summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/northbridge/intel/sandybridge/Makefile.inc2
-rw-r--r--src/northbridge/intel/sandybridge/raminit.c502
-rw-r--r--src/northbridge/intel/sandybridge/raminit_common.h8
-rw-r--r--src/northbridge/intel/sandybridge/raminit_ivy.c514
-rw-r--r--src/northbridge/intel/sandybridge/raminit_sandy.c514
5 files changed, 1053 insertions, 487 deletions
diff --git a/src/northbridge/intel/sandybridge/Makefile.inc b/src/northbridge/intel/sandybridge/Makefile.inc
index cc0228bf79..a40fa157ef 100644
--- a/src/northbridge/intel/sandybridge/Makefile.inc
+++ b/src/northbridge/intel/sandybridge/Makefile.inc
@@ -27,6 +27,8 @@ romstage-y += ram_calc.c
ifeq ($(CONFIG_USE_NATIVE_RAMINIT),y)
romstage-y += raminit.c
romstage-y += raminit_common.c
+romstage-y += raminit_sandy.c
+romstage-y += raminit_ivy.c
romstage-y += ../../../device/dram/ddr3.c
else
romstage-y += raminit_mrc.c
diff --git a/src/northbridge/intel/sandybridge/raminit.c b/src/northbridge/intel/sandybridge/raminit.c
index 4d18c0b6b7..2bb43ce8da 100644
--- a/src/northbridge/intel/sandybridge/raminit.c
+++ b/src/northbridge/intel/sandybridge/raminit.c
@@ -277,377 +277,6 @@ static void dram_find_spds_ddr3(spd_raw_data *spd, ramctr_timing *ctrl)
die("No DIMMs were found");
}
-/* Frequency multiplier. */
-static u32 get_FRQ(u32 tCK)
-{
- u32 FRQ;
- FRQ = 256000 / (tCK * BASEFREQ);
- if (FRQ > 8)
- return 8;
- if (FRQ < 3)
- return 3;
- return FRQ;
-}
-
-static u32 get_REFI(u32 tCK)
-{
- /* Get REFI based on MCU frequency using the following rule:
- * _________________________________________
- * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
- * REFI: | 3120 | 4160 | 5200 | 6240 | 7280 | 8320 |
- */
- static const u32 frq_refi_map[] =
- { 3120, 4160, 5200, 6240, 7280, 8320 };
- return frq_refi_map[get_FRQ(tCK) - 3];
-}
-
-static u8 get_XSOffset(u32 tCK)
-{
- /* Get XSOffset based on MCU frequency using the following rule:
- * _________________________
- * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
- * XSOffset : | 4 | 6 | 7 | 8 | 10 | 11 |
- */
- static const u8 frq_xs_map[] = { 4, 6, 7, 8, 10, 11 };
- return frq_xs_map[get_FRQ(tCK) - 3];
-}
-
-static u8 get_MOD(u32 tCK)
-{
- /* Get MOD based on MCU frequency using the following rule:
- * _____________________________
- * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
- * MOD : | 12 | 12 | 12 | 12 | 15 | 16 |
- */
- static const u8 frq_mod_map[] = { 12, 12, 12, 12, 15, 16 };
- return frq_mod_map[get_FRQ(tCK) - 3];
-}
-
-static u8 get_WLO(u32 tCK)
-{
- /* Get WLO based on MCU frequency using the following rule:
- * _______________________
- * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
- * WLO : | 4 | 5 | 6 | 6 | 8 | 8 |
- */
- static const u8 frq_wlo_map[] = { 4, 5, 6, 6, 8, 8 };
- return frq_wlo_map[get_FRQ(tCK) - 3];
-}
-
-static u8 get_CKE(u32 tCK)
-{
- /* Get CKE based on MCU frequency using the following rule:
- * _______________________
- * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
- * CKE : | 3 | 3 | 4 | 4 | 5 | 6 |
- */
- static const u8 frq_cke_map[] = { 3, 3, 4, 4, 5, 6 };
- return frq_cke_map[get_FRQ(tCK) - 3];
-}
-
-static u8 get_XPDLL(u32 tCK)
-{
- /* Get XPDLL based on MCU frequency using the following rule:
- * _____________________________
- * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
- * XPDLL : | 10 | 13 | 16 | 20 | 23 | 26 |
- */
- static const u8 frq_xpdll_map[] = { 10, 13, 16, 20, 23, 26 };
- return frq_xpdll_map[get_FRQ(tCK) - 3];
-}
-
-static u8 get_XP(u32 tCK)
-{
- /* Get XP based on MCU frequency using the following rule:
- * _______________________
- * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
- * XP : | 3 | 4 | 4 | 5 | 6 | 7 |
- */
- static const u8 frq_xp_map[] = { 3, 4, 4, 5, 6, 7 };
- return frq_xp_map[get_FRQ(tCK) - 3];
-}
-
-static u8 get_AONPD(u32 tCK)
-{
- /* Get AONPD based on MCU frequency using the following rule:
- * ________________________
- * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
- * AONPD : | 4 | 5 | 6 | 8 | 8 | 10 |
- */
- static const u8 frq_aonpd_map[] = { 4, 5, 6, 8, 8, 10 };
- return frq_aonpd_map[get_FRQ(tCK) - 3];
-}
-
-static u32 get_COMP2(u32 tCK)
-{
- /* Get COMP2 based on MCU frequency using the following rule:
- * ___________________________________________________________
- * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
- * COMP : | D6BEDCC | CE7C34C | CA57A4C | C6369CC | C42514C | C21410C |
- */
- static const u32 frq_comp2_map[] = { 0xD6BEDCC, 0xCE7C34C, 0xCA57A4C,
- 0xC6369CC, 0xC42514C, 0xC21410C
- };
- return frq_comp2_map[get_FRQ(tCK) - 3];
-}
-
-static void dram_timing(ramctr_timing * ctrl)
-{
- u8 val;
- u32 val32;
-
- /* Maximum supported DDR3 frequency is 1066MHz (DDR3 2133) so make sure
- * we cap it if we have faster DIMMs.
