summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/purism/librem_whl/Kconfig62
-rw-r--r--src/mainboard/purism/librem_whl/Kconfig.name3
-rw-r--r--src/mainboard/purism/librem_whl/Makefile.inc7
-rw-r--r--src/mainboard/purism/librem_whl/acpi/mainboard.asl16
-rw-r--r--src/mainboard/purism/librem_whl/board_info.txt8
-rw-r--r--src/mainboard/purism/librem_whl/devicetree.cb317
-rw-r--r--src/mainboard/purism/librem_whl/dsdt.asl26
-rw-r--r--src/mainboard/purism/librem_whl/ramstage.c16
-rw-r--r--src/mainboard/purism/librem_whl/romstage.c52
-rw-r--r--src/mainboard/purism/librem_whl/variants/librem_mini/data.vbtbin0 -> 4608 bytes
-rw-r--r--src/mainboard/purism/librem_whl/variants/librem_mini/gpio.c229
-rw-r--r--src/mainboard/purism/librem_whl/variants/librem_mini/hda_verb.c33
-rw-r--r--src/mainboard/purism/librem_whl/variants/librem_mini/include/variant/gpio.h11
13 files changed, 780 insertions, 0 deletions
diff --git a/src/mainboard/purism/librem_whl/Kconfig b/src/mainboard/purism/librem_whl/Kconfig
new file mode 100644
index 0000000000..bc25fb5b3b
--- /dev/null
+++ b/src/mainboard/purism/librem_whl/Kconfig
@@ -0,0 +1,62 @@
+config BOARD_PURISM_BASEBOARD_LIBREM_WHL
+ def_bool n
+ select BOARD_ROMSIZE_KB_16384
+ select DRIVERS_GENERIC_CBFS_SERIAL
+ select DRIVERS_USB_ACPI
+ select HAVE_ACPI_RESUME
+ select HAVE_ACPI_TABLES
+ select INTEL_GMA_HAVE_VBT
+ select NO_UART_ON_SUPERIO
+ select SOC_INTEL_COMMON_BLOCK_HDA
+ select SOC_INTEL_COMMON_BLOCK_HDA_VERB
+ select SOC_INTEL_WHISKEYLAKE
+ select SPD_READ_BY_WORD
+ select USE_LEGACY_8254_TIMER
+
+if BOARD_PURISM_BASEBOARD_LIBREM_WHL
+
+config MAINBOARD_DIR
+ string
+ default "purism/librem_whl"
+
+config MAINBOARD_FAMILY
+ string
+ default "Librem Mini" if BOARD_PURISM_LIBREM_MINI
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "Librem Mini" if BOARD_PURISM_LIBREM_MINI
+
+config VARIANT_DIR
+ string
+ default "librem_mini" if BOARD_PURISM_LIBREM_MINI
+
+config CBFS_SIZE
+ hex
+ default 0x800000
+
+config MAX_CPUS
+ int
+ default 8
+
+config DIMM_MAX
+ int
+ default 2
+
+config DIMM_SPD_SIZE
+ int
+ default 512
+
+config VGA_BIOS_ID
+ string
+ default "8086,3ea0"
+
+config PXE_ROM_ID
+ string
+ default "10ec,8168"
+
+# This platform has limited means to display POST codes
+config NO_POST
+ default y
+
+endif
diff --git a/src/mainboard/purism/librem_whl/Kconfig.name b/src/mainboard/purism/librem_whl/Kconfig.name
new file mode 100644
index 0000000000..41a4003102
--- /dev/null
+++ b/src/mainboard/purism/librem_whl/Kconfig.name
@@ -0,0 +1,3 @@
+config BOARD_PURISM_LIBREM_MINI
+ bool "Librem Mini"
+ select BOARD_PURISM_BASEBOARD_LIBREM_WHL
diff --git a/src/mainboard/purism/librem_whl/Makefile.inc b/src/mainboard/purism/librem_whl/Makefile.inc
new file mode 100644
index 0000000000..ba157dfd05
--- /dev/null
+++ b/src/mainboard/purism/librem_whl/Makefile.inc
@@ -0,0 +1,7 @@
+## SPDX-License-Identifier: GPL-2.0-only
+
+ramstage-y += variants/$(VARIANT_DIR)/gpio.c
+ramstage-y += variants/$(VARIANT_DIR)/hda_verb.c
+ramstage-y += ramstage.c
+
+CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/include
diff --git a/src/mainboard/purism/librem_whl/acpi/mainboard.asl b/src/mainboard/purism/librem_whl/acpi/mainboard.asl
new file mode 100644
index 0000000000..0c9a76b168
--- /dev/null
+++ b/src/mainboard/purism/librem_whl/acpi/mainboard.asl
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+Scope (\_SB.PCI0.LPCB)
+{
+ Device (AC)
+ {
+ Name (_HID, "ACPI0003")
+ Name (_PCL, Package () { LPCB })
+ Name (ACFG, One)
+
+ Method (_PSR, 0, NotSerialized)
+ {
+ Return (ACFG)
+ }
+ }
+}
diff --git a/src/mainboard/purism/librem_whl/board_info.txt b/src/mainboard/purism/librem_whl/board_info.txt
new file mode 100644
index 0000000000..e72dcdf2b7
--- /dev/null
+++ b/src/mainboard/purism/librem_whl/board_info.txt
@@ -0,0 +1,8 @@
+Vendor name: Purism
+Board name: librem_whl
+Category: desktop
+Release year: 2020
+ROM package: SOIC-8
+ROM protocol: SPI
+ROM socketed: n
+Flashrom support: y
diff --git a/src/mainboard/purism/librem_whl/devicetree.cb b/src/mainboard/purism/librem_whl/devicetree.cb
new file mode 100644
index 0000000000..c122bb8982
--- /dev/null
+++ b/src/mainboard/purism/librem_whl/devicetree.cb
@@ -0,0 +1,317 @@
+chip soc/intel/cannonlake
+ # Lock Down
+ register "common_soc_config" = "{
+ .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
+ }"
+
+ # Send an extra VR mailbox command for the PS4 exit issue
+ register "SendVrMbxCmd" = "2"
+
+# ACPI (soc/intel/cannonlake/acpi.c)
+ # Disable s0ix
+ register "s0ix_enable" = "0"
+
+ # PM Timer Enabled
+ register "PmTimerDisabled" = "0"
+
+ # Disable DPTF
+ register "dptf_enable" = "0"
+
+# CPU (soc/intel/cannonlake/cpu.c)
+ # Power limit
+ register "power_limits_config" = "{
+ .tdp_pl1_override = 25,
+ .tdp_pl2_override = 28,
+ }"
+
+ # Enable "Intel Speed Shift Technology"
+ register "speed_shift_enable" = "1"
+
+ # Enable Enhanced Intel SpeedStep
+ register "eist_enable" = "1"
