summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/amd/persimmon/BiosCallOuts.c1024
-rw-r--r--src/mainboard/amd/persimmon/BiosCallOuts.h48
-rw-r--r--src/mainboard/amd/persimmon/Kconfig140
-rw-r--r--src/mainboard/amd/persimmon/PlatformGnbPcie.c208
-rw-r--r--src/mainboard/amd/persimmon/PlatformGnbPcieComplex.h68
-rw-r--r--src/mainboard/amd/persimmon/acpi_tables.c349
-rw-r--r--src/mainboard/amd/persimmon/agesawrapper.c831
-rw-r--r--src/mainboard/amd/persimmon/agesawrapper.h40
-rw-r--r--src/mainboard/amd/persimmon/buildOpts.c578
-rw-r--r--src/mainboard/amd/persimmon/cmos.layout10
-rw-r--r--src/mainboard/amd/persimmon/devicetree.cb171
-rw-r--r--src/mainboard/amd/persimmon/dimmSpd.c209
-rw-r--r--src/mainboard/amd/persimmon/dimmSpd.h8
-rw-r--r--src/mainboard/amd/persimmon/get_bus_conf.c131
-rw-r--r--src/mainboard/amd/persimmon/mainboard.c25
-rw-r--r--src/mainboard/amd/persimmon/mptable.c190
-rw-r--r--src/mainboard/amd/persimmon/romstage.c151
17 files changed, 2081 insertions, 2100 deletions
diff --git a/src/mainboard/amd/persimmon/BiosCallOuts.c b/src/mainboard/amd/persimmon/BiosCallOuts.c
index 3cfd741755..c8379ff16f 100644
--- a/src/mainboard/amd/persimmon/BiosCallOuts.c
+++ b/src/mainboard/amd/persimmon/BiosCallOuts.c
@@ -9,12 +9,12 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "agesawrapper.h"
@@ -26,589 +26,581 @@
STATIC BIOS_CALLOUT_STRUCT BiosCallouts[] =
{
- {AGESA_ALLOCATE_BUFFER,
- BiosAllocateBuffer
- },
+ {AGESA_ALLOCATE_BUFFER,
+ BiosAllocateBuffer
+ },
- {AGESA_DEALLOCATE_BUFFER,
- BiosDeallocateBuffer
- },
+ {AGESA_DEALLOCATE_BUFFER,
+ BiosDeallocateBuffer
+ },
- {AGESA_DO_RESET,
- BiosReset
- },
+ {AGESA_DO_RESET,
+ BiosReset
+ },
- {AGESA_LOCATE_BUFFER,
- BiosLocateBuffer
- },
+ {AGESA_LOCATE_BUFFER,
+ BiosLocateBuffer
+ },
- {AGESA_READ_SPD,
- BiosReadSpd
- },
+ {AGESA_READ_SPD,
+ BiosReadSpd
+ },
- {AGESA_READ_SPD_RECOVERY,
- BiosDefaultRet
- },
+ {AGESA_READ_SPD_RECOVERY,
+ BiosDefaultRet
+ },
- {AGESA_RUNFUNC_ONAP,
- BiosRunFuncOnAp
- },
+ {AGESA_RUNFUNC_ONAP,
+ BiosRunFuncOnAp
+ },
- {AGESA_GNB_PCIE_SLOT_RESET,
- BiosGnbPcieSlotReset
- },
+ {AGESA_GNB_PCIE_SLOT_RESET,
+ BiosGnbPcieSlotReset
+ },
- {AGESA_HOOKBEFORE_DRAM_INIT,
- BiosHookBeforeDramInit
- },
+ {AGESA_HOOKBEFORE_DRAM_INIT,
+ BiosHookBeforeDramInit
+ },
- {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY,
- BiosHookBeforeDramInitRecovery
- },
+ {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY,
+ BiosHookBeforeDramInitRecovery
+ },
- {AGESA_HOOKBEFORE_DQS_TRAINING,
- BiosHookBeforeDQSTraining
- },
+ {AGESA_HOOKBEFORE_DQS_TRAINING,
+ BiosHookBeforeDQSTraining
+ },
- {AGESA_HOOKBEFORE_EXIT_SELF_REF,
- BiosHookBeforeExitSelfRefresh
- },
+ {AGESA_HOOKBEFORE_EXIT_SELF_REF,
+ BiosHookBeforeExitSelfRefresh
+ },
};
AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- UINTN i;
- AGESA_STATUS CalloutStatus;
- UINTN CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]);
-
- CalloutStatus = AGESA_UNSUPPORTED;
-
- for (i = 0; i < CallOutCount; i++)
- {
- if (BiosCallouts[i].CalloutName == Func)
- {
- CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr);
- return CalloutStatus;
- }
- }
-
- return CalloutStatus;
+ UINTN i;
+ AGESA_STATUS CalloutStatus;
+ UINTN CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]);
+
+ CalloutStatus = AGESA_UNSUPPORTED;
+
+ for (i = 0; i < CallOutCount; i++) {
+ if (BiosCallouts[i].CalloutName == Func) {
+ CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr);
+ return CalloutStatus;
+ }
+ }
+
+ return CalloutStatus;
}
AGESA_STATUS BiosAllocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- UINT32 AvailableHeapSize;
- UINT8 *BiosHeapBaseAddr;
- UINT32 CurrNodeOffset;
- UINT32 PrevNodeOffset;
- UINT32 FreedNodeOffset;
- UINT32 BestFitNodeOffset;
- UINT32 BestFitPrevNodeOffset;
- UINT32 NextFreeOffset;
- BIOS_BUFFER_NODE *CurrNodePtr;
- BIOS_BUFFER_NODE *FreedNodePtr;
- BIOS_BUFFER_NODE *BestFitNodePtr;
- BIOS_BUFFER_NODE *BestFitPrevNodePtr;
- BIOS_BUFFER_NODE *NextFreePtr;
- BIOS_HEAP_MANAGER *BiosHeapBasePtr;
- AGESA_BUFFER_PARAMS *AllocParams;
-
- AllocParams = ((AGESA_BUFFER_PARAMS *) ConfigPtr);
- AllocParams->BufferPointer = NULL;
-
- AvailableHeapSize = BIOS_HEAP_SIZE - sizeof (BIOS_HEAP_MANAGER);
- BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
- BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
-
- if (BiosHeapBasePtr->StartOfAllocatedNodes == 0) {
- /* First allocation */
- CurrNodeOffset = sizeof (BIOS_HEAP_MANAGER);
- CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
- CurrNodePtr->BufferHandle = AllocParams->BufferHandle;
- CurrNodePtr->BufferSize = AllocParams->BufferLength;
- CurrNodePtr->NextNodeOffset = 0;
- AllocParams->BufferPointer = (UINT8 *) CurrNodePtr + sizeof (BIOS_BUFFER_NODE);
-
- /* Update the remaining free space */
- FreedNodeOffset = CurrNodeOffset + CurrNodePtr->BufferSize + sizeof (BIOS_BUFFER_NODE);
- FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
- FreedNodePtr->BufferSize = AvailableHeapSize - sizeof (BIOS_BUFFER_NODE) - CurrNodePtr->BufferSize;
- FreedNodePtr->NextNodeOffset = 0;
-
- /* Update the offsets for Allocated and Freed nodes */
- BiosHeapBasePtr->StartOfAllocatedNodes = CurrNodeOffset;
- BiosHeapBasePtr->StartOfFreedNodes = FreedNodeOffset;
- } else {
- /* Find out whether BufferHandle has been allocated on the heap. */
- /* If it has, return AGESA_BOUNDS_CHK */
- CurrNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
- CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
-
- while (CurrNodeOffset != 0) {
- CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
- if (CurrNodePtr->BufferHandle == AllocParams->BufferHandle) {
- return AGESA_BOUNDS_CHK;
- }
- CurrNodeOffset = CurrNodePtr->NextNodeOffset;
- /* If BufferHandle has not been allocated on the heap, CurrNodePtr here points
- to the end of the allocated nodes list.
- */
-
- }
- /* Find the node that best fits the requested buffer size */
- FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes;
- PrevNodeOffset = FreedNodeOffset;
- BestFitNodeOffset = 0;
- BestFitPrevNodeOffset = 0;
- while (FreedNodeOffset != 0) {
- FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
- if (FreedNodePtr->BufferSize >= (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) {
- if (BestFitNodeOffset == 0) {
- /* First node that fits the requested buffer size */
- BestFitNodeOffset = FreedNodeOffset;
- BestFitPrevNodeOffset = PrevNodeOffset;
- } else {
- /* Find out whether current node is a better fit than the previous nodes */
- BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset);
- if (BestFitNodePtr->BufferSize > FreedNodePtr->BufferSize) {
- BestFitNodeOffset = FreedNodeOffset;
- BestFitPrevNodeOffset = PrevNodeOffset;
- }
- }
- }
- PrevNodeOffset = FreedNodeOffset;
- FreedNodeOffset = FreedNodePtr->NextNodeOffset;
- } /* end of while loop */
-
-
- if (BestFitNodeOffset == 0) {
- /* If we could not find a node that fits the requested buffer */
- /* size, return AGESA_BOUNDS_CHK */
- return AGESA_BOUNDS_CHK;
- } else {
- BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset);
- BestFitPrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitPrevNodeOffset);
-
- /* If BestFitNode is larger than the requested buffer, fragment the node further */
- if (BestFitNodePtr->BufferSize > (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) {
- NextFreeOffset = BestFitNodeOffset + AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE);
-
- NextFreePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextFreeOffset);
- NextFreePtr->BufferSize = BestFitNodePtr->BufferSize - (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE));
- NextFreePtr->NextNodeOffset = BestFitNodePtr->NextNodeOffset;
- } else {
- /* Otherwise, next free node is NextNodeOffset of BestFitNode */
- NextFreeOffset = BestFitNodePtr->NextNodeOffset;
- }
-
- /* If BestFitNode is the first buffer in the list, then update
- StartOfFreedNodes to reflect the new free node
- */
- if (BestFitNodeOffset == BiosHeapBasePtr->StartOfFreedNodes) {
- BiosHeapBasePtr->StartOfFreedNodes = NextFreeOffset;
- } else {
- BestFitPrevNodePtr->NextNodeOffset = NextFreeOffset;
- }
-
- /* Add BestFitNode to the list of Allocated nodes */
- CurrNodePtr->NextNodeOffset = BestFitNodeOffset;
- BestFitNodePtr->BufferSize = AllocParams->BufferLength;
- BestFitNodePtr->BufferHandle = AllocParams->BufferHandle;
- BestFitNodePtr->NextNodeOffset = 0;
-
- /* Remove BestFitNode from list of Freed nodes */
- AllocParams->BufferPointer = (UINT8 *) BestFitNodePtr + sizeof (BIOS_BUFFER_NODE);
- }
- }
-
- return AGESA_SUCCESS;
+ UINT32 AvailableHeapSize;
+ UINT8 *BiosHeapBaseAddr;
+ UINT32 CurrNodeOffset;
+ UINT32 PrevNodeOffset;
+ UINT32 FreedNodeOffset;
+ UINT32 BestFitNodeOffset;
+ UINT32 BestFitPrevNodeOffset;
+ UINT32 NextFreeOffset;
+ BIOS_BUFFER_NODE *CurrNodePtr;
+ BIOS_BUFFER_NODE *FreedNodePtr;
+ BIOS_BUFFER_NODE *BestFitNodePtr;
+ BIOS_BUFFER_NODE *BestFitPrevNodePtr;
+ BIOS_BUFFER_NODE *NextFreePtr;
+ BIOS_HEAP_MANAGER *BiosHeapBasePtr;
+ AGESA_BUFFER_PARAMS *AllocParams;
+
+ AllocParams = ((AGESA_BUFFER_PARAMS *) ConfigPtr);
+ AllocParams->BufferPointer = NULL;
+
+ AvailableHeapSize = BIOS_HEAP_SIZE - sizeof (BIOS_HEAP_MANAGER);
+ BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
+ BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
+
+ if (BiosHeapBasePtr->StartOfAllocatedNodes == 0) {
+ /* First allocation */
+ CurrNodeOffset = sizeof (BIOS_HEAP_MANAGER);
+ CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
+ CurrNodePtr->BufferHandle = AllocParams->BufferHandle;
+ CurrNodePtr->BufferSize = AllocParams->BufferLength;
+ CurrNodePtr->NextNodeOffset = 0;
+ AllocParams->BufferPointer = (UINT8 *) CurrNodePtr + sizeof (BIOS_BUFFER_NODE);
+
+ /* Update the remaining free space */
+ FreedNodeOffset = CurrNodeOffset + CurrNodePtr->BufferSize + sizeof (BIOS_BUFFER_NODE);
+ FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
+ FreedNodePtr->BufferSize = AvailableHeapSize - sizeof (BIOS_BUFFER_NODE) - CurrNodePtr->BufferSize;
+ FreedNodePtr->NextNodeOffset = 0;
+
+ /* Update the offsets for Allocated and Freed nodes */
+ BiosHeapBasePtr->StartOfAllocatedNodes = CurrNodeOffset;
+ BiosHeapBasePtr->StartOfFreedNodes = FreedNodeOffset;
+ } else {
+ /* Find out whether BufferHandle has been allocated on the heap. */
+ /* If it has, return AGESA_BOUNDS_CHK */
+ CurrNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
+ CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
+
+ while (CurrNodeOffset != 0) {
+ CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
+ if (CurrNodePtr->BufferHandle == AllocParams->BufferHandle) {
+ return AGESA_BOUNDS_CHK;
+ }
+ CurrNodeOffset = CurrNodePtr->NextNodeOffset;
+ /* If BufferHandle has not been allocated on the heap, CurrNodePtr here points
+ to the end of the allocated nodes list.
+ */
+ }
+ /* Find the node that best fits the requested buffer size */
+ FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes;
+ PrevNodeOffset = FreedNodeOffset;
+ BestFitNodeOffset = 0;
+ BestFitPrevNodeOffset = 0;
+ while (FreedNodeOffset != 0) {
+ FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
+ if (FreedNodePtr->BufferSize >= (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) {
+ if (BestFitNodeOffset == 0) {
+ /* First node that fits the requested buffer size */
+ BestFitNodeOffset = FreedNodeOffset;
+ BestFitPrevNodeOffset = PrevNodeOffset;
+ } else {
+ /* Find out whether current node is a better fit than the previous nodes */
+ BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset);
+ if (BestFitNodePtr->BufferSize > FreedNodePtr->BufferSize) {
+ BestFitNodeOffset = FreedNodeOffset;
+ BestFitPrevNodeOffset = PrevNodeOffset;
+ }
+ }
+ }
+ PrevNodeOffset = FreedNodeOffset;
+ FreedNodeOffset = FreedNodePtr->NextNodeOffset;
+ } /* end of while loop */
+
+
+ if (BestFitNodeOffset == 0) {
+ /* If we could not find a node that fits the requested buffer */
+ /* size, return AGESA_BOUNDS_CHK */
+ return AGESA_BOUNDS_CHK;
+ } else {
+ BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset);
+ BestFitPrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitPrevNodeOffset);
+
+ /* If BestFitNode is larger than the requested buffer, fragment the node further */
+ if (BestFitNodePtr->BufferSize > (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) {
+ NextFreeOffset = BestFitNodeOffset + AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE);
+
+ NextFreePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextFreeOffset);
+ NextFreePtr->BufferSize = BestFitNodePtr->BufferSize - (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE));
+ NextFreePtr->NextNodeOffset = BestFitNodePtr->NextNodeOffset;
+ } else {
+ /* Otherwise, next free node is NextNodeOffset of BestFitNode */
+ NextFreeOffset = BestFitNodePtr->NextNodeOffset;
+ }
+
+ /* If BestFitNode is the first buffer in the list, then update
+ StartOfFreedNodes to reflect the new free node
+ */
+ if (BestFitNodeOffset == BiosHeapBasePtr->StartOfFreedNodes) {
+ BiosHeapBasePtr->StartOfFreedNodes = NextFreeOffset;
+ } else {
+ BestFitPrevNodePtr->NextNodeOffset = NextFreeOffset;
+ }
+
+ /* Add BestFitNode to the list of Allocated nodes */
+ CurrNodePtr->NextNodeOffset = BestFitNodeOffset;
+ BestFitNodePtr->BufferSize = AllocParams->BufferLength;
+ BestFitNodePtr->BufferHandle = AllocParams->BufferHandle;
+ BestFitNodePtr->NextNodeOffset = 0;
+
+ /* Remove BestFitNode from list of Freed nodes */
+ AllocParams->BufferPointer = (UINT8 *) BestFitNodePtr + sizeof (BIOS_BUFFER_NODE);
+ }
+ }
+
+ return AGESA_SUCCESS;
}
AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- UINT8 *BiosHeapBaseAddr;
- UINT32 AllocNodeOffset;
- UINT32 PrevNodeOffset;
- UINT32 NextNodeOffset;
- UINT32 FreedNodeOffset;
- UINT32 EndNodeOffset;
- BIOS_BUFFER_NODE *AllocNodePtr;
- BIOS_BUFFER_NODE *PrevNodePtr;
- BIOS_BUFFER_NODE *FreedNodePtr;
- BIOS_BUFFER_NODE *NextNodePtr;
- BIOS_HEAP_MANAGER *BiosHeapBasePtr;
- AGESA_BUFFER_PARAMS *AllocParams;
-
- BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
- BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
-
- AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr;
-
- /* Find target node to deallocate in list of allocated nodes.
