diff options
| -rw-r--r-- | src/superio/winbond/w83627uhg/Config.lb | 22 | ||||
| -rw-r--r-- | src/superio/winbond/w83627uhg/chip.h | 29 | ||||
| -rw-r--r-- | src/superio/winbond/w83627uhg/superio.c | 176 | ||||
| -rw-r--r-- | src/superio/winbond/w83627uhg/w83627uhg.h | 35 | ||||
| -rw-r--r-- | src/superio/winbond/w83627uhg/w83627uhg_early_serial.c | 58 |
5 files changed, 320 insertions, 0 deletions
diff --git a/src/superio/winbond/w83627uhg/Config.lb b/src/superio/winbond/w83627uhg/Config.lb new file mode 100644 index 0000000000..18b1abbef9 --- /dev/null +++ b/src/superio/winbond/w83627uhg/Config.lb @@ -0,0 +1,22 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2009 Dynon Avionics +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 $ +## + +config chip.h +object superio.o diff --git a/src/superio/winbond/w83627uhg/chip.h b/src/superio/winbond/w83627uhg/chip.h new file mode 100644 index 0000000000..fa1a653516 --- /dev/null +++ b/src/superio/winbond/w83627uhg/chip.h @@ -0,0 +1,29 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Dynon Avionics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 $ + */ + +#include <pc80/keyboard.h> +#include <uart8250.h> + +extern struct chip_operations superio_winbond_w83627uhg_ops; + +struct superio_winbond_w83627uhg_config { + struct uart8250 com1, com2, com3, com4, com5, com6; + struct pc_keyboard keyboard; +}; diff --git a/src/superio/winbond/w83627uhg/superio.c b/src/superio/winbond/w83627uhg/superio.c new file mode 100644 index 0000000000..796b20a8dc --- /dev/null +++ b/src/superio/winbond/w83627uhg/superio.c @@ -0,0 +1,176 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Dynon Avionics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 $ + */ + +#include <arch/io.h> +#include <device/device.h> +#include <device/pnp.h> +#include <console/console.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#include <bitops.h> +#include <uart8250.h> +#include <pc80/keyboard.h> +#include "chip.h" +#include "w83627uhg.h" + +static void w83627uhg_enter_ext_func_mode(device_t dev) +{ + outb(0x87, dev->path.u.pnp.port); + outb(0x87, dev->path.u.pnp.port); +} + +static void w83627uhg_exit_ext_func_mode(device_t dev) +{ + outb(0xaa, dev->path.u.pnp.port); +} + +/* + * Set the UART clock source. + * + * Possible UART clock source speeds are: + * + * 0 = 1.8462 MHz (default) + * 1 = 2 MHz + * 2 = 24 MHz + * 3 = 14.769 MHz + * + * The faster clocks allow for BAUD rates up to 2mbits. + * + * Warning: The kernel will need to be adjusted since it assumes + * a 1.8462 MHz clock. + */ +static void set_uart_clock_source(device_t dev, u8 uart_clock) +{ + u8 value; + + w83627uhg_enter_ext_func_mode(dev); + pnp_set_logical_device(dev); + value = pnp_read_config(dev, 0xf0); + value &= ~0x03; + value |= (uart_clock & 0x03); + pnp_write_config(dev, 0xf0, value); + w83627uhg_exit_ext_func_mode(dev); +} + +static void w83627uhg_init(device_t dev) +{ + struct superio_winbond_w83627uhg_config *conf; + struct resource *res0, *res1; + + if (!dev->enabled) + return; + + conf = dev->chip_info; + switch(dev->path.u.pnp.device) { + case W83627UHG_SP1: + res0 = find_resource(dev, PNP_IDX_IO0); + /* set_uart_clock_source(dev, 0); */ + init_uart8250(res0->base, &conf->com1); + break; + case W83627UHG_SP2: + res0 = find_resource(dev, PNP_IDX_IO0); + /* set_uart_clock_source(dev, 0); */ + init_uart8250(res0->base, &conf->com2); + break; + case W83627UHG_SP3: + res0 = find_resource(dev, PNP_IDX_IO0); + /* set_uart_clock_source(dev, 0); */ + init_uart8250(res0->base, &conf->com3); + break; + case W83627UHG_SP4: + res0 = find_resource(dev, PNP_IDX_IO0); + /* set_uart_clock_source(dev, 0); */ + init_uart8250(res0->base, &conf->com4); + break; + case W83627UHG_SP5: + res0 = find_resource(dev, PNP_IDX_IO0); + /* set_uart_clock_source(dev, 0); */ + init_uart8250(res0->base, &conf->com5); + break; + case W83627UHG_SP6: + res0 = find_resource(dev, PNP_IDX_IO0); + /* set_uart_clock_source(dev, 0); */ + init_uart8250(res0->base, &conf->com6); + break; + case W83627UHG_KBC: + res0 = find_resource(dev, PNP_IDX_IO0); + res1 = find_resource(dev, PNP_IDX_IO1); + init_pc_keyboard(res0->base, res1->base, &conf->keyboard); + break; + } +} + +static