+
+# FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c)
+ register "SaGv" = "SaGv_Enabled"
+
+# FSP Silicon (soc/intel/cannonlake/fsp_params.c)
+ # Serial I/O
+ register "SerialIoDevMode" = "{
+ [PchSerialIoIndexI2C0] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C1] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C2] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C3] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C4] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C5] = PchSerialIoDisabled,
+ [PchSerialIoIndexSPI0] = PchSerialIoDisabled,
+ [PchSerialIoIndexSPI1] = PchSerialIoDisabled,
+ [PchSerialIoIndexSPI2] = PchSerialIoDisabled,
+ [PchSerialIoIndexUART0] = PchSerialIoDisabled,
+ [PchSerialIoIndexUART1] = PchSerialIoDisabled,
+ [PchSerialIoIndexUART2] = PchSerialIoDisabled,
+ }"
+
+ # SATA
+ register "SataMode" = "Sata_AHCI"
+ register "SataSalpSupport" = "0"
+ register "SataPortsEnable[0]" = "1" # 2.5"
+ register "SataPortsEnable[2]" = "1" # m.2
+ register "SataPortsDevSlp[0]" = "0"
+ register "SataPortsDevSlp[2]" = "0"
+
+ # Audio
+ register "PchHdaDspEnable" = "0"
+ register "PchHdaAudioLinkHda" = "1"
+ register "PchHdaAudioLinkDmic0" = "0"
+ register "PchHdaAudioLinkDmic1" = "0"
+ register "PchHdaAudioLinkSsp0" = "0"
+ register "PchHdaAudioLinkSsp1" = "0"
+ register "PchHdaAudioLinkSsp2" = "0"
+ register "PchHdaAudioLinkSndw1" = "0"
+ register "PchHdaAudioLinkSndw2" = "0"
+ register "PchHdaAudioLinkSndw3" = "0"
+ register "PchHdaAudioLinkSndw4" = "0"
+
+ # USB
+ register "SsicPortEnable" = "0"
+
+ # USB2
+ register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-A front left upper
+ register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-A front left lower
+ register "usb2_ports[2]" = "USB2_PORT_MID(OC2)" # Type-A rear upper
+ register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Type-A front right lower
+ register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # Type-A front right upper
+ register "usb2_ports[5]" = "USB2_PORT_TYPE_C(OC3)" # Type-C rear
+ register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # m.2-2230/Bluetooth
+ register "usb2_ports[7]" = "USB2_PORT_EMPTY" # NC
+ register "usb2_ports[8]" = "USB2_PORT_EMPTY" # NC
+ register "usb2_ports[9]" = "USB2_PORT_MID(OC2)" # Type-A rear lower
+ register "usb2_ports[10]" = "USB2_PORT_EMPTY" # NC
+ register "usb2_ports[11]" = "USB2_PORT_EMPTY" # NC
+ register "usb2_ports[12]" = "USB2_PORT_EMPTY" # NC
+ register "usb2_ports[13]" = "USB2_PORT_EMPTY" # NC
+ register "usb2_ports[14]" = "USB2_PORT_EMPTY" # NC
+ register "usb2_ports[15]" = "USB2_PORT_EMPTY" # NC
+
+ # USB3
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A front left upper
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A front left lower
+ register "usb3_ports[2]" = "USB3_PORT_EMPTY" # NC
+ register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-C rear
+ register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC2)" # Type-A rear lower
+ register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC2)" # Type-A rear upper
+ register "usb3_ports[6]" = "USB3_PORT_EMPTY" # NC
+ register "usb3_ports[7]" = "USB3_PORT_EMPTY" # NC
+ register "usb3_ports[8]" = "USB3_PORT_EMPTY" # NC
+ register "usb3_ports[9]" = "USB3_PORT_EMPTY" # NC
+
+ # All SRCCLKREQ pins mapped directly
+ register "PcieClkSrcClkReq[0]" = "0"
+ register "PcieClkSrcClkReq[1]" = "1"
+ register "PcieClkSrcClkReq[2]" = "2"
+ register "PcieClkSrcClkReq[3]" = "3"
+ register "PcieClkSrcClkReq[4]" = "4"
+ register "PcieClkSrcClkReq[5]" = "5"
+
+ # Set all SRCCLKREQ pins as free-use
+ register "PcieClkSrcUsage[0]" = "0x80"
+ register "PcieClkSrcUsage[1]" = "0x80"
+ register "PcieClkSrcUsage[2]" = "0x80"
+ register "PcieClkSrcUsage[3]" = "0x80"
+ register "PcieClkSrcUsage[4]" = "0x80"
+ register "PcieClkSrcUsage[5]" = "0x80"
+
+ # PCI Express Root Port #8 x1, Clock 2 (WLAN)
+ register "PcieRpEnable[7]" = "1"
+ register "PcieRpLtrEnable[7]" = "1"
+
+ # PCI Express Root Port #10 x1, Clock 3 (LAN)
+ register "PcieRpEnable[9]" = "1"
+ register "PcieRpLtrEnable[9]" = "0"
+
+ # PCI Express Root port #13 x4, Clock 1 (NVMe)
+ register "PcieRpEnable[12]" = "1"
+ register "PcieRpLtrEnable[12]" = "1"
+
+ # Misc
+ register "AcousticNoiseMitigation" = "1"
+ register "satapwroptimize" = "1"
+
+ # Power
+ register "PchPmSlpS3MinAssert" = "3" # 50ms
+ register "PchPmSlpS4MinAssert" = "1" # 1s
+ register "PchPmSlpSusMinAssert" = "2" # 500ms
+ register "PchPmSlpAMinAssert" = "4" # 2s
+
+ # Thermal
+ register "tcc_offset" = "12"
+
+ # Serial IRQ Mode
+ register "serirq_mode" = "SERIRQ_CONTINUOUS"
+
+# PMC (soc/intel/cannonlake/pmc.c)
+ # Disable deep Sx states
+ register "deep_sx_config" = "0"
+
+# PM Util (soc/intel/cannonlake/pmutil.c)
+ # GPE configuration
+ # Note that GPE events called out in ASL code rely on this
+ # route. i.e. If this route changes then the affected GPE
+ # offset bits also need to be changed.
