diff options
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspUpd.h | 48 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspmUpd.h | 710 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspsUpd.h | 289 | ||||
| -rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FsptUpd.h | 109 |
4 files changed, 1156 insertions, 0 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspUpd.h new file mode 100644 index 0000000000..1aa46a00a1 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspUpd.h @@ -0,0 +1,48 @@ +/** @file + +Copyright (c) 2017, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPUPD_H__ +#define __FSPUPD_H__ + +#include <FspEas.h> + +#pragma pack(1) + +#define FSPT_UPD_SIGNATURE 0x545F445055564E44 /* 'DNVUPD_T' */ + +#define FSPM_UPD_SIGNATURE 0x4D5F445055564E44 /* 'DNVUPD_M' */ + +#define FSPS_UPD_SIGNATURE 0x535F445055564E44 /* 'DNVUPD_S' */ + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspmUpd.h new file mode 100644 index 0000000000..3aa74a0f3a --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspmUpd.h @@ -0,0 +1,710 @@ +/** @file + +Copyright (c) 2017, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPMUPD_H__ +#define __FSPMUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + +#define MAX_CH 2 /* Maximum Number of Memory Channels */ +#define MAX_DIMM 2 /* Maximum Number of DIMMs PER Memory Channel */ +#define MAX_SPD_BYTES 512 /* Maximum Number of SPD bytes */ + +/* + * Memory Down structures. + */ +typedef enum { + STATE_MEMORY_SLOT = 0, /* No memory down and a physical memory slot. */ + STATE_MEMORY_DOWN = 1, /* Memory down and not a physical memory slot. */ +} MemorySlotState; + +typedef struct { + MemorySlotState SlotState[MAX_CH][MAX_DIMM]; /* Memory Down state of + each DIMM in each + Channel */ + UINT16 SpdDataLen; /* Length in Bytes of a single DIMM's SPD Data */ + UINT8 *SpdDataPtr[MAX_CH][MAX_DIMM]; /* Pointer to SPD Data for each + DIMM in each Channel */ +} MEMORY_DOWN_CONFIG; + +/* +* SMBIOS Memory Info structures. +*/ +typedef struct { + UINT8 DimmId; + UINT32 SizeInMb; + UINT16 MfgId; + UINT8 + ModulePartNum[20]; /* Module part number for DDR3 is 18 bytes + however for DRR4 20 bytes as per JEDEC Spec, + so reserving 20 bytes */ +} DIMM_INFO; + +typedef struct { + UINT8 ChannelId; + UINT8 DimmCount; + DIMM_INFO DimmInfo[MAX_DIMM]; +} CHANNEL_INFO; + +typedef struct { + UINT8 Revision; + UINT16 DataWidth; + /** As defined in SMBIOS 3.0 spec + Section 7.18.2 and Table 75 + **/ + UINT8 MemoryType; + UINT16 MemoryFrequencyInMHz; + /** As defined in SMBIOS 3.0 spec + Section 7.17.3 and Table 72 + **/ + UINT8 ErrorCorrectionType; + UINT8 ChannelCount; + CHANNEL_INFO ChannelInfo[MAX_CH]; +} FSP_SMBIOS_MEMORY_INFO; + +/* +* GBE PCD supported states. +*/ +typedef enum { + BL_GBE0_GBE1_DISABLED, + BL_GBE0_GBE1_ENABLED, + BL_GBE1_DISABLED, +} BL_GBE_PCD_STATE; + +/* +* FIA MUX configuration structures. +*/ + +#define BL_ME_FIA_MUX_LANE_NUM_MAX 20 +#define BL_ME_FIA_MUX_LANE_NUM_MIN 1 +#define BL_ME_FIA_MUX_LANE_MUX_SEL_WIDTH 2 +#define BL_ME_FIA_MUX_LANE_MUX_SEL_MASK 0x3 +#define BL_ME_FIA_MUX_LANE_XHCI_ONLY 0xFF00000000 + +typedef enum { + BL_FIA_LANE00 = 