET);
- sch_port_access_write_ram_cmd(SCH_OPCODE_DRAMINIT,
- SCH_MSG_DUNIT_PORT, 0, cmd);
-
- /* Precharge all. */
- cmd = rank;
- cmd |= SCH_DRAMINIT_CMD_PALL;
- sch_port_access_write_ram_cmd(SCH_OPCODE_DRAMINIT,
- SCH_MSG_DUNIT_PORT, 0, cmd);
-
- /* Issue 2 auto-refresh commands. */
- cmd = rank;
- cmd |= SCH_DRAMINIT_CMD_AREF;
- sch_port_access_write_ram_cmd(SCH_OPCODE_DRAMINIT,
- SCH_MSG_DUNIT_PORT, 0, cmd);
- sch_port_access_write_ram_cmd(SCH_OPCODE_DRAMINIT,
- SCH_MSG_DUNIT_PORT, 0, cmd);
-
- /* MRS command including tCL, tWR, burst length (always 4). */
- cmd = rank;
- cmd |= (SCH_DRAMINIT_CMD_MRS + JEDEC_STATIC_PARAM); /* Static param */
- temp = sysinfo->cl;
- temp += TCL_LOW; /* Adjust for the TCL base. */
- temp = temp << ((SCH_JEDEC_CL_OFFSET
- + SCH_DRAMINIT_ADDR_OFFSET)); /* Ready the CAS latency */
- cmd |= temp;
- sch_port_access_write_ram_cmd(SCH_OPCODE_DRAMINIT,
- SCH_MSG_DUNIT_PORT, 0, cmd);
-
- /*
- * Wait 200 clocks (max of 1us, so no need to delay).
- * Issue EMRS(1):OCD default.
- */
- cmd = rank;
- cmd |= SCH_DRAMINIT_CMD_EMRS1;
- cmd |= (SCH_JEDEC_OCD_DEFAULT << SCH_DRAMINIT_ADDR_OFFSET);
- sch_port_access_write_ram_cmd(SCH_OPCODE_DRAMINIT,
- SCH_MSG_DUNIT_PORT, 0, cmd);
-
- /* Issue EMRS(1): OCD cal. mode exit. */
- cmd = rank;
- cmd |= SCH_DRAMINIT_CMD_EMRS1;
- cmd |= (SCH_JEDEC_DQS_DIS << SCH_DRAMINIT_ADDR_OFFSET);
- sch_port_access_write_ram_cmd(SCH_OPCODE_DRAMINIT,
- SCH_MSG_DUNIT_PORT, 0, cmd);
- rank += SCH_DRAMINIT_RANK_MASK;
- num_ranks--;
- } while (num_ranks);
-}
-
-/**
- * @param boot_mode 0 = normal, 1 = resume
- */
-void sdram_initialize(int boot_mode)
-{
- struct sys_info sysinfo;
- u32 reg32;
-
- printk(BIOS_DEBUG, "Setting up RAM controller.\n");
-
- memset(&sysinfo, 0, sizeof(sysinfo));
-
- detect_fsb(&sysinfo);
- detect_softstraps(&sysinfo);
-
- program_sch_dram_data(&sysinfo);
-
- /* cold boot */
- if (boot_mode == BOOT_MODE_NORMAL)
- do_jedec_init(&sysinfo);
- else
- program_dll_config(&sysinfo);
-
- /* RAM init complete. */
- reg32 =
- sch_port_access_read(SCH_MSG_DUNIT_PORT, SCH_MSG_DUNIT_REG_DCO, 4);
- reg32 |= DCO_IC;
- reg32 |= ((sysinfo.refresh) << 2);
- reg32 = 0x006919c;
- sch_port_access_write(SCH_MSG_DUNIT_PORT,
- SCH_MSG_DUNIT_REG_DCO, 4, reg32);
-
- /* Setting up TOM. */
- reg32 = 0x10000000;
- reg32 = reg32 >> sysinfo.data_width;
- reg32 = reg32 << sysinfo.device_density;
- reg32 = reg32 << sysinfo.ranks;
- reg32 = 0x40000000;
- sch_port_access_write(2, 8, 4, reg32);
-
- /* Resume mode. */
- if (boot_mode == BOOT_MODE_RESUME)
- sch_port_access_write_ram_cmd(SCH_OPCODE_WAKEFULLON,
- SCH_MSG_DUNIT_PORT, 0, 0);
-
- sch_port_access_write(2, 0, 4, 0x98);
- sch_port_access_write(2, 3, 4, 0x7);
- sch_port_access_write(3, 2, 4, 0x408);
- sch_port_access_write(4, 0x71, 4, 0x600);
-}
diff --git a/src/soc/intel/sch/raminit.h b/src/soc/intel/sch/raminit.h
deleted file mode 100644
index 0d4f436726..0000000000
--- a/src/soc/intel/sch/raminit.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009-2010 iWave Systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef RAMINIT_H
-#define RAMINIT_H
-
-#include <compiler.h>
-
-/**
- * Bit Equates
- **/
-#define BIT(x) (1<<x)
-
-#define EBP_TRP_MASK (BIT(1) | BIT(0))
-#define TRP_LOW 3h
-#define TRP_HIGH 5h
-#define EBP_TRP_OFFSET 0 /* Start of TRP field in EBP*/
-#define EBP_TRCD_MASK (BIT(3) | BIT(2))
-#define TRCD_LOW 3h
-#define TRCD_HIGH 5h
-#define EBP_TRCD_OFFSET 2 /* Start of TRCD field in EBP*/
-#define EBP_TCL_MASK (BIT(5) | BIT(4))
-#define TCL_LOW 3 /* Minimum supported CL*/
-#define TCL_HIGH 5 /* Maximum supported CL*/
-#define EBP_TCL_OFFSET 4 /* EBP bit( )for CL mask*/
-#define EBP_DDR2_CL_5_0 BIT(5) /* CL 5.0 = 10b*/
-#define EBP_DDR2_CL_4_0 BIT(4) /* CL 4.0 = 01b*/
-#define EBP_DDR2_CL_3_0 00h /* CL 3.0 = 00b*/
-#define EBP_FREQ_MASK (BIT(10)| BIT(9))
-#define EBP_FREQ_OFFSET 9 /* EBP bit( )for frequency mask*/
-#define EBP_FREQ_400 0 /* 400MHz EBP[10:9] = 00b*/
-#define EBP_FREQ_533 BIT(9) /* 533MHz EBP[10:9] = 01b*/
-#define EBP_REFRESH_MASK (BIT(12)| BIT(11))
-#define EBP_REFRESH_OFFSET 11 /* Bit offset of refresh field*/
-#define EBP_REF_DIS 00h /* Mask for refresh disabled*/
-#define EBP_REF_128CLK BIT(11) /* Mask for 128 clks referesh rate*/
-#define EBP_REF_3_9 BIT(12) /* Mask for 3.9us refresh rate*/
-#define EBP_REF_7_8 (BIT(12)| BIT(11))/* Mask for 7.8us refresh rate*/
-#define EBP_WIDTH_MASK BIT(15)
-#define EBP_WIDTH_OFFSET 15 /* Bit offset of EBP width field*/
-#define EBP_SOCKET_X16 BIT(15) /* Bit mask of x8/x16 bit*/
-#define EBP_DENSITY_MASK (BIT(17)| BIT(16))
