summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/foxconn/d41s/romstage.c101
-rw-r--r--src/mainboard/intel/d510mo/romstage.c103
-rw-r--r--src/northbridge/intel/pineview/Makefile.inc1
-rw-r--r--src/northbridge/intel/pineview/pineview.h5
-rw-r--r--src/northbridge/intel/pineview/romstage.c120
5 files changed, 139 insertions, 191 deletions
diff --git a/src/mainboard/foxconn/d41s/romstage.c b/src/mainboard/foxconn/d41s/romstage.c
index cde813c159..ade85e66a5 100644
--- a/src/mainboard/foxconn/d41s/romstage.c
+++ b/src/mainboard/foxconn/d41s/romstage.c
@@ -15,44 +15,16 @@
* GNU General Public License for more details.
*/
-#include <stdint.h>
-#include <stdlib.h>
-#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
-#include <console/console.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
-#include <southbridge/intel/common/gpio.h>
-#include <northbridge/intel/pineview/raminit.h>
#include <northbridge/intel/pineview/pineview.h>
-#include <cpu/x86/bist.h>
-#include <cpu/intel/romstage.h>
-#include <cpu/x86/lapic.h>
#include <superio/ite/common/ite.h>
#include <superio/ite/it8721f/it8721f.h>
-#include <lib.h>
-#include <cbmem.h>
-#include <romstage_handoff.h>
-#include <timestamp.h>
#define SERIAL_DEV PNP_DEV(0x2e, IT8721F_SP1)
-/* Early mainboard specific GPIO setup */
-static void mb_gpio_init(void)
-{
- pci_devfn_t dev;
-
- /* Southbridge GPIOs. */
- dev = PCI_DEV(0x0, 0x1f, 0x0);
-
- /* Set the value for GPIO base address register and enable GPIO. */
- pci_write_config32(dev, GPIO_BASE, (DEFAULT_GPIOBASE | 1));
- pci_write_config8(dev, GPIO_CNTL, 0x10);
-
- setup_pch_gpios(&mainboard_gpio_map);
-}
-
-static void nm10_enable_lpc(void)
+void mb_enable_lpc(void)
{
/* Disable Serial IRQ */
pci_write_config8(PCI_DEV(0, 0x1f, 0), SERIRQ_CNTL, 0xd0);
@@ -65,75 +37,12 @@ static void nm10_enable_lpc(void)
/* Environment Controller */
pci_write_config32(PCI_DEV(0, 0x1f, 0), GEN1_DEC, 0x00fc0a01);
-}
-static void rcba_config(void)
-{
- /* Set up virtual channel 0 */
- RCBA32(0x0014) = 0x80000001;
- RCBA32(0x001c) = 0x03128010;
-
- /* Enable IOAPIC */
- RCBA8(OIC) = 0x03;
+ ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
}
-void mainboard_romstage_entry(unsigned long bist)
+void get_mb_spd_addrmap(u8 *spd_addrmap)
{
- const u8 spd_addrmap[4] = { 0x50, 0x51, 0, 0 };
- int cbmem_was_initted;
- int s3resume = 0;
- int boot_path;
-
- if (bist == 0)
- enable_lapic();
-
- /* Disable watchdog timer */
- RCBA32(GCS) = RCBA32(GCS) | 0x20;
-
- /* Set southbridge and Super I/O GPIOs. */
- mb_gpio_init();
-
- nm10_enable_lpc();
- ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- console_init();
-
- report_bist_failure(bist);
- enable_smbus();
-
- pineview_early_initialization();
-
- post_code(0x30);
-
- s3resume = southbridge_detect_s3_resume();
-
- if (s3resume) {
- boot_path = BOOT_PATH_RESUME;
- } else {
- if (MCHBAR32(0xf14) & (1 << 8)) /* HOT RESET */
- boot_path = BOOT_PATH_RESET;
- else
- boot_path = BOOT_PATH_NORMAL;
- }
-
- printk(BIOS_DEBUG, "Initializing memory\n");
- timestamp_add_now(TS_BEFORE_INITRAM);
- sdram_initialize(boot_path, spd_addrmap);
- timestamp_add_now(TS_AFTER_INITRAM);
- printk(BIOS_DEBUG, "Memory initialized\n");
-
- post_code(0x31);
-
- quick_ram_check();
-
- rcba_config();
-
- cbmem_was_initted = !cbmem_recovery(s3resume);
-
- if (!cbmem_was_initted && s3resume) {
- /* Failed S3 resume, reset to come up cleanly */
- outb(0x6, 0xcf9);
- halt();
- }
-
- romstage_handoff_init(s3resume);
+ spd_addrmap[0] = 0x50;
+ spd_addrmap[1] = 0x51;
}
diff --git a/src/mainboard/intel/d510mo/romstage.c b/src/mainboard/intel/d510mo/romstage.c
index 8648e20de0..28e2e25999 100644
--- a/src/mainboard/intel/d510mo/romstage.c
+++ b/src/mainboard/intel/d510mo/romstage.c
@@ -14,45 +14,17 @@
* GNU General Public License for more details.