- Return AGESA_BOUNDS_CHK if the BufferHandle is not found
- */
- AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
- AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
- PrevNodeOffset = AllocNodeOffset;
-
- while (AllocNodePtr->BufferHandle != AllocParams->BufferHandle) {
- if (AllocNodePtr->NextNodeOffset == 0) {
- return AGESA_BOUNDS_CHK;
- }
- PrevNodeOffset = AllocNodeOffset;
- AllocNodeOffset = AllocNodePtr->NextNodeOffset;
- AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
- }
-
- /* Remove target node from list of allocated nodes */
- PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset);
- PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset;
-
- /* Zero out the buffer, and clear the BufferHandle */
- LibAmdMemFill ((UINT8 *)AllocNodePtr + sizeof (BIOS_BUFFER_NODE), 0, AllocNodePtr->BufferSize, &(AllocParams->StdHeader));
- AllocNodePtr->BufferHandle = 0;
- AllocNodePtr->BufferSize += sizeof (BIOS_BUFFER_NODE);
-
- /* Add deallocated node in order to the list of freed nodes */
- FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes;
- FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
-
- EndNodeOffset = AllocNodeOffset + AllocNodePtr->BufferSize;
-
- if (AllocNodeOffset < FreedNodeOffset) {
- /* Add to the start of the freed list */
- if (EndNodeOffset == FreedNodeOffset) {
- /* If the freed node is adjacent to the first node in the list, concatenate both nodes */
- AllocNodePtr->BufferSize += FreedNodePtr->BufferSize;
- AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset;
-
- /* Clear the BufferSize and NextNodeOffset of the previous first node */
- FreedNodePtr->BufferSize = 0;
- FreedNodePtr->NextNodeOffset = 0;
-
- } else {
- /* Otherwise, add freed node to the start of the list
- Update NextNodeOffset and BufferSize to include the
- size of BIOS_BUFFER_NODE
- */
- AllocNodePtr->NextNodeOffset = FreedNodeOffset;
- }
- /* Update StartOfFreedNodes to the new first node */
- BiosHeapBasePtr->StartOfFreedNodes = AllocNodeOffset;
- } else {
- /* Traverse list of freed nodes to find where the deallocated node
- should be place
- */
- NextNodeOffset = FreedNodeOffset;
- NextNodePtr = FreedNodePtr;
- while (AllocNodeOffset > NextNodeOffset) {
- PrevNodeOffset = NextNodeOffset;
- if (NextNodePtr->NextNodeOffset == 0) {
- break;
- }
- NextNodeOffset = NextNodePtr->NextNodeOffset;
- NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset);
- }
-
- /* If deallocated node is adjacent to the next node,
- concatenate both nodes
- */
- if (NextNodeOffset == EndNodeOffset) {
- NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset);
- AllocNodePtr->BufferSize += NextNodePtr->BufferSize;
- AllocNodePtr->NextNodeOffset = NextNodePtr->NextNodeOffset;
-
- NextNodePtr->BufferSize = 0;
- NextNodePtr->NextNodeOffset = 0;
- } else {
- /*AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset; */
- AllocNodePtr->NextNodeOffset = NextNodeOffset;
- }
- /* If deallocated node is adjacent to the previous node,
- concatenate both nodes
- */
- PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset);
- EndNodeOffset = PrevNodeOffset + PrevNodePtr->BufferSize;
- if (AllocNodeOffset == EndNodeOffset) {
- PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset;
- PrevNodePtr->BufferSize += AllocNodePtr->BufferSize;
-
- AllocNodePtr->BufferSize = 0;
- AllocNodePtr->NextNodeOffset = 0;
- } else {
- PrevNodePtr->NextNodeOffset = AllocNodeOffset;
- }
- }
- return AGESA_SUCCESS;
+ UINT8 *BiosHeapBaseAddr;
+ UINT32 AllocNodeOffset;
+ UINT32 PrevNodeOffset;
+ UINT32 NextNodeOffset;
+ UINT32 FreedNodeOffset;
+ UINT32 EndNodeOffset;
+ BIOS_BUFFER_NODE *AllocNodePtr;
+ BIOS_BUFFER_NODE *PrevNodePtr;
+ BIOS_BUFFER_NODE *FreedNodePtr;
+ BIOS_BUFFER_NODE *NextNodePtr;
+ BIOS_HEAP_MANAGER *BiosHeapBasePtr;
+ AGESA_BUFFER_PARAMS *AllocParams;
+
+ BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
+ BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
+
+ AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr;
+
+ /* Find target node to deallocate in list of allocated nodes.
+ Return AGESA_BOUNDS_CHK if the BufferHandle is not found
+ */
+ AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
+ AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+ PrevNodeOffset = AllocNodeOffset;
+
+ while (AllocNodePtr->BufferHandle != AllocParams->BufferHandle) {
+ if (AllocNodePtr->NextNodeOffset == 0) {
+ return AGESA_BOUNDS_CHK;
+ }
+ PrevNodeOffset = AllocNodeOffset;
+ AllocNodeOffset = AllocNodePtr->NextNodeOffset;
+ AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+ }
+
+ /* Remove target node from list of allocated nodes */
+ PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset);
+ PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset;
+
+ /* Zero out the buffer, and clear the BufferHandle */
+ LibAmdMemFill ((UINT8 *)AllocNodePtr + sizeof (BIOS_BUFFER_NODE), 0, AllocNodePtr->BufferSize, &(AllocParams->StdHeader));
+ AllocNodePtr->BufferHandle = 0;
+ AllocNodePtr->BufferSize += sizeof (BIOS_BUFFER_NODE);
+
+ /* Add deallocated node in order to the list of freed nodes */
+ FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes;
+ FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
+
+ EndNodeOffset = AllocNodeOffset + AllocNodePtr->BufferSize;
+
+ if (AllocNodeOffset < FreedNodeOffset) {
+ /* Add to the start of the freed list */
+ if (EndNodeOffset == FreedNodeOffset) {
+ /* If the freed node is adjacent to the first node in the list, concatenate both nodes */
+ AllocNodePtr->BufferSize += FreedNodePtr->BufferSize;
+ AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset;
+
+ /* Clear the BufferSize and NextNodeOffset of the previous first node */
+ FreedNodePtr->BufferSize = 0;
+ FreedNodePtr->NextNodeOffset = 0;
+ } else {
+ /* Otherwise, add freed node to the start of the list
+ Update NextNodeOffset and BufferSize to include the
+ size of BIOS_BUFFER_NODE
+ */
+ AllocNodePtr->NextNodeOffset = FreedNodeOffset;
+ }
+ /* Update StartOfFreedNodes to the new first node */
+ BiosHeapBasePtr->StartOfFreedNodes = AllocNodeOffset;
+ } else {
+ /* Traverse list of freed nodes to find where the deallocated node
+ should be place
+ */
+ NextNodeOffset = FreedNodeOffset;
+ NextNodePtr = FreedNodePtr;
+ while (AllocNodeOffset > NextNodeOffset) {
+ PrevNodeOffset = NextNodeOffset;
+ if (NextNodePtr->NextNodeOffset == 0) {
+ break;
+ }
+ NextNodeOffset = NextNodePtr->NextNodeOffset;
+ NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset);
+ }
+
+ /* If deallocated node is adjacent to the next node,
+ concatenate both nodes
+ */
+ if (NextNodeOffset == EndNodeOffset) {
+ NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset);
+ AllocNodePtr->BufferSize += NextNodePtr->BufferSize;
+ AllocNodePtr->NextNodeOffset = NextNodePtr->NextNodeOffset;
+
+ NextNodePtr->BufferSize = 0;
+ NextNodePtr->NextNodeOffset = 0;
+ } else {
+ /*AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset; */
+ AllocNodePtr->NextNodeOffset = NextNodeOffset;
+ }
+ /* If deallocated node is adjacent to the previous node,
+ concatenate both nodes
+ */
+ PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset);
+ EndNodeOffset = PrevNodeOffset + PrevNodePtr->BufferSize;
+ if (AllocNodeOffset == EndNodeOffset) {
+ PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset;
+ PrevNodePtr->BufferSize += AllocNodePtr->BufferSize;
+ AllocNodePtr->BufferSize = 0;
+ AllocNodePtr->NextNodeOffset = 0;
+ } else {
+ PrevNodePtr->NextNodeOffset = AllocNodeOffset;
+ }
+ }
+ return AGESA_SUCCESS;
}
AGESA_STATUS BiosLocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- UINT32 AllocNodeOffset;
- UINT8 *BiosHeapBaseAddr;
- BIOS_BUFFER_NODE *AllocNodePtr;
- BIOS_HEAP_MANAGER *BiosHeapBasePtr;
- AGESA_BUFFER_PARAMS *AllocParams;
+ UINT32 AllocNodeOffset;
+ UINT8 *BiosHeapBaseAddr;
+ BIOS_BUFFER_NODE *AllocNodePtr;
+ BIOS_HEAP_MANAGER *BiosHeapBasePtr;
+ AGESA_BUFFER_PARAMS *AllocParams;
- AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr;
+ AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr;
- BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
- BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
+ BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
+ BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;
- AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
- AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+ AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
+ AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
- while (AllocParams->BufferHandle != AllocNodePtr->BufferHandle) {
- if (AllocNodePtr->NextNodeOffset == 0) {
- AllocParams->BufferPointer = NULL;
- AllocParams->BufferLength = 0;
- return AGESA_BOUNDS_CHK;
- } else {
- AllocNodeOffset = AllocNodePtr->NextNodeOffset;
- AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
- }
- }
+ while (AllocParams->BufferHandle != AllocNodePtr->BufferHandle) {
+ if (AllocNodePtr->NextNodeOffset == 0) {
+ AllocParams->BufferPointer = NULL;
+ AllocParams->BufferLength = 0;
+ return AGESA_BOUNDS_CHK;
+ } else {
+ AllocNodeOffset = AllocNodePtr->NextNodeOffset;
+ AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
+ }
+ }
- AllocParams->BufferPointer = (UINT8 *) ((UINT8 *) AllocNodePtr + sizeof (BIOS_BUFFER_NODE));
- AllocParams->BufferLength = AllocNodePtr->BufferSize;
+ AllocParams->BufferPointer = (UINT8 *) ((UINT8 *) AllocNodePtr + sizeof (BIOS_BUFFER_NODE));
+ AllocParams->BufferLength = AllocNodePtr->BufferSize;
- return AGESA_SUCCESS;
+ return AGESA_SUCCESS;
}
AGESA_STATUS BiosRunFuncOnAp (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- AGESA_STATUS Status;
+ AGESA_STATUS Status;
- Status = agesawrapper_amdlaterunaptask (Func, Data, ConfigPtr);
- return Status;
+ Status = agesawrapper_amdlaterunaptask (Func, Data, ConfigPtr);
+ return Status;
}
AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- AGESA_STATUS Status;
- UINT8 Value;
- UINTN ResetType;
- AMD_CONFIG_PARAMS *StdHeader;
-
- ResetType = Data;
- StdHeader = ConfigPtr;
-
- //
- // Perform the RESET based upon the ResetType. In case of
- // WARM_RESET_WHENVER and COLD_RESET_WHENEVER, the request will go to
- // AmdResetManager. During the critical condition, where reset is required
- // immediately, the reset will be invoked directly by writing 0x04 to port
- // 0xCF9 (Reset Port).
- //
- switch (ResetType) {
- case WARM_RESET_WHENEVER:
- case COLD_RESET_WHENEVER:
- break;
-
- case WARM_RESET_IMMEDIATELY:
- case COLD_RESET_IMMEDIATELY:
- Value = 0x06;
- LibAmdIoWrite (AccessWidth8, 0xCf9, &Value, StdHeader);
- break;
-
- default:
- break;
- }
-
- Status = 0;
- return Status;
+ AGESA_STATUS Status;
+ UINT8 Value;
+ UINTN ResetType;
+ AMD_CONFIG_PARAMS *StdHeader;
+
+ ResetType = Data;
+ StdHeader = ConfigPtr;
+
+ //
+ // Perform the RESET based upon the ResetType. In case of
+ // WARM_RESET_WHENVER and COLD_RESET_WHENEVER, the request will go to
+ // AmdResetManager. During the critical condition, where reset is required
+ // immediately, the reset will be invoked directly by writing 0x04 to port
+ // 0xCF9 (Reset Port).
+ //
+ switch (ResetType) {
+ case WARM_RESET_WHENEVER:
+ case COLD_RESET_WHENEVER:
+ break;
+
+ case WARM_RESET_IMMEDIATELY:
+ case COLD_RESET_IMMEDIATELY:
+ Value = 0x06;
+ LibAmdIoWrite (AccessWidth8, 0xCf9, &Value, StdHeader);
+ break;
+
+ default:
+ break;
+ }
+
+ Status = 0;
+ return Status;
}
AGESA_STATUS BiosReadSpd (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- AGESA_STATUS Status;
- Status = AmdMemoryReadSPD (Func, Data, (AGESA_READ_SPD_PARAMS *)ConfigPtr);
+ AGESA_STATUS Status;
+ Status = AmdMemoryReadSPD (Func, Data, (AGESA_READ_SPD_PARAMS *)ConfigPtr);
- return Status;
+ return Status;
}
AGESA_STATUS BiosDefaultRet (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- return AGESA_UNSUPPORTED;
+ return AGESA_UNSUPPORTED;
}
-/* Call the host environment interface to provide a user hook opportunity. */
+/* Call the host environment interface to provide a user hook opportunity. */
AGESA_STATUS BiosHookBeforeDQSTraining (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- return AGESA_SUCCESS;
+ return AGESA_SUCCESS;
}
-/* Call the host environment interface to provide a user hook opportunity. */
+/* Call the host environment interface to provide a user hook opportunity. */
AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- AGESA_STATUS Status;
- UINTN FcnData;
- MEM_DATA_STRUCT *MemData;
- UINT32 AcpiMmioAddr;
- UINT32 GpioMmioAddr;
- UINT8 Data8;
- UINT16 Data16;
- UINT8 TempData8;
-
- FcnData = Data;
- MemData = ConfigPtr;
-
- Status = AGESA_SUCCESS;
- /* Get SB MMIO Base (AcpiMmioAddr) */
- WriteIo8 (0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
- Data16 = Data8<<8;
- WriteIo8 (0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
- Data16 |= Data8;
- AcpiMmioAddr = (UINT32)Data16 << 16;
- GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
-
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~BIT5;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- TempData8 &= 0x03;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
-
- Data8 |= BIT2+BIT3;
- Data8 &= ~BIT4;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- TempData8 &= 0x23;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
-
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~BIT5;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- TempData8 &= 0x03;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
-
- Data8 |= BIT2+BIT3;
- Data8 &= ~BIT4;
- TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- TempData8 &= 0x23;
- TempData8 |= Data8;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
-
- switch(MemData->ParameterListPtr->DDR3Voltage){
- case VOLT1_35:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 |= (UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- break;
- case VOLT1_25:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- break;
- case VOLT1_5:
- default:
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
- Data8 |= (UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
- Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
- Data8 &= ~(UINT8)BIT6;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
- }
- return Status;
+ AGESA_STATUS Status;
+ UINTN FcnData;
+ MEM_DATA_STRUCT *MemData;
+ UINT32 AcpiMmioAddr;
+ UINT32 GpioMmioAddr;
+ UINT8 Data8;
+ UINT16 Data16;
+ UINT8 TempData8;
+
+ FcnData = Data;
+ MemData = ConfigPtr;
+
+ Status = AGESA_SUCCESS;
+ /* Get SB MMIO Base (AcpiMmioAddr) */
+ WriteIo8 (0xCD6, 0x27);
+ Data8 = ReadIo8(0xCD7);
+ Data16 = Data8<<8;
+ WriteIo8 (0xCD6, 0x26);
+ Data8 = ReadIo8(0xCD7);
+ Data16 |= Data8;
+ AcpiMmioAddr = (UINT32)Data16 << 16;
+ GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
+
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
+ Data8 &= ~BIT5;
+ TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
+ TempData8 &= 0x03;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
+
+ Data8 |= BIT2+BIT3;
+ Data8 &= ~BIT4;
+ TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
+ TempData8 &= 0x23;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
+
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
+ Data8 &= ~BIT5;
+ TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
+ TempData8 &= 0x03;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
+
+ Data8 |= BIT2+BIT3;
+ Data8 &= ~BIT4;
+ TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
+ TempData8 &= 0x23;
+ TempData8 |= Data8;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
+
+ switch(MemData->ParameterListPtr->DDR3Voltage){
+ case VOLT1_35:
+ Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
+ Data8 |= (UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ break;
+ case VOLT1_25:
+ Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ break;
+ case VOLT1_5:
+ default:
+ Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
+ Data8 |= (UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
+ Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
+ Data8 &= ~(UINT8)BIT6;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
+ }
+ return Status;
}
-/* Call the host environment interface to provide a user hook opportunity. */
+/* Call the host environment interface to provide a user hook opportunity. */
AGESA_STATUS BiosHookBeforeDramInitRecovery (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- return AGESA_SUCCESS;
+ return AGESA_SUCCESS;
}
-/* Call the host environment interface to provide a user hook opportunity. */
+/* Call the host environment interface to provide a user hook opportunity. */
AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- return AGESA_SUCCESS;
+ return AGESA_SUCCESS;
}
/* PCIE slot reset control */
AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
- AGESA_STATUS Status;
- UINTN FcnData;
- PCIe_SLOT_RESET_INFO *ResetInfo;
-
- UINT32 GpioMmioAddr;
- UINT32 AcpiMmioAddr;
- UINT8 Data8;
- UINT16 Data16;
-
- FcnData = Data;
- ResetInfo = ConfigPtr;
- // Get SB800 MMIO Base (AcpiMmioAddr)
- WriteIo8(0xCD6, 0x27);
- Data8 = ReadIo8(0xCD7);
- Data16=Data8<<8;
- WriteIo8(0xCD6, 0x26);
- Data8 = ReadIo8(0xCD7);
- Data16|=Data8;
- AcpiMmioAddr = (UINT32)Data16 << 16;
- Status = AGESA_UNSUPPORTED;
- GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
- switch (ResetInfo->ResetId)
- {
- case 4:
- switch (ResetInfo->ResetControl)
- {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
- Data8 &= ~(UINT8)BIT6 ;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
- Data8 |= BIT6 ;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- case 6:
- switch (ResetInfo->ResetControl)
- {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 &= ~(UINT8)BIT6 ;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 |= BIT6 ;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- case 7:
- switch (ResetInfo->ResetControl)
- {
- case AssertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
- Data8 &= ~(UINT8)BIT6 ;
- Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
- Status = AGESA_SUCCESS;
- break;
- case DeassertSlotReset:
- Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
- Data8 |= BIT6 ;
- Write64Mem8 (GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
- Status = AGESA_SUCCESS;
- break;
- }
- break;
- }
- return Status;
+ AGESA_STATUS Status;
+ UINTN FcnData;
+ PCIe_SLOT_RESET_INFO *ResetInfo;
+
+ UINT32 GpioMmioAddr;
+ UINT32 AcpiMmioAddr;
+ UINT8 Data8;
+ UINT16 Data16;
+
+ FcnData = Data;
+ ResetInfo = ConfigPtr;
+ // Get SB800 MMIO Base (AcpiMmioAddr)
