diff options
| -rw-r--r-- | src/soc/intel/baytrail/baytrail/gpio.h | 34 | ||||
| -rw-r--r-- | src/soc/intel/baytrail/baytrail/irq.h | 41 | ||||
| -rw-r--r-- | src/soc/intel/baytrail/gpio.c | 25 |
3 files changed, 97 insertions, 3 deletions
diff --git a/src/soc/intel/baytrail/baytrail/gpio.h b/src/soc/intel/baytrail/baytrail/gpio.h index 8c90c89d26..154ac84390 100644 --- a/src/soc/intel/baytrail/baytrail/gpio.h +++ b/src/soc/intel/baytrail/baytrail/gpio.h @@ -31,6 +31,9 @@ #define GPNCORE_PAD_BASE (IO_BASE_ADDRESS + 0x1000) #define GPSSUS_PAD_BASE (IO_BASE_ADDRESS + 0x2000) +/* DIRQ registers start at pad base + 0x980 */ +#define PAD_BASE_DIRQ_OFFSET 0x980 + /* Pad register offset */ #define PAD_CONF0_REG 0x0 #define PAD_CONF1_REG 0x4 @@ -77,6 +80,12 @@ /* config0[27] - Direct Irq En */ #define PAD_IRQ_EN (1 << 27) +/* config0[26] - gd_tne */ +#define PAD_TNE_IRQ (1 << 26) + +/* config0[25] - gd_tpe */ +#define PAD_TPE_IRQ (1 << 25) + /* config0[24] - Gd Level */ #define PAD_LEVEL_IRQ (1 << 24) #define PAD_EDGE_IRQ (0 << 24) @@ -169,6 +178,26 @@ .use_sel = GPIO_USE_LEGACY, \ .io_sel = GPIO_DIR_INPUT } +/* Direct / dedicated IRQ input - falling-edge triggered */ +#define GPIO_DIRQ \ + { .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \ + | PAD_FUNC0 | PAD_IRQ_EN | PAD_TNE_IRQ, \ + .pad_conf1 = PAD_CONFIG1_DEFAULT, \ + .pad_val = PAD_VAL_INPUT_ENABLE, \ + .use_sel = GPIO_USE_LEGACY, \ + .io_sel = GPIO_DIR_INPUT, \ + .tne = GPIO_NEDGE_ENABLE } + +/* Direct / dedicated IRQ input - rising-edge triggered */ +#define GPIO_DIRQ_INVERT \ + { .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \ + | PAD_FUNC0 | PAD_IRQ_EN | PAD_TPE_IRQ, \ + .pad_conf1 = PAD_CONFIG1_DEFAULT, \ + .pad_val = PAD_VAL_INPUT_ENABLE, \ + .use_sel = GPIO_USE_LEGACY, \ + .io_sel = GPIO_DIR_INPUT, \ + .tne = GPIO_PEDGE_ENABLE } + #define GPIO_OUT_LOW \ { .pad_conf0 = PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \ | PAD_FUNC0, \ @@ -236,6 +265,9 @@ #define GPIO_NC GPIO_INPUT_PU_10K #define GPIO_DEFAULT GPIO_FUNC0 +/* 16 DirectIRQs per supported bank */ +#define GPIO_MAX_DIRQS 16 + struct soc_gpio_map { u32 pad_conf0; u32 pad_conf1; @@ -253,6 +285,8 @@ struct soc_gpio_config { const struct soc_gpio_map *ncore; const struct soc_gpio_map *score; const struct soc_gpio_map *ssus; + const u8 (*core_dirq)[GPIO_MAX_DIRQS]; + const u8 (*sus_dirq)[GPIO_MAX_DIRQS]; }; /* Description of GPIO 'bank' ex. {ncore, score. ssus} */ diff --git a/src/soc/intel/baytrail/baytrail/irq.h b/src/soc/intel/baytrail/baytrail/irq.h index 2359d21423..f1abae77d9 100644 --- a/src/soc/intel/baytrail/baytrail/irq.h +++ b/src/soc/intel/baytrail/baytrail/irq.h @@ -50,9 +50,44 @@ #define SCC_EMMC_IRQ 45 #define SCC_SDIO_IRQ 46 #define SCC_SD_IRQ 47 -/* The dedicated