*/
-#include <stdint.h>
-#include <stdlib.h>
-#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
-#include <console/console.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
-#include <southbridge/intel/common/gpio.h>
-#include <northbridge/intel/pineview/raminit.h>
#include <northbridge/intel/pineview/pineview.h>
-#include <cpu/x86/bist.h>
-#include <cpu/intel/romstage.h>
-#include <cpu/x86/lapic.h>
#include <superio/winbond/w83627thg/w83627thg.h>
#include <superio/winbond/common/winbond.h>
-#include <lib.h>
-#include <cbmem.h>
-#include <romstage_handoff.h>
-#include <timestamp.h>
#define SERIAL_DEV PNP_DEV(0x4e, W83627THG_SP1)
#define SUPERIO_DEV PNP_DEV(0x4e, 0)
-/* Early mainboard specific GPIO setup */
-static void mb_gpio_init(void)
-{
- pci_devfn_t dev;
-
- /* Southbridge GPIOs. */
- dev = PCI_DEV(0x0, 0x1f, 0x0);
-
- /* Set the value for GPIO base address register and enable GPIO. */
- pci_write_config32(dev, GPIO_BASE, (DEFAULT_GPIOBASE | 1));
- pci_write_config8(dev, GPIO_CNTL, 0x10);
-
- setup_pch_gpios(&mainboard_gpio_map);
-}
-
-static void nm10_enable_lpc(void)
+void mb_enable_lpc(void)
{
/* Disable Serial IRQ */
pci_write_config8(PCI_DEV(0, 0x1f, 0), SERIRQ_CNTL, 0x00);
@@ -64,14 +36,12 @@ static void nm10_enable_lpc(void)
| COMB_LPC_EN);
pci_write_config32(PCI_DEV(0, 0x1f, 0), GEN2_DEC, 0x7c0291);
+
+ winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
}
-static void rcba_config(void)
+void mb_pirq_setup(void)
{
- /* Set up virtual channel 0 */
- RCBA32(0x0014) = 0x80000001;
- RCBA32(0x001c) = 0x03128010;
-
/* dev irq route register */
RCBA16(D31IR) = 0x0132;
RCBA16(D30IR) = 0x0146;
@@ -79,69 +49,12 @@ static void rcba_config(void)
RCBA16(D28IR) = 0x3201;
RCBA16(D27IR) = 0x0146;
- /* Enable IOAPIC */
- RCBA8(OIC) = 0x03;
-
+ /* Does not belong here, but is it needed? */
RCBA32(FD) |= FD_INTLAN;
}
-void mainboard_romstage_entry(unsigned long bist)
+void get_mb_spd_addrmap(u8 *spd_addrmap)
{
- const u8 spd_addrmap[4] = { 0x50, 0x51, 0, 0 };
- int cbmem_was_initted;
- int s3resume = 0;
- int boot_path;
-
- if (bist == 0)
- enable_lapic();
-
- /* Disable watchdog timer */
- RCBA32(GCS) = RCBA32(GCS) | 0x20;
-
- /* Set southbridge and Super I/O GPIOs. */
- mb_gpio_init();
-
- nm10_enable_lpc();
- winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- console_init();
-
- report_bist_failure(bist);
- enable_smbus();
-
- pineview_early_initialization();
-
- post_code(0x30);
-
- s3resume = southbridge_detect_s3_resume();
-
- if (s3resume) {
- boot_path = BOOT_PATH_RESUME;
- } else {
- if (MCHBAR32(0xf14) & (1 << 8)) /* HOT RESET */
- boot_path = BOOT_PATH_RESET;
- else
- boot_path = BOOT_PATH_NORMAL;
- }
-
- printk(BIOS_DEBUG, "Initializing memory\n");
- timestamp_add_now(TS_BEFORE_INITRAM);
- sdram_initialize(boot_path, spd_addrmap);
- timestamp_add_now(TS_AFTER_INITRAM);
- printk(BIOS_DEBUG, "Memory initialized\n");
-
- post_code(0x31);
-
- quick_ram_check();
-
- rcba_config();
-
- cbmem_was_initted = !cbmem_recovery(s3resume);
-
- if (!cbmem_was_initted && s3resume) {
- /* Failed S3 resume, reset to come up cleanly */
- outb(0x6, 0xcf9);
- halt();
- }
-
- romstage_handoff_init(s3resume);
+ spd_addrmap[0] = 0x50;
+ spd_addrmap[1] = 0x51;
}
diff --git a/src/northbridge/intel/pineview/Makefile.inc b/src/northbridge/intel/pineview/Makefile.inc
index d7936c1fbf..524bcae372 100644
--- a/src/northbridge/intel/pineview/Makefile.inc
+++ b/src/northbridge/intel/pineview/Makefile.inc