-#define EBP_DENSITY_OFFSET 16
-#define EBP_DENSITY_512 BIT(16) /* 512Mbit density*/
-#define EBP_DENSITY_1024 BIT(17) /* 1024Mbit density*/
-#define EBP_DENSITY_2048 (BIT(17)| BIT(16))/* 2048Mbit density*/
-#define EBP_RANKS_MASK BIT(18)
-#define EBP_RANKS_OFFSET 18
-#define EBP_RANKS BIT(18) /* Bit offset of # of ranks bit*/
-#define EBP_PACKAGE_TYPE BIT(19) /* Package type (stacked or not)*/
-#define EBP_2X_MASK BIT(20)
-#define EBP_2X_OFFSET 20 /* Bit offset of ebp 2x refresh field*/
-#define EBP_2X_AUTO_REFRESH BIT(20) /* Bit mask of 2x refresh field*/
-#define EBP_DRAM_PARM_MASK BIT(21)
-#define EBP_DRAM_PARM_OFFSET 21
-#define EBP_DRAM_PARM_SPD 0 /* Use SPD to get DRAM parameters*/
-#define EBP_DRAM_PARM_CMC BIT(21) /* DRAM parameters in CMC binary*/
-#define EBP_BOOT_PATH BIT(31)
-
-
-
-
-#define HB_REG_MCR 0xD0 /* Message Control Register */
-#define HB_REG_MCR_OP_OFFSET 24 /* Offset of the opcode field in MCR */
-#define HB_REG_MCR_PORT_OFFSET 16 /* Offset of the port field in MCR */
-#define HB_REG_MCR_REG_OFFSET 8 /* Offset of the register field in MCR */
-#define HB_REG_MDR 0xD4 /* Message Data Register */
-
-/* SCH Message OpCodes and Attributes*/
-#define SCH_OPCODE_WAKEFULLON 0x2 /* SCH message bus "Wake Full On" opcode*/
-#define SCH_OPCODE_DRAMINIT 0xA0 /* SCH message bus "DRAM Init" opcode */
-#define SCH_DRAMINIT_CMD_MRS 0x4000 /* MRS command */
-#define SCH_DRAMINIT_CMD_EMRS1 0x8 /* EMRS 1 command */
-#define SCH_DRAMINIT_CMD_EMRS2 0x10 /* EMRS 2 command */
-#define SCH_DRAMINIT_CMD_EMRS3 0x18 /* EMRS 3 command */
-#define SCH_DRAMINIT_CMD_CBR 0x1 /* CBR command */
-#define SCH_DRAMINIT_CMD_AREF 0x10001 /* Refresh command, MA10=0->All */
-#define SCH_DRAMINIT_CMD_PALL 0x10002 /* Precharge command, MA10=1->All */
-#define SCH_DRAMINIT_CMD_BACT 0x3 /* Bank activate command */
-#define SCH_DRAMINIT_CMD_NOP 0x7 /* NOP command */
-#define SCH_DRAMINIT_RANK_OFFSET 21 /* Offset of the rank selection bit */
-#define SCH_DRAMINIT_RANK_MASK BIT(21)
-#define SCH_DRAMINIT_ADDR_OFFSET 6 /* Offset of the address field in MDR */
-#define SCH_DRAMINIT_INTLV BIT(3) /* Interleave burst type */
-#define SCH_DRAMINIT_BL4 2 /* Burst Length = 4 */
-#define SCH_DRAMINIT_CL_OFFSET 4 /* CAS Latency bit offset */
-#define SCH_DRAMINIT_OCD_DEFAULT 0xE000 /* OCD Default command */
-#define SCH_DRAMINIT_DQS_DIS BIT(16) /* DQS Disable command */
-#define SCH_OPCODE_READ 0xD0 /* SCH message bus "read" opcode */
-#define SCH_OPCODE_WRITE 0xE0 /* SCH message bus "write" opcode */
-
-/* SCH Message Ports and Registers*/
-
-#define SCH_MSG_DUNIT_PORT 0x1 /* DRAM unit port */
-#define SCH_MSG_DUNIT_REG_DRP 0x0 /* DRAM Rank Population and Interface */
-#define DRP_FIELDS 0xFF /* Pertinent fields in DRP */
-#define DRP_RANK0_OFFSET 3 /* Rank 0 enable offset */
-#define DRP_RANK1_OFFSET 7 /* Rank 1 enable offset */
-#define DRP_DENSITY0_OFFSET 1 /* Density offset - Rank 0 */
-#define DRP_DENSITY1_OFFSET 5 /* Density offset - Rank 1 */
-#define DRP_WIDTH0_OFFSET 0 /* Width offset - Rank 0 */
-#define DRP_WIDTH1_OFFSET 4 /* Width offset - Rank 1 */
-#define DRP_CKE_DIS (BIT(14)| BIT(13)) /* CKE disable bits for both ranks */
-#define DRP_CKE_DIS0 BIT(13) /* CKE disable bit - Rank 0 */
-#define DRP_CKE_DIS1 BIT(14) /* CKE disable bit - Rank 1 */
-#define DRP_SCK_DIS (BIT(11)| BIT(10)) /* SCK/SCKB disable bits */
-#define DRP_SCK_DIS1 BIT(11) /* SCK[1]/SCKB[1] disable */
-#define DRP_SCK_DIS0 BIT(10) /* SCK[0]/SCKB[0] disable */
-#define SCH_MSG_DUNIT_REG_DTR 0x01 /* DRAM Timing Register */
-#define DTR_FIELDS 0x3F /* Pertinent fields in DTR */
-#define DTR_TCL_OFFSET 4 /* CAS latency offset */
-#define DTR_TRCD_OFFSET 2 /* RAS CAS Delay Offset */
-#define DTR_TRP_OFFSET 0 /* RAS Precharge Delay Offset */
-#define SCH_MSG_DUNIT_REG_DCO 0x2 /* DRAM Control Register */
-#define DCO_FIELDS 0xF /* Pertinent fields in DCO */
-#define DCO_REFRESH_OFFSET 2 /* Refresh Rate Field Offset */
-#define DCO_FREQ_OFFSET 0 /* DRAM Frequency Field Offset */
-#define DCO_IC BIT(7) /* Initialization complete bit */
-#define SCH_MSG_PUNIT_PORT 04h /* Punit Port */
-#define SCH_MSG_PUNIT_REG_PCR 71h /* Punit Control Register */
-#define SCH_MSG_TEST_PORT 05h /* Test port */
-#define SCH_MSG_TEST_REG_MSR 03h /* Mode and Status Register */
-
-
-/* Jedec initialization mapping into the MDR address field for DRAM init messages*/
-
-
-#define SCH_JEDEC_DLLRESET BIT(8) /* DLL Reset bit( ) */
-#define SCH_JEDEC_INTLV BIT(3) /* Interleave/NOT(Sequential) bit( ) */
-#define SCH_JEDEC_CL_OFFSET 4 /* Offset of the CAS latency field */
