summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/Kconfig.deprecated_options10
-rw-r--r--src/arch/x86/boot/coreboot_table.c2
-rw-r--r--src/arch/x86/include/arch/interrupt.h2
-rw-r--r--src/devices/oprom/yabel/device.c18
-rw-r--r--src/devices/oprom/yabel/interrupt.c23
-rw-r--r--src/devices/oprom/yabel/io.c12
-rw-r--r--src/devices/oprom/yabel/mem.c4
-rw-r--r--src/devices/pci_rom.c2
-rw-r--r--src/devices/pciexp_device.c4
-rw-r--r--src/include/cpu/x86/mtrr.h4
-rw-r--r--src/mainboard/kontron/986lcd-m/mainboard.c6
-rw-r--r--src/northbridge/intel/i82830/smihandler.c2
-rw-r--r--src/northbridge/intel/i82830/vga.c4
-rw-r--r--src/northbridge/intel/i945/raminit.c18
-rw-r--r--src/southbridge/via/k8t890/early_car.c10
-rw-r--r--src/southbridge/via/vt8237r/lpc.c2
-rw-r--r--src/superio/ite/it8716f/it8716f.h2
-rw-r--r--src/superio/ite/it8716f/superio.c2
18 files changed, 68 insertions, 59 deletions
diff --git a/src/Kconfig.deprecated_options b/src/Kconfig.deprecated_options
index aa32d0d864..d83525e541 100644
--- a/src/Kconfig.deprecated_options
+++ b/src/Kconfig.deprecated_options
@@ -51,4 +51,14 @@ config DRIVERS_PS2_KEYBOARD
this option, then you can say N here to speed up boot time.
Otherwise say Y.
+# This was a config option for a long time, but it never showed up in Kconfig.
+# It should go away and "tuning" should always be enabled when PCIe is there,
+# or it should be more fine grained (ie. Enable PCIe ASPM)
+config PCIE_TUNING
+ bool
+ default n
+ help
+ This variable enables certain PCIe optimizations. Right now it's
+ only ASPM and it's untested.
+
endmenu
diff --git a/src/arch/x86/boot/coreboot_table.c b/src/arch/x86/boot/coreboot_table.c
index 8e7c75eaa1..634cefd439 100644
--- a/src/arch/x86/boot/coreboot_table.c
+++ b/src/arch/x86/boot/coreboot_table.c
@@ -145,7 +145,7 @@ static void lb_console(struct lb_header *header)
static void lb_framebuffer(struct lb_header *header)
{
-#if defined(CONFIG_BOOTSPLASH) && CONFIG_BOOTSPLASH && CONFIG_COREBOOT_KEEP_FRAMEBUFFER
+#if CONFIG_BOOTSPLASH && CONFIG_COREBOOT_KEEP_FRAMEBUFFER
void fill_lb_framebuffer(struct lb_framebuffer *framebuffer);
struct lb_framebuffer *framebuffer;
diff --git a/src/arch/x86/include/arch/interrupt.h b/src/arch/x86/include/arch/interrupt.h
index c3cda309b9..83821f47e6 100644
--- a/src/arch/x86/include/arch/interrupt.h
+++ b/src/arch/x86/include/arch/interrupt.h
@@ -22,7 +22,7 @@
#include "registers.h"
/* setup interrupt handlers for mainboard */
-#if defined(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) && CONFIG_PCI_OPTION_ROM_RUN_REALMODE
+#if CONFIG_PCI_OPTION_ROM_RUN_REALMODE
extern void mainboard_interrupt_handlers(int intXX, void *intXX_func);
#else
static inline void mainboard_interrupt_handlers(int intXX, void *intXX_func) { }
diff --git a/src/devices/oprom/yabel/device.c b/src/devices/oprom/yabel/device.c
index dd078c72c6..82595945a8 100644
