summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/soc/intel/cannonlake/chip.h32
1 files changed, 0 insertions, 32 deletions
diff --git a/src/soc/intel/cannonlake/chip.h b/src/soc/intel/cannonlake/chip.h
index 70aab92853..492ebca9c2 100644
--- a/src/soc/intel/cannonlake/chip.h
+++ b/src/soc/intel/cannonlake/chip.h
@@ -78,24 +78,6 @@ struct soc_intel_cannonlake_config {
/* TCC activation offset */
uint32_t tcc_offset;
- uint64_t PlatformMemorySize;
- uint8_t SmramMask;
- uint8_t MrcFastBoot;
- uint32_t TsegSize;
- uint16_t MmioSize;
-
- /* DDR Frequency Limit. Maximum Memory Frequency Selections in Mhz.
- * Options : 1067, 1333, 1600, 1867, 2133, 2400, 2667, 2933, 0(Auto) */
- uint16_t DdrFreqLimit;
-
- /* SAGV Low Frequency Selections in Mhz.
- * Options : 1067, 1333, 1600, 1867, 2133, 2400, 2667, 2933, 0(Auto) */
- uint16_t FreqSaGvLow;
-
- /* SAGV Mid Frequency Selections in Mhz.
- * Options : 1067, 1333, 1600, 1867, 2133, 2400, 2667, 2933, 0(Auto) */
- uint16_t FreqSaGvMid;
-
/* System Agent dynamic frequency support. Only effects ULX/ULT CPUs.
* For CNL, options are as following
* When enabled, memory will be training at three different frequencies.
@@ -119,7 +101,6 @@ struct soc_intel_cannonlake_config {
/* USB related */
struct usb2_port_config usb2_ports[16];
struct usb3_port_config usb3_ports[10];
- uint8_t SsicPortEnable;
/* Wake Enable Bitmap for USB2 ports */
uint16_t usb2_wake_enable_bitmap;
/* Wake Enable Bitmap for USB3 ports */
@@ -222,27 +203,14 @@ struct soc_intel_cannonlake_config {
/* Enable/disable SD card write protect pin configuration on CML */
uint8_t ScsSdCardWpPinEnabled;
- /* Integrated Sensor */
- uint8_t PchIshEnable;
-
/* Heci related */
uint8_t DisableHeciRetry;
/* Gfx related */
- uint8_t IgdDvmt50PreAlloc;
uint8_t SkipExtGfxScan;
- uint32_t GraphicsConfigPtr;
uint8_t Device4Enable;
- /* GPIO IRQ Select. The valid value is 14 or 15 */
- uint8_t GpioIrqRoute;
- /* SCI IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23 */
- uint8_t SciIrqSelect;
- /* TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23 */
- uint8_t TcoIrqSelect;
- uint8_t TcoIrqEnable;
-
/* CPU PL2/4 Config
* Performance: Maximum PLs for maximum performance.
* Baseline: Baseline PLs for balanced performance at lower power.