0, + BL_FIA_LANE01, + BL_FIA_LANE02, + BL_FIA_LANE03, + BL_FIA_LANE04, + BL_FIA_LANE05, + BL_FIA_LANE06, + BL_FIA_LANE07, + BL_FIA_LANE08, + BL_FIA_LANE09, + BL_FIA_LANE10, + BL_FIA_LANE11, + BL_FIA_LANE12, + BL_FIA_LANE13, + BL_FIA_LANE14, + BL_FIA_LANE15, + BL_FIA_LANE16, + BL_FIA_LANE17, + BL_FIA_LANE18, + BL_FIA_LANE19, +} BL_ME_FIA_MUX_LANE_ORDER; + +#define BL_ME_FIA_MUX_LANE_SATA0_BEGING BL_FIA_LANE04 +#define BL_ME_FIA_MUX_LANE_SATA1_BEGING BL_FIA_LANE12 + +#define BL_FIA_LANE_CONFIG(Config, Lane) \ + ((UINT64)((UINT64)(Config) \ + << ((UINT64)(Lane) * (BL_ME_FIA_MUX_LANE_MUX_SEL_WIDTH)))) + +typedef union _BL_ME_FIA_MUX_CONFIG { + UINT64 MeFiaMuxLaneConfig; + struct { + UINT64 Lane00MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE + UINT64 Lane01MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE + UINT64 Lane02MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE + UINT64 Lane03MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE + UINT64 Lane04MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or + // SATA + UINT64 Lane05MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or + // SATA + UINT64 Lane06MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or + // SATA + UINT64 Lane07MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or + // SATA + UINT64 Lane08MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or + // SATA + UINT64 Lane09MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or + // SATA + UINT64 Lane10MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or + // SATA + UINT64 Lane11MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or + // SATA + UINT64 Lane12MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or + // SATA + UINT64 Lane13MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or + // SATA + UINT64 Lane14MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or + // SATA + UINT64 Lane15MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or + // SATA + UINT64 Lane16MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or XHCI or + // SATA + UINT64 Lane17MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or XHCI or + // SATA + UINT64 Lane18MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or XHCI or + // SATA + UINT64 Lane19MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or XHCI or + // SATA + UINT64 Reserved : 24; + } BL_MeFiaMuxLaneMuxSel; +} BL_ME_FIA_MUX_CONFIG; + +typedef enum { + BL_ME_FIA_MUX_LANE_DISCONNECTED, + BL_ME_FIA_MUX_LANE_PCIE, + BL_ME_FIA_MUX_LANE_SATA, + BL_ME_FIA_MUX_LANE_XHCI, +} BL_ME_FIA_MUX_LANE_CONFIG; + +#define BL_ME_FIA_SATA_LANE_SEL_WIDTH 2 +#define BL_ME_FIA_SATA_LANE_XHCI_ONLY 0x55000000 + +typedef enum { + BL_FIA_SATA_LANE04 = 0, + BL_FIA_SATA_LANE05, + BL_FIA_SATA_LANE06, + BL_FIA_SATA_LANE07, + BL_FIA_SATA_LANE08, + BL_FIA_SATA_LANE09, + BL_FIA_SATA_LANE10, + BL_FIA_SATA_LANE11, + BL_FIA_SATA_LANE12, + BL_FIA_SATA_LANE13, + BL_FIA_SATA_LANE14, + BL_FIA_SATA_LANE15, + BL_FIA_SATA_LANE16, + BL_FIA_SATA_LANE17, + BL_FIA_SATA_LANE18, + BL_FIA_SATA_LANE19 +} BL_ME_FIA_SATA_LANE_ORDER; + +#define BL_FIA_SATA_LANE_CONFIG(Config, Lane) \ + ((UINT32)((UINT32)(Config) \ + << ((UINT32)(Lane) * (BL_ME_FIA_SATA_LANE_SEL_WIDTH)))) + +typedef union _BL_ME_FIA_SATA_CONFIG { + UINT64 MeFiaSataLaneConfig; + struct { + UINT64 Lane04SataSel : 2; + UINT64 Lane05SataSel : 2; + UINT64 Lane06SataSel : 2; + UINT64 Lane07SataSel : 2; + UINT64 Lane08SataSel : 2; + UINT64 Lane09SataSel : 2; + UINT64 