-#define SCH_JEDEC_OCD_DEFAULT (BIT(7)| BIT(8)| BIT(9)) /* OCD default value */
-#define SCH_JEDEC_DQS_DIS BIT(10) /* DQS disable bit */
-#define SCH_JEDEC_BL4 BIT(1) /* Burst length 4 value */
-/*static values used during JEDEC iniatialization. These values are not
-dependent on memory or chipset configuration.*/
-#define JEDEC_STATIC_PARAM ((SCH_JEDEC_INTLV << SCH_DRAMINIT_ADDR_OFFSET) + (SCH_JEDEC_BL4 << SCH_DRAMINIT_ADDR_OFFSET))
-
-#define DIMM_SOCKETS 2
-
-#define DIMM_SPD_BASE 0x50
-#define DIMM_TCO_BASE 0x30
-
-/* Burst length is always 8 */
-#define BURSTLENGTH 8
-#define RAM_PARAM_SOURCE_SOFTSTRAP 1
-#define RAM_PARAM_SOURCE_SPD 0
-struct sys_info {
-
- u16 memory_frequency; /* 400 or 533*/
- u16 fsb_frequency; /* 400 or 533*/
-
- u8 trp; /*3,4,5 DRAM clocks */
- u8 trcd; /*3,4,5 DRAM clocks */
- u8 cl; /*CAS Latency 3,4,5*/
-
- u8 refresh; /*Refresh rate disabled,128 DRAM clocks,3.9us,7.8us */
-
- u8 data_width; /*x8/x16 data width */
- u8 device_density; /*SDRAM Device Density 512/1024/2048Mbit */
- u8 ranks; /*Single/Double */
- u8 ram_param_source; /*DRAM Parameter Source SPD/SoftStraps(R) Block (down memory) */
- u8 boot_path;
-
-} __packed;
-
-void sdram_initialize(int boot_mode);
-
-#endif /* RAMINIT_H */
diff --git a/src/soc/intel/sch/reset.c b/src/soc/intel/sch/reset.c
deleted file mode 100644
index 91bcd690ca..0000000000
--- a/src/soc/intel/sch/reset.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <arch/io.h>
-#include <reset.h>
-
-void do_soft_reset(void)
-{
- outb(0x04, 0xcf9);
-}
-
-void do_hard_reset(void)
-{
- outb(0x02, 0xcf9);
- outb(0x06, 0xcf9);
-}
diff --git a/src/soc/intel/sch/sch.h b/src/soc/intel/sch/sch.h
deleted file mode 100644
index bdaddb296b..0000000000
--- a/src/soc/intel/sch/sch.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2010 coresystems GmbH
- * Copyright (C) 2009-2010 iWave Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __SCH_POULSBO_H__
-#define __SCH_POULSBO_H__
-
-#if !defined(__ASSEMBLER__)
-int sch_port_access_read(int port, int reg, int bytes);
-void sch_port_access_write(int port, int reg, int bytes, long data);
-void sch_port_access_write_ram_cmd(int cmd, int port, int reg, int data);
-#endif
-
-/* Southbridge IO BARs */
-/* TODO Make sure these don't get changed by stage2 */
-#define SCH_ENABLE_BIT (1<<31)
-#define DEFAULT_ACPIPBLKBASE 0x510
-
-#define DEFAULT_SMBUSBASE 0x540
-#define DEFAULT_GPIOBASE 0x588
-#define DEFAULT_GPE0BASE 0x5C0
-#define DEFAULT_SMMCNTRLBASE 0x3F703F76
-
-#define DEFAULT_RCBABASE ((u8 *)0xfed1c000)
-
-#define DEFAULT_PCIEXBAR CONFIG_MMCONF_BASE_ADDRESS /* 4 KB per PCIe device */
-
-/* IGD */
-#define GGC 0x52
-
-/* Root Complex Register Block */
-#define RCBA8(x) *((volatile u8 *)(DEFAULT_RCBABASE + x))
-#define RCBA16(x) *((volatile u16 *)(DEFAULT_RCBABASE + x))
-#define RCBA32(x) *((volatile u32 *)(DEFAULT_RCBABASE + x))
-
-/* FIXME: should probably be in southbridge, but is setup in romstage, too */
-#define CMC_SHADOW 0x3faf0000
-
-#define DEFAULT_PMBASE 0x500
-
-/* SMBus I/O bits. */
-#define SMBHSTSTAT 0x0
-#define SMBHSTCTL 0x2
-#define SMBHSTCMD 0x3
-#define SMBXMITADD 0x4
-#define SMBHSTDAT0 0x5
-#define SMBHSTDAT1 0x6
-#define SMBBLKDAT 0x7
-#define SMBTRNSADD 0x9
-#define SMBSLVDATA 0xa
-#define SMLINK_PIN_CTL 0xe
-#define SMBUS_PIN_CTL 0xf
-
-#define SMBUS_TIMEOUT (10 * 1000 * 100)
-
-#endif /* __SCH_POULSBO_H__ */
diff --git a/src/soc/intel/sch/smbus.c b/src/soc/intel/sch/smbus.c
deleted file mode 100644
index 54baa68228..0000000000
--- a/src/soc/intel/sch/smbus.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/path.h>
-#include <device/smbus.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <arch/io.h>
-#include "sch.h"
-#include "smbus.h"
-
-static int lsmbus_read_byte(device_t dev, u8 address)
-{
- u16 device;
- struct resource *res;
- struct bus *pbus;
-
- device = dev->path.i2c.device;
- pbus = get_pbus_smbus(dev);
- res = find_resource(pbus->dev, 0x20);
-
- return do_smbus_read_byte(res->base, device, address);
-}
-
-static struct smbus_bus_operations lops_smbus_bus = {
- .read_byte = lsmbus_read_byte,
-};
-
-static void smbus_set_subsystem(device_t dev, unsigned vendor, unsigned device)
-{
- if (!vendor || !device) {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- pci_read_config32(dev, PCI_VENDOR_ID));
- } else {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- ((device & 0xffff) << 16) | (vendor & 0xffff));
- }
-}
-
-static struct pci_operations smbus_pci_ops = {
- .set_subsystem = smbus_set_subsystem,