@@ -21,6 +21,7 @@ ramstage-y += northbridge.c
ramstage-y += gma.c
ramstage-y += acpi.c
+romstage-y += romstage.c
romstage-y += ram_calc.c
romstage-y += raminit.c
romstage-y += early_init.c
diff --git a/src/northbridge/intel/pineview/pineview.h b/src/northbridge/intel/pineview/pineview.h
index 8c32e17113..65d21cfb8d 100644
--- a/src/northbridge/intel/pineview/pineview.h
+++ b/src/northbridge/intel/pineview/pineview.h
@@ -235,6 +235,11 @@ u32 decode_igd_memory_size(const u32 gms);
u32 decode_igd_gtt_size(const u32 gsm);
u8 decode_pciebar(u32 *const base, u32 *const len);
+/* Mainboard romstage callback functions */
+void mb_enable_lpc(void);
+void get_mb_spd_addrmap(u8 *spd_addr_map);
+void mb_pirq_setup(void); /* optional */
+
struct acpi_rsdp;
unsigned long northbridge_write_acpi_tables(unsigned long start, struct acpi_rsdp *rsdp);
diff --git a/src/northbridge/intel/pineview/romstage.c b/src/northbridge/intel/pineview/romstage.c
new file mode 100644
index 0000000000..10ac0f53b4
--- /dev/null
+++ b/src/northbridge/intel/pineview/romstage.c
@@ -0,0 +1,120 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Damien Zammit <damien@zamaudio.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* Platform has no romstage entry point under mainboard directory,
+ * so this one is named with prefix mainboard.
+ */
+
+#include <lib.h>
+#include <timestamp.h>
+#include <console/console.h>
+#include <cbmem.h>
+#include <romstage_handoff.h>
+#include <southbridge/intel/i82801gx/i82801gx.h>
+#include <southbridge/intel/common/gpio.h>
+#include <cpu/intel/romstage.h>
+#include <cpu/x86/bist.h>
+#include <cpu/x86/lapic.h>
+#include "raminit.h"
+#include "pineview.h"
+
+static void rcba_config(void)
+{
+ /* Set up virtual channel 0 */
+ RCBA32(0x0014) = 0x80000001;
+ RCBA32(0x001c) = 0x03128010;
+
+ /* Enable IOAPIC */
+ RCBA8(OIC) = 0x03;
+}
+
+__weak void mb_pirq_setup(void)
+{
+}
+
+#define LPC_DEV PCI_DEV(0x0, 0x1f, 0x0)
+
+void mainboard_romstage_entry(unsigned long bist)
+{
+ u8 spd_addrmap[4] = {};
+ int boot_path, cbmem_was_initted;
+ int s3resume = 0;
+
+ if (bist == 0)
+ enable_lapic();
+
+ /* Disable watchdog timer */
+ RCBA32(GCS) = RCBA32(GCS) | 0x20;
+
+ /* Enable GPIOs */
+ pci_write_config32(LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1);
+ pci_write_config8(LPC_DEV, GPIO_CNTL, 0x10);
+
+ setup_pch_gpios(&mainboard_gpio_map);
+
+ mb_enable_lpc(); // nm10_enable_lpc
+
+ /* Initialize console device(s) */
+ console_init();
+
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
+ enable_smbus();
+
+ /* Perform some early chipset initialization required
+ * before RAM initialization can work
+ */
+ pineview_early_initialization();
+
+ post_code(0x30);
+
+ s3resume = southbridge_detect_s3_resume();
+
+ if (s3resume) {
+ boot_path = BOOT_PATH_RESUME;
+ } else {
+ if (MCHBAR32(0xf14) & (1 << 8)) /* HOT RESET */
+ boot_path = BOOT_PATH_RESET;
+ else
+ boot_path = BOOT_PATH_NORMAL;
+ }
+
+ get_mb_spd_addrmap(&spd_addrmap[0]);
+
+ printk(BIOS_DEBUG, "Initializing memory\n");
+ timestamp_add_now(TS_BEFORE_INITRAM);
+ sdram_initialize(boot_path, spd_addrmap);
+ timestamp_add_now(TS_AFTER_INITRAM);
+ printk(BIOS_DEBUG, "Memory initialized\n");
+
+ post_code(0x31);
+
+ quick_ram_check();
+
+ mb_pirq_setup();
+
+ rcba_config();
+
+ cbmem_was_initted = !cbmem_recovery(s3resume);
+
+ if (!cbmem_was_initted && s3resume) {
+ /* Failed S3 resume, reset to come up cleanly */
+ outb(0x6, 0xcf9);
+ halt();
+ }
+
+ romstage_handoff_init(s3resume);
+}