+ # sudo devmem2 0xfe001920 (pmc_bar + GPIO_GPE_CFG)
+ register "gpe0_dw0" = "PMC_GPP_C"
+ register "gpe0_dw1" = "PMC_GPP_D"
+ register "gpe0_dw2" = "PMC_GPP_E"
+
+# Actual device tree
+ device cpu_cluster 0 on
+ device lapic 0 on end
+ end
+
+ device domain 0 on
+ device pci 00.0 on end # Host Bridge
+ device pci 02.0 on end # Integrated Graphics Device
+ device pci 04.0 on # SA Thermal device
+ register "Device4Enable" = "1"
+ end
+ device pci 12.0 on end # Thermal Subsystem
+ device pci 13.0 off end # Integrated Sensor Hub
+ device pci 14.0 on # USB xHCI
+ chip drivers/usb/acpi
+ device usb 0.0 on
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Front Left Upper""
+ register "type" = "UPC_TYPE_A"
+ register "group" = "ACPI_PLD_GROUP(0, 0)"
+ device usb 2.0 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Front Left Lower""
+ register "type" = "UPC_TYPE_A"
+ register "group" = "ACPI_PLD_GROUP(0, 1)"
+ device usb 2.1 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Rear Upper""
+ register "type" = "UPC_TYPE_A"
+ register "group" = "ACPI_PLD_GROUP(1, 0)"
+ device usb 2.2 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Front Right Lower""
+ register "type" = "UPC_TYPE_A"
+ register "group" = "ACPI_PLD_GROUP(0, 2)"
+ device usb 2.3 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Front Right Upper""
+ register "type" = "UPC_TYPE_A"
+ register "group" = "ACPI_PLD_GROUP(0, 3)"
+ device usb 2.4 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-C Port Rear""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "group" = "ACPI_PLD_GROUP(1, 2)"
+ device usb 2.5 on end
+ end
+ chip drivers/usb/acpi
+ device usb 2.6 off end
+ end
+ chip drivers/usb/acpi
+ device usb 2.7 off end
+ end
+ chip drivers/usb/acpi
+ device usb 2.8 off end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Rear Lower""
+ register "type" = "UPC_TYPE_A"
+ register "group" = "ACPI_PLD_GROUP(1, 1)"
+ device usb 2.9 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-A Front Left Upper""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "group" = "ACPI_PLD_GROUP(0, 0)"
+ device usb 3.0 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-A Front Left Lower""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "group" = "ACPI_PLD_GROUP(0, 1)"
+ device usb 3.1 on end
+ end
+ chip drivers/usb/acpi
+ device usb 3.2 off end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-C Rear""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "group" = "ACPI_PLD_GROUP(1, 2)"
+ device usb 3.3 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-A Rear Lower""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "group" = "ACPI_PLD_GROUP(1, 1)"
+ device usb 3.4 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-A Rear Upper""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "group" = "ACPI_PLD_GROUP(1, 0)"
+ device usb 3.5 on end
+ end
+ end
+ end
+ end
+ device pci 14.1 off end # USB xDCI (OTG)
+ device pci 15.0 off end # I2C #0
+ device pci 15.1 off end # I2C #1
+ device pci 15.2 off end # I2C #2
+ device pci 15.3 off end # I2C #3
+ device pci 16.0 off # Management Engine Interface 1
+ # HECI must be enabled w/HAP disable else S3 issues
+ register "HeciEnabled" = "1"
+ end
+ device pci 16.1 off end # Management Engine Interface 2
+ device pci 16.2 off end # Management Engine IDE-R
+ device pci 16.3 off end # Management Engine KT Redirection
+ device pci 16.4 off # Management Engine Interface 3
+ register "Heci3Enabled" = "0"
+ end
+ device pci 16.5 off end # Management Engine Interface 4
+ device pci 17.0 on end # SATA
+ device pci 19.0 off end # I2C #4
+ device pci 19.1 off end # I2C #5
+ device pci 19.2 off end # UART #2
+ device pci 1a.0 off end # eMMC
+ device pci 1c.0 off end # PCI Express Port 1
+ device pci 1c.1 off end # PCI Express Port 2
+ device pci 1c.2 off end # PCI Express Port 3