--- a/src/devices/oprom/yabel/device.c
+++ b/src/devices/oprom/yabel/device.c
@@ -37,7 +37,7 @@ typedef struct {
u64 size;
} __attribute__ ((__packed__)) assigned_address_t;
-#ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
/* coreboot version */
static void
@@ -110,7 +110,7 @@ biosemu_dev_get_addr_info(void)
}
// store last entry index of translate_address_array
taa_last_entry = taa_index - 1;
-#if defined(CONFIG_X86EMU_DEBUG) && CONFIG_X86EMU_DEBUG
+#if CONFIG_X86EMU_DEBUG
//dump translate_address_array
printf("translate_address_array: \n");
translate_address_t ta;
@@ -194,7 +194,7 @@ biosemu_dev_get_addr_info(void)
}
// store last entry index of translate_address_array
taa_last_entry = taa_index - 1;
-#if defined(CONFIG_X86EMU_DEBUG) && CONFIG_X86EMU_DEBUG
+#if CONFIG_X86EMU_DEBUG
//dump translate_address_array
printf("translate_address_array: \n");
translate_address_t ta;
@@ -226,7 +226,7 @@ biosemu_add_special_memory(u32 start, u32 size)
translate_address_array[taa_index].address_offset = 0;
}
-#ifndef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if !CONFIG_PCI_OPTION_ROM_RUN_YABEL
// to simulate accesses to legacy VGA Memory (0xA0000-0xBFFFF)
// we look for the first prefetchable memory BAR, if no prefetchable BAR found,
// we use the first memory BAR
@@ -288,7 +288,7 @@ biosemu_dev_get_device_vendor_id(void)
{
u32 pci_config_0;
-#ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
pci_config_0 = pci_read_config32(bios_device.dev, 0x0);
#else
pci_config_0 =
@@ -350,7 +350,7 @@ biosemu_dev_check_exprom(unsigned long rom_base_addr)
memcpy(&pci_ds, (void *) (rom_base_addr + pci_ds_offset),
sizeof(pci_ds));
clr_ci();
-#if defined(CONFIG_X86EMU_DEBUG) && CONFIG_X86EMU_DEBUG
+#if CONFIG_X86EMU_DEBUG
DEBUG_PRINTF("PCI Data Structure @%lx:\n",
rom_base_addr + pci_ds_offset);
dump((void *) &pci_ds, sizeof(pci_ds));
@@ -412,7 +412,7 @@ biosemu_dev_init(struct device * device)
DEBUG_PRINTF("%s\n", __func__);
memset(&bios_device, 0, sizeof(bios_device));
-#ifndef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if !CONFIG_PCI_OPTION_ROM_RUN_YABEL
bios_device.ihandle = of_open(device_name);
if (bios_device.ihandle == 0) {
DEBUG_PRINTF("%s is no valid device!\n", device_name);
@@ -423,7 +423,7 @@ biosemu_dev_init(struct device * device)
bios_device.dev = device;
#endif
biosemu_dev_get_addr_info();
-#ifndef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if !CONFIG_PCI_OPTION_ROM_RUN_YABEL
biosemu_dev_find_vmem_addr();
biosemu_dev_get_puid();
#endif
@@ -440,7 +440,7 @@ biosemu_dev_translate_address(int type, unsigned long * addr)
{
int i = 0;
translate_address_t ta;
-#ifndef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if !CONFIG_PCI_OPTION_ROM_RUN_YABEL
/* we dont need this hack for coreboot... we can access legacy areas */
//check if it is an access to legacy VGA Mem... if it is, map the address
//to the vmem BAR and then translate it...