-};
-
-static struct device_operations smbus_ops = {
- .read_resources = pci_dev_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .init = 0,
- .scan_bus = scan_smbus,
- .ops_smbus_bus = &lops_smbus_bus,
- .ops_pci = &smbus_pci_ops,
-};
-
-// FIXME
-/* 82801GB/GR/GDH/GBM/GHM/GU (ICH7/ICH7R/ICH7DH/ICH7-M/ICH7-M DH/ICH7-U) */
-static const struct pci_driver i82801gx_smbus __pci_driver = {
- .ops = &smbus_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x27da,
-};
diff --git a/src/soc/intel/sch/smbus.h b/src/soc/intel/sch/smbus.h
deleted file mode 100644
index 19d70b6451..0000000000
--- a/src/soc/intel/sch/smbus.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com>
- * Copyright (C) 2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <device/smbus_def.h>
-
-static void smbus_delay(void)
-{
- inb(0x80);
-}
-
-static int smbus_wait_until_ready(u16 smbus_base)
-{
- unsigned loops = SMBUS_TIMEOUT;
- unsigned char byte;
- do {
- smbus_delay();
- if (--loops == 0)
- break;
- byte = inb(smbus_base + SMBHSTSTAT);
- } while (byte & 1);
- return loops ? 0 : -1;
-}
-
-static int smbus_wait_until_done(u16 smbus_base)
-{
- unsigned loops = SMBUS_TIMEOUT;
- unsigned char byte;
- do {
- smbus_delay();
- if (--loops == 0)
- break;
- byte = inb(smbus_base + SMBHSTSTAT);
- } while ((byte & 1) || (byte & ~((1 << 6) | (1 << 0))) == 0);
- return loops ? 0 : -1;
-}
-
-static int do_smbus_read_byte(unsigned smbus_base, unsigned device,
- unsigned address)
-{
- unsigned char global_status_register;
- unsigned char byte;
-
- if (smbus_wait_until_ready(smbus_base) < 0) {
- return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
- }
- /* Setup transaction */
- /* Disable interrupts */
- outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
- /* Set the device I'm talking to */
- outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD);
- /* Set the command/address... */
- outb(address & 0xff, smbus_base + SMBHSTCMD);
- /* Set up for a byte data read */
- outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2),
- (smbus_base + SMBHSTCTL));
- /* Clear any lingering errors, so the transaction will run */
- outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
-
- /* Clear the data byte... */
- outb(0, smbus_base + SMBHSTDAT0);
-
- /* Start the command */
- outb((inb(smbus_base + SMBHSTCTL) | 0x40), smbus_base + SMBHSTCTL);
-
- /* Poll for transaction completion */
- if (smbus_wait_until_done(smbus_base) < 0) {
- return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
- }
-
- global_status_register = inb(smbus_base + SMBHSTSTAT);
-
- /* Ignore the "In Use" status... */
- global_status_register &= ~(3 << 5);
-
- /* Read results of transaction */
- byte = inb(smbus_base + SMBHSTDAT0);
- if (global_status_register != (1 << 1)) {
- return SMBUS_ERROR;
- }
- return byte;
-}
diff --git a/src/soc/intel/sch/smi.c b/src/soc/intel/sch/smi.c
deleted file mode 100644
index 7e5ce241f9..0000000000
--- a/src/soc/intel/sch/smi.c
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <device/device.h>
-#include <device/pci.h>
-#include <console/console.h>
-#include <arch/io.h>
-#include <cpu/x86/cache.h>
-#include <cpu/x86/smm.h>
-#include <cpu/cpu.h>
-#include <string.h>
-#include "chip.h"
-#include "sch.h"
-
-/* I945 */
-#define SMRAM 0x9d
-#define D_OPEN (1 << 6)
-#define D_CLS (1 << 5)
-#define D_LCK (1 << 4)
-#define G_SMRAME (1 << 3)
-#define C_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0))
-
-/* ICH7 */
-#define PM1_STS 0x00
-#define PM1_EN 0x02
-#define PM1_CNT 0x04
-#define PM1_TMR 0x08
-#define PROC_CNT 0x10
-#define LV2 0x14
-#define LV3 0x15
-#define LV4 0x16
-#define PM2_CNT 0x20 // mobile only
-#define GPE0_STS 0x28
-#define GPE0_EN 0x2c
-#define SMI_EN 0x30
-#define EL_SMI_EN (1 << 25) // Intel Quick Resume Technology
-#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic
-#define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic
-#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS
-#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al)
-#define MCSMI_EN (1 << 11) // Trap microcontroller range access
-#define BIOS_RLS (1 << 7) // asserts SCI on bit set
-#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set
-#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI#
-#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI#
-#define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic
-#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit
-#define EOS (1 << 1) // End of SMI (deassert SMI#)
-#define GBL_SMI_EN (1 << 0) // SMI# generation at all?