void w83627uhg_set_resources(device_t dev) +{ + w83627uhg_enter_ext_func_mode(dev); + pnp_set_resources(dev); + w83627uhg_exit_ext_func_mode(dev); +} + +static void w83627uhg_enable_resources(device_t dev) +{ + w83627uhg_enter_ext_func_mode(dev); + pnp_enable_resources(dev); + w83627uhg_exit_ext_func_mode(dev); +} + +static void w83627uhg_enable(device_t dev) +{ + w83627uhg_enter_ext_func_mode(dev); + pnp_enable(dev); + w83627uhg_exit_ext_func_mode(dev); +} + +static struct device_operations ops = { + .read_resources = pnp_read_resources, + .set_resources = w83627uhg_set_resources, + .enable_resources = w83627uhg_enable_resources, + .enable = w83627uhg_enable, + .init = w83627uhg_init, +}; + +static struct pnp_info pnp_dev_info[] = { + { &ops, W83627UHG_FDC, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, }, + { &ops, W83627UHG_PP, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, { 0x07f8, 0}, }, + { &ops, W83627UHG_SP1, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, W83627UHG_SP2, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, W83627UHG_KBC, PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_IRQ1, { 0x7ff, 0 }, { 0x7ff, 0x4}, }, + { &ops, W83627UHG_SP3, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, W83627UHG_GPIO3_4, }, + { &ops, W83627UHG_WDTO_PLED_GPIO5_6, }, + { &ops, W83627UHG_GPIO1_2,}, + { &ops, W83627UHG_ACPI, PNP_IRQ0, }, + { &ops, W83627UHG_HWM, PNP_IO0 | PNP_IRQ0, { 0xff8, 0 } }, + { &ops, W83627UHG_PECI_SST,}, + { &ops, W83627UHG_SP4, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, W83627UHG_SP5, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, + { &ops, W83627UHG_SP6, PNP_IO0 | PNP_IRQ0, { 0x7f8, 0 }, }, +}; + +static void enable_dev(device_t dev) +{ + pnp_enable_devices(dev, &ops, ARRAY_SIZE(pnp_dev_info), pnp_dev_info); +} + +struct chip_operations superio_winbond_w83627uhg_ops = { + CHIP_NAME("Winbond W83627UHG Super I/O") + .enable_dev = enable_dev, +}; diff --git a/src/superio/winbond/w83627uhg/w83627uhg.h b/src/superio/winbond/w83627uhg/w83627uhg.h new file mode 100644 index 0000000000..4dd168e9e6 --- /dev/null +++ b/src/superio/winbond/w83627uhg/w83627uhg.h @@ -0,0 +1,35 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Dynon Avionics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 $ + */ + +#define W83627UHG_FDC 0 /* Floppy */ +#define W83627UHG_PP 1 /* Parallel port */ +#define W83627UHG_SP1 2 /* Com1 */ +#define W83627UHG_SP2 3 /* Com2 */ +#define W83627UHG_KBC 5 /* PS/2 keyboard & mouse */ +#define W83627UHG_SP3 6 /* Com3 */ +#define W83627UHG_GPIO3_4 7 /* GPIO 3/4 */ +#define W83627UHG_WDTO_PLED_GPIO5_6 8 /* WDTO#, PLED, GPIO5/6 */ +#define W83627UHG_GPIO1_2 9 /* GPIO 1/2, SUSLED */ +#define W83627UHG_ACPI 10 /* ACPI */ +#define W83627UHG_HWM 11 /* Hardware monitor */ +#define W83627UHG_PECI_SST 12 /* PECI, SST */ +#define W83627UHG_SP4 13 /* Com4 */ +#define W83627UHG_SP5 14 /* Com5 */ +#define W83627UHG_SP6 15 /* Com6 */ diff --git a/src/superio/winbond/w83627uhg/w83627uhg_early_serial.c b/src/superio/winbond/w83627uhg/w83627uhg_early_serial.c new file mode 100644 index 0000000000..ea79636726 --- /dev/null +++ b/src/superio/winbond/w83627uhg/w83627uhg_early_serial.c @@ -0,0 +1,58 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2009 Dynon Avionics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/romcc_io.h> +#include <stdint.h> +#include "w83627uhg.h" + +static void pnp_enter_ext_func_mode(device_t dev) +{ + u16 port = dev >> 8; + outb(0x87, port); + outb(0x87, port); +} + +static void pnp_exit_ext_func_mode(device_t dev) +{ + u16 port = dev >> 8; + outb(0xaa, port); +} + +/** Set the input clock to 24 or 48 MHz. */ +static void w83627uhg_set_input_clk_sel(device_t dev, u8 speed_24mhz) +{ + u8 value; + + value = pnp_read_config(dev, 0x24); + value &= ~(1 << 6); + if (!speed_24mhz) + value |= (1 << 6); + pnp_write_config(dev, 0x24, value); +} + +static void w83627uhg_enable_serial(device_t dev, u32 iobase) +{ + pnp_enter_ext_func_mode(dev); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 0); + pnp_set_iobase(dev, PNP_IDX_IO0, iobase); + pnp_set_enable(dev, 1); + pnp_exit_ext_func_mode(dev); +} |