- * Then, align it to the closest JEDEC standard frequency */
- if (ctrl->tCK <= TCK_1066MHZ) {
- ctrl->tCK = TCK_1066MHZ;
- ctrl->edge_offset[0] = 16;
- ctrl->edge_offset[1] = 7;
- ctrl->edge_offset[2] = 7;
- ctrl->timC_offset[0] = 18;
- ctrl->timC_offset[1] = 7;
- ctrl->timC_offset[2] = 7;
- ctrl->reg_320c_range_threshold = 13;
- } else if (ctrl->tCK <= TCK_933MHZ) {
- ctrl->tCK = TCK_933MHZ;
- ctrl->edge_offset[0] = 14;
- ctrl->edge_offset[1] = 6;
- ctrl->edge_offset[2] = 6;
- ctrl->timC_offset[0] = 15;
- ctrl->timC_offset[1] = 6;
- ctrl->timC_offset[2] = 6;
- ctrl->reg_320c_range_threshold = 15;
- } else if (ctrl->tCK <= TCK_800MHZ) {
- ctrl->tCK = TCK_800MHZ;
- ctrl->edge_offset[0] = 13;
- ctrl->edge_offset[1] = 5;
- ctrl->edge_offset[2] = 5;
- ctrl->timC_offset[0] = 14;
- ctrl->timC_offset[1] = 5;
- ctrl->timC_offset[2] = 5;
- ctrl->reg_320c_range_threshold = 15;
- } else if (ctrl->tCK <= TCK_666MHZ) {
- ctrl->tCK = TCK_666MHZ;
- ctrl->edge_offset[0] = 10;
- ctrl->edge_offset[1] = 4;
- ctrl->edge_offset[2] = 4;
- ctrl->timC_offset[0] = 11;
- ctrl->timC_offset[1] = 4;
- ctrl->timC_offset[2] = 4;
- ctrl->reg_320c_range_threshold = 16;
- } else if (ctrl->tCK <= TCK_533MHZ) {
- ctrl->tCK = TCK_533MHZ;
- ctrl->edge_offset[0] = 8;
- ctrl->edge_offset[1] = 3;
- ctrl->edge_offset[2] = 3;
- ctrl->timC_offset[0] = 9;
- ctrl->timC_offset[1] = 3;
- ctrl->timC_offset[2] = 3;
- ctrl->reg_320c_range_threshold = 17;
- } else {
- ctrl->tCK = TCK_400MHZ;
- ctrl->edge_offset[0] = 6;
- ctrl->edge_offset[1] = 2;
- ctrl->edge_offset[2] = 2;
- ctrl->timC_offset[0] = 6;
- ctrl->timC_offset[1] = 2;
- ctrl->timC_offset[2] = 2;
- ctrl->reg_320c_range_threshold = 17;
- }
-
- /* Initial phase between CLK/CMD pins */
- ctrl->reg_c14_offset = (256000 / ctrl->tCK) / 66;
-
- /* DLL_CONFIG_MDLL_W_TIMER */
- ctrl->reg_5064b0 = (128000 / ctrl->tCK) + 3;
-
- val32 = (1000 << 8) / ctrl->tCK;
- printk(BIOS_DEBUG, "Selected DRAM frequency: %u MHz\n", val32);
-
- /* Find CAS latency */
- val = (ctrl->tAA + ctrl->tCK - 1) / ctrl->tCK;
- printk(BIOS_DEBUG, "Minimum CAS latency : %uT\n", val);
- /* Find lowest supported CAS latency that satisfies the minimum value */
- while (!((ctrl->cas_supported >> (val - MIN_CAS)) & 1)
- && (ctrl->cas_supported >> (val - MIN_CAS))) {
- val++;
- }
- /* Is CAS supported */
- if (!(ctrl->cas_supported & (1 << (val - MIN_CAS)))) {
- printk(BIOS_ERR, "CAS %uT not supported. ", val);
- val = MAX_CAS;
- /* Find highest supported CAS latency */
- while (!((ctrl->cas_supported >> (val - MIN_CAS)) & 1))
- val--;
-
- printk(BIOS_ERR, "Using CAS %uT instead.\n", val);
- }
-
- printk(BIOS_DEBUG, "Selected CAS latency : %uT\n", val);
- ctrl->CAS = val;
- ctrl->CWL = get_CWL(ctrl->tCK);
- printk(BIOS_DEBUG, "Selected CWL latency : %uT\n", ctrl->CWL);
-
- /* Find tRCD */
- ctrl->tRCD = (ctrl->tRCD + ctrl->tCK - 1) / ctrl->tCK;
- printk(BIOS_DEBUG, "Selected tRCD : %uT\n", ctrl->tRCD);
-
- ctrl->tRP = (ctrl->tRP + ctrl->tCK - 1) / ctrl->tCK;
- printk(BIOS_DEBUG, "Selected tRP : %uT\n", ctrl->tRP);
-
- /* Find tRAS */
- ctrl->tRAS = (ctrl->tRAS + ctrl->tCK - 1) / ctrl->tCK;
- printk(BIOS_DEBUG, "Selected tRAS : %uT\n", ctrl->tRAS);
-
- /* Find tWR */
- ctrl->tWR = (ctrl->tWR + ctrl->tCK - 1) / ctrl->tCK;
- printk(BIOS_DEBUG, "Selected tWR : %uT\n", ctrl->tWR);
-
- /* Find tFAW */
- ctrl->tFAW = (ctrl->tFAW + ctrl->tCK - 1) / ctrl->tCK;
- printk(BIOS_DEBUG, "Selected tFAW : %uT\n", ctrl->tFAW);
-
- /* Find tRRD */
- ctrl->tRRD = (ctrl->tRRD + ctrl->tCK - 1) / ctrl->tCK;
- printk(BIOS_DEBUG, "Selected tRRD : %uT\n", ctrl->tRRD);
-
- /* Find tRTP */
- ctrl->tRTP = (ctrl->tRTP + ctrl->tCK - 1) / ctrl->tCK;
- printk(BIOS_DEBUG, "Selected tRTP : %uT\n", ctrl->tRTP);
-
- /* Find tWTR */
- ctrl->tWTR = (ctrl->tWTR + ctrl->tCK - 1) / ctrl->tCK;
- printk(BIOS_DEBUG, "Selected tWTR : %uT\n", ctrl->tWTR);
-
- /* Refresh-to-Active or Refresh-to-Refresh (tRFC) */
- ctrl->tRFC = (ctrl->tRFC + ctrl->tCK - 1) / ctrl->tCK;
- printk(BIOS_DEBUG, "Selected tRFC : %uT\n", ctrl->tRFC);
-
- ctrl->tREFI = get_REFI(ctrl->tCK);
- ctrl->tMOD = get_MOD(ctrl->tCK);
- ctrl->tXSOffset = get_XSOffset(ctrl->tCK);
- ctrl->tWLO = get_WLO(ctrl->tCK);
- ctrl->tCKE = get_CKE(ctrl->tCK);
- ctrl->tXPDLL = get_XPDLL(ctrl->tCK);
- ctrl->tXP = get_XP(ctrl->tCK);
- ctrl->tAONPD = get_AONPD(ctrl->tCK);
-}
-
-static void dram_freq(ramctr_timing * ctrl)
-{
- if (ctrl->tCK > TCK_400MHZ) {
- printk (BIOS_ERR, "DRAM frequency is under lowest supported frequency (400 MHz). Increasing to 400 MHz as last resort");
- ctrl->tCK = TCK_400MHZ;
- }
- while (1) {
- u8 val2;
- u32 reg1 = 0;
-
- /* Step 1 - Set target PCU frequency */
-
- if (ctrl->tCK <= TCK_1066MHZ) {
- ctrl->tCK = TCK_1066MHZ;
- } else if (ctrl->tCK <= TCK_933MHZ) {
- ctrl->tCK = TCK_933MHZ;
- } else if (ctrl->tCK <= TCK_800MHZ) {
- ctrl->tCK = TCK_800MHZ;
- } else if (ctrl->tCK <= TCK_666MHZ) {
- ctrl->tCK = TCK_666MHZ;
- } else if (ctrl->tCK <= TCK_533MHZ) {
- ctrl->tCK = TCK_533MHZ;
- } else if (ctrl->tCK <= TCK_400MHZ) {
- ctrl->tCK = TCK_400MHZ;
- } else {
- die ("No lock frequency found");
- }
-
- /* Frequency multiplier. */
- u32 FRQ = get_FRQ(ctrl->tCK);
-
- /* The PLL will never lock if the required frequency is
- * already set. Exit early to prevent a system hang.