-#define SMI_STS 0x34
-#define ALT_GP_SMI_EN 0x38
-#define ALT_GP_SMI_STS 0x3a
-#define GPE_CNTL 0x42
-#define DEVACT_STS 0x44
-#define SS_CNT 0x50
-#define C3_RES 0x54
-
-/* While we read PMBASE dynamically in case it changed, let's
- * initialize it with a sane value
- */
-
-static u16 pmbase = DEFAULT_PMBASE;
-/**
- * @brief read and clear PM1_STS
- * @return PM1_STS register
- */
-static u16 reset_pm1_status(void)
-{
- u16 reg16;
-
- reg16 = inw(pmbase + PM1_STS);
- /* set status bits are cleared by writing 1 to them */
- outw(reg16, pmbase + PM1_STS);
-
- return reg16;
-}
-
-static void dump_pm1_status(u16 pm1_sts)
-{
- printk(BIOS_DEBUG, "PM1_STS: ");
- if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK ");
- if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK ");
- if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR ");
- if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC ");
- if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN ");
- if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL ");
- if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM ");
- if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF ");
- printk(BIOS_DEBUG, "\n");
-}
-
-/**
- * @brief read and clear SMI_STS
- * @return SMI_STS register
- */
-static u32 reset_smi_status(void)
-{
- u32 reg32;
-
- reg32 = inl(pmbase + SMI_STS);
- /* set status bits are cleared by writing 1 to them */
- outl(reg32, pmbase + SMI_STS);
-
- return reg32;
-}
-
-static void dump_smi_status(u32 smi_sts)
-{
- printk(BIOS_DEBUG, "SMI_STS: ");
- if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
- if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI ");
- if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
- if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
- if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
- if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 ");
- if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI ");
- if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI ");
- if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC ");
- if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO ");
- if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON ");
- if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI ");
- if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI ");
- if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 ");
- if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 ");
- if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR ");
- if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM ");
- if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI ");
- if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB ");
- if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS ");
- printk(BIOS_DEBUG, "\n");
-}
-
-/**
- * @brief read and clear GPE0_STS
- * @return GPE0_STS register
- */
-static u32 reset_gpe0_status(void)
-{
- u32 reg32;
-
- reg32 = inl(pmbase + GPE0_STS);
- /* set status bits are cleared by writing 1 to them */
- outl(reg32, pmbase + GPE0_STS);
-
- return reg32;
-}
-
-static void dump_gpe0_status(u32 gpe0_sts)
-{
- int i;
- printk(BIOS_DEBUG, "GPE0_STS: ");
- for (i=31; i>= 16; i--) {
- if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16));
- }
- if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 ");
- if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 ");
- if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 ");
- if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME ");
- if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW ");
- if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP ");
- if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI ");
- if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK ");
- if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI ");
- if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 ");
- if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 ");
- if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 ");
- if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG ");
- if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM ");
- printk(BIOS_DEBUG, "\n");
-}
-
-/**
- * @brief read and clear TCOx_STS
- * @return TCOx_STS registers
- */
-static u32 reset_tco_status(void)
-{
- u32 tcobase = pmbase + 0x60;
- u32 reg32;
-
- reg32 = inl(tcobase + 0x04);
- /* set status bits are cleared by writing 1 to them */
- outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS
- if (reg32 & (1 << 18))
- outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS
-
- return reg32;
-}
-
-static void dump_tco_status(u32 tco_sts)
-{
- printk(BIOS_DEBUG, "TCO_STS: ");
- if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV ");
- if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT ");
- if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO ");
- if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET ");
- if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR ");
- if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI ");
- if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI ");
- if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR ");
- if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY ");
- if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT ");
- if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT ");
- if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO ");
- if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI ");
- printk(BIOS_DEBUG, "\n");
-}
-
-/**
- * @brief Set the EOS bit
- */
-static void smi_set_eos(void)
-{
-// FIXME: disabled until SMM actually works
-#if 0
- u8 reg8;
-
- reg8 = inb(pmbase + SMI_EN);
- reg8 |= EOS;
- outb(reg8, pmbase + SMI_EN);
-#endif
-}
-
-extern uint8_t smm_relocation_start, smm_relocation_end;
-
-static void smm_relocate(void)
-{
- u32 smi_en;
-
- printk(BIOS_DEBUG, "Initializing SMM handler...");
-
- pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), 0x40) & 0xfffc;
- printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase);
-
- smi_en = inl(pmbase + SMI_EN);
- if (smi_en & APMC_EN) {
- printk(BIOS_INFO, "SMI# handler already enabled?\n");
- return;
- }
-
- /* copy the SMM relocation code */
- memcpy((void *)0x38000, &smm_relocation_start,
- &smm_relocation_end - &smm_relocation_start);
-
- printk(BIOS_DEBUG, "\n");
- dump_smi_status(reset_smi_status());
- dump_pm1_status(reset_pm1_status());
- dump_gpe0_status(reset_gpe0_status());
- dump_tco_status(reset_tco_status());
-
- /* Enable SMI generation:
- * - on TCO events
- * - on APMC writes (io 0xb2)
- * - on writes to SLP_EN (sleep states)
- * - on writes to GBL_RLS (bios commands)
- * No SMIs:
- * - on microcontroller writes (io 0x62/0x66)
- */
- outl(smi_en | (TCO_EN | APMC_EN | SLP_SMI_EN | BIOS_EN |
- EOS | GBL_SMI_EN), pmbase + SMI_EN);
-
- /**
- * There are several methods of raising a controlled SMI# via
- * software, among them:
- * - Writes to io 0xb2 (APMC)
- * - Writes to the Local Apic ICR with Delivery mode SMI.
- *
- * Using the local apic is a bit more tricky. According to
- * AMD Family 11 Processor BKDG no destination shorthand must be
- * used.