Lane10SataSel : 2; + UINT64 Lane11SataSel : 2; + UINT64 Lane12SataSel : 2; + UINT64 Lane13SataSel : 2; + UINT64 Lane14SataSel : 2; + UINT64 Lane15SataSel : 2; + UINT64 Lane16SataSel : 2; + UINT64 Lane17SataSel : 2; + UINT64 Lane18SataSel : 2; + UINT64 Lane19SataSel : 2; + UINT64 Reserved : 32; + } BL_MeFiaSataLaneSataSel; +} BL_ME_FIA_SATA_CONFIG; + +typedef enum { + BL_ME_FIA_SATA_CONTROLLER_LANE_ASSIGNED = 0, + BL_ME_FIA_SATA_CONTROLLER_LANE_NOT_ASSIGNED = 1, + BL_ME_FIA_SATA_CONTROLLER_LANE_SS_AND_GPIO_ASSIGNED = 3 +} BL_ME_FIA_SATA_LANE_CONFIG; + +#define BL_ME_FIA_PCIE_ROOT_PORT_LINK_WIDTH_SEL_WIDTH 4 +#define BL_ME_FIA_PCIE_ROOT_PORTS_STATE_WIDTH 8 +#define BL_ME_FIA_PCIE_ROOT_CONFIG_XHCI_ONLY 0x0 + +typedef enum { + BL_FIA_PCIE_ROOT_PORT_0 = 0, + BL_FIA_PCIE_ROOT_PORT_1, + BL_FIA_PCIE_ROOT_PORT_2, + BL_FIA_PCIE_ROOT_PORT_3, + BL_FIA_PCIE_ROOT_PORT_4, + BL_FIA_PCIE_ROOT_PORT_5, + BL_FIA_PCIE_ROOT_PORT_6, + BL_FIA_PCIE_ROOT_PORT_7 +} BL_ME_FIA_PCIE_ROOT_PORT_ORDER; + +#define BL_FIA_PCIE_ROOT_PORT_CONFIG(Type, Config, PcieRootPort) \ + (((Type) == BL_ME_FIA_PCIE_ROOT_PORT_STATE) \ + ? ((UINT64)((UINT64)(Config) << (UINT64)(PcieRootPort))) \ + : ((UINT64)( \ + (UINT64)(Config) << (UINT64)( \ + ((UINT64)(PcieRootPort) * \ + (BL_ME_FIA_PCIE_ROOT_PORT_LINK_WIDTH_SEL_WIDTH)) + \ + BL_ME_FIA_PCIE_ROOT_PORTS_STATE_WIDTH)))) + +typedef union _BL_ME_FIA_PCIE_ROOT_PORTS_CONFIG { + UINT64 MeFiaPcieRootPortsConfig; + struct { + UINT64 PcieRp0En : 1; + UINT64 PcieRp1En : 1; + UINT64 PcieRp2En : 1; + UINT64 PcieRp3En : 1; + UINT64 PcieRp4En : 1; + UINT64 PcieRp5En : 1; + UINT64 PcieRp6En : 1; + UINT64 PcieRp7En : 1; + UINT64 PcieRp0LinkWidth : 4; + UINT64 PcieRp1LinkWidth : 4; + UINT64 PcieRp2LinkWidth : 4; + UINT64 PcieRp3LinkWidth : 4; + UINT64 PcieRp4LinkWidth : 4; + UINT64 PcieRp5LinkWidth : 4; + UINT64 PcieRp6LinkWidth : 4; + UINT64 PcieRp7LinkWidth : 4; + UINT64 Reserved : 24; + } BL_MeFiaPcieRpConfig; +} BL_ME_FIA_PCIE_ROOT_PORTS_CONFIG; + +typedef enum { + BL_ME_FIA_PCIE_ROOT_PORT_STATE, + BL_ME_FIA_PCIE_ROOT_PORT_LINK_WIDTH +} BL_ME_FIA_PCIE_ROOT_PORT_CONFIG_TYPE; + +typedef enum { + BL_ME_FIA_PCIE_ROOT_PORT_DISABLED, + BL_ME_FIA_PCIE_ROOT_PORT_ENABLED +} BL_ME_FIA_PCIE_ROOT_PORT_STATE_CONFIG; + +typedef enum { + BL_ME_FIA_PCIE_ROOT_PORT_LINK_WIDTH_BICTRL = 0, + BL_ME_FIA_PCIE_ROOT_PORT_LINK_X1 = 0xF +} BL_ME_FIA_PCIE_ROOT_PORT_LINK_CONFIG; + +typedef struct _BL_ME_FIA_CONFIG { + BL_ME_FIA_MUX_CONFIG MuxConfiguration; + BL_ME_FIA_SATA_CONFIG SataLaneConfiguration; + BL_ME_FIA_PCIE_ROOT_PORTS_CONFIG PcieRootPortsConfiguration; +} BL_ME_FIA_CONFIG; + +/* + * The FIA_MUX_CONFIG block describes the expected configuration of + * FIA MUX configuration. + */ +typedef struct { + UINT32 SkuNumLanesAllowed; // Platform view of Num Lanes allowed + BL_ME_FIA_CONFIG FiaMuxConfig; // Current Platform FIA MUX Configuration + BL_ME_FIA_CONFIG FiaMuxConfigRequest; // FIA MUX Configuration Requested +} BL_FIA_MUX_CONFIG; + +/* + * The FIA_MUX_CONFIG_STATUS describes the status of configuring + * FIA MUX configuration. +*/ +typedef struct { + UINT64 FiaMuxConfigGetStatus; // Status returned from FiaMuxConfigGet, + // if not EFI_SUCCESS, then error occurred + // and user can decide on next steps + UINT64 FiaMuxConfigSetStatus; // Status returned from FiaMuxConfigSet, + // if