diff --git a/src/devices/oprom/yabel/interrupt.c b/src/devices/oprom/yabel/interrupt.c
index af79379f67..e5b4a3cff4 100644
--- a/src/devices/oprom/yabel/interrupt.c
+++ b/src/devices/oprom/yabel/interrupt.c
@@ -24,7 +24,7 @@
#include <x86emu/x86emu.h>
#include "../x86emu/prim_ops.h"
-#ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
#include <device/pci.h>
#include <device/pci_ops.h>
#endif
@@ -343,7 +343,7 @@ handleInt1a(void)
DEBUG_PRINTF_INTR("%s(): function: %x: PCI Find Device\n",
__func__, M.x86.R_AX);
/* FixME: support SI != 0 */
-#if defined(CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES) && CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES==1
+#if CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES
dev = dev_find_device(M.x86.R_DX, M.x86.R_CX, 0);
if (dev != 0) {
DEBUG_PRINTF_INTR
@@ -384,7 +384,7 @@ handleInt1a(void)
offs = M.x86.R_DI;
DEBUG_PRINTF_INTR("%s(): function: %x: PCI Config Read from device: bus: %02x, devfn: %02x, offset: %02x\n",
__func__, M.x86.R_AX, bus, devfn, offs);
-#if defined(CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES) && CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES==1
+#if CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES
dev = dev_find_slot(bus, devfn);
DEBUG_PRINTF_INTR("%s(): function: %x: dev_find_slot() returned: %s\n",
__func__, M.x86.R_AX, dev_path(dev));
@@ -408,7 +408,7 @@ handleInt1a(void)
switch (M.x86.R_AX) {
case 0xb108:
M.x86.R_CL =
-#ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
pci_read_config8(dev, offs);
#else
(u8) rtas_pci_config_read(bios_device.
@@ -423,7 +423,7 @@ handleInt1a(void)
break;
case 0xb109:
M.x86.R_CX =
-#ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
pci_read_config16(dev, offs);
#else
(u16) rtas_pci_config_read(bios_device.
@@ -438,7 +438,7 @@ handleInt1a(void)
break;
case 0xb10a:
M.x86.R_ECX =
-#ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
pci_read_config32(dev, offs);
#else
(u32) rtas_pci_config_read(bios_device.
@@ -476,7 +476,7 @@ handleInt1a(void)
} else {
switch (M.x86.R_AX) {
case 0xb10b:
-#ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
pci_write_config8(bios_device.dev, offs, M.x86.R_CL);
#else
rtas_pci_config_write(bios_device.puid, 1, bus,
@@ -488,7 +488,7 @@ handleInt1a(void)
M.x86.R_CL);
break;
case 0xb10c:
-#ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
pci_write_config16(bios_device.dev, offs, M.x86.R_CX);
#else
rtas_pci_config_write(bios_device.puid, 2, bus,
@@ -500,7 +500,7 @@ handleInt1a(void)
M.x86.R_CX);
break;
case 0xb10d:
-#ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
pci_write_config32(bios_device.dev, offs, M.x86.R_ECX);
#else
rtas_pci_config_write(bios_device.puid, 4, bus,
@@ -576,8 +576,9 @@ handleInterrupt(int intNum)
int_handled = 1;
break;
case PMM_INT_NUM:
- /* the selfdefined PMM INT number, this is called by the code in PMM struct, it
- * is handled by pmm_handleInt()
+ /* The self-defined PMM INT number, this is called by
+ * the code in PMM struct, and it is handled by
+ * pmm_handleInt()
*/
pmm_handleInt();
int_handled = 1;
diff --git a/src/devices/oprom/yabel/io.c b/src/devices/oprom/yabel/io.c
index 20340470b0..00bb1a0d2f 100644