- * The whole SMM initialization is quite a bit hardware specific, so
- * I'm not too worried about the better of the methods at the moment
- */
-
- /* raise an SMI interrupt */
- printk(BIOS_SPEW, " ... raise SMI#\n");
- outb(0x00, 0xb2);
-}
-
-static void smm_install(void)
-{
- /* enable the SMM memory window */
- pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM,
- D_OPEN | G_SMRAME | C_BASE_SEG);
-
- /* copy the real SMM handler */
- memcpy((void *)0xa0000, _binary_smm_start,
- _binary_smm_end - _binary_smm_start);
- wbinvd();
-
- /* close the SMM memory window and enable normal SMM */
- pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM,
- G_SMRAME | C_BASE_SEG);
-}
-
-void smm_init(void)
-{
- smm_relocate();
- smm_install();
- smi_set_eos();
-}
-
-void smm_init_completion(void)
-{
-}
-
-void smm_lock(void)
-{
- /* LOCK the SMM memory window and enable normal SMM.
- * After running this function, only a full reset can
- * make the SMM registers writable again.
- */
- printk(BIOS_DEBUG, "Locking SMM.\n");
- pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM,
- D_LCK | G_SMRAME | C_BASE_SEG);
-}
-
-void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
-{
- /* The GDT or coreboot table is going to live here. But a long time
- * after we relocated the GNVS, so this is not troublesome.
- */
- *(u32 *)0x500 = (u32)gnvs;
- *(u32 *)0x504 = (u32)tcg;
- *(u32 *)0x508 = (u32)smi1;
- outb(0xea, 0xb2);
-}
diff --git a/src/soc/intel/sch/smihandler.c b/src/soc/intel/sch/smihandler.c
deleted file mode 100644
index 6982f58e82..0000000000
--- a/src/soc/intel/sch/smihandler.c
+++ /dev/null
@@ -1,399 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <arch/io.h>
-#include <console/console.h>
-#include <cpu/x86/cache.h>
-#include <cpu/x86/smm.h>
-#include "sch.h"
-
-#define DEBUG_SMI
-
-/* I945 */
-#define SMRAM 0x9d
-#define D_OPEN (1 << 6)
-#define D_CLS (1 << 5)
-#define D_LCK (1 << 4)
-#define G_SMRANE (1 << 3)
-#define C_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0))
-
-/* ICH7 */
-#define PM1_STS 0x00
-#define PM1_EN 0x02
-#define PM1_CNT 0x04
-#define PM1_TMR 0x08
-#define PROC_CNT 0x10
-#define LV2 0x14
-#define LV3 0x15
-#define LV4 0x16
-#define PM2_CNT 0x20 // mobile only
-#define GPE0_STS 0x28
-#define GPE0_EN 0x2c
-#define SMI_EN 0x30
-#define EL_SMI_EN (1 << 25) // Intel Quick Resume Technology
-#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic
-#define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic
-#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS
-#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al)
-#define MCSMI_EN (1 << 11) // Trap microcontroller range access
-#define BIOS_RLS (1 << 7) // asserts SCI on bit set
-#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set
-#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI#
-#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI#
-#define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic
-#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit
-#define EOS (1 << 1) // End of SMI (deassert SMI#)
-#define GBL_SMI_EN (1 << 0) // SMI# generation at all?
-#define SMI_STS 0x34
-#define ALT_GP_SMI_EN 0x38
-#define ALT_GP_SMI_STS 0x3a
-#define GPE_CNTL 0x42
-#define DEVACT_STS 0x44
-#define SS_CNT 0x50
-#define C3_RES 0x54
-
-//#include "i82801gx_nvs.h"
-
-/* While we read PMBASE dynamically in case it changed, let's
- * initialize it with a sane value
- */
-static u16 pmbase = DEFAULT_PMBASE;
-
-// disabled because SMM doesn't actually work yet
-#if 0
-/**
- * @brief read and clear PM1_STS
- * @return PM1_STS register
- */
-static u16 reset_pm1_status(void)
-{
- u16 reg16;
-
- reg16 = inw(pmbase + PM1_STS);
- /* set status bits are cleared by writing 1 to them */
- outw(reg16, pmbase + PM1_STS);
-
- return reg16;
-}
-
-static void dump_pm1_status(u16 pm1_sts)
-{
- printk(BIOS_DEBUG, "PM1_STS: ");
- if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK ");
- if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK ");
- if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR ");
- if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC ");
- if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN ");
- if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL ");
- if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM ");
- if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF ");
- printk(BIOS_DEBUG, "\n");
-}
-
-/**
- * @brief read and clear SMI_STS
- * @return SMI_STS register
- */
-static u32 reset_smi_status(void)
-{
- u32 reg32;
-
- reg32 = inl(pmbase + SMI_STS);
- /* set status bits are cleared by writing 1 to them */
- outl(reg32, pmbase + SMI_STS);
-
- return reg32;
-}
-
-static void dump_smi_status(u32 smi_sts)
-{
- printk(BIOS_DEBUG, "SMI_STS: ");
- if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
- if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI ");
- if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
- if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
- if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
- if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 ");
- if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI ");
- if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI ");
- if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC ");
- if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO ");
- if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON ");
- if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI ");
- if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI ");
- if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 ");
- if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 ");
- if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR ");
- if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM ");
- if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI ");
- if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB ");
- if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS ");
- printk(BIOS_DEBUG, "\n");
-}
-
-
-/**
- * @brief read and clear GPE0_STS
- * @return GPE0_STS register
- */
-static u32 reset_gpe0_status(void)
-{
- u32 reg32;
-
- reg32 = inl(pmbase + GPE0_STS);
- /* set status bits are cleared by writing 1 to them */
- outl(reg32, pmbase + GPE0_STS);
-
- return reg32;
-}
-
-static void dump_gpe0_status(u32 gpe0_sts)
-{
- int i;
- printk(BIOS_DEBUG, "GPE0_STS: ");
- for (i=31; i>= 16; i--) {
- if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16));
- }
- if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 ");
- if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 ");
- if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 ");
- if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME ");
- if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW ");
- if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP ");
- if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI ");
- if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK ");
- if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI ");
- if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 ");
- if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 ");
- if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 ");
- if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG ");
- if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM ");
- printk(BIOS_DEBUG, "\n");
-}
-
-
-/**
- * @brief read and clear TCOx_STS
- * @return TCOx_STS registers
- */
-static u32 reset_tco_status(void)
-{
- u32 tcobase = pmbase + 0x60;
- u32 reg32;
-
- reg32 = inl(tcobase + 0x04);
- /* set status bits are cleared by writing 1 to them */
- outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS
- if (reg32 & (1 << 18))
- outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS
-
- return reg32;
-}
-
-
-static void dump_tco_status(u32 tco_sts)
-{
- printk(BIOS_DEBUG, "TCO_STS: ");
- if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV ");
- if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT ");
- if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO ");
- if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET ");
- if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR ");
- if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI ");
- if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI ");
- if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR ");
- if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY ");
- if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT ");
- if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT ");
- if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO ");
- if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI ");
- printk(BIOS_DEBUG, "\n");
-}
-#endif
-
-int southbridge_io_trap_handler(int smif)
-{
- //global_nvs_t *gnvs = (global_nvs_t *)0xc00;
-
- switch (smif) {
- case 0x32:
- printk(BIOS_DEBUG, "OS Init\n");
- //gnvs->smif = 0;
- break;
- default:
- /* Not handled */
- return 0;
- }
-
- /* On success, the IO Trap Handler returns 0
- * On failure, the IO Trap Handler returns a value != 0
- *
- * For now, we force the return value to 0 and log all traps to
- * see what's going on.
