summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--util/flashrom/Makefile2
-rw-r--r--util/flashrom/chipset_enable.c56
-rw-r--r--util/flashrom/flash.h2
-rw-r--r--util/flashrom/flashrom.c15
4 files changed, 64 insertions, 11 deletions
diff --git a/util/flashrom/Makefile b/util/flashrom/Makefile
index c79d402b6a..95adb881a8 100644
--- a/util/flashrom/Makefile
+++ b/util/flashrom/Makefile
@@ -11,7 +11,7 @@ STRIP = strip
INSTALL = /usr/bin/install
PREFIX = /usr/local
#CFLAGS = -O2 -g -Wall -Werror
-CFLAGS = -Os -Wall -Werror # -DTS5300
+CFLAGS = -Os -Wall -Werror
OS_ARCH = $(shell uname)
ifeq ($(OS_ARCH), SunOS)
LDFLAGS = -lpci -lz
diff --git a/util/flashrom/chipset_enable.c b/util/flashrom/chipset_enable.c
index 22eceb296e..e8297d6db7 100644
--- a/util/flashrom/chipset_enable.c
+++ b/util/flashrom/chipset_enable.c
@@ -35,6 +35,8 @@
#include <unistd.h>
#include "flash.h"
+unsigned long flashbase = 0;
+
/**
* flashrom defaults to LPC flash devices. If a known SPI controller is found
* and the SPI strappings are set, this will be overwritten by the probing code.
@@ -797,6 +799,59 @@ static int enable_flash_ht1000(struct pci_dev *dev, const char *name)
return 0;
}
+/**
+ * Usually on the x86 architectures (and on other PC-like platforms like some
+ * Alphas or Itanium) the system flash is mapped right below 4G. On the AMD
+ * Elan SC520 only a small piece of the system flash is mapped there, but the
+ * complete flash is mapped somewhere below 1G. The position can be determined
+ * by the BOOTCS PAR register.
+ */
+static int get_flashbase_sc520(struct pci_dev *dev, const char *name)
+{
+ int i, bootcs_found = 0;
+ uint32_t parx = 0;
+ void *mmcr;
+
+ /* 1. Map MMCR */
+ mmcr = mmap(0, getpagesize(), PROT_WRITE | PROT_READ,
+ MAP_SHARED, fd_mem, (off_t)0xFFFEF000);
+
+ if (mmcr == MAP_FAILED) {
+ perror("Can't mmap Elan SC520 specific registers using " MEM_DEV);
+ exit(1);
+ }
+
+ /* 2. Scan PAR0 (0x88) - PAR15 (0xc4) for
+ * BOOTCS region (PARx[31:29] = 100b)e
+ */
+ for (i = 0x88; i <= 0xc4; i += 4) {
+ parx = *(volatile uint32_t *)(mmcr + i);
+ if ((parx >> 29) == 4) {
+ bootcs_found = 1;
+ break; /* BOOTCS found */
+ }
+ }
+
+ /* 3. PARx[25] = 1b --> flashbase[29:16] = PARx[13:0]
+ * PARx[25] = 0b --> flashbase[29:12] = PARx[17:0]
+ */
+ if (bootcs_found) {
+ if (parx & (1 << 25)) {
+ parx &= (1 << 14) - 1; /* Mask [13:0] */
+ flashbase = parx << 16;
+ } else {
+ parx &= (1 << 18) - 1; /* Mask [17:0] */
+ flashbase = parx << 12;
+ }
+ } else {
+ printf("AMD Elan SC520 detected, but no BOOTCS. Assuming flash at 4G\n");
+ }
+
+ /* 4. Clean up */
+ munmap (mmcr, getpagesize());
+ return 0;
+}
+
typedef struct penable {
uint16_t vendor, device;
const char *name;
@@ -875,6 +930,7 @@ static const FLASH_ENABLE enables[] = {
{0x10de, 0x0548, "NVIDIA MCP67", enable_flash_mcp55},
{0x1002, 0x4377, "ATI SB400", enable_flash_sb400},
{0x1166, 0x0205, "Broadcom HT-1000", enable_flash_ht1000},
+ {0x1022, 0x3000, "AMD Elan SC520", get_flashbase_sc520},
};
void print_supported_chipsets(void)
diff --git a/util/flashrom/flash.h b/util/flashrom/flash.h
index 70a390f2f3..df122eba4b 100644
--- a/util/flashrom/flash.h
+++ b/util/flashrom/flash.h
@@ -410,6 +410,8 @@ void print_supported_boards(void);
int chipset_flash_enable(void);
void print_supported_chipsets(void);
+extern unsigned long flashbase;
+
typedef enum {
BUS_TYPE_LPC,
BUS_TYPE_ICH7_SPI,
diff --git a/util/flashrom/flashrom.c b/util/flashrom/flashrom.c
index 5e84134d31..b03106015d 100644
--- a/util/flashrom/flashrom.c
+++ b/util/flashrom/flashrom.c
@@ -105,7 +105,7 @@ struct flashchip *probe_flash(struct flashchip *first_flash, int force)
{
volatile uint8_t *bios;
struct flashchip *flash;
- unsigned long flash_baseaddr = 0, size;
+ unsigned long size;
for (flash = first_flash; flash && flash->name; flash++) {
if (chip_to_probe && strcmp(flash->name, chip_to_probe) != 0)
@@ -133,16 +133,11 @@ struct flashchip *probe_flash(struct flashchip *first_flash, int force)
*/
size = getpagesize();
}
-#ifdef TS5300
- // FIXME: Wrong place for this decision
- // FIXME: This should be autodetected. It is trivial.
- flash_baseaddr = 0x9400000;
-#else
- flash_baseaddr = (0xffffffff - size + 1);
-#endif
+ if (!flashbase)
+ flashbase = (0xffffffff - size + 1);
bios = mmap(0, size, PROT_WRITE | PROT_READ, MAP_SHARED,
- fd_mem, (off_t) flash_baseaddr);
+ fd_mem, (off_t) flashbase);
if (bios == MAP_FAILED) {
perror("Can't mmap memory using " MEM_DEV);
exit(1);
@@ -167,7 +162,7 @@ notfound:
return NULL;
printf("Found chip \"%s %s\" (%d KB) at physical address 0x%lx.\n",
- flash->vendor, flash->name, flash->total_size, flash_baseaddr);
+ flash->vendor, flash->name, flash->total_size, flashbase);
return flash;
}