--- a/src/devices/oprom/yabel/io.c
+++ b/src/devices/oprom/yabel/io.c
@@ -19,13 +19,13 @@
#include <x86emu/x86emu.h>
#include "io.h"
-#ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
#include <device/pci.h>
#include <device/pci_ops.h>
#include <device/resource.h>
#endif
-#ifdef CONFIG_ARCH_X86
+#if CONFIG_ARCH_X86
#include <arch/io.h>
#else
// these are not used, only needed for linking, must be overridden using X86emu_setupPioFuncs
@@ -76,7 +76,7 @@ inl(u16 port)
}
#endif
-#if defined(CONFIG_YABEL_DIRECTHW) && (CONFIG_YABEL_DIRECTHW == 1)
+#if CONFIG_YABEL_DIRECTHW
u8 my_inb(X86EMU_pioAddr addr)
{
u8 val;
@@ -455,7 +455,7 @@ pci_cfg_read(X86EMU_pioAddr addr, u8 size)
offs += (addr - 0xCFC); // if addr is not 0xcfc, the offset is moved accordingly
DEBUG_PRINTF_INTR("%s(): PCI Config Read from device: bus: %02x, devfn: %02x, offset: %02x\n",
__func__, bus, devfn, offs);
-#if defined(CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES) && CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES==1
+#if CONFIG_YABEL_PCI_ACCESS_OTHER_DEVICES
dev = dev_find_slot(bus, devfn);
DEBUG_PRINTF_INTR("%s(): dev_find_slot() returned: %s\n",
__func__, dev_path(dev));
@@ -475,7 +475,7 @@ pci_cfg_read(X86EMU_pioAddr addr, u8 size)
HALT_SYS();
return 0;
} else {
-#ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
switch (size) {
case 1:
rval = pci_read_config8(dev, offs);
@@ -526,7 +526,7 @@ pci_cfg_write(X86EMU_pioAddr addr, u32 val, u8 size)
bus, devfn >> 3, devfn & 7, offs);
HALT_SYS();
} else {
-#ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
switch (size) {
case 1:
pci_write_config8(bios_device.dev, offs, val);
diff --git a/src/devices/oprom/yabel/mem.c b/src/devices/oprom/yabel/mem.c
index 8ca42b0e90..4b4a552813 100644
--- a/src/devices/oprom/yabel/mem.c
+++ b/src/devices/oprom/yabel/mem.c
@@ -19,9 +19,9 @@
#include "mem.h"
#include "compat/time.h"
-#if !defined(CONFIG_YABEL_DIRECTHW) || (!CONFIG_YABEL_DIRECTHW)
+#if !CONFIG_YABEL_DIRECTHW || !CONFIG_YABEL_DIRECTHW
-#ifdef CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
#include <device/resource.h>
#endif
diff --git a/src/devices/pci_rom.c b/src/devices/pci_rom.c
index e721eb5751..56712df5c5 100644
--- a/src/devices/pci_rom.c
+++ b/src/devices/pci_rom.c
@@ -46,7 +46,7 @@ struct rom_header *pci_rom_probe(struct device *dev)
rom_address = pci_read_config32(dev, PCI_ROM_ADDRESS);
if (rom_address == 0x00000000 || rom_address == 0xffffffff) {
-#if defined(CONFIG_BOARD_EMULATION_QEMU_X86) && CONFIG_BOARD_EMULATION_QEMU_X86
+#if CONFIG_BOARD_EMULATION_QEMU_X86
if ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA)
rom_address = 0xc0000;
else
diff --git a/src/devices/pciexp_device.c b/src/devices/pciexp_device.c
index b190285c3b..5d339423ff 100644
--- a/src/devices/pciexp_device.c
+++ b/src/devices/pciexp_device.c
@@ -27,7 +27,7 @@
static void pciexp_tune_dev(device_t dev)
{
unsigned int cap;
-#ifdef CONFIG_PCIE_TUNING
+#if CONFIG_PCIE_TUNING
u32 reg32;
#endif
@@ -35,7 +35,7 @@ static void pciexp_tune_dev(device_t dev)
if (!cap)
return;
-#ifdef CONFIG_PCIE_TUNING
+#if CONFIG_PCIE_TUNING
printk(BIOS_DEBUG, "PCIe: tuning %s\n", dev_path(dev));
// TODO make this depending on ASPM.