+ device pci 1c.3 off end # PCI Express Port 4
+ device pci 1c.4 off end # PCI Express Port 5
+ device pci 1c.5 off end # PCI Express Port 6
+ device pci 1c.6 off end # PCI Express Port 7
+ device pci 1c.7 on end # PCI Express Port 8 (WLAN)
+ device pci 1d.0 off end # PCI Express Port 9
+ device pci 1d.1 on end # PCI Express Port 10 (LAN)
+ device pci 1d.2 off end # PCI Express Port 11
+ device pci 1d.3 off end # PCI Express Port 12
+ device pci 1d.4 on end # PCI Express Port 13 (NVMe)
+ device pci 1d.5 off end # PCI Express Port 14
+ device pci 1d.6 off end # PCI Express Port 15
+ device pci 1d.7 off end # PCI Express Port 16
+ device pci 1e.0 off end # UART #0
+ device pci 1e.1 off end # UART #1
+ device pci 1e.2 off end # GSPI #0
+ device pci 1e.3 off end # GSPI #1
+ device pci 1f.0 on end # LPC Bridge
+ device pci 1f.1 off end # P2SB
+ device pci 1f.2 off end # Power Management Controller
+ device pci 1f.3 on end # Intel HDA
+ device pci 1f.4 on end # SMBus
+ device pci 1f.5 on end # PCH SPI
+ device pci 1f.6 off end # GbE
+ end
+end
diff --git a/src/mainboard/purism/librem_whl/dsdt.asl b/src/mainboard/purism/librem_whl/dsdt.asl
new file mode 100644
index 0000000000..296be17b35
--- /dev/null
+++ b/src/mainboard/purism/librem_whl/dsdt.asl
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <acpi/acpi.h>
+DefinitionBlock(
+ "dsdt.aml",
+ "DSDT",
+ 0x02, /* DSDT revision: ACPI v2.0 and up */
+ OEM_ID,
+ ACPI_TABLE_CREATOR,
+ 0x20110725 /* OEM revision */
+)
+{
+ #include <soc/intel/cannonlake/acpi/platform.asl>
+ #include <soc/intel/common/block/acpi/acpi/globalnvs.asl>
+ #include <cpu/intel/common/acpi/cpu.asl>
+
+ Device (\_SB.PCI0)
+ {
+ #include <soc/intel/common/block/acpi/acpi/northbridge.asl>
+ #include <soc/intel/cannonlake/acpi/southbridge.asl>
+ }
+
+ #include <southbridge/intel/common/acpi/sleepstates.asl>
+
+ #include "acpi/mainboard.asl"
+}
diff --git a/src/mainboard/purism/librem_whl/ramstage.c b/src/mainboard/purism/librem_whl/ramstage.c
new file mode 100644
index 0000000000..07ede66505
--- /dev/null
+++ b/src/mainboard/purism/librem_whl/ramstage.c
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <soc/ramstage.h>
+#include <variant/gpio.h>
+
+void mainboard_silicon_init_params(FSP_S_CONFIG *params)
+{
+ /* Configure pads prior to SiliconInit() in case there's any
+ * dependencies during hardware initialization. */
+ size_t num_gpios;
+ const struct pad_config *gpio_table = variant_gpio_table(&num_gpios);
+ cnl_configure_pads(gpio_table, num_gpios);
+
+ /* Limit SATA speed to 3Gbps until correct HSIO PHY settings determined */
+ params->SataSpeedLimit = 2;
+}
diff --git a/src/mainboard/purism/librem_whl/romstage.c b/src/mainboard/purism/librem_whl/romstage.c
new file mode 100644
index 0000000000..9f8d600950
--- /dev/null
+++ b/src/mainboard/purism/librem_whl/romstage.c
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <soc/cnl_memcfg_init.h>
+#include <soc/romstage.h>
+
+static const struct cnl_mb_cfg memcfg = {
+
+ /* Parameters required to access SPD for CH0D0/CH0D1/CH1D0/CH1D1. */
+ .spd[0] = {
+ .read_type = READ_SMBUS,
+ .spd_spec = {.spd_smbus_address = 0xa0},
+ },
+ .spd[1] = {.read_type = NOT_EXISTING},
+ .spd[2] = {
+ .read_type = READ_SMBUS,
+ .spd_spec = {.spd_smbus_address = 0xa4},
+ },
+ .spd[3] = {.read_type = NOT_EXISTING},
+
+ /*
+ * Rcomp resistor values. These values represent the resistance in
+ * ohms of the three rcomp resistors attached to the DDR_COMP_0,
+ * DDR_COMP_1, and DDR_COMP_2 pins on the DRAM.
+ */
+ .rcomp_resistor = { 121, 81, 100 },
+
+ /* Rcomp target values */
+ .rcomp_targets = { 100, 40, 20, 20, 26 },
+
+ /*
+ * Indicates whether memory is interleaved.
+ * Set to 1 for an interleaved design,
+ * set to 0 for non-interleaved design.
+ */
+ .dq_pins_interleaved = 1,
+
+ /*
+ * VREF_CA configuration.
+ * Set to 0 VREF_CA goes to both CH_A and CH_B,