- */
- reg1 = MCHBAR32(MC_BIOS_DATA);
- val2 = (u8) reg1;
- if (val2)
- return;
-
- /* Step 2 - Select frequency in the MCU */
- reg1 = FRQ;
- reg1 |= 0x80000000; // set running bit
- MCHBAR32(MC_BIOS_REQ) = reg1;
- int i=0;
- printk(BIOS_DEBUG, "PLL busy... ");
- while (reg1 & 0x80000000) {
- udelay(10);
- i++;
- reg1 = MCHBAR32(MC_BIOS_REQ);
- }
- printk(BIOS_DEBUG, "done in %d us\n", i * 10);
-
- /* Step 3 - Verify lock frequency */
- reg1 = MCHBAR32(MC_BIOS_DATA);
- val2 = (u8) reg1;
- if (val2 >= FRQ) {
- printk(BIOS_DEBUG, "MCU frequency is set at : %d MHz\n",
- (1000 << 8) / ctrl->tCK);
- return;
- }
- printk(BIOS_DEBUG, "PLL didn't lock. Retrying at lower frequency\n");
- ctrl->tCK++;
- }
-}
-
-static void dram_ioregs(ramctr_timing * ctrl)
-{
- u32 reg, comp2;
-
- int channel;
-
- // IO clock
- FOR_ALL_CHANNELS {
- MCHBAR32(0xc00 + 0x100 * channel) = ctrl->rankmap[channel];
- }
-
- // IO command
- FOR_ALL_CHANNELS {
- MCHBAR32(0x3200 + 0x100 * channel) = ctrl->rankmap[channel];
- }
-
- // IO control
- FOR_ALL_POPULATED_CHANNELS {
- program_timings(ctrl, channel);
- }
-
- // Rcomp
- printram("RCOMP...");
- reg = 0;
- while (reg == 0) {
- reg = MCHBAR32(0x5084) & 0x10000;
- }
- printram("done\n");
-
- // Set comp2
- comp2 = get_COMP2(ctrl->tCK);
- MCHBAR32(0x3714) = comp2;
- printram("COMP2 done\n");
-
- // Set comp1
- FOR_ALL_POPULATED_CHANNELS {
- reg = MCHBAR32(0x1810 + channel * 0x100); //ch0
- reg = (reg & ~0xe00) | (1 << 9); //odt
- reg = (reg & ~0xe00000) | (1 << 21); //clk drive up
- reg = (reg & ~0x38000000) | (1 << 27); //ctl drive up
- MCHBAR32(0x1810 + channel * 0x100) = reg;
- }
- printram("COMP1 done\n");
-
- printram("FORCE RCOMP and wait 20us...");
- MCHBAR32(0x5f08) |= 0x100;
- udelay(20);
- printram("done\n");
-}
-
static void save_timings(ramctr_timing *ctrl)
{
/* Save the MRC S3 restore data to cbmem */
@@ -657,121 +286,10 @@ static void save_timings(ramctr_timing *ctrl)
static int try_init_dram_ddr3(ramctr_timing *ctrl, int fast_boot,
int s3_resume, int me_uma_size)
{
- int err;
-
- printk(BIOS_DEBUG, "Starting RAM training (%d).\n", fast_boot);
-
- if (!fast_boot) {
- /* Find fastest common supported parameters */
- dram_find_common_params(ctrl);
-
- dram_dimm_mapping(ctrl);
- }
-
- /* Set MCU frequency */
- dram_freq(ctrl);
-
- if (!fast_boot) {
- /* Calculate timings */
- dram_timing(ctrl);
- }
-
- /* Set version register */
- MCHBAR32(0x5034) = 0xC04EB002;
-
- /* Enable crossover */
- dram_xover(ctrl);
-
- /* Set timing and refresh registers */
- dram_timing_regs(ctrl);
-
- /* Power mode preset */
- MCHBAR32(0x4e80) = 0x5500;
-
- /* Set scheduler parameters */
- MCHBAR32(0x4c20) = 0x10100005;
-
- /* Set CPU specific register */
- set_4f8c();
-
- /* Clear IO reset bit */
- MCHBAR32(0x5030) &= ~0x20;
-
- /* Set MAD-DIMM registers */
- dram_dimm_set_mapping(ctrl);
- printk(BIOS_DEBUG, "Done dimm mapping\n");
-
- /* Zone config */
- dram_zones(ctrl, 1);
-
- /* Set memory map */
- dram_memorymap(ctrl, me_uma_size);
- printk(BIOS_DEBUG, "Done memory map\n");
-
- /* Set IO registers */
- dram_ioregs(ctrl);
- printk(BIOS_DEBUG, "Done io registers\n");
-
- udelay(1);
-
- if (fast_boot) {
- restore_timings(ctrl);
- } else {
- /* Do jedec ddr3 reset sequence */
- dram_jedecreset(ctrl);
- printk(BIOS_DEBUG, "Done jedec reset\n");
-
- /* MRS commands */
- dram_mrscommands(ctrl);
- printk(BIOS_DEBUG, "Done MRS commands\n");
-
- /* Prepare for memory training */
- prepare_training(ctrl);
-
- err = read_training(ctrl);
- if (err)
- return err;
-
- err = write_training(ctrl);
- if (err)
- return err;
-
- printram("CP5a\n");
-
- err = discover_edges(ctrl);
- if (err)
- return err;
-
- printram("CP5b\n");
-
- err = command_training(ctrl);
- if (err)
- return err;
-
- printram("CP5c\n");
-
- err = discover_edges_write(ctrl);
- if (err)
- return err;
-
- err = discover_timC_write(ctrl);
- if (err)
- return err;
-
- normalize_training(ctrl);
- }
-
- set_4008c(ctrl);
-
- write_controller_mr(ctrl);
-
- if (!s3_resume) {
- err = channel_test(ctrl);
- if (err)
- return err;
- }
-
- return 0;
+ if (ctrl->sandybridge)
+ return try_init_dram_ddr3_sandy(ctrl, fast_boot, s3_resume, me_uma_size);
+ else
+ return try_init_dram_ddr3_ivy(ctrl, fast_boot, s3_resume, me_uma_size);
}
static void init_dram_ddr3(int mobile, int min_tck, int s3resume)
@@ -783,7 +301,9 @@ static void init_dram_ddr3(int mobile, int min_tck, int s3resume)
spd_raw_data spds[4];
struct mrc_data_container *mrc_cache;
ramctr_timing *ctrl_cached;
+ struct cpuid_result cpures;
int err;
+ u32 cpu;
MCHBAR32(0x5f00) |= 1;
@@ -864,6 +384,11 @@ static void init_dram_ddr3(int mobile, int min_tck, int s3resume)
ctrl.mobile = mobile;
ctrl.tCK = min_tck;
+ /* Get architecture */
+ cpures = cpuid(1);
+ cpu = cpures.eax;
+ ctrl.sandybridge = IS_SANDY_CPU(cpu);
+
/* Get DDR3 SPD data */
memset(spds, 0, sizeof(spds));
mainboard_get_spd(spds, 0);
@@ -882,6 +407,11 @@ static void init_dram_ddr3(int mobile, int min_tck, int s3resume)
ctrl.mobile = mobile;
ctrl.tCK = min_tck;