+ WriteIo8(0xCD6, 0x27);
+ Data8 = ReadIo8(0xCD7);
+ Data16=Data8<<8;
+ WriteIo8(0xCD6, 0x26);
+ Data8 = ReadIo8(0xCD7);
+ Data16|=Data8;
+ AcpiMmioAddr = (UINT32)Data16 << 16;
+ Status = AGESA_UNSUPPORTED;
+ GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
+ switch (ResetInfo->ResetId)
+ {
+ case 4:
+ switch (ResetInfo->ResetControl) {
+ case AssertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
+ Data8 &= ~(UINT8)BIT6 ;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
+ Status = AGESA_SUCCESS;
+ break;
+ case DeassertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG21);
+ Data8 |= BIT6 ;
+ Write64Mem8 (GpioMmioAddr+SB_GPIO_REG21, Data8); // MXM_GPIO0. GPIO21
+ Status = AGESA_SUCCESS;
+ break;
+ }
+ break;
+ case 6:
+ switch (ResetInfo->ResetControl) {
+ case AssertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
+ Data8 &= ~(UINT8)BIT6 ;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
+ Status = AGESA_SUCCESS;
+ break;
+ case DeassertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
+ Data8 |= BIT6 ;
+ Write64Mem8 (GpioMmioAddr+SB_GPIO_REG25, Data8); // PCIE_RST#_LAN, GPIO25
+ Status = AGESA_SUCCESS;
+ break;
+ }
+ break;
+ case 7:
+ switch (ResetInfo->ResetControl) {
+ case AssertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG02);
+ Data8 &= ~(UINT8)BIT6 ;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
+ Status = AGESA_SUCCESS;
+ break;
+ case DeassertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG25);
+ Data8 |= BIT6 ;
+ Write64Mem8 (GpioMmioAddr+SB_GPIO_REG02, Data8); // MPCIE_RST0, GPIO02
+ Status = AGESA_SUCCESS;
+ break;
+ }
+ break;
+ }
+ return Status;
}
diff --git a/src/mainboard/amd/persimmon/BiosCallOuts.h b/src/mainboard/amd/persimmon/BiosCallOuts.h
index b7c78830b4..e023e38d7c 100644
--- a/src/mainboard/amd/persimmon/BiosCallOuts.h
+++ b/src/mainboard/amd/persimmon/BiosCallOuts.h
@@ -9,12 +9,12 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _BIOS_CALLOUT_H_
@@ -23,20 +23,20 @@
#include "Porting.h"
#include "AGESA.h"
-#define REQUIRED_CALLOUTS 12
-#define BIOS_HEAP_START_ADDRESS 0x00010000
-#define BIOS_HEAP_SIZE 0x20000 /* 64MB */
+#define REQUIRED_CALLOUTS 12
+#define BIOS_HEAP_START_ADDRESS 0x00010000
+#define BIOS_HEAP_SIZE 0x20000 /* 64MB */
typedef struct _BIOS_HEAP_MANAGER {
- //UINT32 AvailableSize;
- UINT32 StartOfAllocatedNodes;
- UINT32 StartOfFreedNodes;
+ //UINT32 AvailableSize;
+ UINT32 StartOfAllocatedNodes;
+ UINT32 StartOfFreedNodes;
} BIOS_HEAP_MANAGER;
typedef struct _BIOS_BUFFER_NODE {
- UINT32 BufferHandle;
- UINT32 BufferSize;
- UINT32 NextNodeOffset;
+ UINT32 BufferHandle;
+ UINT32 BufferSize;
+ UINT32 NextNodeOffset;
} BIOS_BUFFER_NODE;
/*
* CALLOUTS
@@ -54,27 +54,27 @@ AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
AGESA_STATUS BiosGetIdsInitData (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
/* AGESA ADVANCED CALLOUTS - MEMORY */
-AGESA_STATUS BiosReadSpd (UINT32 Func,UINT32 Data,VOID *ConfigPtr);
+AGESA_STATUS BiosReadSpd (UINT32 Func,UINT32 Data,VOID *ConfigPtr);
/* BIOS DEFAULT RET */
AGESA_STATUS BiosDefaultRet (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
-/* Call the host environment interface to provide a user hook opportunity. */
+/* Call the host environment interface to provide a user hook opportunity. */
AGESA_STATUS BiosHookBeforeDQSTraining (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
-/* Call the host environment interface to provide a user hook opportunity. */
+/* Call the host environment interface to provide a user hook opportunity. */
AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
-/* Call the host environment interface to provide a user hook opportunity. */
+/* Call the host environment interface to provide a user hook opportunity. */
AGESA_STATUS BiosHookBeforeDramInitRecovery (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
-/* Call the host environment interface to provide a user hook opportunity. */
+/* Call the host environment interface to provide a user hook opportunity. */
AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
/* PCIE slot reset control */
AGESA_STATUS BiosGnbPcieSlotReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
-#define SB_GPIO_REG02 2
-#define SB_GPIO_REG09 9
-#define SB_GPIO_REG10 10
-#define SB_GPIO_REG15 15
-#define SB_GPIO_REG17 17
-#define SB_GPIO_REG21 21
-#define SB_GPIO_REG25 25
-#define SB_GPIO_REG28 28
+#define SB_GPIO_REG02 2
+#define SB_GPIO_REG09 9
+#define SB_GPIO_REG10 10
+#define SB_GPIO_REG15 15
+#define SB_GPIO_REG17 17
+#define SB_GPIO_REG21 21
+#define SB_GPIO_REG25 25
+#define SB_GPIO_REG28 28
#endif //_BIOS_CALLOUT_H_
diff --git a/src/mainboard/amd/persimmon/Kconfig b/src/mainboard/amd/persimmon/Kconfig
index 93b4554670..e01e10121f 100644
--- a/src/mainboard/amd/persimmon/Kconfig
+++ b/src/mainboard/amd/persimmon/Kconfig
@@ -9,132 +9,130 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
if BOARD_AMD_PERSIMMON
config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select ARCH_X86
- select CPU_AMD_AGESA_FAMILY14
- select NORTHBRIDGE_AMD_AGESA_FAMILY14_ROOT_COMPLEX
- select NORTHBRIDGE_AMD_AGESA_FAMILY14
- select SOUTHBRIDGE_AMD_CIMX_SB800
+ def_bool y
+ select ARCH_X86
+ select CPU_AMD_AGESA_FAMILY14
+ select NORTHBRIDGE_AMD_AGESA_FAMILY14_ROOT_COMPLEX
+ select NORTHBRIDGE_AMD_AGESA_FAMILY14
+ select SOUTHBRIDGE_AMD_CIMX_SB800
select SUPERIO_FINTEK_F81865F
- select BOARD_HAS_FADT
- select HAVE_BUS_CONFIG
- select HAVE_OPTION_TABLE
- select HAVE_PIRQ_TABLE
- select HAVE_MP_TABLE
- select HAVE_MAINBOARD_RESOURCES
- select HAVE_HARD_RESET
- select SB_HT_CHAIN_UNITID_OFFSET_ONLY
- select LIFT_BSP_APIC_ID
- select SERIAL_CPU_INIT
- select AMDMCT
- select HAVE_ACPI_TABLES
- select BOARD_ROMSIZE_KB_4096
- select GFXUMA
+ select BOARD_HAS_FADT
+ select HAVE_BUS_CONFIG
+ select HAVE_OPTION_TABLE
+ select HAVE_PIRQ_TABLE
+ select HAVE_MP_TABLE
+ select HAVE_MAINBOARD_RESOURCES
+ select HAVE_HARD_RESET
+ select SB_HT_CHAIN_UNITID_OFFSET_ONLY
+ select LIFT_BSP_APIC_ID
+ select SERIAL_CPU_INIT
+ select AMDMCT
+ select HAVE_ACPI_TABLES
+ select BOARD_ROMSIZE_KB_4096
+ select GFXUMA
config AMD_AGESA
- bool
- default y
+ bool
+ default y
config MAINBOARD_DIR
- string
- default amd/persimmon
+ string
+ default amd/persimmon
config APIC_ID_OFFSET
- hex
- default 0x0
+ hex
+ default 0x0
config MAINBOARD_PART_NUMBER
- string
- default "Persimmon"
+ string
+ default "Persimmon"
config HW_MEM_HOLE_SIZEK
- hex
- default 0x200000
+ hex
+ default 0x200000
config MAX_CPUS
- int
- default 2
+ int
+ default 2
config MAX_PHYSICAL_CPUS
- int
- default 1
+ int
+ default 1
config HW_MEM_HOLE_SIZE_AUTO_INC
- bool
- default n
+ bool
+ default n
config MEM_TRAIN_SEQ
- int
- default 2
+ int
+ default 2
config IRQ_SLOT_COUNT
- int
- default 11
+ int
+ default 11
config RAMTOP
- hex
- default 0x1000000
+ hex
+ default 0x1000000
config HEAP_SIZE
- hex
- default 0xc0000
+ hex
+ default 0xc0000
config STACK_SIZE
- hex
- default 0x10000
+ hex
+ default 0x10000
config ACPI_SSDTX_NUM
- int
- default 0
+ int
+ default 0
config RAMBASE
- hex
- default 0x200000
+ hex
+ default 0x200000
config SIO_PORT
- hex
- default 0x4e
+ hex
+ default 0x4e
config ONBOARD_VGA_IS_PRIMARY
- bool
- default y
+ bool
+ default y
config VGA_BIOS
- bool
- default n
+ bool
+ default n
#config VGA_BIOS_FILE
-# string "VGA BIOS path and filename"
-# depends on VGA_BIOS
-# default "rom/video/OntarioGenericVbios.bin"
+# string "VGA BIOS path and filename"
+# depends on VGA_BIOS
+# default "rom/video/OntarioGenericVbios.bin"
config VGA_BIOS_ID
- string
- default "1002,9802"
-
+ string
+ default "1002,9802"
config SB800_AHCI_ROM
- bool
- default n
+ bool
+ default n
config DRIVERS_PS2_KEYBOARD
- bool
- default n
+ bool
+ default n
config WARNINGS_ARE_ERRORS
- bool
- default n
+ bool
+ default n
endif # BOARD_AMD_PERSIMMON
-
diff --git a/src/mainboard/amd/persimmon/PlatformGnbPcie.c b/src/mainboard/amd/persimmon/PlatformGnbPcie.c
index b0389b82d9..5e37f51205 100644
--- a/src/mainboard/amd/persimmon/PlatformGnbPcie.c
+++ b/src/mainboard/amd/persimmon/PlatformGnbPcie.c
@@ -9,12 +9,12 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "AGESA.h"
@@ -28,141 +28,141 @@
/*---------------------------------------------------------------------------------------*/
/**
- * OemCustomizeInitEarly
+ * OemCustomizeInitEarly
*
- * Description:
- * This is the stub function will call the host environment through the binary block
- * interface (call-out port) to provide a user hook opportunity
+ * Description:
+ * This is the stub function will call the host environment through the binary block
+ * interface (call-out port) to provide a user hook opportunity
*
- * Parameters:
- * @param[in] **PeiServices
- * @param[in] *InitEarly
+ * Parameters:
+ * @param[in] **PeiServices
+ * @param[in] *InitEarly
*
- * @retval VOID
+ * @retval VOID
*
**/
/*---------------------------------------------------------------------------------------*/
VOID
OemCustomizeInitEarly (
- IN OUT AMD_EARLY_PARAMS *InitEarly
- )
+ IN OUT AMD_EARLY_PARAMS *InitEarly
+ )
{
- AGESA_STATUS Status;
- VOID *BrazosPcieComplexListPtr;
- VOID *BrazosPciePortPtr;
- VOID *BrazosPcieDdiPtr;
+ AGESA_STATUS Status;
+ VOID *BrazosPcieComplexListPtr;
+ VOID *BrazosPciePortPtr;
+ VOID *BrazosPcieDdiPtr;
- ALLOCATE_HEAP_PARAMS AllocHeapParams;
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
PCIe_PORT_DESCRIPTOR PortList [] = {
- // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...)
- {
- 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
- PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 4)
- },
+ // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...)
+ {
+ 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 4)
+ },
#if 1
- // Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...)
- {
- 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
- PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 5)
- },
- // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...)
- {
- 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
- PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 6)
- },
- // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...)
- {
- 0,
- PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 7)
- },
+ // Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...)
+ {
+ 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 5)
+ },
+ // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...)
+ {
+ 0, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 6)
+ },
+ // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...)
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 7)
+ },
#endif
- // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...)
- {
- DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
- PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3),
- PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0)
- }
+ // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...)
+ {
+ DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0)
+ }
};
PCIe_DDI_DESCRIPTOR DdiList [] = {
- // Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...)
- {
- 0, //Descriptor flags
- PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11),
- //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1)
- {ConnectorTypeDP, Aux1, Hdp1}
- },
- // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...)
- {
- DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
- PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
- //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2)
- {ConnectorTypeDP, Aux2, Hdp2}
- }
+ // Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...)
+ {
+ 0, //Descriptor flags
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11),
+ //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1)
+ {ConnectorTypeDP, Aux1, Hdp1}
+ },
+ // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...)
+ {
+ DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
+ //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2)
+ {ConnectorTypeDP, Aux2, Hdp2}
+ }
};
PCIe_COMPLEX_DESCRIPTOR Brazos = {
- DESCRIPTOR_TERMINATE_LIST,
- 0,
- &PortList[0],
- &DdiList[0]
+ DESCRIPTOR_TERMINATE_LIST,
+ 0,
+ &PortList[0],
+ &DdiList[0]
};
- // GNB PCIe topology Porting
+ // GNB PCIe topology Porting
- //
- // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR
- //
- AllocHeapParams.RequestedBufferSize = (sizeof (PCIe_COMPLEX_DESCRIPTOR) +
- sizeof (PCIe_PORT_DESCRIPTOR) * 5 +
- sizeof (PCIe_DDI_DESCRIPTOR)) * 2;
+ //
+ // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR
+ //
+ AllocHeapParams.RequestedBufferSize = (sizeof (PCIe_COMPLEX_DESCRIPTOR) +
+ sizeof (PCIe_PORT_DESCRIPTOR) * 5 +
+ sizeof (PCIe_DDI_DESCRIPTOR)) * 2;
- AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START;
- AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
- Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader);
- if ( Status!= AGESA_SUCCESS) {
- // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR
- ASSERT(FALSE);
- return;
- }
+ AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader);
+ if ( Status!= AGESA_SUCCESS) {
+ // Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR
+ ASSERT(FALSE);
+ return;
+ }
- BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr;
+ BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr;
- AllocHeapParams.BufferPtr += sizeof (PCIe_COMPLEX_DESCRIPTOR);
- BrazosPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += sizeof (PCIe_COMPLEX_DESCRIPTOR);
+ BrazosPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr;
- AllocHeapParams.BufferPtr += sizeof (PCIe_PORT_DESCRIPTOR) * 5;
- BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr;
+ AllocHeapParams.BufferPtr += sizeof (PCIe_PORT_DESCRIPTOR) * 5;
+ BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr;
- LibAmdMemFill (BrazosPcieComplexListPtr,
- 0,
- sizeof (PCIe_COMPLEX_DESCRIPTOR),
- &InitEarly->StdHeader);
+ LibAmdMemFill (BrazosPcieComplexListPtr,
+ 0,
+ sizeof (PCIe_COMPLEX_DESCRIPTOR),
+ &InitEarly->StdHeader);
- LibAmdMemFill (BrazosPciePortPtr,
- 0,
- sizeof (PCIe_PORT_DESCRIPTOR) * 5,
- &InitEarly->StdHeader);
+ LibAmdMemFill (BrazosPciePortPtr,
+ 0,
+ sizeof (PCIe_PORT_DESCRIPTOR) * 5,
+ &InitEarly->StdHeader);
- LibAmdMemFill (BrazosPcieDdiPtr,
- 0,
- sizeof (PCIe_DDI_DESCRIPTOR) * 2,
- &InitEarly->StdHeader);
+ LibAmdMemFill (BrazosPcieDdiPtr,
+ 0,
+ sizeof (PCIe_DDI_DESCRIPTOR) * 2,
+ &InitEarly->StdHeader);
- LibAmdMemCopy (BrazosPcieComplexListPtr, &Brazos, sizeof (PCIe_COMPLEX_DESCRIPTOR), &InitEarly->StdHeader);
- LibAmdMemCopy (BrazosPciePortPtr, &PortList[0], sizeof (PCIe_PORT_DESCRIPTOR) * 5, &InitEarly->StdHeader);
- LibAmdMemCopy (BrazosPcieDdiPtr, &DdiList[0], sizeof (PCIe_DDI_DESCRIPTOR) *2, &InitEarly->StdHeader);
+ LibAmdMemCopy (BrazosPcieComplexListPtr, &Brazos, sizeof (PCIe_COMPLEX_DESCRIPTOR), &InitEarly->StdHeader);
+ LibAmdMemCopy (BrazosPciePortPtr, &PortList[0], sizeof (PCIe_PORT_DESCRIPTOR) * 5, &InitEarly->StdHeader);
+ LibAmdMemCopy (BrazosPcieDdiPtr, &DdiList[0], sizeof (PCIe_DDI_DESCRIPTOR) *2, &InitEarly->StdHeader);
- ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr;
- ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr;
+ ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr;
+ ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr;
- InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr;
- InitEarly->GnbConfig.PsppPolicy = 0;
+ InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr;
+ InitEarly->GnbConfig.PsppPolicy = 0;
}
diff --git a/src/mainboard/amd/persimmon/PlatformGnbPcieComplex.h b/src/mainboard/amd/persimmon/PlatformGnbPcieComplex.h
index b51089f7f6..b50cb1a371 100644
--- a/src/mainboard/amd/persimmon/PlatformGnbPcieComplex.h
+++ b/src/mainboard/amd/persimmon/PlatformGnbPcieComplex.h
@@ -9,12 +9,12 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H
@@ -25,48 +25,48 @@
#include "amdlib.h"
//GNB GPP Port4
-#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable
-#define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
-#define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
-#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
- //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
-#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port5
-#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable
-#define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
-#define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
-#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
- //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
-#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port6
-#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable
-#define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
-#define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
-#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
- //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
-#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port7
-#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable
-#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
-#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
-#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
- //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
-#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
//GNB GPP Port8
-#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable
-#define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
-#define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
-#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
- //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
-#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
VOID
OemCustomizeInitEarly (
- IN OUT AMD_EARLY_PARAMS *InitEarly
- );
+ IN OUT AMD_EARLY_PARAMS *InitEarly
+ );
#endif //_PLATFORM_GNB_PCIE_COMPLEX_H
diff --git a/src/mainboard/amd/persimmon/acpi_tables.c b/src/mainboard/amd/persimmon/acpi_tables.c
index 7c5aa390df..637a304cef 100644
--- a/src/mainboard/amd/persimmon/acpi_tables.c
+++ b/src/mainboard/amd/persimmon/acpi_tables.c
@@ -9,12 +9,12 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
@@ -35,15 +35,15 @@
static void dump_mem(u32 start, u32 end)
{
- u32 i;
- print_debug("dump_mem:");
- for (i = start; i < end; i++) {
- if ((i & 0xf) == 0) {
- printk(BIOS_DEBUG, "\n%08x:", i);
- }
- printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i));
- }
- print_debug("\n");
+ u32 i;
+ print_debug("dump_mem:");
+ for (i = start; i < end; i++) {