+ * set to 1 VREF_CA goes to CH_A and VREF_DQ_A goes to CH_B,
+ * set to 2 VREF_CA goes to CH_A and VREF_DQ_B goes to CH_B.
+ */
+ .vref_ca_config = 2,
+
+ /* Early Command Training */
+ .ect = 0,
+};
+
+void mainboard_memory_init_params(FSPM_UPD *memupd)
+{
+ cannonlake_memcfg_init(&memupd->FspmConfig, &memcfg);
+}
diff --git a/src/mainboard/purism/librem_whl/variants/librem_mini/data.vbt b/src/mainboard/purism/librem_whl/variants/librem_mini/data.vbt
new file mode 100644
index 0000000000..2e657d1a9f
--- /dev/null
+++ b/src/mainboard/purism/librem_whl/variants/librem_mini/data.vbt
Binary files differ
diff --git a/src/mainboard/purism/librem_whl/variants/librem_mini/gpio.c b/src/mainboard/purism/librem_whl/variants/librem_mini/gpio.c
new file mode 100644
index 0000000000..492d978d45
--- /dev/null
+++ b/src/mainboard/purism/librem_whl/variants/librem_mini/gpio.c
@@ -0,0 +1,229 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <variant/gpio.h>
+
+/* Pad configuration in ramstage. */
+static const struct pad_config gpio_table[] = {
+
+ /* ------- GPIO Group GPP_A ------- */
+
+ _PAD_CFG_STRUCT(GPP_A0, 0x44000702, 0x0000), /* RCIN# */
+ _PAD_CFG_STRUCT(GPP_A1, 0x44000702, 0x3c00), /* LAD0 */
+ _PAD_CFG_STRUCT(GPP_A2, 0x44000702, 0x3c00), /* LAD1 */
+ _PAD_CFG_STRUCT(GPP_A3, 0x44000702, 0x3c00), /* LAD2 */
+ _PAD_CFG_STRUCT(GPP_A4, 0x44000702, 0x3c00), /* LAD3 */
+ _PAD_CFG_STRUCT(GPP_A5, 0x44000700, 0x0000), /* LFRAME# */
+ _PAD_CFG_STRUCT(GPP_A6, 0x44000700, 0x0000), /* SERIRQ */
+ _PAD_CFG_STRUCT(GPP_A7, 0x84000200, 0x0000), /* PIRQA# */
+ _PAD_CFG_STRUCT(GPP_A8, 0x44000700, 0x0000), /* CLKRUN# */
+ _PAD_CFG_STRUCT(GPP_A9, 0x44000700, 0x1000), /* CLKOUT_LPC0 */
+ _PAD_CFG_STRUCT(GPP_A10, 0x44000700, 0x1000), /* CLKOUT_LPC1 */
+ _PAD_CFG_STRUCT(GPP_A11, 0x40880201, 0x0000), /* PME# */
+ _PAD_CFG_STRUCT(GPP_A12, 0x84000201, 0x0000), /* BM_BUSY# */
+ _PAD_CFG_STRUCT(GPP_A13, 0x84000201, 0x0000), /* SUSWARN#/SUSPWRDNACK*/
+ _PAD_CFG_STRUCT(GPP_A14, 0x44000700, 0x0000), /* SUS_STAT# */
+ _PAD_CFG_STRUCT(GPP_A15, 0x84000201, 0x0000), /* SUSACK# */
+ _PAD_CFG_STRUCT(GPP_A16, 0x84000200, 0x3000), /* SD_1P8_SEL */
+ _PAD_CFG_STRUCT(GPP_A17, 0x84000201, 0x0000), /* SD_VDD1_PWR_EN# */
+ _PAD_CFG_STRUCT(GPP_A18, 0x44000300, 0x3000), /* ISH_GP0 */
+ _PAD_CFG_STRUCT(GPP_A19, 0x44000300, 0x3000), /* ISH_GP1 */
+ _PAD_CFG_STRUCT(GPP_A20, 0x44000300, 0x3000), /* ISH_GP2 */
+ _PAD_CFG_STRUCT(GPP_A21, 0x44000300, 0x3000), /* ISH_GP3 */
+ _PAD_CFG_STRUCT(GPP_A22, 0x44000300, 0x3000), /* ISH_GP4 */
+ _PAD_CFG_STRUCT(GPP_A23, 0x44000300, 0x3000), /* ISH_GP5 */
+
+ /* ------- GPIO Group GPP_B ------- */
+
+ _PAD_CFG_STRUCT(GPP_B0, 0x84000700, 0x0000), /* Reserved */
+ _PAD_CFG_STRUCT(GPP_B1, 0x84000700, 0x0000), /* Reserved */
+ _PAD_CFG_STRUCT(GPP_B2, 0x84000201, 0x0000), /* VRALERT# */
+ _PAD_CFG_STRUCT(GPP_B3, 0x84000201, 0x0000), /* CPU_GP2 */
+ _PAD_CFG_STRUCT(GPP_B4, 0x84000201, 0x0000), /* CPU_GP3 */
+ _PAD_CFG_STRUCT(GPP_B5, 0x44000300, 0x0000), /* SRCCLKREQ0# */
+ _PAD_CFG_STRUCT(GPP_B6, 0x44000300, 0x0000), /* SRCCLKREQ1# */
+ _PAD_CFG_STRUCT(GPP_B7, 0x44000300, 0x0000), /* SRCCLKREQ2# */
+ _PAD_CFG_STRUCT(GPP_B8, 0x44000300, 0x0000), /* SRCCLKREQ3# */
+ _PAD_CFG_STRUCT(GPP_B9, 0x44000300, 0x0000), /* SRCCLKREQ4# */
+ _PAD_CFG_STRUCT(GPP_B10, 0x44000300, 0x0000), /* SRCCLKREQ5# */
+ _PAD_CFG_STRUCT(GPP_B11, 0x84000201, 0x0000), /* EXT_PWR_GATE# */
+ _PAD_CFG_STRUCT(GPP_B12, 0x44000700, 0x0000), /* SLP_S0# */
+ _PAD_CFG_STRUCT(GPP_B13, 0x44000700, 0x0000), /* PLTRST# */
+ _PAD_CFG_STRUCT(GPP_B14, 0x84000201, 0x0000), /* SPKR */
+ _PAD_CFG_STRUCT(GPP_B15, 0x80000701, 0x0000), /* GSPI0_CS0# */
+ _PAD_CFG_STRUCT(GPP_B16, 0x84000601, 0x0000), /* GSPI0_CLK */
+ _PAD_CFG_STRUCT(GPP_B17, 0x44000502, 0x0000), /* GSPI0_MISO */
+ _PAD_CFG_STRUCT(GPP_B18, 0x84000601, 0x0000), /* GSPI0_MOSI */