not EFI_SUCCESS, then error occurred + // and user can decide on next steps + BOOLEAN FiaMuxConfigSetRequired; // Boolean: true - a FiaMuxConfigSet + // was required, false otherwise +} BL_FIA_MUX_CONFIG_STATUS; + +/* +* FIA MUX Config HOB structure +*/ +typedef struct { + BL_FIA_MUX_CONFIG FiaMuxConfig; + BL_FIA_MUX_CONFIG_STATUS FiaMuxConfigStatus; +} BL_FIA_MUX_CONFIG_HOB; + +/* PCIe port bifurcation codes - matches setup option values */ +#define PCIE_BIF_CTRL_x2x2x2x2 0 +#define PCIE_BIF_CTRL_x2x2x4 1 +#define PCIE_BIF_CTRL_x4x2x2 2 +#define PCIE_BIF_CTRL_x4x4 3 +#define PCIE_BIF_CTRL_x8 4 + +#define BL_MAX_PCIE_CTRL 2 + +/* + * HSIO INFORMATION structure + */ +typedef enum { + BL_SKU_HSIO_06 = 6, + BL_SKU_HSIO_08 = 8, + BL_SKU_HSIO_10 = 10, + BL_SKU_HSIO_12 = 12, + BL_SKU_HSIO_20 = 20, +} BL_SKU_HSIO_LANE_NUMBER; + +typedef struct { + UINT16 NumLanesSupported; + UINT8 PcieBifCtr[BL_MAX_PCIE_CTRL]; + BL_ME_FIA_CONFIG FiaConfig; +} BL_HSIO_INFORMATION; + +/* + * eMMC DLL structure for EMMC DLL registers settings + */ +typedef struct { + UINT32 TxCmdCntl; + UINT32 TxDataCntl1; + UINT32 TxDataCntl2; + UINT32 RxCmdDataCntl1; + UINT32 RxStrobeCntl; + UINT32 RxCmdDataCntl2; + UINT32 MasterSwCntl; +} BL_EMMC_DLL_CONFIG; + +typedef struct { + UINT16 Signature; + BL_EMMC_DLL_CONFIG eMMCDLLConfig; +} BL_EMMC_INFORMATION; + +typedef enum { + BL_FAST_BOOT_CHECKER_NORMAL = 0, + BL_FAST_BOOT_CHECKER_WARNING, + BL_FAST_BOOT_CHECKER_CRITICAL +} BL_FAST_BOOT_CHECKER; + +#define BL_MAX_SCRUB_SEGMENTS 5 + +typedef struct { + UINT16 Start; // Determines the low range for a memory segment (in MB) + UINT16 End; // Determines the high range for a memory segment (in MB) +} BL_SCRUB_SEGMENT; + +typedef struct { + UINT8 NumberOfSegments; + UINT8 Reserved; + BL_SCRUB_SEGMENT ScrubSegment[BL_MAX_SCRUB_SEGMENTS]; +} BL_MEMORY_SCRUB_SEGMENTS; + +/** Fsp M Configuration +**/ +typedef struct { + + /** Offset 0x0040 - Tseg Size + Size of SMRAM memory reserved. + 2:2 MB, 4:4 MB, 8:8 MB, 16:16 MB + **/ + UINT8 PcdSmmTsegSize; + + /** Offset 0x0041 - FSP Debug Print Level + Select the FSP debug message print level. + 0:NO DEBUG, 1:MIN DEBUG, 2:MED DEBUG, 3:VERBOSE DEBUG + **/ + UINT8 PcdFspDebugPrintErrorLevel; + + /** Offset 0x0042 - Channel 0 DIMM 0 SPD SMBus Address + SPD SMBus Address of each DIMM slot. + **/ + UINT8 PcdSpdSmbusAddress_0_0; + + /** Offset 0x0043 - Channel 0 DIMM 1 SPD SMBus Address + SPD SMBus Address of each DIMM slot. + **/ + UINT8 PcdSpdSmbusAddress_0_1; + + /** Offset 0x0044 - Channel 1 DIMM 0 SPD SMBus Address + SPD SMBus Address of each DIMM slot. + **/ + UINT8 PcdSpdSmbusAddress_1_0; + + /** Offset 0x0045 - Channel 1 DIMM 1 SPD SMBus Address + SPD SMBus Address of each DIMM slot. + **/ + UINT8 PcdSpdSmbusAddress_1_1; + + /** Offset 0x0046 - Enable Rank Margin Tool + Enable/disable Rank Margin Tool. + $EN_DIS + **/ + UINT8 PcdMrcRmtSupport; + + /** Offset 0x0047 - RMT CPGC exp_loop_cnt + Set the CPGC exp_loop_cnt field for RMT execution 2^(exp_loop_cnt -1). + 1:1, 2:2, 3:3, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, + 13:13, 14:14, 15:15 + **/ + UINT8 PcdMrcRmtCpgcExpLoopCntValue; + + /** Offset 0x0048 - RMT CPGC num_bursts + Set the CPGC num_bursts field for RMT execution 2^(num_bursts -1). + 1:1, 2:2, 