summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/southbridge/amd/sb800/early_setup.c99
-rw-r--r--src/southbridge/amd/sb800/sb800.h13
2 files changed, 54 insertions, 58 deletions
diff --git a/src/southbridge/amd/sb800/early_setup.c b/src/southbridge/amd/sb800/early_setup.c
index 61a0e66588..e9325043b5 100644
--- a/src/southbridge/amd/sb800/early_setup.c
+++ b/src/southbridge/amd/sb800/early_setup.c
@@ -61,7 +61,7 @@ static void sb800_acpi_init(void) {
pmio_write(0x6C, ACPI_PMA_CNT_BLK & 0xFF);
pmio_write(0x6D, ACPI_PMA_CNT_BLK >> 8);
- pm_iowrite(0x74, 1<<0 | 1<<1 | 1<<4 | 1<<2); /* AcpiDecodeEnable, When set, SB uses
+ pmio_write(0x74, 1<<0 | 1<<1 | 1<<4 | 1<<2); /* AcpiDecodeEnable, When set, SB uses
* the contents of the PM registers at
* index 60-6B to decode ACPI I/O address.
* AcpiSmiEn & SmiCmdEn*/
@@ -95,8 +95,7 @@ static u8 get_sb800_revision(void)
return rev;
}
-#if 0
-static void sb800_clk_output_48Mhz(void)
+void sb800_clk_output_48Mhz(void)
{
/* AcpiMMioDecodeEn */
u8 reg8;
@@ -108,7 +107,6 @@ static void sb800_clk_output_48Mhz(void)
*(volatile u32 *)(0xFED80000+0xE00+0x40) &= ~((1 << 0) | (1 << 2)); /* 48Mhz */
*(volatile u32 *)(0xFED80000+0xE00+0x40) |= 1 << 1; /* 48Mhz */
}
-#endif
/***************************************
* Legacy devices are mapped to LPC space.
* Serial port 0
@@ -234,8 +232,7 @@ void soft_reset(void)
outb(0x06, 0x0cf9);
}
-#if 0
-static void sb800_pci_port80(void)
+void sb800_pci_port80(void)
{
u8 byte;
device_t dev;
@@ -279,7 +276,7 @@ static void sb800_pci_port80(void)
byte &= ~(1 << 5); /* disable lpc port 80 */
pci_write_config8(dev, 0x4A, byte);
}
-#endif
+
#define BIT0 (1 << 0)
#define BIT1 (1 << 1)
#define BIT2 (1 << 2)
@@ -296,54 +293,52 @@ struct pm_entry {
};
struct pm_entry const pm_table[] =
{
- {0x5D, 0x00, BIT0},
- {0xD2, 0xCF, BIT4 + BIT5},
- {0x12, 0x00, BIT0},
- {0x28, 0xFF, BIT0},
- {0x44 + 3, 0x7F, BIT7},
- {0x48, 0xFF, BIT0},
- {0x00, 0xFF, 0x0E},
- {0x00 + 2, 0xFF, 0x40},
- {0x00 + 3, 0xFF, 0x08},
- {0x34, 0xEF, BIT0 + BIT1},
- {0xEC, 0xFD, BIT1},
- {0x5B, 0xF9, BIT1 + BIT2},
- {0x08, 0xFE, BIT2 + BIT4},
- {0x08 + 1, 0xFF, BIT0},
- {0x54, 0x00, BIT4 + BIT7},
- {0x04 + 3, 0xFD, BIT1},
- {0x74, 0xF6, BIT0 + BIT3},
- {0xF0, ~BIT2, 0x00},
- {0xF8, 0x00, 0x6C},
- {0xF8 + 1, 0x00, 0x27},
- {0xF8 + 2, 0x00, 0x00},
- {0xC4, 0xFE, 0x14},
- {0xC0 + 2, 0xBF, 0x40},
- {0xBE, 0xDD, BIT5},
- // HPET workaround
- {0x54 + 3, 0xFC, BIT0 + BIT1},
- {0x54 + 2, 0x7F, BIT7},
- {0x54 + 2, 0x7F, 0x00},
- {0xC4, ~(BIT2 + BIT4), BIT2 + BIT4},
- {0xC0, 0, 0xF9},