diff --git a/src/include/cpu/x86/mtrr.h b/src/include/cpu/x86/mtrr.h
index 6ab6bec015..5f0a8f2e4a 100644
--- a/src/include/cpu/x86/mtrr.h
+++ b/src/include/cpu/x86/mtrr.h
@@ -1,7 +1,6 @@
#ifndef CPU_X86_MTRR_H
#define CPU_X86_MTRR_H
-
/* These are the region types */
#define MTRR_TYPE_UNCACHEABLE 0
#define MTRR_TYPE_WRCOMB 1
@@ -64,11 +63,10 @@ void x86_setup_fixed_mtrrs(void);
# error "CONFIG_XIP_ROM_BASE is not a multiple of CONFIG_XIP_ROM_SIZE"
#endif
-#if (CONFIG_RAMTOP & (CONFIG_RAMTOP -1)) != 0
+#if (CONFIG_RAMTOP & (CONFIG_RAMTOP - 1)) != 0
# error "CONFIG_RAMTOP must be a power of 2"
#endif
-
#if !defined (__ASSEMBLER__)
#if defined(CONFIG_XIP_ROM_SIZE)
# if defined(CONFIG_TINY_BOOTBLOCK) && CONFIG_TINY_BOOTBLOCK
diff --git a/src/mainboard/kontron/986lcd-m/mainboard.c b/src/mainboard/kontron/986lcd-m/mainboard.c
index c7a50db9e4..1d0c4946b2 100644
--- a/src/mainboard/kontron/986lcd-m/mainboard.c
+++ b/src/mainboard/kontron/986lcd-m/mainboard.c
@@ -20,14 +20,14 @@
#include <types.h>
#include <device/device.h>
#include <console/console.h>
-#if defined(CONFIG_PCI_OPTION_ROM_RUN_YABEL) && CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
#include <x86emu/x86emu.h>
#endif
#include <pc80/mc146818rtc.h>
#include <arch/io.h>
#include "chip.h"
-#if defined(CONFIG_PCI_OPTION_ROM_RUN_YABEL) && CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
static int int15_handler(void)
{
#define BOOT_DISPLAY_DEFAULT 0
@@ -221,7 +221,7 @@ static void verb_setup(void)
static void mainboard_enable(device_t dev)
{
-#if defined(CONFIG_PCI_OPTION_ROM_RUN_YABEL) && CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
/* Install custom int15 handler for VGA OPROM */
int15_install();
#endif
diff --git a/src/northbridge/intel/i82830/smihandler.c b/src/northbridge/intel/i82830/smihandler.c
index 852c764608..f7c6b5af25 100644
--- a/src/northbridge/intel/i82830/smihandler.c
+++ b/src/northbridge/intel/i82830/smihandler.c
@@ -37,7 +37,7 @@ extern u32 mbi_len;
/* If YABEL is enabled and it's not running at 0x00000000, we have to add some
* offset to all our mbi object memory accesses
*/
-#if defined(CONFIG_PCI_OPTION_ROM_RUN_YABEL) && CONFIG_PCI_OPTION_ROM_RUN_YABEL && !CONFIG_YABEL_DIRECTHW
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL && !CONFIG_YABEL_DIRECTHW
#define OBJ_OFFSET CONFIG_YABEL_VIRTMEM_LOCATION
#else
#define OBJ_OFFSET 0x00000
diff --git a/src/northbridge/intel/i82830/vga.c b/src/northbridge/intel/i82830/vga.c