+ if ((i & 0xf) == 0) {
+ printk(BIOS_DEBUG, "\n%08x:", i);
+ }
+ printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i));
+ }
+ print_debug("\n");
}
#endif
@@ -52,193 +52,194 @@ extern const unsigned char AmlCode_ssdt[];
unsigned long acpi_fill_mcfg(unsigned long current)
{
- /* Just a dummy */
- return current;
+ /* Just a dummy */
+ return current;
}
unsigned long acpi_fill_madt(unsigned long current)
{
- /* create all subtables for processors */
- current = acpi_create_madt_lapics(current);
-
- /* Write SB800 IOAPIC, only one */
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS,
- IO_APIC_ADDR, 0);
-
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
- current, 0, 0, 2, 0);
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
- current, 0, 9, 9, 0xF);
- /* 0: mean bus 0--->ISA */
- /* 0: PIC 0 */
- /* 2: APIC 2 */
- /* 5 mean: 0101 --> Edige-triggered, Active high */
-
- /* create all subtables for processors */
- /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */
- /* 1: LINT1 connect to NMI */
-
- return current;
+ /* create all subtables for processors */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write SB800 IOAPIC, only one */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+ CONFIG_MAX_CPUS, IO_APIC_ADDR, 0);
+
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0);
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, 0xF);
+
+ /* 0: mean bus 0--->ISA */
+ /* 0: PIC 0 */
+ /* 2: APIC 2 */
+ /* 5 mean: 0101 --> Edige-triggered, Active high */
+
+ /* create all subtables for processors */
+ /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */
+ /* 1: LINT1 connect to NMI */
+
+ return current;
}
unsigned long acpi_fill_slit(unsigned long current)
{
- // Not implemented
- return current;
+ // Not implemented
+ return current;
}
unsigned long acpi_fill_srat(unsigned long current)
{
- /* No NUMA, no SRAT */
- return current;
+ /* No NUMA, no SRAT */
+ return current;
}
unsigned long write_acpi_tables(unsigned long start)
{
- unsigned long current;
- acpi_rsdp_t *rsdp;
- acpi_rsdt_t *rsdt;
- acpi_hpet_t *hpet;
- acpi_madt_t *madt;
- acpi_srat_t *srat;
- acpi_slit_t *slit;
- acpi_fadt_t *fadt;
- acpi_facs_t *facs;
- acpi_header_t *dsdt;
- acpi_header_t *ssdt;
-
- get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */
-
- /* Align ACPI tables to 16 bytes */
- start = (start + 0x0f) & -0x10;
- current = start;
-
- printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
-
- /* We need at least an RSDP and an RSDT Table */
- rsdp = (acpi_rsdp_t *) current;
- current += sizeof(acpi_rsdp_t);
- rsdt = (acpi_rsdt_t *) current;
- current += sizeof(acpi_rsdt_t);
-
- /* clear all table memory */
- memset((void *)start, 0, current - start);
-
- acpi_write_rsdp(rsdp, rsdt, NULL);
- acpi_write_rsdt(rsdt);
-
- /* DSDT */
- current = ( current + 0x07) & -0x08;
- printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current);
- dsdt = (acpi_header_t *)current; // it will used by fadt
- memcpy(dsdt, &AmlCode, sizeof(acpi_header_t));
- current += dsdt->length;
- memcpy(dsdt, &AmlCode, dsdt->length);
- printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length);
-
- /* FACS */ // it needs 64 bit alignment
- current = ( current + 0x07) & -0x08;
- printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current);
- facs = (acpi_facs_t *) current; // it will be used by fadt
- current += sizeof(acpi_facs_t);
- acpi_create_facs(facs);
-
- /* FDAT */
- current = ( current + 0x07) & -0x08;
- printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current);
- fadt = (acpi_fadt_t *) current;
- current += sizeof(acpi_fadt_t);
-
- acpi_create_fadt(fadt, facs, dsdt);
- acpi_add_table(rsdp, fadt);
-
- /*
- * We explicitly add these tables later on:
- */
- current = ( current + 0x07) & -0x08;
- printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current);
- hpet = (acpi_hpet_t *) current;
- current += sizeof(acpi_hpet_t);
- acpi_create_hpet(hpet);
- acpi_add_table(rsdp, hpet);
-
- /* If we want to use HPET Timers Linux wants an MADT */
- current = ( current + 0x07) & -0x08;
- printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current);
- madt = (acpi_madt_t *) current;
- acpi_create_madt(madt);
- current += madt->header.length;
- acpi_add_table(rsdp, madt);
-
- /* SRAT */
- current = ( current + 0x07) & -0x08;
- printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current);
- srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT);
- if (srat != NULL) {
- memcpy((void *)current, srat, srat->header.length);
- srat = (acpi_srat_t *) current;
- //acpi_create_srat(srat);
- current += srat->header.length;
- acpi_add_table(rsdp, srat);
- }
-
- /* SLIT */
- current = ( current + 0x07) & -0x08;
- printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current);
- slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT);
- if (slit != NULL) {
- memcpy((void *)current, slit, slit->header.length);
- slit = (acpi_slit_t *) current;
- //acpi_create_slit(slit);
- current += slit->header.length;
- acpi_add_table(rsdp, slit);
- }
-
- /* SSDT */
- current = ( current + 0x0f) & -0x10;
- printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current);
- ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE);
- if (ssdt != NULL) {
- memcpy((void *)current, ssdt, ssdt->length);
- ssdt = (acpi_header_t *) current;
- current += ssdt->length;
- }
- else {
- ssdt = (acpi_header_t *) current;
- memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t));
- current += ssdt->length;
- memcpy(ssdt, &AmlCode_ssdt, ssdt->length);
- /* recalculate checksum */
- ssdt->checksum = 0;
- ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length);
- }
- acpi_add_table(rsdp,ssdt);
-
- printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current);
+ unsigned long current;
+ acpi_rsdp_t *rsdp;
+ acpi_rsdt_t *rsdt;
+ acpi_hpet_t *hpet;
+ acpi_madt_t *madt;
+ acpi_srat_t *srat;
+ acpi_slit_t *slit;
+ acpi_fadt_t *fadt;
+ acpi_facs_t *facs;
+ acpi_header_t *dsdt;
+ acpi_header_t *ssdt;
+
+ get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */
+
+ /* Align ACPI tables to 16 bytes */
+ start = (start + 0x0f) & -0x10;
+ current = start;
+
+ printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
+
+ /* We need at least an RSDP and an RSDT Table */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+
+ /* clear all table memory */
+ memset((void *)start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt, NULL);
+ acpi_write_rsdt(rsdt);
+
+ /* DSDT */
+ current = ( current + 0x07) & -0x08;
+ printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current);
+ dsdt = (acpi_header_t *)current; // it will used by fadt
+ memcpy(dsdt, &AmlCode, sizeof(acpi_header_t));
+ current += dsdt->length;
+ memcpy(dsdt, &AmlCode, dsdt->length);
+ printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length);
+
+ /* FACS */ // it needs 64 bit alignment
+ current = ( current + 0x07) & -0x08;
+ printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current);
+ facs = (acpi_facs_t *) current; // it will be used by fadt
+ current += sizeof(acpi_facs_t);
+ acpi_create_facs(facs);
+
+ /* FDAT */
+ current = ( current + 0x07) & -0x08;
+ printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current);
+ fadt = (acpi_fadt_t *) current;
+ current += sizeof(acpi_fadt_t);
+
+ acpi_create_fadt(fadt, facs, dsdt);
+ acpi_add_table(rsdp, fadt);
+
+ /*
+ * We explicitly add these tables later on:
+ */
+ current = ( current + 0x07) & -0x08;
+ printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current);
+ hpet = (acpi_hpet_t *) current;
+ current += sizeof(acpi_hpet_t);
+ acpi_create_hpet(hpet);
+ acpi_add_table(rsdp, hpet);
+
+ /* If we want to use HPET Timers Linux wants an MADT */
+ current = ( current + 0x07) & -0x08;
+ printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current);
+ madt = (acpi_madt_t *) current;
+ acpi_create_madt(madt);
+ current += madt->header.length;
+ acpi_add_table(rsdp, madt);
+
+ /* SRAT */
+ current = ( current + 0x07) & -0x08;
+ printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current);
+ srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT);
+ if (srat != NULL) {
+ memcpy((void *)current, srat, srat->header.length);
+ srat = (acpi_srat_t *) current;
+ //acpi_create_srat(srat);
+ current += srat->header.length;
+ acpi_add_table(rsdp, srat);
+ }
+
+ /* SLIT */
+ current = ( current + 0x07) & -0x08;
+ printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current);
+ slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT);
+ if (slit != NULL) {
+ memcpy((void *)current, slit, slit->header.length);
+ slit = (acpi_slit_t *) current;
+ //acpi_create_slit(slit);
+ current += slit->header.length;
+ acpi_add_table(rsdp, slit);
+ }
+
+ /* SSDT */
+ current = ( current + 0x0f) & -0x10;
+ printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current);
+ ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE);
+ if (ssdt != NULL) {
+ memcpy((void *)current, ssdt, ssdt->length);
+ ssdt = (acpi_header_t *) current;
+ current += ssdt->length;
+ }
+ else {
+ ssdt = (acpi_header_t *) current;
+ memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t));
+ current += ssdt->length;
+ memcpy(ssdt, &AmlCode_ssdt, ssdt->length);
+ /* recalculate checksum */
+ ssdt->checksum = 0;
+ ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length);
+ }
+ acpi_add_table(rsdp,ssdt);
+
+ printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current);
#if DUMP_ACPI_TABLES == 1
- printk(BIOS_DEBUG, "rsdp\n");
- dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
+ printk(BIOS_DEBUG, "rsdp\n");
+ dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
- printk(BIOS_DEBUG, "rsdt\n");
- dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
+ printk(BIOS_DEBUG, "rsdt\n");
+ dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
- printk(BIOS_DEBUG, "madt\n");
- dump_mem(madt, ((void *)madt) + madt->header.length);
+ printk(BIOS_DEBUG, "madt\n");
+ dump_mem(madt, ((void *)madt) + madt->header.length);
- printk(BIOS_DEBUG, "srat\n");
- dump_mem(srat, ((void *)srat) + srat->header.length);
+ printk(BIOS_DEBUG, "srat\n");
+ dump_mem(srat, ((void *)srat) + srat->header.length);
- printk(BIOS_DEBUG, "slit\n");
- dump_mem(slit, ((void *)slit) + slit->header.length);
+ printk(BIOS_DEBUG, "slit\n");
+ dump_mem(slit, ((void *)slit) + slit->header.length);
- printk(BIOS_DEBUG, "ssdt\n");
- dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
+ printk(BIOS_DEBUG, "ssdt\n");
+ dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
- printk(BIOS_DEBUG, "fadt\n");
- dump_mem(fadt, ((void *)fadt) + fadt->header.length);
+ printk(BIOS_DEBUG, "fadt\n");
+ dump_mem(fadt, ((void *)fadt) + fadt->header.length);
#endif
- printk(BIOS_INFO, "ACPI: done.\n");
- return current;
+ printk(BIOS_INFO, "ACPI: done.\n");
+ return current;
}
diff --git a/src/mainboard/amd/persimmon/agesawrapper.c b/src/mainboard/amd/persimmon/agesawrapper.c
index 9d9f864141..89f171b079 100644
--- a/src/mainboard/amd/persimmon/agesawrapper.c
+++ b/src/mainboard/amd/persimmon/agesawrapper.c
@@ -9,16 +9,16 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*----------------------------------------------------------------------------------------
- * M O D U L E S U S E D
+ * M O D U L E S U S E D
*----------------------------------------------------------------------------------------
*/
@@ -41,501 +41,500 @@
#define FILECODE UNASSIGNED_FILE_FILECODE
/*----------------------------------------------------------------------------------------
- * D E F I N I T I O N S A N D M A C R O S
+ * D E F I N I T I O N S A N D M A C R O S
*----------------------------------------------------------------------------------------
*/
#define MMCONF_ENABLE 1
/* ACPI table pointers returned by AmdInitLate */
-VOID *DmiTable = NULL;
-VOID *AcpiPstate = NULL;
-VOID *AcpiSrat = NULL;
-VOID *AcpiSlit = NULL;
+VOID *DmiTable = NULL;
+VOID *AcpiPstate = NULL;
+VOID *AcpiSrat = NULL;
+VOID *AcpiSlit = NULL;
VOID *AcpiWheaMce = NULL;
VOID *AcpiWheaCmc = NULL;
-VOID *AcpiAlib = NULL;
+VOID *AcpiAlib = NULL;
/*----------------------------------------------------------------------------------------
- * T Y P E D E F S A N D S T R U C T U R E S
+ * T Y P E D E F S A N D S T R U C T U R E S
*----------------------------------------------------------------------------------------
*/
/*----------------------------------------------------------------------------------------
- * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
*----------------------------------------------------------------------------------------
*/
/*----------------------------------------------------------------------------------------
- * E X P O R T E D F U N C T I O N S
+ * E X P O R T E D F U N C T I O N S
*----------------------------------------------------------------------------------------
*/
/*---------------------------------------------------------------------------------------
- * L O C A L F U N C T I O N S
+ * L O C A L F U N C T I O N S
*---------------------------------------------------------------------------------------
*/
UINT32
agesawrapper_amdinitcpuio (
- VOID
- )
+ VOID
+ )
{
- AGESA_STATUS Status;
- UINT64 MsrReg;
- UINT32 PciData;
- PCI_ADDR PciAddress;
- AMD_CONFIG_PARAMS StdHeader;
-
- /* Enable legacy video routing: D18F1xF4 VGA Enable */
- PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4);
- PciData = 1;
- LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-
- /* The platform BIOS needs to ensure the memory ranges of SB800 legacy
- * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are
- * set to non-posted regions.
- */
- PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84);
- PciData = 0x00FEDF00; // last address before processor local APIC at FEE00000
- PciData |= 1 << 7; // set NP (non-posted) bit
- LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
- PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80);
- PciData = (0xFED00000 >> 8) | 3; // lowest NP address is HPET at FED00000
- LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-
- /* Map the remaining PCI hole as posted MMIO */
- PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C);
- PciData = 0x00FECF00; // last address before non-posted range
- LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
- LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader);
- MsrReg = (MsrReg >> 8) | 3;
- PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88);
- PciData = (UINT32)MsrReg;
- LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-
- /* Send all IO (0000-FFFF) to southbridge. */
- PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4);
- PciData = 0x0000F000;
- LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
- PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0);
- PciData = 0x00000003;
- LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
- Status = AGESA_SUCCESS;
- return (UINT32)Status;
+ AGESA_STATUS Status;
+ UINT64 MsrReg;
+ UINT32 PciData;
+ PCI_ADDR PciAddress;
+ AMD_CONFIG_PARAMS StdHeader;
+
+ /* Enable legacy video routing: D18F1xF4 VGA Enable */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4);
+ PciData = 1;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+ /* The platform BIOS needs to ensure the memory ranges of SB800 legacy
+ * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are
+ * set to non-posted regions.
+ */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84);
+ PciData = 0x00FEDF00; // last address before processor local APIC at FEE00000
+ PciData |= 1 << 7; // set NP (non-posted) bit
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80);
+ PciData = (0xFED00000 >> 8) | 3; // lowest NP address is HPET at FED00000
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+ /* Map the remaining PCI hole as posted MMIO */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C);
+ PciData = 0x00FECF00; // last address before non-posted range
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+ LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader);
+ MsrReg = (MsrReg >> 8) | 3;
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88);
+ PciData = (UINT32)MsrReg;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+ /* Send all IO (0000-FFFF) to southbridge. */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4);
+ PciData = 0x0000F000;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0);
+ PciData = 0x00000003;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+ Status = AGESA_SUCCESS;
+ return (UINT32)Status;
}
UINT32
agesawrapper_amdinitmmio (
- VOID
- )
+ VOID
+ )
{
- AGESA_STATUS Status;
- UINT64 MsrReg;
- UINT32 PciData;
- PCI_ADDR PciAddress;
- AMD_CONFIG_PARAMS StdHeader;
-
- UINT8 BusRangeVal = 0;
- UINT8 BusNum;
- UINT8 Index;
-
- /*
- Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base
- Address MSR register.
- */
-
- for (Index = 0; Index < 8; Index++) {
- BusNum = CONFIG_MMCONF_BUS_NUMBER >> Index;
- if (BusNum == 1) {
- BusRangeVal = Index;
- break;
- }
- }
-
- MsrReg = (CONFIG_MMCONF_BASE_ADDRESS | (UINT64)(BusRangeVal << 2) | MMCONF_ENABLE);
- LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader);
-
- /*
- Set the NB_CFG MSR register. Enable CF8 extended configuration cycles.
- */
- LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader);
- MsrReg = MsrReg | 0x0000400000000000ull;
- LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader);
-
- /* Set Ontario Link Data */
- PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE0);
- PciData = 0x01308002;
- LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
- PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE4);
- PciData = (AMD_APU_SSID<<0x10)|AMD_APU_SVID;
- LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
-
- Status = AGESA_SUCCESS;
- return (UINT32)Status;
+ AGESA_STATUS Status;
+ UINT64 MsrReg;
+ UINT32 PciData;
+ PCI_ADDR PciAddress;
+ AMD_CONFIG_PARAMS StdHeader;
+
+ UINT8 BusRangeVal = 0;
+ UINT8 BusNum;
+ UINT8 Index;
+
+ /*
+ Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base
+ Address MSR register.
+ */
+
+ for (Index = 0; Index < 8; Index++) {
+ BusNum = CONFIG_MMCONF_BUS_NUMBER >> Index;
+ if (BusNum == 1) {
+ BusRangeVal = Index;
+ break;
+ }
+ }
+
+ MsrReg = (CONFIG_MMCONF_BASE_ADDRESS | (UINT64)(BusRangeVal << 2) | MMCONF_ENABLE);
+ LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader);
+
+ /*
+ Set the NB_CFG MSR register. Enable CF8 extended configuration cycles.
