summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/northbridge/intel/i440bx/raminit.c64
1 files changed, 39 insertions, 25 deletions
diff --git a/src/northbridge/intel/i440bx/raminit.c b/src/northbridge/intel/i440bx/raminit.c
index 9fc124b7ff..232b87249c 100644
--- a/src/northbridge/intel/i440bx/raminit.c
+++ b/src/northbridge/intel/i440bx/raminit.c
@@ -258,7 +258,7 @@ static const u8 register_values[] = {
* 01 4 KB
* 10 8 KB
* 11 Reserved
- *
+ *
* RPS bits Corresponding DRB register
* [01:00] DRB[0], row 0
* [03:02] DRB[1], row 1
@@ -721,19 +721,23 @@ static struct dimm_size spd_get_dimm_size(unsigned int device)
*/
static void set_dram_row_attributes(void)
{
- int i, dra, drb, col, width, value, rps, edosd, ecc, nbxecc;
+ int i, dra, drb, col, width, value, rps;
u8 bpr; /* Top 8 bits of PGPOL */
+ u8 nbxecc = 0; /* NBXCFG[31:24] */
+ u8 edo, sd, regsd; /* EDO, SDRAM, registered SDRAM */
- edosd = 0;
+ edo = 0;
+ sd = 0;
+ regsd = 1;
rps = 0;
drb = 0;
bpr = 0;
- nbxecc = 0xff;
for (i = 0; i < DIMM_SOCKETS; i++) {
unsigned int device;
device = DIMM0 + i;
bpr >>= 2;
+ nbxecc >>= 2;
/* First check if a DIMM is actually present. */
value = spd_read_byte(device, SPD_MEMORY_TYPE);
@@ -742,13 +746,13 @@ static void set_dram_row_attributes(void)
|| value == SPD_MEMORY_TYPE_SDRAM) {
if (value == SPD_MEMORY_TYPE_EDO) {
- edosd |= 0x02;
+ edo = 1;
} else if (value == SPD_MEMORY_TYPE_SDRAM) {
- edosd |= 0x04;
+ sd = 1;
}
PRINT_DEBUG("Found DIMM in slot %d\n", i);
- if (edosd == 0x06) {
+ if (edo && sd) {
print_err("Mixing EDO/SDRAM unsupported!\n");
die("HALT\n");
}
@@ -764,23 +768,37 @@ static void set_dram_row_attributes(void)
* TODO: Other register than NBXCFG also needs this
* ECC information.
*/
- ecc = spd_read_byte(device, SPD_DIMM_CONFIG_TYPE);
+ value = spd_read_byte(device, SPD_DIMM_CONFIG_TYPE);
/* Data width */
width = spd_read_byte(device, SPD_MODULE_DATA_WIDTH_LSB);
/* Exclude error checking data width from page size calculations */
- if (ecc) {
+ if (value) {
value = spd_read_byte(device,
SPD_ERROR_CHECKING_SDRAM_WIDTH);
width -= value;
/* ### ECC */
/* Clear top 2 bits to help set up NBXCFG. */
- ecc &= 0x3f;
+ nbxecc &= 0x3f;
} else {
/* Without ECC, top 2 bits should be 11. */
- ecc |= 0xc0;
+ nbxecc |= 0xc0;
+ }
+
+ /* If any installed DIMM is *not* registered, this system cannot be
+ * configured for registered SDRAM.
+ * By registered, only the address and control lines need to be, which
+ * we can tell by reading SPD byte 21, bit 1.
+ */
+ value = spd_read_byte(device, SPD_MODULE_ATTRIBUTES);
+
+ PRINT_DEBUG("DIMM is ");
+ if ((value & MODULE_REGISTERED) == 0) {
+ regsd = 0;
+ PRINT_DEBUG("not ");
}
+ PRINT_DEBUG("registered\n");
/* Calculate page size in bits. */
value = ((1 << col) * width);
@@ -801,7 +819,6 @@ static void set_dram_row_attributes(void)
* Second bank of 1-bank DIMMs "doesn't have
* ECC" - or anything.
*/
- ecc |= 0x80;
if (dra == 2) {
dra = 0x0; /* 2KB */
} else if (dra == 4) {
@@ -878,7 +895,6 @@ static void set_dram_row_attributes(void)
/* If there's no DIMM in the slot, set dra to 0x00. */
dra = 0x00;
- ecc = 0xc0;
/* Still have to propagate DRB over. */
drb &= 0xff;
drb |= (drb << 8);
@@ -895,7 +911,6 @@ static void set_dram_row_attributes(void)
drb >>= 8;
rps |= (dra & 0x0f) << (i * 4);
- nbxecc = (nbxecc >> 2) | (ecc & 0xc0);
}
/* Set paging policy register. */
@@ -910,20 +925,19 @@ static void set_dram_row_attributes(void)
pci_write_config8(NB, NBXCFG + 3, nbxecc);
PRINT_DEBUG("NBXECC[31:24] has been set to 0x%02x\n", nbxecc);
- /* Set DRAMC[4:3] to proper memory type (EDO/SDRAM).
- * TODO: Registered SDRAM support.
- */
- edosd &= 0x07;
- if (edosd & 0x02) {
- edosd |= 0x00;
- } else if (edosd & 0x04) {
- edosd |= 0x08;
+ /* Set DRAMC[4:3] to proper memory type (EDO/SDRAM/Registered SDRAM). */
+
+ /* i will be used to set DRAMC[4:3]. */
+ if (regsd && sd) {
+ i = 0x10; // Registered SDRAM
+ } else if (sd) {
+ i = 0x08; // SDRAM
+ } else {
+ i = 0; // EDO
}
- edosd &= 0x18;
- /* edosd is now in the form needed for DRAMC[4:3]. */
value = pci_read_config8(NB, DRAMC) & 0xe7;
- value |= edosd;
+ value |= i;
pci_write_config8(NB, DRAMC, value);
PRINT_DEBUG("DRAMC has been set to 0x%02x\n", value);
}