- {0xC0 + 1, 0x04, 0x03},
- {0xC2, 0x20, 0x58},
- {0xC2 + 1, 0, 0x40},
- {0xC2, ~(BIT4), BIT4},
- {0x74, 0x00, BIT0 + BIT1 + BIT2 + BIT4},
- {0xDE + 1, ~(BIT0 + BIT1), BIT0 + BIT1},
- {0xDE, ~BIT4, BIT4},
- {0xBA, ~BIT3, BIT3},
- {0xBA + 1, ~BIT6, BIT6},
- {0xBC, ~BIT1, BIT1},
- {0xED, ~(BIT0 + BIT1), 0},
- {0xDC, 0x7C, BIT0},
-
+ {0x5D, 0x00, BIT0},
+ {0xD2, 0xCF, BIT4 + BIT5},
+ {0x12, 0x00, BIT0},
+ {0x28, 0xFF, BIT0},
+ {0x44 + 3, 0x7F, BIT7},
+ {0x48, 0xFF, BIT0},
+ {0x00, 0xFF, 0x0E},
+ {0x00 + 2, 0xFF, 0x40},
+ {0x00 + 3, 0xFF, 0x08},
+ {0x34, 0xEF, BIT0 + BIT1},
+ {0xEC, 0xFD, BIT1},
+ {0x5B, 0xF9, BIT1 + BIT2},
+ {0x08, 0xFE, BIT2 + BIT4},
+ {0x08 + 1, 0xFF, BIT0},
+ {0x54, 0x00, BIT4 + BIT7},
+ {0x04 + 3, 0xFD, BIT1},
+ {0x74, 0xF6, BIT0 + BIT3},
+ {0xF0, ~BIT2, 0x00},
+ {0xF8, 0x00, 0x6C},
+ {0xF8 + 1, 0x00, 0x27},
+ {0xF8 + 2, 0x00, 0x00},
+ {0xC4, 0xFE, 0x14},
+ {0xC0 + 2, 0xBF, 0x40},
+ {0xBE, 0xDD, BIT5},
+ // HPET workaround
+ {0x54 + 3, 0xFC, BIT0 + BIT1},
+ {0x54 + 2, 0x7F, BIT7},
+ {0x54 + 2, 0x7F, 0x00},
+ {0xC4, ~(BIT2 + BIT4), BIT2 + BIT4},
+ {0xC0, 0, 0xF9},
+ {0xC0 + 1, 0x04, 0x03},
+ {0xC2, 0x20, 0x58},
+ {0xC2 + 1, 0, 0x40},
+ {0xC2, ~(BIT4), BIT4},
+ {0x74, 0x00, BIT0 + BIT1 + BIT2 + BIT4},
+ {0xDE + 1, ~(BIT0 + BIT1), BIT0 + BIT1},
+ {0xDE, ~BIT4, BIT4},
+ {0xBA, ~BIT3, BIT3},
+ {0xBA + 1, ~BIT6, BIT6},
+ {0xBC, ~BIT1, BIT1},
+ {0xED, ~(BIT0 + BIT1), 0},
+ {0xDC, 0x7C, BIT0},
// {0xFF, 0xFF, 0xFF},
-
};
-static void sb800_lpc_port80(void)
+void sb800_lpc_port80(void)
{
u8 byte;
device_t dev;
diff --git a/src/southbridge/amd/sb800/sb800.h b/src/southbridge/amd/sb800/sb800.h
index 80578c1232..870e36ad97 100644
--- a/src/southbridge/amd/sb800/sb800.h
+++ b/src/southbridge/amd/sb800/sb800.h
@@ -47,12 +47,13 @@ extern void set_sm_enable_bits(device_t sm_dev, u32 reg_pos, u32 mask, u32 val);
#define REV_SB800_A11 0x11
#define REV_SB800_A12 0x12
-/* This shouldn't be called before set_sb800_revision() is called.
- * Once set_sb800_revision() is called, we use get_sb800_revision(),
- * the simpler one, to get the sb800 revision ID.
- * The id is 0x39 if A11, 0x3A if A12, 0x3C if A14, 0x3D if A15.
- * The differentiate is 0x28, isn't it? */
-//#define get_sb800_revision(sm_dev) (pci_read_config8((sm_dev), 0x08) - 0x28)
+#ifdef __PRE_RAM__
+void sb800_lpc_port80(void);
+void sb800_pci_port80(void);
+void sb800_clk_output_48Mhz(void);
+#else
+/* void sb800_setup_sata_phys(struct device *dev); */
+#endif
void sb800_enable(device_t dev);
void sb800_enable_usbdebug(unsigned int port);