3:3, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, + 13:13, 14:14, 15:15 + **/ + UINT8 PcdMrcRmtCpgcNumBursts; + + /** Offset 0x0049 - Preserve Memory Across Reset + Enable/disable memory preservation across reset. + $EN_DIS + **/ + UINT8 PcdMemoryPreservation; + + /** Offset 0x004A - Fast Boot + Enable/disable Fast Boot function. Once enabled, all following boots + will use the + presaved MRC data to improve the boot performance. + $EN_DIS + **/ + UINT8 PcdFastBoot; + + /** Offset 0x004B - ECC Support + Enable/disable ECC Support. + $EN_DIS + **/ + UINT8 PcdEccSupport; + + /** Offset 0x004C - HSUART Device + Select the PCI High Speed UART Device for Serial Port. + 0:HSUART0, 1:HSUART1, 2:HSUART2 + **/ + UINT8 PcdHsuartDevice; + + /** Offset 0x004D - Memory Down + Enable/disable Memory Down function. + $EN_DIS + **/ + UINT8 PcdMemoryDown; + + /** Offset 0x004E + **/ + UINT32 PcdMemoryDownConfigPtr; + + /** Offset 0x0052 - SATA Controller 0 + Enable/disable SATA Controller 0. + $EN_DIS + **/ + UINT8 PcdEnableSATA0; + + /** Offset 0x0053 - SATA Controller 1 + Enable/disable SATA Controller 1. + $EN_DIS + **/ + UINT8 PcdEnableSATA1; + + /** Offset 0x0054 - Intel Quick Assist Technology + Enable/disable Intel Quick Assist Technology. + $EN_DIS + **/ + UINT8 PcdEnableIQAT; + + /** Offset 0x0055 - SPD Write Disable + Select SMBus SPD Write Enable State (Default: 0 = [FORCE_ENABLE], 1 = + [FORCE_DISABLE]) + 0:Force Enable, 1:Force Disable + **/ + UINT8 PcdSmbusSpdWriteDisable; + + /** Offset 0x0056 - ME_SHUTDOWN Message + Enable/Disable sending ME_SHUTDOWN message to ME, refer to FSP + Integration Guide + for details. + $EN_DIS + **/ + UINT8 PcdEnableMeShutdown; + + /** Offset 0x0057 - XHCI Controller + Enable / Disable XHCI controller + $EN_DIS + **/ + UINT8 PcdEnableXhci; + + /** Offset 0x0058 - Memory Frequency + Set DDR Memory Frequency, refer to FSP Integration Guide for details. + 15:Auto, 3:1600, 4:1866, 5:2133, 6:2400 + **/ + UINT8 PcdDdrFreq; + + /** Offset 0x0059 - MMIO Size + Set memory mapped IO space size + 0:2048M, 1:1024M, 2:3072M + **/ + UINT8 PcdMmioSize; + + /** Offset 0x005A - ME HECI Communication + Enable/Disable ME HECI communication + $EN_DIS + **/ + UINT8 PcdMeHeciCommunication; + + /** Offset 0x005B - HSIO Lanes Number + HSIO lanes number of SKU + 6:6, 8:8, 10:10, 12:12, 20:20 + **/ + UINT8 PcdHsioLanesNumber; + + /** Offset 0x005C + **/ + UINT32 PcdFiaMuxConfigPtr; + + /** Offset 0x0060 - Customer Revision + The Customer can set this revision string for their own purpose. + **/ + UINT8 PcdCustomerRevision[32]; + + /** Offset 0x0080 - 32-Bit bus mode + Enable/Disable 32-Bit bus memory mode. + $EN_DIS + **/ + UINT8 PcdHalfWidthEnable; + + /** Offset 0x0081 - TCL Performance + Enable/Disable Tcl timing for performance. + $EN_DIS + **/ + UINT8 PcdTclIdle; + + /** Offset 0x0082 - Interleave Mode + Select Interleave Mode + 0:DISABLED, 1:MODE0, 2:MODE1, 3:MODE2 + **/ + UINT8 PcdInterleaveMode; + + /** Offset 0x0083 - Memory Thermal Throttling + Enable/disable Memory Thermal Throttling management mode + $EN_DIS + **/ + UINT8 PcdMemoryThermalThrottling; + + /** Offset 0x0084 - Memory Test + Enable / Disable Memory Test, refer to FSP Integration Guide for + details. + $EN_DIS + **/ + UINT8 PcdSkipMemoryTest; + + /** Offset 0x0085 + **/ + BL_MEMORY_SCRUB_SEGMENTS *PcdScrubSegmentPtr; + + /** Offset 0x0089 - USB2 Port 1 OC Pin + Map selected OC pin to the port + 0:OC Pin 0, 8:No pin mapped + **/ + UINT8 PcdUsb2Port1Pin; + + /** Offset 0x008A - USB2 Port 2 OC Pin + Map selected OC pin to the port + 0:OC Pin 0, 8:No pin mapped + **/ + UINT8 PcdUsb2Port2Pin; + + /** Offset 0x008B - USB2 Port 3 OC Pin + Map selected OC pin to the port + 0:OC Pin 0, 8:No pin mapped + **/ + UINT8 PcdUsb2Port3Pin; + + /** Offset 0x008C - USB2 Port 4 OC Pin + Map selected OC pin to the port + 0:OC Pin 0, 8:No pin mapped + **/ + UINT8 PcdUsb2Port4Pin; + + /** Offset 0x008D - USB3 Port 1 OC Pin + Map selected OC pin to the port + 0:OC Pin 0, 8:No pin mapped + **/ + UINT8 PcdUsb3Port1Pin; + + /** Offset 0x008E - USB3 Port 2 OC Pin + Map selected OC pin to the port + 0:OC Pin 0, 8:No pin mapped + **/ + UINT8 PcdUsb3Port2Pin; + + /** Offset 0x008F - USB3 Port 3 OC Pin + Map selected OC pin to the port + 0:OC Pin 0, 8:No pin mapped + **/ + UINT8 PcdUsb3Port3Pin; + + /** Offset 0x0090 - USB3 Port 4 OC Pin + Map selected OC pin to the port + 0:OC Pin 0, 8:No pin mapped + **/ + UINT8 PcdUsb3Port4Pin; + + /** Offset 0x0091 - IOxAPIC 0-199 + Enable/disable IOxAPIC 24-119 entries + $EN_DIS + **/ + UINT8 PcdIOxAPIC0_199; + + /** Offset 0x0092 - DMAP_X16 + Enable/Disable DMAP_X16 dynamic MRC field indicating memory device + width is x16 or not + $EN_DIS + **/ + UINT8 PcdDmapX16; + + /** Offset 0x0093 + **/ + UINT8 UnusedUpdSpace0[333]; + + /** Offset 0x01E0 + **/ + UINT8 ReservedMemoryInitUpd[16]; +} FSP_M_CONFIG; + +/** Fsp M UPD Configuration +**/ +typedef struct { + + /** Offset 0x0000 + **/ + FSP_UPD_HEADER FspUpdHeader; + + /** Offset 0x0020 + **/ + FSPM_ARCH_UPD FspmArchUpd; + + /** Offset 0x0040 + **/ + FSP_M_CONFIG FspmConfig; + + /** Offset 0x01F0 + **/ + UINT8 UnusedUpdSpace1[14]; + + /** Offset 0x01FE + **/ + UINT16 UpdTerminator; +} FSPM_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspsUpd.h new file mode 100644 index 0000000000..f76f1a5e55 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspsUpd.h @@ -0,0 +1,289 @@ +/** @file + +Copyright (c) 2017, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPSUPD_H__ +#define __FSPSUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + +/** Fsp S Configuration +**/ +typedef struct { + + /** Offset 0x0020 - PCIe Controller 0 Bifurcation + Configure PCI Express controller 0 bifurcation. + 0:X2X2X2X2, 1:X2X2X4, 2:X4X2X2, 3:X4X4, 4:X8 + **/ + UINT8 PcdBifurcationPcie0; + + /** Offset 0x0021 - PCIe Controller 1 Bifurcation + Configure PCI Express controller 1 bifurcation. + 0:X2X2X2X2, 1:X2X2X4, 2:X4X2X2, 3:X4X4, 4:X8 + **/ + UINT8 PcdBifurcationPcie1; + + /** Offset 0x0022 - Active Core Count + Select # of Active Cores (Default: 0, 0:ALL, 1..15 = 1..15 Cores) + 0:ALL, 1:1, 2:2, 3:3, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, + 12:12, 13:13, + 14:14, 15:15 + **/ + UINT8 PcdActiveCoreCount; + + /** Offset 0x0023 + **/ + UINT32 PcdCpuMicrocodePatchBase; + + /** Offset 0x0027 + **/ + UINT32 PcdCpuMicrocodePatchSize; + + /** Offset 0x002B - PCIe Controller 0 + Enable / Disable PCI Express controller 0 + $EN_DIS + **/ + UINT8 PcdEnablePcie0; + + /** Offset 0x002C - PCIe Controller 1 + Enable / Disable PCI Express controller 1 + $EN_DIS + **/ + UINT8 PcdEnablePcie1; + + /** Offset 