- */
- //gnvs->smif = 0;
- return 1; /* IO trap handled */
-}
-
-/**
- * @brief Set the EOS bit
- */
-void southbridge_smi_set_eos(void)
-{
- u8 reg8;
-
- reg8 = inb(pmbase + SMI_EN);
- reg8 |= EOS;
- outb(reg8, pmbase + SMI_EN);
-}
-
-/**
- * @brief Interrupt handler for SMI#
- * @param node
- * @param state_save
- */
-void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_save)
-{
-// FIXME: the necessary magic isn't available yet. the code
-// below is a partially adapted ICH7 version of the handler
-#if 0
- u8 reg8;
- u16 pmctrl;
- u16 pm1_sts;
- u32 smi_sts, gpe0_sts, tco_sts;
-
- pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x48) & 0xfffc;
- printk(BIOS_SPEW, "SMI#: pmbase = 0x%04x\n", pmbase);
-
- /* We need to clear the SMI status registers, or we won't see what's
- * happening in the following calls.
- */
- smi_sts = reset_smi_status();
- dump_smi_status(smi_sts);
-
- if (smi_sts & (1 << 21)) { // MONITOR
- global_nvs_t *gnvs = (global_nvs_t *)0xc00;
- u32 reg32;
-
- reg32 = RCBA32(0x1e00); TRSR - Trap Status Register
-//#if 0
- /* Comment in for some useful debug */
- for (i=0; i<4; i++) {
- if (reg32 & (1 << i)) {
- printk(BIOS_DEBUG, " io trap #%d\n", i);
- }
- }
-//#endif
- RCBA32(0x1e00) = reg32; TRSR
-
- reg32 = RCBA32(0x1e10);
-
- if ((reg32 & 0xfffc) != 0x808) {
- printk(BIOS_DEBUG, " trapped io address = 0x%x\n", reg32 & 0xfffc);
- printk(BIOS_DEBUG, " AHBE = %x\n", (reg32 >> 16) & 0xf);
- printk(BIOS_DEBUG, " read/write: %s\n", (reg32 & (1 << 24)) ? "read" :
- "write");
- }
-
- if (!(reg32 & (1 << 24))) {
- /* Write Cycle */
- reg32 = RCBA32(0x1e18);
- printk(BIOS_DEBUG, " iotrap written data = 0x%08x\n", reg32);
-
- }
-
- if (gnvs->smif)
- io_trap_handler(gnvs->smif); // call function smif
- }
-
- if (smi_sts & (1 << 13)) { // TCO
- tco_sts = reset_tco_status();
- dump_tco_status(tco_sts);
-
- if (tco_sts & (1 << 8)) { // BIOSWR
- u8 bios_cntl;
- bios_cntl = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0xdc);
- if (bios_cntl & 1) {
- /* BWE is RW, so the SMI was caused by a
- * write to BWE, not by a write to the BIOS
- */
-
- /* This is the place where we notice someone
- * is trying to tinker with the BIOS. We are
- * trying to be nice and just ignore it. A more
- * resolute answer would be to power down the
- * box.
- */
- printk(BIOS_DEBUG, "Switching back to RO\n");
- pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1));
- } /* No else for now? */
- }
- }
-
- if (smi_sts & (1 << 8)) { // PM1
- pm1_sts = reset_pm1_status();
- dump_pm1_status(pm1_sts);
- }
-
- if (smi_sts & (1 << 9)) { // GPE0
- gpe0_sts = reset_gpe0_status();
- dump_gpe0_status(gpe0_sts);
- }
-
- if (smi_sts & (1 << 5)) { // APM
- /* Emulate B2 register as the FADT / Linux expects it */
-
- reg8 = inb(0xb2);
- switch (reg8) {
- case ACPI_DISABLE:
- pmctrl = inw(pmbase + 0x04);
- pmctrl |= (1 << 0);
- outw(pmctrl, pmbase + 0x04);
- printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n");
- break;
- case ACPI_ENABLE:
- pmctrl = inw(pmbase + 0x04);
- pmctrl &= ~(1 << 0);
- outw(pmctrl, pmbase + 0x04);
- printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n");
- break;
- }
- }
-
- if (smi_sts & (1 << 4)) { // SLP_SMI
- u32 reg32;
-
- /* First, disable further SMIs */
- reg8 = inb(pmbase + SMI_EN);
- reg8 &= ~SLP_SMI_EN;
- outb(reg8, pmbase + SMI_EN);
-
- /* Next, do the deed, we should change
- * power on after power loss bits here
- * if we're going to S5
- */
-
- /* Write back to the SLP register to cause the
- * originally intended event again. We need to set BIT13
- * (SLP_EN) though to make the sleep happen.
