summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/mainboard/gigabyte/m57sli/Config.lb54
1 files changed, 53 insertions, 1 deletions
diff --git a/src/mainboard/gigabyte/m57sli/Config.lb b/src/mainboard/gigabyte/m57sli/Config.lb
index 4b19454949..8d6ab1ba61 100644
--- a/src/mainboard/gigabyte/m57sli/Config.lb
+++ b/src/mainboard/gigabyte/m57sli/Config.lb
@@ -239,7 +239,12 @@ chip northbridge/amd/amdk8/root_complex
device pci 0.0 on end # HT
device pci 1.0 on # LPC
chip superio/ite/it8716f
- device pnp 2e.0 off # Floppy
+ # Floppy and any LDN
+ device pnp 2e.0 off
+ # Watchdog from CLKIN, CLKIN = 24 MHz
+ irq 0x23 = 0x11
+ # Serial Flash (SPI only)
+ #0x24 = 0x1a
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
@@ -269,6 +274,52 @@ chip northbridge/amd/amdk8/root_complex
device pnp 2e.6 on # Mouse
irq 0x70 = 12
end
+ device pnp 2e.7 on # GPIO, SPI flash
+ # pin 84 is not GP10
+ irq 0x25 = 0x0
+ # pin 21 is GP26, pin 26 is GP21, pin 27 is GP20
+ irq 0x26 = 0x43
+ # pin 13 is GP35
+ irq 0x27 = 0x20
+ # pin 70 is not GP46
+ #0x28 = 0x0
+ # pin 6,3,128,127,126 is GP63,64,65,66,67
+ irq 0x29 = 0x81
+ # Enable FAN_CTL/FAN_TAC set to 5 (pin 21,23), enable FAN_CTL/FAN_TAC set to 4 (pin 20,22), pin 48 is PCIRST5#, pin91 is PCIRSTIN#, VIN7 is internal voltage divider for VCCH5V, pin 95 is ATXPG, VIN3 is internal voltage divider for VCC5V
+ #0x2c = 0x1f
+ # Simple I/O base
+ io 0x62 = 0x800
+ # Serial Flash I/O (SPI only)
+ #io 0x64 = 0x820
+ # watch dog force timeout (parallel flash only)
+ #0x71 = 0x1
+ # No WDT interrupt
+ irq 0x72 = 0x0
+ # GPIO pin set 1 disable internal pullup
+ irq 0xb8 = 0x0
+ # GPIO pin set 5 enable internal pullup
+ irq 0xbc = 0x01
+ # SIO pin set 1 alternate function
+ #0xc0 = 0x0
+ # SIO pin set 2 mixed function
+ irq 0xc1 = 0x43
+ # SIO pin set 3 mixed function
+ irq 0xc2 = 0x20
+ # SIO pin set 4 alternate function
+ #0xc3 = 0x0
+ # SIO pin set 1 input mode
+ #0xc8 = 0x0
+ # SIO pin set 2 mixed input/output mode
+ irq 0xc9 = 0x0
+ # SIO pin set 4 input mode
+ #0xcb = 0x0
+ # Generate SMI# on EC IRQ
+ #0xf0 = 0x10
+ # SMI# level trigger
+ #0xf1 = 0x40
+ # HWMON alert beep pin location
+ irq 0xf6 = 0x28
+ end
device pnp 2e.8 off # MIDI
io 0x60 = 0x300
irq 0x70 = 10
@@ -305,6 +356,7 @@ chip northbridge/amd/amdk8/root_complex
device i2c 57 on end
end
end # SM
+#WTF?!? We already have device pci 1.1 in the section above
device pci 1.1 on # SM 1
#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
# chip drivers/generic/generic #PCIXA Slot1