+ */
+ LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader);
+ MsrReg = MsrReg | 0x0000400000000000ull;
+ LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader);
+
+ /* Set Ontario Link Data */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE0);
+ PciData = 0x01308002;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0, 0, 0xE4);
+ PciData = (AMD_APU_SSID<<0x10)|AMD_APU_SVID;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+ Status = AGESA_SUCCESS;
+ return (UINT32)Status;
}
UINT32
agesawrapper_amdinitreset (
- VOID
- )
+ VOID
+ )
{
- AGESA_STATUS status;
- AMD_INTERFACE_PARAMS AmdParamStruct;
- AMD_RESET_PARAMS AmdResetParams;
-
- LibAmdMemFill (&AmdParamStruct,
- 0,
- sizeof (AMD_INTERFACE_PARAMS),
- &(AmdParamStruct.StdHeader));
-
- LibAmdMemFill (&AmdResetParams,
- 0,
- sizeof (AMD_RESET_PARAMS),
- &(AmdResetParams.StdHeader));
-
- AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET;
- AmdParamStruct.AllocationMethod = ByHost;
- AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS);
- AmdParamStruct.NewStructPtr = &AmdResetParams;
- AmdParamStruct.StdHeader.AltImageBasePtr = 0;
- AmdParamStruct.StdHeader.CalloutPtr = NULL;
- AmdParamStruct.StdHeader.Func = 0;
- AmdParamStruct.StdHeader.ImageBasePtr = 0;
- AmdCreateStruct (&AmdParamStruct);
- AmdResetParams.HtConfig.Depth = 0;
-
- status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr);
- if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog();
- AmdReleaseStruct (&AmdParamStruct);
- return (UINT32)status;
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_RESET_PARAMS AmdResetParams;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ LibAmdMemFill (&AmdResetParams,
+ 0,
+ sizeof (AMD_RESET_PARAMS),
+ &(AmdResetParams.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET;
+ AmdParamStruct.AllocationMethod = ByHost;
+ AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS);
+ AmdParamStruct.NewStructPtr = &AmdResetParams;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = NULL;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+ AmdCreateStruct (&AmdParamStruct);
+ AmdResetParams.HtConfig.Depth = 0;
+
+ status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog();
+ AmdReleaseStruct (&AmdParamStruct);
+ return (UINT32)status;
}
UINT32
agesawrapper_amdinitearly (
- VOID
- )
+ VOID
+ )
{
- AGESA_STATUS status;
- AMD_INTERFACE_PARAMS AmdParamStruct;
- AMD_EARLY_PARAMS *AmdEarlyParamsPtr;
-
- LibAmdMemFill (&AmdParamStruct,
- 0,
- sizeof (AMD_INTERFACE_PARAMS),
- &(AmdParamStruct.StdHeader));
-
- AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY;
- AmdParamStruct.AllocationMethod = PreMemHeap;
- AmdParamStruct.StdHeader.AltImageBasePtr = 0;
- AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
- AmdParamStruct.StdHeader.Func = 0;
- AmdParamStruct.StdHeader.ImageBasePtr = 0;
- AmdCreateStruct (&AmdParamStruct);
-
- AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr;
- OemCustomizeInitEarly (AmdEarlyParamsPtr);
-
- status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr);
- if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog();
- AmdReleaseStruct (&AmdParamStruct);
-
- return (UINT32)status;
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_EARLY_PARAMS *AmdEarlyParamsPtr;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY;
+ AmdParamStruct.AllocationMethod = PreMemHeap;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+ AmdCreateStruct (&AmdParamStruct);
+
+ AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr;
+ OemCustomizeInitEarly (AmdEarlyParamsPtr);
+
+ status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog();
+ AmdReleaseStruct (&AmdParamStruct);
+
+ return (UINT32)status;
}
UINT32
agesawrapper_amdinitpost (
- VOID
- )
+ VOID
+ )
{
- AGESA_STATUS status;
- UINT16 i;
- UINT32 *HeadPtr;
- AMD_INTERFACE_PARAMS AmdParamStruct;
- BIOS_HEAP_MANAGER *BiosManagerPtr;
-
- LibAmdMemFill (&AmdParamStruct,
- 0,
- sizeof (AMD_INTERFACE_PARAMS),
- &(AmdParamStruct.StdHeader));
-
- AmdParamStruct.AgesaFunctionName = AMD_INIT_POST;
- AmdParamStruct.AllocationMethod = PreMemHeap;
- AmdParamStruct.StdHeader.AltImageBasePtr = 0;
- AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
- AmdParamStruct.StdHeader.Func = 0;
- AmdParamStruct.StdHeader.ImageBasePtr = 0;
-
- AmdCreateStruct (&AmdParamStruct);
- status = AmdInitPost ((AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr);
- if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog();
- AmdReleaseStruct (&AmdParamStruct);
-
- /* Initialize heap space */
- BiosManagerPtr = (BIOS_HEAP_MANAGER *)BIOS_HEAP_START_ADDRESS;
-
- HeadPtr = (UINT32 *) ((UINT8 *) BiosManagerPtr + sizeof (BIOS_HEAP_MANAGER));
- for (i = 0; i < ((BIOS_HEAP_SIZE/4) - (sizeof (BIOS_HEAP_MANAGER)/4)); i++)
- {
- *HeadPtr = 0x00000000;
- HeadPtr++;
- }
- BiosManagerPtr->StartOfAllocatedNodes = 0;
- BiosManagerPtr->StartOfFreedNodes = 0;
-
- return (UINT32)status;
+ AGESA_STATUS status;
+ UINT16 i;
+ UINT32 *HeadPtr;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ BIOS_HEAP_MANAGER *BiosManagerPtr;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_POST;
+ AmdParamStruct.AllocationMethod = PreMemHeap;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+ AmdCreateStruct (&AmdParamStruct);
+ status = AmdInitPost ((AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog();
+ AmdReleaseStruct (&AmdParamStruct);
+
+ /* Initialize heap space */
+ BiosManagerPtr = (BIOS_HEAP_MANAGER *)BIOS_HEAP_START_ADDRESS;
+
+ HeadPtr = (UINT32 *) ((UINT8 *) BiosManagerPtr + sizeof (BIOS_HEAP_MANAGER));
+ for (i = 0; i < ((BIOS_HEAP_SIZE/4) - (sizeof (BIOS_HEAP_MANAGER)/4)); i++) {
+ *HeadPtr = 0x00000000;
+ HeadPtr++;
+ }
+ BiosManagerPtr->StartOfAllocatedNodes = 0;
+ BiosManagerPtr->StartOfFreedNodes = 0;
+
+ return (UINT32)status;
}
UINT32
agesawrapper_amdinitenv (
- VOID
- )
+ VOID
+ )
{
- AGESA_STATUS status;
- AMD_INTERFACE_PARAMS AmdParamStruct;
- PCI_ADDR PciAddress;
- UINT32 PciValue;
-
- LibAmdMemFill (&AmdParamStruct,
- 0,
- sizeof (AMD_INTERFACE_PARAMS),
- &(AmdParamStruct.StdHeader));
-
- AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV;
- AmdParamStruct.AllocationMethod = PostMemDram;
- AmdParamStruct.StdHeader.AltImageBasePtr = 0;
- AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
- AmdParamStruct.StdHeader.Func = 0;
- AmdParamStruct.StdHeader.ImageBasePtr = 0;
- AmdCreateStruct (&AmdParamStruct);
- status = AmdInitEnv ((AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr);
- if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog();
- /* Initialize Subordinate Bus Number and Secondary Bus Number
- * In platform BIOS this address is allocated by PCI enumeration code
- Modify D1F0x18
- */
- PciAddress.Address.Bus = 0;
- PciAddress.Address.Device = 1;
- PciAddress.Address.Function = 0;
- PciAddress.Address.Register = 0x18;
- /* Write to D1F0x18 */
- LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
- PciValue |= 0x00010100;
- LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
-
- /* Initialize GMM Base Address for Legacy Bridge Mode
- * Modify B1D5F0x18
- */
- PciAddress.Address.Bus = 1;
- PciAddress.Address.Device = 5;
- PciAddress.Address.Function = 0;
- PciAddress.Address.Register = 0x18;
-
- LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
- PciValue |= 0x96000000;
- LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
-
- /* Initialize FB Base Address for Legacy Bridge Mode
- * Modify B1D5F0x10
- */
- PciAddress.Address.Register = 0x10;
- LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
- PciValue |= 0x80000000;
- LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
-
- /* Initialize GMM Base Address for Pcie Mode
- * Modify B0D1F0x18
- */
- PciAddress.Address.Bus = 0;
- PciAddress.Address.Device = 1;
- PciAddress.Address.Function = 0;
- PciAddress.Address.Register = 0x18;
-
- LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
- PciValue |= 0x96000000;
- LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
-
- /* Initialize FB Base Address for Pcie Mode
- * Modify B0D1F0x10
- */
- PciAddress.Address.Register = 0x10;
- LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
- PciValue |= 0x80000000;
- LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
-
- /* Initialize MMIO Base and Limit Address
- * Modify B0D1F0x20
- */
- PciAddress.Address.Bus = 0;
- PciAddress.Address.Device = 1;
- PciAddress.Address.Function = 0;
- PciAddress.Address.Register = 0x20;
-
- LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
- PciValue |= 0x96009600;
- LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
-
- /* Initialize MMIO Prefetchable Memory Limit and Base
- * Modify B0D1F0x24
- */
- PciAddress.Address.Register = 0x24;
- LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
- PciValue |= 0x8FF18001;
- LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
- AmdReleaseStruct (&AmdParamStruct);
-
- return (UINT32)status;
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ PCI_ADDR PciAddress;
+ UINT32 PciValue;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV;
+ AmdParamStruct.AllocationMethod = PostMemDram;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+ AmdCreateStruct (&AmdParamStruct);
+ status = AmdInitEnv ((AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog();
+ /* Initialize Subordinate Bus Number and Secondary Bus Number
+ * In platform BIOS this address is allocated by PCI enumeration code
+ Modify D1F0x18
+ */
+ PciAddress.Address.Bus = 0;
+ PciAddress.Address.Device = 1;
+ PciAddress.Address.Function = 0;
+ PciAddress.Address.Register = 0x18;
+ /* Write to D1F0x18 */
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
+ PciValue |= 0x00010100;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
+
+ /* Initialize GMM Base Address for Legacy Bridge Mode
+ * Modify B1D5F0x18
+ */
+ PciAddress.Address.Bus = 1;
+ PciAddress.Address.Device = 5;
+ PciAddress.Address.Function = 0;
+ PciAddress.Address.Register = 0x18;
+
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
+ PciValue |= 0x96000000;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
+
+ /* Initialize FB Base Address for Legacy Bridge Mode
+ * Modify B1D5F0x10
+ */
+ PciAddress.Address.Register = 0x10;
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
+ PciValue |= 0x80000000;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
+
+ /* Initialize GMM Base Address for Pcie Mode
+ * Modify B0D1F0x18
+ */
+ PciAddress.Address.Bus = 0;
+ PciAddress.Address.Device = 1;
+ PciAddress.Address.Function = 0;
+ PciAddress.Address.Register = 0x18;
+
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
+ PciValue |= 0x96000000;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
+
+ /* Initialize FB Base Address for Pcie Mode
+ * Modify B0D1F0x10
+ */
+ PciAddress.Address.Register = 0x10;
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
+ PciValue |= 0x80000000;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
+
+ /* Initialize MMIO Base and Limit Address
+ * Modify B0D1F0x20
+ */
+ PciAddress.Address.Bus = 0;
+ PciAddress.Address.Device = 1;
+ PciAddress.Address.Function = 0;
+ PciAddress.Address.Register = 0x20;
+
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
+ PciValue |= 0x96009600;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
+
+ /* Initialize MMIO Prefetchable Memory Limit and Base
+ * Modify B0D1F0x24
+ */
+ PciAddress.Address.Register = 0x24;
+ LibAmdPciRead (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
+ PciValue |= 0x8FF18001;
+ LibAmdPciWrite (AccessWidth32, PciAddress, &PciValue, &AmdParamStruct.StdHeader);
+ AmdReleaseStruct (&AmdParamStruct);
+
+ return (UINT32)status;
}
VOID *
agesawrapper_getlateinitptr (
- int pick
- )
+ int pick
+ )
{
- switch (pick) {
- case PICK_DMI:
- return DmiTable;
- case PICK_PSTATE:
- return AcpiPstate;
- case PICK_SRAT:
- return AcpiSrat;
- case PICK_SLIT:
- return AcpiSlit;
- case PICK_WHEA_MCE:
- return AcpiWheaMce;
- case PICK_WHEA_CMC:
- return AcpiWheaCmc;
- case PICK_ALIB:
- return AcpiAlib;
- default:
- return NULL;
- }
+ switch (pick) {
+ case PICK_DMI:
+ return DmiTable;
+ case PICK_PSTATE:
+ return AcpiPstate;
+ case PICK_SRAT:
+ return AcpiSrat;
+ case PICK_SLIT:
+ return AcpiSlit;
+ case PICK_WHEA_MCE:
+ return AcpiWheaMce;
+ case PICK_WHEA_CMC:
+ return AcpiWheaCmc;
+ case PICK_ALIB:
+ return AcpiAlib;
+ default:
+ return NULL;
+ }
}
UINT32
agesawrapper_amdinitmid (
- VOID
- )
+ VOID
+ )
{
- AGESA_STATUS status;
- AMD_INTERFACE_PARAMS AmdParamStruct;
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
- /* Enable MMIO on AMD CPU Address Map Controller */
- agesawrapper_amdinitcpuio ();
+ /* Enable MMIO on AMD CPU Address Map Controller */
+ agesawrapper_amdinitcpuio ();
- LibAmdMemFill (&AmdParamStruct,
- 0,
- sizeof (AMD_INTERFACE_PARAMS),
- &(AmdParamStruct.StdHeader));
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
- AmdParamStruct.AgesaFunctionName = AMD_INIT_MID;
- AmdParamStruct.AllocationMethod = PostMemDram;
- AmdParamStruct.StdHeader.AltImageBasePtr = 0;
- AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
- AmdParamStruct.StdHeader.Func = 0;
- AmdParamStruct.StdHeader.ImageBasePtr = 0;
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_MID;
+ AmdParamStruct.AllocationMethod = PostMemDram;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
- AmdCreateStruct (&AmdParamStruct);
+ AmdCreateStruct (&AmdParamStruct);
- status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr);
- if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog();
- AmdReleaseStruct (&AmdParamStruct);
+ status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog();
+ AmdReleaseStruct (&AmdParamStruct);
- return (UINT32)status;
+ return (UINT32)status;
}
UINT32
agesawrapper_amdinitlate (
- VOID
- )
+ VOID
+ )
{
- AGESA_STATUS Status;
- AMD_LATE_PARAMS AmdLateParams;
-
- LibAmdMemFill (&AmdLateParams,
- 0,
- sizeof (AMD_LATE_PARAMS),
- &(AmdLateParams.StdHeader));
-
- AmdLateParams.StdHeader.AltImageBasePtr = 0;
- AmdLateParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
- AmdLateParams.StdHeader.Func = 0;
- AmdLateParams.StdHeader.ImageBasePtr = 0;
-
- Status = AmdInitLate (&AmdLateParams);
- if (Status != AGESA_SUCCESS) {
- agesawrapper_amdreadeventlog();
- ASSERT(Status == AGESA_SUCCESS);
- }
-
- DmiTable = AmdLateParams.DmiTable;
- AcpiPstate = AmdLateParams.AcpiPState;
- AcpiSrat = AmdLateParams.AcpiSrat;
- AcpiSlit = AmdLateParams.AcpiSlit;
-
- AcpiWheaMce = AmdLateParams.AcpiWheaMce;
- AcpiWheaCmc = AmdLateParams.AcpiWheaCmc;
- AcpiAlib = AmdLateParams.AcpiAlib;
-
- return (UINT32)Status;
+ AGESA_STATUS Status;
+ AMD_LATE_PARAMS AmdLateParams;
+
+ LibAmdMemFill (&AmdLateParams,
+ 0,
+ sizeof (AMD_LATE_PARAMS),
+ &(AmdLateParams.StdHeader));
+
+ AmdLateParams.StdHeader.AltImageBasePtr = 0;
+ AmdLateParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdLateParams.StdHeader.Func = 0;
+ AmdLateParams.StdHeader.ImageBasePtr = 0;
+
+ Status = AmdInitLate (&AmdLateParams);
+ if (Status != AGESA_SUCCESS) {
+ agesawrapper_amdreadeventlog();
+ ASSERT(Status == AGESA_SUCCESS);
+ }
+
+ DmiTable = AmdLateParams.DmiTable;
+ AcpiPstate = AmdLateParams.AcpiPState;
+ AcpiSrat = AmdLateParams.AcpiSrat;
+ AcpiSlit = AmdLateParams.AcpiSlit;
+
+ AcpiWheaMce = AmdLateParams.AcpiWheaMce;
+ AcpiWheaCmc = AmdLateParams.AcpiWheaCmc;
+ AcpiAlib = AmdLateParams.AcpiAlib;
+
+ return (UINT32)Status;
}
UINT32
agesawrapper_amdlaterunaptask (
- UINT32 Func,
- UINT32 Data,
- VOID *ConfigPtr
- )
+ UINT32 Func,
+ UINT32 Data,
+ VOID *ConfigPtr
+ )
{
- AGESA_STATUS Status;
- AP_EXE_PARAMS ApExeParams;
-
- LibAmdMemFill (&ApExeParams,
- 0,
- sizeof (AP_EXE_PARAMS),
- &(ApExeParams.StdHeader));
-
- ApExeParams.StdHeader.AltImageBasePtr = 0;
- ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
- ApExeParams.StdHeader.Func = 0;
- ApExeParams.StdHeader.ImageBasePtr = 0;
- ApExeParams.StdHeader.ImageBasePtr = 0;
- ApExeParams.FunctionNumber = Func;
- ApExeParams.RelatedDataBlock = ConfigPtr;
-
- Status = AmdLateRunApTask (&ApExeParams);
- if (Status != AGESA_SUCCESS) {
- agesawrapper_amdreadeventlog();
- ASSERT(Status == AGESA_SUCCESS);
- }
-
- return (UINT32)Status;
+ AGESA_STATUS Status;
+ AP_EXE_PARAMS ApExeParams;
+
+ LibAmdMemFill (&ApExeParams,
+ 0,
+ sizeof (AP_EXE_PARAMS),
+ &(ApExeParams.StdHeader));
+
+ ApExeParams.StdHeader.AltImageBasePtr = 0;
+ ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ ApExeParams.StdHeader.Func = 0;
+ ApExeParams.StdHeader.ImageBasePtr = 0;
+ ApExeParams.StdHeader.ImageBasePtr = 0;
+ ApExeParams.FunctionNumber = Func;
+ ApExeParams.RelatedDataBlock = ConfigPtr;
+
+ Status = AmdLateRunApTask (&ApExeParams);
+ if (Status != AGESA_SUCCESS) {
+ agesawrapper_amdreadeventlog();
+ ASSERT(Status == AGESA_SUCCESS);
+ }
+
+ return (UINT32)Status;
}
UINT32
agesawrapper_amdreadeventlog (
- VOID
- )
+ VOID
+ )
{
- AGESA_STATUS Status;
- EVENT_PARAMS AmdEventParams;
-
- LibAmdMemFill (&AmdEventParams,
- 0,
- sizeof (EVENT_PARAMS),
- &(AmdEventParams.StdHeader));
-
- AmdEventParams.StdHeader.AltImageBasePtr = 0;
- AmdEventParams.StdHeader.CalloutPtr = NULL;
- AmdEventParams.StdHeader.Func = 0;
- AmdEventParams.StdHeader.ImageBasePtr = 0;
- Status = AmdReadEventLog (&AmdEventParams);
- while (AmdEventParams.EventClass != 0) {
- printk(BIOS_DEBUG,"\nEventLog: EventClass = %lx, EventInfo = %lx.\n",AmdEventParams.EventClass,AmdEventParams.EventInfo);
- printk(BIOS_DEBUG," Param1 = %lx, Param2 = %lx.\n",AmdEventParams.DataParam1,AmdEventParams.DataParam2);
- printk(BIOS_DEBUG," Param3 = %lx, Param4 = %lx.\n",AmdEventParams.DataParam3,AmdEventParams.DataParam4);
- Status = AmdReadEventLog (&AmdEventParams);
- }
-
- return (UINT32)Status;
+ AGESA_STATUS Status;
+ EVENT_PARAMS AmdEventParams;
+
+ LibAmdMemFill (&AmdEventParams,
+ 0,
+ sizeof (EVENT_PARAMS),
+ &(AmdEventParams.StdHeader));
+
+ AmdEventParams.StdHeader.AltImageBasePtr = 0;
+ AmdEventParams.StdHeader.CalloutPtr = NULL;
+ AmdEventParams.StdHeader.Func = 0;
+ AmdEventParams.StdHeader.ImageBasePtr = 0;
+ Status = AmdReadEventLog (&AmdEventParams);
+ while (AmdEventParams.EventClass != 0) {
+ printk(BIOS_DEBUG,"\nEventLog: EventClass = %lx, EventInfo = %lx.\n",AmdEventParams.EventClass,AmdEventParams.EventInfo);
+ printk(BIOS_DEBUG," Param1 = %lx, Param2 = %lx.\n",AmdEventParams.DataParam1,AmdEventParams.DataParam2);
+ printk(BIOS_DEBUG," Param3 = %lx, Param4 = %lx.\n",AmdEventParams.DataParam3,AmdEventParams.DataParam4);
+ Status = AmdReadEventLog (&AmdEventParams);
+ }
+
+ return (UINT32)Status;
}
diff --git a/src/mainboard/amd/persimmon/agesawrapper.h b/src/mainboard/amd/persimmon/agesawrapper.h
index f8d924eb60..7bed570e8c 100644
--- a/src/mainboard/amd/persimmon/agesawrapper.h
+++ b/src/mainboard/amd/persimmon/agesawrapper.h
@@ -9,16 +9,16 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*----------------------------------------------------------------------------------------
- * M O D U L E S U S E D
+ * M O D U L E S U S E D
*----------------------------------------------------------------------------------------
*/
@@ -30,46 +30,46 @@
#include "AGESA.h"
/*----------------------------------------------------------------------------------------
- * D E F I N I T I O N S A N D M A C R O S
+ * D E F I N I T I O N S A N D M A C R O S
*----------------------------------------------------------------------------------------
*/
/* Define AMD Ontario APPU SSID/SVID */
-#define AMD_APU_SVID 0x1022
-#define AMD_APU_SSID 0x1234
-#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS
+#define AMD_APU_SVID 0x1022
+#define AMD_APU_SSID 0x1234
+#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS
enum {
- PICK_DMI, /* DMI Interface */
- PICK_PSTATE, /* Acpi Pstate SSDT Table */
- PICK_SRAT, /* SRAT Table */
- PICK_SLIT, /* SLIT Table */
- PICK_WHEA_MCE, /* WHEA MCE table */
- PICK_WHEA_CMC, /* WHEA CMV table */
- PICK_ALIB, /* SACPI SSDT table with ALIB implementation */
+ PICK_DMI, /* DMI Interface */
+ PICK_PSTATE, /* Acpi Pstate SSDT Table */
+ PICK_SRAT, /* SRAT Table */
+ PICK_SLIT, /* SLIT Table */
+ PICK_WHEA_MCE, /* WHEA MCE table */
+ PICK_WHEA_CMC, /* WHEA CMV table */
+ PICK_ALIB, /* SACPI SSDT table with ALIB implementation */
};
/*----------------------------------------------------------------------------------------
- * T Y P E D E F S A N D S T R U C T U R E S
+ * T Y P E D E F S A N D S T R U C T U R E S
*----------------------------------------------------------------------------------------
*/
typedef struct {
- UINT32 CalloutName;
- AGESA_STATUS (*CalloutPtr) (UINT32 Func, UINT32 Data, VOID* ConfigPtr);
+ UINT32 CalloutName;
+ AGESA_STATUS (*CalloutPtr) (UINT32 Func, UINT32 Data, VOID* ConfigPtr);
} BIOS_CALLOUT_STRUCT;
/*----------------------------------------------------------------------------------------
- * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
*----------------------------------------------------------------------------------------
*/
/*----------------------------------------------------------------------------------------
- * E X P O R T E D F U N C T I O N S
+ * E X P O R T E D F U N C T I O N S
*----------------------------------------------------------------------------------------
*/
/*---------------------------------------------------------------------------------------
- * L O C A L F U N C T I O N S
+ * L O C A L F U N C T I O N S
*---------------------------------------------------------------------------------------
*/
diff --git a/src/mainboard/amd/persimmon/buildOpts.c b/src/mainboard/amd/persimmon/buildOpts.c
index 8025f4f91b..368eed2f10 100644
--- a/src/mainboard/amd/persimmon/buildOpts.c
+++ b/src/mainboard/amd/persimmon/buildOpts.c
@@ -9,12 +9,12 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/**
@@ -28,32 +28,32 @@
* For Information about this file, see @ref platforminstall.
