summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/ibm/e325/auto.c9
-rw-r--r--src/mainboard/ibm/e325/failover.c5
-rw-r--r--targets/ibm/e325/Config.lb88
3 files changed, 16 insertions, 86 deletions
diff --git a/src/mainboard/ibm/e325/auto.c b/src/mainboard/ibm/e325/auto.c
index dbbcbf597b..b1c9e772d5 100644
--- a/src/mainboard/ibm/e325/auto.c
+++ b/src/mainboard/ibm/e325/auto.c
@@ -158,16 +158,21 @@ static void main(unsigned long bist)
};
int needs_reset;
+ unsigned nodeid;
+
if (bist == 0) {
/* Skip this if there was a built in self test failure */
amd_early_mtrr_init();
enable_lapic();
init_timer();
+
+ nodeid = lapicid() & 0xf;
+
/* Has this cpu already booted? */
- if (cpu_init_detected()) {
+ if (cpu_init_detected(nodeid)) {
asm volatile ("jmp __cpu_reset");
}
- distinguish_cpu_resets();
+ distinguish_cpu_resets(nodeid);
if (!boot_cpu()) {
stop_this_cpu();
}
diff --git a/src/mainboard/ibm/e325/failover.c b/src/mainboard/ibm/e325/failover.c
index e351cae83d..ed5ce32d81 100644
--- a/src/mainboard/ibm/e325/failover.c
+++ b/src/mainboard/ibm/e325/failover.c
@@ -13,11 +13,14 @@
static unsigned long main(unsigned long bist)
{
+ unsigned nodeid;
/* Make cerain my local apic is useable */
enable_lapic();
+ nodeid = lapicid() & 0xf;
+
/* Is this a cpu only reset? */
- if (cpu_init_detected()) {
+ if (cpu_init_detected(nodeid)) {
if (last_boot_normal()) {
goto normal_image;
} else {
diff --git a/targets/ibm/e325/Config.lb b/targets/ibm/e325/Config.lb
index 0a9d6a02c2..709c1d853a 100644
--- a/targets/ibm/e325/Config.lb
+++ b/targets/ibm/e325/Config.lb
@@ -1,87 +1,9 @@
# the IBM E325
# This will make a target directory of ./e325
-loadoptions
-
target e325
-uses ARCH
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_SERIAL_POST
-uses NO_POST
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses HAVE_HARD_RESET
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses k7
-uses k8
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses CONFIG_SMP
-uses CONFIG_MAX_CPUS
-uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses MAINBOARD
-uses CONFIG_CHIP_CONFIGURE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses LINUXBIOS_EXTRA_VERSION
-
-option CONFIG_CHIP_CONFIGURE=1
-
-option MAXIMUM_CONSOLE_LOGLEVEL=9
-option DEFAULT_CONSOLE_LOGLEVEL=9
-option CONFIG_CONSOLE_SERIAL8250=1
-option CONFIG_SERIAL_POST=1
-option NO_POST=0
-
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
-option k7=1
-option k8=1
-
-option ROM_SIZE=1048576
-
-
-option HAVE_OPTION_TABLE=1
-option CONFIG_ROM_STREAM=1
-option HAVE_FALLBACK_BOOT=1
-
-###
-### Compute the location and size of where this firmware image
-### (linuxBIOS plus bootloader) will live in the boot rom chip.
-###
-option FALLBACK_SIZE=131072
-
-## LinuxBIOS C code runs at this location in RAM
-option _RAMBASE=0x00004000
+mainboard ibm/e325
#
###
@@ -95,16 +17,16 @@ romimage "normal"
option USE_FALLBACK_IMAGE=0
option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION=".0Normal"
- mainboard ibm/e325
- payload ../../filo.elf
+# payload ../../filo.elf
+ payload /home/ollie/work/filo-0.4.1/filo.elf
end
romimage "fallback"
option USE_FALLBACK_IMAGE=1
option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION=".0Fallback"
- mainboard ibm/e325
- payload ../../filo.elf
+# payload ../../filo.elf
+ payload /home/ollie/work/filo-0.4.1/filo.elf
# use this to test a build if you don't have the etherboot
# payload /etc/hosts
end