+ _PAD_CFG_STRUCT(GPP_B19, 0x84000400, 0x0000), /* GSPI1_CS0# */
+ _PAD_CFG_STRUCT(GPP_B20, 0x84000400, 0x0000), /* GSPI1_CLK */
+ _PAD_CFG_STRUCT(GPP_B21, 0x84000402, 0x0000), /* GSPI1_MISO */
+ _PAD_CFG_STRUCT(GPP_B22, 0x84000400, 0x0000), /* GSPI1_MOSI */
+ _PAD_CFG_STRUCT(GPP_B23, 0x44000201, 0x0000), /* SML1ALERT# */
+
+ /* ------- GPIO Group GPP_G ------- */
+
+ _PAD_CFG_STRUCT(GPP_G0, 0x84000200, 0x0000), /* SD_CMD */
+ _PAD_CFG_STRUCT(GPP_G1, 0x84000300, 0x0000), /* SD_DATA0 */
+ _PAD_CFG_STRUCT(GPP_G2, 0x84000300, 0x0000), /* SD_DATA1 */
+ _PAD_CFG_STRUCT(GPP_G3, 0x84000300, 0x0000), /* SD_DATA2 */
+ _PAD_CFG_STRUCT(GPP_G4, 0x84000300, 0x0000), /* SD_DATA3 */
+ _PAD_CFG_STRUCT(GPP_G5, 0x84000300, 0x3000), /* SD3_CD# */
+ _PAD_CFG_STRUCT(GPP_G6, 0x84000300, 0x0000), /* SD3_CLK */
+ _PAD_CFG_STRUCT(GPP_G7, 0x84000300, 0x1000), /* SD3_WP */
+
+ /* ------- GPIO Group GPP_D ------- */
+
+ _PAD_CFG_STRUCT(GPP_D0, 0x44000300, 0x0000), /* SPI1_CS# */
+ _PAD_CFG_STRUCT(GPP_D1, 0x44000300, 0x0000), /* SPI1_CLK */
+ _PAD_CFG_STRUCT(GPP_D2, 0x44000300, 0x0000), /* SPI1_MISO */
+ _PAD_CFG_STRUCT(GPP_D3, 0x44000300, 0x0000), /* SPI1_MOSI */
+ _PAD_CFG_STRUCT(GPP_D4, 0x44000300, 0x0000), /* IMGCLKOUT0 */
+ _PAD_CFG_STRUCT(GPP_D5, 0x44000700, 0x0000), /* ISH_I2C0_SDA */
+ _PAD_CFG_STRUCT(GPP_D6, 0x44000700, 0x0000), /* ISH_I2C0_SCL */
+ _PAD_CFG_STRUCT(GPP_D7, 0x84000201, 0x0000), /* ISH_I2C1_SDA */
+ _PAD_CFG_STRUCT(GPP_D8, 0x84000200, 0x0000), /* ISH_I2C1_SCL */
+ _PAD_CFG_STRUCT(GPP_D9, 0x84000201, 0x0000), /* ISH_SPI_CS# */
+ _PAD_CFG_STRUCT(GPP_D10, 0x84000201, 0x0000), /* ISH_SPI_CLK */
+ _PAD_CFG_STRUCT(GPP_D11, 0x44000201, 0x3000), /* ISH_SPI_MISO */
+ _PAD_CFG_STRUCT(GPP_D12, 0x42100102, 0x3000), /* ISH_SPI_MOSI */
+ _PAD_CFG_STRUCT(GPP_D13, 0x44000201, 0x0000), /* ISH_UART0_RXD */
+ _PAD_CFG_STRUCT(GPP_D14, 0x84000201, 0x0000), /* ISH_UART0_TXD */
+ _PAD_CFG_STRUCT(GPP_D15, 0x84000201, 0x0000), /* ISH_UART0_RTS# */
+ _PAD_CFG_STRUCT(GPP_D16, 0x44000200, 0x0000), /* ISH_UART0_CTS# */
+ _PAD_CFG_STRUCT(GPP_D17, 0x44000700, 0x0000), /* DMIC_CLK1 */
+ _PAD_CFG_STRUCT(GPP_D18, 0x44000700, 0x0000), /* DMIC_DATA1 */
+ _PAD_CFG_STRUCT(GPP_D19, 0x44000700, 0x0000), /* DMIC_CLK0 */
+ _PAD_CFG_STRUCT(GPP_D20, 0x44000700, 0x0000), /* DMIC_DATA0 */
+ _PAD_CFG_STRUCT(GPP_D21, 0x44000300, 0x0000), /* SPI1_IO2 */
+ _PAD_CFG_STRUCT(GPP_D22, 0x44000300, 0x0000), /* SPI1_IO3 */
+ _PAD_CFG_STRUCT(GPP_D23, 0x44000300, 0x0000), /* I2S_MCLK */
+
+ /* ------- GPIO Group GPP_F ------- */
+
+ _PAD_CFG_STRUCT(GPP_F0, 0x84000301, 0x0000), /* CNV_PA_BLANKING */
+ _PAD_CFG_STRUCT(GPP_F1, 0x84000200, 0x0000), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_F2, 0x84000201, 0x3000), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_F3, 0x84000200, 0x3000), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_F4, 0x44000700, 0x3000), /* CNV_BRI_DT */
+ _PAD_CFG_STRUCT(GPP_F5, 0x44000702, 0x3000), /* CNV_BRI_RSP */
+ _PAD_CFG_STRUCT(GPP_F6, 0x44000700, 0x3000), /* CNV_RGI_DT */
+ _PAD_CFG_STRUCT(GPP_F7, 0x44000702, 0x3000), /* CNV_RGI_RSP */
+ _PAD_CFG_STRUCT(GPP_F8, 0x44000300, 0x0000), /* CNV_MFUART2_RXD */
+ _PAD_CFG_STRUCT(GPP_F9, 0x44000300, 0x0000), /* CNV_MFUART2_TXD */
+ _PAD_CFG_STRUCT(GPP_F10, 0x84000201, 0x0000), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_F11, 0x44000300, 0x0000), /* EMMC_CMD */
+ _PAD_CFG_STRUCT(GPP_F12, 0x44000300, 0x0000), /* EMMC_DATA0 */
+ _PAD_CFG_STRUCT(GPP_F13, 0x44000300, 0x0000), /* EMMC_DATA1 */
+ _PAD_CFG_STRUCT(GPP_F14, 0x44000300, 0x0000), /* EMMC_DATA2 */
+ _PAD_CFG_STRUCT(GPP_F15, 0x44000300, 0x0000), /* EMMC_DATA3 */
+ _PAD_CFG_STRUCT(GPP_F16, 0x44000300, 0x0000), /* EMMC_DATA4 */
+ _PAD_CFG_STRUCT(GPP_F17, 0x44000300, 0x0000), /* EMMC_DATA5 */
+ _PAD_CFG_STRUCT(GPP_F18, 0x44000300, 0x0000), /* EMMC_DATA6 */
+ _PAD_CFG_STRUCT(GPP_F19, 0x44000300, 0x0000), /* EMMC_DATA7 */