+ /* Get architecture */
+ cpures = cpuid(1);
+ cpu = cpures.eax;
+ ctrl.sandybridge = IS_SANDY_CPU(cpu);
+
/* Reset DDR3 frequency */
dram_find_spds_ddr3(spds, &ctrl);
diff --git a/src/northbridge/intel/sandybridge/raminit_common.h b/src/northbridge/intel/sandybridge/raminit_common.h
index 4655ed5f80..7aec7354b1 100644
--- a/src/northbridge/intel/sandybridge/raminit_common.h
+++ b/src/northbridge/intel/sandybridge/raminit_common.h
@@ -76,6 +76,7 @@ struct ramctr_timing_st;
typedef struct ramctr_timing_st {
u16 spd_crc[NUM_CHANNELS][NUM_SLOTS];
int mobile;
+ int sandybridge;
u16 cas_supported;
/* tLatencies are in units of ns, scaled by x256 */
@@ -176,5 +177,10 @@ void set_42a0(ramctr_timing * ctrl);
void final_registers(ramctr_timing * ctrl);
void restore_timings(ramctr_timing * ctrl);
-#endif
+int try_init_dram_ddr3_sandy(ramctr_timing *ctrl, int fast_boot,
+ int s3_resume, int me_uma_size);
+
+int try_init_dram_ddr3_ivy(ramctr_timing *ctrl, int fast_boot,
+ int s3_resume, int me_uma_size);
+#endif
diff --git a/src/northbridge/intel/sandybridge/raminit_ivy.c b/src/northbridge/intel/sandybridge/raminit_ivy.c
new file mode 100644
index 0000000000..9349cf772f
--- /dev/null
+++ b/src/northbridge/intel/sandybridge/raminit_ivy.c
@@ -0,0 +1,514 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Damien Zammit <damien@zamaudio.com>
+ * Copyright (C) 2014 Vladimir Serbinenko <phcoder@gmail.com>
+ * Copyright (C) 2016 Patrick Rudolph <siro@das-labor.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <console/usb.h>
+#include <cpu/x86/msr.h>
+#include <delay.h>
+#include "raminit_native.h"
+#include "raminit_common.h"
+
+/* Frequency multiplier. */
+static u32 get_FRQ(u32 tCK)
+{
+ u32 FRQ;
+ FRQ = 256000 / (tCK * BASEFREQ);
+ if (FRQ > 8)
+ return 8;
+ if (FRQ < 3)
+ return 3;
+ return FRQ;
+}
+
+static u32 get_REFI(u32 tCK)
+{
+ /* Get REFI based on MCU frequency using the following rule:
+ * _________________________________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * REFI: | 3120 | 4160 | 5200 | 6240 | 7280 | 8320 |
+ */
+ static const u32 frq_refi_map[] =
+ { 3120, 4160, 5200, 6240, 7280, 8320 };
+ return frq_refi_map[get_FRQ(tCK) - 3];
+}
+
+static u8 get_XSOffset(u32 tCK)
+{
+ /* Get XSOffset based on MCU frequency using the following rule:
+ * _________________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * XSOffset : | 4 | 6 | 7 | 8 | 10 | 11 |
+ */
+ static const u8 frq_xs_map[] = { 4, 6, 7, 8, 10, 11 };
+ return frq_xs_map[get_FRQ(tCK) - 3];
+}
+
+static u8 get_MOD(u32 tCK)
+{
+ /* Get MOD based on MCU frequency using the following rule:
+ * _____________________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * MOD : | 12 | 12 | 12 | 12 | 15 | 16 |
+ */
+ static const u8 frq_mod_map[] = { 12, 12, 12, 12, 15, 16 };
+ return frq_mod_map[get_FRQ(tCK) - 3];
+}
+
+static u8 get_WLO(u32 tCK)
+{
+ /* Get WLO based on MCU frequency using the following rule:
+ * _______________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * WLO : | 4 | 5 | 6 | 6 | 8 | 8 |
+ */
+ static const u8 frq_wlo_map[] = { 4, 5, 6, 6, 8, 8 };
+ return frq_wlo_map[get_FRQ(tCK) - 3];
+}
+
+static u8 get_CKE(u32 tCK)
+{
+ /* Get CKE based on MCU frequency using the following rule:
+ * _______________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * CKE : | 3 | 3 | 4 | 4 | 5 | 6 |
+ */
+ static const u8 frq_cke_map[] = { 3, 3, 4, 4, 5, 6 };
+ return frq_cke_map[get_FRQ(tCK) - 3];
+}
+
+static u8 get_XPDLL(u32 tCK)
+{
+ /* Get XPDLL based on MCU frequency using the following rule:
+ * _____________________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * XPDLL : | 10 | 13 | 16 | 20 | 23 | 26 |
+ */
+ static const u8 frq_xpdll_map[] = { 10, 13, 16, 20, 23, 26 };
+ return frq_xpdll_map[get_FRQ(tCK) - 3];
+}
+
+static u8 get_XP(u32 tCK)
+{
+ /* Get XP based on MCU frequency using the following rule:
+ * _______________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * XP : | 3 | 4 | 4 | 5 | 6 | 7 |
+ */
+ static const u8 frq_xp_map[] = { 3, 4, 4, 5, 6, 7 };
+ return frq_xp_map[get_FRQ(tCK) - 3];
+}
+
+static u8 get_AONPD(u32 tCK)
+{
+ /* Get AONPD based on MCU frequency using the following rule:
+ * ________________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * AONPD : | 4 | 5 | 6 | 8 | 8 | 10 |
+ */
+ static const u8 frq_aonpd_map[] = { 4, 5, 6, 8, 8, 10 };
+ return frq_aonpd_map[get_FRQ(tCK) - 3];
+}
+
+static u32 get_COMP2(u32 tCK)
+{
+ /* Get COMP2 based on MCU frequency using the following rule:
+ * ___________________________________________________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * COMP : | D6BEDCC | CE7C34C | CA57A4C | C6369CC | C42514C | C21410C |
+ */
+ static const u32 frq_comp2_map[] = { 0xD6BEDCC, 0xCE7C34C, 0xCA57A4C,
+ 0xC6369CC, 0xC42514C, 0xC21410C
+ };
+ return frq_comp2_map[get_FRQ(tCK) - 3];
+}
+
+static void dram_timing(ramctr_timing * ctrl)
+{
+ u8 val;
+ u32 val32;
+
+ /* Maximum supported DDR3 frequency is 1066MHz (DDR3 2133) so make sure
+ * we cap it if we have faster DIMMs.