0x002D - Embedded Multi-Media Controller (eMMC) + Enable / Disable Embedded Multi-Media controller + $EN_DIS + **/ + UINT8 PcdEnableEmmc; + + /** Offset 0x002E - LAN Controllers + Enable / Disable LAN controllers, refer to FSP Integration Guide for + details. + 0:Disable LAN 0 & LAN 1, 1:Enable LAN 0 & LAN 1, 2:Disable LAN 1 only + **/ + UINT8 PcdEnableGbE; + + /** Offset 0x002F + **/ + UINT32 PcdFiaMuxConfigRequestPtr; + + /** Offset 0x0033 + **/ + UINT8 UnusedUpdSpace0[4]; + + /** Offset 0x0037 - PCIe Root Port 0 DeEmphasis + Desired DeEmphasis level for PCIE root port + 0:6dB, 1:3.5dB + **/ + UINT8 PcdPcieRootPort0DeEmphasis; + + /** Offset 0x0038 - PCIe Root Port 1 DeEmphasis + Desired DeEmphasis level for PCIE root port + 0:6dB, 1:3.5dB + **/ + UINT8 PcdPcieRootPort1DeEmphasis; + + /** Offset 0x0039 - PCIe Root Port 2 DeEmphasis + Desired DeEmphasis level for PCIE root port + 0:6dB, 1:3.5dB + **/ + UINT8 PcdPcieRootPort2DeEmphasis; + + /** Offset 0x003A - PCIe Root Port 3 DeEmphasis + Desired DeEmphasis level for PCIE root port + 0:6dB, 1:3.5dB + **/ + UINT8 PcdPcieRootPort3DeEmphasis; + + /** Offset 0x003B - PCIe Root Port 4 DeEmphasis + Desired DeEmphasis level for PCIE root port + 0:6dB, 1:3.5dB + **/ + UINT8 PcdPcieRootPort4DeEmphasis; + + /** Offset 0x003C - PCIe Root Port 5 DeEmphasis + Desired DeEmphasis level for PCIE root port + 0:6dB, 1:3.5dB + **/ + UINT8 PcdPcieRootPort5DeEmphasis; + + /** Offset 0x003D - PCIe Root Port 6 DeEmphasis + Desired DeEmphasis level for PCIE root port + 0:6dB, 1:3.5dB + **/ + UINT8 PcdPcieRootPort6DeEmphasis; + + /** Offset 0x003E - PCIe Root Port 7 DeEmphasis + Desired DeEmphasis level for PCIE root port + 0:6dB, 1:3.5dB + **/ + UINT8 PcdPcieRootPort7DeEmphasis; + + /** Offset 0x003F + **/ + UINT8 UnusedUpdSpace1; + + /** Offset 0x0040 + **/ + UINT32 PcdEMMCDLLConfigPtr; + + /** Offset 0x0044 - PCIe Root Port 0 Link Speed + Upper limit on link operational speed for PCI Express RootPort + 1:GEN1, 2:GEN2, 3:GEN3 + **/ + UINT8 PcdPcieRootPort0LinkSpeed; + + /** Offset 0x0045 - PCIe Root Port 1 Link Speed + Upper limit on link operational speed for PCI Express RootPort + 1:GEN1, 2:GEN2, 3:GEN3 + **/ + UINT8 PcdPcieRootPort1LinkSpeed; + + /** Offset 0x0046 - PCIe Root Port 2 Link Speed + Upper limit on link operational speed for PCI Express RootPort + 1:GEN1, 2:GEN2, 3:GEN3 + **/ + UINT8 PcdPcieRootPort2LinkSpeed; + + /** Offset 0x0047 - PCIe Root Port 3 Link Speed + Upper limit on link operational speed for PCI Express RootPort + 1:GEN1, 2:GEN2, 3:GEN3 + **/ + UINT8 PcdPcieRootPort3LinkSpeed; + + /** Offset 0x0048 - PCIe Root Port 4 Link Speed + Upper limit on link operational speed for PCI Express RootPort + 1:GEN1, 2:GEN2, 3:GEN3 + **/ + UINT8 PcdPcieRootPort4LinkSpeed; + + /** Offset 0x0049 - PCIe Root Port 5 Link Speed + Upper limit on link operational speed for PCI Express RootPort + 1:GEN1, 2:GEN2, 3:GEN3 + **/ + UINT8 PcdPcieRootPort5LinkSpeed; + + /** Offset 0x004A - PCIe Root Port 6 Link Speed + Upper limit on link operational speed for PCI Express RootPort + 1:GEN1, 2:GEN2, 3:GEN3 + **/ + UINT8 PcdPcieRootPort6LinkSpeed; + + /** Offset 0x004B - PCIe Root Port 7 Link Speed + Upper limit on link operational speed for PCI Express RootPort + 1:GEN1, 2:GEN2, 3:GEN3 + **/ + UINT8 