index 21c677960e..c82c484a3a 100644
--- a/src/northbridge/intel/i82830/vga.c
+++ b/src/northbridge/intel/i82830/vga.c
@@ -25,7 +25,7 @@
#include <device/pci.h>
#include <device/pci_ids.h>
#include <cbfs.h>
-#if defined(CONFIG_PCI_OPTION_ROM_RUN_YABEL) && CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
#include <x86emu/x86emu.h>
#endif
@@ -62,7 +62,7 @@ static void vga_init(device_t dev)
printk(BIOS_INFO, "Graphics Initialization Complete\n");
/* Enable TV-Out */
-#if defined(CONFIG_PCI_OPTION_ROM_RUN_YABEL) && CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
#define PIPE_A_CRT (1 << 0)
#define PIPE_A_LFP (1 << 1)
#define PIPE_A_TV (1 << 3)
diff --git a/src/northbridge/intel/i945/raminit.c b/src/northbridge/intel/i945/raminit.c
index a9e4a910e2..a7fbaa4439 100644
--- a/src/northbridge/intel/i945/raminit.c
+++ b/src/northbridge/intel/i945/raminit.c
@@ -113,7 +113,7 @@ void sdram_dump_mchbar_registers(void)
static int memclk(void)
{
int offset = 0;
-#if defined(CONFIG_NORTHBRIDGE_INTEL_I945GM)
+#if CONFIG_NORTHBRIDGE_INTEL_I945GM
offset++;
#endif
switch (((MCHBAR32(CLKCFG) >> 4) & 7) - offset) {
@@ -125,7 +125,7 @@ static int memclk(void)
return -1;
}
-#if defined(CONFIG_NORTHBRIDGE_INTEL_I945GM)
+#if CONFIG_NORTHBRIDGE_INTEL_I945GM
static u16 fsbclk(void)
{
switch (MCHBAR32(CLKCFG) & 7) {
@@ -136,7 +136,7 @@ static u16 fsbclk(void)
}
return 0xffff;
}
-#elif defined(CONFIG_NORTHBRIDGE_INTEL_I945GC)
+#elif CONFIG_NORTHBRIDGE_INTEL_I945GC
static u16 fsbclk(void)
{
switch (MCHBAR32(CLKCFG) & 7) {
@@ -1075,7 +1075,7 @@ static const u32 *slew_group_lookup(int dual_channel, int index)
return nc;
}
-#if defined(CONFIG_NORTHBRIDGE_INTEL_I945GM)
+#if CONFIG_NORTHBRIDGE_INTEL_I945GM
/* Strength multiplier tables */
static const u8 dual_channel_strength_multiplier[] = {
0x44, 0x11, 0x11, 0x11, 0x44, 0x44, 0x44, 0x11,
@@ -1130,7 +1130,7 @@ static const u8 single_channel_strength_multiplier[] = {
0x33, 0x00, 0x00, 0x11, 0x00, 0x44, 0x33, 0x11,
0x33, 0x00, 0x11, 0x00, 0x44, 0x44, 0x33, 0x11
};
-#elif defined(CONFIG_NORTHBRIDGE_INTEL_I945GC)
+#elif CONFIG_NORTHBRIDGE_INTEL_I945GC
static const u8 dual_channel_strength_multiplier[] = {
0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22,
0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22,
@@ -2186,7 +2186,7 @@ static void sdram_program_clock_crossing(void)
/**
* We add the indices according to our clocks from CLKCFG.