+ * Then, align it to the closest JEDEC standard frequency */
+ if (ctrl->tCK <= TCK_1066MHZ) {
+ ctrl->tCK = TCK_1066MHZ;
+ ctrl->edge_offset[0] = 16;
+ ctrl->edge_offset[1] = 7;
+ ctrl->edge_offset[2] = 7;
+ ctrl->timC_offset[0] = 18;
+ ctrl->timC_offset[1] = 7;
+ ctrl->timC_offset[2] = 7;
+ ctrl->reg_320c_range_threshold = 13;
+ } else if (ctrl->tCK <= TCK_933MHZ) {
+ ctrl->tCK = TCK_933MHZ;
+ ctrl->edge_offset[0] = 14;
+ ctrl->edge_offset[1] = 6;
+ ctrl->edge_offset[2] = 6;
+ ctrl->timC_offset[0] = 15;
+ ctrl->timC_offset[1] = 6;
+ ctrl->timC_offset[2] = 6;
+ ctrl->reg_320c_range_threshold = 15;
+ } else if (ctrl->tCK <= TCK_800MHZ) {
+ ctrl->tCK = TCK_800MHZ;
+ ctrl->edge_offset[0] = 13;
+ ctrl->edge_offset[1] = 5;
+ ctrl->edge_offset[2] = 5;
+ ctrl->timC_offset[0] = 14;
+ ctrl->timC_offset[1] = 5;
+ ctrl->timC_offset[2] = 5;
+ ctrl->reg_320c_range_threshold = 15;
+ } else if (ctrl->tCK <= TCK_666MHZ) {
+ ctrl->tCK = TCK_666MHZ;
+ ctrl->edge_offset[0] = 10;
+ ctrl->edge_offset[1] = 4;
+ ctrl->edge_offset[2] = 4;
+ ctrl->timC_offset[0] = 11;
+ ctrl->timC_offset[1] = 4;
+ ctrl->timC_offset[2] = 4;
+ ctrl->reg_320c_range_threshold = 16;
+ } else if (ctrl->tCK <= TCK_533MHZ) {
+ ctrl->tCK = TCK_533MHZ;
+ ctrl->edge_offset[0] = 8;
+ ctrl->edge_offset[1] = 3;
+ ctrl->edge_offset[2] = 3;
+ ctrl->timC_offset[0] = 9;
+ ctrl->timC_offset[1] = 3;
+ ctrl->timC_offset[2] = 3;
+ ctrl->reg_320c_range_threshold = 17;
+ } else {
+ ctrl->tCK = TCK_400MHZ;
+ ctrl->edge_offset[0] = 6;
+ ctrl->edge_offset[1] = 2;
+ ctrl->edge_offset[2] = 2;
+ ctrl->timC_offset[0] = 6;
+ ctrl->timC_offset[1] = 2;
+ ctrl->timC_offset[2] = 2;
+ ctrl->reg_320c_range_threshold = 17;
+ }
+
+ /* Initial phase between CLK/CMD pins */
+ ctrl->reg_c14_offset = (256000 / ctrl->tCK) / 66;
+
+ /* DLL_CONFIG_MDLL_W_TIMER */
+ ctrl->reg_5064b0 = (128000 / ctrl->tCK) + 3;
+
+ val32 = (1000 << 8) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected DRAM frequency: %u MHz\n", val32);
+
+ /* Find CAS latency */
+ val = (ctrl->tAA + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Minimum CAS latency : %uT\n", val);
+ /* Find lowest supported CAS latency that satisfies the minimum value */
+ while (!((ctrl->cas_supported >> (val - MIN_CAS)) & 1)
+ && (ctrl->cas_supported >> (val - MIN_CAS))) {
+ val++;
+ }
+ /* Is CAS supported */
+ if (!(ctrl->cas_supported & (1 << (val - MIN_CAS)))) {
+ printk(BIOS_ERR, "CAS %uT not supported. ", val);
+ val = MAX_CAS;
+ /* Find highest supported CAS latency */
+ while (!((ctrl->cas_supported >> (val - MIN_CAS)) & 1))
+ val--;
+
+ printk(BIOS_ERR, "Using CAS %uT instead.\n", val);
+ }
+
+ printk(BIOS_DEBUG, "Selected CAS latency : %uT\n", val);
+ ctrl->CAS = val;
+ ctrl->CWL = get_CWL(ctrl->tCK);
+ printk(BIOS_DEBUG, "Selected CWL latency : %uT\n", ctrl->CWL);
+
+ /* Find tRCD */
+ ctrl->tRCD = (ctrl->tRCD + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tRCD : %uT\n", ctrl->tRCD);
+
+ ctrl->tRP = (ctrl->tRP + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tRP : %uT\n", ctrl->tRP);
+
+ /* Find tRAS */
+ ctrl->tRAS = (ctrl->tRAS + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tRAS : %uT\n", ctrl->tRAS);
+
+ /* Find tWR */
+ ctrl->tWR = (ctrl->tWR + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tWR : %uT\n", ctrl->tWR);
+
+ /* Find tFAW */
+ ctrl->tFAW = (ctrl->tFAW + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tFAW : %uT\n", ctrl->tFAW);
+
+ /* Find tRRD */
+ ctrl->tRRD = (ctrl->tRRD + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tRRD : %uT\n", ctrl->tRRD);
+
+ /* Find tRTP */
+ ctrl->tRTP = (ctrl->tRTP + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tRTP : %uT\n", ctrl->tRTP);
+
+ /* Find tWTR */
+ ctrl->tWTR = (ctrl->tWTR + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tWTR : %uT\n", ctrl->tWTR);
+
+ /* Refresh-to-Active or Refresh-to-Refresh (tRFC) */
+ ctrl->tRFC = (ctrl->tRFC + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tRFC : %uT\n", ctrl->tRFC);
+
+ ctrl->tREFI = get_REFI(ctrl->tCK);
+ ctrl->tMOD = get_MOD(ctrl->tCK);
+ ctrl->tXSOffset = get_XSOffset(ctrl->tCK);
+ ctrl->tWLO = get_WLO(ctrl->tCK);
+ ctrl->tCKE = get_CKE(ctrl->tCK);
+ ctrl->tXPDLL = get_XPDLL(ctrl->tCK);
+ ctrl->tXP = get_XP(ctrl->tCK);
+ ctrl->tAONPD = get_AONPD(ctrl->tCK);
+}
+
+static void dram_freq(ramctr_timing * ctrl)
+{
+ if (ctrl->tCK > TCK_400MHZ) {
+ printk (BIOS_ERR, "DRAM frequency is under lowest supported frequency (400 MHz). Increasing to 400 MHz as last resort");
+ ctrl->tCK = TCK_400MHZ;
+ }
+ while (1) {
+ u8 val2;
+ u32 reg1 = 0;
+
+ /* Step 1 - Set target PCU frequency */
+
+ if (ctrl->tCK <= TCK_1066MHZ) {
+ ctrl->tCK = TCK_1066MHZ;
+ } else if (ctrl->tCK <= TCK_933MHZ) {
+ ctrl->tCK = TCK_933MHZ;
+ } else if (ctrl->tCK <= TCK_800MHZ) {
+ ctrl->tCK = TCK_800MHZ;
+ } else if (ctrl->tCK <= TCK_666MHZ) {
+ ctrl->tCK = TCK_666MHZ;
+ } else if (ctrl->tCK <= TCK_533MHZ) {
+ ctrl->tCK = TCK_533MHZ;
+ } else if (ctrl->tCK <= TCK_400MHZ) {
+ ctrl->tCK = TCK_400MHZ;
+ } else {
+ die ("No lock frequency found");
+ }
+
+ /* Frequency multiplier. */
+ u32 FRQ = get_FRQ(ctrl->tCK);
+
+ /* The PLL will never lock if the required frequency is
+ * already set. Exit early to prevent a system hang.