*
* @xrefitem bom "File Content Label" "Release Content"
- * @e project: AGESA
- * @e sub-project: Core
- * @e \$Revision: 23714 $ @e \$Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $
+ * @e project: AGESA
+ * @e sub-project: Core
+ * @e \$Revision: 23714 $ @e \$Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $
*/
#include "Filecode.h"
#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE
-/* Select the cpu family. */
+/* Select the cpu family. */
#define INSTALL_FAMILY_10_SUPPORT FALSE
#define INSTALL_FAMILY_12_SUPPORT FALSE
#define INSTALL_FAMILY_14_SUPPORT TRUE
#define INSTALL_FAMILY_15_SUPPORT FALSE
-/* Select the cpu socket type. */
-#define INSTALL_G34_SOCKET_SUPPORT FALSE
-#define INSTALL_C32_SOCKET_SUPPORT FALSE
+/* Select the cpu socket type. */
+#define INSTALL_G34_SOCKET_SUPPORT FALSE
+#define INSTALL_C32_SOCKET_SUPPORT FALSE
#define INSTALL_S1G3_SOCKET_SUPPORT FALSE
#define INSTALL_S1G4_SOCKET_SUPPORT FALSE
#define INSTALL_ASB2_SOCKET_SUPPORT FALSE
-#define INSTALL_FS1_SOCKET_SUPPORT FALSE
-#define INSTALL_FM1_SOCKET_SUPPORT FALSE
-#define INSTALL_FP1_SOCKET_SUPPORT FALSE
-#define INSTALL_FT1_SOCKET_SUPPORT TRUE
-#define INSTALL_AM3_SOCKET_SUPPORT FALSE
+#define INSTALL_FS1_SOCKET_SUPPORT FALSE
+#define INSTALL_FM1_SOCKET_SUPPORT FALSE
+#define INSTALL_FP1_SOCKET_SUPPORT FALSE
+#define INSTALL_FT1_SOCKET_SUPPORT TRUE
+#define INSTALL_AM3_SOCKET_SUPPORT FALSE
/*
* Agesa optional capabilities selection.
@@ -61,163 +61,163 @@
* Comment out or mark TRUE those features you want to REMOVE from the build.
*/
-#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE
-#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE
-#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE
-#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE
-
-#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE
-#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE
-
-#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE
-#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE
-#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE
-#define BLDOPT_REMOVE_ECC_SUPPORT FALSE
-//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE
-#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE
-#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE
-#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE
-#define BLDOPT_REMOVE_DQS_TRAINING FALSE
-#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE
-#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE
-#define BLDOPT_REMOVE_ACPI_PSTATES FALSE
- #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE
- #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE
- #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE
- #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE
- #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE
- #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE
-#define BLDOPT_REMOVE_SRAT TRUE
-#define BLDOPT_REMOVE_SLIT TRUE
-#define BLDOPT_REMOVE_WHEA TRUE
-#define BLDOPT_REMOVE_DMI TRUE
-#define BLDOPT_REMOVE_HT_ASSIST TRUE
-#define BLDOPT_REMOVE_ATM_MODE TRUE
-//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE
-//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE
-#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE
-//#define BLDOPT_REMOVE_C6_STATE TRUE
-#define BLDOPT_REMOVE_GFX_RECOVERY TRUE
-#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE
+#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE
+#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE
+#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE
+#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE
+
+#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE
+#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE
+
+#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE
+#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE
+#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE
+#define BLDOPT_REMOVE_ECC_SUPPORT FALSE
+//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE
+#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE
+#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE
+#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE
+#define BLDOPT_REMOVE_DQS_TRAINING FALSE
+#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE
+#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_ACPI_PSTATES FALSE
+ #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE
+ #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE
+ #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE
+ #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE
+ #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE
+ #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE
+#define BLDOPT_REMOVE_SRAT TRUE
+#define BLDOPT_REMOVE_SLIT TRUE
+#define BLDOPT_REMOVE_WHEA TRUE
+#define BLDOPT_REMOVE_DMI TRUE
+#define BLDOPT_REMOVE_HT_ASSIST TRUE
+#define BLDOPT_REMOVE_ATM_MODE TRUE
+//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE
+//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE
+#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE
+//#define BLDOPT_REMOVE_C6_STATE TRUE
+#define BLDOPT_REMOVE_GFX_RECOVERY TRUE
+#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE
/*
* Agesa entry points used in this implementation.
*/
-#define AGESA_ENTRY_INIT_RESET TRUE
-#define AGESA_ENTRY_INIT_RECOVERY FALSE
-#define AGESA_ENTRY_INIT_EARLY TRUE
-#define AGESA_ENTRY_INIT_POST TRUE
-#define AGESA_ENTRY_INIT_ENV TRUE
-#define AGESA_ENTRY_INIT_MID TRUE
-#define AGESA_ENTRY_INIT_LATE TRUE
-#define AGESA_ENTRY_INIT_S3SAVE TRUE
-#define AGESA_ENTRY_INIT_RESUME TRUE
-#define AGESA_ENTRY_INIT_LATE_RESTORE FALSE
-#define AGESA_ENTRY_INIT_GENERAL_SERVICES FALSE
-
-#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS
-#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER
-
-#define BLDCFG_VRM_CURRENT_LIMIT 24000
-//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0
-#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000
-#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1
-#define BLDCFG_VRM_SLEW_RATE 5000
-//#define BLDCFG_VRM_NB_SLEW_RATE 5000
-//#define BLDCFG_VRM_ADDITIONAL_DELAY 0
-//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0
-#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE
-//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE
-#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000
-//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0
-
-//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C'
-//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0'
-//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE
-#define BLDCFG_PLAT_NUM_IO_APICS 3
-//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled
-//#define BLDCFG_PLATFORM_C1E_OPDATA 0
-//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0
-//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0
-#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6
-#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840
-#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840
-//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto
-#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST
-#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList
-#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE
-//#define BLDCFG_STARTING_BUSNUM 0
-//#define BLDCFG_MAXIMUM_BUSNUM 0xf8
-//#define BLDCFG_ALLOCATED_BUSNUMS 0x20
-//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0
-//#define BLDCFG_BUID_SWAP_LIST 0
-//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0
-//#define BLDCFG_HTFABRIC_LIMITS_LIST 0
-//#define BLDCFG_HTCHAIN_LIMITS_LIST 0
-//#define BLDCFG_BUS_NUMBERS_LIST 0
-//#define BLDCFG_IGNORE_LINK_LIST 0
-//#define BLDCFG_LINK_SKIP_REGANG_LIST 0
-//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0
-//#define BLDCFG_USE_HT_ASSIST TRUE
-//#define BLDCFG_USE_ATM_MODE TRUE
-//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm
-#define BLDCFG_S3_LATE_RESTORE FALSE
-//#define BLDCFG_USE_32_BYTE_REFRESH FALSE
-//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE
-//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance
-//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE
-//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE
-//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0
-#define BLDCFG_CFG_GNB_HD_AUDIO FALSE
-//#define BLDCFG_CFG_ABM_SUPPORT FALSE
-//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0
-//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0
-//#define BLDCFG_MEM_INIT_PSTATE 0
-//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0
-#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY
-#define BLDCFG_MEMORY_MODE_UNGANGED TRUE
-//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE
-//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
-#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE
-#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE
-#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE
-#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE
-#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE
-#define BLDCFG_MEMORY_POWER_DOWN TRUE
-#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT
-//#define BLDCFG_ONLINE_SPARE FALSE
-//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE
-#define BLDCFG_BANK_SWIZZLE TRUE
-#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO
-#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY
-#define BLDCFG_DQS_TRAINING_CONTROL TRUE
-#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE
-#define BLDCFG_USE_BURST_MODE FALSE
-#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE
-//#define BLDCFG_ENABLE_ECC_FEATURE TRUE
-//#define BLDCFG_ECC_REDIRECTION FALSE
-//#define BLDCFG_SCRUB_DRAM_RATE 0
-//#define BLDCFG_SCRUB_L2_RATE 0
-//#define BLDCFG_SCRUB_L3_RATE 0
-//#define BLDCFG_SCRUB_IC_RATE 0
-//#define BLDCFG_SCRUB_DC_RATE 0
-//#define BLDCFG_ECC_SYNC_FLOOD 0
-//#define BLDCFG_ECC_SYMBOL_SIZE 0
-//#define BLDCFG_1GB_ALIGN FALSE
-#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO
-#define BLDCFG_UMA_ALLOCATION_SIZE 0
-#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE
-#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED
-#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000
-#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000
+#define AGESA_ENTRY_INIT_RESET TRUE
+#define AGESA_ENTRY_INIT_RECOVERY FALSE
+#define AGESA_ENTRY_INIT_EARLY TRUE
+#define AGESA_ENTRY_INIT_POST TRUE
+#define AGESA_ENTRY_INIT_ENV TRUE
+#define AGESA_ENTRY_INIT_MID TRUE
+#define AGESA_ENTRY_INIT_LATE TRUE
+#define AGESA_ENTRY_INIT_S3SAVE TRUE
+#define AGESA_ENTRY_INIT_RESUME TRUE
+#define AGESA_ENTRY_INIT_LATE_RESTORE FALSE
+#define AGESA_ENTRY_INIT_GENERAL_SERVICES FALSE
+
+#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER
+
+#define BLDCFG_VRM_CURRENT_LIMIT 24000
+//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0
+#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000
+#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1
+#define BLDCFG_VRM_SLEW_RATE 5000
+//#define BLDCFG_VRM_NB_SLEW_RATE 5000
+//#define BLDCFG_VRM_ADDITIONAL_DELAY 0
+//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0
+#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE
+//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE
+#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000
+//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0
+
+//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C'
+//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0'
+//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE
+#define BLDCFG_PLAT_NUM_IO_APICS 3
+//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled
+//#define BLDCFG_PLATFORM_C1E_OPDATA 0
+//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0
+//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0
+#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6
+#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840
+#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840
+//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto
+#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST
+#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList
+#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE
+//#define BLDCFG_STARTING_BUSNUM 0
+//#define BLDCFG_MAXIMUM_BUSNUM 0xf8
+//#define BLDCFG_ALLOCATED_BUSNUMS 0x20
+//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0
+//#define BLDCFG_BUID_SWAP_LIST 0
+//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0
+//#define BLDCFG_HTFABRIC_LIMITS_LIST 0
+//#define BLDCFG_HTCHAIN_LIMITS_LIST 0
+//#define BLDCFG_BUS_NUMBERS_LIST 0
+//#define BLDCFG_IGNORE_LINK_LIST 0
+//#define BLDCFG_LINK_SKIP_REGANG_LIST 0
+//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0
+//#define BLDCFG_USE_HT_ASSIST TRUE
+//#define BLDCFG_USE_ATM_MODE TRUE
+//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm
+#define BLDCFG_S3_LATE_RESTORE FALSE
+//#define BLDCFG_USE_32_BYTE_REFRESH FALSE
+//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE
+//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance
+//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE
+//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE
+//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0
+#define BLDCFG_CFG_GNB_HD_AUDIO FALSE
+//#define BLDCFG_CFG_ABM_SUPPORT FALSE
+//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0
+//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0
+//#define BLDCFG_MEM_INIT_PSTATE 0
+//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0
+#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY
+#define BLDCFG_MEMORY_MODE_UNGANGED TRUE
+//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE
+//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
+#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE
+#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE
+#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE
+#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE
+#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE
+#define BLDCFG_MEMORY_POWER_DOWN TRUE
+#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT
+//#define BLDCFG_ONLINE_SPARE FALSE
+//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE
+#define BLDCFG_BANK_SWIZZLE TRUE
+#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO
+#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY
+#define BLDCFG_DQS_TRAINING_CONTROL TRUE
+#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE
+#define BLDCFG_USE_BURST_MODE FALSE
+#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE
+//#define BLDCFG_ENABLE_ECC_FEATURE TRUE
+//#define BLDCFG_ECC_REDIRECTION FALSE
+//#define BLDCFG_SCRUB_DRAM_RATE 0
+//#define BLDCFG_SCRUB_L2_RATE 0
+//#define BLDCFG_SCRUB_L3_RATE 0
+//#define BLDCFG_SCRUB_IC_RATE 0
+//#define BLDCFG_SCRUB_DC_RATE 0
+//#define BLDCFG_ECC_SYNC_FLOOD 0
+//#define BLDCFG_ECC_SYMBOL_SIZE 0
+//#define BLDCFG_1GB_ALIGN FALSE
+#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO
+#define BLDCFG_UMA_ALLOCATION_SIZE 0
+#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE
+#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED
+#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000
+#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000
/*
* Agesa configuration values selection.
@@ -230,21 +230,21 @@
/* The fixed MTRR values to be set after memory initialization. */
CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] =
{
- { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull },
- { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull },
- { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull },
- { CPU_LIST_TERMINAL }
+ { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull },
+ { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull },
+ { CPU_LIST_TERMINAL }
};
-/* Include the files that instantiate the configuration definitions. */
+/* Include the files that instantiate the configuration definitions. */
#include "cpuRegisters.h"
#include "cpuFamRegisters.h"
@@ -259,7 +259,7 @@ CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] =
#include "GnbInterface.h"
/*****************************************************************************
- * Define the RELEASE VERSION string
+ * Define the RELEASE VERSION string
*
* The Release Version string should identify the next planned release.
* When a branch is made in preparation for a release, the release manager
@@ -271,123 +271,123 @@ CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] =
* version string as appropriate for the release. The trunk copy of this file
* should also be updated/incremented for the next expected version, + trailing 'X'
****************************************************************************/
- // This is the delivery package title, "BrazosPI"
- // This string MUST be exactly 8 characters long
-#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'}
+// This is the delivery package title, "BrazosPI"
+// This string MUST be exactly 8 characters long
+#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'}
- // This is the release version number of the AGESA component
- // This string MUST be exactly 12 characters long
-#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '}
+// This is the release version number of the AGESA component
+// This string MUST be exactly 12 characters long
+#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '}
/* MEMORY_BUS_SPEED */
-#define DDR400_FREQUENCY 200 ///< DDR 400
-#define DDR533_FREQUENCY 266 ///< DDR 533
-#define DDR667_FREQUENCY 333 ///< DDR 667
-#define DDR800_FREQUENCY 400 ///< DDR 800
-#define DDR1066_FREQUENCY 533 ///< DDR 1066
-#define DDR1333_FREQUENCY 667 ///< DDR 1333
-#define DDR1600_FREQUENCY 800 ///< DDR 1600
-#define DDR1866_FREQUENCY 933 ///< DDR 1866
-#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency
+#define DDR400_FREQUENCY 200 ///< DDR 400
+#define DDR533_FREQUENCY 266 ///< DDR 533
+#define DDR667_FREQUENCY 333 ///< DDR 667
+#define DDR800_FREQUENCY 400 ///< DDR 800
+#define DDR1066_FREQUENCY 533 ///< DDR 1066
+#define DDR1333_FREQUENCY 667 ///< DDR 1333
+#define DDR1600_FREQUENCY 800 ///< DDR 1600
+#define DDR1866_FREQUENCY 933 ///< DDR 1866
+#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency
/* QUANDRANK_TYPE*/
-#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM
-#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM
+#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM
+#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM
/* USER_MEMORY_TIMING_MODE */
-#define TIMING_MODE_AUTO 0 ///< Use best rate possible
-#define TIMING_MODE_LIMITED 1 ///< Set user top limit
-#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed
+#define TIMING_MODE_AUTO 0 ///< Use best rate possible
+#define TIMING_MODE_LIMITED 1 ///< Set user top limit
+#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed
/* POWER_DOWN_MODE */
-#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode
-#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode
+#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode
+#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode
// The following definitions specify the default values for various parameters in which there are
-// no clearly defined defaults to be used in the common file. The values below are based on product
+// no clearly defined defaults to be used in the common file. The values below are based on product
// and BKDG content, please consult the AGESA Memory team for consultation.
-#define DFLT_SCRUB_DRAM_RATE (0)
-#define DFLT_SCRUB_L2_RATE (0)
-#define DFLT_SCRUB_L3_RATE (0)
-#define DFLT_SCRUB_IC_RATE (0)
-#define DFLT_SCRUB_DC_RATE (0)
-#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
-#define DFLT_VRM_SLEW_RATE (5000)
+#define DFLT_SCRUB_DRAM_RATE (0)
+#define DFLT_SCRUB_L2_RATE (0)
+#define DFLT_SCRUB_L3_RATE (0)
+#define DFLT_SCRUB_IC_RATE (0)
+#define DFLT_SCRUB_DC_RATE (0)
+#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
+#define DFLT_VRM_SLEW_RATE (5000)
// Instantiate all solution relevant data.
#include "PlatformInstall.h"
/*----------------------------------------------------------------------------------------
- * CUSTOMER OVERIDES MEMORY TABLE
+ * CUSTOMER OVERIDES MEMORY TABLE
*----------------------------------------------------------------------------------------
*/
/*
- * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
- * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
- * is populated, AGESA will base its settings on the data from the table. Otherwise, it will
- * use its default conservative settings.
+ * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
+ * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
+ * is populated, AGESA will base its settings on the data from the table. Otherwise, it will
+ * use its default conservative settings.
*/
CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
- //
- // The following macros are supported (use comma to separate macros):
- //
- // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap)
- // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap.
- // AGESA will base on this value to disable unused MemClk to save power.
- // Example:
- // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below:
- // Bit AM3/S1g3 pin name
- // 0 M[B,A]_CLK_H/L[0]
- // 1 M[B,A]_CLK_H/L[1]
- // 2 M[B,A]_CLK_H/L[2]
- // 3 M[B,A]_CLK_H/L[3]
- // 4 M[B,A]_CLK_H/L[4]
- // 5 M[B,A]_CLK_H/L[5]
- // 6 M[B,A]_CLK_H/L[6]
- // 7 M[B,A]_CLK_H/L[7]
- // And platform has the following routing:
- // CS0 M[B,A]_CLK_H/L[4]
- // CS1 M[B,A]_CLK_H/L[2]
- // CS2 M[B,A]_CLK_H/L[3]
- // CS3 M[B,A]_CLK_H/L[5]
- // Then platform can specify the following macro:
- // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00)
- //
- // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap)
- // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap.