+ _PAD_CFG_STRUCT(GPP_F20, 0x44000300, 0x0000), /* EMMC_RCLK */
+ _PAD_CFG_STRUCT(GPP_F21, 0x44000300, 0x0000), /* EMMC_CLK */
+ _PAD_CFG_STRUCT(GPP_F22, 0x44000300, 0x0000), /* EMMC_RESET# */
+ _PAD_CFG_STRUCT(GPP_F23, 0x44000700, 0x1000), /* A4WP_PRESENT */
+
+ /* ------- GPIO Group GPP_H ------- */
+
+ _PAD_CFG_STRUCT(GPP_H0, 0x44000300, 0x3000), /* I2S2_SCLK */
+ _PAD_CFG_STRUCT(GPP_H1, 0x44000f00, 0x3000), /* CNV_RF_RESET# */
+ _PAD_CFG_STRUCT(GPP_H2, 0x84000f00, 0x3000), /* MODEM_CLKREQ */
+ _PAD_CFG_STRUCT(GPP_H3, 0x84000300, 0x3000), /* I2S2_RXD */
+ _PAD_CFG_STRUCT(GPP_H4, 0x84000300, 0x0000), /* I2C2_SDA */
+ _PAD_CFG_STRUCT(GPP_H5, 0x84000300, 0x0000), /* I2C2_SCL */
+ _PAD_CFG_STRUCT(GPP_H6, 0x84000702, 0x0000), /* I2C3_SDA */
+ _PAD_CFG_STRUCT(GPP_H7, 0x84000702, 0x0000), /* I2C3_SCL */
+ _PAD_CFG_STRUCT(GPP_H8, 0x84000702, 0x0000), /* I2C4_SDA */
+ _PAD_CFG_STRUCT(GPP_H9, 0x84000702, 0x0000), /* I2C4_SCL */
+ _PAD_CFG_STRUCT(GPP_H10, 0x84000603, 0x0000), /* I2C5_SDA */
+ _PAD_CFG_STRUCT(GPP_H11, 0x84000603, 0x0000), /* I2C5_SCL */
+ _PAD_CFG_STRUCT(GPP_H12, 0x84000201, 0x0000), /* M2_SKT2_CFG0 */
+ _PAD_CFG_STRUCT(GPP_H13, 0x84000201, 0x0000), /* M2_SKT2_CFG1 */
+ _PAD_CFG_STRUCT(GPP_H14, 0x84000200, 0x0000), /* M2_SKT2_CFG2 */
+ _PAD_CFG_STRUCT(GPP_H15, 0x84000201, 0x0000), /* M2_SKT2_CFG3 */
+ _PAD_CFG_STRUCT(GPP_H16, 0x84000201, 0x0000), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_H17, 0x84000201, 0x0000), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_H18, 0x84000700, 0x0000), /* CPU_C10_GATE# */
+ _PAD_CFG_STRUCT(GPP_H19, 0x84000201, 0x0000), /* TIME_SYNC0 */
+ _PAD_CFG_STRUCT(GPP_H20, 0x84000300, 0x0000), /* IMGCLKOUT1 */
+ _PAD_CFG_STRUCT(GPP_H21, 0x84000200, 0x0000), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_H22, 0x84000201, 0x0000), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_H23, 0x84000200, 0x0000), /* GPIO */
+
+ /* ------- GPIO Group GPD ------- */
+
+ _PAD_CFG_STRUCT(GPD0, 0x44000702, 0x0000), /* BATLOW# */
+ _PAD_CFG_STRUCT(GPD1, 0x44000702, 0x3c00), /* ACPRESENT */
+ _PAD_CFG_STRUCT(GPD2, 0x44000702, 0x3c00), /* LAN_WAKE# */
+ _PAD_CFG_STRUCT(GPD3, 0x44000702, 0x3000), /* PRWBTN# */
+ _PAD_CFG_STRUCT(GPD4, 0x44000600, 0x0000), /* SLP_S3# */
+ _PAD_CFG_STRUCT(GPD5, 0x44000600, 0x0000), /* SLP_S4# */
+ _PAD_CFG_STRUCT(GPD6, 0x44000600, 0x0000), /* SLP_A# */
+ _PAD_CFG_STRUCT(GPD7, 0x44000200, 0x0000), /* GPIO */
+ _PAD_CFG_STRUCT(GPD8, 0x44000700, 0x0000), /* SUSCLK */
+ _PAD_CFG_STRUCT(GPD9, 0x44000700, 0x0000), /* SLP_WLAN# */
+ _PAD_CFG_STRUCT(GPD10, 0x44000600, 0x0000), /* SLP_S5# */
+ _PAD_CFG_STRUCT(GPD11, 0x44000600, 0x0000), /* LANPHYPC */
+
+ /* ------- GPIO Group GPP_C ------- */
+
+ _PAD_CFG_STRUCT(GPP_C0, 0x44000702, 0x0000), /* SMBCLK */
+ _PAD_CFG_STRUCT(GPP_C1, 0x44000702, 0x0000), /* SMBDATA */
+ _PAD_CFG_STRUCT(GPP_C2, 0x44000201, 0x0000), /* SMBALERT# */
+ _PAD_CFG_STRUCT(GPP_C3, 0x44000702, 0x0000), /* SML0CLK */
+ _PAD_CFG_STRUCT(GPP_C4, 0x44000702, 0x0000), /* SML0DATA */
+ _PAD_CFG_STRUCT(GPP_C5, 0x84000201, 0x0000), /* SML0ALERT# */
+ _PAD_CFG_STRUCT(GPP_C6, 0x44000300, 0x0000), /* SML1CLK */
+ _PAD_CFG_STRUCT(GPP_C7, 0x44000300, 0x0000), /* SML1DATA */
+ _PAD_CFG_STRUCT(GPP_C8, 0x84000201, 0x0000), /* UART0_RXD */
+ _PAD_CFG_STRUCT(GPP_C9, 0x84000201, 0x0000), /* UART0_TXD */
+ _PAD_CFG_STRUCT(GPP_C10, 0x84000200, 0x0000), /* UART0_RTS# */
+ _PAD_CFG_STRUCT(GPP_C11, 0x84000201, 0x0000), /* UART0_CTS# */
+ _PAD_CFG_STRUCT(GPP_C12, 0x84000603, 0x0000), /* UART1_RXD */
+ _PAD_CFG_STRUCT(GPP_C13, 0x84000700, 0x0000), /* UART1_TXD */
+ _PAD_CFG_STRUCT(GPP_C14, 0x84000700, 0x0000), /* UART1_RTS# */
+ _PAD_CFG_STRUCT(GPP_C15, 0x84000702, 0x0000), /* UART1_CTS# */
+ _PAD_CFG_STRUCT(GPP_C16, 0x84000402, 0x0000), /* I2C0_SDA */
+ _PAD_CFG_STRUCT(GPP_C17, 0x84000402, 0x0000), /* I2C0_SCL */