- */
- reg32 = inl(pmbase + 0x04);
- printk(BIOS_DEBUG, "SMI#: SLP = 0x%08x\n", reg32);
- printk(BIOS_DEBUG, "SMI#: Powering off.\n");
- outl(reg32 | (1 << 13), pmbase + 0x04);
- }
-#endif
-}
diff --git a/src/soc/intel/sch/south.c b/src/soc/intel/sch/south.c
deleted file mode 100644
index b096ab69f7..0000000000
--- a/src/soc/intel/sch/south.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-
-struct chip_operations southbridge_intel_sch_ops = {
- CHIP_NAME("Intel SCH Southbridge")
-};
diff --git a/src/soc/intel/sch/usb.c b/src/soc/intel/sch/usb.c
deleted file mode 100644
index a7ada4b8f1..0000000000
--- a/src/soc/intel/sch/usb.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2010 coresystems GmbH
- * Copyright (C) 2009-2010 iWave Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-
-static void usb_init(struct device *dev)
-{
- u32 reg32;
-
- /* USB Specification says the device must be Bus Master. */
- printk(BIOS_DEBUG, "UHCI: Setting up controller.. ");
-
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
- /* Disable clock gating. */
- reg32 = pci_read_config32(dev, 0xFC);
- reg32 |= (1 << 2);
- pci_write_config32(dev, 0xFC, reg32);
- pci_write_config8(dev, 0xF8, 0x86);
- pci_write_config8(dev, 0xF9, 0x0F);
- pci_write_config8(dev, 0xFA, 0x06);
- reg32 = pci_read_config32(dev, 0x4);
- printk(BIOS_DEBUG, "PCI_COMMAND %x.\n", reg32);
- reg32 = pci_read_config32(dev, 0x20);
- printk(BIOS_DEBUG, "PCI_BASE %x.\n", reg32);
- reg32 = pci_read_config32(dev, 0xFC);
- printk(BIOS_DEBUG, "PCI_FD %x.\n", reg32);
- printk(BIOS_DEBUG, "done.\n");
-}
-
-static void usb_set_subsystem(device_t dev, unsigned vendor, unsigned device)
-{
- if (!vendor || !device) {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- pci_read_config32(dev, PCI_VENDOR_ID));
- } else {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- ((device & 0xffff) << 16) | (vendor & 0xffff));
- }
-}
-
-static struct pci_operations usb_pci_ops = {
- .set_subsystem = usb_set_subsystem,
-};
-
-static struct device_operations usb_ops = {
- .read_resources = pci_dev_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .init = usb_init,
- .scan_bus = 0,
- .ops_pci = &usb_pci_ops,
-};
-
-static const struct pci_driver sch_usb0 __pci_driver = {
- .ops = &usb_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8114,
-};
-
-static const struct pci_driver sch_usb1 __pci_driver = {
- .ops = &usb_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8115,
-};
-
-static const struct pci_driver sch_usb2 __pci_driver = {
- .ops = &usb_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8116,
-};
diff --git a/src/soc/intel/sch/usb_client.c b/src/soc/intel/sch/usb_client.c
deleted file mode 100644
index 02f5b8253c..0000000000
--- a/src/soc/intel/sch/usb_client.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009-2010 iWave Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-
-static void usb_client_init(struct device *dev)
-{
- u32 reg32;
-
- printk(BIOS_DEBUG, "USB Client: Setting up controller.. ");
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- reg32 |= PCI_COMMAND_MASTER;
- reg32 |= PCI_COMMAND_MEMORY;
- pci_write_config32(dev, PCI_COMMAND, reg32);
- printk(BIOS_DEBUG, "done.\n");
-}
-
-static void usb_client_set_subsystem(device_t dev, unsigned vendor, unsigned device)
-{
- if (!vendor || !device) {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- pci_read_config32(dev, PCI_VENDOR_ID));
- } else {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- ((device & 0xffff) << 16) | (vendor & 0xffff));
- }
-}
-
-static struct pci_operations lops_pci = {
- .set_subsystem = &usb_client_set_subsystem,
-};
-
-static struct device_operations usb_client_ops = {
- .read_resources = pci_dev_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .init = usb_client_init,
- .scan_bus = 0,
- .ops_pci = &lops_pci,
-};
-
-static const struct pci_driver sch_usb_client __pci_driver = {
- .ops = &usb_client_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8118,
-};
diff --git a/src/soc/intel/sch/usb_ehci.c b/src/soc/intel/sch/usb_ehci.c
deleted file mode 100644
index 8191d0aba7..0000000000
--- a/src/soc/intel/sch/usb_ehci.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2010 coresystems GmbH
- * Copyright (C) 2009-2010 iWave Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-
-static void usb_ehci_init(struct device *dev)
-{
- u32 reg32;
-
- printk(BIOS_DEBUG, "EHCI: Setting up controller.. ");
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- reg32 |= PCI_COMMAND_MASTER;
- pci_write_config32(dev, PCI_COMMAND, reg32);
- /* Disable clock gating */
-#if 0
- reg32 = pci_read_config32(dev, 0xc0);
- reg32 |= (1 << 2);
- pci_write_config32(dev, 0xc0, reg32);
-#endif
- // pci_write_config32(dev, 0x3c, 0x17);
- reg32 = pci_read_config32(dev, 0xFC);
- reg32 |= (1 << 28);
- pci_write_config32(dev, 0xFC, reg32);
-
- reg32 = pci_read_config32(dev, 0x4);
- printk(BIOS_DEBUG, "PCI_COMMAND %x.\n", reg32);
- reg32 = pci_read_config32(dev, 0x20);
- printk(BIOS_DEBUG, "PCI_BASE %x.\n", reg32);
- reg32 = pci_read_config32(dev, 0xC0);
- printk(BIOS_DEBUG, "PCI_FD %x.\n", reg32);
- printk(BIOS_DEBUG, "done.\n");
-}
-
-static void usb_ehci_set_subsystem(device_t dev, unsigned vendor,
- unsigned device)
-{
- u8 access_cntl;
-
- access_cntl = pci_read_config8(dev, 0x80);
-
- /* Enable writes to protected registers. */
- pci_write_config8(dev, 0x80, access_cntl | 1);
-
- if (!vendor || !device) {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- pci_read_config32(dev, PCI_VENDOR_ID));
- } else {
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- ((device & 0xffff) << 16) | (vendor & 0xffff));
- }
-
- /* Restore protection. */
- pci_write_config8(dev, 0x80, access_cntl);
-}
-
-static struct pci_operations lops_pci = {
- .set_subsystem = &usb_ehci_set_subsystem,
-};
-
-static struct device_operations usb_ehci_ops = {
- .read_resources = pci_dev_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = pci_dev_enable_resources,
- .init = usb_ehci_init,
- .scan_bus = 0,
- .ops_pci = &lops_pci,
-};
-
-static const struct pci_driver sch_usb_ehci __pci_driver = {
- .ops = &usb_ehci_ops,
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = 0x8117,
-};