diff options
| -rw-r--r-- | src/mainboard/kontron/ktqm77/early_init.c | 6 |
1 files changed, 4 insertions, 2 deletions
diff --git a/src/mainboard/kontron/ktqm77/early_init.c b/src/mainboard/kontron/ktqm77/early_init.c index c326795e28..8df1a5e84e 100644 --- a/src/mainboard/kontron/ktqm77/early_init.c +++ b/src/mainboard/kontron/ktqm77/early_init.c @@ -2,6 +2,7 @@ #include <bootblock_common.h> #include <stdint.h> +#include <device/pnp_def.h> #include <device/pnp_ops.h> #include <device/pci_ops.h> #include <device/pci_def.h> @@ -35,7 +36,7 @@ void bootblock_mainboard_early_init(void) const pnp_devfn_t dev = PNP_DEV(0x2e, 0x9); pnp_enter_conf_state(dev); pnp_write_config(dev, 0x29, 0x02); /* Pins 119, 120 are GPIO21, 20 */ - pnp_write_config(dev, 0x30, 0x03); /* Enable GPIO2+3 */ + pnp_write_config(dev, PNP_IDX_EN, 0x03); /* Enable GPIO2+3 */ pnp_write_config(dev, 0x2a, 0x01); /* Pins 62, 63, 65, 66 are GPIO27, 26, 25, 24 */ pnp_write_config(dev, 0x2c, 0xc3); /* Pin 90 is GPIO32, @@ -46,7 +47,8 @@ void bootblock_mainboard_early_init(void) /* Values can only be changed, when devices are enabled. */ pnp_write_config(dev, 0xe3, 0xdd); /* GPIO2 bits 1, 5 are output */ pnp_write_config(dev, 0xe4, (dis_bl_inv << 5) | (lvds_3v << 1)); /* GPIO2 bits 1, 5 */ - pnp_write_config(dev, 0xf3, 0x40); /* Disable suspend LED during normal operation */ + /* Disable suspend LED during normal operation */ + pnp_write_config(dev, PNP_IDX_MSC3, 0x40); pnp_exit_conf_state(dev); } |