- // AGESA will base on this value to tristate unused CKE to save power.
- //
- // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap)
- // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap.
- // AGESA will base on this value to tristate unused ODT pins to save power.
- //
- // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap)
- // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap.
- // AGESA will base on this value to tristate unused Chip select to save power.
- //
- // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel)
- // Specifies the number of DIMM slots per channel.
- //
- // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel)
- // Specifies the number of Chip selects per channel.
- //
- // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket)
- // Specifies the number of channels per socket.
- //
- // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED)
- // Specifies DDR bus speed of channel ChannelID on socket SocketID.
- //
- // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE)
- // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...)
- //
- // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
- // Byte6Seed, Byte7Seed, ByteEccSeed)
- // Specifies the write leveling seed for a channel of a socket.
- //
- NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2),
- NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1),
- PSO_END
+ //
+ // The following macros are supported (use comma to separate macros):
+ //
+ // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap)
+ // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap.
+ // AGESA will base on this value to disable unused MemClk to save power.
+ // Example:
+ // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below:
+ // Bit AM3/S1g3 pin name
+ // 0 M[B,A]_CLK_H/L[0]
+ // 1 M[B,A]_CLK_H/L[1]
+ // 2 M[B,A]_CLK_H/L[2]
+ // 3 M[B,A]_CLK_H/L[3]
+ // 4 M[B,A]_CLK_H/L[4]
+ // 5 M[B,A]_CLK_H/L[5]
+ // 6 M[B,A]_CLK_H/L[6]
+ // 7 M[B,A]_CLK_H/L[7]
+ // And platform has the following routing:
+ // CS0 M[B,A]_CLK_H/L[4]
+ // CS1 M[B,A]_CLK_H/L[2]
+ // CS2 M[B,A]_CLK_H/L[3]
+ // CS3 M[B,A]_CLK_H/L[5]
+ // Then platform can specify the following macro:
+ // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00)
+ //
+ // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap)
+ // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap.
+ // AGESA will base on this value to tristate unused CKE to save power.
+ //
+ // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap)
+ // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap.
+ // AGESA will base on this value to tristate unused ODT pins to save power.
+ //
+ // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap)
+ // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap.
+ // AGESA will base on this value to tristate unused Chip select to save power.
+ //
+ // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel)
+ // Specifies the number of DIMM slots per channel.
+ //
+ // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel)
+ // Specifies the number of Chip selects per channel.
+ //
+ // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket)
+ // Specifies the number of channels per socket.
+ //
+ // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED)
+ // Specifies DDR bus speed of channel ChannelID on socket SocketID.
+ //
+ // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE)
+ // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...)
+ //
+ // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
+ // Byte6Seed, Byte7Seed, ByteEccSeed)
+ // Specifies the write leveling seed for a channel of a socket.
+ //
+ NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2),
+ NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1),
+ PSO_END
};
/*
@@ -405,13 +405,13 @@ CONST UINT8 AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] =
//
// DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
//
- // NOTE:
- // The following training hardcode values are example values that were taken from a tilapia motherboard
- // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in
- // the table and replace the byte lane values with your own.
+ // NOTE:
+ // The following training hardcode values are example values that were taken from a tilapia motherboard
+ // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in
+ // the table and replace the byte lane values with your own.
//
- // ------------------ BYTE LANES ----------------------
- // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC
+ // ------------------ BYTE LANES ----------------------
+ // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC
// Write Data Timing
// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
@@ -437,22 +437,22 @@ CONST UINT8 AGESA_MEM_TABLE_ON[][sizeof (MEM_TABLE_ALIAS)] =
// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
//--------------------------------------------------------------------------------------------------------------------------------------------------
// TABLE END
- NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table
+ NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table
};
CONST UINT8 SizeOfTableON = sizeof (AGESA_MEM_TABLE_ON) / sizeof (AGESA_MEM_TABLE_ON[0]);
/* ***************************************************************************
- * Optional User code to be included into the AGESA build
- * These may be 32-bit call-out routines...
+ * Optional User code to be included into the AGESA build
+ * These may be 32-bit call-out routines...
*/
//AGESA_STATUS
//AgesaReadSpd (
-// IN UINTN FcnData,
-// IN OUT AGESA_READ_SPD_PARAMS *ReadSpd
-// )
+// IN UINTN FcnData,
+// IN OUT AGESA_READ_SPD_PARAMS *ReadSpd
+// )
//{
-// /* platform code to read an SPD... */
-// return Status;
+// /* platform code to read an SPD... */
+// return Status;
//}
diff --git a/src/mainboard/amd/persimmon/cmos.layout b/src/mainboard/amd/persimmon/cmos.layout
index 8315401c7b..3b98cbb6a1 100644
--- a/src/mainboard/amd/persimmon/cmos.layout
+++ b/src/mainboard/amd/persimmon/cmos.layout
@@ -1,18 +1,18 @@
#*****************************************************************************
-#
+#
# This file is part of the coreboot project.
-#
+#
# Copyright (C) 2011 Advanced Micro Devices, Inc.
-#
+#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
diff --git a/src/mainboard/amd/persimmon/devicetree.cb b/src/mainboard/amd/persimmon/devicetree.cb
index b47e6b9892..e5bbca2b46 100644
--- a/src/mainboard/amd/persimmon/devicetree.cb
+++ b/src/mainboard/amd/persimmon/devicetree.cb
@@ -17,92 +17,91 @@
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
chip northbridge/amd/agesa/family14/root_complex
- device lapic_cluster 0 on
- chip cpu/amd/agesa/family14
- device lapic 0 on end
- end
- end
- device pci_domain 0 on
- subsystemid 0x1022 0x1510 inherit
- chip northbridge/amd/agesa/family14 # CPU side of HT root complex
-# device pci 18.0 on # northbridge
- chip northbridge/amd/agesa/family14 # PCI side of HT root complex
- device pci 0.0 on end # Root Complex
- device pci 1.0 on end # Internal Graphics P2P bridge 0x9804
- device pci 1.1 on end # Internal Multimedia
- device pci 4.0 on end # PCIE P2P bridge 0x9604
- device pci 5.0 off end # PCIE P2P bridge 0x9605
- device pci 6.0 off end # PCIE P2P bridge 0x9606
- device pci 7.0 off end # PCIE P2P bridge 0x9607
- device pci 8.0 off end # NB/SB Link P2P bridge
- end # agesa northbridge
+ device lapic_cluster 0 on
+ chip cpu/amd/agesa/family14
+ device lapic 0 on end
+ end
+ end
+ device pci_domain 0 on
+ subsystemid 0x1022 0x1510 inherit
+ chip northbridge/amd/agesa/family14 # CPU side of HT root complex
+# device pci 18.0 on # northbridge
+ chip northbridge/amd/agesa/family14 # PCI side of HT root complex
+ device pci 0.0 on end # Root Complex
+ device pci 1.0 on end # Internal Graphics P2P bridge 0x9804
+ device pci 1.1 on end # Internal Multimedia
+ device pci 4.0 on end # PCIE P2P bridge 0x9604
+ device pci 5.0 off end # PCIE P2P bridge 0x9605
+ device pci 6.0 off end # PCIE P2P bridge 0x9606
+ device pci 7.0 off end # PCIE P2P bridge 0x9607
+ device pci 8.0 off end # NB/SB Link P2P bridge
+ end # agesa northbridge
- chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus
- device pci 11.0 on end # SATA
- device pci 12.0 on end # USB
- device pci 12.1 on end # USB
- device pci 12.2 on end # USB
- device pci 13.0 on end # USB
- device pci 13.1 on end # USB
- device pci 13.2 on end # USB
- device pci 14.0 on # SM
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- end # SM
- device pci 14.1 on end # IDE 0x439c
- device pci 14.2 on end # HDA 0x4383
- device pci 14.3 on # LPC 0x439d
- chip superio/fintek/f81865f
- device pnp 4e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 4e.3 off end # Parallel Port
- device pnp 4e.4 off end # Hardware Monitor
- device pnp 4e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 4e.6 off end # GPIO
- device pnp 4e.a off end # PME
- device pnp 4e.10 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 4e.11 off # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- end # f81865f
- end #LPC
- device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}
- device pci 14.5 on end # USB 2
- device pci 15.0 off end # PCIe PortA
- device pci 15.1 off end # PCIe PortB
- device pci 15.2 off end # PCIe PortC
- device pci 15.3 off end # PCIe PortD
- device pci 16.0 off end # OHCI USB3
- device pci 16.2 off end # EHCI USB3
- register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow)
- register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
- end #southbridge/amd/cimx/sb800
-# end # device pci 18.0
+ chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus
+ device pci 11.0 on end # SATA
+ device pci 12.0 on end # USB
+ device pci 12.1 on end # USB
+ device pci 12.2 on end # USB
+ device pci 13.0 on end # USB
+ device pci 13.1 on end # USB
+ device pci 13.2 on end # USB
+ device pci 14.0 on # SM
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ end # SM
+ device pci 14.1 on end # IDE 0x439c
+ device pci 14.2 on end # HDA 0x4383
+ device pci 14.3 on # LPC 0x439d
+ chip superio/fintek/f81865f
+ device pnp 4e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 4e.3 off end # Parallel Port
+ device pnp 4e.4 off end # Hardware Monitor
+ device pnp 4e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end
+ device pnp 4e.6 off end # GPIO
+ device pnp 4e.a off end # PME
+ device pnp 4e.10 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 4e.11 off # COM2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ end # f81865f
+ end #LPC
+ device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}
+ device pci 14.5 on end # USB 2
+ device pci 15.0 off end # PCIe PortA
+ device pci 15.1 off end # PCIe PortB
+ device pci 15.2 off end # PCIe PortC
+ device pci 15.3 off end # PCIe PortD
+ device pci 16.0 off end # OHCI USB3
+ device pci 16.2 off end # EHCI USB3
+ register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow)
+ register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
+ end #southbridge/amd/cimx/sb800
+# end # device pci 18.0
# These seem unnecessary
- device pci 18.0 on end
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- device pci 18.4 on end
- device pci 18.5 on end
- device pci 18.6 on end
- device pci 18.7 on end
- end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex
- end #pci_domain
+ device pci 18.0 on end
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ device pci 18.4 on end
+ device pci 18.5 on end
+ device pci 18.6 on end
+ device pci 18.7 on end
+ end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex
+ end #pci_domain
end #northbridge/amd/agesa/family14/root_complex
-
diff --git a/src/mainboard/amd/persimmon/dimmSpd.c b/src/mainboard/amd/persimmon/dimmSpd.c
index 2bd27d6f42..1343ae94e2 100644
--- a/src/mainboard/amd/persimmon/dimmSpd.c
+++ b/src/mainboard/amd/persimmon/dimmSpd.c
@@ -9,12 +9,12 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "Porting.h"
@@ -30,19 +30,19 @@ AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PA
* SPD address table - porting required
*/
-static const UINT8 spdAddressLookup [2] [2] [4] = // socket, channel, dimm
- {
- // socket 0
- {
- {0xA0, 0xA2}, // channel 0 dimms
- {0x00, 0x00}, // channel 1 dimms
- },
- // socket 1
- {
- {0x00, 0x00}, // channel 0 dimms
- {0x00, 0x00}, // channel 1 dimms
- },
- };
+static const UINT8 spdAddressLookup [2] [2] [4] = // socket, channel, dimm
+{
+// socket 0
+ {
+ {0xA0, 0xA2}, // channel 0 dimms
+ {0x00, 0x00}, // channel 1 dimms
+ },
+ // socket 1
+ {
+ {0x00, 0x00}, // channel 0 dimms
+ {0x00, 0x00}, // channel 1 dimms
+ },
+};
/*-----------------------------------------------------------------------------
*
@@ -50,117 +50,114 @@ static const UINT8 spdAddressLookup [2] [2] [4] = // socket, channel, dimm
*/
static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
- {
- unsigned int status;
- UINT64 limit;
-
- address |= 1; // set read bit
-
- __outbyte (iobase + 0, 0xFF); // clear error status
- __outbyte (iobase + 1, 0x1F); // clear error status
- __outbyte (iobase + 3, offset); // offset in eeprom
- __outbyte (iobase + 4, address); // slave address and read bit
- __outbyte (iobase + 2, 0x48); // read byte command
-
- // time limit to avoid hanging for unexpected error status (should never happen)
- limit = __rdtsc () + 2000000000 / 10;
- for (;;)
- {
- status = __inbyte (iobase);
- if (__rdtsc () > limit) break;
- if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
- if ((status & 1) == 1) continue; // HostBusy set, keep waiting
- break;
- }
-
- buffer [0] = __inbyte (iobase + 5);
- if (status == 2) status = 0; // check for done with no errors
- return status;
- }
+{
+ unsigned int status;
+ UINT64 limit;
+
+ address |= 1; // set read bit
+
+ __outbyte (iobase + 0, 0xFF); // clear error status
+ __outbyte (iobase + 1, 0x1F); // clear error status
+ __outbyte (iobase + 3, offset); // offset in eeprom
+ __outbyte (iobase + 4, address); // slave address and read bit
+ __outbyte (iobase + 2, 0x48); // read byte command
+
+ // time limit to avoid hanging for unexpected error status (should never happen)
+ limit = __rdtsc () + 2000000000 / 10;
+ for (;;) {
+ status = __inbyte (iobase);
+ if (__rdtsc () > limit) break;
+ if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
+ if ((status & 1) == 1) continue; // HostBusy set, keep waiting
+ break;
+ }
+
+ buffer [0] = __inbyte (iobase + 5);
+ if (status == 2) status = 0; // check for done with no errors
+ return status;
+}
/*-----------------------------------------------------------------------------
*
* readSmbusByte - read a single SPD byte from the default offset
- * this function is faster function readSmbusByteData
+ * this function is faster function readSmbusByteData
*/
static int readSmbusByte (int iobase, int address, char *buffer)
- {
- unsigned int status;
- UINT64 limit;
-
- __outbyte (iobase + 0, 0xFF); // clear error status
- __outbyte (iobase + 2, 0x44); // read command
-
- // time limit to avoid hanging for unexpected error status
- limit = __rdtsc () + 2000000000 / 10;
- for (;;)
- {
- status = __inbyte (iobase);
- if (__rdtsc () > limit) break;
- if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
- if ((status & 1) == 1) continue; // HostBusy set, keep waiting
- break;
- }
-
- buffer [0] = __inbyte (iobase + 5);
- if (status == 2) status = 0; // check for done with no errors
- return status;
- }
+{
+ unsigned int status;
+ UINT64 limit;
+
+ __outbyte (iobase + 0, 0xFF); // clear error status
+ __outbyte (iobase + 2, 0x44); // read command
+
+ // time limit to avoid hanging for unexpected error status
+ limit = __rdtsc () + 2000000000 / 10;
+ for (;;) {
+ status = __inbyte (iobase);
+ if (__rdtsc () > limit) break;
+ if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
+ if ((status & 1) == 1) continue; // HostBusy set, keep waiting
+ break;
+ }
+
+ buffer [0] = __inbyte (iobase + 5);
+ if (status == 2) status = 0; // check for done with no errors
+ return status;
+}
/*---------------------------------------------------------------------------
*
* readspd - Read one or more SPD bytes from a DIMM.
- * Start with offset zero and read sequentially.
- * Optimization relies on autoincrement to avoid
- * sending offset for every byte.
- * Reads 128 bytes in 7-8 ms at 400 KHz.
+ * Start with offset zero and read sequentially.
+ * Optimization relies on autoincrement to avoid
+ * sending offset for every byte.
+ * Reads 128 bytes in 7-8 ms at 400 KHz.
*/
static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
- {
- int index, error;
+{
+ int index, error;
- /* read the first byte using offset zero */
- error = readSmbusByteData (iobase, SmbusSlaveAddress, buffer, 0);
- if (error) return error;
+ /* read the first byte using offset zero */
+ error = readSmbusByteData (iobase, SmbusSlaveAddress, buffer, 0);
+ if (error) return error;
- /* read the remaining bytes using auto-increment for speed */
- for (index = 1; index < count; index++)
- {
- error = readSmbusByte (iobase, SmbusSlaveAddress, &buffer [index]);
- if (error) return error;
- }
+ /* read the remaining bytes using auto-increment for speed */
+ for (index = 1; index < count; index++) {
+ error = readSmbusByte (iobase, SmbusSlaveAddress, &buffer [index]);
+ if (error) return error;
+ }
- return 0;
- }
+ return 0;
+}
static void writePmReg (int reg, int data)
- {
- __outbyte (0xCD6, reg);
- __outbyte (0xCD7, data);
- }
+ {
+ __outbyte (0xCD6, reg);
+ __outbyte (0xCD7, data);
+ }
static void setupFch (int ioBase)
- {
- writePmReg (0x2D, ioBase >> 8);
- writePmReg (0x2C, ioBase | 1);
- writePmReg (0x29, 0x80);
- writePmReg (0x28, 0x61);
- __outbyte (ioBase + 0x0E, 66000000 / 400000 / 4); // set SMBus clock to 400 KHz
- }
+{
+ writePmReg (0x2D, ioBase >> 8);
+ writePmReg (0x2C, ioBase | 1);
+ writePmReg (0x29, 0x80);
+ writePmReg (0x28, 0x61);
+ __outbyte (ioBase + 0x0E, 66000000 / 400000 / 4); // set SMBus clock to 400 KHz
+}
AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info)
- {
- int spdAddress, ioBase;
-
- if (info->SocketId >= DIMENSION (spdAddressLookup )) return AGESA_ERROR;
- if (info->MemChannelId >= DIMENSION (spdAddressLookup[0] )) return AGESA_ERROR;
- if (info->DimmId >= DIMENSION (spdAddressLookup[0][0])) return AGESA_ERROR;
-
- spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId];
- if (spdAddress == 0) return AGESA_ERROR;
- ioBase = 0xB00;
- setupFch (ioBase);
- return readspd (ioBase, spdAddress, (void *) info->Buffer, 128);
- }
+{
+ int spdAddress, ioBase;
+
+ if (info->SocketId >= DIMENSION (spdAddressLookup )) return AGESA_ERROR;
+ if (info->MemChannelId >= DIMENSION (spdAddressLookup[0] )) return AGESA_ERROR;
+ if (info->DimmId >= DIMENSION (spdAddressLookup[0][0])) return AGESA_ERROR;
+
+ spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId];
+ if (spdAddress == 0) return AGESA_ERROR;
+ ioBase = 0xB00;
+ setupFch (ioBase);
+ return readspd (ioBase, spdAddress, (void *) info->Buffer, 128);
+}
diff --git a/src/mainboard/amd/persimmon/dimmSpd.h b/src/mainboard/amd/persimmon/dimmSpd.h
index 069c34a6fc..caaefbeab8 100644
--- a/src/mainboard/amd/persimmon/dimmSpd.h
+++ b/src/mainboard/amd/persimmon/dimmSpd.h
@@ -50,10 +50,10 @@
AGESA_STATUS
AmdMemoryReadSPD (
- IN UINT32 Func,
- IN UINT32 Data,
- IN OUT AGESA_READ_SPD_PARAMS *SpdData
- );
+ IN UINT32 Func,
+ IN UINT32 Data,
+ IN OUT AGESA_READ_SPD_PARAMS *SpdData
+ );
/*---------------------------------------------------------------------------------------
* L O C A L F U N C T I O N S
diff --git a/src/mainboard/amd/persimmon/get_bus_conf.c b/src/mainboard/amd/persimmon/get_bus_conf.c
index 2d28023574..0142762c0a 100644
--- a/src/mainboard/amd/persimmon/get_bus_conf.c
+++ b/src/mainboard/amd/persimmon/get_bus_conf.c
@@ -9,12 +9,12 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
@@ -43,7 +43,7 @@ u32 apicid_sb800;
* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
*/
u32 pci1234x[] = {
- 0x0000ff0,
+ 0x0000ff0,
};
u32 bus_type[256];
@@ -54,83 +54,80 @@ static u32 get_bus_conf_done = 0;
void get_bus_conf(void)
{
- u32 apicid_base;
- u32 status;
+ u32 apicid_base;
+ u32 status;
- device_t dev;
- int i, j;
+ device_t dev;
+ int i, j;
- if (get_bus_conf_done == 1)
- return; /* do it only once */
+ if (get_bus_conf_done == 1)
+ return; /* do it only once */
- get_bus_conf_done = 1;
+ get_bus_conf_done = 1;
/*
- * This is the call to AmdInitLate. It is really in the wrong place, conceptually,
+ * This is the call to AmdInitLate. It is really in the wrong place, conceptually,
* but functionally within the coreboot model, this is the best place to make the
- * call. The logically correct place to call AmdInitLate is after PCI scan is done,
+ * call. The logically correct place to call AmdInitLate is after PCI scan is done,
* after the decision about S3 resume is made, and before the system tables are
- * written into RAM. The routine that is responsible for writing the tables is
- * "write_tables", called near the end of "hardwaremain". There is no platform
+ * written into RAM. The routine that is responsible for writing the tables is
+ * "write_tables", called near the end of "hardwaremain". There is no platform
* specific entry point between the S3 resume decision point and the call to
* "write_tables", and the next platform specific entry points are the calls to
- * the ACPI table write functions. The first of ose would seem to be the right
+ * the ACPI table write functions. The first of ose would seem to be the right
* place, but other table write functions, e.g. the PIRQ table write function, are
- * called before the ACPI tables are written. This routine is called at the beginning
+ * called before the ACPI tables are written. This routine is called at the beginning
* of each of the write functions called prior to the ACPI write functions, so this
* becomes the best place for this call.
