summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/lippert/roadrunner-lx/Kconfig9
-rw-r--r--src/mainboard/lippert/roadrunner-lx/chip.h9
-rw-r--r--src/mainboard/lippert/roadrunner-lx/mainboard.c11
-rw-r--r--src/mainboard/lippert/roadrunner-lx/romstage.c1
-rw-r--r--src/mainboard/lippert/spacerunner-lx/Kconfig15
-rw-r--r--src/mainboard/lippert/spacerunner-lx/chip.h9
-rw-r--r--src/mainboard/lippert/spacerunner-lx/mainboard.c12
-rw-r--r--src/mainboard/lippert/spacerunner-lx/romstage.c7
8 files changed, 50 insertions, 23 deletions
diff --git a/src/mainboard/lippert/roadrunner-lx/Kconfig b/src/mainboard/lippert/roadrunner-lx/Kconfig
index db492220da..fa140acfce 100644
--- a/src/mainboard/lippert/roadrunner-lx/Kconfig
+++ b/src/mainboard/lippert/roadrunner-lx/Kconfig
@@ -11,6 +11,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select PIRQ_ROUTE
select UDELAY_TSC
select CACHE_AS_RAM
+ # Standard chip is a 512 KB FWH. Replacing it with a 1 MB
+ # SST 49LF008A is possible.
select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR
@@ -29,4 +31,11 @@ config RAMBASE
hex
default 0x4000
+config ONBOARD_UARTS_RS485
+ bool "Switch on-board serial ports to RS485"
+ default n
+ help
+ If selected, both on-board serial ports will operate in RS485 mode
+ instead of RS232.
+
endif # BOARD_LIPPERT_ROADRUNNER_LX
diff --git a/src/mainboard/lippert/roadrunner-lx/chip.h b/src/mainboard/lippert/roadrunner-lx/chip.h
index b201059400..398d42405e 100644
--- a/src/mainboard/lippert/roadrunner-lx/chip.h
+++ b/src/mainboard/lippert/roadrunner-lx/chip.h
@@ -18,13 +18,6 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-/* Based on chip.h from AMD's DB800 mainboard. */
-
-#include <stdint.h>
-
extern struct chip_operations mainboard_ops;
-struct mainboard_config {
- /* bit5 = Live LED, bit2 = RS485_EN2, bit1 = RS485_EN1 */
- u8 sio_gp1x_config;
-};
+struct mainboard_config {};
diff --git a/src/mainboard/lippert/roadrunner-lx/mainboard.c b/src/mainboard/lippert/roadrunner-lx/mainboard.c
index e0d3fa703e..31fdd46e8f 100644
--- a/src/mainboard/lippert/roadrunner-lx/mainboard.c
+++ b/src/mainboard/lippert/roadrunner-lx/mainboard.c
@@ -29,6 +29,13 @@
#include <device/pci_ids.h>
#include "chip.h"
+/* Bit1 switches Com1 to RS485, bit2 same for Com2, bit5 turns off the Live LED. */
+#if CONFIG_ONBOARD_UARTS_RS485
+ #define SIO_GP1X_CONFIG 0x26
+#else
+ #define SIO_GP1X_CONFIG 0x20
+#endif
+
static const u16 ec_init_table[] = { /* hi=data, lo=index */
0x1900, /* Enable monitoring */
0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */
@@ -40,7 +47,6 @@ static const u16 ec_init_table[] = { /* hi=data, lo=index */
static void init(struct device *dev)
{
- struct mainboard_config *mb = dev->chip_info;
unsigned int gpio_base, i;
printk(BIOS_DEBUG, "LiPPERT RoadRunner-LX ENTER %s\n", __func__);
@@ -61,7 +67,8 @@ static void init(struct device *dev)
outb(val >> 8, 0x0296);
}
- outb(mb->sio_gp1x_config, 0x1220); /* Simple-I/O GP17-10 */
+ /* bit5 = Live LED, bit2 = RS485_EN2, bit1 = RS485_EN1 */
+ outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */
printk(BIOS_DEBUG, "LiPPERT RoadRunner-LX EXIT %s\n", __func__);
}
diff --git a/src/mainboard/lippert/roadrunner-lx/romstage.c b/src/mainboard/lippert/roadrunner-lx/romstage.c
index 767b42f2d3..717f51a5ac 100644
--- a/src/mainboard/lippert/roadrunner-lx/romstage.c
+++ b/src/mainboard/lippert/roadrunner-lx/romstage.c
@@ -132,4 +132,3 @@ void main(unsigned long bist)
/* Memory is setup. Return to cache_as_ram.inc and continue to boot. */
return;
}
-
diff --git a/src/mainboard/lippert/spacerunner-lx/Kconfig b/src/mainboard/lippert/spacerunner-lx/Kconfig
index 0f5cde727f..a7e0eba22b 100644
--- a/src/mainboard/lippert/spacerunner-lx/Kconfig
+++ b/src/mainboard/lippert/spacerunner-lx/Kconfig
@@ -12,6 +12,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select PIRQ_ROUTE
select UDELAY_TSC
select CACHE_AS_RAM
+ # Board is equipped with a 1 MB SPI flash, however, due to limitations
+ # of the IT8712F Super I/O, only the top 512 KB are directly mapped.