+ */
+ reg1 = MCHBAR32(MC_BIOS_DATA);
+ val2 = (u8) reg1;
+ if (val2)
+ return;
+
+ /* Step 2 - Select frequency in the MCU */
+ reg1 = FRQ;
+ reg1 |= 0x80000000; // set running bit
+ MCHBAR32(MC_BIOS_REQ) = reg1;
+ int i=0;
+ printk(BIOS_DEBUG, "PLL busy... ");
+ while (reg1 & 0x80000000) {
+ udelay(10);
+ i++;
+ reg1 = MCHBAR32(MC_BIOS_REQ);
+ }
+ printk(BIOS_DEBUG, "done in %d us\n", i * 10);
+
+ /* Step 3 - Verify lock frequency */
+ reg1 = MCHBAR32(MC_BIOS_DATA);
+ val2 = (u8) reg1;
+ if (val2 >= FRQ) {
+ printk(BIOS_DEBUG, "MCU frequency is set at : %d MHz\n",
+ (1000 << 8) / ctrl->tCK);
+ return;
+ }
+ printk(BIOS_DEBUG, "PLL didn't lock. Retrying at lower frequency\n");
+ ctrl->tCK++;
+ }
+}
+
+static void dram_ioregs(ramctr_timing * ctrl)
+{
+ u32 reg, comp2;
+
+ int channel;
+
+ // IO clock
+ FOR_ALL_CHANNELS {
+ MCHBAR32(0xc00 + 0x100 * channel) = ctrl->rankmap[channel];
+ }
+
+ // IO command
+ FOR_ALL_CHANNELS {
+ MCHBAR32(0x3200 + 0x100 * channel) = ctrl->rankmap[channel];
+ }
+
+ // IO control
+ FOR_ALL_POPULATED_CHANNELS {
+ program_timings(ctrl, channel);
+ }
+
+ // Rcomp
+ printram("RCOMP...");
+ reg = 0;
+ while (reg == 0) {
+ reg = MCHBAR32(0x5084) & 0x10000;
+ }
+ printram("done\n");
+
+ // Set comp2
+ comp2 = get_COMP2(ctrl->tCK);
+ MCHBAR32(0x3714) = comp2;
+ printram("COMP2 done\n");
+
+ // Set comp1
+ FOR_ALL_POPULATED_CHANNELS {
+ reg = MCHBAR32(0x1810 + channel * 0x100); //ch0
+ reg = (reg & ~0xe00) | (1 << 9); //odt
+ reg = (reg & ~0xe00000) | (1 << 21); //clk drive up
+ reg = (reg & ~0x38000000) | (1 << 27); //ctl drive up
+ MCHBAR32(0x1810 + channel * 0x100) = reg;
+ }
+ printram("COMP1 done\n");
+
+ printram("FORCE RCOMP and wait 20us...");
+ MCHBAR32(0x5f08) |= 0x100;
+ udelay(20);
+ printram("done\n");
+}
+
+int try_init_dram_ddr3_ivy(ramctr_timing *ctrl, int fast_boot,
+ int s3_resume, int me_uma_size)
+{
+ int err;
+
+ printk(BIOS_DEBUG, "Starting RAM training (%d).\n", fast_boot);
+
+ if (!fast_boot) {
+ /* Find fastest common supported parameters */
+ dram_find_common_params(ctrl);
+
+ dram_dimm_mapping(ctrl);
+ }
+
+ /* Set MCU frequency */
+ dram_freq(ctrl);
+
+ if (!fast_boot) {
+ /* Calculate timings */
+ dram_timing(ctrl);
+ }
+
+ /* Set version register */
+ MCHBAR32(0x5034) = 0xC04EB002;
+
+ /* Enable crossover */
+ dram_xover(ctrl);
+
+ /* Set timing and refresh registers */
+ dram_timing_regs(ctrl);
+
+ /* Power mode preset */
+ MCHBAR32(0x4e80) = 0x5500;
+
+ /* Set scheduler parameters */
+ MCHBAR32(0x4c20) = 0x10100005;
+
+ /* Set CPU specific register */
+ set_4f8c();
+
+ /* Clear IO reset bit */
+ MCHBAR32(0x5030) &= ~0x20;
+
+ /* Set MAD-DIMM registers */
+ dram_dimm_set_mapping(ctrl);
+ printk(BIOS_DEBUG, "Done dimm mapping\n");
+
+ /* Zone config */
+ dram_zones(ctrl, 1);
+
+ /* Set memory map */
+ dram_memorymap(ctrl, me_uma_size);
+ printk(BIOS_DEBUG, "Done memory map\n");
+
+ /* Set IO registers */
+ dram_ioregs(ctrl);
+ printk(BIOS_DEBUG, "Done io registers\n");
+
+ udelay(1);
+
+ if (fast_boot) {
+ restore_timings(ctrl);
+ } else {
+ /* Do jedec ddr3 reset sequence */
+ dram_jedecreset(ctrl);
+ printk(BIOS_DEBUG, "Done jedec reset\n");
+
+ /* MRS commands */
+ dram_mrscommands(ctrl);
+ printk(BIOS_DEBUG, "Done MRS commands\n");
+
+ /* Prepare for memory training */
+ prepare_training(ctrl);
+
+ err = read_training(ctrl);
+ if (err)
+ return err;
+
+ err = write_training(ctrl);
+ if (err)
+ return err;
+
+ printram("CP5a\n");
+
+ err = discover_edges(ctrl);
+ if (err)
+ return err;
+
+ printram("CP5b\n");
+
+ err = command_training(ctrl);
+ if (err)
+ return err;
+
+ printram("CP5c\n");
+
+ err = discover_edges_write(ctrl);
+ if (err)
+ return err;
+
+ err = discover_timC_write(ctrl);
+ if (err)
+ return err;
+
+ normalize_training(ctrl);
+ }
+
+ set_4008c(ctrl);
+
+ write_controller_mr(ctrl);
+
+ if (!s3_resume) {
+ err = channel_test(ctrl);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
diff --git a/src/northbridge/intel/sandybridge/raminit_sandy.c b/src/northbridge/intel/sandybridge/raminit_sandy.c
new file mode 100644
index 0000000000..a83cb359fb
--- /dev/null
+++ b/src/northbridge/intel/sandybridge/raminit_sandy.c
@@ -0,0 +1,514 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Damien Zammit <damien@zamaudio.com>
+ * Copyright (C) 2014 Vladimir Serbinenko <phcoder@gmail.com>
+ * Copyright (C) 2016 Patrick Rudolph <siro@das-labor.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <console/usb.h>
+#include <cpu/x86/msr.h>
+#include <delay.h>
+#include "raminit_native.h"
+#include "raminit_common.h"
+
+/* Frequency multiplier. */
+static u32 get_FRQ(u32 tCK)
+{
+ u32 FRQ;
+ FRQ = 256000 / (tCK * BASEFREQ);
+ if (FRQ > 8)
+ return 8;
+ if (FRQ < 3)
+ return 3;
+ return FRQ;
+}
+
+static u32 get_REFI(u32 tCK)
+{
+ /* Get REFI based on MCU frequency using the following rule:
+ * _________________________________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * REFI: | 3120 | 4160 | 5200 | 6240 | 7280 | 8320 |
+ */
+ static const u32 frq_refi_map[] =
+ { 3120, 4160, 5200, 6240, 7280, 8320 };
+ return frq_refi_map[get_FRQ(tCK) - 3];
+}
+
+static u8 get_XSOffset(u32 tCK)
+{
+ /* Get XSOffset based on MCU frequency using the following rule:
+ * _________________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * XSOffset : | 4 | 6 | 7 | 8 | 10 | 11 |
+ */
+ static const u8 frq_xs_map[] = { 4, 6, 7, 8, 10, 11 };
+ return frq_xs_map[get_FRQ(tCK) - 3];
+}
+
+static u8 get_MOD(u32 tCK)
+{
+ /* Get MOD based on MCU frequency using the following rule:
+ * _____________________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * MOD : | 12 | 12 | 12 | 12 | 15 | 16 |
+ */
+ static const u8 frq_mod_map[] = { 12, 12, 12, 12, 15, 16 };
+ return frq_mod_map[get_FRQ(tCK) - 3];
+}
+
+static u8 get_WLO(u32 tCK)
+{
+ /* Get WLO based on MCU frequency using the following rule:
+ * _______________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * WLO : | 4 | 5 | 6 | 6 | 8 | 8 |
+ */
+ static const u8 frq_wlo_map[] = { 4, 5, 6, 6, 8, 8 };
+ return frq_wlo_map[get_FRQ(tCK) - 3];
+}
+
+static u8 get_CKE(u32 tCK)
+{
+ /* Get CKE based on MCU frequency using the following rule:
+ * _______________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * CKE : | 3 | 3 | 4 | 4 | 5 | 6 |
+ */
+ static const u8 frq_cke_map[] = { 3, 3, 4, 4, 5, 6 };
+ return frq_cke_map[get_FRQ(tCK) - 3];
+}
+
+static u8 get_XPDLL(u32 tCK)
+{
+ /* Get XPDLL based on MCU frequency using the following rule:
+ * _____________________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * XPDLL : | 10 | 13 | 16 | 20 | 23 | 26 |
+ */
+ static const u8 frq_xpdll_map[] = { 10, 13, 16, 20, 23, 26 };
+ return frq_xpdll_map[get_FRQ(tCK) - 3];
+}
+
+static u8 get_XP(u32 tCK)
+{
+ /* Get XP based on MCU frequency using the following rule:
+ * _______________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * XP : | 3 | 4 | 4 | 5 | 6 | 7 |
+ */
+ static const u8 frq_xp_map[] = { 3, 4, 4, 5, 6, 7 };
+ return frq_xp_map[get_FRQ(tCK) - 3];
+}
+
+static u8 get_AONPD(u32 tCK)
+{
+ /* Get AONPD based on MCU frequency using the following rule:
+ * ________________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * AONPD : | 4 | 5 | 6 | 8 | 8 | 10 |
+ */
+ static const u8 frq_aonpd_map[] = { 4, 5, 6, 8, 8, 10 };
+ return frq_aonpd_map[get_FRQ(tCK) - 3];
+}
+
+static u32 get_COMP2(u32 tCK)
+{
+ /* Get COMP2 based on MCU frequency using the following rule:
+ * ___________________________________________________________
+ * FRQ : | 3 | 4 | 5 | 6 | 7 | 8 |
+ * COMP : | D6BEDCC | CE7C34C | CA57A4C | C6369CC | C42514C | C21410C |
+ */
+ static const u32 frq_comp2_map[] = { 0xD6BEDCC, 0xCE7C34C, 0xCA57A4C,
+ 0xC6369CC, 0xC42514C, 0xC21410C
+ };
+ return frq_comp2_map[get_FRQ(tCK) - 3];
+}
+
+static void dram_timing(ramctr_timing * ctrl)
+{
+ u8 val;
+ u32 val32;
+
+ /* Maximum supported DDR3 frequency is 1066MHz (DDR3 2133) so make sure
+ * we cap it if we have faster DIMMs.