*/
- status = agesawrapper_amdinitlate();
- if(status) {
- printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
- }
-
- sbdn_sb800 = 0;
-
- for (i = 0; i < 3; i++) {
- bus_sb800[i] = 0;
- }
-
- for (i = 0; i < 256; i++) {
- bus_type[i] = 0; /* default ISA bus. */
- }
-
-
- bus_type[0] = 1; /* pci */
-
-// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff;
- bus_sb800[0] = (pci1234x[0] >> 16) & 0xff;
-
- /* sb800 */
- dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4));
-
-
-
- if (dev) {
- bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
-
- bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_isa++;
- for (j = bus_sb800[1]; j < bus_isa; j++)
- bus_type[j] = 1;
- }
-
- for (i = 0; i < 4; i++) {
- dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i));
- if (dev) {
- bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
- bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
- bus_isa++;
- }
- }
- for (j = bus_sb800[2]; j < bus_isa; j++)
- bus_type[j] = 1;
-
-
- /* I/O APICs: APIC ID Version State Address */
- bus_isa = 10;
- apicid_base = CONFIG_MAX_CPUS;
- apicid_sb800 = apicid_base;
+ status = agesawrapper_amdinitlate();
+ if(status) {
+ printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
+ }
+
+ sbdn_sb800 = 0;
+
+ for (i = 0; i < 3; i++) {
+ bus_sb800[i] = 0;
+ }
+
+ for (i = 0; i < 256; i++) {
+ bus_type[i] = 0; /* default ISA bus. */
+ }
+
+ bus_type[0] = 1; /* pci */
+
+// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff;
+ bus_sb800[0] = (pci1234x[0] >> 16) & 0xff;
+
+ /* sb800 */
+ dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4));
+
+ if (dev) {
+ bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ for (j = bus_sb800[1]; j < bus_isa; j++)
+ bus_type[j] = 1;
+ }
+
+ for (i = 0; i < 4; i++) {
+ dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i));
+ if (dev) {
+ bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ }
+ }
+
+ for (j = bus_sb800[2]; j < bus_isa; j++)
+ bus_type[j] = 1;
+
+ /* I/O APICs: APIC ID Version State Address */
+ bus_isa = 10;
+ apicid_base = CONFIG_MAX_CPUS;
+ apicid_sb800 = apicid_base;
#if CONFIG_AMD_SB_CIMX
sb_Late_Post();
diff --git a/src/mainboard/amd/persimmon/mainboard.c b/src/mainboard/amd/persimmon/mainboard.c
index 135f8f458f..3b181a12bf 100644
--- a/src/mainboard/amd/persimmon/mainboard.c
+++ b/src/mainboard/amd/persimmon/mainboard.c
@@ -63,14 +63,14 @@ static void persimmon_enable(device_t dev)
/* TOP_MEM: the top of DRAM below 4G */
msr = rdmsr(TOP_MEM);
printk
- (BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
- __func__, msr.lo, msr.hi);
+ (BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
+ __func__, msr.lo, msr.hi);
/* TOP_MEM2: the top of DRAM above 4G */
msr2 = rdmsr(TOP_MEM2);
printk
- (BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
- __func__, msr2.lo, msr2.hi);
+ (BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
+ __func__, msr2.lo, msr2.hi);
/* refer to UMA Size Consideration in Family14h BKDG. */
sys_mem = msr.lo + 0x1000000; // Ignore 16MB allocated for C6 when finding UMA size, refer MemNGetUmaSizeON()
@@ -78,17 +78,16 @@ static void persimmon_enable(device_t dev)
uma_memory_size = 0x18000000; /* >= 2G memory, 384M recommended UMA */
}
else {
- if (sys_mem >= 0x40000000) {
- uma_memory_size = 0x10000000; /* >= 1G memory, 256M recommended UMA */
- }
- else {
- uma_memory_size = 0x4000000; /* <1G memory, 64M recommended UMA */
- }
+ if (sys_mem >= 0x40000000) {
+ uma_memory_size = 0x10000000; /* >= 1G memory, 256M recommended UMA */
+ } else {
+ uma_memory_size = 0x4000000; /* <1G memory, 64M recommended UMA */
+ }
}
uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */
printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n",
- __func__, uma_memory_size, uma_memory_base);
+ __func__, uma_memory_size, uma_memory_base);
/* TODO: TOP_MEM2 */
#else
@@ -105,9 +104,9 @@ int add_mainboard_resources(struct lb_memory *mem)
*/
#if (CONFIG_GFXUMA == 1)
printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n",
- uma_memory_base, uma_memory_size);
+ uma_memory_base, uma_memory_size);
lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base,
- uma_memory_size);
+ uma_memory_size);
#endif
return 0;
}
diff --git a/src/mainboard/amd/persimmon/mptable.c b/src/mainboard/amd/persimmon/mptable.c
index 546d9bd393..92c842f8ea 100644
--- a/src/mainboard/amd/persimmon/mptable.c
+++ b/src/mainboard/amd/persimmon/mptable.c
@@ -9,12 +9,12 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
@@ -35,124 +35,124 @@ extern u32 bus_type[256];
extern u32 sbdn_sb800;
u8 intr_data[] = {
- [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */
- [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */
- [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- 0x10,0x11,0x12,0x13
+ [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */
+ [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */
+ [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x10,0x11,0x12,0x13
};
static void *smp_write_config_table(void *v)
{
- struct mp_config_table *mc;
- int bus_isa;
+ struct mp_config_table *mc;
+ int bus_isa;
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
- mptable_init(mc, LAPIC_ADDR);
- memcpy(mc->mpc_oem, "AMD ", 8);
+ mptable_init(mc, LAPIC_ADDR);
+ memcpy(mc->mpc_oem, "AMD ", 8);
- smp_write_processors(mc);
+ smp_write_processors(mc);
- get_bus_conf();
+ get_bus_conf();
- mptable_write_buses(mc, NULL, &bus_isa);
+ mptable_write_buses(mc, NULL, &bus_isa);
- /* I/O APICs: APIC ID Version State Address */
+ /* I/O APICs: APIC ID Version State Address */
- u32 dword;
- u8 byte;
+ u32 dword;
+ u8 byte;
- ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword);
- dword &= 0xFFFFFFF0;
- smp_write_ioapic(mc, apicid_sb800, 0x21, dword);
+ ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword);
+ dword &= 0xFFFFFFF0;
+ smp_write_ioapic(mc, apicid_sb800, 0x21, dword);
- for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
- outb(byte | 0x80, 0xC00);
- outb(intr_data[byte], 0xC01);
- }
+ for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
+ outb(byte | 0x80, 0xC00);
+ outb(intr_data[byte], 0xC01);
+ }
- /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
#define IO_LOCAL_INT(type, intr, apicid, pin) \
- smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+ smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
- mptable_add_isa_interrupts(mc, bus_isa, apicid_sb800, 0);
+ mptable_add_isa_interrupts(mc, bus_isa, apicid_sb800, 0);
- /* PCI interrupts are level triggered, and are
- * associated with a specific bus/device/function tuple.
- */
+ /* PCI interrupts are level triggered, and are
+ * associated with a specific bus/device/function tuple.
+ */
#if CONFIG_GENERATE_ACPI_TABLES == 0
#define PCI_INT(bus, dev, fn, pin) \
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin))
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin))
#else
#define PCI_INT(bus, dev, fn, pin)
#endif
- //PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */
- PCI_INT(0x0, 0x14, 0x0, 0x10);
- /* HD Audio: */
- PCI_INT(0x0, 0x14, 0x2, 0x12);
-
- PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */
- PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
- PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
- PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
- PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
- PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
-
- /* sata */
- PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
-
- /* PCI_INT(0x0, 0x14, 0x2, 0x12); */
-
- /* on board NIC & Slot PCIE. */
-
- /* PCI slots */
- /* PCI_SLOT 0. */
- PCI_INT(bus_sb800[1], 0x5, 0x0, 0x14);
- PCI_INT(bus_sb800[1], 0x5, 0x1, 0x15);
- PCI_INT(bus_sb800[1], 0x5, 0x2, 0x16);
- PCI_INT(bus_sb800[1], 0x5, 0x3, 0x17);
-
- /* PCI_SLOT 1. */
- PCI_INT(bus_sb800[1], 0x6, 0x0, 0x15);
- PCI_INT(bus_sb800[1], 0x6, 0x1, 0x16);
- PCI_INT(bus_sb800[1], 0x6, 0x2, 0x17);
- PCI_INT(bus_sb800[1], 0x6, 0x3, 0x14);
-
- /* PCI_SLOT 2. */
- PCI_INT(bus_sb800[1], 0x7, 0x0, 0x16);
- PCI_INT(bus_sb800[1], 0x7, 0x1, 0x17);
- PCI_INT(bus_sb800[1], 0x7, 0x2, 0x14);
- PCI_INT(bus_sb800[1], 0x7, 0x3, 0x15);
-
- PCI_INT(bus_sb800[2], 0x0, 0x0, 0x12);
- PCI_INT(bus_sb800[2], 0x0, 0x1, 0x13);
- PCI_INT(bus_sb800[2], 0x0, 0x2, 0x14);
-
- /* PCIe PortA */
- PCI_INT(0x0, 0x15, 0x0, 0x10);
- /* PCIe PortB */
- PCI_INT(0x0, 0x15, 0x1, 0x11);
- /* PCIe PortC */
- PCI_INT(0x0, 0x15, 0x2, 0x12);
- /* PCIe PortD */
- PCI_INT(0x0, 0x15, 0x3, 0x13);
-
- /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
- IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
- IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
- /* There is no extension information... */
-
- /* Compute the checksums */
- return mptable_finalize(mc);
+ //PCI_INT(0x0, 0x14, 0x1, 0x11); /* IDE. */
+ PCI_INT(0x0, 0x14, 0x0, 0x10);
+ /* HD Audio: */
+ PCI_INT(0x0, 0x14, 0x2, 0x12);
+
+ PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */
+ PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
+ PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
+ PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
+ PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
+ PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
+
+ /* sata */
+ PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
+
+ /* PCI_INT(0x0, 0x14, 0x2, 0x12); */
+
+ /* on board NIC & Slot PCIE. */
+
+ /* PCI slots */
+ /* PCI_SLOT 0. */
+ PCI_INT(bus_sb800[1], 0x5, 0x0, 0x14);
+ PCI_INT(bus_sb800[1], 0x5, 0x1, 0x15);
+ PCI_INT(bus_sb800[1], 0x5, 0x2, 0x16);
+ PCI_INT(bus_sb800[1], 0x5, 0x3, 0x17);
+
+ /* PCI_SLOT 1. */
+ PCI_INT(bus_sb800[1], 0x6, 0x0, 0x15);
+ PCI_INT(bus_sb800[1], 0x6, 0x1, 0x16);
+ PCI_INT(bus_sb800[1], 0x6, 0x2, 0x17);
+ PCI_INT(bus_sb800[1], 0x6, 0x3, 0x14);
+
+ /* PCI_SLOT 2. */
+ PCI_INT(bus_sb800[1], 0x7, 0x0, 0x16);
+ PCI_INT(bus_sb800[1], 0x7, 0x1, 0x17);
+ PCI_INT(bus_sb800[1], 0x7, 0x2, 0x14);
+ PCI_INT(bus_sb800[1], 0x7, 0x3, 0x15);
+
+ PCI_INT(bus_sb800[2], 0x0, 0x0, 0x12);
+ PCI_INT(bus_sb800[2], 0x0, 0x1, 0x13);
+ PCI_INT(bus_sb800[2], 0x0, 0x2, 0x14);
+
+ /* PCIe PortA */
+ PCI_INT(0x0, 0x15, 0x0, 0x10);
+ /* PCIe PortB */
+ PCI_INT(0x0, 0x15, 0x1, 0x11);
+ /* PCIe PortC */
+ PCI_INT(0x0, 0x15, 0x2, 0x12);
+ /* PCIe PortD */
+ PCI_INT(0x0, 0x15, 0x3, 0x13);
+
+ /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
+ IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ return mptable_finalize(mc);
}
unsigned long write_smp_table(unsigned long addr)
{
- void *v;
- v = smp_write_floating_table(addr, 0);
- return (unsigned long)smp_write_config_table(v);
+ void *v;
+ v = smp_write_floating_table(addr, 0);
+ return (unsigned long)smp_write_config_table(v);
}
diff --git a/src/mainboard/amd/persimmon/romstage.c b/src/mainboard/amd/persimmon/romstage.c
index 0eb7490c6a..bf8535f9f1 100644
--- a/src/mainboard/amd/persimmon/romstage.c
+++ b/src/mainboard/amd/persimmon/romstage.c
@@ -9,12 +9,12 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <stdint.h>
@@ -44,78 +44,77 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
- u32 val;
-
- // all cores: allow caching of flash chip code and data
- // (there are no cache-as-ram reliability concerns with family 14h)
- __writemsr (0x20c, (0x0100000000ull - CONFIG_ROM_SIZE) | 5);
- __writemsr (0x20d, (0x1000000000ull - CONFIG_ROM_SIZE) | 0x800);
-
- // all cores: set pstate 0 (1600 MHz) early to save a few ms of boot time
- __writemsr (0xc0010062, 0);
-
- if (!cpu_init_detectedx && boot_cpu()) {
- post_code(0x30);
- sb_Poweron_Init();
-
- post_code(0x31);
- f81865f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- console_init();
- }
-
- /* Halt if there was a built in self test failure */
- post_code(0x34);
- report_bist_failure(bist);
-
- // Load MPB
- val = cpuid_eax(1);
- printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
- printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
-
- post_code(0x35);
- val = agesawrapper_amdinitmmio();
-
- post_code(0x37);
- val = agesawrapper_amdinitreset();
- if(val) {
- printk(BIOS_DEBUG, "agesawrapper_amdinitreset failed: %x \n", val);
- }
-
- post_code(0x38);
- printk(BIOS_DEBUG, "Got past sb800_early_setup\n");
-
- post_code(0x39);
- val = agesawrapper_amdinitearly ();
- if(val) {
- printk(BIOS_DEBUG, "agesawrapper_amdinitearly failed: %x \n", val);
- }
- printk(BIOS_DEBUG, "Got past agesawrapper_amdinitearly\n");
-
- post_code(0x40);
- val = agesawrapper_amdinitpost ();
- if(val) {
- printk(BIOS_DEBUG, "agesawrapper_amdinitpost failed: %x \n", val);
- }
- printk(BIOS_DEBUG, "Got past agesawrapper_amdinitpost\n");
-
- post_code(0x41);
- val = agesawrapper_amdinitenv ();
- if(val) {
- printk(BIOS_DEBUG, "agesawrapper_amdinitenv failed: %x \n", val);
- }
- printk(BIOS_DEBUG, "Got past agesawrapper_amdinitenv\n");
-
- /* Initialize i8259 pic */
- post_code(0x41);
- setup_i8259 ();
-
- /* Initialize i8254 timers */
- post_code(0x42);
- setup_i8254 ();
-
- post_code(0x50);
- copy_and_run(0);
-
- post_code(0x54); // Should never see this post code.
+ u32 val;
+
+ // all cores: allow caching of flash chip code and data
+ // (there are no cache-as-ram reliability concerns with family 14h)
+ __writemsr (0x20c, (0x0100000000ull - CONFIG_ROM_SIZE) | 5);
+ __writemsr (0x20d, (0x1000000000ull - CONFIG_ROM_SIZE) | 0x800);
+
+ // all cores: set pstate 0 (1600 MHz) early to save a few ms of boot time
+ __writemsr (0xc0010062, 0);
+
+ if (!cpu_init_detectedx && boot_cpu()) {
+ post_code(0x30);
+ sb_Poweron_Init();
+
+ post_code(0x31);
+ f81865f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+ console_init();
+ }
+
+ /* Halt if there was a built in self test failure */
+ post_code(0x34);
+ report_bist_failure(bist);
+
+ // Load MPB
+ val = cpuid_eax(1);
+ printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
+ printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
+
+ post_code(0x35);
+ val = agesawrapper_amdinitmmio();
+
+ post_code(0x37);
+ val = agesawrapper_amdinitreset();
+ if(val) {
+ printk(BIOS_DEBUG, "agesawrapper_amdinitreset failed: %x \n", val);
+ }
+
+ post_code(0x38);
+ printk(BIOS_DEBUG, "Got past sb800_early_setup\n");
+
+ post_code(0x39);
+ val = agesawrapper_amdinitearly ();
+ if(val) {
+ printk(BIOS_DEBUG, "agesawrapper_amdinitearly failed: %x \n", val);
+ }
+ printk(BIOS_DEBUG, "Got past agesawrapper_amdinitearly\n");
+
+ post_code(0x40);
+ val = agesawrapper_amdinitpost ();
+ if(val) {
+ printk(BIOS_DEBUG, "agesawrapper_amdinitpost failed: %x \n", val);
+ }
+ printk(BIOS_DEBUG, "Got past agesawrapper_amdinitpost\n");
+
+ post_code(0x41);
+ val = agesawrapper_amdinitenv ();
+ if(val) {
+ printk(BIOS_DEBUG, "agesawrapper_amdinitenv failed: %x \n", val);
+ }
+ printk(BIOS_DEBUG, "Got past agesawrapper_amdinitenv\n");
+
+ /* Initialize i8259 pic */
+ post_code(0x41);
+ setup_i8259 ();
+
+ /* Initialize i8254 timers */
+ post_code(0x42);
+ setup_i8254 ();
+
+ post_code(0x50);
+ copy_and_run(0);
+
+ post_code(0x54); // Should never see this post code.
}
-