*/
-#if defined(CONFIG_NORTHBRIDGE_INTEL_I945GM)
+#if CONFIG_NORTHBRIDGE_INTEL_I945GM
static const u32 data_clock_crossing[] = {
0x00100401, 0x00000000, /* DDR400 FSB400 */
0xffffffff, 0xffffffff, /* nonexistant */
@@ -2231,7 +2231,7 @@ static void sdram_program_clock_crossing(void)
0xffffffff, 0xffffffff, /* nonexistant */
};
-#elif defined(CONFIG_NORTHBRIDGE_INTEL_I945GC)
+#elif CONFIG_NORTHBRIDGE_INTEL_I945GC
/* i945 G/P */
static const u32 data_clock_crossing[] = {
0xffffffff, 0xffffffff, /* nonexistant */
@@ -2822,9 +2822,9 @@ static void sdram_enable_memory_clocks(struct sys_info *sysinfo)
{
u8 clocks[2] = { 0, 0 };
-#if defined(CONFIG_NORTHBRIDGE_INTEL_I945GM)
+#if CONFIG_NORTHBRIDGE_INTEL_I945GM
#define CLOCKS_WIDTH 2
-#elif defined(CONFIG_NORTHBRIDGE_INTEL_I945GC)
+#elif CONFIG_NORTHBRIDGE_INTEL_I945GC
#define CLOCKS_WIDTH 3
#endif
if (sysinfo->dimm[0] != SYSINFO_DIMM_NOT_POPULATED)
diff --git a/src/southbridge/via/k8t890/early_car.c b/src/southbridge/via/k8t890/early_car.c
index 240e5aa75e..3fb70033df 100644
--- a/src/southbridge/via/k8t890/early_car.c
+++ b/src/southbridge/via/k8t890/early_car.c
@@ -69,15 +69,15 @@ u8 k8t890_early_setup_ht(void)
ldtnr = 2;
}
-#if defined(CONFIG_SOUTHBRIDGE_VIA_K8M800)
+#if CONFIG_SOUTHBRIDGE_VIA_K8M800
print_debug("K8M800 found at LDT ");
-#elif defined(CONFIG_SOUTHBRIDGE_VIA_K8T800)
+#elif CONFIG_SOUTHBRIDGE_VIA_K8T800
print_debug("K8T800 found at LDT ");
-#elif defined(CONFIG_SOUTHBRIDGE_VIA_K8T800PRO)
+#elif CONFIG_SOUTHBRIDGE_VIA_K8T800PRO
print_debug("K8T800 Pro found at LDT ");
-#elif defined(CONFIG_SOUTHBRIDGE_VIA_K8M890)
+#elif CONFIG_SOUTHBRIDGE_VIA_K8M890
print_debug("K8M890 found at LDT ");
-#elif defined(CONFIG_SOUTHBRIDGE_VIA_K8T890)
+#elif CONFIG_SOUTHBRIDGE_VIA_K8T890
print_debug("K8T890 found at LDT ");
#endif
print_debug_hex8(ldtnr);
diff --git a/src/southbridge/via/vt8237r/lpc.c b/src/southbridge/via/vt8237r/lpc.c
index 7dd013ba89..61f4989f54 100644
--- a/src/southbridge/via/vt8237r/lpc.c
+++ b/src/southbridge/via/vt8237r/lpc.c
@@ -300,7 +300,7 @@ static void vt8237r_init(struct device *dev)
pci_write_config8(dev, 0x48, 0x0c);
#else
- #if defined(CONFIG_SOUTHBRIDGE_VIA_K8T800)
+ #if CONFIG_SOUTHBRIDGE_VIA_K8T800
/* It seems that when we pair with the K8T800, we need to disable
* the A2 mask
*/
diff --git a/src/superio/ite/it8716f/it8716f.h b/src/superio/ite/it8716f/it8716f.h
index dde25153c7..384494df3c 100644
--- a/src/superio/ite/it8716f/it8716f.h
+++ b/src/superio/ite/it8716f/it8716f.h
@@ -36,7 +36,7 @@
#define IT8716F_GAME 0x09 /* GAME port */
#define IT8716F_IR 0x0a /* Consumer IR */
-#if defined(CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL) && CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL
+#if CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL
/* Provided by mainboard, called by IT8716F superio.c. */
void init_ec(u16 base);
#endif
diff --git a/src/superio/ite/it8716f/superio.c b/src/superio/ite/it8716f/superio.c
index 46d5c979fd..e04eb18fce 100644
--- a/src/superio/ite/it8716f/superio.c
+++ b/src/superio/ite/it8716f/superio.c
@@ -46,7 +46,7 @@ static void pnp_exit_ext_func_mode(device_t dev)
pnp_write_config(dev, 0x02, 0x02);
}
-#if !defined(CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL) || !CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL
+#if !CONFIG_SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL
static void pnp_write_index(u16 port_base, u8 reg, u8 value)
{
outb(reg, port_base);