+ * Then, align it to the closest JEDEC standard frequency */
+ if (ctrl->tCK <= TCK_1066MHZ) {
+ ctrl->tCK = TCK_1066MHZ;
+ ctrl->edge_offset[0] = 16;
+ ctrl->edge_offset[1] = 7;
+ ctrl->edge_offset[2] = 7;
+ ctrl->timC_offset[0] = 18;
+ ctrl->timC_offset[1] = 7;
+ ctrl->timC_offset[2] = 7;
+ ctrl->reg_320c_range_threshold = 13;
+ } else if (ctrl->tCK <= TCK_933MHZ) {
+ ctrl->tCK = TCK_933MHZ;
+ ctrl->edge_offset[0] = 14;
+ ctrl->edge_offset[1] = 6;
+ ctrl->edge_offset[2] = 6;
+ ctrl->timC_offset[0] = 15;
+ ctrl->timC_offset[1] = 6;
+ ctrl->timC_offset[2] = 6;
+ ctrl->reg_320c_range_threshold = 15;
+ } else if (ctrl->tCK <= TCK_800MHZ) {
+ ctrl->tCK = TCK_800MHZ;
+ ctrl->edge_offset[0] = 13;
+ ctrl->edge_offset[1] = 5;
+ ctrl->edge_offset[2] = 5;
+ ctrl->timC_offset[0] = 14;
+ ctrl->timC_offset[1] = 5;
+ ctrl->timC_offset[2] = 5;
+ ctrl->reg_320c_range_threshold = 15;
+ } else if (ctrl->tCK <= TCK_666MHZ) {
+ ctrl->tCK = TCK_666MHZ;
+ ctrl->edge_offset[0] = 10;
+ ctrl->edge_offset[1] = 4;
+ ctrl->edge_offset[2] = 4;
+ ctrl->timC_offset[0] = 11;
+ ctrl->timC_offset[1] = 4;
+ ctrl->timC_offset[2] = 4;
+ ctrl->reg_320c_range_threshold = 16;
+ } else if (ctrl->tCK <= TCK_533MHZ) {
+ ctrl->tCK = TCK_533MHZ;
+ ctrl->edge_offset[0] = 8;
+ ctrl->edge_offset[1] = 3;
+ ctrl->edge_offset[2] = 3;
+ ctrl->timC_offset[0] = 9;
+ ctrl->timC_offset[1] = 3;
+ ctrl->timC_offset[2] = 3;
+ ctrl->reg_320c_range_threshold = 17;
+ } else {
+ ctrl->tCK = TCK_400MHZ;
+ ctrl->edge_offset[0] = 6;
+ ctrl->edge_offset[1] = 2;
+ ctrl->edge_offset[2] = 2;
+ ctrl->timC_offset[0] = 6;
+ ctrl->timC_offset[1] = 2;
+ ctrl->timC_offset[2] = 2;
+ ctrl->reg_320c_range_threshold = 17;
+ }
+
+ /* Initial phase between CLK/CMD pins */
+ ctrl->reg_c14_offset = (256000 / ctrl->tCK) / 66;
+
+ /* DLL_CONFIG_MDLL_W_TIMER */
+ ctrl->reg_5064b0 = (128000 / ctrl->tCK) + 3;
+
+ val32 = (1000 << 8) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected DRAM frequency: %u MHz\n", val32);
+
+ /* Find CAS latency */
+ val = (ctrl->tAA + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Minimum CAS latency : %uT\n", val);
+ /* Find lowest supported CAS latency that satisfies the minimum value */
+ while (!((ctrl->cas_supported >> (val - MIN_CAS)) & 1)
+ && (ctrl->cas_supported >> (val - MIN_CAS))) {
+ val++;
+ }
+ /* Is CAS supported */
+ if (!(ctrl->cas_supported & (1 << (val - MIN_CAS)))) {
+ printk(BIOS_ERR, "CAS %uT not supported. ", val);
+ val = MAX_CAS;
+ /* Find highest supported CAS latency */
+ while (!((ctrl->cas_supported >> (val - MIN_CAS)) & 1))
+ val--;
+
+ printk(BIOS_ERR, "Using CAS %uT instead.\n", val);
+ }
+
+ printk(BIOS_DEBUG, "Selected CAS latency : %uT\n", val);
+ ctrl->CAS = val;
+ ctrl->CWL = get_CWL(ctrl->tCK);
+ printk(BIOS_DEBUG, "Selected CWL latency : %uT\n", ctrl->CWL);
+
+ /* Find tRCD */
+ ctrl->tRCD = (ctrl->tRCD + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tRCD : %uT\n", ctrl->tRCD);
+
+ ctrl->tRP = (ctrl->tRP + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tRP : %uT\n", ctrl->tRP);
+
+ /* Find tRAS */
+ ctrl->tRAS = (ctrl->tRAS + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tRAS : %uT\n", ctrl->tRAS);
+
+ /* Find tWR */
+ ctrl->tWR = (ctrl->tWR + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tWR : %uT\n", ctrl->tWR);
+
+ /* Find tFAW */
+ ctrl->tFAW = (ctrl->tFAW + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tFAW : %uT\n", ctrl->tFAW);
+
+ /* Find tRRD */
+ ctrl->tRRD = (ctrl->tRRD + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tRRD : %uT\n", ctrl->tRRD);
+
+ /* Find tRTP */
+ ctrl->tRTP = (ctrl->tRTP + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tRTP : %uT\n", ctrl->tRTP);
+
+ /* Find tWTR */
+ ctrl->tWTR = (ctrl->tWTR + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tWTR : %uT\n", ctrl->tWTR);
+
+ /* Refresh-to-Active or Refresh-to-Refresh (tRFC) */
+ ctrl->tRFC = (ctrl->tRFC + ctrl->tCK - 1) / ctrl->tCK;
+ printk(BIOS_DEBUG, "Selected tRFC : %uT\n", ctrl->tRFC);
+
+ ctrl->tREFI = get_REFI(ctrl->tCK);
+ ctrl->tMOD = get_MOD(ctrl->tCK);
+ ctrl->tXSOffset = get_XSOffset(ctrl->tCK);
+ ctrl->tWLO = get_WLO(ctrl->tCK);
+ ctrl->tCKE = get_CKE(ctrl->tCK);
+ ctrl->tXPDLL = get_XPDLL(ctrl->tCK);
+ ctrl->tXP = get_XP(ctrl->tCK);
+ ctrl->tAONPD = get_AONPD(ctrl->tCK);
+}
+
+static void dram_freq(ramctr_timing * ctrl)
+{
+ if (ctrl->tCK > TCK_400MHZ) {
+ printk (BIOS_ERR, "DRAM frequency is under lowest supported frequency (400 MHz). Increasing to 400 MHz as last resort");
+ ctrl->tCK = TCK_400MHZ;
+ }
+ while (1) {
+ u8 val2;
+ u32 reg1 = 0;
+
+ /* Step 1 - Set target PCU frequency */
+
+ if (ctrl->tCK <= TCK_1066MHZ) {
+ ctrl->tCK = TCK_1066MHZ;
+ } else if (ctrl->tCK <= TCK_933MHZ) {
+ ctrl->tCK = TCK_933MHZ;
+ } else if (ctrl->tCK <= TCK_800MHZ) {
+ ctrl->tCK = TCK_800MHZ;
+ } else if (ctrl->tCK <= TCK_666MHZ) {
+ ctrl->tCK = TCK_666MHZ;
+ } else if (ctrl->tCK <= TCK_533MHZ) {
+ ctrl->tCK = TCK_533MHZ;
+ } else if (ctrl->tCK <= TCK_400MHZ) {
+ ctrl->tCK = TCK_400MHZ;
+ } else {
+ die ("No lock frequency found");
+ }
+
+ /* Frequency multiplier. */
+ u32 FRQ = get_FRQ(ctrl->tCK);
+
+ /* The PLL will never lock if the required frequency is
+ * already set. Exit early to prevent a system hang.