select BOARD_ROMSIZE_KB_512
config MAINBOARD_DIR
@@ -30,4 +32,17 @@ config RAMBASE
hex
default 0x4000
+config ONBOARD_UARTS_RS485
+ bool "Switch on-board serial ports to RS485"
+ default n
+ help
+ If selected, both on-board serial ports will operate in RS485 mode
+ instead of RS232.
+
+config ONBOARD_IDE_SLAVE
+ bool "Make on-board SSD act as Slave"
+ default n
+ help
+ If selected, the on-board SSD will act as IDE Slave instead of Master.
+
endif # BOARD_LIPPERT_SPACERUNNER_LX
diff --git a/src/mainboard/lippert/spacerunner-lx/chip.h b/src/mainboard/lippert/spacerunner-lx/chip.h
index 422b04ab2b..398d42405e 100644
--- a/src/mainboard/lippert/spacerunner-lx/chip.h
+++ b/src/mainboard/lippert/spacerunner-lx/chip.h
@@ -18,13 +18,6 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-/* Based on chip.h from AMD's DB800 mainboard. */
-
-#include <stdint.h>
-
extern struct chip_operations mainboard_ops;
-struct mainboard_config {
- /* bit2 = RS485_EN2, bit1 = RS485_EN1, bit0 = Live LED */
- u8 sio_gp1x_config;
-};
+struct mainboard_config {};
diff --git a/src/mainboard/lippert/spacerunner-lx/mainboard.c b/src/mainboard/lippert/spacerunner-lx/mainboard.c
index 7977969315..34cd8c40f9 100644
--- a/src/mainboard/lippert/spacerunner-lx/mainboard.c
+++ b/src/mainboard/lippert/spacerunner-lx/mainboard.c
@@ -29,6 +29,13 @@
#include <device/pci_ids.h>
#include "chip.h"
+/* Bit0 turns off the Live LED, bit1 switches Com1 to RS485, bit2 same for Com2. */
+#if CONFIG_ONBOARD_UARTS_RS485
+ #define SIO_GP1X_CONFIG 0x07
+#else
+ #define SIO_GP1X_CONFIG 0x01
+#endif
+
static const u16 ec_init_table[] = { /* hi=data, lo=index */
0x1900, /* Enable monitoring */
0x3050, /* VIN4,5 enabled */
@@ -41,7 +48,6 @@ static const u16 ec_init_table[] = { /* hi=data, lo=index */
static void init(struct device *dev)
{
- struct mainboard_config *mb = dev->chip_info;
unsigned int gpio_base, i;
printk(BIOS_DEBUG, "LiPPERT SpaceRunner-LX ENTER %s\n", __func__);
@@ -65,7 +71,9 @@ static void init(struct device *dev)
outb(val >> 8, 0x0296);
}
- outb(mb->sio_gp1x_config, 0x1220); /* Simple-I/O GP17-10 */
+ /* bit2 = RS485_EN2, bit1 = RS485_EN1, bit0 = Live LED */
+ outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */
+
printk(BIOS_DEBUG, "LiPPERT SpaceRunner-LX EXIT %s\n", __func__);
}
diff --git a/src/mainboard/lippert/spacerunner-lx/romstage.c b/src/mainboard/lippert/spacerunner-lx/romstage.c
index a62ad91c0e..5c640cb021 100644
--- a/src/mainboard/lippert/spacerunner-lx/romstage.c
+++ b/src/mainboard/lippert/spacerunner-lx/romstage.c
@@ -41,7 +41,11 @@
#include "superio/ite/it8712f/it8712f_early_serial.c"
/* Bit0 enables Spread Spectrum, bit1 makes on-board SSD act as IDE slave. */
-#define SMC_CONFIG 0x01
+#if CONFIG_ONBOARD_IDE_SLAVE
+ #define SMC_CONFIG 0x03
+#else
+ #define SMC_CONFIG 0x01
+#endif
#define ManualConf 1 /* No automatic strapped PLL config */
#define PLLMSRhi 0x0000059C /* Manual settings for the PLL */
@@ -201,4 +205,3 @@ void main(unsigned long bist)
/* Memory is setup. Return to cache_as_ram.inc and continue to boot. */
return;
}
-