+ _PAD_CFG_STRUCT(GPP_C18, 0x44000702, 0x0000), /* I2C1_SDA */
+ _PAD_CFG_STRUCT(GPP_C19, 0x44000702, 0x0000), /* I2C1_SCL */
+ _PAD_CFG_STRUCT(GPP_C20, 0x44000300, 0x0000), /* UART2_RXD */
+ _PAD_CFG_STRUCT(GPP_C21, 0x44000300, 0x0000), /* UART2_TXD */
+ _PAD_CFG_STRUCT(GPP_C22, 0x84000201, 0x0000), /* UART2_RTS# */
+ _PAD_CFG_STRUCT(GPP_C23, 0x40100102, 0x1000), /* UART2_CTS# */
+
+ /* ------- GPIO Group GPP_E ------- */
+
+ _PAD_CFG_STRUCT(GPP_E0, 0x84000300, 0x0000), /* SATAXPCIE0 */
+ _PAD_CFG_STRUCT(GPP_E1, 0x84000300, 0x0000), /* SATAXPCIE1 */
+ _PAD_CFG_STRUCT(GPP_E2, 0x84000502, 0x3000), /* SATAXPCIE2 */
+ _PAD_CFG_STRUCT(GPP_E3, 0x82040102, 0x0000), /* CPU_GP0 */
+ _PAD_CFG_STRUCT(GPP_E4, 0x84000201, 0x0000), /* SATA_DEVSLP0 */
+ _PAD_CFG_STRUCT(GPP_E5, 0x84000300, 0x0000), /* SATA_DEVSLP1 */
+ _PAD_CFG_STRUCT(GPP_E6, 0x84000300, 0x0000), /* SATA_DEVSLP2 */
+ _PAD_CFG_STRUCT(GPP_E7, 0x82000102, 0x0000), /* CPU_GP1 */
+ _PAD_CFG_STRUCT(GPP_E8, 0x84000700, 0x0000), /* SATALED# */
+ _PAD_CFG_STRUCT(GPP_E9, 0x44001700, 0x0000), /* USB2_OC0# */
+ _PAD_CFG_STRUCT(GPP_E10, 0x44001700, 0x0000), /* USB2_OC1# */
+ _PAD_CFG_STRUCT(GPP_E11, 0x44000702, 0x0000), /* USB2_OC2# */
+ _PAD_CFG_STRUCT(GPP_E12, 0x44000702, 0x0000), /* USB2_OC3# */
+ _PAD_CFG_STRUCT(GPP_E13, 0x84000700, 0x0000), /* DDPB_HPD0 */
+ _PAD_CFG_STRUCT(GPP_E14, 0x84000702, 0x0000), /* DDPC_HPD1 */
+ _PAD_CFG_STRUCT(GPP_E15, 0x84000201, 0x0000), /* DDPD_HPD2 */
+ _PAD_CFG_STRUCT(GPP_E16, 0x80880102, 0x3000), /* GPIO */
+ _PAD_CFG_STRUCT(GPP_E17, 0x84000700, 0x0000), /* EDP_HPD */
+ _PAD_CFG_STRUCT(GPP_E18, 0x84000702, 0x0000), /* DPPB_CTRLCLK */
+ _PAD_CFG_STRUCT(GPP_E19, 0x84000602, 0x0000), /* DPPB_CTRLDATA */
+ _PAD_CFG_STRUCT(GPP_E20, 0x84000700, 0x0000), /* DPPC_CTRLCLK */
+ _PAD_CFG_STRUCT(GPP_E21, 0x84000602, 0x0000), /* DPPC_CTRLDATA */
+ _PAD_CFG_STRUCT(GPP_E22, 0x84000702, 0x0000), /* DPPD_CTRLCLK */
+ _PAD_CFG_STRUCT(GPP_E23, 0x84000602, 0x0000), /* DPPD_CTRLDATA */
+
+};
+
+const struct pad_config *variant_gpio_table(size_t *num)
+{
+ *num = ARRAY_SIZE(gpio_table);
+ return gpio_table;
+}
diff --git a/src/mainboard/purism/librem_whl/variants/librem_mini/hda_verb.c b/src/mainboard/purism/librem_whl/variants/librem_mini/hda_verb.c
new file mode 100644
index 0000000000..c3daf3c5ed
--- /dev/null
+++ b/src/mainboard/purism/librem_whl/variants/librem_mini/hda_verb.c
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <device/azalia_device.h>
+
+const u32 cim_verb_data[] = {
+ 0x10ec0269, /* Codec Vendor/Device ID: Realtek ALC293 */
+ 0x10ec0000, /* Subsystem ID */
+ 11, /* Number of entries */
+
+ AZALIA_SUBVENDOR(0, 0x10ec0000),
+ AZALIA_PIN_CFG(0, 0x12, 0x40000000),
+ AZALIA_PIN_CFG(0, 0x15, 0x01214010),
+ AZALIA_PIN_CFG(0, 0x17, 0x411111f0),
+ AZALIA_PIN_CFG(0, 0x18, 0x01a19130),
+ AZALIA_PIN_CFG(0, 0x19, 0x411111f0),
+ AZALIA_PIN_CFG(0, 0x1a, 0x411111f0),
+ AZALIA_PIN_CFG(0, 0x1b, 0x411111f0),
+ AZALIA_PIN_CFG(0, 0x1d, 0x40422201),
+ AZALIA_PIN_CFG(0, 0x1e, 0x411111f0),
+
+ 0x8086280b, /* Codec Vendor/Device ID: Intel CannonPoint HDMI */
+ 0x80860101, /* Subsystem ID */
+ 4, /* Number of entries */
+
+ AZALIA_SUBVENDOR(2, 0x80860101),
+ AZALIA_PIN_CFG(2, 0x05, 0x18560010),
+ AZALIA_PIN_CFG(2, 0x06, 0x18560020),
+ AZALIA_PIN_CFG(2, 0x07, 0x18560030),
+};
+
+const u32 pc_beep_verbs[] = {};
+
+AZALIA_ARRAY_SIZES;
diff --git a/src/mainboard/purism/librem_whl/variants/librem_mini/include/variant/gpio.h b/src/mainboard/purism/librem_whl/variants/librem_mini/include/variant/gpio.h
new file mode 100644
index 0000000000..9094b0419d
--- /dev/null
+++ b/src/mainboard/purism/librem_whl/variants/librem_mini/include/variant/gpio.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef VARIANT_GPIO_H
+#define VARIANT_GPIO_H
+
+#include <soc/gpe.h>
+#include <soc/gpio.h>
+
+const struct pad_config *variant_gpio_table(size_t *num);
+
+#endif