PcdPcieRootPort7LinkSpeed; + + /** Offset 0x004C - PCIe Root Port 0 ASPM + Enable PCI Express Active State Power Management settings + 0:Disabled, 2:L1 + **/ + UINT8 PcdPcieRootPort0Aspm; + + /** Offset 0x004D - PCIe Root Port 1 ASPM + Enable PCI Express Active State Power Management settings + 0:Disabled, 2:L1 + **/ + UINT8 PcdPcieRootPort1Aspm; + + /** Offset 0x004E - PCIe Root Port 2 ASPM + Enable PCI Express Active State Power Management settings + 0:Disabled, 2:L1 + **/ + UINT8 PcdPcieRootPort2Aspm; + + /** Offset 0x004F - PCIe Root Port 3 ASPM + Enable PCI Express Active State Power Management settings + 0:Disabled, 2:L1 + **/ + UINT8 PcdPcieRootPort3Aspm; + + /** Offset 0x0050 - PCIe Root Port 4 ASPM + Enable PCI Express Active State Power Management settings + 0:Disabled, 2:L1 + **/ + UINT8 PcdPcieRootPort4Aspm; + + /** Offset 0x0051 - PCIe Root Port 5 ASPM + Enable PCI Express Active State Power Management settings + 0:Disabled, 2:L1 + **/ + UINT8 PcdPcieRootPort5Aspm; + + /** Offset 0x0052 - PCIe Root Port 6 ASPM + Enable PCI Express Active State Power Management settings + 0:Disabled, 2:L1 + **/ + UINT8 PcdPcieRootPort6Aspm; + + /** Offset 0x0053 - PCIe Root Port 7 ASPM + Enable PCI Express Active State Power Management settings + 0:Disabled, 2:L1 + **/ + UINT8 PcdPcieRootPort7Aspm; + + /** Offset 0x0054 + **/ + UINT8 UnusedUpdSpace2[140]; + + /** Offset 0x00E0 + **/ + UINT8 ReservedSiliconInitUpd[16]; +} FSP_S_CONFIG; + +/** Fsp S UPD Configuration +**/ +typedef struct { + + /** Offset 0x0000 + **/ + FSP_UPD_HEADER FspUpdHeader; + + /** Offset 0x0020 + **/ + FSP_S_CONFIG FspsConfig; + + /** Offset 0x00F0 + **/ + UINT8 UnusedUpdSpace3[14]; + + /** Offset 0x00FE + **/ + UINT16 UpdTerminator; +} FSPS_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FsptUpd.h b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FsptUpd.h new file mode 100644 index 0000000000..f06f72bd3f --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FsptUpd.h @@ -0,0 +1,109 @@ +/** @file + +Copyright (c) 2017, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPTUPD_H__ +#define __FSPTUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + +/** Fsp T Core UPD +**/ +typedef struct { + + /** Offset 0x0020 + **/ + UINT32 MicrocodeRegionBase; + + /** Offset 0x0024 + **/ + UINT32 MicrocodeRegionLength; + + /** Offset 0x0028 + **/ + UINT32 CodeRegionBase; + + /** Offset 0x002C + **/ + UINT32 CodeRegionLength; + + /** Offset 0x0030 + **/ + UINT8 Reserved1[16]; +} FSPT_CORE_UPD; + +/** Fsp T Configuration +**/ +typedef struct { + + /** Offset 0x0040 - Disable Port80 output in FSP-T + Select Port80 Control in FSP-T (0:VPD-Style, 1:Enable Port80 Output, + 2:Disable Port80 + Output, refer to FSP Integration Guide for details + 0:VPD-Style, 1:Enable Port80 Output[Default], 2:Disable Port80 Output + **/ + UINT8 PcdFsptPort80RouteDisable; + + /** Offset 0x0041 + **/ + UINT8 ReservedTempRamInitUpd[31]; +} FSPT_CONFIG; + +/** Fsp T UPD Configuration +**/ +typedef struct { + + /** Offset 0x0000 + **/ + FSP_UPD_HEADER FspUpdHeader; + + /** Offset 0x0020 + **/ + FSPT_CORE_UPD FsptCoreUpd; + + /** Offset 0x0040 + **/ + FSPT_CONFIG FsptConfig; + + /** Offset 0x0060 + **/ + UINT8 UnusedUpdSpace0[30]; + + /** Offset 0x007E + **/ + UINT16 UpdTerminator; +} FSPT_UPD; + +#pragma pack() + +#endif |