+ */
+ reg1 = MCHBAR32(MC_BIOS_DATA);
+ val2 = (u8) reg1;
+ if (val2)
+ return;
+
+ /* Step 2 - Select frequency in the MCU */
+ reg1 = FRQ;
+ reg1 |= 0x80000000; // set running bit
+ MCHBAR32(MC_BIOS_REQ) = reg1;
+ int i=0;
+ printk(BIOS_DEBUG, "PLL busy... ");
+ while (reg1 & 0x80000000) {
+ udelay(10);
+ i++;
+ reg1 = MCHBAR32(MC_BIOS_REQ);
+ }
+ printk(BIOS_DEBUG, "done in %d us\n", i * 10);
+
+ /* Step 3 - Verify lock frequency */
+ reg1 = MCHBAR32(MC_BIOS_DATA);
+ val2 = (u8) reg1;
+ if (val2 >= FRQ) {
+ printk(BIOS_DEBUG, "MCU frequency is set at : %d MHz\n",
+ (1000 << 8) / ctrl->tCK);
+ return;
+ }
+ printk(BIOS_DEBUG, "PLL didn't lock. Retrying at lower frequency\n");
+ ctrl->tCK++;
+ }
+}
+
+static void dram_ioregs(ramctr_timing * ctrl)
+{
+ u32 reg, comp2;
+
+ int channel;
+
+ // IO clock
+ FOR_ALL_CHANNELS {
+ MCHBAR32(0xc00 + 0x100 * channel) = ctrl->rankmap[channel];
+ }
+
+ // IO command
+ FOR_ALL_CHANNELS {
+ MCHBAR32(0x3200 + 0x100 * channel) = ctrl->rankmap[channel];
+ }
+
+ // IO control
+ FOR_ALL_POPULATED_CHANNELS {
+ program_timings(ctrl, channel);
+ }
+
+ // Rcomp
+ printram("RCOMP...");
+ reg = 0;
+ while (reg == 0) {
+ reg = MCHBAR32(0x5084) & 0x10000;
+ }
+ printram("done\n");
+
+ // Set comp2
+ comp2 = get_COMP2(ctrl->tCK);
+ MCHBAR32(0x3714) = comp2;
+ printram("COMP2 done\n");
+
+ // Set comp1
+ FOR_ALL_POPULATED_CHANNELS {
+ reg = MCHBAR32(0x1810 + channel * 0x100); //ch0
+ reg = (reg & ~0xe00) | (1 << 9); //odt
+ reg = (reg & ~0xe00000) | (1 << 21); //clk drive up
+ reg = (reg & ~0x38000000) | (1 << 27); //ctl drive up
+ MCHBAR32(0x1810 + channel * 0x100) = reg;
+ }
+ printram("COMP1 done\n");
+
+ printram("FORCE RCOMP and wait 20us...");
+ MCHBAR32(0x5f08) |= 0x100;
+ udelay(20);
+ printram("done\n");
+}
+
+int try_init_dram_ddr3_sandy(ramctr_timing *ctrl, int fast_boot,
+ int s3_resume, int me_uma_size)
+{
+ int err;
+
+ printk(BIOS_DEBUG, "Starting RAM training (%d).\n", fast_boot);
+
+ if (!fast_boot) {
+ /* Find fastest common supported parameters */
+ dram_find_common_params(ctrl);
+
+ dram_dimm_mapping(ctrl);
+ }
+
+ /* Set MCU frequency */
+ dram_freq(ctrl);
+
+ if (!fast_boot) {
+ /* Calculate timings */
+ dram_timing(ctrl);
+ }
+
+ /* Set version register */
+ MCHBAR32(0x5034) = 0xC04EB002;
+
+ /* Enable crossover */
+ dram_xover(ctrl);
+
+ /* Set timing and refresh registers */
+ dram_timing_regs(ctrl);
+
+ /* Power mode preset */
+ MCHBAR32(0x4e80) = 0x5500;
+
+ /* Set scheduler parameters */
+ MCHBAR32(0x4c20) = 0x10100005;
+
+ /* Set CPU specific register */
+ set_4f8c();
+
+ /* Clear IO reset bit */
+ MCHBAR32(0x5030) &= ~0x20;
+
+ /* Set MAD-DIMM registers */
+ dram_dimm_set_mapping(ctrl);
+ printk(BIOS_DEBUG, "Done dimm mapping\n");
+
+ /* Zone config */
+ dram_zones(ctrl, 1);
+
+ /* Set memory map */
+ dram_memorymap(ctrl, me_uma_size);
+ printk(BIOS_DEBUG, "Done memory map\n");
+
+ /* Set IO registers */
+ dram_ioregs(ctrl);
+ printk(BIOS_DEBUG, "Done io registers\n");
+
+ udelay(1);
+
+ if (fast_boot) {
+ restore_timings(ctrl);
+ } else {
+ /* Do jedec ddr3 reset sequence */
+ dram_jedecreset(ctrl);
+ printk(BIOS_DEBUG, "Done jedec reset\n");
+
+ /* MRS commands */
+ dram_mrscommands(ctrl);
+ printk(BIOS_DEBUG, "Done MRS commands\n");
+
+ /* Prepare for memory training */
+ prepare_training(ctrl);
+
+ err = read_training(ctrl);
+ if (err)
+ return err;
+
+ err = write_training(ctrl);
+ if (err)
+ return err;
+
+ printram("CP5a\n");
+
+ err = discover_edges(ctrl);
+ if (err)
+ return err;
+
+ printram("CP5b\n");
+
+ err = command_training(ctrl);
+ if (err)
+ return err;
+
+ printram("CP5c\n");
+
+ err = discover_edges_write(ctrl);
+ if (err)
+ return err;
+
+ err = discover_timC_write(ctrl);
+ if (err)
+ return err;
+
+ normalize_training(ctrl);
+ }
+
+ set_4008c(ctrl);
+
+ write_controller_mr(ctrl);
+
+ if (!s3_resume) {
+ err = channel_test(ctrl);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}