gpio irqs are active high. */ -#define GPIO_S0_DED_IRQ(slot) (51 + (slot)) -#define GPIO_S5_DED_IRQ(slot) (67 + (slot)) +/* GPIO direct / dedicated IRQs. */ +#define GPIO_S0_DED_IRQ_0 51 +#define GPIO_S0_DED_IRQ_1 52 +#define GPIO_S0_DED_IRQ_2 53 +#define GPIO_S0_DED_IRQ_3 54 +#define GPIO_S0_DED_IRQ_4 55 +#define GPIO_S0_DED_IRQ_5 56 +#define GPIO_S0_DED_IRQ_6 57 +#define GPIO_S0_DED_IRQ_7 58 +#define GPIO_S0_DED_IRQ_8 59 +#define GPIO_S0_DED_IRQ_9 60 +#define GPIO_S0_DED_IRQ_10 61 +#define GPIO_S0_DED_IRQ_11 62 +#define GPIO_S0_DED_IRQ_12 63 +#define GPIO_S0_DED_IRQ_13 64 +#define GPIO_S0_DED_IRQ_14 65 +#define GPIO_S0_DED_IRQ_15 66 +#define GPIO_S5_DED_IRQ_0 67 +#define GPIO_S5_DED_IRQ_1 68 +#define GPIO_S5_DED_IRQ_2 69 +#define GPIO_S5_DED_IRQ_3 70 +#define GPIO_S5_DED_IRQ_4 71 +#define GPIO_S5_DED_IRQ_5 72 +#define GPIO_S5_DED_IRQ_6 73 +#define GPIO_S5_DED_IRQ_7 74 +#define GPIO_S5_DED_IRQ_8 75 +#define GPIO_S5_DED_IRQ_9 76 +#define GPIO_S5_DED_IRQ_10 77 +#define GPIO_S5_DED_IRQ_11 78 +#define GPIO_S5_DED_IRQ_12 79 +#define GPIO_S5_DED_IRQ_13 80 +#define GPIO_S5_DED_IRQ_14 81 +#define GPIO_S5_DED_IRQ_15 82 +/* DIRQs - Two levels of expansion to evaluate to numeric constants for ASL. */ +#define _GPIO_S0_DED_IRQ(slot) GPIO_S0_DED_IRQ_##slot +#define _GPIO_S5_DED_IRQ(slot) GPIO_S5_DED_IRQ_##slot +#define GPIO_S0_DED_IRQ(slot) _GPIO_S0_DED_IRQ(slot) +#define GPIO_S5_DED_IRQ(slot) _GPIO_S5_DED_IRQ(slot) /* PIC IRQ settings. */ #define PIRQ_PIC_IRQDISABLE 0x0 diff --git a/src/soc/intel/baytrail/gpio.c b/src/soc/intel/baytrail/gpio.c index 824ed6560b..8cc7cc0c0c 100644 --- a/src/soc/intel/baytrail/gpio.c +++ b/src/soc/intel/baytrail/gpio.c @@ -179,6 +179,25 @@ static void setup_gpio_route(const struct soc_gpio_map *sus, southcluster_smm_save_gpio_route(route_reg); } +static void setup_dirqs(const u8 dirq[GPIO_MAX_DIRQS], + const struct gpio_bank *bank) +{ + u32 reg = bank->pad_base + PAD_BASE_DIRQ_OFFSET; + u32 val; + int i; + + /* Write all four DIRQ registers */ + for (i=0; i<4; ++i) { + val = dirq[i * 4 + 3] << 24 | dirq[i * 4 + 2] << 16 | + dirq[i * 4 + 1] << 8 | dirq[i * 4]; + write32(reg + i * 4, val); +#ifdef GPIO_DEBUG + printk(BIOS_DEBUG, "Write DIRQ reg(%x) - %x\n", + reg + i * 4, val); +#endif + } +} + void setup_soc_gpios(struct soc_gpio_config *config) { if (config) { @@ -186,7 +205,13 @@ void setup_soc_gpios(struct soc_gpio_config *config) setup_gpios(config->score, &gpscore_bank); setup_gpios(config->ssus, &gpssus_bank); setup_gpio_route(config->ssus, config->score); + + if (config->core_dirq) + setup_dirqs(*config->core_dirq, &gpscore_bank); + if (config->sus_dirq) + setup_dirqs(*config->sus_dirq, &gpssus_bank); } + } struct soc_gpio_config* __attribute__((weak)) mainboard_get_gpios(void) |